TECHNICAL DOCUMENTATION

SSP 620 Audi ACC Systems

PDFEN44 pages6 MB
SSP 620 Audi ACC Systems - PDF cover

This PDF is currently unavailable.

Read document text
Self Study Programme 620 For internal use onlyAudi ACC SystemsAudi Service Training Adaptive Cruise Control (ACC) systemsRecent years have been characterised by rapid development in the field of driver assist systems. This has been made possible by technological progress, specifically in the development and production of electronic components. The complexity of available functions is also growing due to the shared use of subfunctions by various vehicle systems, as well as by increasing information exchange between vehicle systems. It is predicted that piloted driving will become a technical reality even during this decade. Adaptive Cruise Control (ACC) is one of the basic systems which laid the foundation for this development when it was first introduced on the Audi A8 in 2003. In the course of this evolutionary process, the range of functions of the ACC system has steadily grown and this system is today used in many current Audi models. Understanding the functional relationships between systems is a major challenge for service personnel. This knowledge is indispensable when it comes to explaining to customers how systems work and performing function tests as well as identifying, diagnosing and, ultimately, correcting faults. A self study program (SSP 289) was previously published when the ACC system was introduced on the Audi A8 in 2003. The range of functions of ACC has since been significantly extended by, in particular, including measured data provided by other sensors. Further system improvements have extended the system's limits and greatly increased system availability. This self study programme serves as an update to the existing SSP 289. It also provides an overview of the ACC systems used in current Audi models. Another key topic is the additional functions complementing the ACC basic function. In the area of service, special attention is given to the procedure for setting the current ACC systems with two radar sensors.620_0012 ContentsACC basic functionOverview ______________________________________________________________________________________________________________________________________________________ 4 Technische implementation - radar technology __________________________________________________________________________________________________________ 6 The distance measurement process _______________________________________________________________________________________________________________________ 6 Determining the speed of the vehicle ahead ______________________________________________________________________________________________________________ 8 Example showing how the speed and distance of the vehicle ahead are determined _ ________________________________________________________________ 9 Determining the position of the vehicle ahead __________________________________________________________________________________________________________ 10 Determining the vehicle relevant to ACC _________________________________________________________________________________________________________________ 11 Adaptive Cruise Control (ACC) - system limitations _____________________________________________________________________________________________________ 12Description of ACC systemACC options __________________________________________________________________________________________________________________________________________________ 13 System parameters _________________________________________________________________________________________________________________________________________ 14 System components ________________________________________________________________________________________________________________________________________ 16 Networking - data transfer _________________________________________________________________________________________________________________________________ 20Operation and driver informationACC on/off _ __________________________________________________________________________________________________________________________________________________ 22 Setting the target speed ___________________________________________________________________________________________________________________________________ 22 Setting the target distance_________________________________________________________________________________________________________________________________ 23 Setting the drive program __________________________________________________________________________________________________________________________________ 23 Setting the gong volume ___________________________________________________________________________________________________________________________________ 24 System status indication ___________________________________________________________________________________________________________________________________ 24 How the driver is prompted to take over _ ________________________________________________________________________________________________________________ 24 Basic operation ______________________________________________________________________________________________________________________________________________ 24ACC auxiliary functionsOverview _____________________________________________________________________________________________________________________________________________________ 25 Audi braking guard __________________________________________________________________________________________________________________________________________ 26 Evolution _____________________________________________________________________________________________________________________________________________________ 31 Audi Stop and go ____________________________________________________________________________________________________________________________________________ 32 Lane change assistance _ ____________________________________________________________________________________________________________________________________ 37Service operationsSensor vision _ ________________________________________________________________________________________________________________________________________________ 39 Replacement and removal/installation of the ACC sender with ACC control unit ___________________________________________________________________ 39 Calibrating the ACC sender _________________________________________________________________________________________________________________________________ 40• The Self Study Programme teaches a basic knowledge of the design and mode of operation of new models, new automotive components or new technologies. It is not a Repair Manual! Figures are given for explanatory purposes only and refer to the data valid at the time of preparation of the SSP. This content is not updated. For further information on maintenance and repair work, always refer to the current technical literature.!InformationReference3 ACC basic functionOverviewAdaptive Cruise Control is a systematic further development of the cruise control system first introduced on the Audi A8 in 2003. If the road ahead is clear, ACC acts in much the same way as a cruise control system by adjusting the speed of the vehicle to the target speed set by the driver. If it is not possible to travel at the desired speed due to a slower-moving vehicle ahead, ACC maintains the vehicle-to-vehicle distance set by the driver. The vehicle is, if necessary, decelerated by reducing engine power, by shifting down into a lower gear (on models with automatic transmission) and/or by applying corrective braking. In certain traffic situations, active braking of the vehicle by the driver is still required and indicated by audible and visual warnings.No vehicle in front: the vehicle travels at the desired speedTarget distanceVehicle ahead travelling slower than the desired speed: the desired vehicle-to-vehicle distance is maintained620_0024 To maintain a constant speed-dependent distance to a vehicle ahead driving in the relevant lane, the ACC control software requires the following information:Distance to vehicle ahead620_003Speed of vehicle ahead620_004Position of vehicle ahead620_005If there are multiple vehicles within the range of vision of the radar, the system utilises the above information to select the appropriate reference vehicle.620_0065 Technische implementation - radar technologyRadar technology is used to to implement the ACC basic function. Radar waves have advantages over optical systems due to their short wavelength. Radar waves are absorbed and deflected to a much lesser degree, especially in conditions of impaired visibility (fog, driving snow). As a result, the system provides higher availability than optical systems. Radio detecting and ranging (Radar) is an electronic process for determining the position of objects. The transmitted radar waves are reflected from suitable surfaces and objects.The time span between transmitting the signal and receiving the reflected signal is dependent on the distance from the object.The received waves reflected are correlated with the waves transmitted and evaluated.The distance measurement process ATransmitterReceiver50 mBTransmitterReceiver100 m620_008This example shows the dependence of signal travel time on the distance between the transmitter/receiver and object (see diagram): The vehicle-to-vehicle distance in case B is twice that in case A:In case B the time which elapses until the reflected signal reaches the receiver is twice that in case A.6 Direct travel time measurement is a highly complex process. For this reason, travel time is measured indirectly in the form of an FMCW (Frequency Modulated Continuous Wave) process. Continuously emitted ultra-high frequency oscillations with a time-variable frequency are used as a transmission signal.A carrier signal in the frequency band between 76 and 77 Gigahertz acts as a "vehicle". This process eliminates the need for complex direct travel time measurement. Instead, the more easily determinable frequency differences between the signal transmitted and the signal received (=reflected) are evaluated.FrequencyAATime± 200 MHz B BThe diagram shows the ± 200 Megahertz change in the frequency of the carrier signal due to frequency modulation.Frequency-modulated (FM) signalABABTimeWhile the amplitude (signal strength ) of the frequency-modulated signal stays almost constant, the frequency (number of oscillations per unit of time) changes. At the points in time marked A , the signal frequency in both diagrams has reached the maximum value (greatest number of oscillations per unit of time). At the points in time marked B, the signal frequency is at its lowest (least number of oscillations per unit of time).620_0097 Determining the speed of the vehicle aheadA physical phenomenon called the "Doppler shift" is utilised to determine the speed of the vehicle ahead. It makes a difference whether the object reflecting the transmitted waves is stationary or moving relative to the transmitter. If the distance between the transmitter and object decreases, the frequency of the waves reflected will increase. If the distance increases, the frequency will decrease. The frequency shift is evaluated by the electronics and indicates the speed of the vehicle ahead.Here is an example showing the effect of the Doppler shift:As the fire engine approaches, the observer hears a horn signal which has a more or less constant high pitch (high frequency). As the vehicle moves further away, the observer hears a lower pitched tone (transition to lower frequency).Pitch620_0108 Example showing how the speed and distance of the vehicle ahead are determinedThe vehicle ahead is driving faster and the vehicle-to-vehicle distance is increasing. The frequency of the signal received (reflected) decreases (D fD) due to the Doppler shift and is timeshifted on the basis of time elapsed between signals transmitted and received. This results in various differences in frequency between the rising (D f1) signal edge and the falling signal edge (D f2). This differential is evaluated by the control unit.Frequencyf1D fDRelative velocityD f1f2f4 D f2 f3620_011Signal transmitted Signal received/reflected9 Determining the position of the vehicle aheadThe radar signal propagates in a conical fashion. Signal strength (amplitude) decreases with increasing distance from the transmitter in the vehicle's longitudinal axis (x) and transverse axis (y).yxSignal strengthx, y620_012To determine the position, the angle at which the vehicle ahead is moving relative to one's self must be known. Transceiver units equipped with four transmittes/receivers are used in current Audi models to generate this information. The position of the vehicle ahead can be determined exactly by utilising the dependence of signal strength on the distance from the transmitter in combination with the four radar beams. The radar beams overlap one another on the periphery.In the diagram, the vehicle ahead is detected simultaneously by radar beams 2 and 3. If the vehicle in this example is to a greater extent located within the range of signal 2, the signal strengths (amplitudes) of signal 2 received (reflected) will be greater than those of signal 3 received. The relationship between the strengths (amplitudes) of the signals received from each of the radar beams indicates the angle.1234620_013 10 Determining the vehicle relevant to ACCIn actual traffic situations (e.g. on motorways and multi-lane roads or when cornering), it will often be the case that multiple vehicles are simultaneously within the detection range of the radar. In such situations, it is necessary to determine which vehicle is driving in the same lane and to identify the vehicle to which the selected distance is to be maintained. A prerequisite for this is that the course of the road ahead can be determined by the ACC control unit. This is a relatively complex process based on measurement data received from multiple sensors. The signals received from the steering angle sender, the yaw rate sender and the wheel speed sensor are utilised. Depending on the vehicle's specification, additional lane markings will also be identified by the camera. Crash barriers and lane marker posts detected by the radar and the direction of travel of other road users may also be used to determine the course of the road ahead. If the vehicle is equipped with Navigation +, this system's predictive route data is also used to determine the course of the road ahead (this applies to the A6, S6, RS6, A7, S7, RS7 and A8 models).620_014The ACC control unit determines this "fictitious" lane from the actual curve radius R of the ACC-equipped vehicle and a predetermined average lane width B.The nearest object (vehicle) to this lane is detected by the wheel sensor and identified as the relevant vehicle. If the conditions for ACC deployment are met, then the desired distance to this specific vehicle will be maintained.11 On winding roads or when entering or exiting curves, it may be the case that a vehicle is briefly "lost" or that a vehicle travelling in the adjacent lane is identified as the relevant vehicle.As a consequence of this, the vehicle may be briefly accelerated or braked by the ACC system. However, this is a relatively rare occurrence and is due to fact that the course of the road ahead cannot be clearly identified.Example The ACC-equipped blue vehicle is following the red vehicle travelling in the same lane. On entering a corner, the blue vehicle is now heading directly towards the oncoming green vehicle in the adjacent lane and may, in some situations, identify this as the reference vehicle. If so, this can lead to corrective adjustments which will seem illogical to the driver.620_015!Information This control behaviour is system-related and not the result of a system fault!Adaptive Cruise Control (ACC) - system limitations• ACC is a driver assist system and not a safety system. It is not designed for fully autonomous driving! ACC reduces the driver's workload, but it does not relieve the driver of his responsibility! • ACC operates within certain driving speed ranges only (depending on model). • ACC reacts to stationary objects. • The effectiveness of the radar technology and the other relevant sensors (video camera, ultrasound sensors) is limited by adverse ambient conditions (fog, drizzle, slush etc.). • Performance may be affected in small curve radii due to the restricted visual range of the radar. • When driving through tunnels, the radar beams may reflect off the tunnel walls. These reflections can potentially limit the performance of the ACC system.12 Description of ACC systemACC optionsThe following overview shows the current Audi models (model year 2013) in which ACC is optionally available. A variety of system configurations with model and country specific modifications are used. The A6, A7 and A8* models generally come equipped with two radar and transceiver units and two control units. An ACC system with a control unit incl. a radar unit is used in the A3, A4, A5, Q5 and Q7* models. In the case of the A3, A4, A5 and Q5* models, ACC is also available for vehicles with manual transmission. In these models, ACC is available in 2nd gear and higher. After selecting/changing gear and engaging the clutch, the accelerator does not have to be depressed in order to activate ACC. It is not possible to activate ACC while shifting gear. The ACC systems used on Audi vehicles are joint developments of AUDI AG and Robert Bosch AG. *: including S models and RS modelsModel A3, S3ACC version **A4, S4, RS4A5, S5, RS5A6, S6, RS6***A7, S7, RS7A8, S8Q5, SQ5Q7** ACC system with a control unit incl. a radar unit (right adaptive cruise control sender G259 and ACC control unit J428) *** ACC system with two control units incl. one radar unit each (right adaptive cruise control sender G259 and ACC control unit J428 - master left adaptive cruise control sender G258 and ACC control unit 2 J850 -slave-)620_017 13 System parametersKey system parameters for the functions of the ACC systems are compared below.1. Range and overlap angleThe range and overlap angle of the radar beams are dependent on the type and number of radar transceiver units. In the case of the A6, A7 and A8* models, the range at which the objects is still reliably detected is approximately 200 m. In the A3, A4, A5, Q5 and Q7* models, this range is approximately 180 m. The detection range starts approximately 0.5 m ahead of the vehicle. The current systems utilise transceiver units with four transmitters/receivers whose beams partially overlap.*: including S models and RS models620_018620_019Radar beams in vehicles with two transceiver units. (diagram of Audi A8 from model year 2010) The overlap angle has been substantially increased by the double radar concept. Even 30 m ahead of the vehicle, the detection range is already wider than a threelane motorway with a width of approximately 16 m.This enables ACC to detect in advance vehicles entering its own lane. ACC can, therefore, react proactively by initiating braking operations and/or issuing warnings.14 2. Control/speed rangeThe speed ranges within which ACC corrective adjustments are permitted are dependent on model and country of use. The following speeds ranges* apply to the individual models: A4, A5, Q5: ACC operates within the range from 30-200 kph. Restrictions apply in some countries (30-150 kph). A3: In this model, the speed range is dependent on the vehicle's equipment level. If the vehicle is equipped with the driver assistance package (including front camera for driver assistance systems R242), the speed range is also 30-200 kph. In vehicles equipped with automatic transmission, corrective adjustments are made as required until the vehicle comes to a stop. If the vehicle is not equipped with the driver assistance package, the speed range is 30-150 kph. Q7: ACC also operates within the speed range from 30-200 kph. Similarly, corrective adjustments are made as required until the vehicle comes to a stop. A6, A7, A8: The control range is 30-250 kph. Similarly, ACC makes corrective adjustments as required until the vehicle comes to a stop. Restrictions apply in some countries (30-150 kph). *: including S models and RS models620_020620_0233. Object detectionThe following rules regarding object detection by the radar sensors apply to all ACC systems used in Audi models: ACC reacts to objects which are moving or those which have already been identified as moving objects. Although the system detects stationary objects, its does not normally react to stationary vehicles, persons, animals or oncoming traffic. However, there are additional ACC functions which also factor stationary objects into their corrective calculations. An example of this is the Stop and go function which detects obstacles between a stationary ACC-controlled vehicle and a stationary vehicle ahead. In these cases, the automatic start process is modified accordingly or is entirely suppressed after the vehicle ahead drives away (see chapter on Stop and go function). In these cases, the detection of stationary objects at close range is assisted by additional sensors (camera, unltrasound sensors).620_023a15 System componentsVehicle overviewThe diagram shows the Audi A8 together with all the control units involved in ACC control operations. These highly complex control operations involve 26 control units which exchange some 1600 units of information.J104J623J387J794J852J855G85J428 J743J850J519J851J386J52716 J389J197J393J769J773 J533J770 J345J540 J234 J388J854620_021G85 J104 J197 J234 J345 J386 J387 J388 J389 J393 J428 J519 J527 Steering angle sender ABS control unit Adaptive suspension control unit Airbag control unit Trailer detector control unit Driver's side door control unit Door control unit, front passenger side Door control unit, rear left Door control unit, rear right Convenience system central control unit ACC control unit Onboard power supply control unit Steering column electronics control unitJ533 J540 J623 J743 J769 J770 J773 J794 J850 J851 J852 J854 J855 Data bus diagnostic interface Electromechanical park and handbrake control unit Engine management control unit Mechatronics control unit Lane change assist control unit Audi side assist control unit 2 Convenience system central control unit 2 Information electronics control unit ACC control unit 2 Image processing control unit Camera control unit Front left seat belt tensioner control unit Front right seat belt tensioner control unit17 ADR sender, right G259 and ACC control unit J428* Left adaptive cruise control sender G258 and ACC control unit 2 J850 **Mounting bracketLayout:The sender (radar transceiver) and control unit are installed in a common housing (referred to hereinafter as the ACC unit). The parts cannot be separated from one another and, if faulty, can only be replaced as a complete unit at service centres. The unit is mounted adjustably to a bracket and can be bolted to the vehicle (bumper) along with the bracket. A resistance heating wire is integrated in the lenticular cover. *: Fitted in all vehicles with ACC **: Only fitted in A6, S6, RS6, A7, S7, RS7, A8 and S8 models620_025Lens with integrated heater ACC senderFunction:The four radar sensors transmit continuous radar waves which are bundled by the lenticular cover. In most driving situations the integrated electrical heater prevents the build-up of snow and ice, which have the effect of attenuating the radar signals. The radar signals received are evaluated by the control unit. Basic function: If the need for corrective action is detected, the desired distance to a vehicle ahead is achieved by braking or accelerating. The following functions are utilised for this purpose: • Active braking operations are initiated (by the ESC control unit - or, in the Audi Q7, by the active brake servo). • Engine torque is reduced or increased as required. • In vehicles with automatic transmission, gearshifts are initiated or suppressed. Additional functions: The additional functions are described in detail in the following chapters.620_02618 The ACC control unit uses data bus systems to communicate with the other control units. For this purpose, the ACC control unit is connected to the data bus diagnostic interface (J533) by a special data bus.A master/slave configuration is implemented for ACC systems with two transceiver units and two control units. Control unit J428 acts as the master and control unit J850 as the slave.620_027ADR sender, right G259 and ACC control unit J428 (master)Left adaptive cruise control sender G258 and ACC control unit 2 J850 (slave)ACC button E357The stalk is located on the left-hand side of the steering column. The switch positions are read in by the ACC control unit and the corresponding system responses/settings are initiated.620_023b19 Networking - data transferThe overview shows the system components which serve as as sensors and actuators for the ACC in the Audi A6, S6, RS6, A7, S7, RS7, A8 and S8 models. The key information received and transmitted by these components is summarised in note form under each component designation.Park assist steering control unit J791 −− Front-side object detection Instrument panel control unit J285 −− Displays Steering column electronics control unit J527 −− Operation (stalk signals)Onboard power supply control unit J519 −− Ambient temperature −− Windscreen wiper actuationData bus diagnostic interface J533Convenience system central control unit J393 −− Key operationEngine management control unit J623 −− Implementation of acceleration/decelerationTrailer detector control unit J345Heater Selector lever sensors J587 −− Selector lever positionDoor control unit, driver side J386 −− Door contacts −− BonnetGearbox control unit J217 −− GearshiftsFront passenger door control unit J387Electromechanical park and handbrake control unit J540 −− Stop managementRear left door control unit J388Steering angle sender G85 −− Measured value for steering angleRear right door control unit J389Airbag control unit J234 −− Crash status −− Seat belt buckle status20 Information electronics control unit 1, J794 −− Settings −− Navigation informationACC control unit J428 −− Right wheel data: −− ACC master functionImage processing control unit J851 −− Front-side object detectionACC control unit 2 J850 −− Left wheel data: −− ACC slave functionAdaptive suspension control unit J197 −− Damper adjustment for automatic emergency brakingControl unit for sensor electronics J849 −− Vehicle movement data (yaw rate, transverse acceleration, longitudinal acceleration)ABS control unit J104 −− Implementation of vehicle decelerationCamera control unit J852 −− Vehicle lane data/courseControl unit for front right seat belt tensioner J855 −− Belt tensioningControl unit for front left seat belt tensioner J854 −− Belt tensioningAudi side assist control unit J769 −− Rear-side object detectionDisplay and operation CAN bus Convenience CAN bus MOST bus Powertrain CAN bus FlexRay Extended CAN bus620_028 21Audi side assist control unit 2 J770 Operation and driver informationThis chapter covers the main aspects regarding operation of the ACC systems and driver information displayed by the ACC systems. This information is provided to give a better understanding of the system as a whole and is no substitute for the Owner's Manual! Detailed information can be found in the Owner's Manual for each individual model. The main operating functions are integrated in the stalk (ACC button E357).620_024ACC on/offThe stalk has two locking positions. ACC is generally activated by pulling the stalk towards the driver into the ON position. ACC is deactivated by moving the stalk away from the driver into the OFF position. After starting the engine, ACC will, depending on the position of the stalk, either be in READY mode (stalk in ON position) or in OFF mode (stalk in OFF position). After ACC is activated using the stalk, the system will also be in READY mode. Once the target speed has been set, ACC enters ACTIVE mode and corrective adjustments are made as required.ACC OFF620_029When ACC is switched on, Electronic Stability Control (ESC) and Electronic Traction Control are automatically activated if they have previously been deactivated by the driver. Both systems cannot be deactivated when ACC is switched on.ACC ONSetting the target speedThe current vehicle speed can be stored as a target speed by pressing the SET button. A target speed can generally be set within the given speed control ranges if the vehicle is travelling at 30 kph or faster (see page 15). In vehicles equipped with the Stop and go function, a target speed can be set even when travelling slower than 30 kph. The vehicle is then accelerated up to 30 kph and the target speed is set. If the SET button is pressed in vehicles equipped with two ACC units (see page 13) while travelling at speeds of greater than 250 kph, the vehicle is decelerated to 250 kph and then the target speed is set. The target speed can be increased by moving the stalk up and reduced by moving the stalk down (in increments of 5 or 10 kph).Increase speed620_030Reduce speed Set speedThe actual target speed is indicated by LEDs in the speedometer and briefly in the info line on the centre display after pressing the SET button.620_03122 Setting the target distanceThe desired distance to a vehicle ahead can be set in four stages using the paddle. The factory default is distance setting 3. The distance regulated by ACC is dependent on the speed at which the vehicle is travelling. Vehicle-to-vehicle distance is increased with increasing speed. The regulated distance is therefore not so much constant distance as a time-constant distance. The current distance setting is indicated on the centre display. 2 1620_0321 = reduce distance 2 = increase distanceDistance 1Distance 2Distance 3Distance 4Time interval 1.0 sTime interval 1.3 sTime interval 1.8 s "Half speed indicated"Time interval 2.3 sSetting the drive programIn vehicles equipped with "Audi drive select", the drive program is selected in "Audi drive select" and otherwise in the radio/MMI. By selecting a certain drive program/driving mode, the driver can influence the vehicle's acceleration and follow-up response during ACC operation. The "comfort", "auto", "dynamic", "efficiency" and "individual" settings can be selected. If a larger distance is selected, the acceleration response will automatically be more comfortable. The highest rate of acceleration is therefore achieved by selecting distance 1 plus the "dynamic" drive program and the lowest (most comfortable) by selecting distance 4 plus "comfort". If "efficiency" is selected, the vehicle will be programmed for maximum fuel economy with a relatively comfortable acceleration response. If "individual" is selected, the acceleration response can be freely selected by the driver in combination with other possible system setups (engine, gearbox, steering etc.).Raise Audi drive select Handbookefficiency comfort auto dynamicindividualCar systemsSet individual620_033Raise Engine / gearbox Air spring Steering Seat belt tensionersAudi drive selectHandbook comfort auto comfort auto dynamicAdaptive cruise controlCar systemsSet individual620_033a23 Setting the gong volumeVarious system states are indicated to the driver audibly and visually by a gong signal. In the A3, Q3, Q5, Q7 and A4/A5* models, gong volume can be adapted to the driver input in the radio/MMI. The "low", "medium" and "high" volume settings are available for this purpose. The audible signal can be muted by activating the "off" setting. Even is the gong is switched off, for functional reasons not every gong signal is deactivated. In the current A6, A7 and A8* models, gong volume is adapted automatically.*: including S models and RS modelsSystem status indicationThe system status is indicated to the driver by indicator lamps and via the centre display of the dash panel insert. The actual target speed is indicated by the LED ring in the speedometer. Refer to the Owner's Manual for details of possible displays.Distance 2 - dynamic620_034How the driver is prompted to take overTo avoid unsettling the driver and for comfort reasons, the maximum rate of brake deceleration usable to achieve the desired vehicle-to-vehicle distance during automatic braking cycles is limited to approximately 40 % of the maximum achievable rate of brake deceleration in the ACC basic function. In certain situations, this rate of brake deceleration will not be sufficient to achieve this distance. In these cases, the driver must actively "assist". The driver is prompted by audible and visual warnings to apply the brake.DISTANCE!Basic operationACC is a driver assistance system. It was developed in order to relieve the strain on the driver. Nevertheless the driver can exert influence on the system at any time. Active ACC corrective processes can be cancelled by applying the brakes. Similarly, the speed and acceleration set by ACC can be increased by applying more throttle.620_03524 ACC auxiliary functionsOverviewACC provides other auxiliary functions in addition to the basic function. The range of functions is dependent on model and country of use, and to a certain extent is tied to specific vehicle equipment. Function Audi braking guard* Audi braking guard* with automatic emergency braking Stop and go AvailabilityQ7 A3, S3, A4, S4, A5, S5, A6, S6, RS6 A7, S7, RS7 A8, S8, Q5, SQ5 A3, S3, A6, S6, RS6, A7, S7, RS7, A8, S8 In the Audi A3, the functions of Audi braking guard are integrated in Audi pre sense. With start-off monitoring and 15 s drive-away readiness** in the A6, S6, RS6, A7, S7, RS7, A8 and S8, as well as 3 s drive-away readiness in the A3 and S3.RemarksFull deceleration at low speeds Overtaking assistance Cornerning assistance Overtaking prevention in right driving lane Lane change assistance Boost functionA3, S3, A4, S4, A5, S5, A6, S6, RS6, A7, S7, RS7, A8, S8, Q5, SQ5 A3, S3, A4, S4, A5, S5, A6, S6, RS6, A7, S7, RS7, A8, S8, Q5, SQ5, Q7 A6, S6, RS6, A7, S7, RS7, A8, S8 A3, S3, A4, S4, A5, S5, A6, S6, RS6, A7, S7, RS7 A8, S8, Q5, SQ5 A6, S6, RS6, A7, S7, RS7, A8, S8 A3, S3, A6, S6, RS6, A7, S7, RS7, A8, S8 Audi **: The duration of start-off readiness can be extended in the Audi A3, S3, A6, S6, RS6, A7, S7, RS7, A8 and S8 models by pressing the stalk (see page 33/34).*: In future, the Audi braking guard functions in all models will be subfunctions of Audi pre sense.Typical applications of Stop and go functions are tailbacks and slow-moving lines of traffic.620_03725 Audi braking guardAudi braking guard alerts the driver to hazard situations. Typical causes of such hazard situations are sudden heavy braking of the vehicle ahead or if one's own vehicle approaches a much slowermoving vehicle ahead at high speed. Failure to observe the necessary minimum distance to a vehicle ahead is potentially very hazardous. Audi braking guard active even if ACC has not been activated or is switched off. Audi braking guard was implemented for the first time in an Audi A6 in 2005. A hazardous situation is detected on the basis of radar signals. If the vehicle is equipped with the front camera for driver assistance systems R242 (implemented in the A3, S3, A6, S6, RS6, A7, S7, RS7, A8 and S8 models), allowance is also made for video information when evaluating the hazard potential of a driving situation.620_036Audi braking guard subsequently implements the two warning concepts explained below.1. Distance warningBy evaluating the radar signals, Audi braking guard detects that for a lengthy period of time the distance to a vehicle ahead is very short (less than the distance realised after selecting distance 1). In this case, heavy braking by the vehicle ahead could result in a collision. Audi braking guard assists the driver in this situation by issuing a warning. A red-flashing warning lamp is activated in the display.620_03926 2. Forward collision warning (pre-warning)The forward collision warning is activated when the distance to a vehicle ahead decreases so rapidly that a collison can only be avoided by taking evasive action or by applying heavy braking outside the comfort zone. The driver must take immediate action. In accordance with the high hazard potential of the situation, warnings are issued visually by a warning lamp and in the centre display, and audibly by a gong signal. DISTANCE!620_035In these situations, it is important that the driver actively apply the brakes in order to achieve high braking power ( 40 % of maximum deceleration). If the driver does not react to the warning, the ACC control unit initiates a short-term build-up of brake pressure through the ESP control unit shortly before the last braking opportunity to a avoid collision.This warning jerk can be clearly felt by the driver does not serve to decelerate the vehicle but rather to again warn the driver that immediate action must be taken to avoid an imminent collision.Vt+ gong Pre-warning Acute warning by brake jerk Preceding vehicle brakes heavily - e.g. at the end of a tailback620_041!Information Audi braking guard is active even if ACC is switched off.27 If the driver does not respond to the acute warning (brake jerk), the system assists by automatically initiating braking intervention. In this section, the system responses ranging from a warning to automatic emergency braking are shown in time sequence (phases 1-4).In this example, an Audi A8 equipped with AAC and Audi pre sense plus is approaching a much slower-moving truck. The other pre sense functions (e.g. belt tensioners) mentioned in the given example of the Audi A8 are dependent on the application in each vehicle model.620_040Phase 1The braking guard logic in the ACC control unit has detected an increased collision risk and issues audible and visual warnings to alert the driver. This warning is given if it is no longer possible to brake comfortably or take evasive action to avoid a collision. When exactly the warning is triggered depends on the driver's driving style. Investigations have shown that the driving style also characterises the degree of driver alertness. For example, a dynamic driving style characterised by frequent acceleration/deceleration and lane changes generally infers an alert driver. The warning is then triggered later than for a less alert driver. At this point, the ESC system is instructed to pre-charge the brake system with approximately 2 bar of brake pressure through the active build-up of brake pressure. The purpose of this measure is to reduce the delay times in the brake system in case braking is subsequently applied. This measure initiates the cleaning/drying of the brake discs by applying the brake pads against the brake discs. This function is similar to the "brake disc wiper" function of the ESC control unit. At the same time, the triggering criteria for the Hydraulic Brake Assist (HBA) are changed depending on the traffic situation around the vehicle. Due to the high hazard potential of this situation, HBA now deploys at lower brake pedal travel speeds. To be best prepared for any imminent dynamic actions (evasion, braking with high vehicle deceleration), the sdaptive air suspension (aas) sets the dampers to maximum damping force.DISTANCE!620_035620_04228 Phase 2If the driver does not react to the pre-warning, the ACC control unit initiates a short-term brake pressure build-up (which is felt by the driver as clear brake jerk) before the last braking opportunity to avoid a collision. The sole purpose of this brake jerk is to again urgently warn the driver that it is necessary to take immediate action (evasive action, braking). If the driver thereupon initiates emergency braking by rapidly depressing the brake pedal, he will, if necessary, be assisted by Hydraulic Brake Assist (HBA). The response thresholds of HBA have already been lowered during phase 1 depending on the hazard potential of the situation. If the driver but does not apply sufficient foot pressure to the brake pedal to achieve the necessary rate of deceleration calculated by the system, ESC will initiate additional brake pressure as required. The built-up braking pressure either stops the vehicle a short distance behind the vehicle ahead or vehicle speed is reduced to such an extent that it can safely follow the preceding vehicle. Depending on road conditions, maximum deceleration values are initiated if necessary.• Brake jerk • Partial braking (approximately 30 %) • Seat belt slack reduction620_043If the driver does not respond to the brake jerk by applying the brake, ACC will initiate automatic braking through ESC. The first phase of brake pressure build-up begins with medium deceleration (approximately 30 % of maximum deceleration for approximately1.5 s). Seat belt slack is reduced at the start of the automatic braking operation by Audi pre sense in order to effectively restrain the driver.The following phases 3 and 4 are initiated only in vehicles equipped with Audi side assist (which becomes Audi pre sense plus when combined with ACC). The driver can cancel the corresponding function any time by firmly depressing the brake or accelerator pedal or by taking evasive action.Phase 3Brake pressure is reduced to approximately 50 % of maximum deceleration by ESC. Following traffic is alerted to the hazard situation by emergency flashers. Given the high likelihood of a collision, open windows/sunroof are closed as far as possible by Audi pre sense. The object is to increase the stability of the passenger cell and protect the occupants from object intrusion.• Partial braking (approximately 50 %) • Closing windows/sunroof • Hazard warning flashing620_04429 Phase 4If the driver still fails to take action and a collision at a high residual speed can no longer be avoided, the brake pressure will again be increased to the maximum rate of deceleration shortly before the calculated point of impact. Audi pre sense additionally activates the belt tensioners. The collision can no longer be prevented by the driver but the collision speed can be reduced by up to about 12 kph by applying maximum braking power. Even if the driver takes no evasive action, Audi braking guard can reduce the impact speed by up to 40 kph. The accident cannot be prevented without intervention by the driver, but its severity is significantly reduced by Audi braking guard. • Emergency braking • Seat belt pretensioner activation620_045Unlike the ACC basic function, Audi braking guard also reacts to stationary targets. In these cases, the driver is alerted by audible and visual warnings and, if necessary, by a warning jerk as described. However, automatic braking is not performed at speeds above 30 kph. Depending on model, the "full deceleration at low speeds" function is activated at speeds below 30 kph (see overview on page 25).Audi braking guard can be deactivated by the driver as a complete system. Alternatively, it is possible to deactivate only the distance and collision warning functions. When ESC sport mode or offroad mode is activated, Audi braking guard is also deactivated.Raise Driver assist System Pre-warning Audi braking guardHandbookOn OnCar systems Set individual620_046In the Audi A3 from model year 2013 and later, the Audi braking guard functions are included in the functional range of Audi pre sense. This concept will in future be implemented in all Audi models. As with Audi braking guard, it is possible to deactivate Audi pre sense as a complete system or to deactivate the distance and collision warning functions only. The Audi pre sense functions are partially deactivated when ESC sport mode is activated (or the Offroad mode in later Q models).Car Audi pre sense System Pre-warningHandbookCAR systems620_04730 EvolutionThe Audi braking guard function has grown in complexity over the course of its evolution. The following chapter shows the developmental phases and functions of Audi braking guard in chronological order.Audi braking guard 1 Installed in A6 from MY 2005 − Pre-charging of the brake system by ESC in the event of a collision hazard − without warning the driver − Reduction of intervention threshold of Hydraulic Brake Assist (HBA)Audi braking guard 2 with pre sense front/plus Installed in A8 from MY 2010 A6 and A7 from MY 2011 − Pre-charging of the brake system by ESC in the event of a collision hazard − Distance warning by warning lamp − Audible and visual collision warnings − Acute warning by brake jerk − Automatic partial braking if driver ignores warnings − Automatic emergency braking shortly before collision (only if vehicle is equipped with pre sense rear) − Reduced intervention threshold of Hydraulic Brake Assist (HBA)20052010201320072012Model yearAudi braking guard 2 Installed in Q7 and A5 from MY 2007 A4 and Q5 from MY 2008 − Pre-charging of the brake system by ESC in the event of a collision hazard − Distance warning by warning lamp − Audible and visual collision warnings − Acute warning by brake jerk − Reduced intervention threshold of Hydraulic Brake Assist (HBA)Audi braking guard 2 with pre sense and maximum deceleration at low speeds Installed in A4, A5, A6, A7 and A8 (phased in from MY 2012) A3 and Q5 from MY 2013 and later − Functions such as Audi braking guard 2 with pre sense front/ plus − Automatic emergency braking at speeds of less than 30 kph31 Audi Stop and goIn the current Audi A3, S3, A6, S6, RS6, A7, S7, RS7, A8 and S8 models, the Stop and go function is implemented on vehicles equipped with ACC. As previously with ACC in the Q7, the above vehicles also brake to a stop automatically. A precondition for this is that the vehicle ahead was moving before it came to a stop. Targets that are stationary at the point of detection are not included in the control function (e.g. parked vehicles). If ACC registers that the vehicle ahead has come to a stop, the ACC-equipped vehicle is also automatically braked to a stop without any action on the part of the driver. The rate of deceleration is dependent on the vehicle speed. At vehicle speeds of less than 50 kph, the maximum rate of deceleration is approximately 4 m/s2. The last 2-3 m before the vehicle comes to a stop are covered by "crawling" at a speed of approximately 2 kph. The stopping distance to the vehicle ahead is approximately 3.5 - 4 m. If the vehicle ahead starts off again after stopping briefly, the ACC-equipped vehicle will also accelerate and follow. The braking operations necessary to implement this function are performed by the "brake pressure build-up" function of the ESC. The duration of start-off readiness is model-dependent and can be extended by a set amount using the stalk (RESUME position).620_049620_023bIf ACC has brought the vehicle to a stop by an active braking operation, the electrical parking brake is automatically activated and ACC is deactivated in the following situations: • The vehicle is stationary for longer than 3 min • Opening the driver's door • System fault • In the case of the Audi A3 and S3 models, ACC is deactivated if the driver's seat belt is unfastened while the vehicle is stationary. In the case of the Audi A6, S6, RS6, A7, S7, RS7, A8 and S8 models, the vehicle will no longer start off automatically.620_050!32Information In certain markets (e.g., USA) ), the vehicle executes a "stop" but does not automatically "go". To move off again, the driver must activate ACC with the stalk (RESUME) or by depressing the accelerator. ACC-equipped vehicle starts off automatically Preceding vehicle starts off again Driver operates stalk ACC-equipped vehicle brakes to standstill Preceding vehicle stopsPreceding vehicle State VehiclesStationary MovingACC-equipped vehicleStationary MovingACC systemStateACC ready Not ready Max. duration 15 sOperationRESUMEOperated Not operatedDisplaysTextACC: ready No display Shown Not shownACC symbolExample showing the time sequence of the control operations of an Audi A8 in Stop and go mode.Time t620_051ACC READY is indicated to the driver in the central display. The precondition for starting off is that the driver has fastened his seat belt. In certain markets, the automatic start-off function is realised without the described option of extending the READY period with the stalk.Distance 2 - dynamic ACC: rreadyready620_03833 Start-off monitoring in Audi A6, S6, RS6, A7, S7, RS7, A8 and S8Before the ACC-equipped vehicle starts off automatically, the ACC scans the area between the ACC-equipped vehicle and the vehicle ahead. Audible and visual warnings are given if an obstacle is detected. The vehicle nevertheless commences the drive-away cycle, but starts off but very slowly. This gives the driver sufficient time to respond by braking or taking evasive action. The area in front of the vehicle is monitored by three independent systems: the radar sensors, video camera R242 and the ultrasonic sensors of the parking aid. If the vehicle is equipped with ACC, the ultrasonic sensors are operated in a different mode so that objects are still detected at a distance of approximately 4 m. If the signal from the video camera or the ultrasonic sensors is unavailable, the vehicle will always start off automatically at a reduced rate of acceleration. Automatic start-off is suppressed if both signals are unavailable. The system is then deactivated and the driver is requested to take over.620_053In the Audi A3 and S3, drive-away readiness is limited by "RESUME" to 3 s (in the Audi A6, S6, RS6, A7, S7, RS7, A8 and S8, this is 15 s). Because this duration is so short, the Audi A3 and S3 models do not have a special start-off monitoring function.Hill Start Assist in combination with Audi Stop and goStop and go can also be combined with Hill Start Assist. The drive assist function can be activated/deactivated independently of the ACC at any time. If Hill Start Assist and Audi Stop and go are active while the vehicle is stationary, the Hill Start assist function will switch passively into the background (comparable to "standby" mode). If ACC is switched off while the vehicle is stationary and Hill Start Assist is on, Hill Start Assist is re-activated and holds the vehicle stationary.620_054!34Information Automatic restarting can be deactivated using the diagnostic tester. Full deceleration at low speedsThis function was first introduced in the Audi A4, A7 and A8 models from model year 2012. The vehicle is braked automatically when a risk of collision exists at low vehicle speeds under 30 kph. The data collected by the ACC is the basis for detection of the collision risk. In the case of the A6, S6, RS6, A7, S7, RS7, A8 and S8 models, the video information from camera R242 is factored in when evaluating the hazard potential. This assessment is made by specific software on the ACC control unit. The control unit then "instructs" the ESC control unit to brake the vehicle by indicating a nominal rate of deceleration (approximately -8 m/s2). The ESC control unit then initiates the build-up of brake pressure at all four wheel brakes.Overtaking assistanceThis function facilitates rapid overtaking manoeuvres. When a turn signal is activated, the ACC interprets that the driver wishes to overtake. The vehicle is then accelerated before leaving its lane and until the overtaking maneouvre is complete. This is essentially how a driver would behave during "normal" driving. The function is activated in a situation-dependent way.620_055620_056Cornerning assistanceACC utilises the predictive route data of the navigation system to perform this function. If a corner is detected in the road ahead, ACC computes the speed at which this corner can be safely taken. Cornering assist will be activated if the vehicle's current speed exceeds the nominal speed computed by ACC. The vehicle's speed is reduced by up to 10-15 kph on entering the corner by reducing the drive torque (utilisation of engine drag torque).Control behaviour when corneringIf ACC detects that a vehicle's transverse acceleration exceeds a calculated nominal value, the vehicle's speed is reduced accordingly. In this example, the set target speed is 120 kph and the vehicle takes a corner with a clear road ahead, i.e. the vehicle does not have to maintain a target distance to a slower-moving vehicle ahead. While the vehicle is rounding the corner, the ACC control unit computes a nominal speed of 110 kph based on the measured transverse acceleration. The vehicle's speed is then limited to110 kph by reducing the drive torque. Allowance if made for trailer operation and the selected driving program when determining the nominal speed.620_057620_05235 Overtaking prevention in right driving laneIf ACC mode is active and the road ahead is clear, overtaking/ passing in the right driving lane is only possible without restrictions up to a defined vehicle speed. It is only possible to pass a vehicle at a limited relative speed of approx 10 kph. The function is now active and does not allow overtaking/passing in the right lane. The active function can be cancelled at any time by accelerating manually with the stalk (RESUME), by depressing the accelerator pedal or by increasing the set speed.Driving speedV2V1620_058Unrestricted overtaking on the right (up to speed V1) Overtaking on the right is only possible at a limited relative speed (up to speed V2) Overtaking on the right is not possible (at speed V2 or higher)620_059 36 Lane change assistanceTo realise this function, the vehicle must be equipped with Audi side assist and camera R242. Braking intervention is adapted to the following traffic and the oncoming traffic in the overtaking lane. The camera detects the lane markings. Two typical driving situations will now be used to explain how ACC works.620_060Driving situation 1The ACC-equipped vehicle is rapidly approaching a slower-moving vehicle ahead and the driver operates the turn signal to indicate that he wishes to change lane. The rear radar sensor indicates to Audi side assist that the left lane behind the vehicle is clear. Also, ACC detects no vehicle in the left lane ahead of the ACC-equipped vehicle. The camera identifies the broken lane markings. ACC derives the following information from the input signals: • It is safe to overtake because there is no subsequent traffic in the left lane. • The lane change can be performed without reducing speed because there is no other vehicle ahead in the overtaking lane. • Broken lane markings mean overtaking is permitted. There is a high likelihood that the driver will perform the overtaking manoeuvre. When the set target distance is achieved, ACC does not brake the vehicle to the speed which it would otherwise set when following a vehicle in front without performing an overtaking manoeuvre. This means that the lane change can be performed much more smoothly and comfortably.37 Driving situation 2The ACC-equipped vehicle is rapidly approaching a slower-moving vehicle ahead and the driver operates the turn signals to indicate that he wishes to change lane. The rear radar sensor indicates to Audi side assist that the left lane behind the vehicle is busy. ACC also detects a vehicle in the left lane ahead of the ACC-equipped vehicle. The camera identifies the broken lane markings. ACC derives the following information from the input signals: • It is only to a limited degree safe to overtake because there is subsequent traffic in the left lane. • The lane change cannot be performed without reducing speed because there is another vehicle ahead in the overtaking lane. • Broken lane markings mean overtaking is permitted. There is a high likelihood that the driver will perform the overtaking manoeuvre. When the set target distance is achieved, ACC brakes the vehicle to a lower speed than in the above example. The speeds of the vehicles driving in the left lane are taken into account when determining the required amount of corrective braking.620_061If the camera detects solid lane markings, a lane change is assessed as improbable and the braking interventions are executed as they would be when driving in lane without changing lane.Boost functionThe boost function enables the driver to increase the driving speed currently set by ACC without having to deactivate ACC. This is achieved by depressing the accelerator pedal or by pulling the stalk. If the boost function is no longer required, ACC slows down again to the originally set speed.620_06338 Service operationsThe most common service operations are briefly explained in this chapter. The ACC systems (ADR sender, right G259 and ACC control unit J428/left adaptive cruise control sender G258 and ACC control unit 2 J850) have full self-diagnostic capability. Detected events are stored in the vehicle's event memory at diagnosis address 13 / 8B together with details of the ambient conditions in each case. Corresponding fault finding programs are linked to the entries in the event memory.Sensor visionDespite the "robust" propagation characteristics of the radar beam, ACC may be deactivated due to impaired conditions of "visibility". This can happen for various reasons. • The propagation of the radar beam is significantly impaired by the weather conditions. This is possible in spray, fog and snow. This can only be remedied by an improvement in the weather conditions. • The lens on the radar sensor is dirty. After the lens has been cleaned, ACC will again be available. Commercially available cleaning agents can generally be used for cleaning all motor vehicles. • The vehicle is operated in a region where very few objects are definable by the ACC as targets. This is rarely the case, e.g. when driving through desert-like regions. • When passing through tunnels, signal reflection off the tunnel walls may lead to deactivation of the ACC.ACC and Audi braking guard: currently unavailable No sensor vision620_064Replacement and removal/installation of the ACC sender with ACC control unitIn the event of a fault in the sender or control unit, the complete ACC unit must always be replaced. It is not permitted to separate both components. It is necessary to calibrate the sender after installing the ACC unit.620_025!Information It is important that basic setting of the stud length be correctly performed prior to installation of the ACC unit. Refer to the workshop manual for detailed information.39 Calibrating the ACC senderTo ensure precise operation, the sender(s) must be exactly calibrated. Only then can a vehicle driving ahead in the same lane be identified as a relevant vehicle. If the sender is not set precisely in the horizontal direction, the system may incorrectly react to vehicles driving in the adjacent lanes.620_066The bumpers of the Audi A8 have been replaced. The senders have been installed without subsequently being calibrated. By incorrectly aligning with the left lane, ACC now controls the distance to the passenger car driving in this lane and not the truck in the same lane.This unwanted control behaviour is even more noticeable when cornerning, particularly in the left hand corners in this example.The sender must be calibrated if: • the rear axle tracking has been adjusted. • the ACC unit (sender and control unit) have been removed and installed. • the front bumper has been removed and installed. • the front bumper has been loosened or displaced. • the front bumper has been damaged by the application of excessive force to the bumper. • the horizontal misalignment angle is outside the range -0.8° to +0.8°.In vehicles equipped with two ACC units (ADR sender, right G259 and ACC control unit J428 as well as left adaptive cruise control sender G258 and ACC control unit 2 J850), both senders must always be set. The setting procedure should begin with sender G259, which acts as the master.ADR sender, right G259 and ACC control unit J428 (master)Left adaptive cruise control sender G258 and ACC control unit 2 J850 (slave)620_027a40 The ACC unit is attached to the baseplate by three studs. The baseplate is rigidly bolted to the bumper. The studs are tipped with ball heads. The ball heads are mounted in plastic ball joint sockets fitted into mounting eyelets in the baseplate. The screw threads are inserted in plastic elements on the sender (clips). Two of the three screws (A,B) are for setting the sender; the third screw (C) is non-adjustably attached to the sender housing.Turning the screws (A or B) adjusts the distance between the sender and the baseplate. The sender is pivoted about the axis formed by the non-adjustable screw (C) and by the second, adjustable screw (B or A). This allows the senders to be adjusted independently in the horizontal direction (red axis) and in the vertical direction (blue axis). This adjustment (turning of the screws) can be made using the setting tool VAS 6190/2.620_0681231 = plastic ball joint sockets 2 = mounting bracket 3 = cover 4 = stud 5 = clip 6 = ACC sender and ACC control unit456620_067A prerequisite for successful calibration of the ACC sender is that the stud length is correctly set.620_06541 A sender can be calibrated using the following special tools: • VAS 6190A (not suitable for A6, S6, RS6, A7, S7, RS7, A8 and S8, no longer included in workshop equipment range) • ACC setting device VAS 6430 or setting device, basic set VAS 6430/1 together with ACC reflector mirror VAS 6430/3620_069The basic principle of the calibration procedure is the same irrespective of ACC system and vehicle model: A mirror is positioned in front of the vehicle at right angles to the vehicle's geometric driving axis (the geometric driving axis indicates the running direction of the rear axle and, thus, the vehicle's direction of motion when driving in a straight line). Exact positioning of the mirror necessitates the use of an axle alignment stand and initial alignment of the vehicle. To determine whether the position of the radar sensor is within the nominal range, a full vehicle alignment procedure must be performed. A "quick-entry" wheel alignment procedure is sufficient (performance of rim runout compensation together with alignment of the rear axle track width).The radar sensors are then instructed by the ACC control unit to transmit radar waves and receive the waves reflected by the mirror. The mechanic initiates this procedure using the diagnostic tester. The sender is set correctly if the reflected radar waves impinge on the ACC control unit in exactly the same position from which they originated. The control unit evaluates the extent of the deviation from the point of origin and thereby determines the misalignment angle. The diagnostic tester tells the mechanic what adjustment to make at the relevant setting screw.!Information A key requirement for an exact adjustment is the careful alignment of the mirror perpendicular to the geometric driving axis. If this setting is not made correctly, the remainder of the setting procedure will go smoothly but the sender will still exhibit too large a misalignment angle after the calibration has been completed.620_07042 ACC transmits and receives signals after it is initialised following engine start-up. The ACC system permanently transmits and receives signals during the subsequent driving cycle (after terminal 15 "on") even if the driver has not activated the system. Even during subsequent stop cycles in vehicles equipped with the Start Stop System, ACC continues to transmit and receive signals. The system detects a misalignment of the sender by evaluating the following key information: • objects detected by ACC (crash barriers, other vehicles) • yaw rate (vehicle movement about the vehicle's vertical axis)Forces acting directly on the peripheral regions of the ACC unit may be sufficient to force the ball head tips of the studs out of the ball joint sockets in the mounting bracket. This can, for example, occur in the winter if the bumper is driven into a snow bank when parking the vehicle. In these cases, the misalignment angle will be sufficiently large to initiate system deactivation. In most cases, subsequent calibration efforts will prove unsuccessful. This is why it is important to always check that the sender is properly attached before it is calibrated.l The misalignment angle of ACC control unit 1 (J428) is currently 0.048° l The misalignment angle of ACC control unit 2 (J850) is currently 0.26°The measured value for horizontal misalignment angle, which can be read out using the diagnostic tester, is important information that allows service centres to assess the system's behaviour. Even deviations in the order of approximately 0.8° are very noticeable in the control behaviour of the system and should be corrected by calibrating the sender at a qualified service centre. If the deviation exceeds approximately 1.4°, the system will be shut down and an entry will be made in the vehicle's event memory.Calibration is not necessary until a misalignment angle of 0.8° is exceeded. Should ACC control units (J428 and J850) still be re-calibrated?HelpCancel test620_07143 All rights reserved. Technical spec