TECHNICAL DOCUMENTATION
SSP 342 Radio Systems 2006

This PDF is currently unavailable.
Read document text
Service TrainingSelf-study Programme 342Radio Systems 2006Design and FunctionRadio broadcasts are not just for entertainment. They are an important source of information in vehicles, in particular, that provide traffic news in addition to music and general information. New products are constantly required in the area of radio receivers in order to meet current and future requirements.This self-study programme was compiled with the valuable help of Blaupunkt GmbH in Hildesheim. It should help you understand the audio technology used in Volkswagen vehicles as a supplement to self-study programme 147.S342_055NEWImportant NoteThe self-study programme shows the design and function of new developments. The contents will not be updated.For current testing, adjustment and repair instructions, refer to the relevant service literature.2ContentsBasics Radio reception in FM range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Aerial properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Audio CD (Audio Compact Disc). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Handling and care information for CDs and CD-ROMs . . . . . . . . . . . . . . . .14 Moving Picture Experts Group (MPEG) MP3 . . . . . . . . . . . . . . . . . . . . . . . . .15 Digital Audio Broadcasting (DAB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Radio Systems R 100 radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 RCD 200 radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 RCD 300 radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 RCD 500 radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Sound Systems 8-channel analogue amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 10-channel digital amplifier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 12-channel digital amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 10-channel DYNAUDIO high-end system . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Digital Signal Processing (DSP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Loudspeaker locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Aerial systems Aerial systems for the Golf/Golf Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Aerial systems for the Passat 2006 and Jetta 2006 . . . . . . . . . . . . . . . . . . . .51 Aerial connection systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56Test Yourself . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 583BasicsRadio reception in FM rangeFM waves travel in straight lines. They are not reflected by the layers of the earth’s atmosphere and therefore do not follow the curve of the earth.You obtain the best reception when the broadcasting aerial can “see” the car aerial. The FM signals, which are transmitted by the transmitter with horizontal or vertical polarisation (depending on country), can be received best with an aerial that is mounted in a position that can be reached from all sides (the signals “see” the full length of the aerial). Disadvantage: The range is lower than AM signals (MW, LW).S342_001If you leave the range of the transmitter tower (the sound quality will become poor and there is sound interference), a new transmitter or a different frequency needs to be selected. On car radios with RDS (Radio Data System), an alternative frequency is searched for automatically.S342_004FM waves cannot pass through hills, buildings and similar obstacles without being impaired. If the vehicle enters such an area, only poor or no reception is possible. This occurs in particular when you drive through mountains or between high-rise buildings. The range depends on the transmission power and the distance of the transmitter aerial from the ground. Transmitter aerials are therefore normally placed on towers, tall buildings or mountains.S342_0024FM waves are reflected by building, hills etc. Reception from several directions results (multipath).Deflected indirect signalsThis can cause the direct signal to be deflected even in covered areas like, for example, built-up areas or mountains. This reflection could cause reception to be poor quality (reflection surface). In some cases, the radio tuner picks up both the direct and also a reflected signal from the transmitter. This overlapping of the direct and reflected (delayed) signals can cause reception interference in the form of audible sound distortion in the speaker. Furthermore the time difference between the direct and indirect signal causes the reception quality to vary depending on the vehicle position.S342_003The fluctuations of the reception level occur with VHF reception with relatively small changes of location. The vehicle shown in the diagram is equipped with two aerials at a distance of approx. 1 m from each other. In the diagram, you can see that the front aerial has a very high receiving level and the rear one a very low one even though the distance between the two aerials is relatively small compared with the transmitter distance.LevelPath in mS342_0055BasicsAerial propertiesReception properties of a standard FM aerialThe blue area indicates the direction-related reception sensitivity of the aerial. Here you can clearly see that the aerial is sensitive to signals from all directions. Direct and reflected signals are thus received with the same strength. This aerial configuration contributes to interference from multipath reception.Overhead view of aerial Reflected FM signal Direct FM signalS342_006Technical suppression of multipath interferenceAs multipath interference is unpleasant particularly in the higher audible frequency range, a technical solution to reduce interference is needed. One possibility for reduction is the “highcut method”. However the disadvantage of this is that “cutting” the high frequencies has a negative effect on the sound in this range.FrequencyInterference-free audio signalTime S342_007 Receiving levelThe audio amplifier in the car radio amplifies all frequencies that can be heard by the human ear to a level appropriate to the human sensory range.Frequency S342_0086HighcutFrequency Disturbing pulsesInterference from signalchanging disturbing pulsesTime Disturbing pulse after highcutDisturbing pulse in signalS342_009If interference occurs in the upper frequency range due to multipath reception, it will be suppressed by the highcut function in the FM tuner of the car radio.Receiving levelFrequencyS342_010 Highcut cuts off high frequencies if interference occurs.7BasicsPhase diversityOne better method of reducing interference is the phase diversity aerial principle. The phase diversity is also more technically complex than, for example, highcut as 2 tuners and 2 aerials are needed. Phase diversity works with two different reception modes, the “interference-free signal” reception mode and the “interference signal” reception mode. This reception type basically works in the same way as a directional aerial. During operation, these aerials are continuously “turned” virtually in the direction of the signal source.S342_011Turning the aerial is, of course, only simulated by the digital signal processing. The aerial is not actually rotated. However, the effect is exactly the same. The aim is to provide the direct signal with as much aerial surface as possible and the reflected signal with as little as possible.8Receiving property of diversity aerial system with two FM aerialsThe blue area indicates the direction-dependent reception sensitivity of the aerial system and the evaluation electronics. You can clearly see here that the system for the direct signal is particularly sensitive while it is more insensitive to the reflected signal. Multipath interference is suppressed here to a great extent. Less highcut is therefore also used, which leads to a considerable sound improvement. Furthermore the system is more sensitive in the direction of the direct signal. As a result, the reception is improved considerably and thus more stereo reception and less silent pauses are noticed.Directional aerial Reflected signal Direct signalS342_012Signal strengthThe signal strength of a conventional single-tuner receiver is considerably lower compared with a twotuner phase diversity receiver depending on the distance of the radio transmitter.Radio transmitterDual-tuner phase diversitySingle-tuner receiverDistance from radio transmitter S342_0139Basics“Interference-free signal” reception modeIn “interference-free” reception mode, the electronics in the radio constantly check which aerial receives the strongest signal and select the stronger one for the input signal. The demodulator converts the HF aerial signals into inaudible signals and forwards them to the radio data system. The second tuner constantly searches the whole frequency band for better reception frequencies for the selected station. If a better signal is found, this tuner switches to reception and the other switches to scanning mode in the background. This avoids the RDS-AF test pauses as experienced with single-tuner systems.This is called the background mode (collect data).Reception aerial ITuner IDemodulator IRadio Data System IS342_029 Reception aerial II Tuner II Signal converter Demodulator II Radio Data System II10“Interference signal” reception modeIn “interference signal” reception mode, the signals from both aerials are digitised in an intermediate frequency analogue/digital converter and processed using an adaptive algorithm. This process removes the interference signals by forming a new, directed aerial signal. The aerial power is also improved by up to 3 dB. The second demodulator and the second radio data system remain unused in the background in this mode as both aerials are required to receive the selected station.This mode is called phase diversity.Reception aerial ITuner IDemodulator IRadio Data System IS342_030 Reception aerial II Tuner II Signal converter Demodulator II Radio Data System II11BasicsAudio CD (Audio Compact Disk)Audio CDs, which started to become established among home users in 1982, are increasingly being used in cars and are becoming more popular than compact cassettes. Audio CDs are optical mass storage media for the digital storage of music.Analogue signalDigital signalTimeAnalogue/digital converterS342_014The analogue music signal is converted to a digital signal by an analogue/digital converter. The aim of digitalisation is to emulate the analogue signal digitally and without interference in as smaller steps as possible. The higher the resolution (e.g. 8 - 16 - 32 - 64 bit) of the A/D converter, the more authentic the sound result (emulation of the analogue signal).Digital/analogue converterS342_056To obtain a suitable signal from the digital signals for playback via the speakers, an analogue signal needs to be formed again in the CD player using a D/A converter.12The CD mainly consists of a transparent carrier material (substrate), which is moulded by means of compression injection. The top side of this carrier contains the digital information in the form of microscopic pits and lands that are arranged in a single long, spiral track (around 5 km in total).This surface containing information is covered with a thin aluminium film and sprayed with an acrylic layer. A label can then be applied or printed on. The information is scanned with a laser through the carrier layer without contact and thus free of wear.Laser diodeSemi-transparent mirrorPhoto diodeLand Pit Substrate S342_01513BasicsHandling and care information for CDs and CD-ROMsOnly touch CDs by the sides.S342_060Avoid getting finger prints on the CD.S342_061If a CD becomes dirty, never wipe the CD with circular motions. Instead wipe with a soft lint-free cloth from the inside to the outside.S342_062Also handle CDs carefully both from the underside and from the top. Do not write on the CD and do not affix labels.S342_063All CDs should be handled carefully and always be stored in a protective case. Also keep CDs away from heat and direct sunlight.S342_06414Moving Picture Experts Group (MPEG) MP3MP3 is a file format for audio compression. Like other formats, MP3 is based on the fact that human perception is limited. The number of sounds that people perceive is reduced, for example, due to their frequency or volume. As this process involves losses, the original output signal cannot be reproduced completely. The losses depend greatly on the data rate. At around 128 kBit/s, the differences from the original are hardly noticeable if music with a low dynamic scope is involved (pop music, synthesizer, techno). For example, with guitar and violin music, you will soon notice annoying differences to the original at 128 kBit/s, average data rates of 192 kBit/s or higher are recommended for this style of music.S342_037Non-audible frequencies — the range perceivable by adults is from 20 Hz to 18 kHz — are cut off in the data.FrequencyTime S342_05815BasicsDigital Audio Broadcasting (DAB)The Digital Audio Broadcasting system (DAB) differs considerably from previous analogue data transfer systems. In DAB, the receiver does not only receive an audio signal (music, language), but also additional data signals (services) with information on travel, schedule, music, weather, etc. If the radio is equipped with a suitable display, graphics, for example, maps or animations, can also be displayed. The DAB frequency range (47 MHz to 1468 MHz) is divided up into several channels each with a bandwidth of 1.536 MHz. The basic signals for audio and service data are digitised in the transmitter, compressed (MPEG), encoded separately and chopped up into time sections. Then all basic signals are combined in a frequency mixer and sent to the respective channel in digital form. That is the content of a station in the simplest form (e.g. NDR 2). That means● ● ● ● ●Separation into programmes Separation according to audio tracks and service Reassemble signal in order Decode signal D/A conversionRegions with DAB in GermanyS342_03116Due to the data reduction, it is generally the case that several stations find space in the bandwidth of a channel with their respective audio tracks and services. All of these programs combined in a channel are called an ensemble (e.g. North I). In the receiver, the DAB radio, the signals are processed in reverse order. The DAB transmission accesses the conventional terrestrial transmission systems. Due to the low susceptibility to interference of digital signals, the transmitter can work with a radiated power of approx. 1 kW. A typical VHF transmitter has a transmission power of 10 to 100 kW.DAB ensemble North INDR 2FFNNDR 3NDR 2 audioNDR TMCNDR dataFFN audioFFN dataNDR 3 audio S342_05717Radio SystemsR 100 radioThe R 100 radio is available for the Volkswagen Golf 2004, Touran and in other models for bulk customers, e.g. fleet operators. This radio unit has the following functions: - Single-tuner - Two output stage with 20 Watt output, 2 speaker channels can be connected - RDS FM/AM Europa radio (VHF/MW) - Control for an external 6-CD changer - Mute mode for telephone hands-free system - Speed-dependant volume control (GALA) - Self-diagnosis incl. loudspeaker diagnosis - Transport mode (reduction of the current requirement during transport and rest times)CD button Select CD changer mode DisplayStation buttons 1-3 Pressing the station buttons calls up the stored stations. You can store stations manually (once a station has been tuned, hold down the station button until you hear a signal) or automatically (hold down the AS button until STORE appears in the display).On/off switch Pressing the tuning knob switches the radio on and off. The last station tuned and last volume level set will be selected.TP button When the TP option is switched on, only stations that broadcast regular traffic reports will be offered (traffic program stations) during automatic station searches. If a traffic program station is tuned, an incoming traffic report will be played in the current radio mode.18Please follow the respective operating manual when using the radio.BAL button Press this button to open the menu for setting the balance. Turn the tuner knob to change the volume balance on the left and right.Sound settings Pressing this button opens the menu for adjusting the bass (display: BASS). Press it again to open the menu for adjusting the treble (display: TREB). Turn the tuner knob to the desired tone level.Station search buttonsStation buttons 4-6AS button (auto store) If you press the AS button, the six stations with the greatest field strength are stored automatically and spread across the station buttons according to their field strength.S342_016 FM button Press to select the VHF (frequency modulation) frequency range. AM button Press to select the MW (amplitude modulation) frequency range.Tuning knob - For manual station tuning - For sound settings (BASS, TREBLE), BALANCE and GALA - For the SCAN function19Radio SystemsFunctional diagram for R 100 radio in Volkswagen Golf/TouranLegendA R R11 R20 R21 R22 R23 R41 R108 SBattery Radio Aerial Front left treble loudspeaker Front left bass loudspeaker Front right treble loudspeaker Front right bass loudspeaker CD changer Left aerial module FuseInput signal Output signal Voltage supply (plus) Earth (minus) CAN data bus line20CAN data busS342_02221Radio SystemsRCD 200 radio- Single-tuner - Four output stages with 20 Watt output, 2 or 4 speaker channels can be connected - RDS FM/AM Europa radio (VHF/MW) - Integrated single CD drive - Control for an external 6-CD changer - Convenience code - Mute mode for telephone hands-free system - Speed-dependant volume control (GALA) - Self-diagnosis incl. loudspeaker diagnosis - Transport mode (reduction of the current requirement during transport and rest times)Balance/fader button Pressing the B/F button opens the menu for setting the balance (display: BAL). Press it again to open the menu for adjusting the volume distribution between the front and rear (fader, display: FAD). Turn the tuner knob to the desired setting.Station buttons 1-3 Pressing the station buttons calls up the stored stations. You can store stations manually (once a station has been tuned, hold down the station button until you hear a signal) or automatically (hold down the AS button until STORE appears in the display).AS button (auto store) If you press the AS button, the six stations with the greatest field strength are stored automatically and spread across the station buttons according to their field strength.On/off switch Pressing the tuning knob switches the radio on and off. The last station tuned and last volume level set will be selected.FM button Press to select the VHF (frequency modulation) frequency range.The output stages for the rear speakers are only active if speakers are actually connected. The fader functions will only become active when they are connected.22TRE tone button Pressing the TRE button opens the menu for setting the treble (display: TRE). Turn the tuner knob to the desired tone level.BAS tone button Pressing the BAS button opens the menu for setting the bass (display: BASS). Turn the tuner knob to the desired tone level.Mix button The tracks on the current CD will be played in a random order.Station buttons 4-6Tuning knob - For manual station tuning - For sound settings (BASS, TREBLE), BALANCE and GALA - For the SCAN function - For track selection in CD modeS342_017 AM button Press to select the MW (amplitude modulation) frequency range. CD button Press this button to switch to CD mode or CD changer mode.TP button When the TP option is switched on, only the stations that broadcast regular traffic reports will be offered (traffic program stations) during automatic station searches. If a traffic program station is tuned, an incoming traffic report will be played in the current radio mode.23Radio SystemsFunctional diagram for RCD 200 radio in Volkswagen Fox/Polo 2006LegendA R R11 R15R17R21 R23 R24 R41 SBattery Radio Aerial Rear left bass loudspeaker (Polo: treble and bass loudspeakers) (Fox: wide band loudspeaker) Rear right bass loudspeaker (Polo: treble and bass loudspeakers) (Fox: wide band loudspeaker) Front left bass loudspeaker (treble and bass loudspeaker) Front right bass loudspeaker (treble and bass loudspeakers) Aerial amplifier CD changer FuseCAN data busInput signal Output signal Voltage supply (plus) Earth (minus) CAN data bus line24S342_02325Radio SystemsRCD 300 radioThe RCD 300 radio is available as the standard radio system for private customers. It has the following functions: - FM dual-tuner diversity - Four output stages with 20 Watt output, 2 or 4 speaker channels can be connected - RDS FM/AM Europa radio (VHF/MW) - Stored stations with RDS name shown in display - Control via multifunction steering wheel (MFW) and multifunction display (MFD) - Integrated single CD drive - Control for an external 6-CD changer - Convenience code - Mute mode for telephone hands-free system - Speed-dependant volume control (GALA) - Self-diagnosis incl. loudspeaker diagnosis - Transport mode - Driving school version (optional)Mix button The tracks on the current CD will be played in a random order.Multifunction buttons The functions of the multifunction buttons depend on the respective operating mode. The current assignment of the multifunction buttons is shown in the display.CD button Press this button to switch to CD or CD changer mode. TP button When the TP option is switched on, only the stations that broadcast regular traffic reports will be offered (traffic program stations) during automatic station searches. If a traffic program station is tuned, an incoming traffic report will be played in the current radio mode.On/off switch Pressing the tuning knob switches the radio on and off. The last station tuned and last volume level set will be selected.26Station search buttons Radio: Press briefly to search for stations automatically. CD mode: Press briefly to select the tracks on the current CD; hold down to listen to a CD track in rewind/fast forward mode. Menu functions: Pressing switches the menu functions on and off.Menu button for sound settings and setup SOUND: The menus for setting the tone (TREBLE, BASS) and volume distribution (BALANCE, FADER) are called up with the multifunction buttons. You make the settings with the tuning knob. SETUP: The SETUP menu is called up from the SOUND menu. The GALA, ON-VOL and RDS-REG settings are made with the tuning knob and the search buttons.Multifunction buttonsTuning knob - For manual station tuning - For the SCAN function - For track selection in CD modeS342_018 FM button Press to select the VHF (frequency modulation) frequency range. AM button Press to select the MW (amplitude modulation) frequency range. AS button (auto store) If you press the AS button, the six stations with the greatest field strength are tuned automatically and stored in the second memory level (AM 2/FM 2) according to their field strength.27Radio SystemsFunctional diagram for radio RCD 300 in Volkswagen TouranLegendA R R11 R14 R15 R16 R17 R20 R21 R22 R23 R41 R93 R108 R109 SBattery Radio Aerial (AM/FM) Rear left treble loudspeaker Rear left bass loudspeaker Rear right treble loudspeaker Rear right bass loudspeaker Front left treble loudspeaker Front left bass loudspeaker Front right treble loudspeaker Front right bass loudspeaker CD changer Radio aerial 2 (FM) Left aerial module Right aerial module FuseCAN data busInput signal Output signal Voltage supply (plus) Earth (minus) CAN data bus line28S342_02429Radio SystemsRCD 500 radioThe top of the range radio is the RCD 500 with the following functions: - FM dual-tuner diversity - Four output stages with 20 Watt output, 4 speaker channels connected - RDS FM/AM Europa radio (VHF/MW) - Stored stations with RDS name shown in display - Control via MFW and MFD - Integrated 6-CD changer - Control for an external 6-CD changer - Mute mode for telephone hands-free system - Speed-dependant volume control (GALA) - Traffic Information Message (TIM) - Convenience code - Self-diagnosis incl. loudspeaker diagnosis - Transport mode - Optional external sound amplifier can be connected (output stage reduction by 14 dB)Mix button (random playback) The tracks on the current CD will be played in a random order.Multifunction buttonsTraffic Information Messages (TIM) The TIM button allows you playback recorded traffic reports. After entering up to two different TIM times in the SETUP menu, you will be able to record traffic reports at a specific time even when the radio is turned off.On/off switch Pressing the tuning knob switches the radio on and off. The last station tuned and last volume level set will be selected.TP button When the TP option is switched on, only the stations that broadcast regular traffic reports will be offered (traffic program stations) during automatic station searches. If a traffic program station is tuned, an incoming traffic report will be played in the current radio mode.30Station search buttons Radio: Press briefly to search for stations automatically. CD mode: Press briefly to select the tracks on the current CD; hold down to listen to a CD track in rewind/fast forward mode. Menu functions: Pressing switches the menu functions on and off.Menu button for sound settings and setup SOUND: The menus for setting the tone (TREBLE, BASS) and volume distribution (BALANCE, FADER) are called up with the multifunction buttons. You make the settings with the tuning knob. SETUP: The SETUP menu is called up from the SOUND menu. The GALA, ON-VOL and RDS-REG settings are made with the tuning knob and the search buttons.Multifunction buttons The functions of the multifunction buttons depend on the respective operating mode. The current assignment of the multifunction buttons is shown in the display.Tuning knob - For manual station tuning - For the SCAN function - For track selection in CD modeS342_019 FM button Press to select the VHF (frequency modulation) frequency range. AM button Press to select the MW (amplitude modulation) frequency range.AS button (auto store) If you press the AS button, the six stations with the greatest field strength are tuned automatically and stored in the second memory level (AM 2/FM 2) according to their field strength.31Radio SystemsFunctional diagram for radio RCD 500 in Volkswagen GolfLegendA J519 R R11 R14 R15 R16 R17 R20 R21 R22 R23 R41 R93 R108 R109 R177 R178 R179 S Z1Battery Onboard supply control unit Radio Aerial Rear left treble loudspeaker Rear left bass loudspeaker Rear right treble loudspeaker Rear right bass loudspeaker Front left treble loudspeaker Front left bass loudspeaker Front right treble loudspeaker Front right bass loudspeaker CD changer Radio aerial 2 Left aerial module Right aerial module Amplitude modulation frequency filter (AM) Frequency modulation frequency filter (FM) in the negative wire Frequency modulation frequency filter (FM) in the positive wire Fuse Heated rear windowCAN data busInput signal Output signal Voltage supply (plus) Earth (minus) CAN data bus line32S342_02533Sound Systems8-channel analogue amplifierThe use of external multi-channel amplifier improves the sound quality inside the car in several ways:● ● ● ● ●Improved sound dynamics Car-specific sound configuration Greater frequency ranges Better sound distribution Authentic sound (concert hall quality)CAN data busAn amplifier system is made up of the amplifier along with the treble, mid-range and bass loudspeakers. The external amplifier generates the signal with the corresponding frequency response for the individual speaker outputs and uses 8-channel analogue technology. It has eight internal output stages that control ten speakers via ten outputs. The outputs for the rear bass and treble speakers are combined via an internal frequency filter. The signal inputs on the amplifier are controlled via the speaker outputs on the radio unit or radionavigation unit. The radio/RNS unit needs to be coded to “Sound” so that the level of the output channels is reduced by 14 dB. Self-diagnosis is carried out via the CAN data bus. The 8-channel analogue sound system is available for the Passat 2006, Golf 2004, Jetta 2006 and Touran.LegendA R R12 R14 R15 R16 R17Battery Radio Amplifier Rear left treble loudspeaker Rear left bass loudspeaker Rear right treble loudspeaker Rear right bass loudspeaker34S342_026R20 R21 R22 R23 R103 R104 SFront left treble loudspeaker Front left bass loudspeaker Front right treble loudspeaker Front right bass loudspeaker Front left mid-range loudspeaker Front right mid-range loudspeaker FuseInput signal Output signal Voltage supply (plus) Earth (minus) CAN data bus line35Sound Systems10-channel digital amplifierThe 10-channel digital amplifier uses digital signal processing and supplies the connected speakers with an output power of 600 Watts. A special switched-mode power supply in the amplifier ensures that even the top pulse overshoots are not cut off and therefore no signals for the audible frequencies are filtered. The signal inputs on the amplifier are controlled via the speaker outputs on the radio unit or radionavigation unit and digitally via the CAN data bus. Self-diagnosis is carried out via the CAN data bus. The 10-channel digital amplifier is available for the Passat 2006 with DYNAUDIO loudspeakers. Amplifier output power: Bass loudspeaker: 4 x 120 Watt Mid-range loudspeaker:2 x 30 Watt Treble loudspeaker: 4 x 15 WattCAN data busLegendA R R12 R14 R15 R16 R17Battery Radio Amplifier Rear left treble loudspeaker Rear left bass loudspeaker Rear right treble loudspeaker Rear right bass loudspeaker36S342_053R20 R21 R22 R23 R103 R104 SFront left treble loudspeaker Front left bass loudspeaker Front right treble loudspeaker Front right bass loudspeaker Front left mid-range loudspeaker Front right mid-range loudspeaker FuseInput signal Output signal Voltage supply (plus) Earth (minus) CAN data bus line37Sound Systems12-channel digital amplifierThe 12-channel digital amplifier is used in the Volkswagen Touareg and Volkswagen Phaeton. It has a total of 12 outputs, to which four bass, four mid-range, one mid-range and treble and two treble loudspeakers are connected in the Touareg and four bass, four mid-range, two mid-range and treble and two treble loudspeakers are connected in the Phaeton. One channel is therefore free in the Touareg.CAN data busThe 12-channel digital amplifier is controlled with the radio or radio-navigation unit in the Touareg digitally via the CAN data bus.In the Phaeton, the 12-channel digital amplifier is controlled via the front information display and operating unit control unit and the CAN data bus. Self-diagnosis is carried out via the CAN data bus.Legend Input signal Output signal Voltage supply (plus) Earth (minus) CAN data bus lineA J523 J525 R R12 R15Battery Front information display and operating unit control unit (only Phaeton) Digital sound package control unit (only Phaeton) Radio Amplifier Rear left bass loudspeaker38S342_046R17 R20 R21 R22 R23 R101 R102Rear right bass loudspeaker Front left treble loudspeaker Front left bass loudspeaker Front right treble loudspeaker Front right bass loudspeaker Front left mid-range and bass loudspeaker (only Phaeton) Front right mid-range and bass loudspeaker (only Phaeton)R103 R104 R105 R106 R158 SFront left mid-range loudspeaker Front right mid-range loudspeaker Rear left mid-range loudspeaker Rear right mid-range loudspeaker Centre mid-range and treble loudspeaker (Touareg only) Fuse39Sound Systems10-channel DYNAUDIO high-end systemDue to the different locations of the speakers and the different materials (e.g. soft seats and hard windows), configuring an ideal sound inside a vehicle is very difficult. The careful positioning of ten speakers allows balanced sound distribution in the whole interior. The continuous output of the DYNAUDIO 10-channel high-end systems is 600 W. This is distributed in different ways between the individual outputs as, for example, the treble speakers have the highest wattage.S342_03840The DYNAUDIO brand is a guarantee of high-quality sound. DYNAUDIO uses the lightest materials, i.e. the surface emitting the sound is enlarged three to four times while keeping the same speaker weight. The effectiveness is thus increased three to four times. Also the whole area of the single-piece diaphragm is part of the polar pattern. The coil design and magnet construction leads to linear pattern across the whole frequency range resulting in perfect diffusion and better thermal loading capacity (heat discharge).Speaker conceptTo obtain a deep, but also precise bass sound, a total of four bass speakers have been anchored with DYNAUDIO’s MSP membranes in the door construction with low-resonance. For an open and clear mid-range two extra large mid-range speakers with textile cones (80 mm) are mounted in the front doors. Two 20 cm bass speakers are fitted in the front doors and two 16.8 cm bass speakers in the rear.S342_039Filigree treble information is a basic requirement for authentic music playback. Therefore two 48 mm textile treble speakers share the work with the high frequencies in the front. As high frequencies tend to travel in one physical direction, two 40 mm variants at the rear of the vehicle support this important frequency range. The weight advantage (aluminium instead of copper) is used in favour of a longer coil. This allows linear dynamics even at the top levels. The dome in the treble speakers is made from textile instead of plastic.S342_04041Sound SystemsDigital Signal Processing (DSP)DSP technology means that the sound curves can be programmed individually in the amplifier for each speaker output. There are therefore special characteristic curves for each type of vehicle as the signal from each audio channel is prepared specifically. The aim of vehicle-specific sound configuration is to generate as authentic a sound as possible on a virtual stage in front of the occupants.Filter stagesThe sound is processed in the filter stages. The signal amplitudes are reduced or amplified in certain frequency ranges in up to five downstream filter stages.Time-delay elementThe signals for the rear speakers are delayed in the time-delay element by several milliseconds so that concert hall characteristics are created inside the vehicle.Amplifier Filter stages Time-delay elementSignal inputDistortion limiterAmplifier stageSignal output* DDL - Dynamic Distortion LimiterS342_047Distortion limiterDistortion can occur in the sound processing. This is reduced in the distortion limiter, which also keeps the harmonic distortion low.Amplifier stageThe incoming signal from the radio is amplified in the amplifier stage and sent to the outputs.42Sound curveThe sound curve is specially configured for the vehicle interior and stored in a characteristic curve in the amplifier. In this way, frequency ranges where there is a risk of interior components resonating are reduced and other frequencies, which could be weakened by sound absorbing components, are increased.Sound curve graph Amplification dB Countermeasure in amplifier (amplify) Target curve of individual loudspeaker Ideal vehicle-specific sound curveActual curveAmplifier countermeasure (reduce)Frequency HzBass loudspeaker curveMid-range loudspeaker curveTreble loudspeaker curveS342_048The actual sound curve (blue) is dependent on the interior characteristics. It is raised in the bass area and is thus configured for the human ear.The sound delay of the rear speakers is maintained by the time-delay element regardless of the fader setting.43Sound SystemsSpeaker locationsGolf 2004 loudspeaker systemDLT Ø 46 mm in mirror triangleMRS Ø 114 mm in door panel3-way frequency filterBS Ø 200 mm on ACTS Ø 46 mm in panelBS Ø 168 mm on ACAmplifierS342_050LegendDTL MRSDomed treble loudspeaker Mid-range loudspeakerBS TS ACBass loudspeaker Treble loudspeaker Assembly carrierPassat 2006 basic speaker systemDLT Ø 46 mm in mirror triangleMRS Ø 80 mm on ACBS Ø 200 mm on ACTS Ø 46 mm in panelBS Ø 168 mm on ACAmplifierS342_049LegendDTL MRSDomed treble loudspeaker Mid-range loudspeakerBS TS ACBass loudspeaker Treble loudspeaker Assembly carrier44Touareg speaker systemAmplifier DLT Ø 46 mm in mirror triangle MRS Ø 60 mm in door panel BS Ø 220 mm on AC MRS Ø 60mm MRS Ø 60 mm in panel BS Ø 220 mm on ACS342_051LegendDTL MRSDomed treble loudspeaker Mid-range speakerBS TS ACBass speaker Treble speaker Assembly carrierPhaeton speaker systemDLT Ø 46 mm in mirror triangleMRS Ø 60 mm in door panelBS Ø 220 mm on ACMRS Ø 60 mm in panelBS Ø 220 mm on ACAmplifierS342_052LegendDTL MRSDomed treble loudspeaker Mid-range loudspeakerBS TS ACBass loudspeaker Treble loudspeaker Assembly carrier45Aerial SystemsAerial systems for the Golf/Golf PlusVehicles without radio and radio preparationIf the Golf or Golf Plus is ordered without a radio/ radio preparation, there will not be an aerial connection on the left of the rear windscreen. The basic aerial structure in the rear windscreen is always included and identical in specific models. The structure is made up of horizontal and vertical reception wires. The horizontal wires are used to receive horizontally polarised signals and the vertical wires receive vertically polarised signals. There is a hole for the aerial in the roof that is sealed with a plug. The plug is shaped like an aerial (shark fin). It can be replaced with a roof aerial.Decoupling point/connecting point for aerial (as high as possible for better reception) Plug for sealing the aerial holeHorizontal reception wiresVertical reception wiresS342_033Connecting cable for 12-volt rear window heating elementNegative connecting cable for 12-volt rear window heating elementThe aerial wiring is missing in this setup and needs to be fitted if a radio is retrofitted.46Vehicles with single-tuner radios without telephone, navigation, remote startCars that are ordered with the R 100 and RCD 200 (radios with single-tuner concept) radios come with a mast-type roof aerial. The rear windscreen is identical to that on the vehicles without a radio. AM and FM rejector circuits are not needed due to the mast-type aerial being electrically isolated from the heated rear windscreen. The reception is just as good as a windscreen aerial.Roof aerial for AM/FM radio receptionBConnector colour codes (see page 52)Connecting cable for 12-volt rear window heating elementNegative connecting cable for 12-volt rear window heating element S342_032 R 100 radioOnly one rear windscreen version with two aerial connection litz wires is available as a customer service replacement.47Aerial SystemsVehicles with dual-tuner radios without telephone, remote start and navigationThe RCD 300 and RCD 500 radio systems require two aerials for their internal dual-tuner diversity receiver. They use a rear windscreen aerial and a mast-type aerial on the roof as standard. The rear windscreen aerial needs at least one connecting wire to be connected to the aerial structure. If there are two connecting litz wires on the rear windscreen, the aerial will be connected on the left.Windscreen aerial for FM radio receptionFM impedance transformer (aerial amplifier)Roof aerial for AM/FM radio receptionFM rejector circuit +FM rejector circuit -IBRCD 300 radio I Connecting cable for 12-volt rear window heating element Negative connecting cable for 12-volt rear window heating element RCD 500 radio S342_035 B48Vehicles with single-tuner radios with telephone, remote start and/or navigationAs the roof aerial is needed for telephone, remote start and navigation, radio signals need to be received via the rear windscreen aerial. A roof aerial is needed to receive the satellite signals for navigation, the telephone signals and the signal to activate the auxiliary heating (remote start). The signals are decoupled via a filter switch if the car is equipped with a telephone and remote start.Roof aerial Filter switchWindscreen aerial for AM/ FM radio receptionAM/FM impedance transformer (aerial amplifier)ID Telephone reception CRemote startBRNS 300 radioFM rejector circuit +FM rejector circuit -BRCD 200 radio B Connecting cable for 12-volt rear window heating element Negative connecting cable for 12-volt rear window heating element R 100 radio AM rejector circuit S342_03449Aerial SystemsVehicles with diversity and telephone, remote start and/or navigationThe GPS satellite signals for navigation and the telephone signals for calls and activating the auxiliary heating are received via the roof aerial. Two aerials, located in the rear windscreen, are used to receive the radio signals for the two-tuner diversity receiver.Roof aerial Filter switch FM impedance transformer (aerial amplifier) AM/FM impedance transformer (aerial amplifier) I DStart auxiliary heatingCBI RNS-MFD radio FM rejector circuit + FM rejector circuit BIRCD 300 radio BI Connecting cable for 12-volt rear window heating element Negative connecting cable for 12-volt rear window heating elementRCD 500 radio S342_036AM rejector circuit50Aerial systems for the Passat 2006 and Jetta 2006Rear windscreenThere are three types of rear windscreen:● ● ●Rear windscreen without rejector circuits and module mountings Rear windscreen with rejector circuits without GPS and GSM modules Rear windscreen with rejector circuits with GPS and GSM modulesThe contact surfaces for the aerial modules are present on each of the windscreens and the modules can be retrofitted. The wiring is only provided for the ordered equipment version — wires have to be laid when retrofitting.Windscreen layout FM 2 aerial Remote start aerial AM aerial DAB aerial FM 1 aerialS342_041 Aerial module mounting Heating wires GPS module mounting GSM module mountingThis view of the rear windscreen is from inside the car.51Aerial SystemsVariantsAs the mountings for the GSM and GPS modules are simply fastenings and are electrically isolated from the rear windscreen, the installation of the module does not depend on the radio and aerial concept and is only shown as an example in the following diagrams.Vehicles with single-tuner radios and telephone without remote start and/or navigationB D GSM aerial module AM/FM aerial module AM/FM aerial module mounting GSM aerial module mountingBDRear windscreen Mobile phone RCD200 radio S342_042Vehicles with single-tuner radios and telephone, remote start and navigationD C GSM aerial module GSM aerial module mountingKBGPS aerial moduleAM/FM aerial module and remote startIGPS aerial module mounting DRemote start receiver Mobile phone B C Rear windscreenAM/FM aerial module and remote start mounting RNS 300 radio S342_04352Vehicles with diversity and telephone without remote start and/or navigationD B I GSM aerial module GSM aerial module mounting AM/FM aerial module mountingAM/FM aerial module I RCD 300 radio BDMobile phone K B S342_044 Rear windscreenK RCD 500 radioVehicles with diversity and telephone and/or navigation without remote startGPS aerial module D GSM aerial module GPS aerial module mountingBICAM/FM aerial module Diversity boxDABKRear windscreen AM/FM aerial module mounting K C B RNS-MFD radio GSM aerial module mountingMobile phoneS342_04553Aerial SystemsAerial connection systemsFAKRA connectors are used to connect the aerials. These connectors are standardised and identical for all vehicle manufacturers and system or component producers.Table of aerial connector codes Code Use 1-pole Colour Use 1 Coded side 2-pole 8 mm FM Use 2ARadio without supply voltageJet black RAL 9005AM/FMBRadio supply voltageCream RAL 9001FMFMCGPS All except GPS for telematics and navigationSignal blue RAL 5005TVTVDTelephoneClaret violet RAL 4004TVTVETVLeaf green RAL 6002TVTVFTVNut brown RAL 8011TVTVGRemote control Central locking (Kessy)Blue grey RAL 703154CodeUse 1-poleColourUse 1 Coded side 2-pole 8 mmUse 2HGPS for telematics and navigationHeather violet RAL 4003ICode I for auxiliary aerial Diversity Auxiliary heating remote controlBeige RAL 1001KRadio with IF output (aerial diversity)Curry RAL 1027Radio IFRadio IFLCarmine red RAL 3002MPastel orange RAL 2003NPastel green RAL 6019ZZero codingWater blue RAL 502155GlossaryAMAmplitude modulation, electromagnetic wave used to transmit messages. In amplitude modulation, the amplitude of the high frequency is varied.FMFrequency modulation, electromagnetic wave used to transmit messages. In frequency modulation, the frequency of the carrier wave varies in step with the information signal. The amplitude remains constant.AmplitudeThe maximum extent of a sinusoidal wave.FrequencyThe rate of signal oscillations per second.Bass loudspeakerSpeakers for reproducing low frequencies (approx. 40 Hz to 600 Hz).Frequency filterA frequency filter (also called a diplexer) splits up the working ranges of the frequency band between the bass, midrange and treble speakers.Convenience codeIf the radio unit was removed or the car battery disconnected, the anti-theft code does not need to be entered manually as the code number was stored after the first time it was entered in the car. However, if the vehicle and radio code numbers do not match up, for example, because the radio has been fitted in another vehicle, the electronic lock will have to be removed manually.GSMGlobal System for Mobile Communications or Groupe Special Mobile, standard for global mobile telecommunications.GPSGlobal Positioning System, a satellite system set up by the US Department of Defense that aids navigation.Domed treble loudspeakerThis speaker has a dome shape.HertzUnit of measurement for frequency. 1 Hz corresponds with one oscillation per second.56Limit frequencyFrequency, at which a filter starts acting. Generally the frequency, at which the output signal of a circuit falls 3 dB below the original value.RedundantIn electronics, a redundant signal is a signal that is doubled for security reasons.Rejector circuit Mid-range speakerSpeakers for reproducing mid-range frequencies (approx. 600 Hz to 4,000 Hz). A rejector circuit in a vehicle blocks certain frequencies and thus isolates the heating wires in the rear windscreen from the rest of the electrical system. Otherwise there would be a risk of the whole aerial being short-circuited. AM and FM rejector circuits are low-resistance for the direct voltage.MSP diaphragmMagnesium silicate polymer (MSP) diaphragm for precise reproduction of bass tones. It is also very light and durable.Transport modeVarious electrical consumers are switched off to minimise power consumption. The transport mode is, as the name suggests, activated during transport to the dealership or during longer periods when the vehicle is not used. Depending on the vehicle type, it only needs to be activated up to a certain mileage. Use the instructions from the ELSA to activate or deactivate it.PolarisationOscillation of the electrical field vector of an electromagnetic wave in a distant field. There is a distinction between linear (vertical, horizontal) or circular (right and left rotating) polarisation.Treble loudspeaker RCD 300 radio driving school versionThe car speed and the operation of the turn signal (static arrow pointing left or right) appear in the radio display. Speakers for reproducing high frequencies (approx. 4,000 Hz to 20,000 Hz).RDS, Radio Data SystemThis system allows a transmitter to transmit an inaudible “data telegram” with control information to the radio in addition to the FM radio programme. (see SSP 147 Radio Systems ´94)57Test Yourself1. What is amplitude modulation? a) The oscillation of the sinusoidal amplitude is converted into square waves. b) The amplitude of the high frequency is varied in amplitude modulation. c) The frequency of the oscillations is doubled by the highcut. d) The amplitude of the low frequency is varied in amplitude modulation.2.What is frequency modulation? a) The frequency of the amplitude is varied in frequency modulation. b) The amplitude of the mid-range frequency is varied in frequency modulation. c) The cosinoidal oscillation is transformed sinusoidally into digital square-wave signals. d) In frequency modulation, the frequency of the carrier wave varies in step with the information signal.3.What is a highcut? a) Multipath interference in the upper frequency range is “cut”. b) Voltage peaks (high) occurring in the car are cut by means of control electronics. c) The harmonic distortion of the speaker signals is limited. d) The multipath reception is amplified so that more stations can be received.584.Which radio systems are equipped with the dual-tuner diversity system? a) R 100 b) RCD 200 c) RCD 300 d) RCD5005.Which statement about the Volkswagen Golf 2005 is correct? a) There are always two connecting wires for the aerials in the rear windscreen. b) Connecting wires are provided for the aerials depending on the equipment version ordered. c) Customer service always supplies a rear windscreen with two connecting wires as a replacement part. d) The connecting wires for the aerials can be retrofitted with retrofit kit 1H0 925 738.6.Which statement about the Volkswagen Passat 2006 is correct? a) The mountings for the GPS and GSM aerial modules are have an electrical connection to the rear window. b) The mountings for the GPS and GSM aerial modules are have electrically isolated from the rear window. c) Only one version of the rear windscreen is installed. d) The rear windscreen depends on the equipment ordered.Answers: 1 b; 2 d; 3 a; 4 c, d; 5 b, c; 6 b, d59342© VOLKSWAGEN AG, Wolfsburg All rights and rights to make technical alterations reserved. 000.2811.57.20 Technical status 07.2005 Volkswagen Service Training VK-21 Brieffach 1995 38436 Wolfsburg❀ This paper was manufactured from pulp that was bleached without the use of chlorine.