TECHNICAL DOCUMENTATION

SSP 629 Audi TT (Type FV) Vehicle electrics

PDFEN76 pages10 MB
SSP 629 Audi TT (Type FV) Vehicle electrics - PDF cover

This PDF is currently unavailable.

Read document text
Self Study Programme 629 For internal use onlyAudi TT (Type FV) Vehicle electrics, electronics and infotainmentAudi Service Training BackForwards Ξ ContentsThe new Audi TTAll versions of the new Audi TT come with a generous range of standard equipment, particularly the MMI radio and the electromechanical parking brake. Alongside the S sports seat with numerous leather and trim variants, options include the advanced key, hill hold assist, high-beam assist, the LED interior lighting package, front seat heating, and the storage and luggage compartment package. On the infotainment front, customers can choose from a wide range of options. The connectivity package features the MMI touch system incorporating a touch-sensitive touch pad. At the top of the modular range is the MMI Navigation plus with its large flash memory, two card readers, DVD drive, Bluetooth interface and voice control system. The T30 chip from the Tegra 3 series by market leader Nvidia, which is installed in the new-generation Modular Infotainment System, controls all in-car navigation and multimedia functions and displays content in the Audi virtual cockpit. The Audi connect system complements the MMI Navigation plus perfectly – it connects the new Audi TT to the internet using the high-speed LTE transmission standard. The integrated Wi-Fi hotspot means passengers can surf the internet and e-mail as they please, while the driver can rely on the customised Audi connect services. The infotainment package is rounded out by attractive optional equipment. The Audi Phone Box conveniently links mobile phones to the car. Its centrepiece is a universal planar aerial which is integrated into the storage tray in the centre armrest. Thanks to close-range coupling, the phone communicates with the flat planar aerial, which uses an amplifier to transmit the signals to the car aerial. The Bang & Olufsen Sound System features a 14-channel amplifier and 12 loudspeakers; the bass loudspeakers in the doors are illuminated discretely by fibre optics. Highly intelligent assistance systems make driving the new TT an even more pleasurable experience. As an option, the car can be equipped with Audi side assist, which uses rear-mounted radar sensors to help drivers change lane more safely; camera-based traffic sign recognition; Audi active lane assist, which helps the driver if necessary by steadily correcting steering or warning him/ her if there is a danger of unintentionally drifting out of lane; and the park assist system with ambient display which independently guides the car into suitable parking spaces.2 ContentsPower supplyBattery ________________________________________________________________________________________________________________________________________________________ Main battery lead ____________________________________________________________________________________________________________________________________________ AGM battery __________________________________________________________________________________________________________________________________________________ Fuses, fuse holder and jump start terminal ______________________________________________________________________________________________________________ 4 4 5 6NetworkingTopology ______________________________________________________________________________________________________________________________________________________ 8 Overview of bus systems ___________________________________________________________________________________________________________________________________ 10 New features of the bus systems __________________________________________________________________________________________________________________________ 10 Optical bus system MOST150 _ _____________________________________________________________________________________________________________________________ 11 Optical replacement control unit VAS 6778 ______________________________________________________________________________________________________________ 11Control unitsBrief descriptions ___________________________________________________________________________________________________________________________________________ 12Exterior lightsHeadlights ___________________________________________________________________________________________________________________________________________________ 28 "Sequential flashing" _______________________________________________________________________________________________________________________________________ 32 Headlight range adjustment _______________________________________________________________________________________________________________________________ 33 Tail lights ____________________________________________________________________________________________________________________________________________________ 34 High-level brake light / number plate light ______________________________________________________________________________________________________________ 35Vehicle electronicsCar key _ _______________________________________________________________________________________________________________________________________________________ 36 Keyless starting system ____________________________________________________________________________________________________________________________________ 36 Terminal control unit _______________________________________________________________________________________________________________________________________ 37 Advanced Key ________________________________________________________________________________________________________________________________________________ 39 Implementation of keyless entry and start systems at Audi ___________________________________________________________________________________________ 39 System processes in the keyless start system _ ___________________________________________________________________________________________________________ 40 System processes in the keyless entry system (advanced key) _________________________________________________________________________________________ 46 Immobiliser _ ________________________________________________________________________________________________________________________________________________ 49 Electronic steering column lock control unit J764 _ ______________________________________________________________________________________________________ 50 Electrical rear spoiler _______________________________________________________________________________________________________________________________________ 51 Safelock function _ ___________________________________________________________________________________________________________________________________________ 52 Overhead module of Audi TT _______________________________________________________________________________________________________________________________ 53 Interior light _________________________________________________________________________________________________________________________________________________ 54InfotainmentOverview of versions ________________________________________________________________________________________________________________________________________ 56 Second-generation MIB High ______________________________________________________________________________________________________________________________ 58 MMI radio ____________________________________________________________________________________________________________________________________________________ 59 MMI radio with connectivity package ____________________________________________________________________________________________________________________ 60 MMI Navigation plus _ _______________________________________________________________________________________________________________________________________ 61 Audi connect (depending on market) _____________________________________________________________________________________________________________________ 62 Networking __________________________________________________________________________________________________________________________________________________ 63 Display and operating concept _ ____________________________________________________________________________________________________________________________ 64 Control panel ________________________________________________________________________________________________________________________________________________ 65 Sound systems ______________________________________________________________________________________________________________________________________________ 67 Aerials overview _____________________________________________________________________________________________________________________________________________ 70 Audi phone box ______________________________________________________________________________________________________________________________________________ 73Test your knowledgeThe Self Study Programme teaches a basic understanding of the design and mode of operation of new models, new automotive components or new technologies. It is not a Repair Manual! Figures are given for explanatory purposes only and refer to the data valid at the time of preparation of the SSP. This content is not updated. For further information on maintenance and repair work, always refer to the current technical literature.!NoteReference3 BackForwards Ξ ContentsPower supplyBatteryThe battery of the Audi TT is housed in the rear end. Battery size and type are dependent on engine version, trim and country specification. Standard batteries as well as AGM batteries are used. Attached to the battery positive terminal is the main fuse box and the battery isolator. On the negative terminal is the battery monitoring control unit J367. This control unit, also known as the battery data module (BDM), combines with the earth lead to form a unit. If a battery is replaced, it must be adapted (encoded) to the battery monitor control unit J367.Main battery leadAs was previously the case with the Audi A8 ’10, an advanced battery main lead is used on the underbody of the Audi TT. It is a flexurally rigid aluminium ribbon cable coated with a red plastic insulating layer. Apart from its light weight, this type of main battery lead has other advantages as well: • Because of the shape and rigidity of the rail, there is no need for fixings • No cable ducts are required • More efficient use is made of available space4 BackForwards Ξ ContentsAGM batteryIn the case of the AGM (Absorbent Glass Mat) batteries, the battery electrolyte is absorbed in a glass microfibre mat. In addition to having higher deep-cycle resistance, the AGM battery is noted for its leak-proof design. When charging an AGM battery, it is important to follow the charger's operating instructions and, where applicable, to program the charger for AGM batteries. The following batteries are used on the Audi TT: • 80 Ah/380 A • 95 Ah/450 A • 68 Ah/380 A (AGM) • 75 Ah/420 A (AGM) • 92 Ah/520 A (AGM)629_002Cable routingThe main battery lead starts at the battery positive terminal as a flexible, round-section lead. It is led out of the vehicle interior through a cable sleeve, becoming a ribbon cable in the rear axle area and terminating in the engine bay on the left-hand side at the jump start terminal. From here, wires then go to the e-box, as well as to the starter and alternator.5 BackForwards Ξ ContentsFuses, fuse holder and jump start terminalFusesIn addition to the standard flat fuses, the space-saving mini fuses and the circuit breakers (thermal fuses), the Audi TT uses the new J-Case fuse first fitted in the Audi A3 '13. The fuses are, like the standard and mini fuses, assigned to the corresponding fuse ratings by plastic casings in different colours.J-Casefuses629_003Fuse rail on the e-box Fuses are marked “SA” in current flow diagramJump start connectionThe multi-fuse mounted on the front of the e-box is again used in the Audi TT. Several fuses with different ratings are grouped together to form a fuse strip or multi fuse. On this rail are fuses for protecting, e.g., the alternator, the electromechanical steering and the radiator fan. In the event of a fault, only the complete fuse rail can be replaced.e-box with fuses and relays Fuses are marked “SB” in current flow diagram6 BackForwards Ξ ContentsFuse holder at battery positive terminal (also incorporates battery isolator), fuses are marked "S" in current flow diagram629_004Fuse holder and relay panel under the dash panel Fuses are marked "SR" in current flow diagram Fuse holder and relay panel under the dash panel, left Fuses are marked “SC” in current flow diagram7 BackForwards Ξ ContentsNetworkingTopologyLight switch E1 Alarm horn H12 Anti-theft alarm sensor G578Wiper motor control unit J400Garage door operating unit E284Rain and light detector sensor G397 Humidity sensor G355 Onboard power supply control unit J519 Control unit in dash panel insert J285Garage door opener control unit J530Steering column electronics control unit J527Multi-contour seat control unit, front driver side J873 Multi-contour seat control unit, front passenger side J872Driver side door control unit J386Passenger side door control unit J387Driver side volume control E67Multimedia system operating unit E380Electronic steering column lock control unit J764 Entry and start authorisation control unit J518Data bus diagnostic interface J533Selector lever sensors control unit J587ABS control unit J104Interface control unit for vehicle location system J843 Air conditioner operating and display unit 1 E774 Air conditioner operating and display unit 2 E775 Air conditioner operating and display unit 3 E776 Air conditioner operating and display unit 4 E777 Air conditioner operating and display unit 5 E778 Climatronic control unit J255Engine control unit J623ECD control unit (electronically controlled damping) J250 All-wheel drive control unit J492Double-clutch gearbox mechatronics J743Fresh air fan control unit J126Structure-borne sound control unit J869Power steering control unit J500Refrigerant circuit pressure sender G805Seat occupancy recognition control unit J706Airbag control unit J234Parking aid control unit J446Humidity sender in fresh air intake duct G657 Air quality sensor G2388 BackForwards Ξ ContentsThe topology shows all control units with connectivity to the bus systems.Some of the control units shown here are optional or countryspecific equipment or due to be rolled out at a later date.TV tuner R78Digital sound package control unit J525Headlight assist control unit J844orInformation electronics control unit 1 J794 Reversing camera system control unit J772Diagnostic portFront camera for driver assistance systems R242Audi side assist control unit J769Audi side assist control unit 2 J770Battery monitor control unit J367Headlight range adjustment unit J431orAlternator CAdaptive cornering light and headlight range adjustment control unit J745 Left LED headlight power module 1 A31 Right LED headlight power module 1 A27Multifunction steering wheel control unit J453Power module for left headlight J667Headlight power module, right J668orPark assist steering control unit J791629_005Key: Powertrain CAN bus Convenience CAN bus Extended CAN bus "OR" configuration Infotainment CAN bus Diagnostics CAN bus Suspension CAN bus Modular infotainment system (MIB) LIN bus Sub-bus systems MOST bus9 BackForwards Ξ ContentsOverview of bus systemsBus system Powertrain CAN bus Convenience CAN bus Extended CAN bus Infotainment CAN bus Suspension CAN bus Modular infotainment system CAN Diagnostics CAN bus MOST bus Cable colour Configuration Electrical two-wire bus system Electrical two-wire bus system Electrical two-wire bus system Electrical two-wire bus system Electrical two-wire bus system Electrical two-wire bus system Electrical two-wire bus system Optical bus system Max. data transfer rate 500 kbit/s 500 kbit/s 500 kbit/s 500 kbit/s 500 kbit/s 500 kbit/s 500 kbit/s 150 Mbit/s Property Not single wire capable Not single wire capable Not single wire capable Not single wire capable Not single wire capable Not single wire capable Not single wire capable Ring structure: an open circuit leads to total system failure Capable of single-core operation Not single wire capableLIN bus Sub-bus systemElectrical single-wire bus system Electrical two-wire bus system20 kbit/s 500 kbit/sNew features of the bus systems• The convenience CAN and the infotainment CAN in the Audi TT are high-speed bus systems • New CAN bus: Modular Infotainment System (MIB) CAN • New MOST bus: MOST150 • Dash panel insert control unit J285 is a convenience CAN bus user and a MOST150 user, and is connected to the information electronics control unit 1 - J794 via the Modular Infotainment System CAN • The data bus diagnostic interface J533 is the master of LIN slave "multifunction steering wheel control unit J453" • The information electronics control unit 1 - J794 is connected to the multimedia system operating unit E380 and to the dash panel insert control unit J285 via the Modular Infotainment System CAN • The data bus diagnostic interface is not integrated into the MOST bus • The information electronics control unit 1 J794 is the system and diagnostic manager for the MOST busThe networking diagram on pages 8/9 provides a schematic overview of the communication paths of the in-car control units.Which control units are fitted in the vehicle depends on the specification. Here are a few examples:• The headlight assist control unit J844 is never fitted together with the front camera for driver assistance systems R242• The seat occupancy recognition control unit J706 is only available for the North American Region10 BackForwards Ξ ContentsOptical bus system MOST150HistoryAn optical data bus system known as the MOST bus (MOST25 to be precise) was fitted in an Audi vehicle for the first time in the Audi A8 ’03. This data bus system is named after the "Media Oriented Systems Transport (MOST) Cooperation". This organisation is made up of various automobile manufacturers, their components suppliers and software companies which joined forces to create a standardised high-speed data transfer system. The term "Media Oriented Systems Transport" denotes a network with media-oriented data transport. This means that, unlike in the CAN bus, address-oriented messages are sent to a specific recipient. This technology is used in Audi vehicles to transfer data within the infotainment system. The data transfer rate on the MOST25 bus is approx. 25 Mbit/s.MOST150After the Audi A3 ’13, the MOST150 is now also featured in the Audi TT . This advancement in MOST technology is six times faster than the MOST25 bus. The development process necessitated making various modifications to the components of the MOST bus. For instance, the transmitter and receiver units – Fiber Optical Transmitters (FOT) – had to be adapted. Other components such as the optical connectors, the fibre optics and the electrical connectors of the control units are identical to those of the MOST25.System managerUp to three control units are integrated into the MOST bus in the Audi TT: • Control unit 1 for information electronics - J794 • Control unit in dash panel insert J285 • TV tuner R78 • Digital sound package control unit J525 The information electronics control unit 1 J794 in the Audi TT serves not only as the system manager for the MOST bus, but also as the diagnostic manager - a function previously performed by the data bus diagnostic interface J533.TV tuner R78Control unit in dash panel insert J285Digital sound package control unit J525Information electronics control unit 1 J794 629_006Optical replacement control unit VAS 6778DiagnosticsThe ring break diagnosis procedure is identical to that of the previous MOST bus system. However, the inspection plan for the Audi TT has to be retrieved from the vehicle diagnostic tester using address word 5F. Even though the ring break diagnosis procedure remains unchanged, a modified tool – the optical replacement control unit VAS 6778 – must be used in the event of an optical fault in the MOST150 bus because the transmitter and receiver units in the control units have been modified.629_00711 BackForwards Ξ ContentsControl unitsBrief descriptionsOnboard power supply control unitDesignation Equipment Installation location Tasks Onboard power supply control unit J519 Always fitted Under the dash panel, left-hand side Central locking master Exterior light master Interior light master Anti-theft alarm / optional equipment master, PR No.: 7AL Activation of various relays Activation of various convenience components: • Seat heaters • Heated spray nozzles • Windscreen washer pump • Headlight washer system pump • Reading in various switches and buttons • Reading in various sensors 09 • Convenience CAN bus user • J519 is the LIN master for: • LIN 1 – rain and light detection sensor G397, humidity sender G355, wiper motor control unit J400 and light switch E1 • LIN 2 – alarm horn H12 • LIN 3 – anti-theft alarm system sensor G578 and control panel for garage door opener E284 • LIN 4 – garage door opening control unit J530; multi-contour seat control unit, front driver side J872; and multi-contour seat control unit, front passenger side J873 Duplicated pins on LIN 1 and on LIN 4 Description on the next page • • • • • • Diagnostic address Data bus communicationSpecial featureJ519629_008Reference For a detailed description of the onboard power supply control unit J519, refer to Self Study Programme 611 "Audi A3 ’13 – Electronics and Driver Assistance Systems".12 BackForwards Ξ ContentsDuplicated pins on the onboard power supply control unitLIN 1 is distributed to two pins at J519 (duplicated pin). The wiper motor control unit J400 is connected to pin B30. Connected to pin C28 are the light switch E1 and the combination sensor comprising the rain/light sensor G397 and the air humidity sensor G355. This means that the control units connected to pin C28 are also affected in the event of a short circuit to positive or negative at pin B30. LIN 4 is also distributed to two pins on the onboard power supply control unit J519. The garage door opening control unit J530 is connected to pin B29. The multi-contour seat control unit, front driver side J872 and the multi-contour seat control unit, front passenger side J873 are both connected to pin A42. This means that the control units connected to pin A42 are also affected by a short circuit to positive or negative at pin B29, and vice versa.Rain and light detector sensor G397Humidity sender G355Light switch E1Alarm horn H12Wiper motor control unit J400C28B30B31LIN branch 1 Onboard power supply control unit J519 LIN branch 3LIN branch 2LIN branch 4A15A42B29Garage door operating unit E284Multi-contour seat control unit, front driver side J872Anti-theft alarm sensor G578Multi-contour seat control unit, front passenger side J873Garage door opener control unit J530629_00913 BackForwards Ξ ContentsGatewayDesignation Equipment Installation location Tasks Data bus diagnostic interface J533 Always fitted Under the dash panel, left-hand side • • • • 19 • User of all CAN bus systems • LIN master of battery monitor control unit J367 and alternator • LIN master of multifunction steering wheel control unit J453 Not a MOST bus user Network system gateway Diagnostic master Energy management system control Multifunction steering wheel masterDiagnostic address Data bus communicationSpecial featureJ533629_010Audi virtual cockpitDesignation Equipment Installation location Tasks Diagnostic address Data bus communication Special feature Control unit in dash panel insert J285 Always fitted In the dash panel • Display of information relevant to the driver • Immobiliser master 17 Convenience CAN bus user and MOST150 user and connected to the information electronics control unit 1 - J794 via the Modular Infotainment System CAN Also displays all content shown on the MMI screen in other vehiclesJ285629_011Reference For a detailed description of the Audi virtual cockpit, please refer to Self Study Programme 628 "Audi virtual cockpit".14 BackForwards Ξ ContentsSteering column electronicsDesignation Equipment Installation location Task Diagnostic address Data bus communication Special feature Steering column electronics control unit J527 Always fitted On the steering column • Connecting the steering column stock and the electrical components in the steering wheel to the vehicle electronics 16 Convenience CAN bus user Transfers the LIN signals from the data bus diagnostic interface J533 (master) to the multifunction steering wheel control unit J453 (slave)Data bus diagnostic interface J533Steering column electronics control unit J527 J527 Coil spring F350Multifunction steering wheel control unit J453629_012 629_013Sound actuatorDesignation Equipment Installation location Task Diagnostic address Data bus communication Structure-borne sound control unit J869 Depending on engine version In the plenum chamber, right-hand side, beneath the windscreen Producing a sporty engine sound for the vehicle occupants A9 Powertrain CAN bus userJ869629_01415 BackForwards Ξ ContentsAir conditioning systemDesignation Equipment Installation location Tasks Climatronic control unit J255 Standard equipment: manual air conditioning system Optional equipment: automatic air conditioning, PR No.: 9AK On the dash panel cross-member Controlling: • Temperature • Blower • Air flow distribution 08 • Convenience CAN bus user • J255 is the LIN master for: • LIN 1 – fresh air blower control unit J12, refrigerant circuit pressure sender G805, fresh air intake duct air humidity sensor G657 and air quality sensor G238 • LIN 2 – air conditioner operating and display unit 1 E774 to air conditioner operating and display unit 5 E778 The control unit is separate from the operating and display componentsDiagnostic address Data bus communicationSpecial featureJ255629_01516 BackForwards Ξ ContentsDoor electronics, driver sideDesignation Equipment Installation location Task Diagnostic address Data bus communication Special features Door control unit, driver side J386 Always fitted In the driver's door Controlling the electrical and electronic components in and on the driver's door 42 Convenience CAN bus user • J386 acts as the substitute master for the central locking system in the event of failure of the onboard power supply control unit J519 • Activates the side turn signal in the driver's door mirrorJ386629_016Front passenger side door electronicsDesignation Equipment Installation location Task Diagnostic address Data bus communication Special feature Door control unit, front passenger side J387 Always fitted In the front passenger's door Controlling the electrical and electronic components in and on the front passenger's door 52 Convenience CAN bus user Activates the side turn signal in the front passenger door mirrorJ387629_01717 BackForwards Ξ ContentsAdvanced key / keyless entry and start authorisationDesignation Equipment Installation location Tasks Diagnostic address Data bus communication Special feature Access and start authorisation control unit J518 Standard equipment: keyless start Optional equipment: keyless entry, PR No.: 4F2 Under the dash panel • Reading in both capacitive sensors • Activation of the entry and start authorisation aerials B7 Convenience CAN bus user Exterior aerials are fitted to the vehicle underbody in the B post areaJ518629_018Vehicle trackingDesignation Equipment Installation location Tasks Diagnostic address Data bus communication Special feature Interface control unit for vehicle location system J843 Optional equipment, PR No.: 7G9 Behind the side trim in the luggage compartment, left-hand side • Prerequisite for installation of Audi Tracking Assistant Plus • Data exchange between the tracking assistant and other vehicle control units 3D Convenience CAN bus user The tracking assistant is always fitted as a retrofit solution (even in new vehicles). The vehicle tracking system interface control unit J843 cannot be retrofitted.J843629_019 18 BackForwards Ξ ContentsElectrical steering column lockDesignation Equipment Installation location Task Diagnostic address Data bus communication Special features Electronic steering column lock control unit J764 Always fitted On the steering column • Locking and unlocking the steering column 2B Convenience CAN bus user • Can be replaced separately from the steering column • Immobiliser userJ764629_020Reversing cameraDesignation Equipment Rear view camera control unit J772 Optional equipment Versions: • Parking aid plus with reversing camera, PR No.: 7X2+KA2 • Parking aid with reversing camera, PR No.: 7X5+KA2 In the handle on the boot lid • Rectification and processing of raw images captured by the reversing camera • Transfer of processed images to the information electronics control unit 1 J749 6C Infotainment CAN bus user No need for a separate control unit, control unit and camera are integrated into a single housingInstallation location Tasks Diagnostic address Data bus communication Special featureJ772629_021 19 BackForwards Ξ ContentsInfotainmentDesignation Equipment Control unit 1 for information electronics - J794 MMI radio as standard equipment, PR No.: I8E+7UH Optional equipment Versions: • MMI touch, PR No.: UJ1 • MMI Navigation plus, PR No.: I8H+7UG In the glove compartment Controlling the infotainment systems 5F • Infotainment CAN bus user • MOST bus user • J794 is connected to the multimedia system operating unit E380 and to the dash panel insert control unit J285 via the Modular Infotainment System CAN. • No need for a separate MMI display, all content is displayed in the Audi virtual cockpit • J794 is the system manager and the ring break diagnostics master for the MOST busInstallation location Task Diagnostic address Data bus communicationSpecial featuresJ794629_022Sound amplifierDesignation Equipment Installation location Task Diagnostic address Data bus communication Digital sound package control unit J525 Optional equipment for models with Bang & Olufsen Sound System, PR No.: 9VS Under the seat, front left Driving the 12 loudspeakers 47 MOST bus userJ525629_02320 BackForwards Ξ ContentsTV tunerDesignation Equipment Installation location Task Diagnostic address Data bus communication TV tuner R78 Optional equipment: Digital TV reception PR No.: QV1 In the luggage compartment, rear right TV reception 57 MOST bus userR78629_024Electronic Stabilisation Program (ESP)Designation Equipment Installation location Tasks ABS control unit J104 Always fitted • In the engine bay, on right-hand side of engine bulkhead in left-hand-drive models • In the engine bay, on left-hand side of engine bulkhead in right-hand-drive models • • • • • • • 03 Suspension CAN user • The control unit can be replaced separately from the valve block using ESD protective mat VAS 6613 • The electro-mechanical parking brake is integrated into the ABS control unit. Address word 53 for electro-mechanical parking brake has been deleted. Anti lock braking system (ABS) Electronic Stabilisation Program (ESP) Traction Control System (TCS) Electronic Differential Lock (EDL) Electronic transverse lock Multicollision brake Electro-mechanical parking brake (EPB)Diagnostic address Data bus communication Special featuresJ104 Valve block629_025 21 BackForwards Ξ ContentsPower steeringDesignation Equipment Installation location Tasks Power steering control unit J500 Always fitted Connected to the steering gear • • • • 44 Suspension CAN user • The control unit with power steering motor as well as the steering angle sender G85 can only be replaced together with the steering gear • G85 has no separate data bus connections; data is transferred through the power steering control unit J500 Power steering Servotronic speed-responsive power steering Corrective steering intervention, with Audi active lane assist and park assist Corrective steering intervention, with ESPDiagnostic address Data bus communication Special featuresJ500629_026All-wheel driveDesignation Equipment Installation location Task Diagnostic address Data bus communication Special features All-wheel drive control unit J492 Standard equipment with quattro powertrain Connected to the rear axle gear Controlling the Haldex coupling depending on the driving situation 22 Suspension CAN user • The control unit can be replaced separately and without removing the rear axle gear • The Haldex coupling setup can be selected via Audi drive selectJ492629_02722 BackForwards Ξ ContentsParking aid/ park assistDesignation Equipment Parking aid control unit J446 Park assist steering control unit J791 Optional equipment Versions: • Rear parking aid, PR No.: 7X1 • Parking aid plus, PR No.: 7X2 • Audi parking system, PR No.: 7X5 Behind the dash panel, left-hand side • Reading in the ultrasound sensors and, depending on version, audible or visual obstacle warnings • Surveying the parking spot and computing the parking manoeuvre (if Audi parking system is installed) 76 Suspension CAN user The diagnostic address is now 76, having been 10 on previous Audi modelsInstallation location TasksDiagnostic address Data bus communication Special featureJ446 / J791629_028Audi magnetic rideDesignation Equipment Installation location Task Diagnostic address Data bus communication ECD (electronically controlled damping) control unit J250 Optional equipment, PR No.: 1BL Under the right-hand front seat Adaptation of the damping characteristic 14 Suspension CAN userJ250629_02923 BackForwards Ξ ContentsEngine control unitDesignation Equipment Installation location Task Diagnostic address Data bus communication Special features Engine control unit J623 Always fitted In the engine bay, adjacent to the e-box Controlling the engine characteristic 01 Powertrain CAN bus user • Control units (petrol engine/diesel engine) have different plug connections • Immobiliser user • Vehicles with an anti-theft alarm have an anti-theft device (sheet metal cover with shear bolts) over the engine control unitJ623629_030AirbagDesignation Equipment Installation location Tasks Diagnostic address Data bus communication Airbag control unit J234 Always fitted On the centre tunnel in front of the centre console • Deployment of the airbags • Deployment of the pedestrian protection system 15 • Powertrain CAN bus user • LIN master for the seat occupancy recognition control unit J706 in vehicles for the North American Region Also controls the pedestrian protection systemSpecial featureJ234629_031 24 BackForwards Ξ ContentsDouble-clutch gearboxDesignation Equipment Installation location Task Diagnostic address Data bus communication Mechatronic unit for double-clutch gearbox J743 Optional equipment for vehicles with double-clutch gearbox: On the gearbox Controlling the double-clutch gearbox 02 Powertrain CAN bus userJ743629_032Selector lever sensorsDesignation Equipment Installation location Tasks Diagnostic address Data bus communication Special feature Selector lever sensors control unit J587 Optional equipment for vehicles with double-clutch gearbox: On the selector lever • Indication of the selector lever position • Indication of tiptronic commands 81 Powertrain CAN bus user The control unit can only be replaced together with the selector leverJ587629_033 25 BackForwards Ξ ContentsHeadlight range adjustmentDesignation Equipment Installation location Tasks Headlight range adjustment unit J431 Adaptive cornering light and headlight range adjustment control unit J745 Always fitted, different versions depending on type of headlights fitted Behind the dash panel, left-hand side • Dynamic headlight range adjustment • Controlling the light profiles • Controlling the MatrixBeam function 55 CAN-Extended bus user Connected to the power modules for the left and right headlights via a sub-bus systemDiagnostic address Data bus communication Special featureJ431 / J745629_034Audi side assist (lane change warning system)Designation Equipment Installation location Tasks Diagnostic address Data bus communication Special feature Lane change assist control unit J769 Audi lane assist control unit 2 J770 Optional equipment, PR No.: 7Y1 • In the bumper, rear right J769 • In the bumper, rear left J770 • Monitoring the area behind and to the side of the vehicle • Activation of the warning lights in the door mirrors 3C • J769 (master) CAN-Extended bus user • J770 (slave) connected to J769 via a sub-bus system The control units are mounted in the bumper cover. The system has to be calibrated after removal and installation.J769J770629_035 26 BackForwards Ξ ContentsLow beam assistDesignation Equipment Installation location Task Diagnostic address Data bus communication Special feature Headlight assist control unit J844 Optional equipment, PR No.: 8G1 In the rear-view mirror Automatic activation and deactivation of the high beam in response to oncoming traffic 20 CAN-Extended bus user In combination with xenon headlights and LED headlightsJ844629_036Audi active lane assist (lane departure warning system) Low beam assist Road sign recognition Audi Matrix LED headlightDesignation Equipment Front camera for driver assistance systems R242 Optional equipment Versions: • Audi active lane assist, PR No.: 6I1 • Camera-based traffic sign recognition, PR No.: QR9 • Audi Matrix LED headlight, PR No.: 8G4 On the windscreen above the rear-view mirror pedestal Imaging of traffic, traffic signs and lane markers A5 CAN-Extended bus user Camera-based traffic sign recognition requires MMI Navigation plus and Audi active lane assistInstallation location Task Diagnostic address Data bus communication Special featureR242629_037 27 BackForwards Ξ ContentsExterior lightsHeadlightsIn the case of the Audi TT, a distinction is made between two headlight versions: • Xenon headlight / ECE1) and SAE2) • LED headlight / ECE1) and SAE2) • Audi Matrix LED headlight / ECE1)Audi Matrix LED headlight629_038Xenon headlight629_039LED headlight629_040To remove headlights, the bumper cover first has to be taken off. The headlights are connected to the car body by means of adjusting elements. Thus, it is possible to align the headlights exactly with the other body parts. The parts marked "Service" in the detailed descriptions of the headlights on the following pages can be replaced individually in the event of damage.In the event of damage to the upper and inner headlight mounts, repair tabs can be attached to the headlight housing. For information as well as the corresponding spare part numbers, please refer to the workshop manual or the electronic parts catalogue.28 BackForwards Ξ ContentsXenon headlight, PR No.: 8IHThe figure shows the left headlight in the ECE1) versionHeadlight housingDaytime running light/side light control unit "Service" PSY24W turn signal bulb "Service" Turn signal reflector Plastic optical fibreD5S gas discharge lamp "Service" Projection module H8 bulb "Service" All-weather light reflectorLED module for daytime running lights and parking light "Service"629_041Design trimLight functions Daytime running light Side light Low beam Motorway light (raised via headlight range adjustment) High beam (change-over by shutter) All-weather light Turn signal light Sidemarker2) (not shown)Bulb used 4 LEDs with plastic optical fibres dimmed to approx. 25 % when side light function is active D5SPower 18 watts25 wattsBulb H8 PSY24W bulb 1 LED35 watts 24 watts 1 wattActivation mechanism In the case of bi-xenon headlights, the various light functions are activated by the onboard power supply control unit J519. The daytime running lights are dimmed for the duration of the turn signalling cycle (in the SAE2) version they are switched off). The left and right dipped beam shutter motors (V294 and V295 respectively) are used for changing over between low beam and high beam. The side light LEDs are used for the Coming Home / Leaving Home function.Adaptation for driving on the opposite side of the road It is not necessary to adapt the headlights. No further action is needed in order to meet the statutory requirements.Optional equipment The Xenon headlights can be combined with low beam assist (PR No.: 8G1) as well as a headlight washer system (PR No.: 8X1).Service The bulbs and the gas discharge lamp can be replaced with the headlights fitted. The ballast is integrated into the housing of the D5S gas discharge lamp. The headlight range adjustment motor (not shown) cannot be replaced individually.1) 2)ECE = for European market SAE = for North American Region29 BackForwards Ξ ContentsLED headlight, PR No.: 8ITThe figure shows the left headlight in the ECE1) versionLED headlight power module 1 "Service" (low beam and high beam)Headlight housingDaytime running light/side light control unit "Service"Headlight power module "Service" (headlight range adjustment) All-weather light modulePlastic optical fibre with modular daytime running light/side lightLow beam moduleTurn signal module Design trimHigh beam module629_042Light functions Daytime running light Side light Low beam Motorway light (raised via headlight range adjustment) High beam All-weather light Turn signal light Sidemarker2) (not shown)Bulb used 10 LEDs with plastic optical fibres dimmed to approx. 10 % when the side light function is active 11 LEDs 8 LEDs 3 LEDs 10 LEDs 2 LEDsPower 17 watts30 watts 28 watts 10 watts 16 watts 1 wattActivation mechanism The daytime running light/side light control unit is activated directly by the onboard power supply control unit J519. The control units for the headlight power module and LED headlight power module 1 are connected to the adaptive cornering light and headlight range adjustment control unit J745 via a CAN bus. Control unit J745, in turn, receives its commands from the onboard power supply control unit J519. The daytime running light is switched off for the duration of the turn signalling cycle. The side light LEDs are used for the Coming Home / Leaving Home function.Adaptation for driving on the opposite side of the road It is not necessary to adapt the headlights. No further action is needed in order to meet the statutory requirements.Equipment The headlight washer system is integrated as standard into the LED headlight. This headlight version can, as an option, be combined with low beam assist (PR No.: 8G1).Service With this headlight version, only the three outer control units can be replaced. The headlight range adjustment servomotor (not shown) cannot be replaced individually.1) 2)ECE = for European market SAE = for North American Region30 BackForwards Ξ ContentsAudi Matrix LED headlight, PR No.: 8G4The figure shows the left headlightHeadlight power Matrix headlight "Service" (low beam and high beam)Headlight housingDaytime running light/side light control unit "Service"Headlight power module "Service" (headlight range adjustment) All-weather light modulePlastic optical fibre with modular daytime running light/side lightLow beam moduleTurn signal module Design trimHigh beam module or MatrixBeam high beam with fan629_043Light functions Daytime running light Side light Low beam Motorway light (raised via headlight range adjustment) High beam or MatrixBeam high beam with adaptive cornering light All-weather light (activated on both sides) Intersection light (activated on both sides) Turn signal lightBulb used 10 LEDs with plastic optical fibres dimmed to approx. 10 % when side light function is active 11 LEDs 12 LEDs 3 LEDs 10 LEDsPower 17 watts30 watts 29 watts 10 watts 16 wattsActivation mechanism The daytime running light/side light control unit is activated directly by the onboard power supply control unit J519. The control units for the headlight power module and Matrix headlight power module are connected to the adaptive cornering light and headlight range adjustment control unit J745 via a CAN bus. Control unit J745, in turn, receives its commands from the onboard power supply control unit J519. The daytime running light is switched off for the duration of the turn signalling cycle. The side light LEDs are used for the Coming Home / Leaving Home function.Adaptation for driving on the opposite side of the road It is not necessary to adapt the headlights. No further action is needed in order to meet the statutory requirements.Equipment The headlight washer system is integrated as standard into the Audi Matrix LED headlight.Service With this headlight version, only the three outer control units can be replaced. The headlight range adjustment servomotor (not shown) as well as the fan cannot be replaced individually.Reference For a detailed description of the MatrixBeam high beam, please refer to Self Study Programme 619 "Audi Matrix LED Headlight".31 BackForwards Ξ Contents"Sequential flashing"In the case of the Audi TT, the Audi Matrix LED headlight employs what is known as "sequential flashing". The term "sequential flashing" refers to the staggered activation of the turn signal LEDs from the inside outwards All turn signal LEDs then switch off at once.629_044Activation mechanism The onboard power supply control unit J519 sends the instruction to activate the turn signal to LED headlight power module 2. These power modules thereupon activate the LEDs in the turn signal module. Since "sequential flashing" is not desirable in all turn signalling modes, the onboard power supply control unit J519 indicates to the two LED headlight power modules 3 via a discrete line whether sequential or conventional flashing is required. For example, conventional flashing is used for indicating a crash, an emergency and a hazard after very heavy braking. Sequential flashing, on the other hand, is used for direction indicating, the manually activated hazard warning lights, central locking acknowledgement and confirmation of successful programming.Equipment Sequential flashing is only available for the front turn signals in the Audi TT in conjunction with the optional Audi Matrix LED headlights.32 BackForwards Ξ ContentsHeadlight range adjustmentThe Audi TT always comes equipped with a dynamic headlight range adjustment system. Depending on the altitude and movement of the vehicle, headlight range adjustment servomotors V48 and V49 correct the headlight range of the headlights. However, the designation of the headlight range adjustment control unit, the number of ride height sensors as well as the transmission rate for activation of the headlight range adjustment servomotors differ according to headlight version. The Audi TT can be fitted with electronic wheel damping as an option. These vehicles have four sensors for detecting the vehicle ride height. The signals from these senders are read into the electronically regulated damping control unit J250 via discrete lines. The electronically controlled damping control unit J250 is a powertrain CAN bus user and relays information on vehicle ride height via CAN bus to the headlight range adjustment control unit (depends on headlight version fitted).Schematic diagram of the headlight range adjustment system1) in conjunction with bi-xenon headlights 2) in conjunction with LED headlights 3) in conjunction with Audi Matrix LED headlights 4) in vehicles with Audi magnetic rideHeadlight range adjustment control unit J4311)Headlight range adjustment servomotors V48 / V491)Level control system sender, rear left G761)Data bus diagnostic interface J533Adaptive cornering light and headlight range adjustment control unit J7452)Headlight power module J667 / J6682)Level control system sender, rear left G762)Headlight range adjustment servomotors V48 / V492)Adaptive cornering light and headlight range adjustment control unit J7453)Headlight power module J667 / J6683)Level control system sender, rear left G763)Level control system sender, front left G783)Headlight range adjustment servomotors V48 / V493)ECD control unit (electronically controlled damping) J2504)Level control system sender, rear left G764)Level control system sender, rear right G774)Level control system sender, front left G784)Level control system sender, front right G2894)629_045Chassis CAN bus Extended CAN bus LIN busSub-bus systems Discrete line33 BackForwards Ξ ContentsTail lightsThe tail lights on the Audi TT are integrated into the body sides. Only LEDs are used as bulbs. In the case of the Audi TT, a distinction is made between the following tail light versions: • Low version / ECE1) and SAE2) • High version (with "sequential flashing") / ECE1) The various tail light versions are geometrically identical. In the low version, the only differentiation is the additional sidemarker for the SAE2) version. The high version with "sequential flashing function" has an additional electronic module in the tail light and is not available for the North American Region.Brake light/ fog lightTail lightReversing light629_046Sidemarker2)Turn signal lightBrake lightActivation mechanism The tail lights are activated by the onboard power supply control unit J519. The tail light LEDs are used for the Coming Home / Leaving Home function. The onboard power supply control unit J519 indicates to the tail lights via a discrete line whether sequential or conventional flashing is required.Equipment The low version of the tail light is installed on vehicles with xenon headlights and on NAR vehicles. The high version is used on vehicles with LED headlights and on vehicles with Audi Matrix LED headlights.Service Neither bulbs nor the electronics for "sequential flashing" can be replaced on the tail lights. In the event of damage, the entire tail light must be replaced.1) 2)ECE = for European market SAE = for North American Region34 BackForwards Ξ ContentsHigh-level brake light / number plate lightHigh-level brake lightThe high-level brake light is integrated into the boot lid below the rear spoiler and, comprising a total of 18 LEDs, provides additional brake lighting. The individual component parts of the high-level brake light cannot be replaced. If faulty, the complete component must be replaced. It is not necessary to remove the rear spoiler for this purpose. It is sufficient to open the rear spoiler.629_047Number plate lightsThe number plate lights on the Audi TT use LED technology, irrespective of tail light version. Both number plate lights are integrated into the boot lid handle, and each has two LEDs. Like the high-level brake light, they are activated by the onboard power supply control unit J519. The number plate lights can be replaced individually. In the event of damage, the handle must be replaced.HandleReversing camera629_048Number plate lights35 BackForwards Ξ ContentsVehicle electronicsCar keyThe new Audi TT will feature a new key design. To minimise the risk of mix-up, the opening and locking button has been repositioned. The shapes of the buttons have also been redesigned.Each new vehicle is supplied with three car keys. Two of these keys are fully functional remote control keys, while the third key is a so-called wallet key. The wallet key can be used to open and close the mechanical locks on the vehicle. It is also possible to turn on the ignition and start the engine with this key. As the wallet key does not have a battery, the emergency transponder coil must be used to turn on the ignition and start the engine. If the Audi TT is equipped with the optional advanced key (keyless entry system), the back of the remote control key is chromeplated. The second remote control key is supplied in the standard design.Audi TT car key in standard design629_049Keyless starting systemThe keyless starting system is standard on the Audi TT. The idea behind the keyless starting system is that the car key no longer has to be removed from the driver's pocket in order to start the engine. After pressing the Start button in the centre console, the vehicle electronics check whether an authorised car key is located inside the vehicle. If the test is successful, the ignition is turned on and the internal combustion engine is started. An electronic or mechanical ignition lock is no longer required and, therefore, is no longer fitted.To implement the keyless starting system, the following components are required in the vehicle: • J518 Entry and start authorisation control unit • E408 Entry and start authorisation button • R137 Luggage compartment aerial for entry and start authorisation • R139 Interior aerial 2 for entry and start authorisationR137R139 Convenience CAN busTerminal 30E4087.5 AEntry and start authorisation control unit J518629_050 36 BackForwards Ξ ContentsTerminal control unitThe entry and start authorisation button E408 is the central signal generator of the terminal control unit. Button E408 is read in by the entry and start authorisation control unit. For this reason, control unit J518 is also the master controller of the terminal control unit. As the master controller of the terminal control unit, control unit J518 determines the current status of the key contact and terminals 15 and 50. The terminal states are indicated to all control units in the vehicle via the various bus systems. Terminals 15 and 50 also exist as separate supply lines in the vehicle and are switched by relays. One relay connects the terminal 30 supply line to the terminal 15 supply line when the ignition is turned on and disconnects them again when the ignition is turned off. The relay is controlled by the onboard power supply control unit J519 and is referred to by service personnel as the terminal 15 voltage supply relay J329. The starter solenoid switch is activated by the terminal 50 line when the internal combustion engine is started. A relay connects the terminal 15 supply line to the terminal 50 supply line when the engine is started and disconnects them again after the engine actually starts up. The engine can, therefore, only be started when the ignition is on. For safety reasons, two series connected terminal 50 relays are always fitted. If one terminal 50 relay can no longer open its closed load contacts after the engine starts, then the second terminal 50 relay ensures that the starter motor circuit is broken. A faulty terminal 50 relay is detected by the engine control unit and entered into the fault memory. The two relays for switching terminal 50 are referred to by service personnel as starter relay 1 J906 and starter relay 2 J907. They are controlled by the engine control unit J623.Terminal 30 Onboard power supply control unit J519J329Terminal 15 Terminal 15 - 1 Terminal 15 - 2 Convenience CAN bus J533 Powertrain CAN bus J906Entry and start authorisation control unit J518Key contactEngine control unit Terminal 50 J623 J907Terminal 50629_051J329 J533 J906 J907 Terminal 15 voltage supply relay Data bus diagnostic interface Starter relay 1 Starter relay 237 BackForwards Ξ ContentsSwitching the terminal 15 relay J329Three signal lines lead to the onboard power supply control unit J519 from the master controller of the terminal control unit J518. • Key contact • Terminal 15 – 1 • Terminal 15 – 2 A signal voltage is applied to these signal lines by control unit J518 if the onboard power supply control unit is required to switch the terminal 15 relay. Control unit J518 also sends a terminal 15 request to the onboard power supply control unit via CAN bus. This request via CAN has no effect on switching of the terminal 15 relay. The signal lines are exclusively responsible for this. The onboard power supply control unit switches the terminal 15 relay if at least two of the three signal lines is carrying a signal voltage. This configuration ensures that the vehicle cannot be started in the event of an open circuit in one of the three signal lines.Convenience CAN busEntry and start authorisation control unit J518Key contact Terminal 15 - 1 Terminal 15 - 2Onboard power supply control unit J519Terminal 30J329J329 Terminal 15 voltage supply relayTerminal 15629_053Switching the terminal 50 relays J906 and J907A terminal 50 signal line leads directly to the engine control unit J623 from the master controller of the terminal control unit J518. Control unit J518 applies a signal voltage to this line if the engine is to be started. The engine control unit switches its two terminal 50 relays if this signal line is live and all other requirements for engine starting have been met. Control unit J518 also sends a terminal 50 request to the onboard power supply control unit via CAN bus. The engine control unit uses this information to validate the plausibility of the signal in the signal line from control unit J518.Terminal 15Convenience CAN busJ533Powertrain CAN bus J906Entry and start authorisation control unit J518Engine control unit Terminal 50 J623 J907J533 J906 J907 38Data bus diagnostic interface Starter relay 1 Starter relay 2Terminal 50629_054 BackForwards Ξ ContentsAdvanced KeyThe term "advanced key" is used to describe the keyless entry system, available at launch of the Audi TT (Type FV) for the first time in this model. This is an optional extra complementary to the standard keyless start system. The car key not longer has to be taken out of the driver's pocket in order to open both vehicle doors and the boot lid. When the driver moves his/her hand into the door handle or the boot lid handle, the advanced key uses radio signals to search for an authorised key. If the search is successful, the vehicle or boot lid is unlocked. Keyless entry is possible on both the driver and front passenger doors. The following additional components are integrated into the advanced key for the keyless entry system: • G415 Exterior door handle touch sensor, driver side • G416 Exterior door handle touch sensor, front passenger side • R134 Driver side aerial for entry and start authorisation • R135 Front passenger side aerial for entry and start authorisation • R136 Bumper aerial for entry and start authorisationTerminal 30 E408 R134 R135 R136 R137 R1397.5 AEntry and start authorisation control unit J518Wake-up signalConvenience CAN busG415G416 R47Onboard power supply control unit J519629_055Implementation of keyless entry and start systems at AudiThere are two different versions of the keyless entry system for Audi models. The systems differ from one another in regard to system supplier and the internal system processes, however not from the customer's point of view. The systems in vehicles from the B series onwards are suppied by Marquardt, while the systems in the Audi A3 and Audi TT are suppied by Hella. The keyless entry and start system was first introduced in the Audi A8 (D3) in 2002. The system was subsequently described in several self study programmes and Service TV programmes. All previous system descriptions refer to the Marquardt system because this was the only system in the Audi model range for a long time. This self study programme gives a detailed description of the Hella system offered in the Audi TT (Type FV). The following system processes are described: • Turning on the ignition with the start button • Turning on the ignition with the emergency transponder coil • Starting the engine with the start button • Unlocking the vehicle via the sensor in the driver's door handle • Unlocking the boot lid using the Softtouch function39 BackForwards Ξ ContentsSystem processes in the keyless start systemTurning on the ignition (not engine starting)Initial situation: • The vehicle is equipped with an automatic gearbox. • An authorised key is located inside the vehicle. • The brake is not depressed when the start button is pressed. • The CAN bus and the onboard power supply control unit are active.E408Terminal 30R137R1397.5 AEntry and start authorisation control unit J518Key contactTerminal 15 - 1Terminal 15 - 2Wake-up signalJ764Convenience CAN busJ285Onboard power supply control unit J519R47Terminal 30J329 D2Terminal 15D2 E408 J285 J329 J764 R47 R137 R139 Immobiliser reader coil Entry and start authorisation button Control unit in dash panel insert (instrument cluster) Terminal 15 voltage supply relay Electronic steering column lock control unit Central locking aerial Luggage compartment aerial for entry and start authorisation Interior aerial 2 for entry and start authorisation629_05640 BackThe system process step by step:Forwards Ξ Contents1. 2. 3. The entry and start authorisation button E408 is pressed. The pressing of this button is detected by control unit J518. Control unit J518 instructs control unit J764 to unlock the steering column via the convenience CAN bus. Control unit J518 instructs the instrument cluster J285 via the convenience CAN bus to enable the terminals. The instrument cluster J285, in turn, instructs control unit J518 to search for an authorised key. Control unit J518 then initiates a key search by activating interior aerials R137 and R139. An authorised vehicle key receives the signals sent by both interior aerials and responds by giving its key identification number. The onboard power supply control unit J519 receives the response from the key via the integrated central locking aerial R47. The onboard power supply control unit J519 indicates the reception of a key response to the instrument cluster J285 via the convenience CAN bus.14. After receiving a key response, the onboard power supply control unit J519 transmits the response to the instrument cluster J285. 15. Taking the key response as a basis, the instrument cluster J285 checks whether the response originates from an authorised car key. 16. If the check is successful, the instrument cluster J285 notifies control unit J764 via the convenience CAN bus. 17. If all the requirements for unlocking the steering column are met, control unit J764 unlocks the steering column. 18. The successful unlocking of the steering column is indicated to control unit J518 and to the instrument cluster J285 via the convenience CAN bus. 19. The instrument cluster J285 sends an enabling signal for the terminals to control unit J518. 20. Control unit J518 receives this information and checks whether all the requirements for switching on terminal 15 have been met. 21. If all the requirements have been met, the three signal lines (key contact, terminal 15-1 and terminal 15-2) are switched by control unit J518. 22. If the onboard power supply control unit J519 measures a high enough voltage level in at least two of the three signal lines, it switches the terminal 15 relay J329. The terminal 15 supply voltage will then be available to the connected electrical loads. 23. After switching the relay, the onboard power supply control unit J519 changes the status of terminal 15 from "off" to "on" and places this information on the CAN bus.4. 5. 6. 7. 8. 9. 10. The instrument cluster J285 sends key authentication data to control unit J518 via the convenience CAN bus. 11. Control unit J518 activates interior aerials R137 and R139 once again in order to transfer authentication data and measurement signals. 12. The key measures the field strengths of the measurement signals. Taking the measured field strengths as a basis, the key determines whether it is located inside the vehicle or not. In addition, the key calculates an appropriate key response based on the authentication data received. 13. The key sends a radio response if located inside the vehicle, and no response if not located inside the vehicle.41 BackForwards Ξ ContentsTurning on the ignition via the emergency transponder coil (not engine starting)Initial situation: • The vehicle is equipped with an automatic gearbox. • The batteries in the remote control key are so weak, it is not possible to communicate with the vehicle. • The CAN bus and the onboard power supply control unit are active. • The brake pedal is not depressed when the driver presses the start button.E408Terminal 30R137R1397.5 AEntry and start authorisation control unit J518Key contactTerminal 15 - 1Terminal 15 - 2Wake-up signalJ764Convenience CAN busJ285Onboard power supply control unit J519R47Terminal 30J329 D2Terminal 15D2 E408 J285 J329 J764 R47 R137 R139 Immobiliser reader coil Entry and start authorisation control unit Control unit in dash panel insert Terminal 15 voltage supply relay Electronic steering column lock control unit Central locking aerial Luggage compartment aerial for entry and start authorisation Interior aerial 2 for entry and start authorisation629_05642 BackThe system process step by step:Forwards Ξ Contents1. 2. 3. The entry and start authorisation button E408 is pressed. The pressing of this button is detected by control unit J518. Control unit J518 instructs control unit J764 to unlock the steering column via the convenience CAN bus