TECHNICAL DOCUMENTATION
SSP 487 The Beetle 2012

This PDF is currently unavailable.
Read document text
Service TrainingSelf-study programme 487The Beetle 2012The Beetle 2012 will appear initially in Mexico, the USA and Canada. It continues the success story of its predecessor, the New Beetle. The Beetle 2012 combines modern design with contemporary technology and great luxury. With its balance between technical equipment and luxury features, is equipped for the most varied markets and customer demands.S487_002Features of the new Beetle which are to be emphasised include • an elegant and sporty design with, for example, new front and rear end with newly designed headlights and tail lights and the new lowered and flatter roof line a high standard of quality very good handling • • • optimised body design increased vehicle width and length for substantially enlarged and more generous interior new, optimised running gear with very good dynamics• •The illustrations of the Beetle 2012 in this self-study programme show combinations of equipment components which do not reflect possible equipment variations in every case – the illustrations serve only as examples. You can find detailed information on equipment variations in the relevant sales literature.The self-study programme presents the design and function of new developments! The content will not be updated.Current testing, setting and repair instructions can be found in the provided service literature.Important note2ContentsIn brief. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Occupant protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Gearboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Running gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Electrical system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Air conditioning system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Radio, telephone and navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 553In briefWhere will the Beetle 2012 be produced?The Beetle 2012 will be built at Volkswagen’s Puebla plant in Mexico. It is the successor to the previous model, the New Beetle.The Puebla plantThe Puebla plant began operation in 1964 with the production of the VW Beetle. The plant has been continuously expanded and modernised. Presently, Puebla employs a workforce of about 15,000. Production currently includes • • • the Jetta the Golf Estate (marketed as the Golf Wagon, Jetta Estate or Jetta Wagon in some countries) the BeetleS487_014State-of-the-art equipment consistently ensures a high standard of quality at the Pueblo plant. The intensive involvement of the engineers in Puebla during the preparatory phase and the development as well as in the preparations for actual production ensured the achievement of high product quality. The Puebla plant is one of Volkswagen AG's leading production sites. The Beetle 2012 will be produced on a modified version of the production line already used for its predecessor.4The historical roots of the Beetle 2012The Beetle 2012 is a reference to the still-loved Volkswagen Beetle, which enjoyed success throughout the world. The first generation of the New Beetle successfully continued making history since 1998 – but now on the current A4 platform. The New Beetle was produced in numerous versions as both a hardtop and, since 2003, a convertible. The Beetle 2012 continued this development with a completely revised and optimised vehicle design – but it remains unmistakeably a genuine Beetle.The Beetle – the roots of the Beetle 20121998 – the New Beetle: the start of the model range2003 – The New Beetle cabriolet2012 – The 2nd generation: the Beetle 2012S487_0065In briefThe Beetle 2012The Beetle 2012 pursues the basic concept which was successful with its predecessor – but it has been modified to satisfy the current, increased demands.•New interior with Beetle design•New dash panel with Beetle design•New steering wheel design – exclusively for the Beetle•New headlight design•Side marker light on wing•Optimised front axle with steel subframe and suspension links•Electronic stabilisation programme (ESP) MK 60•Steering – hydraulic or electromechanical depending on equipment6•Optional „Keyless Access“ (Kessy) locking and start system – starting and stopping with start button•Optional Sound System•New tail light design•Rear axle as torsion beam trailing arm or fourlink suspension depending on equipmentS487_005•Significantly enhanced vehicle dynamics due to larger tyres and wider track front and rear•Manual air conditioning system7In briefTechnical dataBeetle 20128782537 4278863S487_01514861578 1808 1975 S487_0161544 S487_017The dimensions given in the pictures are in mm.Length Width Width incl. door mirrors Height Wheelbase 4278 mm 1808 mm 1975 mm 1486 mm 2537 mm Track width at front Track width at rear Minimum kerb weight Maximum gross vehicle weight Drag coefficient*1578 mm 1544 mm 1332 kg* 1750 kg* 0,366 cwmay vary according to model equipmentThe minimum kerb weight and maximum permitted gross vehicle weight apply to a vehicle with standard equipment and a full fuel tank, without driver. The stated weights are an example and refer to a vehicle with a 2.5 l, 125 kW engine and 5-speed manual transmission.81281165913384104942403727475S487_018672 7082101**S487_096960S487_019The dimensions given in the pictures are in mm.Front headroom Rear headroom Interior length Width at shoulder height, driver/front passenger Width at shoulder height, rear bench Height of load sill 1044 mm* 942 mm* 1659 mm 1404 mm Tank capacity 1245 mm 708 mm Boot volume* **Cargo area height Height of tailgate with spoiler** Through-load width between wheel housings672 mm 2101 mm** 960 mm 55 litres 284 litresmay vary according to model equipment the height of versions without a spoiler is 2048 mm9BodyBody structureThe body of the Beetle 2012 is a steel monocoque construction which is primarily characterised by the following two main features. • • an extremely robust and safe passenger compartment lightweight steel construction throughoutThese two qualities were achieved through • • the use of high-tensile, hot-formed and formhardened steels along crash load paths and material quality appropriate to the loads (in regard to yield strengths) and material thickness for the rest of the body structureA large number of common parts could be used in the floor group of the body. The upper body structure has been newly developed. To realise the shape of the new Beetle's wing based on its ancestor, the old Beetle, the rear wing is attached as a separate component. It is designed to be bolted on, as is usual for the front wing.Torsional rigiditySide impact barSide impact tubeThe joining concept employed for the Beetle 2012 attains a very high degree of static torsional rigidity in the body.Crash reinforcementsA side impact tube is fitted in the shoulder of each door as reinforcement in the event of a crash. In addition, the doors are equipped with a side impact bar.S487_02010Strengths of steel sheets Yield strength Rp 0,2 220 - 260 MPa 280 - 340 MPa 360 - 420 MPa S487_021 420 - 1000 MPa 1000 MPa high tensile, hot formed, form hardenedJoining techniquesThe following techniques are used to join components of the body structure• • • •Bonding Crimping MIG soldering (MAG welding)• • •Spot welding Laser welding Laser soldering11BodyBody featuresBonnetThe structure of the bonnet is designed to offer optimal pedestrian protection. Depending on the engine, noise insulation mats are fitted on the inside of the bonnet.Front seatsThe front seats have a manually operated knob on the hinge to adjust the backrest angle. The seats also provide an easy-entry function as standard. Depending on the equipment, a manually adjustable two-way lumbar support may be installed. The front passenger seat features a capacitive occupancy detection function.Space conceptWith its light and spacious interior, the Beetle's space concept offers a very good combination of emotionality and practicality. The interior design continues the design theme of the exterior and its distinctive attention to detail creates very good ambience. A broad and thought-out system of compartments enhances its utility. In conjunction with the new roofline, headroom was improved and a more comfortable seating position was provided in the rear.HeadlightsEither halogen or optional bi-xenon headlights are used in the Beetle 2012.DoorsThe frameless doors of the Beetle 2012 have the basic structure as those of the Scirocco 2009. More about frameless doors can be found in self-study programme No. 417, "The Passat CC 2009".Panoramic sliding/tilting sunroofThe Beetle 2012 can be optionally equipped with a panoramic sliding/tilting sunroof.12Rear bench seatThe rear bench has a fixed, one-piece seat, and the rear backrest is split 50-50. Each half of the rear backrest can be released at the top and individually folded down forward. The rear seats are equipped with a child restraint system (see page 21).Luggage compartment lidThe Beetle has a large rear lid of sheet metal, reaching to the end of the roof and has gas-filled springs on the left and right sides. It has an emergency release on the inside near the bottom.S487_030Rear windowThe aerials for radio reception are integrated into the rear window.Rear spoilerThe Beetle may be fitted with a rear spoiler depending on equipment. The spoiler guarantees very good road holding even at higher speeds.S487_028Tail lightThe one-piece tail lights have clear glass housings. They possess a homogeneous, c-shaped tail and brake light which is supplemented with a bull's-eye light in the centre in typical Volkswagen style.13BodyLightsHeadlightsThe Beetle 2012 may be equipped with either Halogen or bi-xenon headlights. The turn signals and fog lights are fitted in the bumper. Static cornering lights are integrated in the fog lights. The system is supplemented by yellow side marker lights located on the left and right sides along the front edge of the front wheel arches.Beetle with a halogen headlight (example)Turn signal (H 21 W) Fog light with cornering light (H8 35W)S487_077 Side marker light (3 W)Halogen headlightsHalogen headlights are fitted as standard in the Beetle 2012. The headlight unit has an HB2 bulb for both dipped beam and main beam. Daytime running lights and side lights are implemented using a separate lamp.Daytime running light and side light (W 21/5 W)Dipped beam and main beam headlight (HB2 60/55 W)S487_07214Bi-Xenon headlightsBi-xenon headlights with LED daytime running lights may be fitted optionally. When dimmed, they serve as side lights. Bi-xenon means that the dipped headlight and high beam are integrated into one module. The bi-xenon module is equipped with newly developed 25 W mercury-free xenon gas-discharge lamps. Fifteen separate LEDs with lenses are fitted in a cshaped arc around the headlight to provide daytime driving lights and side lights. The single LED located next to the bi-xenon module is also used for the daytime driving light and side light. The bi-Xenon headlights are equipped with dynamic headlight range adjustment.Daytime running light (LED 7.3 W) or dimmed as side light (LED 3.4 W)S487_052 Dipped beam and main beam headlight (Xenon 25 W)Brake light and tail light (W 21/5 W)Reversing light (W 16 W)Third brake light (LED 1.3 W)Tail lightsThe one-piece tail lights have clear glass housings. They possess a homogeneous, c-shaped tail and brake light which is completed with a bull's-eye light in the centre in typical Volkswagen style. The system is supplemented by a red LED side marker light in the tail light unit on the left and right sides and by a third brake light on the rear lid. Red reflectors are fitted on the left and right sides of the rear bumper.S487_053 Reflector Turn signal (P 21 W)Side marker light (red) – LED15BodyInterior conceptThe new coupe body was created so that the demands on both design and usable space were satisfied over a broad range. The interior and its equipment achieve a very good synthesis between a car for daily use and one for individual demands with a very special "Beetle design". The dash panel of the Beetle 2012, for example, demonstrates this clearly. In addition to black lacquer and carbon fibre-look plastic trim, the Beetle optionally offers a dash panel in a "design" package in the respective body colour. Portions of the steering wheel or, for example, the upper interior door shoulder, are finished in the body colour. The optionally available background lighting can also be mentioned here as a special highlight.Sample interior view of "design" package equipmentS487_081The practicality of the Beetle 2012 luggage compartment has been significantly improved over the New Beetle. The luggage compartment is distinguished by • • a wider aperture and improved storage capacity – from 96 to 310 litres.Example of improved luggage compartment usabilityIt is possible to load even bulky items easily through the large rear lid which extends all the way to the rear edge of the roof. The luggage compartment may be further extended by folding down the 50-50 split rear backrests.S487_02916Background lightingDepending on the equipment, background lighting may be fitted in the Beetle which can be switched on when the driving lights are switched on. Background lighting consists of LED modules having optic conductors which illuminate certain interior areas. There are two versions of background lighting. • • Basic background lighting – white only in the shoulder of the driver and front passenger door Three-colour background lighting – switches among white, blue and red, fitted in the shoulder of and around the speakers in the driver and front passenger doorsS487_082Background lighting further emphasises the exclusive Beetle design.The figure shows as an example the setting for blue in the three-colour background lighting.How it worksThe background lighting is operated by means of a switch to the left of the steering wheel. The background lighting may be switched on or off and the colour may be selected by turning the middle ring switch.S487_088Control – ring switch for background lighting17BodyPanoramic sliding/tilting sunroofThe Beetle 2012 can be optionally equipped with an electric panoramic sliding/tilting sunroof. This roof is a further development of the panoramic sliding/tilting sunroof from the Polo and has been adapted to the Beetle's design.The area of the roof surrounding the sunroof was integrated into the panoramic sunroof module. It is designed as a black, high-gloss plastic roof trim which has been made scratch resistant through a special painting process. Thus, the panoramic sliding/tilting sunroof communicates an overall visually harmonious design of the area extending to the rear lid – and what's more, it supports the dynamic character of the Beetle 2012. Compared to the predecessor's sunroof, the glass area of the new panoramic sliding/tilting sunroof is about 80 % greater. The light penetration area (corresponds to the cutout in the moulded headliner) increases by about 90 %.S487_026For information on operating the electric panoramic sliding/tilting sunroof, please refer to the owner's manual.Thermal insulationThe glass sunroof is tinted to contribute to the insulation. Heat insulation is achieved through the following proportions of reflection. • • • Reflection of 99 % of UV radiation Reflection of 92 % of heat radiation Reflection of 90 % of visible light radiationFitting the roofThe panoramic sliding/tilting sunroof is bonded to the roof, thus contributing a significant share to the rigid design of the body.Bonded front transverse seamBonded circular seamThe panoramic sliding/tilting sunroof satisfies the legal requirements for pinch protection.S487_097 Bonded rear transverse seam18Component overviewTrim – right Trim – leftGlass panel Roof trim (Plastic) Outer seal Springs for raising wind deflector Sliding/tilting mechanism with Bowden cables – right Wind deflectorSliding/tilting mechanism with Bowden cables – leftSecuring bracket Assembly frame (Plastic) Transverse reinforcement Sun roller blind (retracted) Electric driveGuide rail – rightGuide rail – left Cover for sun roller blind – lower S487_027Tilt mechanism with sunroof – fitted in guide rails – in extended position Sliding/tilting mechanism with Bowden cables – rightSliding/tilting mechanism with Bowden cables – left Guide rail – right Glass panel S487_100 Guide rail – left19Occupant ProtectionSafety equipmentThe Beetle 2012 is fitted with the following safety equipment.• •• •Single-stage driver airbag Front passenger airbag – single-stage for Mexico, Front passenger airbag – two-stage for USA and Canada Side airbags for head and thorax in front Belt tensioners and belt force limiters in front•The sensor concept for the airbag system differs according to the market. - For Mexico, the control unit for frontal crash detection is integrated in the airbag control unit. A side crash sensor is located in each door. - The sensor concept for the airbag systems for the USA and Canada includes two frontal crash sensors, one each fitted on the left and right sides of the front end. A side crash sensor is located in each door.Eye for attaching top tether strap.•Top Tether - The Top Tether system serves to secure a child seat more firmly. In this connection, an additional belt at the top of the child seat is attached to the retainer on the respective half of the rear backrest.S487_03220•Capacitive front passenger side seat occupied recognition - In the USA and Canada, the capacitive seat occupancy detection system already used in the Jetta 2011 is being fitted for detecting seat occupation. It uses a sensory system with a capacitive operating principle. The figure illustrates an example of a standard seat with a sensor mat. (Seat occupancy detection for the deactivation of the front passenger airbag will begin in Mexico with the 2012 product upgrade.)Sensor mat (seat occupied sensor, front passenger side G128) Seat occupied recognition control unit J706Electrical connection to J706Electrical connection to J234S487_079The sensor system consists of a sensor mat with an electrical connecting cable to the seat occupied recognition control unit J706. Sensor information is processed in control unit J706 and made available to the airbag control unit J234. If the system detects that the front passenger seat is vacant or occupied by a small child in a child seat, the front passenger airbag is switched off. When the seat is again occupied by an adult, the front passenger airbag is switched on again. When the front passenger airbag is switched off, the indicator lamp "PASSENGER AIRBAG off" lights up in the centre console (for detailed information, please refer to the owner's manual).S487_031•Rear head restraints Mexico – retractable L-shaped head restraints USA and Canada – retractable large head restraints•Child restraint system - The rear seats are equipped with LATCH* lower anchor bars – the designation of child restraint systems differs from country to country*.*Mexico and USA = LATCH (lower anchors and tethers for children); in Canada, the system is called lower universal anchorages.Mexico S487_080 USA / Canada21EnginesThe 2.0 l, 147 kW TSI engineThe 2.0 l TSI engine belongs to the EA888 inline engine family. It is nearly identical in design to the 1.8 l TSI engine.Technical features• • • • • The larger displacement has been achieved with modified pistons, connecting rods and crankshaft. The turbocharger pressure actuator can be exchanged. Volumetric flow-controlled external gear oil pump Two balancer shafts Friction-optimised piston rings and cylinder honingS487_033You will find further information about this engine in self-study programme no. 401 "1.8 l TFSI 16v 118 kW engine".Technical dataEngine code Type Type Bore Stroke Valves per cylinder Compression ratio Max. output Max. torque Engine management Fuel Exhaust gas aftertreatment CCZA*/CCTA**/***/CBFA** 4-cylinder inline engine 1984 cm3 82.5 mm 92.8 mm 4 147 kW from 5100 to 6000 rpm 280 Nm from 1700 to 5000 rpm Bosch Motronic MED 17.5.2 Super unleaded RON 95 Broadband Lambda probe upstream of close-coupled starter catalytic converter, steptype Lambda probe downstream of catalytic converter EU5 (Homologation Standard B)/BIN5 (CCTA**/***)/ SULEV (CBFA**) (CCZA*)Torque (Nm)Torque and output diagram360 320 280 240 200 160 120 80 40 0 1000 3000 5000180 160 140 120 100 80 60 40 20 0 7000Exhaust emissions standard* ** ***Engine speed (rpm)S487_039Mexico USA Canada22Output (kW)9.6 : 1The 2.5 l, 125 kW petrol engineThe 2.5 l R5 engine is based on the engine used in the Jetta and Passat for the North American market. It is now offered for the Beetle 2012 as well.Technical features• Regulated oil pump with two pressure stages, externally regulated by engine control unit – for reducing fuel consumption. New oil pressure sensor system to control the oil pump – low oil pressure signal directly to engine control unit, high oil pressure signal via dash panel insert (CAN) SULEV with secondary air system Bin 5, Tier 2 and Tier 1 without secondary air system Harmonious torque and power curves•S487_034• • •••Optimised 5-in-1 exhaust manifold (shell construction) – one lambda probe in exhaust manifold Single-mass flywheel in conjunction with 0A4 gearbox (MQ250)Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Max. output Max. torque Engine management Fuel Exhaust gas aftertreatment Exhaust emissions standard* **Torque and output diagramCBTA**/CBUA**/CCCA* 5-cylinder inline engine 2480 cm3Torque (Nm) 300 250 200 150 100 50 0 1000 3000 5000 150 125 100 75 50 25 0 7000 Output (kW)82.5 mm 92.8 mm 4 9.5 : 1 125 kW at 5700 rpm 240 Nm at 4250 rpm Bosch Motronic MED 17.5.6 Normal unleaded RON 91 Pre and post-catalytic convert lambda probes with constant lambda regulation Bin 5, Tier 2** (CBTA)/SULEV** (CBUA)/Tier 1* (CCCA)Engine speed (rpm)S487_040Mexico USA / Canada23EnginesEngine/gearbox combinationsPetrol engine 5-speed manual gearbox MQ250-5F 0A4 6-speed manual gearbox* MQ350-6F 02Q 6-speed dual clutch gearbox DQ250-6F DSG 02E 6-speed automatic gearbox AQ250-6F 09G2.0 l, 147 kW TSI engine2.5 l, 125 kW petrol engine with 4-valve technologyS487_101 * The 6-speed manual gearbox MQ350-6F (02Q) will be used in the USA and Canada from 2011. The 6-speed manual gearbox MQ350-6F (02Q) will be used in Mexico from 2012.24Power transmissionOverview of dual-clutch gearboxesDual clutch gearboxes Technical features See also6-speed dual clutch gearbox 02E The 6-speed dual clutch gearbox 02E is equipped with a hydraulic dual clutch. It combines the advantages of a manual gearbox, such as high efficiency, robustness and sportiness with the advantages of an automatic gearbox, like great comfort, especially on changing gears.Self-study programme 3086-speed automatic gearbox 09G The 6-speed automatic gearbox 09G is a compact, light, electronically controlled gearbox for transverse mounting. The second generation of this gearbox is used in the Beetle 2012. The main emphasis during the further development of this gearbox was placed on a reduction in fuel consumption and, consequently, in CO2 emissions. As a result of improved damping in the newly developed torque converter, it is possible to drive in second gear efficiently with a closed lock-up clutch. Further, newly developed clutch plate linings and friction-optimised bearings in conjunction with high-lubricity oil contribute significantly to improving efficiency.Self-study programme 309S487_10225Running GearThe running gearThe running gear of the Beetle 2012 has the same design as that of the Jetta 2011. Modified for the Beetle, it offers greater comfort and better dynamics compared to the predecessor model. Compared to the Jetta, the rear axle has been moved 110 mm forward, reducing the wheelbase by this amount. The front track is 30 mm wider, while the rear track is the same as that of the Jetta 2011. The dampers and springs have been newly adapted to the Beetle. The modern front axle possesses a McPherson strut front suspension, familiar from the Golf 2009 and the Jetta 2011. The rear axle comes in two versions depending on the model. • • Torsion beam trailing arm, familiar from the Jetta 2011 and Multi-link suspension, familiar from the Golf 2009 and Jetta 2011•Standard and sport suspension are available.•Electromechanical power steering for the 2.0 l, 147 kW engine•Hydraulic power steering for the 2.5 l, 125 kW engine•Modern McPherson strut front suspension26The sample figure illustrates a Beetle with torsion beam trailing arm suspension.•Brake assist system•Torsion beam trailing arm rear suspension – for models with 2.5 l, 125 kW engine•Four-link suspension – for models with 2.0 l, 147 kW TSI engineS487_041•Floor-mounted accelerator pedal with contactfree senders for the accelerator pedal position•Electronic stabilisation programme based on the MK60 system from Continental Teves27Running GearFront axleThe front axle of the Beetle 2012 is substantially the same as that familiar from the Jetta 2011. The axle has been modified for fitting in the Beetle 2012. • • • Track rods and suspension link have been adapted to the axle position. Anti-roll bar has been adapted to the greater track width. Dampers and springs have been newly adapted.Left suspension link (example)Technical features • • • The assembly carrier (subframe) is made from sheet steel. The suspension link is a single shell made from sheet steel. The rear bonded rubber bush in the suspension link has a vertical axis.Rear bonded rubber mounting (vertical axis)S487_042Coupling rod Wheel bearing housing Track rod Drive shaft Anti-roll barSuspension link Assembly carrier (Subframe) Gearbox pendulum supportFront brakesS487_007Disc brakes have been used on front axle.28Rear axleTorsion beam trailing armThe torsion beam trailing arm was newly developed for the Jetta 2011 and is now fitted in the Beetle 2012 as well. It is used in conjunction with the 2.5 l, 125 kW petrol engine. • • The axle beam a welded construction of formed steel parts. The cross piece is a guide for the axle beam. It is intended to prevent uncontrolled lateral movement of the axle beam. • The steel subframe is bolted at the left and right to the longitudinal members of the body. It increases the stability of the body in this area so that the forces resulting from the movement of the cross piece can be better absorbed.Axle beam Cross pieceSubframe connection to body Bearing bracket (Connection to body)Subframe S487_008 Subframe connection to bodyRear brakeEither drum or disc type rear brakes may be installed on the torsion bar trailing arm depending on equipment and country.Bearing bracket (Connection to body)29Running GearFour-link suspensionFour-link suspension is fitted in conjunction with the 2.0 l, 147 kW TSI engine. Technical features • • The rear axle is a compact four-link design. On each side, the suspension consists of three lateral suspension links (lower link, track rod and upper link) and the trailing arm. • • The subframe is a welded steel component bolted rigidly to body. The wheel bearing housing is adapted to the greater track width It is cast steel with an integral stub axle for supporting the wheel bearing.The four-link suspension construction decouples the longitudinal and transverse forces nearly completely from each other so that the highest degree of driving stability and comfort are attained.Bearing bracket (Connection to body)Lower suspension link Anti-roll barSubframeS487_009Rear brakeTrack rod Upper suspension linkRear disc brakes have been used for the four-link suspension.Trailing arm Wheel bearing housing30The steeringTwo different steering systems are offered for the Beetle 2012.Hydraulic power steeringThe hydraulic power steering is familiar from the Jetta 2011. It is fitted in conjunction with the 2.5 l, 125 kW engine.The force for this steering system is created by a hydraulic steering pump which is fitted directly on the engine. A power steering fluid reservoir is integrated into the oil circuit for power steering.The same steering column used in the Jetta 2011 is fitted.Power steering pumpPower steering fluid reservoirSteering columnS487_010Hydraulic control unit for steering box Steering box31Running GearElectromechanical power steeringThe electromechanical power steering is familiar from the Jetta 2011. It is fitted in conjunction with the 2.0 l, 147 kW engine. The same steering column is fitted for both electromechanical and the hydraulic power steering.Input shaftElectromechanical power steering motor V187 with sender magnet for the rotor position senderIntegrated index sensorPower steering control unit J500 with sensor element for rotor position sensorS487_011The external steering angle sensor G85 has been omitted from this steering system. The sensor information is composed of individual information from • • the integrated index sensor and the rotor sensor. (The sender magnet of the sensor is located on the shaft of the electromechanical power steering motor V187. The sensor element is located in the power steering control unit J500.)The power steering control unit J500 then calculates the vehicle's steering angle using these individual items of information. The calculated steering angle is then used for the internal functions of the steering system and is also provided to other control units as a substitute for the G85 value.32BrakesThe Beetle 2012 is equipped with the same ESP brake system for the markets of Mexico, the USA and Canada. A 10" brake servo is used.S487_043 ESP unitESP systemThe ESP unit MK60 EC is familiar from the Jetta 2011. It is supplied by Continental Teves. The ESP system MK60 EC is distinguished by the following features • • • • Anti-lock brake system (ABS) with electronic brake force distribution (EBD) Traction control system (TCS) Electronic stabilisation programme (ESP) Electronic differential lock (EDL) for 2.5 l, 125 kW engine ESP with electronic limited slip differential (XDL) for 2.0 l 147 kW engine Brake assist systemHydraulic unitControl unit•The electronic stabilisation programme (ESP) permanently active.S487_04533Electrical SystemVehicle electrical systemFitting locations in onboard electrical systemImportant electrical components and their fitting locations in the Beetle 2012 have changed in comparison to its predecessor model. The adjacent figure illustrates selected components and their fitting locations.Plastic housingOnboard supply control unit on the back of a plastic housingElectronics box on left in engine compartment next to batteryRelay carrier on the front of the plastic housing at the topFuse holder on the front of the plastic housing at the bottom34Architecture of the vehicle electrical systemThe Beetle 2012 employs a modified vehicle electrical system with the following features. The platform of the vehicle electrical system is based heavily on that of the Polo 2010. Various components and switches of the convenience system were carried over from the Golf 2009 and adapted to the above-named vehicle electrical system.Converter boxEither of two versions of the vehicle electrical system may be installed depending on equipment (also see network concept). 1. Standard vehicle electrical system – onboard supply control unit J519 with integrated data bus diagnostic interface J533 2. Enhanced vehicle electrical system – onboard supply control unit J519 with external data bus diagnostic interface J533 The onboard supply control unit is fitted beneath the dash panel on the left, on the back of a plastic housing having fuses and relays on the front. A special converter box is located on the relay carrier. Its purpose is to amplify the control signals of the ignition switch, the electric steering column lock and the onboard supply control unit, link them to other signals and actuate mechanical relays. The repeated start lock is also implemented through the converter box in conjunction with the onboard supply control unit.S487_04635Electrical SystemOnboard supply control unitThe onboard supply control unit with two connector sockets familiar from the Jetta 2011 is fitted. It also includes the functions of the convenience system central control unit (J393). The data bus diagnostic interface J533 is integrated into the onboard supply control unit in the standard vehicle electrics system. In the enhanced vehicle electrics system, the data bus diagnostic interface J533 is not integrated into the onboard supply control unit but is installed externally.S487_087Selected important functions of the onboard supply control unit Load management Actuation of fuel supply through the electric fuel pump Actuation of door contacts Actuation of exterior mirror heating Seat heating authorisation Detection of externally dimmed interior lighting – information is placed on the CAN data bus Bonnet contact Fog lights Actuation of cornering lights Interlock Actuation of windscreen wiper speed I, II Actuation of intermittent windscreen wiper Exterior mirror heating LIN data bus for door (door control units and multifunction steering wheel) LIN data bus for roof (sliding/tilting sunroof) Cruise control system Actuation of brake lights, turn signals and hazard warning lights Repeated start lock Actuation of horn Authorisation and actuation of sliding/tilting sunroof Actuation of main beams, daytime driving lights, reversing lights, rear fog lights and (for onboard supply control unit, enhanced) bi-xenon lights Activation of sidelights and parking lights (possible only with ignition switched off) Actuation of heated rear window Tailgate authorisation Powertrain, convenience and diagnosis CAN data bus Data bus diagnosis interface (Gateway) Receiver for radio remote control (315 MHz) Function block for Kessy, the keyless entry locking and starting system Central locking Anti-theft alarm36The convenience systems – an overviewThe table here provides a brief overview of selected convenience systems in the Beetle. If you want to learn more about the systems, you will find more detailed information on the respective topics in the self-study programmes (SSPs) indicated in the table.Convenience systemGraphic overviewSeeTyre monitor display (TMD) The tyre monitor display (TMD) is a software module in the ABS control unit which evaluates data from the wheel speed sensors for the purpose of monitoring tyre pressure. Depending on the market, the tyre monitor display familiar from the Jetta 2011 is fitted in the Beetle 2012 EU.SSP 468S487_047"Keyless entry" locking and starting system The Beetle 2012 may be optionally equipped the the "keyless entry" locking and starting system, through which the vehicle can be unlocked or locked, and the engine can be started and stopped via a starter button. The keyless entry locking and starting system ensures the detection and identification of the key both inside and outside the vehicle.SSP 4681. Starter button E378 2. Onboard supply control unit J519 3. Converter box J935 4. ESL control unit J764 5. Entry and start authorisation control unit J518 6. Driver door exterior handle contact sensor G415 and driver side aerial for entry and start system R134 7. Front passenger door exterior handle contact sensor G416 and passenger side aerial for entry and start system R135 8. Entry and start authorisation aerial 1 in interior R138 9. Entry and start authorisation aerial 2 in interior R139 10. Luggage compartment aerial for entry and start authorisation R137 11. Rear bumper aerial for entry and start authorisation R13612.Vehicle KeyS487_04837Electrical SystemDash panel insertThe Beetle is equipped with a new three-dial dash panel insert based on the current module. The dash panel insert has a large round main display in the top middle and one smaller display each to the left and right. The figure illustrates the Highline version of a dash panel insert for Mexico and Canada in which the speed is indicated in kph, the distance travelled in km and the temperature in °C. The dash panel insert for the USA has a dual scale for indicating speed in mph and kph, and the scale divisions are modified accordingly. Distances are indicated in miles and temperatures in °F.S487_054Depending on the equipment, the dash panel is available in the following versions. • • Lowline HighlineBoth versions feature round instrument faces illuminated in white The following displays appear on the three dials. • • • Left dial – tachometer Centre dial – speedometer Right dial – fuel gaugeA multi-line multifunction display is located below the centre dial. There are different versions for Lowline and Highline.38Lowline versionThe Lowline version of the dash panel insert has a red-negative multifunction display.S487_098Highline versionThe Highline version of the dash panel insert has a monochrome white TFT multifunction display. It also provides navigation and audio information, which the Lowline version does not. Chrome decals on the dials and needles refine the appearance.S487_099The auxiliary instrumentDepending on the equipment, the Beetle 2012 may have a newly developed auxiliary instrument with three dials fitted on the top of the dash panel. The figure illustrates an example of the auxiliary instrument. It shows the version for Mexico and Canada, in which the oil temperature is indicated in °C, and the charge pressure in bar. If a US dash panel insert is used, the oil temperature is indicated in °F and the charge pressure in psi. The scale divisions for oil temperature and charge pressure are modified accordingly.S487_074The auxiliary instrument has the following displays • • • Left dial – current oil temperature Centre dial – multi-function stopwatch Right dial – current charge pressure of turbocharger39Electrical SystemNetwork designThe control units are networked via various CAN data bus systems so they can exchange data. The data bus diagnostic interface J533 (Gateway) forms the interface for the data bus systems. Due to differing loads on the CAN data busses depending on equipment, either of two different versions of the vehicle electrical system may be fitted in the Beetle 2012. 1 Standard vehicle electrical system 2 Enhanced vehicle electrical system For better recognition of the differences in the networks, both systems will be pictured separately below.Network overview in the standard vehicle electrical systemNetwork in standard vehicle electrical systemIn the standard vehicle electrical system, the onboard supply control unit J519 and the data bus diagnostic interface J533 are installed in a single control unit.Control units connected toDrive train CAN data bus Convenience CAN data bus Sensor CAN data bus LIN data busCAN data bus line LIN data bus line K-lead40KeyE3132) G853)4)Selector lever Steering angle sender Additional instruments ABS control unit Automatic gearbox control unit Airbag control unit Sliding sunroof adjustment control unit Air conditioning system control unit Control unit for dash panel insert Immobiliser control unit (integrated in J285 ) Driver door control unit Front passenger door control unit Multifunction steering wheel control unit Power steering control unit Control unit with display for radio and navigation Entry and start authorisation control unit Onboard supply control unit Data bus diagnostic interface (integrated in J519) Engine control unit Mechatronic unit for dual clutch gearbox ESL control unit Radio Amplifier Telephone transmitter and receiver unit Interface for external multimedia unit Diagnosis connection With automatic gearbox With dual clutch gearbox Steering angle sender G85 – with hydraulic power steering Steering angle sender G85 integrated in power steering control unit J500 – with electromechanical power steeringGX22 J104 J2171) J234 J245 J255 J285 J362 J386 J387 J453 J500 J503 J518 J519 J533 J623 J7432) J764 R R12 R36 R215 T16 S487_0751) 2) 3)4)a) CAN diagnostic data bus b) Roof LIN data bus41Electrical SystemNetwork in the enhanced vehicle electrical systemIn the enhanced vehicle electrical system, the onboard supply control unit J519 and the data bus diagnostic interface J533 (Gateway) are installed as separate control units due to the greater load on the CAN data bus. When referring to this version, one speaks of an "externally" fitted data bus diagnostic interface J533 (Gateway). This version is used in conjunction with, for example, a dual clutch gearbox in combination with a Highline dash panel insert or equipment or in conjunction with equipment like, for example, xenon lights.Network overview in the enhanced vehicle electrical systemControl units connected toDrive train CAN data bus Convenience CAN data bus Sensor CAN data bus LIN data busCAN data bus line LIN data bus line K-lead42KeyΕ3132) G853)4)Selector lever Steering angle sender Additional instruments ABS control unit Automatic gearbox control unit Airbag control unit Sliding sunroof adjustment control unit Air conditioning system control unit Control unit for dash panel insert Immobiliser control unit (integrated in J285 ) Driver door control unit Front passenger door control unit Headlight range control unit Multifunction steering wheel control unit Power steering control unit Control unit with display for radio and navigation Entry and start authorisation control unit Onboard supply control unit Data bus diagnostic interface Engine control unit Mechatronic unit for dual clutch gearbox ESL control unit Radio Amplifier Telephone transmitter and receiver unit Interface for external multimedia unit Diagnosis connection With automatic gearbox With dual clutch gearbox Steering angle sender G85 – with hydraulic power steering Steering angle sender G85 integrated in power steering control unit J500 – with electromechanical power steering With xenon headlightsGX22 J104 J2171) J234 J245 J255 J285 J362 J386 J387 J4315) J453 J500 J503 J518 J519 J533 J623 J7432) J764 R R12 R36 R215 T16 S487_0551) 2) 3)4)a) CAN data bus dash panel insert/auxiliary instrument b) CAN diagnostic data bus5)43Air conditioning systemAir conditioningA manual air conditioning system is used in the Beetle 2012.Vent for windscreenVent centre right in dash panelVent on right in dash panel Vent footwell front rightVent centre left in dash panelVent footwell rear rightVent on left in dash panel Vent footwell front leftS487_056Vent footwell rear left44Operation of manual air conditioning systemButton for air recirculationButton for rear window heaterAC button for air conditioningButton for driver seat heaterButton for front passenger seat heaterMechanical rotary knob for temperatureMechanical rotary knob for air distributionS487_057 Mechanical rotary knob for blower speedFunctions• • • • • One climate zone Switch on air conditioning via AC button Manual adjustment of blower speed via mechanical rotary knob Manual adjustment of temperature via mechanical temperature rotary knob Manual adjustment of air distribution via mechanical rotary knob45Radio, telephone and navigationRadio systems in the Beetle 2012Radio RCD 310The RCD 310 radio is characterised by the following features.Features may vary depending on vehicle equipment.S487_059Equipment features FSTN monochrome display with resolution of 302 x 45 pixels (FSTN = Film Super Twisted Nematic, or liquid crystal screen) 2 or 4 loudspeaker channels ( 20 Watts each) Dual-tuner phase diversity AM/FM aerial splitter RBDS FM Radio (Radio Broadcast Data System)AUX IN (audio input interface) in centre console External amplifier can be actuated/sound system Control via multifunction steering wheel (MFW) and multifunction display (MFD) GALA (speed-dependant volume control) SDARS (satellite radio), optional BAP compatible (BAP = operating and display protocol)CD drive Media support for MP3 and WMA audio data (with ID3 tag) May be combined with provision for mobile telephone BluetoothTM audio streaming possible Control via Media Device Interface (MDI) Air conditioning system informationConvenience coding Self-diagnosis capable, inc. loudspeaker diagnosis46Radio Premium 8The Premium 8 radio is configured for specific markets and differs accordingly in its scope of functions.•The radio is adapted, for example, for SDARS in the USA and Canada. In Mexico, the radio is equipped, for example, with appropriately modified frequency ranges and has no SDARS.•Features may vary depending on vehicle equipment.S487_060Equipment features Touch-sensitive 6.5" TFT colour screen with a resolution of 400 x 240 pixels 2 or 4 loudspeaker channels ( 20 Watts each) Dual-tuner phase diversity Configurable tuner (band limits, frequency raster, de-emphasis) SDARS (satellite radio)* Integrated 6-CD changer Air conditioning system informationRBDS AM/FM radio (Radio Broadcast Data System) AUX IN (audio input interface) in centre console External amplifier can be actuated/sound systemGALA (speed-dependant volume control) Control via multifunction steering wheel (MFW) and multifunction display (MFD) BAP compatible (BAP = operating and display protocol) Convenience coding Self-diagnosis capable, inc. loudspeaker diagnosisSD card reader Media support for MP3 and WMA audio data (with ID3 tag) May be combined with provision for mobile telephone Control via Media Device Interface (MDI)*USA and Canada47Radio, telephone and navigationRNS 315 radio/navigation systemThe RNS 315 radio/navigation system is characterised by the following features.Features may vary depending on vehicle equipment.S487_061Equipment features Touch-sensitive 5" TFT colour screen with a resolution of 400 x 240 pixels 2 or 4 loudspeaker channels ( 20 Watts each) Navigation function via 3D map and voiceNavigation map data in internal Flash; map update via SD card AUX IN (audio input interface) Control via multifunction steering wheel (MFW) and multifunction display (MFD) External amplifier can be actuated/sound system Integrated BluetoothTM module BAP compatible (BAP = operating and display protocol) Convenience coding Self-diagnosis capable, inc. loudspeaker diagnosisDual-tuner phase diversity RBDS AM/FM radio (Radio Broadcast Data System) with diversity and TMC (Traffic Message Channel) SDARS (satellite radio) CD drive SD card reader MP3 playback functions Control via Media Device Interface (MDI) Air conditioning system information48RNS 510 radio/navigation systemThe RNS 510 radio/navigation system is characterised by the following features.Features may vary depending on vehicle equipment.S487_070Equipment features Touch-sensitive 6.5" TFT colour screen with a resolution of 800 x 480 pixels 2 or 4 loudspeaker channels ( 20 Watts each) Integrated hard disc for navigation und MP3 RBDS AM/FM radio (Radio Broadcast Data System) SDARS (satellite radio) FM 3 tuner diversity with two aerials Satellite radio with traffic flow DVD drive SD card reader Control via Media Device Interface (MDI)Video and audio inputs May be combined with provision for mobile telephone Offroad function AUX IN (audio input interface) in centre console Control via multifunction steering wheel (MFW) External amplifier can be actuated/sound system Picture navigation BAP compatible (BAP = operating and display protocol), optional Convenience coding Self-diagnosis, inc. loudspeaker diagnosisAudio/video/MP3 playback function Navigation functions: map, split screen, voice49Radio, telephone and navigationThe sound systemThe Beetle 2012 has a standard sound system with eight speakers. It can optionally be equipped with a new sound system including a subwoofer. Fender speakers are used.* Depending on vehicle equipment, one of the radios or radio/navigation devices shown in the figure can be used in the sound system.KeyJ503 R R12 R14 R15 R16 R17 R20 R21 R22 R23 Control unit with display for radio and navigation Radio Amplifier Rear left treble loudspeaker Rear left bass loudspeaker Rear right treble loudspeaker Rear right bass loudspeaker Front left treble loudspeaker Front left bass loudspeaker Front right bass loudspeaker Infotainment CAN data bus S487_062 Front right treble loudspeakerR211 SubwooferThe sound system comprises • • • four bass speakers – for a powerful bass with great response, four treble speakers – to provide transparency and clarity for authentic playback of music and one subwoofer in the luggage compartment.The loudspeaker system is powered by a 400 Watt digital amplifier. The amplifier is installed under the left front seat. The system can be combined with the RCD 310 and Premium 8 radios and with the RNS 315 and RNS 510 radio/navigation systems.50Media Device Interface boxThe Beetle 2012 may be optionally equipped with a media device interface (MDI). The MDI makes it possible to connect mobile audio or multimedia devices to the infotainment system and display the audio content and select via the infotainment monitors and play it through the vehicle speaker system. The MDI control unit is in the glove compartment – below the front passenger airbag deactivation switch – in a box behind the rear wall of the glove compartment.Adapter connectionS487_063Adapter cablePossible connections with USB adapter cableS487_064 S487_066 Possible connections with USB adapter cable for Apple iPod/iPhoneS487_065 Possible connections with mini-USB adapter cableConnection possibilitiesThe mobile device is connected with the appropriate special adapter cable to the adapter connection that serves as a central interface. The following audio formats are currently supported and can be played back: MP3, AAC, WMA und OGG Vorbis.51Radio, telephone and navigationMobile telephone preparationEnhancedThe mobile telephone is paired only via BluetoothTM with the Premium mobile telephone provision. Only voice data are transmitted between the microphone, the telephone transmitter and receiver unit (R36) and the vehicle's loudspeaker system. GSM communication with the network provider takes place via the aerial in the mobile telephone.Multifunction steering wheel*Three-button module*Telephone transmitter and receiver unit R36DP A2Apple iPod, with BluetoothTM dongleA P, HFP 2DMobile telephoneOnboard supply control unit J519LoudspeakersS487_067 * Beetles with multifunction steering wheel do not have a three-button module; those without multifunction steering wheel are equipped with a three-button module. RCD 310/Premium 8 RNS 510Microphone in roof moduleScope of functions• • • Hands-free profile (HFP 1.5) BT audio streaming (A2DP 1.2) Telephone data transfer and mobile telephone connection via BluetoothTM • • • Voice control Operation via multifunction steering wheel (optional) Three-button module* in headliner52RNS 315 with integrated BluetoothTM modeThe mobile telephone preparation is built directly in the RNS 315. No other control components besides the RNS 315 are required. The mobile telephone is paired only via BluetoothTM. Only speech data and control commands are transmitted. GSM communication with the network provider takes place via the aerial in the mobile telephone.Multifunction steering wheelMobile telephoneHF P, A2D PLoudspeakersOnboard supply control unit J519RNS315DP A2Microphone in roof moduleS487_089Apple iPod, with BluetoothTM dongleScope of functions• • Hands-free profile (HFP 1.5) BT audio streaming (A2DP 1.2), telephone data transmission and mobile telephone connection via BluetoothTM • • • Voice control Convenience operation via RNS 315 Operation via multifunction steering wheel (optional)53Radio, telephone and navigationAerial systemsSeveral aerials for AM, FM1 and FM2 are integrated in the rear window of the Beetle 2012. The aerials for navigation (GPS) and satellite reception (SDARS) are accommodated in the separate roof aerial. The FM impedance converters are built into the middle of the rear lid on either side of the rear window.Radio with diversity aerial and SDARSPremium 8 RCD 310Roof aerial SDARSFM2 impedance converterAM/FM1 impedance converterS487_068Radio/navigation system with diversity aerial, SDARS and GPSRNS 510RNS 315SDARS GPS FM2 impedance converter AM/FM1 impedance converterRoof aerialS487_06954ServiceDiagnosisVehicle testers such as a PC or notebook or the VAS 5051 B with ElsaWin (electronic service information system) diagnostic software may be used to perform diagnosis.The following diagnostic information is available for the Beetle 2012. • • Guided fault finding and Guided functionsPC or notebookIn order that the vehicle diagnostic tester can work properly and supply the needed information, the following requirements must be observed: • • • • The most current version of the brand CD must be installed. All program instructions must be followed exactly. Make sure that the correct vehicle and model have been selected. Make sure that there is a network connection and that the user's network rights are valid.S487_090VAS 5051 BA great deal of information for the Beetle 2012 is examined in order to guarantee a fast and reliable diagnosis. The following guided functions are available. • • • • Codes Adaptations Measured value blocks Basic settings etc.S487_091The entire scope of possible information was developed and conscientiously examined so that it is completely usable for the dealership network.When the diagnostic system is used, comments can be sent via ELSA Feedback.55487© 2011 Volkswagen de México S.A. de C.V. All rights reserved. Subject to technical modifications. 000.2812.47.20 Technical status 07/2011 Volkswagen de México, S. A. de C.V. Entrenamiento a la Red Servicio Km. 116 Aut. México Puebla Puebla México.