TECHNICAL DOCUMENTATION

SSP 192 The Passat 1997 The Engineering

PDFEN75 pages2 MB
SSP 192 The Passat 1997 The Engineering - PDF cover

This PDF is currently unavailable.

Read document text
Service.192The Passat ‘97The EngineeringDesign and FunctionSelf Study ProgrammeFor internal use only. Ó VOLKSWAGEN AG, Wolfsburg All rights reserved. Specifications subject to change. 640.2810.11.10 Technical status: 11/96 ` Printed on chlorine-free bleached cellulose paper.Service Department The Passat ‘97SSP 192/107Having provided you with an initial overview of the new Passat in the Self Study Programme entitled “The Passat ‘97 – The Presentation”, we now want to describe in detail how the car’s various components are designed and how they function.The subjects of the VR5 engine, convenience electronics and navigation system are so wideranging that it would be beyond the scope of this Self Study Programme. We will therefore deal with them separately.2 PageIntroduction Vehicle Safety 1.8-ltr. 5V Engine ADR 1.8-ltr. 5V Turbo Engine AEB 2.8-ltr. V6 Engine ACK 1.9-ltr. TDI Engine AFN Gearbox Drive Shafts Running Gear ABS/EDL Electrics Air-conditioning04 06 20 22 26 34 38 40 43 48 55 60Important! / Note!New!This Self Study Programme is not a Workshop Manual! Please refer to the relevant Service Literature for all inspection, adjustment and repair instructions.3 IntroductionOverview of topicsEngines Given that the engine concepts used in the Passat ‘97 are tried and tested, we will confine ourselves solely to special innovations such as the variable valve timing featured in the 2.8-ltr. V6 engine.Gearbox Non-ferrous metals, such as aluminium or magnesium, are being used increasingly in vehicle construction. In this booklet we will explain the advantages and special features of magnesium components.Electrics You will be given information regarding the gas discharge headlights.Drive shafts We will explain how length compensation works in the triple roller drive shafts.4 ABS/EDL As a part of the ABS/EDL system, we will present you the new hydraulic unit with an integrated control unit.Running gear In addition to information about the torsion beam rear axle and the double wishbone rear axle, we will show you the new design of the new wheel bearing generation.SSP 192/001Air-conditioning The latest developments and the special features of the CLIMAtronic will be described.Vehicle safety We will describe the gradual action of the side airbag and the belt tensioner with belt force limiter.5 Vehicle SafetyMode of operation of the restraint systemsTwo different restraint systems are used in the new Passat: l Seat belts with belt tensioner and belt force limiter, used on all outer seats, l Front and side airbags for the driver and front passenger.Integrated front airbagsSeat with integrated side airbagDoor lockBelt tensioner with belt force limiterSSP 192/047Airbag control unitCentral module of convenience central locking systemSide airbag crash sensor6 Effect of the restraint systems during minor accidentsDuring minor accidents, the body only partially absorbs the impact energy of components such as bumpers and impact absorbers. belt tensioners restrain the car’s occupants in their seats. The belt force limiter reduces the risk of the belt causing injury. In this case, the airbags are not triggered.The seat belts provide adequate protection; theSSP 192/048 The belt tensioners are triggered mechanically on impact.7 Vehicle safetyThe effect of the restraint systems during serious accidentsDuring serious accidents, the car body absorbs the impact energy. The passenger compartment remains by and large intact and the airbags are triggered. In addition to the protection afforded by the seat belts, the restraint systems protect the front passengers from more serious injuries in the upper body and head areas. The car’s central locking system is opened.Airbags are triggered.Central locking system is opened.SSP 192/049The belt tensioners are triggered mechanically on impact.Airbag control unitCentral module of convenience central locking systemSide airbag crash sensorIN OUT8 Side airbagThe new side airbag system is integrated in the driver’s and front passenger’s seats. The side airbag is described as a thorax airbag. It mainly protects the thorax, and with it the lungs and pelvis, from lateral bruising. In terms of its appearance, the new airbag control unit has a different connector housing code to the previous model.Side airbag (illustrated as triggered)Airbag control unit J234Connection SSP 192/006 Crash-sensor G179When carrying out work on the airbag systems, always follow the instructions given in the Workshop Manuals.9 Vehicle safetySide airbag design The side airbags are integrated in the front seat backrests. The folded airbag and gas generator are accommodated inside the plastic housing. When the side airbag is triggered, the gas cartridges in the gas generator are opened and the pyrotechnical charge ignites. The highly pressurised gas contained inside the cartridge expands instantaneously, inflating the airbag. While expanding, the gas cools and mixes with the hot gas of the pyrotechnical charge. The temperature of the gas mixture is therefore so low that there is no risk of burning. The side airbag has a capacity of approx. 12 litres.HousingSSP 192/005Air bagGas generator with gas cartridge and pyrotechnical charge10 A two-stage crash recognition system is used to ensure reliable side airbag activation.Crash sensors G179/G180 The crash sensors for the side airbags are located below the two front seats on the seat cross members. They are conditioned to respond to lateral force application. The crash sensors are known as intelligent sensors. They operate independently of each other.SSP 192/070In addition to an electronic acceleration sensor, the entire electronics are integrated in the sensor housing. When a sensor recognises a crash, it sends a signal to the airbag control unit.When an impact occurs, the crash sensor G179 informs the airbag control unit that it has recognised a crash.SSP 192/11911 Vehicle safetyAirbag control unit J234 In parallel to the crash sensors, sensors in the airbag control unit evaluate the severity of the crash. The relevant side airbag is not triggered until these sensors have also rcognised that an accident has occurred and a crash sensor sends an airbag trigger request. The two crash sensors below the front seats perform a function check at regular intervals, providing feedback to the airbag control unit. The system status of the side airbags can be displayed via the self-diagnosis. The airbag control unit also indicates when a fault may possibly have occurred in the crash sensors or the side airbags via the airbag warning lamp. There is an additional energy storage device in the airbag control unit for igniting the side airbags. If the power supply fails during an accident, this energy storage device has sufficient energy to power the control unit and, if necessary, to ignite the airbags.Self-diagnosis: The self-diagnosis is started using address word “15”.The side airbag is triggered by the airbag control unit.The sensors in the control unit have recognised an accident in addition to crash sensor G178. SSP 192/12012 Belt tensionerThe pyrotechnical belt tensioner combines with the force limiter and the seat belt recognition device in a single unit. It is only triggered if the mechanical seat belt fastened recognition system recognises an unreeled belt. Its compact design makes for much easier replacement. When an impact occurs, the belt tensioners reel in the belt and thus take up any slack (clearance between belt and body). The mode of operation of the belt tensioner is very different to that of its predecessors.There are two belt tensioner variants: l A ball-driven belt tensioner, used on the front seats. l Belt tensioners operating according to the same principle as the Wankel engine, used on the rear seats.Front belt tensionerPropellant charge Trigger unit BeltBall retainerFeed tube containing ballsGearwheelSSP 192/126 13 Vehicle safetyFunctional description of front belt tensionerThe belt tensioner is activated by balls mounted in a feed tube.Mechanical trigger unitPropellant charge BeltFeed tube SSP 192/124When the belt tensioner is triggered, a pyrotechnical propellant charge ignites. It sets the balls in motion and drives them into the ball retainer via a gearwheel. The belt reeling device is driven by the kinetic energy of the balls, thus reeling in the belt.Belt reeling deviceGearwheel SSP 192/125Ball retainer14 Rear belt tensionerThe belt tensioner can be described in simpler terms as a “pyrotechnical Wankel engine”. This “Wankel engine” is driven by 3 propellant charges. They are ignited in succession.Belt tensioner triggering mechanismBeltLocking mechanism with child safety seat lockBelt force limiterSSP 192/066Reeling mechanismBelt tensioner15 Vehicle safetyFunctional description of rear belt tensioner.SSP 192/009The first propellant charge is ignited by a mechanical triggering device.Mech. triggering device Wankel rotor Firing pin Propellant chargeThe released gas causes the rotor to rotate. The belt is tightened. After a certain angle of rotation, the piston opens the inlet port of the second firing pin, thus igniting the second propellant charge.SSP 192/010The released gas makes the rotor rotate until the next inlet channel is opened. The third charge ignites.SSP 192/011The belt tensioner is able to perform approximately two full turns in this way.SSP 192/012 16 Belt force limiterFunctional description of belt force limiter If, due to acceleration, the tensile force of the belt is so high that bruising or internal injuries can occur, the tensile force of the belt must be limited to a tolerable level. It is limited by the belt reeling device torsion shaft. The torsion shaft operates in much the same way as a spring. Depending on its tensile force, the belt “gives”. Both types of belt tensioner use the same systemBeltBelt reeling device The end of the slot limits the distance which the reeling device can “give”. The torsion shaft is connected to the gearwheel on this side.The reeling device is able to rotate freely within gearwheel inner race.SSP 192/065The torsion shaft is connected to the reeling device on this side.The torsion shaft runs through the belt reeling device.17 Test your knowledge1. Which components belong to the restraint system of the Passat ‘97?2. The side airbag has a capacity ofa) 8 litres, b) 12 litres or c) 15 litres.3. The side airbag crash sensors respond to the application of ................................. force.4. What is the function of the belt force limiter?18 5. The rear belt tensionera) operates according to the Wankel engine principle, b) uses a diaphragm pump, c) is ball-activated.6. Annotate the following drawing.d) a) e) b)f)c)SSP 192/12619 1.8-ltr. 5V Engine ADROn the following page, we will show you the new technical features of the 1.8-ltr. 5V engine, 1.8-ltr. 5V turbo, 2.8-ltr. V6 and TDI engines.Twin path intake manifoldThe 1.8-ltr. 5V engine has a twin path intake manifold. The twin path intake manifold is designed so that it is possible to switch between long and short intake paths. Long intake path A long intake path permite optimum charging of the cylinder, and consequently high torque, in the low speed range. Short intake path Switching over to the short intake manifold permits high power output in the upper speed range.Twin path intake manifoldSSP 192/085Vacuum unit20 Engine control unit J220The engine control unit sends a signal to the intake manifold pressure change valve. It uses the vacuum unit to change over the intake manifold. Power is supplied via the fuel pump relay.IIntake manifold pressure change valve N156Vacuum unit SSP 192/127Electric circuitComponents J17 J220 N156 S Fuel pump relay Motronic control unit Intake manifold pressure change valve Fuse30 15 X 31J1730 15 X 31SN156 64 J220 2IN OUT43SSP 192/106 21 1.8-ltr. 5V Turbo Engine AEBThe 1.8-ltr. 5V turbo engine is equipped with the Motronic M 3.8.2 engine management system.System overviewSensors Lambda probe G39 Air mass meter G70 ActuatorsFuel pump G6 with fuel pump relay J17 Injection valves N30, N31, N32, N33Intake manifold temperature sender G72 Knock sensors G61 + G66Engine control unit J220Output stage N122Ignition coils N, N128, N158, N163 Hall sender G40 Throttle valve control unit J338Engine speed sender G28 Coolant temperature sender G62 Altitude sender F96 Throttle valve control valve J338Activated charcoal filter system solenoid valve N80Charge pressure limitation solenoid valve N75Additional signalsAdditional signalsImmobiliser control unit J362 22Diagnostic connection SSP 192/074 Function diagram 1.8-ltr. 5V turbo engine AEBComponents F96 G6 G28 G39 G40 G61 G62 G66 G70 G72 J17 J220 J338 N N30 N31 N32 N33 N75 N80 N122 N128 N158 N163 S Altitude sender Fuel pump Engine speed sender Lambda probe Hall sender Knock sensor I Coolant temperature sender Knock sensor II Air mass meter Intake manifold temperature sender Fuel pump relay Control unit for Motronic Throttle valve control unitAdditional signals Pin 5 Pin 6 Pin 7 Pin 8 Pin 18 Pin 20 Pin 22 Pin 23 Pin 49 Actual engine torque (out) Speed signal (out) Throttle valve potentiometer signal (out) Air-conditioner compressor signal (in + out) Fuel consumption signal (out) Road speed signal (in) Gear engaged signal for automatic gearbox (in) Auto. gearbox CU retard signal to engine CU (in) Upshift/downshift signal for automatic gearbox (in)Ignition coil Injection valve, cylinder 1 Injection valve, cylinder 2 Injection valve, cylinder 3 Injection valve, cylinder 4 Charge pressure limitation solenoid valve Activated charcoal system solenoid valve Output stage Ignition coil 2 Ignition coil 3 Ignition coil 4 Colour code Fuse Input signal Output signal Positive Negative23 30 15 X 31 J17N SINOUTN80 15 50 50N75 64 50 50N33N32 65 50N31 58N30 80 73 50 4 3 1 50 50 J220 50505050 27 2550 26 12 13 2 68 60 56 63 53 54 6750G6G39G70G61G66G28G62G72J3324 30 15 X 31N128N158N163N122 77 50 50 78 50 70 5 6 7 8 18 20 22 23 49 1950 59 69 7550 115050 74 76 6250 61F96 G40SSP 192/07625 2.8-ltr. V6 Engine ACKVariable valve timingIt provides high torque when driving in low gears at low speeds, thus improving fuel economy and reducing exhaust emissions. High output is needed at high speeds. To achieve both, the cylinder must be well-filled in all speed ranges.Injection valve closes earlyAt low speeds, the piston moves so slowly that the gas mixture in the intake manifold follows the movement of the piston. The inlet valve must be closed early so that the fuel-air mixture is not forced back into the intake manifold.SSP 192/130 Injection valve closes lateAt high speeds, the flow rate inside the intake manifold is so high that the mixture can continue to flow into the cylinder although the piston is moving back up. The inlet valve is closed when the fuel-air mixture can no longer enter the cylinder. In engines with variable valve timing, the closing times of the inlet valve are adapted to the speed range.SSP 192/13126 The principle of variable valve timing:The exhaust camshaft is driven by the crankshaft by means of a toothed belt. The inlet camshaft is driven by the exhaust camshaft by means of a chain.With variable valve timing, the opening times of the inlet valves are adjusted depending on engine speed. The drive chain therefore turns the inlet camshaft.Exhaust camshaftInlet camshaftPerformance position In the “Performance” position, the lower section of the chain is short while the upper one is long. The inlet valve closes late. The rapid air flow within the intake manifold ensures that the cylinder charge is high. The engine is thus able to develop high output at high speeds.SSP 192/081 Variable valve timerTorque position Moving the variable valve timer down shortens the upper chain section and lengthens the lower one. The inlet camshafts therefore rotate in relation to the exhaust camshaft. The exhaust camshaft cannot rotate at the same time, since it is restrained by the toothed belt. The inlet valve closes early. In this position, high torque is produced in the lower and medium speed ranges.SSP 192/08027 2.8-ltr. V6 Engine ACKVariable valve timerA hydraulic cylinder lifts and lowers the variable valve timer. Oil is supplied to the hydraulic cylinder via the engine oil circuit. The engine control unit controls the hydraulic cylinder via the variable valve timing valve, which is bolted directly to the variable valve timer housing.Exhaust camshaftBank1, variable valve timing valve N205Hydraulic cylinder Inlet camshaftVariable valve timer with integrated chain tensionerSSP 192/10828 Variable valve timing in the V6 engineExhaust camshaft Inlet camshaftThe design of the V6 engine makes particularly heavy demands on variable valve timing. Viewed from above, the exhaust camshafts are arranged on the outside and the inlet camshafts on the inside. As a result, the variable valve timers of the left and right bank of cylinders have to operate in opposite directions.SSP 192/129Idling When the engine is idling, the inlet valves are closed late.SSP 192/103Torque position The inlet valves are closed early above an engine speed of 1000 rpm. The camshaft adjuster of the left bank of cylinders moves down while the right cylinder bank variable valve timer moves up.SSP 192/104Performance position At a speed of 3700 rpm, the inlet valves are closed late.SSP 192/10329 2.8-ltr. V6 Engine ACKThe 2.8-ltr. V6 engine is equipped with variable valve timing and is controlled by the Motronic M 3.8.2 engine control unit.System overviewSensors Lambda probes I+II G39 + G108 Air mass meter G70ActuatorsFuel pump G6 with fuel pump relay J17Ignition transformer N152 Injectors N30, N31, N32, N33, N83, N84 Throttle valve control unit J338Sensor for intake manifold temperature G72 Knock sensors G61 + G66Engine control unit J220Engine speed sender G28Intake manifold pressure change solenoid valve N156 Activated charcoal filter system solenoid valve N80Hall sender G40 Hall sender II G163 Coolant temperature sender G62Bank1, variable valve timing N205Throttle valve control unit J338Bank2, variable valve timing N208Additional signalsAdditional signalsImmobiliser control unit J362 30Diagnostic connection SSP 192/073 Function diagram of 2.8-ltr. 6V Engine ACKComponents G6 G28 G39 G40 G61 G62 G66 G70 G72 G108 G163 J17 J220 J338 N N30 N31 N32 N33 N83 N84 N75 valve N80 valve N152 N156 N205 N208 S Fuel pump Engine speed sender Lambda probe Hall sender Knock sensor I Coolant temperature sender Knock sensor II Air mass meter Intake manifold temperature sender Lambda probe II Hall sender II Fuel pump relay Motronic control unit Throttle valve control unit Ignition coil Injection valve, cylinder 1 Injection valve, cylinder 2 Injection valve, cylinder 3 Injection valve, cylinder 4 Injection valve, cylinder 5 Injection valve, cylinder 6 Charge pressure limitation solenoid Activated charcoal system solenoid Ignition transformer Twin path intake manifold valve Camshaft adjustment valve I Camshaft adjustment valve II FuseAdditional signals Pin 5 Pin 6 Pin 7 Pin 8 Pin 18 Pin 20 Pin 22 Pin 23 Pin 45 Pin 49 Actual engine torque (out) Speed signal (out) Throttle valve potentiometer signal (out) Air-conditioner compressor signal (in + out) Fuel consumption signal (out) Road speed signal (in) Gear engaged signal for automatic gearbox (in) Aut. gearbox CU retard signal for engine CU (in) ABS signal (in) Upshift/downshift information for automatic gearbox (in)Colour code Input signal Output signal Positive Earth31 30 15 X 31 J17SSSN80 15 50 50 50N156 64 50N205 55 50N208N84N83 79 50N33 72N32 N31 N30 65 58 50 50 80 73 50 50 4 3 50505050 2550 2650 3950 4050 4450 1150 7650 6850 60G6G39G108G40G163G61G6632 30 15 X 31G70 N152 12 50 0 50 3 56 50 53 50 54 50 67 50 66 59 69 75 62 74 14 2 19 13 70 71 78 5 6 7 8 18 20 22 23 45 498G62G72J338INOUTSSP 192/07533 1.9-ltr. TDI Engine AFNRadiator fan run-onA radiator fan run-on facility controlled by the engine management system is being used in the 1.9-ltr. 81kW TDI engine for the first time. The advantage of this is that the radiator fan run-on time is variable and can consequently be adapted to the previous operating conditions and load conditions of the engine.The run-on time is determined by the engine control unit via a characteristic map. Allowance is also made for the coolant temperature and engine load during the final minutes of car operation before the engine is turned off.Radiator fan run-on relay J397Self-diagnosis Open circuit /short circuit to earth Short circuit to positiveThe radiator fan run-on relay J397 is designated as blower relay J323 in the self-diagnosis.Electric circuit Components J248 J397 Diesel direct injection system control unit Cooling fan run-on relay Series resistor for coolant fan Fuse Coolant fan30 15 X 3130 15 X 31INOUTSN39J397S V7N39 3V7 J24834SSP 192/086 Test your knowledge1. Which of the following diagrams represents the “Performance” position and the “Torque” position in the 2.8-ltr. V6 engine?a)b)2. Complete the following text.At low speeds, the piston moves so that the gas mixture inb)a),follows the movement of the piston. The inlet valve c) so that the fuel-air mixture is not forced back into the intake manifold. At high speeds, the flow rate in the intake manifold is so that the mixturee) d), ,although the piston is moving back up. The inlet valve is notf),until the fuel-air mixture can no longer enter the cylinder.35 GearboxMagnesiumLightweight construction now plays a central role in vehicle development, due to the tough demands on performance, safety and fuel economy. Weighing roughly 34% less than aluminium, magnesium is, as a material, well-suited to meeting these demands. We will show you the advantages and impacts of magnesium using the 5-speed manual gearbox housing 012/01W. Density comparison Iron: 7.873 g/cm3 Aluminium: 2.699 g/cm3 Magnesium: 1.738 g/cm3The strength of a material depends on its density, among other things. Low density goes hand in hand with low strength. This loss of strength has to be compensated for somehow.The housing is therefore ribbed more intensively and the wall thickness has been increased. As a result, the magnesium housing actually weighs 27% less than the aluminium housing. Bolt insertion depth has also been increased.Comparison of insertion depths between magnesium, aluminium and iron36SSP 192/058SSP 192/059SSP 192/060 Electrochemical voltage series In the presence of water, an electric current develops between two different metals. The car battery operates according to a similar principle. The electric current causes one of the two metals to decompose. If a metal decomposes easily, it is termed a non-precious metal. If a metal does not decompose easily, it is termed a precious metal. An electrochemical voltage series is produced by arranging the metals in a series extending from non-precious metal to precious metal. The further the metals in the voltage series are apart from one another, the higher the current and the more readily the less precious metals decompose.Excerpt from electrochemical voltage seriesAluminiumIronLeadCopperGoldH2OAlFePbCuAuMagnesiumSSP 192/09637 GearboxMagnesiumContact corrosion, using a bolted connection as an example In this example, a magnesium component is attached using a bolt made is an iron alloy. If the contact surface is wetted with water, an electric current occurs between the two metals. This leads to contact corrosion. The magnesium is decomposed at the same time.WaterSSP 192/097 CorrosionWaterContact corrosion can be prevented by inhibiting the electric current between the two metals by coating the bolt with an insulating layer. This insulating layer is composed of a special non-conductive coating.SSP 192/061 Special coatingA special coating is applied to all add-on parts which come into direct contact with magnesium. Please follow the instructions given in the Workshop Manual.38 Test your knowledge1. What is the insertion depth for magnesium compared to that for iron?a) 2.0 times greater, b) 5.2 times greater, c) 2.5 times greater.2. Assign the metals of gold, iron, magnesium, copper, aluminium and lead to the following drawing.a)b)c)d)e)f)39 Drive shaftsTriple roller constant velocity jointThe triple roller CV joint reduces the transmission of vibrations and noise from the engine/ gearbox unit to the body. Triple roller joints are principally used in diesel and automatic cars. This is necessary due to the high vibrations which occur in diesel engines and the pretensioning forces which occur in automatic drive trains.CV ball jointTriple roller jointSSP 192/056DesignThe triple roller joint has three spherical journals with a roller fitted to each of them. The rollers are located in races and can slide and swivel on the tripod star.Race SSP 192/071Tripod starRoller HousingDrive shaft 40 Function The principal task of the drive shafts is to transmit power from the gearbox to the wheels. They are also responsible for length compensation.The engine/gearbox unit runs in elastic bearings. At certain speeds, the unit begins to oscillate in its mountings.Triple roller joints SSP 192/041 Race Triple roller joint pin Drive shaftMoving parts Stationary partsThis movement is compensated by the triple roller joints, whereby the tripod star, together with the rollers, slide within their races.SSP 192/042RollerThe triple roller joint housing is pushed over the tripod star rollers by the movement of the engine/ gearbox unit. The drive shaft remains stationary in the process.SSP 192/043 41 drive shaftsIn addition to the vibrations of the engine/gearbox unit, the triple roller joints have to equalise wheel bump and rebound.SSP 192/044The joint housing remains stationary in the process.HousingSSP 192/045The drive shaft is moved away from the gearbox by the rebound action of the wheels. At the same time, the rollers are displaced in only one plane within their races, thereby reducing friction and noise transmission to the body.SSP 192/046 42 Running GearThe following pages describe the design modifications to the axles of the Passat ‘97 as presented to you in Self Study Programme SSP 191.Torsion beam rear axleThe anti-roll bar used in the new torsion beam rear axle is located in front of the axis of rotation. The rear axle mountings are located on the far outer side of the axle. This considerably reduces the forces acting on the rear axle mountings. The mounting housing is made of aluminium and bolted to the trailing arms. When designing the rear axle, comfort was a major consideration. The rear axle mountings and the large rubber bases of the coil springs minimise noise transmission from the axle to the body.Rubber baseTrailing armrAxis of rotationAnti-roll barRear axle mounting SSP 192/100On axles where the rear axle mounting is located on the inside, the mountings have to absorb large forces when cornering.Long lever arm SSP 192/111 Rear axle mountingLocating the rear axle mountings on the outside makes the lever arms shorter, with the result that the mountings only absorb smaller forces. They can therefore be designed with a softer rating.Short lever arm SSP 192/11243 Running GearV section of torsion beam rear axleConventional rear axles have a V section which is open facing forward. In this configuration, the shear centre of the axle is located behind the V section. The centre of rotation is an imaginary axis about which the axle rotates when the suspension experiences a bump on one side. If the shear centre is behind the V section, then diagonally aligned track-correcting mountings have to be used to achieve a self-steering effect.Centre of rotationSSP 192/117SSP 192/116Shear centreThe new torsion beam rear axle has a V section which is open downwards. The shear centre is located above the V section. The axle has different rotational characteristics as a result.SSP 192/114SSP 192/134When cornering, the inside and outside cornering wheels go through rebound and bump respectively, because the car body tilts to the outside. The axle is twisted in itself. The bumped wheel adopts the toe-in position, while the rebound wheel adopts the toe-out position.Toe-outToe-inV section of rear axle is twisted when cornering.SSP 192/11844 Hub/wheel bearing unitThe newly developed wheel bearing generation is used on the rear axle of front-wheel-drive vehicles. The twin-tracked ball bearing has a stationary outer race which is bolted to the rear axle mounting plate. The bearing inner race serves as the carrier for the brake disc and wheel. This design eliminates the need for an axle pivot. The ABS speed sensor is inserted into the wheel bearing and secured with a clip to prevent it from falling out. The advantages of the new wheel bearing generation are as follows: l Minimal wear due to improved sealing. l The rotor is protected by the inserted speed sensor and cannot be damaged by external influences. l The wheel bearing does not have to be adjusted any longer because the bearing preload is predetermined by its design.Speed sensor rotor Outer raceSpeed sensorInner race SSP 192/05745 Running GearDouble wishbone rear axleThe newly developed double wishbone rear axle allows the same through-loading width as the torsion beam rear axle. It has an enclosed subframe to which the transverse links are attached. The subframe is connected to the body by four large bonded rubber mountings.Bonded rubber mountingEnclosed subframeSSP 192/098Single-tube gas-filled shock absorbers are used on the double wishbone rear axle. Their diameter is smaller than that of twin-tube shock absorbers. The low-lying position of the upper wishbone and the smaller shock absorber diameter permit a lower loading platform and a larger through-loading width.Upper wishboneLowerwishbonekSSP 192/09946 Test your knowledge1. How is the high transverse rigidity of the torsion beam rear axle achieved? a) b)2. The V section of the new torsion beam rear axle is open.3. The advantages of the new wheel bearing generation are as follows:a) Minimal wear, b) The ABS speed sensor rotor is protected, c) It is self-adjusting, d) It has to be adjusted using a hexagon nut.4. On the double wishbone rear axle, the upper wishbone is located the wheel. As a result of this, is achieved.47 ABS/EDLThe anti-lock braking system is a 4-channel system. This means that two valves are assigned to each wheel (inlet and outlet valves). The hydraulic unit and the ABS control unit are combined in a single module and can only be renewed as one unit. A Self Study Programme relating to the ABS 5.3 system is in preparation.System overviewSensorsABS/EDL control unit J104ActuatorsABS recirculating pump V39Front left + right speed sensor G45/G47Rear left + right speed sensor G44/46Hydraulic unit with solenoid valves N99-102/ N133-136 N166-168 ABS warning lampBrake light switch FBraking system warning lampAdditional signals, e.g. time signalAdditional signals Diagnostic connection SSP 192/06248 ABS/EDL hydraulic unitConnection for:Diaphragm outlet damperFront left brake caliperFront right brake caliperBrake master cylinder Secondary piston circuit Brake master cylinder Primary piston circuitRear left brake caliperRear right brake caliperHydraulic blockRecirculating pumpSSP 192/063Features of hydraulic unit: One-piece cast iron housing. ABS/EDL solenoid valves each with two hydraulic connections and operating positions. Noise-optimised recirculating pump, Accumulator size for each brake circuit: approx. 3 cm3, Two diaphragm outlet dampers are connected upstream of the EDL hydraulic blocks. They help improve the low-temperature performance of the EDL control system.49 ABS/EDLABS/EDL control unitABS/EDL control unit J104Features of control unit: Redundant computer concept with separate watchdog, Self-diagnosis capability, 26-pin connector contact.SSP 192/064Redundant computer concept In this case, redundant stands for a computer concept with several backups. In the control unit there are two computers which work with the same program independently and check one another. The two computers are, in turn, monitored by a third computer which assumes the task of controlling the solenoid valve relays. This third computer is known as the watchdog. If it detects a fault, it stores the fault message in a read-only memory and can be read out during the self-diagnosis. The fault is indicated by the ABS warning lamp.50 ABS speed sensorSpeed sensor Speed sensor rotor Features of speed sensor: It is inserted into the wheel bearing and is thus protected against external influences. It generates signals contactlessly.-Signal utilisation The signal supplied by the ABS speed sensor is used to control the anti-lock braking system. The navigation system calculates the distance travelled from this signal.SSP 192/057Effect of signal failure Rotor The ABS system is switched off and the ABS warning lamp comes on. The navigation system is de-energised. The brake warning lamp comes on.This is how it works: The rotor is integrated and the speed sensor inserted in the wheel bearing. The speed sensor comprises a permanent magnet with two pole plates. A coil is wound around the pole platesand the permanent magnet. When the wheel moves, the rotor rotates about the speed sensor. In the process, it cuts the field lines of the pole plates, thus inducing a voltage in the coil. This voltage serves as the signal for the ABS control unit and the navigation system.Pole plateSSP 192/132Permanent magnet Coil Pole plate51 ABS/EDLFunction diagramComponents F G44 G45 G46 G47 Brake light switch Rear right speed sensor 4 Front right speed sensor 2 Rear left speed sensor 3 Front left speed sensor 130 15 X 31J104 J105 J106 J220 J285 J401Control unit for ABS with EDL ABS recirculating pump relay Solenoid valve relay Control unit for Motronic Control unit with display unit in dash panel insert Control unit for navigation system with CD-ROM drive ABS warning lamp Front right ABS inlet valve Front right ABS outlet valve Front left ABS inlet valve Front left ABS outlet valve Rear right ABS inlet valve Rear left ABS inlet valve Rear right ABS outlet valve Rear left ABS outlet valve Front right EDL switchover valve Front right EDL outlet valve Front left EDL switchover valve Front left EDL outlet valve Fuse ABS recirculating pumpSS151718 N99 N100 N101K 47 N99 N100 N101 N102 N133 N134 N135 N136 N166 N167 N167 N168 S V39J106V39 16J105 3 1Colour code Input signal Output signal Positive EarthINOUTG4452 30 15 X 31N102N133N134N135N136N166N167N168N169J104549876192324132110141145G46G47J401J220K47J285FSSP 192/08753 Test your knowledge1. How do you distinguish the ABS/EDL hydraulic unit from an ABS hydraulic unit?a) By the diaphragm outlet damper, b) By the colour of the control unit, c) By the threaded holes for the master brake cylinder.2. Where is the rotor for the speed sensor of the torsion beam rear axle located?3. Name the components in this system overview.a)e)b) f)c) g) d) h)k)54 ElectricsGas discharge lampIn the case of gas discharge lamps, light is generated by an electric arc between two electrodes in a pea-sized gas-filled glass tube. The lamp emits light with high green and blue components due to the composition of the gas in the lamp tube. This is the external distinguishing feature of gas discharge technology. The advantages of this new headlight generation over conventional lamp technology are as follows:ElectrodeElectric arcGlass tubewith gas fillingElectrodeSSP 192/121l Up to three times higher luminous efficiency, same power consumption. A 35W gas discharge lamp is sufficient to provide twice the illumination of a 55W lamp. l The useful life of approx. 2500 hours is several times that of the halogen lamp.l The special design of the reflector, aperture and lens provides a much longer range and a wider near-field scatter zone. This illuminates the roadside better, thus reducing driver eye fatigue. l Fog lights are not needed due to the wide near-field beam.55 ElectricsThe gas discharge lamp requires a high-voltage pulse of several thousand volts to ignite the electric arc. The voltage is produced in the ballast. After ignition, an increased electric current is applied to the gas discharge lamp for approx. 3 seconds. As a result, the lamp achieves its maximum brightness with a minimum delay of 0.3 seconds. This slight delay is also the reason why the main headlight is still equipped with a halogen lamp which is connected to the headlight as required. Once the gas discharge lamp has reached its nominal brightness, the ballast regulates the lamp power output tio the lamp.Gas discharge lampSSP 192/122Gas discharge headlightA gas discharge headlight comprises: l headlight housing, l gas discharge lamp ballast J426/J427 and l headlight range control actuator V48/V49.BallastSSP 192/078 Electrical connection Headlight range control actuatorA repair solution is available for the headlight housing. During minor accidents, the securing pin on the headlight housing can shear off. With regard to the gas discharge headlight, this may result in disproportionately high repair costs. Our repair solution, which involves renewing the securing pin and eccentric, allows all headlight housings to be renewed inexpensively.56 Automatic headlight range controlTo prevent dazzling oncoming traffic, the gas discharge headlights have to be equipped with an automatic headlight range control. The control unit for automatic headlight range control determines the car’s load condition by two sensors located on the front and rear axles on the left of the car. It continuously adjusts the headlight via the actuator to ensure that the road is always illuminated optimally. Manual adjustment is no longer provided.Headlight position under normal load Headlight range control actuatorControl unit for headlight range controlSSP 192/051 Sensor Headlight position under heavy load SensorSSP 192/05257 ElectricsEmergency operation: If an electrical fault occurs in the automatic headlight range control, the headlight range control actuator automatically sets the headlight to its lowest position. The driver is alerted to the malfunction.Self-diagnosis: The self-diagnosis is started using address word ”55”.Headlight position in emergency operationSSP 192/102The high voltage applied to the gas discharge lamps can endanger life. When carrying out repairs, the headlight must always be disconnected from the power supply.58 Test your knowledge1. In the case of gas discharge lamps, light is produced by between two in a gas-filled glass tube.2. The luminous efficiency with the same power consumption is:a) approx. ten times higher, b) approx. five times higher, c) approx. three times higher.3. A gas discharge headlight comprises:4. The voltage applied to the gas discharge lamp is:a) very low and therefore absolutely safe, b) dangerous when performing work with wet or moist fingers, c) a high voltage and can endanger life if handled improperly.59 Air-conditioningThe Passat has an improved air-conditioning system. You can find out about its features and innovations on the following pages.Refrigerant circuitThe refrigerant in the evaporator absorbs heat and dissipates it into the ambient air to cool the passenger compartment. The refrigerant is circulated in a closed circuit. The refrigerant circuit contains the refrigerant R134a.Compressor The compressor draws in the gaseous refrigerant and compresses it. Its pressure and temperature increase in the process. The hot gas is pumped onward to the condenser. Hot air HeatEvaporator The evaporator plates cool the passing fresh air or the recirculated air from the passenger compartment. The refrigerant absorbs the heat.Condenser The passing outside air cools the hot gaseous refrigerant in the condenser. The refrigerant is liquefied in the process. Cold air Low pressure Outside air High pressureSSP 192/029 Restrictor The compressed refrigerant is expanded and atomised in the restrictor. It cools down rapidly in the process.60 CLIMAtronicThe operating and display unit is combined with the CLIMAtronic control unit as a single module.The dash panel insert temperature sensor and the temperature sensor fan are integrated in the control unit.Temperature sensor fan V42Dash panel insert temperature sensor G56SSP 192/031SSP 192/039 Temperature sensor for left-hand drive carsSSP 192/040 Temperature sensor for right-hand drive carsThe installation location of the temperature sensor in the CLIMAtronic control unit is different in left- and right-hand drive cars. In left-hand drive vehicles, the temperature sensor is located behind the cover grille on the left.For right-hand drive cars, the temperature sensor is installed on the right. Using this layout, drinks in the can holder have less effect on the temperature sensor.61 Air-conditioningSystem overviewSensorsSunshine penetration photosensor G107CLIM Atro nicDash panel insert temperature sensor G56 with temperature sensor fan V42CLIMAtronicAUTOECONOutside temperature sensor G17Temperature sensor for fresh air intake duct G89Sender for footwell air outlet temperature G192 Sender for central air outlet temperature G191Air-conditioning pressure switch F129Additional signals62 Actuators Control unit for CLIMAtronic J255 Footwell/defrost flap actuator V85 with potentiometerAUT OECO NCentral flap actuator V70 with potentiometerTemperature flap actuator V68 with potentiometerVentilation flap actuator V71 with potentiometerFresh air blower V2 with blower control unit J126Magnetic coupling N25Additional signals Diagnostic connectionSSP 192/030 63 Air-conditioningVentilation flap and the fresh/air recirculation flapThe ventilation flap and the fresh/air recirculation flap are activated by a common motor. The flaps are adjusted separately by a drive disc with two guide paths. The vacuum unit and two-way valve previously used are no longer required.SSP 192/036Fresh airSSP 192/024Fresh air mode In the fresh air mode, the ventilation flap and the fresh/air recirculation flap are fully open at speeds of below 20 kph. Fresh air is able to flow into the car unobstructed.SSP 192/028Recirculated airVentilation mode At high speeds, the ventilation flap prevents too much fresh air from entering the passenger compartment. Opening and closing are dependent on road speed. The position of the ventilation flap is also affected by the difference between the nominal and actual temperature in the passenger compartment. If the temperature difference is very large, the port cross-section stays open at increasing speed so that the desired temperature is achieved more quickly.Fresh airSSP 192/023SSP 192/027Colour code Ventilation flapRecirculated air 64Fresh/air recirculation flap Drive disc Fresh airSSP 192/022Above a speed of 160 kph, the ventilation flap is closed. A small amount of fresh air trickles into the passenger compartment through a narrow opening in the ventilation flap.SSP 192/026Recirculated airFresh airAir recirculation mode In the air recirculation mode, the two flaps are in their upper positions. The fresh air supply is blocked. Air-conditioning only takes in air from the passenger compartment.SSP 192/021SSP 192/025Recirculated airAn air-conditioner without a ventilation flap is installed in right-hand drive vehicles.65 Air-conditioningCentral flapThe central flap controls the air flow to the central, side, footwell and DEFROST air outlets. Its new shape allows it to be fully closed. It is also driven by an electric motor.SSP 192/035 To footwell and DEFROST air outletsCentral flapAt low outside temperatures and when the engine is cold, the central flap is fully closed. This prevents ice-cold air from being blown into the passenger compartment.SSP 192/002As coolant temperature increases, the flap opens and air reaches the side air outlets. The air duct leading to the central air outlets is To side air outstill closed.letsSSP 192/003If the central flap is fully opened, air is evenly distributed to the central and side air outlets.To central air outletsThe vacuum unit and the shutoff flap for the central air outlets are not required.SSP 192/004 66 Fresh air blower V2The blower control unit is integrated in the fresh air blower. The control unit cooling ribs are cooled by the blower airstream.SSP 192/037Fresh air blower V2SSP 192/038 Air-conditioner Blower control unit J12667 Air-conditioningSunshine penetration photosensor G107SSP 192/093The air-conditioning temperature control is affected by the sunshine penetration photosensor. It measures the sunlight falling directly on the car’s occupants.How it works: The sunlight impinges on a photodiode through a filter and an optical element. The filter has the same effect as sunglasses and prevents sublight from damaging the photodiode. The photodiode is a light-sensitive semiconductor element. When it is not illuminated, only a small electric current can flow through the diode. When it is illuminated, the electric current increases. The stronger the light, the higher the current. To the control unit, an increase in electric current indicates higher sunshine penetration. It regulates the interior temperature accordingly.Housing coverFilterOptical elementPhotodiodeHousingSSP 192/03468 Diagonal sunlight penetrationParticularly sunlight incident on the car’s occupants diagonally from the front, i.e. directly, increases the feeling of warmth.Filter Optical element Photodiode SSP 192/092The optical element deflects a large proportion of diagonally penetrating sunlight onto the photodiode. Cooling is increased to equalise the effect of heat radiation on the body.Vertical sunlight penetrationThe optical element provides greater protection from vertical sunlight penetration.Vertically incident sunlight is screened by the car’s roof. The optical element deflects less light onto the photodiode. Cooling can be reduced as the car’s occupants are not directly exposed to heat radiation.SSP 192/105Electric circuitJ225 Control unit for CLIMAtronic G107 Sunshine penetration photosensor Pin 12 Signal earth Pin 18 SignalJ255 18 12Effects of signal failure No replacement function.Self-diagnosis fault message Open circuit/short circuit to positive. Short circuit to earth.G107SSP 192/133 69 Air-conditioningThe temperature of the air streaming into the vehicle is now measured by two separate temperature sensors.Footwell outlet temperature sender G192The temperature is measured by a temperaturedependent resistor. As temperature decreases, the electrical resistance increases.NTC resistorSSP 192/032Central outlet temperature sender G191With this sender, the temperature-dependent resistor is glued and soldered to the surface of a printed circuit board. By designing the sender in this way, the temperature is not determined at a measuring point, but along a measuring section. The central air outlet temperature is measured in this way.PCBSSP 192/033 NTC resistorSignal utilisation The control unit calculates a value from the signals provided by the two sensors.Effects of signal failure In the event of signal failure, the control unit calculates a substitute value on the basis of the outside temperature.Self-diagnosis fault message Open circuit/short circuit to positive. Short circuit to earth.70 Test your knowledge1. Which statements are true?a) The ventilation flap and the fresh/air recirculation flap are activated by a common electric motor drive. b) In the air recirculation mode, the ventilation flap is in its upper limit position and the fresh/air recirculation flap is in its lower limit position. c) The central flap controls the air flow to the central, side, footwell and DEFROST air outlets. d) The new shape of the central flap makes it possible to fully close the central and side air outlets.2. What is the task of sunshine penetration photosensor G107 and how does it work?3. Name the components.c) a) b)71 Solutions:Page 18/19 Re. 1. Driver airbag, Front passenger airbag, Side airbags, Front + rear belt tensioners, Belt force limiter Re. 2. b) Re. 3. side Re. 4. Its purpose is to reduce the tensile force of the belt to an acceptable level so that persons wearing a seatbelt are not injured by the belt during an accident. Re. 5. a) Re. 6. a) Tripping device, b) Ball retainer, c) Gear, d) Belt , e) Propellant charge, f) Feed tube containing balls Page 35 Re. 1. a) Torque position, b) Performance position Re. 2. a) slowly, b) intake manifold , c) be closed early, d) high, e) can continue to control the cylinder, f) closed late Page 39 Re. 1. c) Re. 2. a) Aluminium, b) Iron, c) Lead, d) Copper, e) Gold, f) Magnesium Page 47 Re. 1. a) The rear axle mountings are attached on the far outer side. b) The anti-roll bar is in front of the axis of rotation. Re. 2. downward Re. 3. a), b), c) Re. 4. a) within, b) a low load floor and large through-loading width Page 54 Re. 1. a) Re. 2. Er is inserted into the wheel bearing and secured by a clip. Re. 3. a) ABS/EDL control unit, b) Front speed sensor, c) Rear speed sensor, d) Brake light switch e) ABS recirculating pump, f) Hydraulic unit with solenoid valves, g) ABS warning lamp, h) Brake warning light system, k) Diagnostic connection Page 59 Re. 1. a) Electric arc, b) Electrodes Re. 2. c) Re. 3. Headlight housing, Ballast, Headlight range control actuator Re. 4. c) Page 71 Re. 1. a), c), d) Re. 2. The photosensor controls the air-conditioning temperature control when sunlight impinges directly incident on the car’s occupants. A filter and an optical element deflect the sunlight onto a photodiode. The photodiode is a light-sensitive semiconductor element. The stronger the sunlight directly incident, the higher the current which can flow through the diode. Re. 3. a) Filter, b) Photodiode, c) Optical element72 Notes73 Notes74 Notes75