TECHNICAL DOCUMENTATION

SSP 414 4MOTION with Four-wheel Drive Coupling Generation IV

PDFEN28 pages2 MB
SSP 414 4MOTION with Four-wheel Drive Coupling Generation IV - PDF cover

This PDF is currently unavailable.

Read document text
Service TrainingSelf-study Programme 4144MOTION with Four-wheel Drive Coupling Generation IVDesign and Function Volkswagen has been using Haldex couplings for its 4MOTION four-wheel drive system since 1998. The new generation of four-wheel drive coupling is being used for the first time in the Tiguan.The new four-wheel drive coupling exclusively uses electronic control so that any amount of torque can be built up at any time regardless of slip. The distribution of the drive power to the axles is variable and depends on the driving situation. The new four-wheel coupling in the 4MOTION system can thus react ideally and extremely fast to all driving situations.S414_002You will find information on the previous generations of the Haldex couplings in self-study programmes: ● SSP206 – Four-Wheel Drive with Haldex Coupling ● SSP333 – 4MOTION with Haldex Coupling, year of models 2004NEWImportant NoteThe self-study programme shows the design and function of new developments. The contents will not be updated.For current testing, adjustment and repair instructions, refer to the relevant service literature.2 ContentsIn Brief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Recap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 The new Generation IV four-wheel coupling . . . . . . . . . . . . . . . . . . . . . . . . . 5 4MOTION Drive Train . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Overview of design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Bevel gear system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Propshaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Rear-axle differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Four-wheel drive coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Four-wheel Drive Coupling in Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Mechanical assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Electrohydraulic assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Four-wheel drive control unit J492 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Regulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Driving situations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 System overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Functional Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Test Yourself . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 In BriefRecapIn 1998, the 4MOTION drive system replaced the Synchro four-wheel drive system at Volkswagen. Whilst the Synchro system used a Visco coupling, 4MOTION used a four-wheel drive coupling from Haldex for the first time. The four-wheel drive can be controlled electronically using this electrohydraulic clutch plate. In addition to slip, the control unit can take driving dynamic states like cornering, speed, deceleration and acceleration into account.First generation Haldex couplingHaldex coupling from model year 2004, generation IIS414_003S414_004The third-generation Haldex coupling was not used by Volkswagen.How the Haldex coupling worksOn the first two generations of the Haldex couplings, a speed difference between the front and rear axles was used to create a pumping effect that builds up working oil pressure using a lifting plate, actuating rollers and two parallel lifting pistons. This pressure pushes the clutch plate set together via a working piston. The level of the pressure applied determines how much drive torque is transferred. Suction and pressure valves, an electronically controlled valve and a control unit regulate the pressure on the clutch plates.4 Fourth-generation four-wheel drive couplingIn principle, power is transmitted via the clutch plate set on the fourth generation of the four-wheel drive coupling in the same way as the previous Haldex models. One new feature is the pressure being built up with an electric pump. The four-wheel drive control unit J492 determines the torque to be transferred by controlling the coupling opening control valve N373. Speed differences between the front and rear axle are no longer required to activate the four-wheel drive coupling.Technical features● ● ● ●Electrohydraulically controlled clutch plate Integrated in the rear axle drive Simplified hydraulic system Optimised, demand-regulated pump controlS414_005Advantages●● ● ●Coupling control not dependent on driving situation Fast moment build-up by means of pre-control Permanent rear-axle drive capacity Fully compatible with traction control systems (e.g. ESP, ABS)5 4MOTION Power TrainOverview of designThe front wheels are normally driven via the front axle differential. At the same time, the torque is transferred from this differential to the propshaft via a flanged bevel gear system. This is connected to the four-wheel drive coupling. Depending on how wide the four-wheel drive coupling is open, a level of torque determined by the driving situation is transferred to the rear axle drive.EngineBevel gear systemPropshaftRear axle drive Four-wheel drive coupling Gearbox Front axle differential Rear axle differentialS414_0076 Bevel gear systemThe bevel gear system raises the speed by a ratio of 1.6. This allows a shaft with a smaller diameter to be used because it has to transfer less torque. The engine speed is then reduced again by the same ratio in the rear axle drive.Output to right-hand wheelOutput to propshaft Input from gearbox and output to left-hand wheel S414_008Power transmissionThe power is transferred from the spur gear via the differential cage, the hollow shaft with crown wheel and the drive pinion to the propshaft.Differential cage From gearboxHollow shaftOutput to left-hand wheelOutput to right-hand wheelSpur gearDrive pinionCrown wheelOutput to propshaftS414_0097 4MOTION Power TrainPropshaftThe propshaft is made up of two parts. It is joined by a centre joint. Flexible couplings are fitted to connect the transfer case and the four-wheel drive coupling. A torsion damper is fitted on the outside of the rear flexible coupling (not separable). This reduces the transfer of engine vibrations to the body via the rear-axle gearbox.Flexible couplingCentre joint Flexible coupling with torsion damperDirection of travel S414_010Rear flexible couplingThe rear-axle differential and the propshaft are balanced. For this reason, there is no need to balance the drive train in the vehicle.Centre jointThe centre joint is press-fitted and therefore cannot be removed. Volkswagen have managed to make the assembly more compact and lighter. The rubber boot is also better protected.Rubber boot Torsion damperS414_011No balancing necessary S414_0128 Rear axle driveThe four-wheel drive coupling is integrated into the rear-axle drive.Crown wheel Drive pinion for rear-axle differentialClutch plate set for four-wheel drive couplingRear axle differentialOil reservoir for four-wheel drive coupling Drive shaft Four-wheel drive control unit J492 S414_0139 4MOTION Power TrainFour-wheel drive couplingTaskThe drive torque transferred to the rear axle is controlled via the four-wheel drive coupling between the front and rear axle drive. It transfers the necessary drive torque to the rear axle depending on how wide the coupling is opened.DesignThe four-wheel drive coupling consists of the following components:Clutch plate set AccumulatorOil filterHaldex coupling pump V181Coupling opening control valve N373S414_014Four-wheel drive control unit J492Components in oil system:Clutch PlateCoupling opening control valve N373Four-wheel drive control unit J492 Accumulator Haldex coupling pump V181 S414_06410 Four-wheel Drive Coupling in DetailOverviewThe individual component groups are shown to clarify the function:Mechanical assemblyS414_015Belleville washerNeedle bearingThrust washer Working piston Needle bearing Drive hubClutch plate setCoupling cageElectrohydraulic assembly and four-wheel drive control unit J492Coupling opening control valve N373 Four-wheel drive control unit J492 S414_040AccumulatorHaldex coupling pump V181Oil filter11 Four-wheel Drive Coupling in DetailMechanical assemblyThe following subassemblies make up the mechanical assembly: the clutch plate, the working piston and the belleville washer. This whole assembly forms the frictional connection between the front and rear axle. If pressure is applied to the working piston, the clutch plate set is pressed together. In this way, a different torque (up to 2400Nm) can be transferred depending on the clamping load.Clutch plateThe clutch plate consists of the drive hub, the clutch plate set and coupling cage. Drive hub The drive hub is driven by the propshaft via the flange.S414_041From propshaftDrive hubS414_051Clutch plate setSteel plateThe clutch plate set consists of friction plates and steel plates and one thrust washer at the front and one at the rear. The friction plates have inside teeth and are fitted on the drive hub. The steel plates are connected to the coupling cage by their outer teeth. The number of blades depends on the type of vehicle.Friction plateS414_042Thrust washerClutch plate setS414_05212 Coupling cageDrive pinion for rear axleS414_043The coupling cage is connected to the drive pinion for the rear axle via splines and transfers the drive torque to the rear axle.S414_053 Coupling cageSplineWorking pistonDesign The working piston is an annular piston. Task When the coupling is operated, the pressure of the working piston is passed onto the clutch pate set via a needle bearing. The working piston does not rotate. The clutch plate set rotates at the drive speed, however.Needle bearingS414_054Working piston S414_044Oil pressure sideBelleville washerBelleville washerThe belleville washer is on the oil pressure side of the working piston. Task It pre-tensions the mechanism thus pushing the working piston. This removes the play from the clutch plate set and the needle bearings.S414_055S414_04513 Four-wheel Drive Coupling in DetailElectrohydraulic assemblyThe electrohydraulic assembly consists of the Haldex coupling pump V181, the oil filter, the accumulator and the coupling opening control valve N373.Haldex coupling pump V181The Haldex coupling pump V181 is a reciprocating pump and is mounted at the lower section of the fourwheel drive coupling. It produces the oil pressure. The accumulator in the oil system is filled regularly. It is operated on demand by the four-wheel drive control unit J492.S414_046FunctionOil is drawn inEach bore in the cylinder housing has a piston with a guide pin and a return spring. Due to an angled ball bearing, the piston and guide pin make lifting movements when the cylinder housing rotates so that oil is drawn in at the bottom and after a 180° turn arrives at the top compressed.Oil is delivered in compressed form S414_022Cylinder housing To accumulator Ball bearingEffect upon failurePistonIf the Haldex coupling pump V181 fails, it is no longer possible to build up pressure. Torque is no longer transferred to the rear axle.Guide pin Return spring From oil reservoirOil filterThe oil filter is a maintenance-free fleece filter. A check valve has been integrated into the oil filter housing and prevents the oil pressure acting on the Haldex coupling pump V181 being released.14 AccumulatorThe accumulator is very compact, consists of three parallel acting springs and is mounted on the top of the coupling. It adjusts the oil pressure with spring force and maintains it at a level of 30bar.System pressure-free:S414_016The accumulator springs are not tensioned.Return to oil reservoirFrom pump and to valveSystem with working pressure:Pressure pistonThe pressure chamber is filled by the pump. This pushes back the pressure piston and the springs are tensioned.S414_017 Return channels Pressure chamberS414_018If the pressure is above 30bar and thus too high, the return channels are opened and the pressure is released back to the oil reservoir.To oil reservoir15 Four-wheel Drive Coupling in DetailCoupling opening control valve N373Task The coupling opening control valve N373 controls the working pressure that is passed onto the working piston. This rises proportionally to the current. A precisely defined pressure is generated when a different current is applied to the valve.Spring Needle To oil reservoir Bore Regulating chamber Control pistonTo working piston From accumulatorSolenoidFunction An oil pressure of 30bar is built up by the Haldex coupling pump V181 and the accumulator. (1) When the solenoid is energised, a magnetic force is produced depending on the size of the current applied. It moves the control piston upwards, opens the flow-through and the working pressure is built up. (2) Once the required working pressure has been reached, the equilibrium of forces is formed as described below so that the flow-through is closed and the working pressure is maintained. (3)Magnet coreConnector S414_019S414_0201 Oil pressure of 30bar2 Working pressure is built up3 Flow closed, working pressure is maintainedThe working pressure is applied to the working piston and in the regulating chamber of the control piston. The pressure in the regulating chamber acts in the same direction as the return force of the spring and supports this as a counterforce to the magnetic power. An equilibrium of forces is created. When fully energised, the lower inlet stays open and the total oil pressure is used as a working pressure.S414_021Spring force Regulating chamber + Pressure force = Magnetic force16 If the coupling is to be opened, the solenoid is no longer energised, the control piston returns to the starting position and the pressure is released back to the oil reservoir.Release of working pressure to oil reservoirEffect upon failureS414_023If the coupling opening control valve N373 fails, fourwheel drive is no longer possible.Four-wheel drive control unit J492Task The control unit controls the pump running times and the coupling opening control valve N373. The pressure level is exclusively determined by the position of the valve. There is a temperature sensor of the control unit circuit board whose measured values indicate the oil temperature. The four-wheel drive control unit J492 is incorporated in the drive CAN data bus. This allows it to control the system precisely with just one sensor. The control unit uses the data on the driving situation to determine the current pressure requirement so that the opening size and the transmission of the four-wheel drive coupling is tuned ideally to the situation. If there is ESP or ABS intervention, the ABS control unit J104 uses the four-wheel drive control unit J492 to determine how far the four-wheel drive coupling is opened.Effect upon failure The working pressure is not built up because the coupling opening control valve N373 can no longer be controlled. The coupling is opened and the rear axle is therefore no longer driven.S414_02417 RegulationOil systemThe electrohydraulic components build up the oil pressure and thus control the clamping pressure on the clutch plate.Working pistonCoupling opening control valve N373 Belleville washerAccumulator ReturnClutch plateOil filterFour-wheel drive control unit J492Strainer Oil reservoirHaldex coupling pump V181 S414_027System pressure-free:The diagram shows the system in pressure-free state. Once the engine has been turned off and only the ignition is turned on, the four-wheel drive control unit J492 is activated, but pressure is not built up. The coupling opening control valve N373 is open when not energised.A pressure-free system is required in the following situations:ExamplesTowing Roller dynamometerS414_030S414_031As a small basic moment is applied by the belleville washer, a speed of 50km/h and a distance of 50km may not be exceeded when the vehicle is towed with a raised axle.18 Pressure build-up when engine is startedWhen the engine is started, the Haldex coupling pump V181 is activated. The pump is activated once an engine speed of 400rpm is reached. It transports oil via the filter to the accumulator until a pressure of 30bar is reached in the oil system. The coupling opening control valve N373 is closed by the four-wheel drive control unit J492 so that the working pressure is passed onto the working piston and the clutch plate set is pressed together.Working piston 0– 30bar Coupling opening control valve N373 Belleville washer Oil pressure 30 barAccumulator ReturnClutch plateOil filterFour-wheel drive control unit J492Strainer Oil reservoir S414_028Haldex coupling pump V181Pulling awayWhen you pull away and accelerate, the full rear axle drive torque is immediately available.System while drivingIn all driving situations, the pressure between the pump and valve is held at a constant pressure of 30bar by the accumulator. The working pressure is exclusively controlled via the coupling opening control valve N373 and can set the pressure applied to the working piston as required. This working pressure can be 0% e.g. when braking and 100% e.g. when accelerating.Controlled working pressureS414_02919 RegulationDriving situationsS414_032Pulling away or acceleratingA high drive torque is required at the rear axle. The valve closes completely and the clamping pressure can reach maximum.Rear axle drive torque100%S414_056Control range 0% Pulling away/acceleratingFast drivingOnly a low torque is required at the rear axle. The clamping pressure is controlled as required (control range).100% S414_057Control range S414_033 Fast driving0%BrakingWhen braking, no torque should be transferred to the rear axle. Therefore the valve is opened and the pressure on the working piston is released. The coupling opens.100% S414_058S414_049 0% BrakingStoppingThe coupling is open while the vehicle is braked. Once the vehicle is stationary, the pre-control uses the accelerator pedal position signal. When pulling away, the pressure is built up again and the full torque is available again.100% S414_0590% StoppingS414_034ParkingOnly a low torque is transferred during parking. The drive train is not under load. The coupling is controlled as required (control range).100% S414_057Control range0% ParkingS414_03520 Critical driving situationsDriving on slippery roadsThe working pressure is controlled according to requirements. Signals also come from the ABS control unit J104 that recognises slip through the speed sensors and calculates the required traction.S414_036Rear axle drive torqueS414_060 Control range100%ESP or ABS interventionIf a traction control system is activated, the opening of the coupling is controlled indirectly by the ABS control unit J104. For example, the coupling can be fully opened for ABS intervention and can be closed for ESP intervention.0% Driving on slippery road or ESP or ABS interventionPulling away with slip (on ice or snow)The four-wheel drive coupling is closed if both wheels on the front axle spin. The rear axle takes over drive.S414_038 S414_065If just one wheel on the front axle spins, the electronic differential lock (EDL) will intervene by braking the spinning wheel and thus increasing the driving power of the other wheel. At the same time, the four-wheel drive coupling is closed and a large part of the driving power is transferred to the rear axle.S414_06221 System overviewSensors ActuatorsG28 Engine speed senderN373 Coupling opening control valve G79 Accelerator pedal position sender J623 Engine control unitG44-G47 Speed sensorsJ104 ABS control unit J492 Four-wheel drive control unitPowertrain CAN data busF Brake light switchV181 Haldex coupling pumpJ540 Electromechanical parking brake control unit *J533 Data bus diagnostic interfaceG85 Steering angle senderS414_026* A sensor cluster is integrated in the electromechanical parking brake control unit. It contains the lateral acceleration sender, the longitudinal acceleration sender and the yaw rate sender.22 Functional DiagramTerminal 30 J540J104J623S G85N373 V181 J492Terminal 31S414_047G85 J104 J492 J540 J623 N373Steering angle sender ABS control unit Four-wheel drive control unit Control unit for electromechanical parking brake Engine control unit Coupling opening control valveColour coding Positive Earth CAN data bus lineS V181Fuse Haldex coupling pump23 ServiceDiagnosisDiagnosis functionsThe following diagnosis functions are possible with the VAS diagnosis testers: Identification of control units Query fault memory Delete fault memory Read data blocks Control element test Basic setting Customisation Code VAS 5051BThe individual diagnosis functions are available via the guided fault finding system or the guided functions.S414_066VAS 5052VAS 5053S414_068S414_06724 Testing individual componentsIndividual component tests can be called up via the function and component selection in the guided fault finding system.Guided Fault Finding Function / Component Selection Select function or component + Running gear + All-wheel drive with Haldex clutch (4th generation) + 01 - On Board Diagnostic (OBD) capable systems + Electrical components Sender for accelerator pedal position -G79J492 - All-Wheel Drive Control Module Haldex Clutch Control Valve -N373Haldex Clutch Pump -V181VOLKSWAGENOperating modeGo toPrintS414_069Four-wheel drive control unit J492The four-wheel drive control unit J492 uses address word 22 for self-diagnosis.- The four-wheel drive coupling can be replaced separately. There is no need for complicated adjustment work after replacement as the drive pinion belongs to the rear-axle differential and is not replaced. - The high-performance oil was specially developed for the requirements of the fourth generation four-wheel drive coupling.25 Test Yourself1. What is the difference between the fourth generation of the four-wheel drive coupling and the previous models? a) The new four-wheel drive coupling is controlled electrohydraulically. Speed differences between the front and rear axle are no longer required to activate the four-wheel drive coupling. b) The new four-wheel drive coupling uses electronically controlled valves to control the working pressure acting on the clutch plate. c) Unlike the previous models, the fourth generation of the four-wheel drive coupling can also take drivingdynamic states like cornering, speed, acceleration and deceleration into account.2.What is the task of the accumulator in the oil system of the four-wheel drive coupling? a) The accumulator regulates the pressure applied by the working piston to the clutch plate. b) A pilot pressure of 3bar is built up by the accumulator. c) The accumulator is filled by the Haldex coupling pump V181 and ensures a constant oil pressure of 30bar in front of the coupling opening control valve N373.3.How does the coupling opening control valve N373 work? a) When the solenoid for the coupling opening control valve N373 is energised, the control piston starts moving and the working pressure for the working piston is built up. As soon as the required pressure is reached, the flow is closed and the working pressure is maintained. b) If the coupling opening control valve N373 is energised, the line to the working piston is opened completely and the working pressure of 30bar is built up on the working piston. c) If the solenoid for the coupling opening control valve N373 is not energised, the control piston is in rest position and the line to the oil reservoir is open so that the working pressure is released. d) The working pressure acting on the working piston rises proportionally to the current that is applied to the solenoid for the coupling opening control valve N373.26 4.How is drive torque transferred by the four-wheel drive coupling when the vehicle has to stop at a red light? a) If the vehicle has to stop at a red light, the coupling is immediately opened fully. b) If the driver brakes before the traffic lights, the clutch plate is opened fully. When the vehicle pulls away, the pre-control uses the signal for the accelerator pedal position to build up the working pressure again via the coupling opening control valve N373. c) If the vehicle is standing at traffic lights, the drive torque at the rear axle is regulated as required depending on the engine speed.1. a) 2. c) 3. a), c), d) 4. b) Answers:27 414© VOLKSWAGEN AG, Wolfsburg All rights and rights to make technical alterations reserved. 000.2812.09.20 Technical status 10.2007 Volkswagen AG Service Training VSQ-1 Brieffach 1995 38436 Wolfsburg❀ This paper was manufactured from pulp that was bleached without the use of chlorine.