TECHNICAL DOCUMENTATION
SSP 608 The Audi 1,6l and 2,0l 4 cylinder TDI engines

This PDF is currently unavailable.
Read document text
Self Study Programme 608 For internal use onlyThe Audi 1.6l and 2.0l 4-cylinder TDI enginesAudi Service TrainingThe new modular TDI® generation provides a harmonised basis for future diesel engines. It comprises four cylinder engines with displacements from 1.6 l to 2.0 l and power outputs from 66 kW to 135 kW in the various exhaust emission versions. Audi’s engine development engineers have translated this strategy to the Modular Diesel Platform (MDP) in order that successive platforms in the mid-range, compact and subcompact classes can be supplied with identical or adapted engine assembly modules in future. This will allow for standardised procedures during the development process and at production facilities within the Group, whilst also ensuring an economical flow of materials.The modular design principle has been applied both to the core assemblies (basic engine assembly, cylinder head and valvegear) and to the attachments (close-coupled exhaust gas treatment system and intake manifold with integrated charge air cooler). The Modular Diesel Platform (MDP) will: • meet future exhaust emission regulations, • reduce CO2 emissions still further, • cater to EU and NAR markets by providing an identical basic concept and • eliminate the need for universal use of SCR (selective catalytic reduction) and accompanying engineering work in vehicle platforms.608_001Learning objectives of this Self Study Programme: This self study programme describes the design and function of the 1.6l/2.0l 4-cylinder TDI engine (MDP – Modular Diesel Platform). After you have worked your way through this Self Study Programme, you will be able to answer the following questions:• • • •How are the balancer shafts driven? What is the function of the exhaust flap in the exhaust system? What is the term used to describe the cooling system at cold start? What distinguishes the cylinder block of the 1.6l TDI from that of the 2.0l TDI engine? • In what order are the cylinder head valves fitted?2ContentsIntroductionBrief technical description _________________________________________________________________________________________________________________________________ 4 Specifications ________________________________________________________________________________________________________________________________________________ 6Engine mechanicalsCylinder block _______________________________________________________________________________________________________________________________________________ 8 Crank mechanism ___________________________________________________________________________________________________________________________________________ 9 Balancer shafts _____________________________________________________________________________________________________________________________________________ 10 Drive mechanism for auxiliary units ______________________________________________________________________________________________________________________ 10 Toothed belt drive __________________________________________________________________________________________________________________________________________ 11 Cylinder head _______________________________________________________________________________________________________________________________________________ 12 Positive crankcase ventilation ____________________________________________________________________________________________________________________________ 15Oil supplyOil circuit ____________________________________________________________________________________________________________________________________________________ 16 Oil pump with integral vacuum pump ___________________________________________________________________________________________________________________ 17 Oil filter module ____________________________________________________________________________________________________________________________________________ 21Variable camshaft timingIntroduction ________________________________________________________________________________________________________________________________________________ 23 Design _______________________________________________________________________________________________________________________________________________________ 23 Function _____________________________________________________________________________________________________________________________________________________ 24 Operating ranges ___________________________________________________________________________________________________________________________________________ 25Exhaust gas recirculationExhaust emission standards ______________________________________________________________________________________________________________________________ 26 Installation list for exhaust gas recirculation system __________________________________________________________________________________________________ 26Cooling systemThermal management _____________________________________________________________________________________________________________________________________ 32 Switchable coolant pump _________________________________________________________________________________________________________________________________ 32 System overview ___________________________________________________________________________________________________________________________________________ 34 Coolant thermostat as 3/2-way valve ____________________________________________________________________________________________________________________ 39Fuel systemOverview ____________________________________________________________________________________________________________________________________________________ 40Exhaust systemLongitudinally mounted engines _________________________________________________________________________________________________________________________ 42 Transversely mounted engines ___________________________________________________________________________________________________________________________ 42Engine management systemSystem overview ___________________________________________________________________________________________________________________________________________ 44ServiceSpecial tools and workshop equipment __________________________________________________________________________________________________________________ 46AnnexSelf Study Programmes ___________________________________________________________________________________________________________________________________ 47• The Self Study Programme teaches a basic knowledge of the design and functions of new models, new automotive components or new technologies. It is not a Repair Manual! Figures are given for explanatory purposes only and refer to the data valid at the time of preparation of the SSP. For further information about maintenance and repair work, always refer to the current technical literature.NoteReference3IntroductionBrief technical descriptionTechnical features of the 1.6l/2.0l 4-cylinder TDI engine (MDP)Cylinder block with integrated balancer shafts (2.0l TDI engine only)608_008Oxidising catalytic converter and diesel particulate filter (transverse installation)608_049Cylinder head with variable valve timing (engines conforming to the EU6 exhaust emission standard)608_021 4Oil pump with integral vacuum pump608_017Switchable coolant pump608_018Intake manifold module with integrated charge air cooler608_009608_019 5SpecificationsTorque/power curve of 1.6l TDI enginePower output in kW Torque in NmEngine number608_059Engine speed [rpm]608_002Engine code Type Displacement in cm3 Stroke in mm Bore in mm Cylinder spacing in mm Number of valves per cylinder Firing order Compression ratio Power output in kW at rpm Torque in Nm at rpm Fuel Engine management system Maximum injection pressure in bar Emissions standard CO2 emission in g/kmCLHA Four-cylinder inline engine 1598 80.5 79.5 88.0 4 1–3–4–2 16.2 : 1 77 at 3000 – 4000 250 at 1500 – 2750 Diesel to EN 590 Bosch EDC 17 1800 with solenoid valve injector CRI2-18 EU5 996Torque/power curve of 2.0l TDI engineEngine with engine codes CRLB and CRBC Power output in kW Torque in Nm (CRLB) Torque in Nm (deviation from CRBC) Engine with engine code CUPA Power output in kW Torque in NmEngine number608_057Engine speed [rpm]608_003Engine code Type Displacement in cm3 Stroke in mm Bore in mm Cylinder spacing in mm Number of valves per cylinder Firing order Compression ratio Power output in kW at rpm Torque in Nm at rpm Fuel Engine management system Maximum injection pressure in bar Emissions standard CO2 emission in g/kmCRBC Four-cylinder inline engine 1968 95.5 81.0 88.0 4 1–3–4–2 16.2 : 1 110 at 3500 – 4000 320 at 1750 – 3000 Diesel to EN 590 Bosch EDC 17 1800 with solenoid valve injector CRI2-18 EU5 106CRLB Four-cylinder inline engine 1968 95.5 81.0 88.0 4 1–3–4–2 16.2 : 1 110 at 3500 — 4000 340 at 1750 – 3000 Diesel to EN 590 Bosch EDC 17 2000 with solenoid valve injector CRI2-20 EU6 1)CUPA Four-cylinder inline engine 1968 95.5 81.0 88.0 4 1–3–4–2 15.8 : 1 135 at 3500 — 4000 380 at 1750 – 3250 Diesel to EN 590 Bosch EDC 17 2000 with solenoid valve injector CRI2-20 EU5 -1)1)Data was unavailable at time of going to print.7Engine mechanicalsCylinder blockAs with previous units, the cylinder block of the 1.6l / 2.0l TDI engine is made of cast iron. The material in question is an alloy of cast iron and nodular graphite (GG-GJL-250). In addition to having a high tensile strength of 250 – 300 Nm/mm2, this material boasts a number of outstanding properties. The construction of the cylinder block was also revised. For instance, the influence of the threaded connections was shifted towards the bottom end of the cylinder block by using low-seated cylinder bolt threads. The net effect is an optimised distribution of power flow within the engine block structure. This results in higher pre-compression of the combustion chamber stopper as well as providing a more homogeneous pressure distribution across the full circumference of the cylinder head gasket. In addition, the cylinders are finished by bolting a honing plate to the engine block. This allows the cylinder heads to be mounted without warping, thereby reducing prestress in the piston rings.The cylinder block has the following technical features: • • • • Integrated balancer shafts above the crankshaft Short water jacket for rapid component heating Optimal cooling of the webs between the cylinders Integration of thermal management measures into the oil and water circuitsOverviewCylinder blockBalancer shaftInsert in the oil pan (designed as baffle plate with oil windage tray)Oil pan608_016 8Differences between the 1.6l and 2.0l TDI enginesUnlike the 2.0l TDI engine, the lower-displacement engine version does not have balancer shafts. For this reason, the cylinder block was adapted in these areas.608_014Crank mechanismComponents: • Forged crankshaft mounted in five bearings • For weight reasons, only four counterweights are used • Cracked trapezoidal conrods • Bowl pistons without valve pockets • A single annular oilway • supplied with cooled oil for cooling the piston crownOil pump chain sprocketBalancer shaft 1Engine timing chain sprocketBalancer shaft 2608_0159Balancer shaftsTo neutralise second order free inertial forces, use is made of a balancer shaft system which is integrated in the cylinder block over the crankshaft. Vibration is combatted by dual counter-rotating shafts with counterweights rotating at twice the speed of the engine. The direction of rotation of the second shaft is reversed by an idler gear. Drive is provided by the crankcase through helical-cut gears on the output side. The shafts and the idle gear are located radially and axially by a roller bearing. The bearings are lubricated with oil spray from the cylinder block. Roller bearings lubricated with oil spray have less of a drag effect at low temperatures and high engine speeds.Roller bearingBalancer shaft 2Roller bearingBalancer shaft 1CrankshaftIdler gear for direction reversal608_034Drive mechanism for auxiliary unitsThe auxiliary unit mount supports the alternator and the A/C compressor. An automatic belt tensioner driven by the crankshaft via the vibration damper ensures that the poly V-belt is tensioned correctly.Automatic tensioning pulleyAlternatorCrankshaft vibration absorberA/C compressor608_035 10Toothed belt driveThe timing gear is fitted with a high-mileage toothed belt1). The toothed belt runs from the crankshaft to the tensioning pulley, and via the camshaft sprocket to the high pressure pump drive and the switchable coolant pump. Interposed deflection pulleys provide increased wrap-around of the chain sprockets.Camshaft sprocketAutomatic tensioning pulleyDeflection pulleyDeflection pulleyCrankshaftCoolant pumpHigh pressure fuel pump608_0231)For information on replacement of the toothed belt, please refer to the applicable version of "Strict Maintenance Operations".11Cylinder headSpecial features of the cylinder head1) are the "offset radial valve arrangement", a split coolant jacket and a vertical intake manifold flange. The cylinder head comprises two components: firstly, the bearing frame with integral camshafts (integrated valvegear module) and, secondly, the cylinder head with fittings. The camshaft tubes are inserted into the enclosed bearing frame to create the integrated valvegear module. With this method, the finish-machined bearing frame is mounted in a fixture, and the finish-ground, heated cam elements and the encoder wheel are held in the correct position in the bearing frame by a joining cassette. Having been fitted with end pieces and supercooled, the camshaft tubes are then passed through the frame mounting points and the heated cams. When the temperatures of the components are equalised, both camshafts are mounted inseparably in the integrated valvegear module. This method allows the camshaft mounting to be designed for high rigidity and low weight. To minimise friction, there is a needle bearing on the output side of the camshaft. The thermal joining method described here is used for the first time in diesel engines of the Volkwagen Group. Previously, the components were press-fitted hydraulically.1)Needle bearing608_022The figure shows the EU6 version.Legend of figure on page 13:1 2 3 4 5 6 7 8 9 Fuel pressure regulating valve N276 High pressure fuel reservoir Fuel pressure sensor G247 Clamping elements Injectors Positive crankcase ventilation and vacuum reservoir Cylinder head cover Pressure accumulator of the variable valve timing Intake manifold module with integrated charge air cooler 10 11 12 13 14 15 16 17 18 Intake camshaft timing adjustment valve 1 N205 Needle bearing Bearing frame with camshafts Roller-type cam follower Camshaft valves 1 Camshaft valves 2 Cylinder head High pressure exhaust recirculation duct Distributor rail12Component overview341 25 611781213 9 101415181617608_020 13Arrangement of intake and exhaust flapsDue to the offset radial valve configuration, the intake and exhaust flaps are arranged one behind the other as seen from the intake manifold flange side. This allows each of the camshafts to actuate an intake valve and an exhaust flap. Compared to the predecessor model, the ducts were redesigned to allow for the modified valve arrangement. The focus was placed on increasing maximum through-flow at good swirl rates. The absence of swirl flaps was compensated by integrating a seat swirl chamfer in each of the intake ports. This ensures that a good swirl effect is maintained throughout the valve stroke. In addition, the intake flange was arranged vertically to allow the use of an intake manifold with integrated charge air cooling system in the available installation space.First exhaust flap of second cylinderFirst intake valve of second cylinder First cylinderIntake airSecond exhaust flap of second cylinder Intake side Second intake valve of second cylinderExhaust gasesExhaust side608_036Coolant jacket in cylinder headTo increase heat dissipation in vicinity of the combustion chamber, the water jacket was split into lower and upper water jacket cores. Both cores are mounted independently of one another in the gravity die, and not conjoined in the casting. A defined cross section which limits the upper volumetric flow is produced on the control side by mechanical machining. The heater flange with ventilation socket merges the coolant flows at the common outlet to the heater heat exchanger. When the engine is cold, the coolant in the lower and upper water jacket cores is diverted towards the heater heat exchanger via the EGR cooler.Defined cross sectionUpper water jacketCylinder head outletLower water jacket in proximity to the combustion chamber plate14608_043Positive crankcase ventilationThe cylinder head cover is made of polyamide. Its principal task is to seal the cylinder head and integrate the vacuum reservoir. Additional functions, such as the separation of coarse and fine of the oil from the blow-by gases and pressure regulation in the cylinder crankcase, are also integrated. The blow-by gases flow from the crank chamber into the coarse oil separator through small ports and then from the crank chamber into the cyclones. Fine oil separation takes place here. After passing through the cylones, the blow-by gases flow to the pressure control valve. In addition, they are fed into the combustion chamber through the intake manifold.Vacuum reservoirHeating resistor (crankcase breather) N79 (cold climates only)Pressure control valveFine oil separation (cyclones)Oil return from fine oil separatorGravitational valve for oil recirculation608_05115Oil supplyOil circuitOil pressure accumulator for variable camshaft timing Longitudinally mounted oil filter module Camshaft oil gallery Turbocharger oil supply Oil gallery of the hydraulic tappetsOil pressure switch F22Oil pressure switch for reduced oil pressure F378Two-stage oil pumpPiston cooling jetsCrankshaft oil galleryOil level and temperature sensor G266608_024 16Oil pump with integral vacuum pumpThe combined oil/vacuum pump is located in the oil pan and bolted to the cylinder block from below. It is driven by the crankshaft via the toothed belt drive. The toothed belt is immersed in oil and has no belt tensioner; pretensioning is defined by the axial spacings between components. This ensures ideal friction conditions in the duopump drive.Oil pump toothed belt cover with integrated crankshaft ring sealOil/vacuum pump integrated in the oil pan.Drive via separate toothed beltConnections to the vacuum supply and oil circuitIn addition to the vacuum line, the oil pressure control valve N428 is integrated in the cylinder block via the oil pan. It is connected to the vacuum line via ports in the vacuum pump and in the cylinder block.608_017Vacuum line from cylinder block to vacuum equipmentOil pressure control valve N428Oilway to main oil galleryCombined oil/vacuum pump integrated the oil pan608_038 17DesignThe pump is a vane cell pump with an excentrically mounted adjustment ring. To reduce the required drive output, the oil pump has a volumetric flow control mechanism. The delivery characteristic can be adjusted using a rotatably mounted adjustment ring. By applying oil pressure to the adjustment ring via a control surface, it can be swivelled against the force of the control spring. A specially shaped intake manifold ensures reliable engine oil intake from the oil pan, even when the vehicle is subjected to high transverse acceleration. The vacuum pump induces air from the brake servo through a vacuum line and ports in the cylinder block. The extracted air flows through flutter valves into the cylinder block and ventilates its inner chamber. This air is then admitted into the combustion chamber via the engine breather as blow-by gas. The double flutter valve provides a cross section which is large enough to expel the oil into the vacuum pump chamber. This helps to keep drive torque to a minimum, even at low temperatures.Component overviewVacuum pump cover Housing Flutter valve Control piston Input gearRotor with vacuum pump vaneDouble flutter valveAdjustment ringRotor with vane cellsOil pressure relief valveIntake manifoldControl springOil pump cover608_025Oil pressure controlThe oil pump operates in two pressure stages, which are activated in dependence on engine speed.1Low pressure stage: oil pressure 1.8 – 2.0 bar High pressure stage: oil pressure 3.8 – 4.2 barOil pressure [bar]221Engine speed [rpm]18608_078FunctionLow delivery rate At low engine speeds, the oil pressure control valve N428 energised by terminal 15 is connected to ground by the engine control unit and opens the active oilway to the control piston. The oil pressure now acts on both faces of the control piston, pushing the piston against the control piston spring and opening the oilway to the control surface of the adjustment ring. The oil pressure acts on the control surface. The resultant force is greater than that of the control spring and swivels the adjustment ring counterclockwise into the centre of the vane cell pump, thereby reducing the delivery space between the vane cells. The lower pressure stage is activated in dependence on engine load, engine speed, oil temperature and other operating parameters, reducing the drive output of the oil pump.Control surface Adjustment ringSmall delivery chamberVane cells Control spring Control piston608_026Control piston springControl pistonActive oilwayOil pressure control valve N428Oil panNon-return valveOil pressure from the oil gallery608_05519High delivery rate In the upper engine speed range or at high engine load (fullthrottle acceleration), the oil pressure control valve N428 is disconnected from ground by the engine control unit J623 in order to vent the active oilway. The force of the remaining surface under oil pressure is less than the force of the control piston spring and closes the oilway to the control surface of the adjustment ring. In the absence of oil pressure, the control spring swivels the adjustment ring clockwise about the counter-bearing. The adjustment ring now swivels out of its centre position and enlarges the delivery space between the individual vanes. Oil delivery is increased by enlarging the spaces between the vane cells. The higher volumetric oil flow is countered by the oil ports and by crankshaft bearing play, causing the oil pressure to increase. This made it possible to realise a volume-controlled oil pump with two pressure stages.Large delivery chamber Support bracket608_027Control piston springControl pistonActive oilwayOil pressure control valve N428Control edgeOil panNon-return valveOil pressure from the oil gallery608_056Note The maximum rate of delivery is always available when the solenoid valve is deenergised.20Oil filter moduleDepending on the engine's installation position, there are two different oil filter modules. In addition, the oil filter module consists of the oil cooler, which is mounted to the side of the oil filter module, as well as the oil filter bypass valve and oil cooler bypass valve.Longitudinally mounted enginesThe oil filter module for longitudinal engine installation comprises the following components: • Upright oil filter housing with oil drain valve • Filter cartridge • Oil pressure switch for reduced oil pressure F378 (0.3 – 0.6 bar) • Oil pressure switch F22 (2.5 – 3.2 bar)Longitudinally mounted enginesFilter cartridgeCoolant return line from the oil coolerOil pressure switch F22Oil return line to the engine lubrication pointsOil pressure switch for reduced oil pressure F378Coolant feed line to the oil coolerOil coolerOil feed line from the oil pump608_04521Transversely mounted enginesComponents • Upright oil filter housing with oil drain valve • Filter cartridge • Oil pressure switch for reduced oil pressure F378 (0.3 – 0.6 bar) • Oil pressure switch F22 (2.5 – 3.2 bar) In addition, the oil filter module comprises the oil cooler, which is mounted to the side of the oil filter module, as well as the oil filter bypass valve and the oil cooler bypass valve.Oil coolerCoolant return line from the oil coolerOil pressure switch F22 Oil filter bypass valve Oil return line to the engine lubrication points Oil pressure switch for reduced oil pressure F378Coolant feed line to the oil coolerFilter cartridgeOil feed line from the oil pump608_04622Variable camshaft timingIntroductionSwivel motorIn addition to reducing raw emissions, future technical development efforts will focus on cutting fuel consumption. A possible solution is to use a variable valvegear. A charge motion can be induced by using a variable intake, rendering a swirl flap superfluous. Another alternative is to adapt the intake valve timing for advanced or retarded closing, thereby allowing NOx and CO2 emissions to be reduced. Compression can also be effectively reduced by means of a variable intake valve timing mechanism. This would result in lower compression temperatures and, in turn, in reduced NOx emissions. Variable camshaft timing is only used in vehicles which meet the EU6 exhaust emission standard. Multiple valvegear variables can be controlled by using a phase adjuster in combination with a mixed intake and exhaust camshaft configuration. This technical innovation allows: • optimised volumetric efficiency at full throttle • optimised emissions and fuel efficiency through variable (and thus more effective) compression • maximum expansion loop utilisation • high compression ratios at cold start Variable valve timing is provided by means of a swivel motor. At engine start, the swivel motor is mechanically locked in the advance position by a locking bolt until the required oil pressure is achieved. The active adjustment range for the intake and exhaust flaps is 50° of crank angle after retard.Valve travel 608_021Piston pressure accumulator Camshaft sensor configured as a Hall sender G40 on an adjustable camshaft608_037Key: 1 2 3 Exhaust: Intake: Intake: variable opening variable opening variable closingAdvance: both intake valves open simultaneously Retard: only the rear intake valve on the “exhaust side” opens; opening of the second intake valve is delayedDesignSwivel motor (stator)Solenoid coil for camshaft timing adjustment valve 1 N205 Cover with gearSwivel motor (rotor)Mechanical locking boltCover Spring608_053Control valve of camshaft timing adjustment valve 123FunctionThe swivel motor is supplied with pressurised oil by the volumecontrolled oil pump via a separate pressure line in the cylinder head. The camshaft is adjusted by the engine control unit by means of a 4/2-way proportional valve, which is activated in a pulsewidth-modulated manner. The inner vane ring (rotor) of the swivel motor is connected to the camshaft. The outer ring (stator) is fixed to a gear which engages a gear on the driven camshaft. The camshaft is adjusted relative to the crankshaft by applying oil pressure to working chambers (A) and (B) between the rotor and stator.Mesh oil filter Non-return valve Swivel motor (rotor)Piston pressure accumulatorSwivel motor (stator)Mechanical locking bolt Solenoid coil for camshaft timing adjustment valve 1 N205 Control valve from camshaft timing adjustment valve 1608_010Airflow – at retarded ignition timing during the intake cycleSectional view of swivel motorResetting springControl valveCamshaft timing adjustment valve 1 N205 Swivel motor (stator)Piston pressure accumulatorSwivel motor (rotor)608_060 24Camshaft608_054Operating rangesA swivel motor of the camshaft adjustment system must be subjected to a high volumetric oil flow during the adjustment cycle in order to ensure rapid control response. The camshaft adjustment system is supplied with oil by a two-stage, volumecontrolled oil pump. To ensure rapid camshaft adjustment in the first stage at a low pressure level, a pressure accumulator was integrated in the camshaft adjuster. This pressure accumulator ensures a sufficient supply of oil, whereby the holding pressure inside the pressure accumulator can be up to 1.8 bar. The camshaft timing adjustment valve 1 N205 dictates when the pressure accumulator releases its oil into the corresponding port on the swivel motor. The camshaft timing adjustment valve 1 is activated by the engine control unit J623 in a pulse-width-modulated manner. In the unpressurised oil chamber, the oil is expelled from the swivel motor and forced into the return line. If the gallery pressure is less than the pressure inside the pressure accumulator during camshaft adjustment, the adjustment cycle is always assisted by the pressure accumulator. When the swivel motor reaches its end position, the oil pressure in the pressure accumulator is restored and the oil pressure in the feed line is at gallery pressure. The camshaft timing adjustment valve 1 N205 can be set in such a way that both working chambers are subjected to oil pressure. Depending on the oil pressure conditions in working chambers (A) and (B), both the rotor and the camshaft are adjusted to either "advance" or "retard". When the engine is shut off, the swivel motor is adjusted to the "advance" position with spring assistance and locked.Adjustment to advance The oil pressure is admitted to working chamber (A) through camshaft adjustment valve 1 N205, thereby advancing the rotor towards working chamber (B).C DEN205FB ABAAdjustment to retard The camshaft is locked in the "advance position". The spring-loaded differential pressure bolt is released by the pressure of the engine oil. Camshaft adjustment valve 1 N205 opens working chamber (A), releasing the oil pressure into the return line. The oil pressure from the pressure accumulator in working chamber (B) displaces the swivel motor towards the "retard" position.608_013Continuously variable valve timing is achieved by pulse-widthmodulated activation.E N205F C DB ABAKey:A B608_012A B C DWorking chambers in the swivel motor Oil pump Engine lubrication system Mesh oil filter Nonreturn valveEPiston pressure accumulator E1: Start of charging at approx. 0.6 bar E2: End of charging at approx. 1.8 bar F Camshaft adjuster (swivel motor) N205 Intake camshaft timing adjustment valve 125Exhaust gas recirculationExhaust emission standardsThe various versions of the exhaust gas recirculation system are subdivided according to the applicable EU exhaust emission standards. A common feature of all versions is an intake manifold module with an integrated water-cooled charge air cooler with a flange or distributor rail. The task of the intake manifold module is to direct the fresh air flow (including high and low pressure exhaust gas recirculation) into the cylinder head. Depending on driving cycle, the compressed air is cooled according to requirements by the integrated charge air cooler. This is achieved by variation of the coolant flow rate by the electrical coolant pump.Overview of exhaust emission standards The engine is manufactured in the following emission versions. • EU4 with high pressure exhaust gas recirculation • EU5 with low pressure exhaust gas recirculation • EU6, EU6 heavy duty and BIN5 with low and high pressure exhaust gas recirculation. In vehicles in EU6 heavy duty and BIN5 configurations, the SCR (selective catalytic reduction) system with cylinder pressure sensors in the glow plugs is additionally installed. In the BIN5 configuration, use is made of an additional coolant temperature sensor at radiator outlet G83. Depending on exhaust emission standard, there are differences between components, both in terms of type and how the exhaust gases enter the intake system.Installation list for exhaust gas recirculation systemFeatures High pressure exhaust recirculation Low pressure exhaust recirculation Cooled exhaust recirculation valve Uncooled exhaust recirculation valve SCR system (AdBlue) EGR cooler Additional temperature sensor at radiator outlet 4-way catalytic converter (modified coating on the monoliths) Cylinder pressure sensorEU4 xEU5EU6 xEU6 heavy duty x x x x xBIN51)/ULEV x x x x x x xx x xx x xxxxxx 1 1 41)The term "BIN" stems from the word "bag". During exhaust emission tests, the exhaust gases are collected in bags and analysed. Exhaust emission standards are ranked from BIN10 to BIN5.26Engines in EU4 configuration (high pressure exhaust recirculation)The EU4 version has a high pressure exhaust gas recirculation system with a cooled EGR valve and an EGR cooler. The EGR cooler has a vacuum-controlled bypass flap which is actuated by the engine control unit depending on operating temperature. Upstream of the exhaust turbocharger the recirculated exhaust gases flow through a port in the cylinder head and into a watercooled exhaust gas recirculation valve mounted on the distributor rail. The recirculated exhaust gases are divided among the compressed air and the cooled charge air via the distributor rail. This air mixture is channeled to the cylinder head intake port.Distributor railWater-cooled EGR valve608_048Design of the exhaust gas recirculation (EGR) coolerVacuum connectionVacuum cellEGR bypass valve Coolant return line Uncooled/cooled exhaust gases to intake manifoldExhaust gas inletCoolant feed lineDivider plate608_041 27Engines in EU5 configuration (low pressure exhaust recirculation)The EU5 version has a low pressure exhaust recirculation system with an uncooled EGR valve and an EGR cooler on the diesel particulate filter. Downstream of the diesel particulate filter the recirculated exhaust gases flow through the water-cooled EGR cooler to the uncooled exhaust gas recirculation valve via a filter cartridge. From here, the cooled exhaust gases are channeled to the exhaust turbocharger compressor, optimally mixed with charge air and admitted to the intake manifold system with integrated charge air cooler. To utilise the low pressure exhaust gas recirculation system across the full mapped range, the complete exhaust gas flow from the diesel particulate filter is shut off in a controlled manner by a motor-operated exhaust flap. This produces an excess pressure of approx. 30 – 40 mbar downstream of the particulate filter relative to the exhaust pressure downstream of the exhaust flap. This excess pressure results in a positive flow gradient (purging rate) via the EGR cooler and the following EGR valve. The quantity of recirculated exhaust gas is controlled by the EGR valve. The 73° operating range of the exhaust flap is defined by: • exhaust pressure downstream of the exhaust flap • nominal exhaust pressure upstream of the exhaust flap • mass flow through the exhaust flapSystem overviewOxidising catalytic converterDiesel particulate filterFlex tubeEGR cooler608_061Exhaust flap control unit J88328Design of the exhaust gas recirculation (EGR) cooler Transversely mounted engines Longitudinally mounted enginesEGR throttle valveCoolant return line EGR throttle valve EGR servomotor V338 EGR servomotor V338Coolant feed lineCooled exhaust gases to turbocharger Exhaust intake from diesel particulate filterCoolant feed lineCooled exhaust gases to turbochargerCoolant return lineExhaust intake from diesel particulate filterDivider plate Condensate outlet608_040Engines in EU6, EU6 heavy duty and BIN5 configurations (low and high pressure exhaust gas recirculation)The EU6 version has low and high pressure exhaust gas recirculation systems with cooled and uncooled EGR valves and an EGR cooler in the low pressure exhaust gas recirculation system. The exhaust gases are recirculated in the same way as in EU5 engines. Uncooled exhaust gases from the high pressure exhaust gas recirculation system are fed in via a water-cooled EGR valve in the distributor rail at defined operating points.Water-cooled EGR valveThrottle valve608_048 29Exhaust manifold moduleThe exhaust manifold module consists of the exhaust manifold, the exhaust turbocharger integrated in the exhaust manifold, the low pressure exhaust gas recirculation intake and the baffled sound absorber. Use is made of an exhaust turbocharger with a pneumatically actuated Variable Turbine Geometry (VTG) and a position sensor. The recirculated exhaust gases are not extracted at the turbine housing, rather at the diesel particulate filter outlet. In the EU5 version, the full mass flow is always channeled through the turbocharger compressor by extracting the recirculated exhaust gases downstream of the diesel particulate filter outlet. The turbocharger can thus be operated with greater efficiency. This allows higher charge pressures and higher volumetric efficiency to be achieved at partial throttle in particular. A benefit of this is the higher cooling capacity of the exhaust gas recirculation system, which helps to reduce the mixing temperature of the fresh air and recirculated exhaust gases. The overall system was designed in such a way that the versions with high and low pressure exhaust gas recirculation in EU4 and EU6 configurations can be implemented modularly by modifying the compressor housing and the exhaust manifold. The acoustic characteristics of the exhaust turbocharger were improved by using modified damping chambers in the baffled sound absorber.Exhaust turbocharger module for longitudinal installationVacuum cellVacuum connectionIntake air from air filterVTG actuating leverIntegral insulationBlow-by gases of the positive crankcase ventilation systemExhaust manifold with integrated turbineTo intake manifold with integrated charge air coolerOil return lineHeater element for positive crankcase ventilation N79 (cold-climate countries only)from EGR cooler and EGR valveOil feed line608_07930Charge air coolerBy way of improvement, the water-cooled charge air cooler for diesel engines is integrated in the intake manifold as in the 1.4l TFSI petrol engines. The heat sink comprises the coolant plates, fins; top, base and side plates; and coolant connections. A separate low temperature coolant circuit equipped with and air-to-water heat exchanger provides demand-oriented charge air cooling in combination with a variable-speed electrical coolant pump. This has the following advantages: • As the intake manifold temperatures are adjustable within defined limits, the system can operate independently of the intake air temperature and the recirculated exhaust gas. • The result is a compact charge air circuit. • Flow losses are reduced. • Icing and condensation are avoided in the charge air cooler • Synergy is achieved in particular by using the charge air cooler as a high-performance low pressure exhaust gas recirculation and cooler system The charge air cooler integrated in the intake manifold is fully brazed and made of aluminium. The intake and exhaust boxes are subsequently welded to the heat sink. Coolant flows through the coolant plates in a W configuration according to the counterflow principle. Due to the special geometry of the coolant plates, the coolant flow is distributed across the width of the flat tube and simultaneously diverted. This makes for effective heat transfer from the aluminium panel to the coolant.DesignCharge air temperature sensor after charge air cooler G811Charge air cooler with coolant connections and W-shaped coolant platesConnecting flange to cylinder headCharge air temperature sensor before charge air cooler G810 Charge pressure sender connection G31Channel to charge air coolerThrottle valve connection608_019Note For information on the functioning of the low temperature coolant circuit, refer to p. 38 of this booklet.31Cooling systemThermal managementThe 1.6l/2.0l TDI engine has a thermal management system which is designed to shorten the warm-up phase after a cold start and channel the heat produced by the engine to where it can be advantageously utilised to boost vehicle efficiency. The focus here is on reducing intra-engine friction. Other goals are to ensure the early availability of emission reduction measures and to reduce the use of heating measures which impair fuel efficiency. The overall cooling circuit comprises three sub-circuits: • Secondary cooling circuit (micro circuit) • Cylinder head • EGR cooler of low pressure exhaust gas recirculation system • Heater heat exchanger • Electrical auxiliary coolant pump • Primary cooling circuit (high temperature circuit) • Cylinder block • Engine and gear oil cooler • Coolant thermostat (3/2-way valve) • Main radiator • Switchable coolant pump • Cooling circuit with charge air cooling (low temperature circuit) • Charge air cooler • Front radiator • Electrical auxiliary coolant pumpCylinder head coolant valve N489608_018Coolant pumpSwitchable coolant pumpA switchable coolant pump is used in the thermal management system for the 1.6/2.0l TDI engine. This coolant pump can be switched on and off, allowing coolant circulation to be stopped when the engine is cold. Static coolant heats up more quickly and can bring the engine up to operating temperature more effectively. A hydraulically actuated control valve (pot) activated by the cylinder head coolant valve N489 slides over the rotating impeller and prevents the coolant from circulating.Drive shaft Cylinder head coolant valve N489Annular pistonImpeller with integrated wobble plateControl valve (pot) BearingAxial-piston pump Guide bush with coolant ducts Annular piston ring sealsPump casingCompression spring for resetting the control valve Control valve seal608_02932Coolant pump functionThe control valve can slide hydraulically over the impeller, thus preventing coolant from being circulated. The impeller has an integral cast-in stainless steel plate which acts as a wobble plate.Cylinder head coolant valve N489 onStatic coolant An axial piston pump integrated in the pump casing is actuated by the wobble plate. The axial piston pump recirculates the coolant to the cooling circuit via the cylinder head coolant valve N489 through the lifting motion of the wobble plate. When the solenoid valve is energised, the return port to the coolant circuit closes. The lifting motion of the axial piston pump produces a hydraulic pressure at the annular piston. The control valve slides over the impeller against the force of a pressure spring and seals the impeller off from the cylinder block. No coolant is circulated.Control valve slid over the impeller Axial-piston pumpImpellerWobble plate with race for axial piston pump Annular piston displaced608_039Coolant is circulated If the solenoid valve is deenergised, the return port to the coolant circuit opens, and the annular piston is pushed back by the compression spring and restores the control valve to its original position. The impeller is again free and the coolant begins to circulate. The axial piston pump operates whenever the engine is running.Cylinder head coolant valve N489 offControl valve retractedReturn port open608_007 33System overviewThe following diagrams show the cooling system in the engine version which meets the EU5 exhaust emission standard.1235 46 7 891011 16121713141815608_073Key: 1 2 3 4 5 6 7 8 9 Coolant expansion tank Heater heat exchanger Auxiliary heater Recirculation pump V55 Heating assistance pump V488 Coolant temperature sender G62 Coolant socket EGR cooler Cylinder head coolant valve N489 10 11 12 13 14 15 16 17 18 Coolant thermostat Throttle valve Engine oil cooler Radiator fan V7 Radiator fan 2 V177 Radiator Charge air cooling pump V188 Charge air cooler integrated in intake manifold Radiator for charge air coolingCooled coolant Heated coolant34Secondary cooling circuit (micro circuit, heating circuit)If the engine is cold, the thermal management system is started in conjunction with the secondary cooling circuit, thereby ensuring that the engine and interior are heated quickly. The switchable coolant pump is activated via the cylinder head coolant valve N489. This stops the coolant from circulating in the engine block. The electrical heating assistance pump V488 initiates the secondary cooling circuit in a controlled manner, depending on the coolant temperature in the cylinder head. The driver's temperature preference is registered by the A/C control unit and taken into consideration when the coolant pump is activated.123546 8791011 16121713141815608_074Auxiliary heater operationThe auxiliary heater is integrated in-line with the heater heat exchanger without changeover valves. It has a separate circulation pump V55. The heating assistance pump V488 provides back-up in cold ambient conditions in order to ensure that a minimum volumetric flow is achieved at high coolant viscosity.35Secondary cooling circuit – engine cooling requirements / high engine loadThe switchable coolant pump is activated at increasing engine load and engine speed. This ensures that the engine is cooled. After the engine speed drops below a threshold level, the coolant pump is deactivated again and the engine is operated without coolant circulation until the required coolant temperature is achieved. The coolant pump is continuously activated when the coolant temperature exceeds a threshold level at the cylinder head, indicating that the engine is at operating temperature. When the coolant pump is activated, it is ensured that a sufficient quantity of coolant flows through the cylinder head. For this purpose, the engine has a thermostat with an integrated short circuit (refer to p. 39).123546 8791011 16121713141815608_075Key: 1 2 3 4 5 6 7 8 9 Coolant expansion tank Heater heat exchanger Auxiliary heater Recirculation pump V55 Heating assistance pump V488 Coolant temperature sender G62 Coolant socket EGR cooler Cylinder head coolant valve N489 Cooled coolant Heated coolant3610 11 12 13 14 15 16 17 18Coolant thermostat Throttle valve Engine oil cooler Radiator fan V7 Radiator fan 2 V177 Radiator Charge air cooling pump V188 Charge air cooler integrated in intake manifold Radiator for charge air coolingPrimary cooling circuit (high temperature circuit) – coolant at operating temperatureIf the coolant is at operating temperature, the coolant thermostat opens and enters control mode. The radiator (main radiator) is integrated in the cooling circuit. The coolant thermostat controls the engine outlet temperature and is located in the main radiator feed line.123546 7 891011 16121713141815608_07637Low temperature cooling circuit – coolant circuit for charge air coolingThe intake manifold temperature is used as a reference variable for activating the charge air cooling circuit. After this tagert temperature is achieved, the intake manifold temperature is regulated by activating the charge air cooling pump V188.123546 7 891011 16121713141815608_077Key: 1 2 3 4 5 6 7 8 9 Coolant expansion tank Heater heat exchanger Auxiliary heater Recirculation pump V55 Heating assistance pump V488 Coolant temperature sender G62 Coolant socket EGR cooler Cylinder head coolant valve N489 Cooled coolant Heated coolant3810 11 12 13 14 15 16 17 18Coolant thermostat Throttle valve Engine oil cooler Radiator fan V7 Radiator fan 2 V177 Radiator Charge air cooling pump V188 Charge air cooler integrated in intake manifold Radiator for charge air coolingCoolant thermostat as 3/2-way valveThe coolant thermostat is activated by an expanding wax element, which begins to close the secondary cooling circuit when operating temperature is reached. The primary cooling circuit is closed at the same time.Secondary cooling circuit (micro circuit)from cylinder blockis hereby entered into by and Connection to main radiatoropen: Short circuit to coolant pump608_005Primary cooling circuit (high temperature circuit, controlled)from cylinder blockopen: Connection to main radiatoris hereby entered into by and Short circuit to coolant pump608_006 39Fuel systemOverviewFuel pressure sensor G2471800/2000 barFuel metering valve N290approx. 0.4 – 1.0 bar High pressure pump CP4.1Fuel temperature sensor G81Non-return valve (throttle device)approx. 0 – 1.0 barapprox. 3.5 – 5.0 barto engine control unit J623Colour key: High fuel pressure 1800/2000 bar Fuel return pressure from the injectors 0.4 – 1.0 bar Fuel feed pressure (demand controlled) 3.5 – 5.0 bar40Battery (positive)Fuel filterFuel pressure regulating valve N276High pressure accumulator (rail)Injectors N30, N31, N32, N33Baffle housing GroundFuel pump control unit J538 (not in EU4 configuration)Fuel pump (pre-supply pump) G6 − with pressure limiting valve configured as a safety valve, which opens at approx. 6.6 bar in EU5/EU6 configuration − with working valve, which opens at 5.8 bar in EU4 configuration608_02841Exhaust systemLongitudinally mounted enginesOxidising catalytic converter Exhaust flap control unit J883Diesel particulate filter Flex tubeCentre silencerOxidising catalytic converterTransversely mounted enginesExhaust turbochargerExhaust manifoldEGR coolerDiesel particulate filterFlex tubeExhaust flap control unit J88342Baffled rear silencer608_044Baffled rear silencer608_050 43Engine management systemSystem overviewSensorsAir mass meter G70 Throttle valve potentiometer G69 Engine speed sender G28 Hall sender G40 Coolant temperature sender G62 Fuel temperature sender G81 Coolant temperature sender at radiator outlet G831) Oil level/oil temperature sensor G266 Fuel pressure sensor G247 Accelerator pedal sender G79 and accelerator pedal position sender G185 Exhaust gas recirculation potentiometer 2 G466 Charge pressure actuator position sensor G581 Brake light switch F brake pedal switch F63 Combustion chamber pressure sender for cylinder 3 G6791) NOx sender 2 G6871) Oxygen sensor G39 Charge air temperature sensor before charge air cooler G810 Charge air temperature sensor after charge air cooler G811 Private CAN bus NOx sender control unit 2 J8811) NOx sender control unit J5831)NOx sender G2951)Charge pressure actuator position sensor G581Oil pressure switch F22 Engine control unit J623Oil pressure switch for reduced oil pressure F378Exhaust gas temperature sender 3 (after cat) G495EGR temperature sensor G98 (EU4) Diagnostic port Exhaust gas temperature sender 1 G235Exhaust gas temperature sender 4 G648Charge pressure sensor G31 Differential pressure sender G505 Auxiliary signals: − Cruise control system − Speed signal − Start request to engine control unit (Kessy 1 + 2) − Terminal 50 − Crash signal from airbag control unit44ActuatorsInjectors, cylinders 1 – 4 N30, N31, N32, N33Automatic glow period control unit for J179 Glow plugs 1 – 4 Q10, Q11, Q12, Q13Oil pressure control valve N428Throttle valve control unit J338Fuel metering valve N290Fuel pressure regulating valve N276 Exhaust gas recirculation servomotor V338 (Low pressure exhaust gas recirculation) Exhaust gas recirculation servomotor 2 V339 (High pressure exhaust gas recirculation)Exhaust gas recirculation cooler change-over valve N345 (EU4)Cylinder head coolant valve N489Charge air cooling pump V188Charge pressure limitation solenoid valve N75Heating assistance pump V488Exhaust flap control unit J883Heater element for positive crankcase ventilation N79 (cold-climate countries only)Fuel pump control unit J538Oxygen sensor heater Z19Reduction agent metering system control unit J8801) Reduction agent injector N4741) Reduction agent line heater Z1041) Reduction agent pump V437 Reduction agent tank heater Z102 Fuel pump relay J17 Fuel predelivery pump G61)These components are for EU6 heavy duty and BIN5 configurations onlyAuxiliary signals: A/C compressor Auxiliary coolant heater Fan setting 1 + 2 Auxiliary air heater element Z35608_05845ServiceSpecial tools and workshop equipmentT10172 with T10172/11T10489608_071608_072608_064Tensioning the timing beltRemoving the high pressure pump drive gearT10490T10491608_066608_068Locking the crankshaft with round and oval chain sprocketsRemoving and fitting the oxygen sensorT10492T10493608_069608_070Locking the high pressure pump and camshaftFitting the camshaft seal46AnnexSelf Study ProgrammesYou will find further information on the technology of the 1.6l/2.0l TDI engine in the following Self Study Programme.608_081SSP 420 Audi 2.0l TDI Engine with Common Rail Injection System, order number: A08.5S00.45.2047All rights reserved. Technical specifications are subject to change. Copyright AUDI AG I/VK-35 service.training@audi.de AUDI AG D-85045 Ingolstadt Technical status 04/12 Printed in Germany A12.5S00.92.20608Audi Vorsprung durch Technik