TECHNICAL DOCUMENTATION
SSP 397 2007 Radio Navigation Systems

This PDF is currently unavailable.
Read document text
Service TrainingSelf-study Programme 3972007 Radio/Navigation SystemsDesign and FunctionToday, due to the speed of technical development and the continuing growth in traffic density, it is increasingly important to provide car drivers with navigation systems in the form of orientation aids that support them while driving and do not create an additional distraction. Customers expect systems that are simple and intuitive to use. Users are aware of some of the possibilities of today’s navigation systems from private, non-automotive life.Since these units are used in vehicles and not as a standalone system, but as part of a complex technical network, their adaptation to motorised vehicles requires some time. In order to also take into account the increased amount of time that drivers spend in their cars today, Volkswagen has focussed on a collection of infotainment functions that make the time spent in the vehicle as pleasant as possible and entertaining.You will also find basic information on the topics of radio and radio navigation in self-study programmes no. 199 “The Radio Navigation System” and no. 342 “Radio Systems 2006”.S397_101NEWImportant NoteThe self-study programme shows the design and function of new developments. The contents will not be updated.For current testing, adjustment and repair instructions, refer to the relevant service literature.2ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Basic functions of 2007 Radio Navigation Systems . . . . . . . . . . . . . . . . . . 6 Corridor function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 TMC Traffic Message Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Dynamic navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Route calculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 RNS 300 radio/navigation system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Features and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Networking principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 RNS 300 aerial concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Single-tuner principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Functional diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 RNS 510 radio/navigation system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Features and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Networking principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Touch-sensitive screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Storage media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 DVD player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Display functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Telephone menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Vehicle-specific user interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 RNS 510 data protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 RNS 510 aerial concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Twin-tuner principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Functional diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 List of abbreviations used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Test Yourself . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 613IntroductionNavigation units were used for the first time at Volkswagen Group in the Audi A8 model year 1994. The display, controls and CD drive were still accomodated in separate locations at this time. The CD drive was in the boot of the car, for example. The acoustic guidance came from a separate loudspeaker. This system was also fitted in the Passat from model year 1997.Display in combi instrumentS397_001 Navigation system controlsS397_002S397_003 Drive for navigation DVD in bootThe navigation and radio functions were combined in a new generation of units from model year 1999. The units consisted of the radio receiver unit, the navigation computer, the navigation and audio CD drive, a colour display and the controls for radio, CD player and navigation. Depending on the type of unit, an external aerial diversity box for switching between the aerials was available. The colour screen now allowed the map to be displayed for navigation guidance instead of icons. In addition, the directions were displayed in the dash panel insert display. The acoustic navigation guidance was now heard over the vehicle audio system.S397_004 Volkswagen radio navigation unit in model year 19994The two radio navigation systems RNS 300 and RNS 510 represent the current development stage in the field of vehicle navigation at Volkswagen. The RNS 510, in particular, with its large number of integrated components and interfaces to other units and systems represents a complex infotainment system that unites a large number of functions like radio, TV, CD and DVD playback, navigation as well as telephone operation.The scope of functions and user-friendliness have been increased considerably by using a touch sensitive screen on the RNS 510. In the following section, basic functions like, for example, the corridor function on the RNS 300 or the display functions of the RNS 510 are explained.RNS 300 radio/navigation systemS397_006RNS 510 radio/ navigation systemS397_032Please refer to the corresponding operating manuals for detailed information on use of the numerous functions in the radio/navigation systems.5Basic Functions of 2007 Radio Navigation SystemsCorridor functionThis function on the RNS 300 allows navigation without the navigation CD being inserted. The radio/ navigation system is capable of temporarily storing the complete calculated route. This does not just involve the storage of the exact order of the roads to be taken, but also the areas bordering on the route. These bordering areas form the navigation corridor. This process takes a maximum of 15 to 20 minutes depending on the length of the route to be saved or the data quantity involved. This allows you to remove the navigation CD after completing the process so you can put a music CD into the navigation system CD drive in the meantime, for example.Short distance – wide corridorS397_011The form and area of the saved corridor varies depending on the length of the programmed route as only a limited amount of information can be stored in the memory. A larger area is recorded for the start and destination area than for the simple A to B route. If the route to be navigated is extended, the start and destination area as well as the corridor width becomes smaller. If you leave the corridor, the navigation system will ask the driver to insert the navigation CD again to calculate a new route.Medium distance – narrow corridorS397_0106On very long navigation routes, the memory is only sufficient for the streets immediately along the route and a narrow start and destination area. In this case, the navigation system asks the driver to insert the navigation CD as soon as he leaves the route list so that a new route can be calculated.Long route – smaller corridorS397_009As the surrounding area is saved for shorter navigation routes in addition to the simple route, dynamic navigation is possible to a certain extent in this case without having to insert the navigation CD again. A new destination can in principle be entered within the saved corridor. Once a corridor has been saved, it is only deleted automatically on the RNS 300 after 72 hours unless the old data is overwritten due to a new route calculation with a different start and destination. Due to the automatic storage duration, the RNS 300 has an increased stand-by power consumption.The corridor function is not necessary on the RNS 510 radio/navigation system as the whole navigation DVD is copied to the navigation unit hard drive.Dynamic navigation within the corridorS397_017Original navigation route Alternative route Blocked route section S397_096b7Basic Functions of 2007 Radio Navigation SystemsTraffic Message Channel (TMC)TMC is part of the Radio Data Systems RDS that has been used in Europe since 1987. TMC provides drivers with the latest traffic reports via radios and navigation systems free of charge. Incoming traffic reports, for example, from the police or recovery services are collected at the local and national traffic centres. The reports are forwarded to radio stations who encode these messages digitally and transmit them in the background of radio broadcasts with other RDS data like, for example, the station name.Local traffic centreIncident Informed within minutesReport Collecting & evaluation TMC report National traffic centreS397_106 Display Radio station National traffic centreHow it works A TMC-capable reception unit receives these reports, decodes them and outputs them in text form on the display or acoustically as speech. Navigation systems use the TMC data to calculate alternative routes. The coding for a TMC message consists of a code number from the event table, a code number from the list of all national roads and point locations (localisation table) as well as an expiry time. The latter indicates how long the TMC message will be valid. The coding uses the internationally valid ALERT-C-STANDARD. There is therefore, for example, a list of all national roads (localisation table) for Germany, Belgium, Denmark, France etc. Localisation and event tables are stored on the navigation CD or DVD. The TMC messages are displayed in the language that has been set in the reception unit.8Text 1st service level Traffic problem Slow-moving traffic Jam Tailback longer than 1kmCodeNQTDUCR1 101 102 103D D D D1 1 1U U U U1 1 1 1A50 A1 A101 A39The event table contains all possible traffic incidents, for example, traffic jams, accidents, ice and road works. The localisation table contains the names and ID numbers of all motorways, A roads and country roads. The current localisation table “LT Version 6.0” contains around 24,000 point locations (POINT LOCATION) and 12,000 area locations (AREA LOCATION). Using the TMC coding, it is therefore clearly defined which incident occurred at which location in which direction. In order for a navigation unit to evaluate TMC messages, the navigation system needs to read the localisation table and event table from the navigation CD/DVD.Extract from an event table (example)S397_113Geogr. coordinates north valueGeogr. coordinates east value001 Town 002 Town 003 Junction------A27/A7Wolfsburg Braunschweig Walsrode52°25’17.25’’ 52°16’01.44’’ 52°47’11.99’’ 52°18’52.91’’ 52°18’30.82’’10°46’59.13’’ 10°31’20.80’’ 09°40’14.57’’ 10°31’03.23’’ 10°43’38.00’’ WOB H004 IntersectionA2Braunschweig North 005 IntersectionA2/A39 Wolfsburg/ KönigslutherExtract from a localisation table (simplified example)S397_108TMC on RNS 300 In the RNS 300 radio/navigation system, the localisation table that is required for TMC reception is also downloaded from the navigation CD into the memory just for the area of the corridor. This means that,when there is a traffic jam report, not all data for the new route calculation is available if the navigation CD is not in the CD drive.DirectionRoad numberNameCodeType9Basic Functions of 2007 Radio Navigation SystemsDynamic navigationBasic principleThe dynamic navigation allows the navigation system to automatically provide the driver with a suitable reaction to a traffic incident. Depending on the severity of a recognised problem (blockage, tailback length, jam speed, closure etc.) on the calculated route, it may be a good idea to avoid the congestion area. The requirement for this is that automatic traffic reports (TMC messages) are received and can be processed. The route for the rest of the journey is always recalculated whenever a traffic jam is reported. The route is also re-calculated when the traffic jam report is cleared. The route is re-calculated in accordance with the set route options (depending on system type e.g. fast, short, economical). In this case, the route with the reported jam is also taken into consideration in the calculation as a possible alternative, however, it is given another weighting or another priority than it had in the original, jam-free state. Therefore the alternative route could correspond with the original route. If the TMC options are set to “manual”, the driver needs to confirm the alternative route after the route has been recalculated. The calculated route and time is displayed compared with the original route.S397_015S397_01810Dynamic navigation for corridor functionIf the RNS 300 radio/navigation system calculates a navigation route, it is possible, to a certain extent, to use dynamic navigation without having to insert the navigation CD again particularly when short and medium navigation routes within the saved corridor are involved. This can, however, only work if the road network within the corridor permits. In the adjacent example, the navigation system can offer the driver an alternative route (light green) to the original route (dark green) within the corridor. The orange route cannot be calculated as a route by the system as the road is outside the corridor.S397_016 Original navigation route Alternative route Blocked route section Alternative route outside corridor S397_096When using the dynamic navigation, it should be remembered that, depending on the set route option (see page 12) the TMC messages currently almost only refer to motorways and only to a small extent to A roads. Country and local roads are not covered by TMC messages. In some cases, it is possible for the navigation system to lead the driver to an alternative route via country roads in good time ahead of congestion on a motorway when using dynamic navigation, but the driver may end up in a longer jam that was not detected.11Basic Functions of 2007 Radio Navigation SystemsRoute calculationRoute optionsNavigation system users have a choice of three different route options so they can decide whether they, for example, want to reach the destination on a fast or shorter route or a mixture of both.- Short route - Fast route - Economic routeShort routeFor the short route, the respective shortest route sections are added up to connect the start and destination point. The routes possible are compared and the route is taken as a route list with the shortest kilometre distance. The shortest route distance is chosen between two junctions in a route section. Each route crossing or road entrance represents a junction in digital form. Influencing variables like speed limits or the statistically possible average speed are also not taken into consideration with this route option as long as no other settings like “Avoid motorways” or “Dynamic navigation” are enabled. In this way, it is possible for the journey to take longer despite the shortest route being taken.S397_01212Fast routeWhen this route option is selected, the navigation system takes the road class (motorway, national road, country road, local road), the speed limits for these roads as well as a statistically expected average speed into consideration. This results in a time only calculation for the route assessment. This means that a detour may be involved in some cases to obtain the shortest journey time.S397_014Economic routeWhen this route option is selected, the route planning takes a mixed calculation of time and route distance as a basis. The route is calculated with a distance proportion of 30% and time proportion of 70%.S397_013 Please note: In this example, the difference between the fast and economic route guidance is in the second route section. In the economic setting, the shorter, but slower route is preferred over the faster, but longer route under the aspect of the most favourable ratio of route to duration.13RNS 300 Radio/Navigation SystemThe RNS 300 is the entry-level version of the radio/navigation systems. It has the following controls and display elements on the front.Drive slot for an audio or navigation CDSet audio and volume levelsInfo repeats the last speech message during route guidance and shows the current destination, the current position and the current geo coordinates.Radio switches to radio mode and displays the radio main menu.On/off switch and volume control Pressing the knob switches the radio/navigation system on and off. Turning the control adjusts the volume of the audio output. This also applies to the acoustic telephone and navigation output. Backwards button Controls the active audio source, e.g. jump to previous audio CD track or to the preceding radio station. Press longer: Rewind audio trackCD Switches to audio CD mode or to an external CD changer or MP3 player.14Eject CD If you do not remove the CD within 10 seconds, it will be drawn in again. Set flag destination When you press this button, the navigation system stores the current vehicle position in the destination memory.The four unlabelled function buttons (soft buttons) on the right and left change their function depending on the selected menu.Screen 5" monochrome display with a resolution of 240 x 128 pixelsSetup allows general settings for the current area, e.g. settings for radio operation, screen settings etc.Back to higher menu point for the last setting up to the main menu of a selected menu.Traffic shows traffic messages of current TMC station.S397_005Menu button Rotary press knob for selecting and confirming menus, submenus or values. The menu button does not have a mechanical start and end point.Nav switches to the navigation main menuForwards button Controls the active audio source, e.g. jump to next audio CD track or to the next radio station. Press longer: Fast forward audio track15RNS 300 Radio/Navigation SystemFeatures and controls on RNS 300Features- Output stage with 4 x 20 Watt output, optionally two or four loudspeakers can be connected - 5" monochrome display with a resolution of 240 x 128 pixels - RDS, FM and AM Europe radio - FM single tuner with an aerial - Integrated CD drive - Playback functions for MP3 data - Navigation symbols shown in dash panel insert display (only on Highline version of control unit with display in dash panel insert) - Route guidance using symbols and speech - Navigation also possible without inserting navigation CD (corridor function) - TMC function - CD navigation (data CD for different countries) - Optionally compatible with mobile phone preparation and hands-free system - Optionally compatible with multifunction steering wheel - Optionally compatible with external CD changer (CDC)ControlsThe RNS 300 is operated with hard buttons and soft buttons.Hard buttons Hard buttons are buttons, switches, sliders or control knobs on an electronic unit that have permanent and fixed function assignments. Hard buttons can be recognised from a permanent label on the control.S397_019There are currently no plans to combine the RNS 300 radio/navigation system with the Volkswagen sound system.16Soft buttons The four buttons on the left and right next to the display are soft buttons on the RNS 300 radio/ navigation system. Unlike the hard buttons, the functions assigned to these buttons change depending on the current mode (e.g. radio, navigation, CD player etc.). The soft button label changes on the display depending on which function you are using. The use of soft buttons gives a unit more variations possible, for example new functions to be added in future software updates. This flexibility is also advantageous if different button functions are required for different export countries. Hard and soft buttons can also be programmed so that different functions are carried out depending on whether you press the button briefly or hold it down.S397_02017RNS 300 Radio/Navigation SystemNetworking principleIn addition to the internal networking of the different device components like the radio or CD drive, the RNS 300 is connected to other control units via the CAN data bus so that all functions of the radio/navigation unit are distributed over several control units.FM aerialCD drive5" liquid crystal monochrome screenButton moduleFM/AM radio Single tuner with RDS/TMC Navigation module with dynamic guidance, GPS Media & MP3 playback module Audio amplifier 4 x 20 WattGPS aerialCAN interface Components inside unit18GSM aerialTelephone and telematics control unit J526 Panasonic bus Multimedia system display unit 2 control unit J7476-disc CD changerData bus diagnostic interface J533 Infotainment CAN data busMultifunction steering wheel control unit J453Convenience CAN data busABS control unit J104External componentsPowertrain CAN data busS397_03319RNS 300 Radio/Navigation SystemRNS 300 aerial conceptThe aerial system for the RNS 300 radio/navigation system may differ depending on the vehicle type.Aerial system in the TiguanIf the Tiguan is equipped with the RNS 300, it will have a roof aerial that is connected to the GPS and the AM/FM tuner module in the radio/navigation system and the GSM module in the mobile phone. The aerial structure in the rear windscreen is not used. Compared with the Golf, the AM/FM blocking circuits as well as the AM/FM impedance transformers are omitted.Roof aerial AM/ FM/GSM TelGPSS397_118Aerial system in Golf estateWhen the RNS 300 is fitted in the Volkswagen Golf Estate, the aerial system available with the basic equipment consists of an AM/FM window aerial in the right-hand side window and the shark fin aerial on the vehicle roof. No blocking circuits are required since the aerial structure is only on the side window.Roof aerialGPSFM/AM impedance transformerS397_09720Single-tuner principleRadio/navigation systems with an FMtuner work according to the single-tuner principle, those with two FMtuners according to the twin-tuner principle. The RNS 300 radio/navigation system has one single FMtuner. The RNS saves all received frequencies for a recognised station in a station list. When changing stations, the unit then selects the frequency with the best reception from the list. The reception frequency is always updated to the frequency with the best reception when the unit is switched on and off as well as when you switch between different radio stations.FM/AM aerial FM/AM tunerTMC tunerFrequency memoryNav moduleDemodulatorRadio Data SystemIf the FM tuner detects that the reception quality of the selected radio station is deteriorating, it will switch to a different broadcasting station with better reception quality. The switch-over pause is sometimes perceived as a minimal radio mute pause. In the single-tuner principle, the simultaneous evaluation of TMC broadcasting information and thus dynamic navigation is also possible if a TMCcompatible station is set. The TMC-compatible station needs to be set as a second FM tuner and is not available to evaluate the TMC message parallel to another station.S397_098If a single-tuner system leaves the reception area of a station, the system may in some cases lose the station if the reception quality of all stored broadcasting stations is not sufficient and the reception frequencies were not updated by a manual change of radio station.21RNS 300 Radio/Navigation SystemFunctional diagramR50 Infotainment CAN data bus A+ R11 R182 R65SR108 R54 R149R199J503R20R21R15R14R16R17R23R2222Legend J503 J519 R11 R14 R15 R16 R17 R20 R21 R22 R23 R41 R50 R54 R65 R108 R149 R182 R199 S A Control unit with display for radio and navigation Onboard supply control unit Aerial Rear left treble loudspeaker Rear left bass loudspeaker Rear right treble loudspeaker Rear right bass loudspeaker Front left treble loudspeaker Front left bass loudspeaker Front right treble loudspeaker Front right bass loudspeaker CD changer* GPS aerial Mobile telephone* Telephone aerial Left aerial module Remote control receiver for auxiliary coolant heater* Auxiliary heater aerial Connection for external audio sources* Fuse BatteryJ519* depending on equipment The functional diagram shows the RNS 300 radio navigation system in the Touran.R41S397_xxxS397_110Input signal Output signal Positive Earth CAN data bus23RNS 510 Radio/Navigation SystemThis radio/navigation system currently has the largest number of functions among all radio/navigation systems from Volkswagen. One basic difference in the RNS 510 system architecture from the RNS 300 is a built-in hard drive and the touch-sensitive screen.Backwards and forwards button They affect the respective active audio or video source. Radio Switches to the radio main menu.CD/DVD drive slot For audio CDs, MP3 CDs, audio DVDs, navigation DVDs and video DVDsMedia Switches to CD, DVD, HDD, SD or AUX playback mode depending on what medium is available.Phone Shows the telephone main menu. If a premium phone preparation is not connected, this button is simply used to mute the audio output.Tone Switches to the main menu for audio output values on the radio/navigation system. There you can set the sound balance, sound levels etc.On/off switch and volume control Pressing the rotary press knob, switches the unit on and off. Turning it adjusts the volume of the audio output. The two rotary pushbuttons on the unit do not have mechanical end points.SD card reader slot You can insert SD memory cards e.g. with MP3 music data for audio playback into this slot.In the Touareg, the SD card reader is vertical on the left-hand side of the screen. (see page 37)24Button for ejecting medium Pressing this button ejects the inserted audio, navigation or video CD/DVD. If you do not remove the medium within 10 seconds, the unit will draw the CD or DVD in again. Playback driving instruction This button plays back the current guidance instruction for the selected route.Screen Touch-sensitive 6.5" colour display (touch screen) with resolution of 800 x 480 pixelsMAP Calls up map display from current navigation DVD or switches to a split-screen display.NAV Starts or switches to navigation mode and shows the navigation main menu.TRAFFIC Shows the current TMC messages from the set station.S397_007Right-hand rotary pushbutton Depending on the set function, this knob can be used, for example, to switch between music tracks, manual selection of a radio station or to set the scale of the map display in navigation mode.SETUP Takes you to the main menu for configuring radio/navigation system features like, for example, screen, radio, video etc.25RNS 510 Radio/Navigation SystemFeatures and controls on RNS 510Features- Output stage with 4 x 20 Watt output, optionally two or four loudspeakers can be connected - RDS, FM and AM Europe radio - FM twin tuner with internal diversity - SDARS tuner (depending on equipment) - Integrated DVD drive - Touch-sensitive 6.5" multi-colour display (MFD) with a resolution of 800 x 480 pixels - Media support for MP3 and WMA audio data - Navigation symbols shown in dash panel insert display - Route guidance with symbols, map display and speech - Maps also displayed in 3D bird’s eye view (threedimensional display) - Integrated drive hard for storing navigation and audio data (navigation also possible without inserting navigation DVD) - TMC function - DVD navigation (data DVD for western or eastern Europe) - DVD audio function - DVD video function - DAB (country-specific, used at a later date) - Integrated SD memory card reader - Optionally compatible with Volkswagen TV tuner - Optionally compatible with mobile phone preparation including hands-free system - Optionally compatible with multifunction steering wheel - Speech control (depending on country, later introduction) - Optionally compatible with reversing camera (Rear-View)Due to the large number of functions included or modules as well as the PC technology on which the RNS 510 is based, it takes a few seconds longer to start (boot) the unit than with previous navigation systems.Support of the Media Device Interface (MDI), e.g. for an iPod or other external, compatible storage media, will be added at a later date.26ControlsHard buttons and soft buttons are also used to operate the RNS 510. However, the touch-sensitive screen (touch screen) has brought a new operating philosophy for the soft buttons to the vehicle.Hard buttons The controls with fixed assignments are at the side and at the top of the RNS 510 touch screen.S397_023Soft buttons All other buttons required for operation of the RNS 510 appear as buttons reproduced with graphics on the touch screen surface. This has the advantage that a “virtual” button can show its label in the respective local language. Furthermore it can always be placed on the screen in a position that seems to be logical with regard to user-friendliness, subject or graphics. This combined display and operation concept allows more possibilities in the design of the screen interface. This is also increasingly important for expected software updates as there is greater flexibility.S397_022 Virtual buttons on touch screen27RNS 510 Radio/Navigation SystemNetworking principleThe networking possibilities for the RNS 510 are by far more complex than on the RNS 300. For this reason, the adjacent diagram can only provide an overview without looking at the interaction or all usage possibilities.CD/DVD driveDAB*/ SDARS** tuner DAB*/ SDARS** aerial Hard driveTouch-sensitive 6.5" colour liquid crystal screenButton moduleFM aerialFM/AM radio 2 tuners with RDS & Diversity AM/FM aerial TMC tuner (single tuner) Navigation module with dynamic guidanceSD card readerGPS aerialAudio amplifier 4 x 20 Watt Audio/video inputGPS moduleGyro moduleSpeech control module (Japan/China) Microphone CAN interfaceComponents inside unit* - later introduction ** - depending on equipment28External componentsGSM aerialTelephone and telematics control unit J526 Media Device Interface MDI (later introduction) Panasonic box Digital sound package amplifier R184 (optional)6-disc CD changerReversing camera (rear-view)TV tunerData bus diagnostic interface J533Climatronic control unit J255 (later introduction) Multifunction steering wheel control unit J453 Infotainment CAN data bus ABS control unit J104Powertrain CAN data busS397_03529RNS 510 Radio/Navigation SystemTouch-sensitive display (touch screen)The screen forms an interface between technology and humans on multimedia systems. It allows a large amount of complex information to be provided in a simple and well-organised way. By using touch-sensitive screens, the user can be provided with a larger quantity of information and choices than before thanks to the freely programmable virtual buttons without making the display area and the dimensions of the unit itself too large. This has been achieved with a complex menu structure through which users can navigate with the aid of the virtual buttons. The advantages of the touch screen technology are: - Any button shapes and sizes can be reproduced virtually. They are freely programmable as are the submenus and in-screen displays. - The button labels can be shown in the local language. - The screen display and the functions can be configured in any way and at any time with later software upgrades. - Direct operation (finger, glove) - Touch recognition from 10g touching pressure - Low power consumption (approx. 1 mA)Example of using the touch screen to select a path to a target menu within a menu structureSelection of a submenu in main menu, example: Submenu 1-2 in main menu 1Selection of next menu level, example: Sub-submenu 1-2-2 Selection of next menu level, example: Target menu 1-2-2-3Setting a value with a slider in the target menuS397_02430Structure of a touch screenLegend a Light source in monitor b TFT display c Delay layer d Glass base layer e Coating of conductive indium tin oxide alloy f Spacer dots g Flexible outer layer of glass h Polarisation filter i Touch-sensitive components k Screen picture kS397_025 a b c d e f e g h iThe screen on the RNS 510 radio/navigation system has several layers. The touch-sensitive surface is placed in front of the actual screen (TFT display). On this unit, it is made up of a rigid glass layer that is 1.1mm thick and a flexible outer layer also made from glass that is 0.2mm thick. These two glass layers are separated from each other by non-conductive spacers, called spacer dots. Both glass layers have a conductive layer of indium tin oxide on the surfaces facing each other. This is required for the touch screen function.A delay layer is applied between the TFT display surface and the two glass layers. It has the task of changing the polarisation of the light waves of the monitor picture. The outer glass layer of the touch screen has a polarisation film to reduce reflections. Despite this, the reflections that occur are partly caused by the use of glass materials that are slightly higher than those on touch-sensitive screens with a flexible outer layer made from polyester.Please treat the outer layer of the touch screen with care to avoid damaging it.31RNS 510 Radio/Navigation SystemHow the touch screen worksThe touch screen used on the RNS 510 radio navigation system works according to the resistive principle. This means that the touch recognition uses resistance-based technology. When you touch the touch screen, the outer glass layer is pressed against the glass base layer. The two indium tin oxide coatings, which are separated by the spacer dots when the screen is not touched, come into electrical contact.Outer glass layer S397_027 Spacer dots Touch pointTo simplify explanation, you can imagine the touchsensitive surface that is formed by the two indium tin oxide-coated glass layers as a coordinate system. Each touch point on this surface can be located with a horizontal and vertical distance from the edge of the monitor. Electrical resistances are used as values for the horizontal and vertical distances. A horizontal and vertical coordinate value is determined by current flow direction of the two coatings being turned 90° towards each other. A direct voltage of 5 volts is applied 25 times per second alternating to the upper or lower indium tin oxide layer.Indium tin oxide layer Base layer made from glassS397_026The touch screen signals are evaluated via a separate controller in the radio/navigation system.S397_029 Indium tin oxide layers32Ux total S397_038RxThe horizontal and vertical monitor coordinates are determined based on the principle of the voltage divider. Another example of this functioning principle is the potentiometer. To clarify the procedures taking place in the touchsensitive layer of the touch screen, we will break down the process into two steps: - measurement in horizontal direction and - measurement in vertical direction Measurement in horizontal directionTouch pointBack indium tin oxide layerFront indium tin oxide layerFront indium tin oxide layer Back indium tin oxide layer Voltage division Ux total Part resistances R x1 R x2 U x2 Measured voltage Ux2at resistance Rx2The touch screen controller first applies a voltage of 5 volt (Ux total) to the rear indium tin oxide layer so that a current flows through this coating in horizontal direction (X-direction). The total path between the two voltage poles has a fixed resistance Rx. When the touch screen is touched, an electrical contact is created from the front to the back layer. The contact point divides the total resistance between the two voltage poles of the rear coating into the two part resistances Rx1 and Rx2. The controller now measures the voltage Ux2 at part resistance Rx2 with the help of the top coating. The controller uses the measured voltage to calculate the value for the distance from the touch point to the edge of the monitor and thus determines the X-coordinate of the touch point on the screen.Touch pointCoordinates calculation Controller Output Monitor Screen coordinate in X directionXS397_03633RNS 510 Radio/Navigation SystemMeasurement in vertical direction To determine the second coordinate of the touch point, the controller applies the voltage (Uy total) of 5 volt to the front indium tin oxide layer. The current now flows in vertical direction (Y-direction). There is also a fixed resistance Ry between the two voltage poles here. When the screen is touched, two part resistances Ry1 and Ry2 occur again in accordance with the principle of voltage division. The controller measures the voltage Uy2 at resistance Ry2 and uses it to calculate the vertical coordinate value of the touch point. Any touch point on the monitor surface can be clearly determined from the calculated X and Y-coordinates. If an action is programmed for a coordinate point in the software, e.g. pixel of a “Fast forward media” soft button, the system will carry out this command when the screen is touch at this point.RyUy total S397_039Front indium tin oxide layerBack indium tin oxide layer Voltage dividerU y totalU y2 R y2Touch pointR y1Coordinates calculationController Output Monitor Screen coordinate in Y direction Y S397_03734Polarisation filter on touch screenLarge glare effect without polarisation filmGlare effect External lightSmooth surfaces like glass reflect light so that the picture on a monitor is difficult to see when light conditions are too bright. Polarisation filters are used to change the reflection behaviour and thus reduce glare effects. They consist of a plastic film of long, parallel molecule chains.Viewer Monitor picture S397_042 Polarised light Light wavesBasics Electromagnetic beams like visible light, can be imagined as waves. With polarised light, as emitted by lasers, for example, all waves oscillate only on one oscillation level. With other light sources, for example, like the sun, the oscillations are on many different oscillation levels that are turned against each other. This kind of light is non-polarised light.One oscillation level S397_040 Non-polarised lightDifferent oscillation levels S397_041 Lower glare effect thanks to polarisation film Polarisation filmThe effect of polarisation films is that only light can pass through the polarisation film that oscillates in one level, which is set by the parallel arrangement of the molecule chains. Waves that oscillate in other levels are absorbed by the film. This means that only a fraction of the external light is reflected and the glare effect is reduced considerably.Viewer Monitor picture S397_04335RNS 510 Radio/Navigation SystemStorage mediaThe RNS 510 radio navigation system uses an internal hard drive as a storage medium and a reader for digital memory cards (SD cards).Internal hard drive of RNS 510The RNS 510 has a 2.5" IDE single-platter hard drive to handle and manage large quantities of data. (IDE = Integrated Drive Electronics) Unlike the hard drives used in PCs, the drive used in the RNS 510 is specially designed for automotive use and has been adapted to the associated requirements. This means it is more resistant to vibrations and has a greater working temperature range (-20°C to + 80°C) than conventional hard drives. It also has a reduced standard speed of 4172rpm and a greater error tolerance. The hard drive currently has a memory capacity of 30 gigabytes (Gb) with a fixed partitioning. Approx. 10Gb is for navigation data and approx. 20Gb for media data, for example, Windows Media Audio data (WMA), Motion Pictures expert group layer-3 data (MP3), PLAYLISTS etc. Therefore only data formats are stored on the hard drive.S397_045It is not possible to store DVD, audio CD, video and CDA data on the media partition of the internal hard drive for copyright reasons as well as for technical reasons with JPEG formats.The hard drive is permanently built into the radio/navigation system and not intended for exchange at workshops.36SD card readerUsing the reader built into the RNS 510, it is possible to read SD cards as used in mobile devices and PCs. SD stands for “Secure Digital”. SD cards are rewritable storage media (flash memory). The RNS510 can currently read SD cards with a capacity of up to 2 gigabytes. The card is controlled by a controller integrated in the reader. Depending on the memory card quality, different reading speeds of up to 6Mb per second are possible. The reader used in the RNS 510 is programmed so that only music and audio data (MP3, WMA and PLAYLISTS) can be uploaded from the memory card to the hard drive. Other data formats are not supported by the device reading program (browser). It is possible to store the data from the SD memory card on the hard drive. However, it is not possible to transfer data from the hard drive in the radio/ navigation system to an SD memory card (copyright). The slot for the SD memory cards is on the control panel and is not labelled. Its position depends on the type of vehicle. In the Touareg, the slot is to the left of the display and, in all other variants, it is underneath the display.S397_044Front panel of RNS 510 with SD memory card reader, for example, in Golf, Tiguan, Touran and PassatS397_120Front panel of RNS 510 with SD memory card reader in TouaregS397_12137RNS 510 Radio/Navigation SystemDVD playerSince a DVD drive is used in the RNS 510, it is also possible to play standard video DVDs in addition to reading the navigation DVD that comes with the system. As DVDs (Digital Versatile Discs) use different regional codes (DVD code) depending on the supplier or country of purchase, the DVD player needs to be set to the valid code. It is possible to switch between different DVD codes in the “Adaptation” diagnosis mode.S397_066The DVD player in the RNS 510 supports the following reading formats: Navigation DVD data (no navigation CDs) DVD video DVD audio Data CDs and data DVDs with the MP3 and WMA data formats as well as playlists - Music CDs in CDA format (normal purchased music CD) The MP3, WMA and playlist data formats can also be saved on the internal hard drive.S397_046If sometimes an MP3 track cannot be played back by the DVD player, this could be caused by the DRM copy protection of the track. DRM stands for “Digital Rights Management”. This license is not supported by the RNS 510.38Display functionsS397_102The touch screen on the RNS 510 radio/navigation system has numerous display functions and display possibilities. In addition to the graphics menus for radio, telephone and various other settings, it can also display real pictures for the TV, video and reversing camera (optional) functions. A video signal can either be fed in internally via the DVD player or externally via the AV connection on the radio/navigation system. It is planned for the future to allow adjustment of the air conditioning system with graphics via the touch screen on the radio/navigation system. An MDI interface is also planned. MDI stands for “Media Device Interface”. This is an interface to which various electronic devices like, for example, MP3 players, handhelds, USB sticks, external DVD devices and other compatible playback units can be connected and displayed on the touch screen.The following functions are explained briefly in the following section: - Menu switch-over support - Alpha blending - In-screen menu - Split-screen function - Shadowing - Power down storing - Store information history HMI You will find more information on use of the functions in the operating manual for the radio/navigation system.The screen content shown in the following section is from the radio/navigation system when set to German and serves simply as an example. Please refer to the corresponding operating manuals for the labels of the virtual buttons in other languages.39RNS 510 Radio/Navigation SystemMenu switch-over supportDepending on the screen interface to be displayed and the associated windows, selection menus and submenus, it takes different amounts of time until all picture information is shown on the screen. To minimise this time, the data collection for the screen display runs in the background. The new screen is only displayed once all necessary information is available. This procedure avoids step by step build up of the screen. This means, however, that there is a short, noticeable reaction time between operation and display.Alpha blendingThe displayed windows and menus are processed graphically and programmed according to function in order to show the different information on the VGA display of the RNS 510 in the easiest way for the user. One type of preparation is alpha blending, which means the scalable transparency of screen elements like on an in-screen display. The transparency information is saved in the so-called alpha channel for computer graphics. This refers to the individual control of each individual pixel on the screen in terms of its transparency and its colour value. Specifying a value for the transparency defines whether the screen pixel reproduces the information from the background image, the superimposed window or a mixture of both.Screen elements shining throughS397_057Different transparency levelsS397_051Different brightness levelsS397_05640The transparency can be achieved in the form of different effects: - Light glimmering of the background when windows or screen elements are displayed, for example, a volume bar. - Different transparency levels of a display level like a map interface for navigation display and simultaneous display of submenu - Different window brightness levels for submenus like control fields and controls, to give the surface an optical structure (3D effect). - Shimmering of edge or transition area between main and overlaid window to create a feeling of space.Edges of windows shining throughS397_067 S397_068In-screen menuIn-screen display, i.e. picture-in-picture display, is when a submenu is shown simultaneously in a video or TV picture (also reversing camera). For example, DVD playback is not affected by permanently visible soft buttons, instead menus are only shown over the actual picture when the screen is touched.In-screen menu during video playbackS397_05441RNS 510 Radio/Navigation SystemSplit-screen functionIn “Navigation” mode, the RNS 510 has a function for split-screen display. An additional window is used that is displayed over the current screen content. This allows additional information to be displayed on the touch screen for the user. The user can specify whether this additional window is displayed on the left or right. It is, for example, possible to display the “Compass”, “Additional Map” and “GPS Viewer” submenus in split-screen mode while the map is displayed. If route guidance is active at the same time, the “Symbol Display”, “Overview” and “Manoeuvre List” submenus are also possible.“Compass” split-screenS397_055“Manoeuvre List” split-screenS397_074“Additional Map” split-screen (night design)S397_052“Symbol” split-screenS397_075“GPS Viewer” split-screenS397_053“Overview” split-screenS397_07242ShadowingThe virtual buttons or in-screen menus are emphasised as separate screen elements by means of shadowing. Shadowing means that the displayed button casts a shadow so that it seems raised from the background.S397_070 Shadow under virtual buttonsStore information history HMIWhen switching from a main menu or start menu to a submenu, the function parameters from the exited window including any control adjustments made are saved. When you return to that menu window, these values are loaded from the memory and displayed again.Power down storingThe RNS 510 has a power-down storing function to prevent current settings or current route guidance being lost, for example, if the system is accidentally switched off. All current data is stored in the RAM of the unit. When the unit is switched off, the RAM is supplied with power for a further 10 minutes so that the data stored there is not lost. For this reason, the RNS 510 has a higher stand-by current during this time. If the system is switched on again within 10 minutes, it will load the data from the RAM back into the system so that the current settings are available again or the route guidance started before switch-off can be continued. If the system is switched off for longer than 10 minutes, the power supply to the RAM is also interrupted and the data stored there is lost. When switched on again, the system starts with the menu for the last media source. The media sources are therefore available to the user just after the unit is switched on even though the navigation system is starting up in the background.43RNS 510 Radio/Navigation SystemDisplay types in navigation modeThere are three display types or perspectives for displaying maps in navigation mode: - 2D map display - topographic 2D display - 3D bird’s eye view The map can be shown at different scales in all display types.2D map displayThis view is a conventional map view from above. The map is a so-called theme map, in this case a road map focussing on the roads. The surrounding area is shown in the background and is reduced to a graphical distinction of inhabited areas, free spaces, wooded areas and water. The display can be set to driving or north alignment.2D map displayS397_050Topographic 2D displayThe topographic display corresponds with a special two-dimensional view of the countryside. In addition to built-up areas, it shows water, wooded areas and green areas by means of a colour distinction and height differences on the terrain. The display can be set to driving or north alignment like the 2D map display.Colour height distinction in the topographic map displayS397_104443D bird’s eye viewThis virtual 3D view corresponds with a “tilted” 2D-map view and gives you the impression that you are looking at the map landscape from a raised point. The surface display still corresponds with a twodimensional view that has been given a feeling of perspective by rotating the map surface. This map display can only be aligned with the driving direction.The same map section in bird’s eye view setting S397_049Zoom types in navigation modeThe navigation mode has three different zoom functions for displaying the details on the map: - Manual zoom - Autozoom - Orientation zoomManual zoomActivating the manual zoom disables all automatic zoom settings. You can use the right-hand rotary knob to set the map scale in 30 steps from 25m/cm up to 500km/cm. The m/cm or km/cm measurement figure describes the number of metres or kilometres on the original landscape per centimetre of map on the screen.S397_077 Selection of enlargement level with manual zoom using the right-hand rotary knob45RNS 510 Radio/Navigation SystemAutozoomThis is a dynamic zoom function that is constantly adapted. When it is switched on, the navigation system calculates the best display scale depending on the road class being used and the distance to the next manoeuvre point. The road classes are divided into the following five categories: - Residential roads - Urban roads - District roads - Country roads - Motorways There are therefore five standard starting zoom values. Depending on the type of manoeuvre point, the autozoom function is also called crossroads or exit zoom. Manoeuvre points are all features that can occur on the roads, for example, entrances, crossroads, motorway slip roads and motorway junctions. The largest possible zoom factor is set as you approach a relevant manoeuvre point so that both the current vehicle position and also the manoeuvre point can be seen at the same time on the screen. Once the manoeuvre point has been passed and the next one is still a sufficient distance away, the system switches back to the previous display scale or the standard zoom value for that particular road class. If the autozoom function is activated in an off-road position, the current scale will be maintained until an on-road position is recognised and the autozoom function becomes active. If the driver is using waypoint mode, i.e. driving to route points set by the user, autozoom is not possible. The driver or the user cannot influence the autozoom function manually.Automatic selection of the best display size S397_073 S397_07946Orientation zoomThis is a convenience function for quick orientation via the current position on the map. The navigation system automatically and smoothly zooms out from the current display by a scale factor of 10, e.g. from 500m/cm to 5,000m/cm and then back. Above a display scale of 75km/cm, the orientation zoom is only available to a limited extent as the maximum displayable zoom level of 500km/cm does not allow the system to zoom out by a factor of 10.S397_105Telephone menuS397_085Due to the large operating and display area of the touch screen, it has been possible to use a separate menu to operate the telephone on the RNS 510. This also includes a keypad that can be called up for manual dialling with buttons in a user friendly size.S397_083S397_084Upon introduction of the new “Premium Light” mobile phone preparation, the separate 10-button keypad for manual dialling in the dashboard for the “Premium” mobile phone preparation was discontinued. If a vehicle is not equipped with the RNS 510 or with other devices that have a touch screen, for example, the RCD 510 radio, it is only possible to operate the “UMPP Premium Light” with the multifunction steering wheel or alternatively with the steering column switch depending on the vehicle model and equipment.47RNS 510 Radio/Navigation SystemVehicle-specific user interfacesOn the RNS 510 radio/navigation system, a large number of the controls appear on the touch screen as described. Furthermore there are different pre-programmed user interface designs for this system depending on the vehicle type. There are three different coding variants for the RNS 510 that can be selected and activated with the VAS tester. The memory requirement for the displays stored for each version is 2Mb each. There are four different dim values available for all versions that can be set via the menu.The user interfaces for radio, navigation and telephone in the Tiguan, Eos, Golf Plus, Sharan NF and PassatRadioNavigationS397_090 S397_087 Telephone S397_09348The user interfaces for radio, navigation and telephone in the Touran, T5 Multivan, Touareg, Caddy and CC/Coupé RadioNavigationS397_089 S397_086 Telephone The user interfaces for radio, navigation and telephone in the Golf R32, Golf GTI/GT, Scirocco and Passat R36 Radio S397_092NavigationS397_091 S397_088 Telephone S397_09449RNS 510 Radio/Navigation SystemRNS 510 data protocolsIn data processing, a protocol is the method for exchanging data between computers. The protocol, for example, the File Transfer Protocol FTP, is to a certain extent the language in which computers “converse”. In order for the computers to communicate, they need to speak the same language. The RNS 510 uses two different protocols to transfer data between the control unit with display in dash panel insert and the navigation system or other control units that exchange display data: - the DDP display data protocol and - the BAP operating and display protocol.DDP display data protocolIn this communication language between the navigation system and dash panel insert, the RNS 510 takes over control of the display data that should be displayed on the screen for the Highline version. A fixed and constant data channel is set up between the two components via the CAN data bus lines. The display data protocol runs parallel to the CAN data protocol for function and diagnosis data. The telephone preparation control unit also controls the display data in the control unit with display in dash panel insert, for example, using the display data protocol. The current control units with display in dash panel insert can currently only process this protocol.S397_08150BAP operating and display protocolThis new data protocol represents the future communication protocol for display data. The aim is to switch all control units that exchange display and operating data over to this new standard. The BAP operating and display protocol does not assign a fixed data channel, but instead the control unit supplying the display data transmits this data universally in BAP format to the CAN data bus. This kind of data provision is also called broadcasting because of similarities with radio. In radio, the stations are also broadcast by the transmitter for general reception. The displaying control unit, in this example, the control unit with display in dash panel insert, reads and displays the data supplied by the radio/navigation system. This means that the control unit with display in dash panel insert is itself responsible for controlling the display. In this case, it would continue to watch the BAP data packages and only update its display when new BAP message content is actually available. One more specific example is the display of telephone data via the radio/navigation system. The data from the mobile telephone operating electronics control unit J412 is received, read and displayed by the RNS 510 radio/navigation system as a displaying control unit using this data protocol.S397_10351RNS 510 Radio/Navigation SystemFurther CAN signals for communicationThe radio/navigation system uses a large number of messages and being a display control unit which is incorporated into the CAN data bus this has numerous control functions.For example, it receives the following information via the CAN data bus protocol: Onboard supply control unit Data bus diagnostic interface Dim signal, terminal status, reversing light Time, date, target component list, speed signal (Gala), pulse signal (navigation), transport mode, vehicle platform info Control unit with display in dash panel insert Convenience code, display language Telephone and telematics control unit Telephone message (mute request) Multifunction steering wheel control unit Control via the multifunction steering wheel Reversing camera system control unit Reversing camera display TV tuner TV displayRNS 510 aerial conceptRear windscreen heating voltage supplyThe aerial system has two rear windscreen aerials and a roof aerial if we take the Tiguan as an example.FM blocking circuit Roof aerialFM blocking circuit AM/ FM1/AM and FM reception as well as the signals for the navigation system (GPS) and the telephone (GSM) are received via the roof aerial. An aerial structure in the rear windscreen of the Tiguan is used to connect the second FM tuner. An FM impedance transformer is required for this connection. Furthermore the rear windscreen heating circuit needs to be decoupled from the onboard supply signals with two FM blocking circuits.GSM FM impedance transformer FM2 Tel GPSS397_11952Twin-tuner principleTwo different, processed aerial signals are required for the twin-tuner principle. This is achieved by means of a spatial separation of the aerials and separate amplification of the signals. These aerial signals are used either as alternating or individually or as a sum of both signals depending on the reception quality. This means that one of the two internal tuners is responsible for the current reception of the station being listened to while the other receives the associated RDS data and simultaneously searches for broadcasting stations with better reception quality in the background. If it does find a better quality reception, the two reception tuners swap roles. This process is called switch diversity. If the reception power as measured in decibels (dB) falls below a certain value, both aerial signals are used at the same time to obtain the station signals by being adaptively combined. The aim is to create the largest possible space between the station and interference signal (interference voltage space). This process is called phase diversity. Furthermore a third tuner for receiving TMC messages is permanently connected to one of the aerial inputs. These messages are required for dynamic navigation.Tuner 1Tuner 2Nav moduleTMC tunerSignal converterDemodulator 1Demodulator 2Radio Data System 1Radio Data System 2S397_09953RNS 510 Radio/Navigation SystemFunctional diagramA+ Infotainment CAN data bus R11 R93 R50 R182 R65J412SR108R109R54R149R199J503R20R21R15R14R16R17R23R2254Legend J412 J503 J519 R11 R14 R15 R16 R17 R20 R21 R22 R23 R41 R50 R54 R65 R93 R108 R109 R149 R182 R199 S A Mobile telephone operating electronics control unit* Control unit with display for radio and navigation Onboard supply control unit Aerial Rear left treble loudspeaker Rear left bass loudspeaker Rear right treble loudspeaker Rear right bass loudspeaker Front left treble loudspeaker Front left bass loudspeaker Front right treble loudspeaker Front right bass loudspeaker CD changer* GPS aerial Mobile telephone* Telephone aerial Radio aerial 2 Left aerial module Right aerial module Remote control receiver for auxiliary coolant heater* Auxiliary heater aerial Connection for external audio sources* Fuse BatteryJ519* depending on equipmentR41The functional diagram shows the RNS 510 radio navigation system in the Touran.S397_109Input signal Output signal Positive Earth CAN data bus55ServiceDemo mode on RNS 510The demo mode can be selected via the navigation menu setup under “Further navigation settings” to demonstrate the navigation functions of the RNS 510 or for self-study. After activating route guidance, you can choose between three demo routes corresponding with the three route options. Once you select one of these route options, the RNS 510 sets off on a virtual route. This means it simulates a journey on the demo route with all displays and functions on the RNS 510. The demo route guidance can only be started when the vehicle is stationary and is cancelled when the vehicle pulls away.S397_080Display and announcement languageOn the RNS 300 and RNS 510, the display is always in the same language as the acoustic navigation announcements. A radio/navigation system normally takes the language from the control unit with display in dash panel insert. The control unit with display in dash panel insert also transmits the so-called “language message” to the CAN data bus that is then evaluated by the RNS, for example. The speech output on the radio/navigation system can also be set or changed manually regardless of the CAN message from the control unit with display in dash panel insert. If the language message is not received by the radio/ navigation system, the last set language remains active. When used for the first time, the preset language is English.Switch-off timeIf you turn off the ignition while the radio/navigation system is switched on or switch on the system without “Ignition on”, the RNS will remain active for a further 30 minutes and then automatically switch off. This function was previously called hour mode or hour logic. The switch-off time of 30 minutes also applies to the simple Volkswagen radio models from model year 2008.56Special information for use of the radio/navigation systemsRNS 510Copying navigation data to the navigation partition of the internal hard drive Only the content of one navigation DVD can be copied to the hard drive built into the RNS 510 even though the partition could actually hold a larger quantity of data (max. 10Gb) than the 4.7Gb on a single-layer DVD. Therefore it is not possible, for example, to save both the data from the western European navigation DVD and the eastern European DVD at the same time on the internal hard drive. The reason for this restriction to the content of one DVD is that a larger data quantity can be expected in the future in particular for countries with large road networks. For example, the navigation DVD for the USA is already a dual-layer DVD with a data capacity of approx. 8.5Gb.S397_111New navigation DVD. "Continue" stops the guidance and cancels destination entry.Do you want to save the DVD database in the system for future use or do you just want to use the database temporarily? Temporary SaveS397_112If the data from one navigation DVD has been s aved on the navigation partition and you insert a DVD for another region or a different version of the same navigation DVD, the system will ask you in a selection window whether the stored data should be overwritten or the inserted DVD should be used tempo