TECHNICAL DOCUMENTATION
SSP 631 Audi TT Roadster (type FV)

This PDF is currently unavailable.
Read document text
Self Study Programme 631 For internal use onlyAudi TT Roadster(type FV)Audi Service Training BackAudi presents a compact two-seater in the shape of the new TT Roadster and the TTS Roadster. The third-generation TT Roadster and TTS Roadster mark the continuation of a great tradition. Audi's designers have reinterpreted the styling of this classic vehicle and complemented it with innovative components. The new TT Roadster combines the dynamic ride of a sports car with the driving experience of an open‑top two‑seater. The basis for this consists of struts in the underbody and body that considerably improve both the torsional rigidity and the ride comfort. The flat and taut top of the new TT Roadster and the TTS Roadster also provides a clear contrast with the body and is defined by the short side window design that is typical of the TT Roadster. As with all Audi Cabriolet models, the new TT Roadster and the TTS Roadster also feature an electrically actuated fabric top.Forwards Ξ ContentsThe bodyshell of the TT Roadster and the TTS Roadster represents a new evolution of the Audi Space Frame (ASF) based on the modular transverse matrix (MQB). Compared with the Coupé, the body of the Roadster has been modified in key areas. Ultra high strength components made from hot-stamped steel reinforce the front end and the occupant cell floor. Aluminium is used in the cell as well as in all outer skin parts and attachments in the form of three typical semi-finished products – die-cast nodal elements, extruded profiles and sheet metal. The new TT Roadster is being launched with two turbocharged four-cylinder engines, a TDI and a TFSI. A powerful TFSI provides efficient drive in the TTS Roadster. As in the Coupé, the digital instrument cluster provides all information within the driver’s field of vision – a concept that is causing a sensation. This has already led to the Audi TT’s new display and control system receiving the Car Connectivity Award and the honour of Interior Innovation of the Year at the 2014 Automotive Interiors Expo Awards.631_002 2ContentsIntroductionPresentation __________________________________________________________________________________________________________________________________________________ 4 In brief ________________________________________________________________________________________________________________________________________________________ 6BodyIntroduction __________________________________________________________________________________________________________________________________________________ 8 Body reinforcements _ _______________________________________________________________________________________________________________________________________ 10Convertible topOverview _____________________________________________________________________________________________________________________________________________________ 12 Components _________________________________________________________________________________________________________________________________________________ 14Convertible top control unitInstallation locations _______________________________________________________________________________________________________________________________________ 16 Displays and operation of convertible top ________________________________________________________________________________________________________________ 18 Convertible top opening sequence ________________________________________________________________________________________________________________________ 24 Convertible top closing sequence _________________________________________________________________________________________________________________________ 26 Components of the convertible top control unit _________________________________________________________________________________________________________ 30 Windbreak ___________________________________________________________________________________________________________________________________________________ 39 Emergency operation of convertible top _ _________________________________________________________________________________________________________________ 42Passive safetyComponents _________________________________________________________________________________________________________________________________________________ 44 System overview ____________________________________________________________________________________________________________________________________________ 46Engines and power transmissionEngine/gearbox combinations _____________________________________________________________________________________________________________________________ 48ChassisOverview _____________________________________________________________________________________________________________________________________________________ 49Electrical systemIntroduction _________________________________________________________________________________________________________________________________________________ 50 Installation locations of control units ____________________________________________________________________________________________________________________ 51 Topology _____________________________________________________________________________________________________________________________________________________ 52 Control units _________________________________________________________________________________________________________________________________________________ 54Air conditioningIntroduction _________________________________________________________________________________________________________________________________________________ 56 Seat systems ________________________________________________________________________________________________________________________________________________ 57 Head space heater __________________________________________________________________________________________________________________________________________ 58 Forced ventilation of the cabin ____________________________________________________________________________________________________________________________ 59ServiceInspection and maintenance _ ______________________________________________________________________________________________________________________________ 60AppendixTest your knowledge ________________________________________________________________________________________________________________________________________ 62 Self study programmes _ ____________________________________________________________________________________________________________________________________ 63The self study programme teaches a basic understanding of the design and mode of operation of new models, new automotive components or new technologies. It is not a repair manual! Figures are given for explanatory purposes only and refer to the data valid at the time of preparation of the SSP. This content is not updated. For further information on maintenance and repair work, always refer to the current technical literature.NoteReference3 BackForwards Ξ ContentsIntroductionPresentationAs with the Coupé, the third generation of the compact sports car is again captivating, with its emotional design and dynamic qualities. The Audi TT Roadster also has a number of other technical highlights which are explained in detail in this self study programme. Here is a quick summary.EnginesFour cylinder engines with turbocharger and start-stop system: ► 2.0l TFSI (169 kW) ► 2.0l TFSI (228 kW) ► 2.0l TDI (135 kW)Assistance systemsThe following systems are optionally available: ► Audi side assist ► Camera-based traffic sign recognition ► Audi active lane assist ► Park assist system with ambient displayHeadlightsLED headlights or headlights incorporating Audi Matrix LED technology, consisting of 12 LEDs where the main beam is generated by controllable individual LEDs. The dynamic turn signals in the headlights and in the tail lights light up sequentially in the direction in which the driver is steering.Air conditioningChoice of manual or automatic air conditioning system. All control functions are integrated into the air vents. The automatic air conditioning system has small displays which show the selected setting. The Audi TT Roadster is optionally available with sport seats including a head space heater.4 BackForwards Ξ ContentsBodyAudi Space Frame (ASF) body made from aluminium and steel with high-strength and ultrahigh-strength steel alloys, die-cast aluminium nodal elements and side panels. Internal steel ribbing ensures the aluminum sills have high-strength properties. V‑shaped steel struts reinforce the zones underneath the engine compartment and the luggage compartment, and connect the axle carriers.Power transmissionFull-time quattro drive – systematically developed and refined for the TT – with electro-hydraulic multiplate clutch on the rear axle. It is possible to customise the all-wheel drive characteristics by networking the quattro drive with Audi drive select.Occupant safety systemsRigid rollover bars can protect the occupants in the event of a rollover. The front side airbags (head-thorax airbags) can protect the occupants in the event of a side impact.Convertible topElectrically actutated convertible top can be operated in manual mode or automatically. Graphical display of convertible top operation in Audi virtual cockpit. A power operated windbreak improves ride comfort when driving with the top down.631_043Displays and operationFully digital Audi virtual cockpit instrument cluster with dynamic animations and graphics. New MMI control panel on the centre tunnel console with 2 toggle buttons. On each side of the central rotary pushbutton, there are there are two buttons together with a main menu button and a back button. Touch-sensitive touch pad on the top of the rotary pushbutton.ChassisThird-generation Audi magnetic ride adaptive damper control as optional suspension version. Audi magnetic ride is adjustable in 3 stages via Audi drive select. Electro-mechanical progressive steering, where the steering ratio becomes more direct with increasing steering input.5 BackForwards Ξ ContentsIn briefDimensions1572 18324)13559451552 1966631_065 631_066986 3)8842505 4177788631_0676810 BackForwards Ξ Contents14502)13621)1013 1000631_068Exterior dimensions and weightsLength in mm Width in mm Height in mm Front track width in mm Rear track width in mm Wheelbase in mm Kerb weight in kg Gross vehicle weight in kg 4177 18324) 1355 1572 1552 2505 13955) 16405)Inner dimensions and other specificationsFront cabin width in mm Front headroom in mm Front shoulder width in mm Through-loading width in mm Load sill height in mm Boot capacity in l Drag coefficient cw Capacity of fuel tank in l Front wheel drive/quattro 14502) 9863) 13621) 1000 810 280 0,306) 50/55Shoulder room width Elbow room width 3) Maximum headroom 4) Excluding mirror 5) With 2.0l TFSI engine, front wheel drive and manual gearbox 6) When the convertible top is closed1) 2)All dimensions are given in millimetres and refer to the unladen weight of the vehicle.7 BackForwards Ξ ContentsBodyIntroductionThe bodyshell of the TT Roadster represents a new evolution of the Audi Space Frame (ASF) based on the modular transverse matrix (MQB). Ultra high strength components made from hot-stamped steel reinforce the front end and the occupant cell floor. Aluminium is used in the cell as well as in all outer skin parts and attachments in the form of three typical semi-finished products - die-cast nodal elements, extruded profiles and sheet metal. In total, 50 % cold formed steel and 11 % hot formed steel are used in the new TT Roadster. The 37 % share of aluminium is distributed as follows: • 21% sheet aluminium • 8% die-cast aluminium • 8% aluminium profile Altogether, the body of the Audi TT Roadster including attachments weighs 336 kg. The crash safety performance of the TT Roadster has been further improved thanks to the intelligent hybrid construction concept.Outer skinThe entire outer skin of the Audi TT Roadster is made of aluminium. In detail, it comprises: • • • • • Front wings Side walls Bonnet attachments Doors Boot lidKey:Sheet aluminium Die-cast aluminium Aluminium section Ultrahigh strength steel (hot-formed) Advanced high strength steel High strength steel Low strength steel8 BackForwards Ξ ContentsDesignThe occupant cell of the Audi TT Roadster weighs 54 kg. It is an aluminium lattice structure where 10 castings form the nodal points of the bodyshell. Large nodal elements at the A posts connect the sill, window cross member and the upper longitudinal section in the front end. The following components are made of die-cast aluminium: • • • • • A post Top front roof frame nodal element Inner B post Inner B post connecting part Rear roof frame nodal element631_003 9 BackForwards Ξ ContentsBody reinforcementsA postCompared with the Coupé, the body of the TT Roadster has been modified in key areas. To provide additional stiffening, an inner panel made of high strength steel and a reinforcing tube are concealed behind the die-cast aluminium A posts. The reinforcing tube is made from ultra high strength hot stamped steel. These components offer the occupants a high level of safety in the event of a rollover.Diagonal strutsAdditional V-shaped steel struts reinforce the front and rear axle carriers and connect them to the bodyshell. These supporting measures provide a high level of vehicle rigidity and vibration comfort.Diagonal strutsSound-absorbing panThe Audi TT Roadster has an aluminium sound-absorbing pan, which not only reinforces the front end structure, but also provides sound insulation on diesel models.Sound-absorbing pan10631_080 BackForwards Ξ ContentsRear bulkheadIn the Audi TT Roadster, a solid bulkhead comprising 2 box profiles separates the occupant cell from the luggage compartment and replaces the bottom cross member found on the Coupé. The top section of the bulkhead houses the steel rollover bars, a wellknown and classic design feature of the Roadster. Mounting plates seal the openings in the rear bulkhead, which features through-loading as standard.Door sills of the Audi TT Coupé631_004Door sillDoor sills of the Audi TT Roadster631_081The door sills made from extruded aluminium profiles give extra strength. Due to the absence of a roof structure, it is necessary for the door sills of the TT Roadster to be thicker and to be integrated into the structure by means of die-cast nodes in the B post. The modified interior geometry provides much higher strength.631_082 11 BackForwards Ξ ContentsConvertible topOverviewAs with the outgoing generation, the new Audi TT Roadster features a classical soft top with Z fold system. While opening, the soft top forms a ‑Z shape as it folds together into a flat package, which is stored in an aluminium tray behind the seats. A feature of this space-saving folding system is that the front section of the soft top folds over the fabric as a cover and locks flush with the vehicle body. With parts made from magnesium, aluminum, steel and plastic, the soft top weighs just 39 kilogrammes and is 3 kilogrammes lighter than its predecessor. This has a positive impact on the gross vehicle weight and the centre of mass of the open‑top two seater.631_022 12 BackForwards Ξ ContentsConvertible top fabricThe acoustic top is already fitted as standard on the Audi TT Roadster and Audi TTS Roadster and is noted for its extremely good thermal insulation and low noise level, especially in the airflow frequency range. The thick fleece layer on the black inner headlining adds comfort. Depending on frequency, the noise level in the interior has been reduced by up to 6 dB compared with the predecessor. The aerials for radio reception are hidden from view by the convertible top. Thanks to an elaborate clamping system, the closed top is completely taut even at high speeds – it features a homogeneous look that conceals the cross bows.InsulationConvertible top fabricInterior liningBagConvertible top bow tube631_074Rear window defrosterThe heated glass rear window is a component part of the convertible top and cannot be replaced individually if damaged. In this case, the complete convertible top must be replaced.Convertible top flapsThe side openings for the soft top mechanism drive are covered by the convertible top flaps, eliminating the need for a tonneau cover or convertible top box lid.631_073631_072 13 BackForwards Ξ ContentsComponentsConvertible top frameThe main bearing of the convertible top frame is bolted to the inside of the B post by 3 screws on the left and right. The convertible top linkage comprises the following components: • A front convertible top bow made of magnesium alloy • 3 convertible top bow tubes made of precision steel • A tensioning strut made of aluminium profile • Multiple roof side bars and main side bars made of flat steel 2 guide belts hold the convertible top bows in position and 2 tensioning belts hold the tensioning struts2nd bow Front roof bow 3rd bow Corner bowLeft guide beltTensioning strut Tensioning straps631_075Servicing the convertible top driveIf the gear drive is damaged, a repair kit is available. It comprises 2 gear segments, the necessary screws and threaded bushes. With the aid of the repair kit, the gear segments on the left and right main bearings can be replaced separately.631_078 14 BackForwards Ξ ContentsZ-folding2 electric motors in the main bearing rotate a gear segment main bearing and thus pivot the main side bars. These motors and the roof side bars are designed as a multi-jointed linkage and ensure that the convertible top folds in 3 layers over one another in the convertible top compartment. It was possible to dispense with an elaborate hydraulic system because the main side bars are driven directly by the electric motors.631_077WindbreakTo reduce airflow in the interior when the convertible top is open, the TT Roadster can be equipped with an electrically extendable windbreak. It is possible to install and remove both the windbreak, the windbreak support and the convertible top windbreak motor V186 with the convertible top fitted.631_076 15 BackForwards Ξ ContentsConvertible top control unitInstallation locationsThe component parts of the system are summarised on the following two pages.Control unit in dash panel insert J285 (graphical display of convertible top status)Convertible top latch open switch F294Convertible top latch closed switch F295Convertible top locking motor V223Convertible top front switch F202Convertible top stowed switch F171Convertible top operation motor V8216 BackFront convertible top latch switch F172 Convertible top latch ready switch F542Forwards Ξ ContentsGlove compartment locking motor V224Convertible top operating switch E137Cabriolet windbreak switch E278Cabriolet windbreak motor V186631_070Convertible top operation motor 2 V576Convertible top control unit J256631_069 17 BackForwards Ξ ContentsDisplays and operation of convertible topThe soft top of the Audi TT Roadster has an all-electric drive. The convertible top is driven by 2 electric motors including a gear unit mounted on the left and right of the convertible top main bearing. The convertible top is controlled by the convertible top control unit J256. Objects stored in the convertible top box can cause damage to the vehicle during convertible top operation. The convertible top is only available as a fully automatic convertible top.Basics of convertible top operating switch E137The convertible top operating switch E137 has 2 actuation directions. The convertible top is opened by pulling the convertible top operating switch E137 and closed by pushing it. The convertible top can operate both manually and automatically.631_007Convertible top operating switch E137Manual convertible top operating cycle In manual mode, the convertible top operating switch E137 must be actuated, e.g. pushed or pulled, continuously while the convertible top operating cycle is in progress. If the convertible top operating switch E137 is released, the convertible top operating cycle stops instantaneously. If the switch is actuated again, the convertible top operating cycle is continued. In this case, the convertible top control unit J256 initiates "soft starting" of the convertible top by motors V82 (convertible top operating motor) and V576 (convertible top operating motor 2). The purpose of the "soft start" function is to ensure that the convertible top does not wobble or stutter when moving into an intermediate position, but rather starts evenly and smoothly. Continuing to actuate the convertible top operating switch E137 after the convertible top has been fully opened or closed causes the side windows to close completely. If the convertible top operating switch E137 is released, the side windows will stop moving. If the convertible top operating switch E137 is now re-actuated continuously in the corresponding direction within approx. 5 seconds, the side windows will close completely. The 5 seconds are calculated from the time the convertible top control unit J256 detects that the convertible top is completely open or closed. Vehicles for several markets including the USA are an exception: the side windows do not close automatically when the convertible top closes. If the convertible top is closed and the convertible top operating switch E137 is pulled and then released again (not an automatic cycle) in order to open the convertible top, all side windows are lowered by a certain amount. The convertible top operating cycle does not start. If the convertible top operating switch E137 is now pressed continuously within the next 5 seconds, the side windows close again. The function is not available in several markets such as the USA due to legal requirements.Automatic convertible top operation To initiate automatic operation, the convertible top operating switch E137 must be actuated briefly (for less than 0.5 seconds) at a vehicle speed of between approx. 6 and 50 kph. In this case, the convertible top opens and closes automatically depending on the direction of actuation. If the convertible top operating switch E137 is re-actuated during automatic operation of the convertible top, the automatic convertible top operating cycle will stop. The convertible top operating cycle can then be restarted, manually or automatically. Automatic operation of the convertible top is not possible when the vehicle is stationary and travelling faster than 50 kph. The side windows also close at the end of the automatic convertible top operating cycle. Vehicles for several markets including the USA are an exception: the side windows do not close automatically when the convertible top closes.18 BackForwards Ξ ContentsGraphical displays for convertible top operating cycle in instrument clusterThere is no separate warning lamp for the convertible top operating cycle in the Audi TT Roadster. Instead, the convertible top operating cycle is indicated graphically in the instrument cluster. Depending on setting in the Audi virtual cockpit, the displays are positioned in the centre or at the side. When the convertible top operating cycle is started, a graphical display representing the vehicle with the convertible top appears in the instrument cluster. A curved arrow over the convertible top indicates the direction in which the convertible top is moving: • Arrow tip pointing backwards: convertible top is opening. • Arrow tip pointing forwards: convertible top is closing. The convertible top is shown in red, as is the case with an open door or flap/lid.631_031Display for automatic convertible top operating cycleDisplay for discontinued convertible top operating cycle631_032631_033In an automatic convertible top operating cycle, and "A" is displayed at the start of the arrow.If no arrow is displayed over the convertible top, the convertible top operating cycle has been initiated but discontinued. The convertible top is therefore currently in an intermediate position.Reference For further information on the Audi virtual cockpit, refer to Self Study Programme 628 "Audi virtual cockpit".19 BackDisplays for complete convertible top operating cycle If the convertible top operating cycle has been completed, the status of the convertible top (opened or closed) is indicated for approx. 2 seconds. Convertible top operating cycle complete – convertible top openForwards Ξ ContentsAn audible signal sounds at the same time.Convertible top operating cycle complete – convertible top closed631_035631_034Displays when convertible top operation is not possibleIf the convertible top cannot be operated, this is indicated in the instrument cluster. An audible signal sounds at the same time. A warning is given and 7 different messages are displayed.Warning display The warning is given if the convertible top is in an intermediate position and if the event memory simultaneously contains a static entry and the vehicle is travelling faster than 5 kph. In addition to the warning, the yellow central warning lamp comes on.Yellow central warning lampDisplay in driver information tab and warning lamps tab highlighted redYellow vehicle/convertible top icon in the status lineDisplayed textConvertible top: Fault! You can continue driving (limited functionality) See Owner's Manual631_03920 BackMessage displays Other reasons why the convertible top cannot be operated are displayed as messages. • When messages on the convertible top are displayed, the yellow central warning lamp is not activated. • When these messages are displayed, the vehicle/convertible top icon appears in the status line. • Message texts are not included in the driver information and warning lamps tab.Forwards Ξ ContentsIf the convertible top is in an end position (open or closed) and a convertible top operating cycle is initiated in the same direction as the limit stop, "no" actions are initiated and no messages are displayed.This message is displayed if the convertible top is in an end position and the convertible top operating switch E137 is actuated at a speed of 50 kph or higher in the opposite direction to the limit stop. In this case, a convertible top operating cycle is not started.Convertible top: no operation possible. Speed too high.631_038This message is displayed in the following situations: • If a convertible top operating cycle is active, the vehicle's speed increases to 55 kph and the convertible top operating cycle is discontinued. • Or: If a convertible top operating cycle is active, the vehicle's speed increases to 55 kph and the convertible top still moves into its limit position. For a list of conditions under which the convertible top still moves into its limit position at 55 kph or higher (refer to page 29). • Or: If a convertible top operating cycle was active or discontinued (convertible top operating switch E137 was released) and therefore the convertible top is in an intermediate position. The vehicle's speed subsequently increases to at least 50 kph and the convertible top operating cycle is to be continued (switch is again actuated). In this case, the convertible top operating cycle is not resumed.Convertible top: not in limit position. Speed too high.631_03821 BackThis message is displayed if the ambient temperature is below -15 °C, the convertible top is closed and the convertible top operating switch E137 is actuated in the "open" direction. An open convertible top can also be closed at temperatures below -15 °C.Forwards Ξ ContentsConvertible top: no operation possible. Ambient temperature too low.631_037This message is displayed if a static event has occurred preventing operation of the convertible top when the convertible top operating switch E137 is actuated.Convertible top: no operation possible.631_036This message appears if the convertible top operating switch E137 is actuated and the battery voltage has dropped below a certain value with the ignition turned on and the engine stationary. After starting the engine, the convertible top can again be opened or closed.Convertible top: no operation possible. Engine must be running.631_03622 BackThis message is displayed if the overload circuit breaker (thermal protection) is active and the convertible top operating switch E137 is actuated.Forwards Ξ ContentsConvertible top: no operation possible631_036This message is displayed if the convertible top control unit J256 has registered a static event, if a limit position (open or closed) has been reached and if the actuated convertible top operating switch E137 is released.Convertible top: Fault! You can continue driving631_03623 BackForwards Ξ ContentsConvertible top opening sequenceTo be able to open the convertible top, the following conditions must be met: • The vehicle must be travelling slower than 50 kph. • The ignition must be on. • The ambient temperature must be above -15 °C. • The battery must have sufficient voltage.Initial situation: the convertible top is closedStarting the opening cycle If all conditions have been met, the opening cycle can be initiated by continuously pulling the convertible top operating switch E137. If the vehicle is travelling at a speed of between 6 and 50 kph, the automatic convertible top operating cycle can be started by briefly pulling the switch (for less than 0.5 seconds).631_008Pull convertible top operating switch E137First, the side windows open a preset distance.631_023Display in instrument cluster A graphical display then appears in the instrument cluster showing the vehicle/convertible top icon and a curved arrow. The arrow tip is pointing backwards. When an automatic convertible top operating cycle is in progress, an "A" is displayed at the start of the arrow. If the rear window heater is on, it is switched off. The rear window heater can only be switched on if the convertible top is fully closed.631_03224 BackConvertible top opening Next, the catch hook in the upper part of the lock in the window frame area moves upwards. Then the convertible top moves back.Forwards Ξ Contents631_024During this movement the catch hook closes again. The L/H and R/H convertible top flaps, which are mechanically actuated by Bowden cables, close as soon as the convertible top is "nearly" stowed. The convertible top folds completely into the convertible top box.631_025Finally, the side windows close completely.631_026Display in instrument cluster An audible signal as well as a graphical display in the instrument cluster indicate that the convertible top operating cycle is complete and the convertible top is fully open.631_03525 BackForwards Ξ ContentsConvertible top closing sequenceTo be able to close the convertible top, the following conditions must be met: • The vehicle must be travelling slower than 50 kph. • The ignition must be on • The battery must have sufficient voltage.Initial situation: the convertible top is openStarting the closing cycle If all conditions have been met, the closing cycle can be initiated by continuously pushing the convertible top operating switch E137. If the vehicle is travelling at a speed of between 6 and 50 kph, the automatic convertible top operating cycle can be started by briefly pushing the switch (for less than 0.5 seconds).631_009Push convertible top operating switch E137First, the side windows open a preset distance.631_027Display in instrument cluster A graphical display then appears in the instrument cluster showing the vehicle/convertible top icon and a curved arrow. The arrow tip is pointing forward. When an automatic convertible top operating cycle is in progress, an "A" is displayed at the start of the arrow.631_04026 BackConvertible top closing The convertible top is lifted out of the convertible top box and, at the same time, the covers on the left and right are opened mechanically by Bowden cables.Forwards Ξ Contents631_028The catch hook moves upwards (1) and the convertible top continues to close until it is in proximity to the windscreen frame. The catch hook closes (2), pulling the convertible top onto the windscreen frame, and locks the convertible top in place.631_029If the convertible top operating switch E137 is kept pressed, the side windows close. This function is not available in several markets such as the USA due to legal requirements. The side windows also close during automatic operation of the convertible top. In this case, too, the function is not available in several markets such as the USA due to legal requirements. The rear window heat can be switched on again.631_030Display in instrument cluster An audible signal as well as a graphical display in the instrument cluster indicate that the convertible top operating cycle is complete and the convertible top is fully closed.631_03427 BackForwards Ξ ContentsOperating the convertible top with the car key via the lock cylinder on the driver's doorThe convertible top can be opened or closed voa the driver's door locking cylinder. This can be done using the integrated emergency key or the socalled wallet key.Opening To open the convertible top, the following conditions must be met: • The vehicle must be travelling at 0 kph. • The battery must have sufficient voltage. • The ambient temperature must be above -15 °C. If the car key in now turned in the "open" direction again within 2 seconds and held in this position (2.), the convertible top operating cycle will start. The car key must be kept held in the "open" position while the convertible top operating cycle is in progress. When the car key is released, the convertible top operating cycle stops instantaneously. To resume the convertible top opening cycle, the car key must again be turned in the "open" direction and held in this position. If the car key is turned in the "close" direction and held in this position, the convertible top will close again.To open the convertible top, first unlock the vehicle with the car key. Then insert the car key into the lock cylinder on the driver's door and turn it in the "open" direction (1.).Turn key again within 2 seconds631_042Closing To close the convertible top, the following conditions must be met: • The vehicle must be travelling at 0 kph. • The battery must have sufficient voltage. Insert the car key into the lock cylinder on the driver's door and turn it in the "close" direction (1.). If the car key in now turned in the "close" direction again within 2 seconds and held in this position (2.), the convertible top operating cycle will start. The car key must be kept held in the "close" position while the convertible top operating cycle is in progress. When the car key is released, the convertible top operating cycle stops instantaneously. To resume the convertible top operating cycle, the car key must again be turned in the "close" direction and held in this position. If the car key is turned in the "open" direction and held in this position, the convertible top will open again.Turn key again within 2 seconds631_041Note If the convertible top is actuated via the car key, the convertible top will start after a delay.28 BackForwards Ξ ContentsOperating the convertible top while drivingThe convertible top can be opened or closed using the convertible top operating switch E137 up to a speed of less than 50 kph. If the vehicle's speed rises to 55 kph while a convertible top operating cycle is in progress, the convertible top operating cycle will normally be discontinued (see below for exceptions) and the driver alerted by audible and visual warnings.631_058Convertible top operating cycle at high speedIf the vehicle's speed rises to 55 kph while a convertible top operating cycle is in progress, the convertible top behaves differently when opening and closing.Convertible top: no operation possible. Speed too high.Convertible top: not in limit position. Speed too high.631_038631_038Opening (manual mode or automatic cycle) If the convertible top is opening and the vehicle's speed increases to 55 kph or higher during the opening cycle, the convertible top operating cycle is not discontinued. The convertible top is fully opened.Closing (manual mode or automatic cycle) If the convertible top is closing and the vehicle's speed increases to 55 kph while the closing cycle is in progress, the convertible top operating cycle is discontinued. The convertible top comes to a halt in its momentary position. The convertible top operating cycle cannot be restarted until the vehicle's speed has dropped to below 50 kph again. Exception: The convertible top operating cycle is not discontinued if it has been initiated using the convertible top operating switch E137, if the convertible top is moving forwards and the convertible top latch ready switch F542 has been actuated. If the vehicle's speed increases to 55 kph after this, the convertible top is fully closed. A convertible top operating cycle cannot be initiated if the vehicle is travelling at a speed of 50 kph or higher. In this case too, the driver is alerted by audible and visual warnings.Exception: A convertible top operating cycle is discontinued if the vehicle has reached a speed of 55 kph and the convertible top has still not left the front zone, with the result that the convertible top front switch F202 is still detecting "convertible top, front". In this case, the convertible top operating cycle is discontinued or is not initiated. The convertible top operating cycle cannot be restarted until the vehicle's speed has dropped to below 50 kph again.29 BackForwards Ξ ContentsComponents of the convertible top control unitConvertible top operating switch E137The convertible top operating switch is integrated in the centre console. If the convertible top operating switch E137 sends the "actuated" signal for about 60 seconds (timeout), the static event "convertible top opening/closing switch - implausible signal" is registered in the event memory. This can occur, for example, if the convertible top operating switch E137 is inadvertently actuated continuously by an object (briefcase, mobile phone etc.). As soon as the convertible top operating switch E137 is free again, the event memory entry changes to "sporadic". It is again possible to operate the convertible top.631_007Convertible top operating switch E137Convertible top flapsThe L/H and R/H convertible top flaps are actuated mechanically by Bowden cables and therefore have no electrics/electronics. When the convertible top is open, the convertible top flaps cover the main bearings, the convertible top operating motor V82 and convertible top operating motor 2 V576. If the convertible top is closed, the convertible top flaps are open.631_013L/H convertible top flapR/H convertible top flap30 BackForwards Ξ ContentsConvertible top locking motor V223The convertible top locking motor V223 is mounted to the convertible top in the middle as seen in the direction of travel. The motor V223 is mounted on a bracket together with a shift gate, the convertible top latch open switch F294, the convertible top latch closed switch F295, the catch hook and a permanent magnet. If the permanent magnet is within the detection range of the convertible top latch ready switch F542 (refer to page 33), the convertible top control unit J256 instructs the convertible top locking motor V223 to open or close the catch hook depending on the direction of actuation.View from aboveMounting bracket Permanent magnet Catch hookShift gateConvertible top locking motor V223Convertible top latch open switch F294Convertible top latch closed switch F295Electrical connection631_049View from belowMounting bracketInsertion opening for the crank after emergency closing of the convertible topCatch hookConvertible top locking motor V223631_06031 BackForwards Ξ ContentsConvertible top latch open switch F294Convertible top latch open switch F294 is mounted to the bracket of convertible top locking motor V223. Convertible top latch open switch F294 is a micro switch. A shift gate is mounted to the convertible top locking motor V223 (refer to page 31). The shift gate moves depending on the direction of rotation of the motor (open/close). If the convertible top locking motor V223 has fully opened the catch hook, the shift gate actuates the convertible top latch open switch F294. In this position, the convertible top operation control unit J256 detects "tensioning strut up".Convertible top latch open switch F294 – actuated631_050Convertible top box lid closed switch F295Convertible top box lid closed switch F295 is mounted to the bracket of convertible top locking motor V223. Convertible top box lid open switch F295 is a micro switch. A shift gate is mounted to the convertible top locking motor V223 (refer to page 31). The shift gate moves depending on the direction of rotation of the motor (open/close). If the convertible top locking motor V223 has fully closed the catch hook, the shift gate actuates the convertible top box lid closed switch F295. In this position, the convertible top operation control unit J256 detects "tensioning strut (catch hook) closed".Convertible top lock closed switch F295 – actuated631_05132 BackForwards Ξ ContentsConvertible top latch ready switch F542The convertible top latch ready switch F542 is integrated in the lock of the convertible top latch on the window frame. A permanent magnet is mounted to the mounting bracket for the convertible top locking motor V223. If the convertible top is in the front position and the permanent magnet is within the detection range of the switch, the convertible top control unit J256 instructs the convertible top locking motor V223 to open or close the catch hook depending on the direction of actuation. Design The convertible top latch ready switch F542 is a reed sensor. Reed sensors comprise a glass tube containing fused ferromagnetic tab contacts. In the rest state the tab contacts are spaced apart. When a magnetic field acts on the reed sensor, a north pole and a south pole form on the tab contacts and the tab contacts attract each other – the reed sensor is closed.Lock of convertible top latch on window frameConvertible top latch ready switch F542 Magnetic field of permanent magnetElectrical connection631_054Catch hookPermanent magnet in the mounting bracket of the convertible top locking motor V223Front convertible top latch switch F172The front convertible top latch switch F172 is integrated in the convertible top latch lock on the window frame. The switch in question is a micro switch. If the catch hook is fully engaged inside the lock, the catch hook actuates a rocker. This rocker actuates the front convertible top latch switch F172. The convertible top control unit J256 is thus able to detect when the catch hook is engaged in the lock.Rocker switchCatch hookFront convertible top latch switch F172631_053 33 BackForwards Ξ ContentsConvertible top control unit J256The convertible top control unit J256 has the address word 26 – Electronic roof operation. The convertible top control unit is installed in the direction of travel on the left hand side of the vehicle in the luggage compartment, behind the trim. The convertible top control unit J256 is integrated in the vehicle's bus system via the convenience CAN bus and exchanges data with other systems across this bus. The convertible top control unit J256 controls and monitors each individual convertible top operating cycle. It receives and evaluates information from the sensors and other bus users and controls the actuators accordingly. The convertible top control unit J256 is also responsible for system diagnostics. If irregularities are detected within the system or if signals are received at the wrong time, the convertible top operating cycle or windbreak operating cycle is stopped. An event is registered and a message is displayed in the instrument cluster.631_045In luggage compartment, on left: convertible top control unit J256Glove compartment locking motor V224If the vehicle is locked or unlocked, the onboard power supply control unit J519 places this information onto the CAN bus. The convertible top control unit J256 retrieves this information and instructs the glove compartment locking motor V224 to unlock or lock the glove compartment lid. The glove compartment locking motor V224 is discretely wired to the convertible top control unit J256. The convertible top control unit J256 monitors the glove compartment locking motor V224 for short circuit and open circuit.631_046In glove compartment lid: glove compartment locking motor V22434 BackForwards Ξ ContentsConvertible top front switch F202The convertible top front switch F202 is a Hall effect sensor and is installed in the direction of the travel, on the stationary part of the main bearing bolted to the body on the left-hand side of the vehicle. The front convertible top switch F202 is attached to the top of the main bearing in the installation postion. The Hall effect sensor is actuated by ferromagnetic metals. This means that a change in voltage occurs when the movable metal arm of the convertible top mechanism comes within the detection range of the Hall effect sensor. The convertible top control unit J256 evaluates this signal and detects "convertible top, front".Convertible top front switch F202631_048Convertible top stowed switch F171Convertible top stowed switch F171The convertible top stowed switch F171 is a Hall effect sensor and is installed in the direction of the travel, on the stationary part of the main bearing bolted to the body on the left-hand side of the vehicle. The convertible top stowed switch F171 is attached to the bottom of the main bearing in the installation postion. The Hall effect sensor is actuated by ferromagnetic metals. This means that a change in voltage occurs when the movable metal arm of the convertible top mechanism comes within the detection range of the Hall effect sensor. The convertible top control unit J256 evaluates this signal and detects "convertible top stowed in convertible top box".35 BackForwards Ξ ContentsConvertible top operating motor V82 and convertible top operating motor 2 V576The motors - convertible top operating motor V82 and convertible top operating motor 2 V576 - are mounted on the left and right of the convertible top main bearing. An additional gear is flangemounted to both motors. The additional gears control the "movement" of the convertible top. Each of the two motors has 2 Hall effect sensors. The Hall effect sensors register the speed of the motors.On L/H side of vehicle: convertible top operation motor V82On R/H side of vehicle: convertible top operation motor 2 V576631_047Integrated Hall effect sensors The direction of rotation of motors V82 and V576 is also determined by the 2 Hall effect sensors arranged at a 90° offset in motors V82 and V576. The Hall effect sensors in "convertible top operating motor V82" and "convertible top operating motor 2 V576" cannot be replaced separately. The convertible top control unit J256 continuously monitors the data generated by the Hall effect sensors and compares the values of both motors. If the convertible top control unit J256 detects a difference of about 65 pulses between the two motors (refer to page 38), the convertible top operating cycle is disabled in this direction of movement. The driver is alerted by audible and visual warnings. However, the convertible top can still be operated in the opposite direction. If a difference is also detected in this direction of movement, it will not be possible to operate the convertible top. The driver is alerted by audible and visual warnings.Convertible top: Fault! You can continue drivingConvertible top: Fault! You can continue driving (limited functionality) See Owner's Manual631_036631_039This message is displayed when the convertible top reaches its limit position. For further information about the conditions governing when the message is displayed, please refer to page 23.This warning is displayed when the convertible top is in an intermediate position. For further information about the conditions governing when the warning is displayed, please refer to page 20.36 BackEffects of signal loss Even if one of the 4 Hall effect sensors fails, it is still possible to operate the convertible top. In this case, the fault is registered in the event memory. However, no message is displayed in the instrument cluster. If 2 of the 4 Hall effect sensors fails, safe operation of the convertible top will no longer be possible.Forwards Ξ ContentsThis is why it is no longer possible to operate the convertible top and the driver is alerted by audible and visual warnings (see figures below on page 36).Installation of the motors The "convertible top operating motor V82" and "convertible top operating motor 2 V576" on the left and right are identical. Given that the motors turn in different directions when installed, however, the side on which the motors are located must be indicated to the motors after they are installed. This is done by "pinning" the connectors. The R/H motor as seen in the direction of travel (convertible top operating motor V82) is connected to positive (+) at PIN 10 and the L/H motor as seen in the direction of travel (convertible top operating motor 2 V576) is connected to negative (-) at PIN 10.Key: J256 V82 V576 Convertible top operation control unit Convertible top operation motor Convertible top operation motor 2631_052Thermal cutout The "convertible top operating motor V82" and "convertible top operating motor 2 V576" are protected against overload by a thermal cutout. For this reason, the convertible top control unit J256 monitors the runtime of the motors and shuts the motors off, as required. The number of convertible top operating cycles until deployment of the thermal cutout depends on: • Ambient temperature • Battery voltage • Ease of movement of the convertible top mechanism (tolerances)631_036Convertible top: no operation possibleActivation The convertible top's thermal cutout is activated in 2 stages depending on power consumption. Stage 1: starts if the convertible top has been in continuous operation for between 60 and 120 seconds and the convertible top is closed at this point in time. After stage 1, there is a delay of 5 minutes until it is again possible to operate the convertible top. Stage 2: starts if the convertible top has been in continuous operation for between 70 and 140 seconds. The momentary position of the convertible top is irrelevant. After stage 2, there is a delay of 8.5 minutes until it is again possible to operate the convertible top.37 BackInitialising the motors As mentioned, the position of the "convertible top operating motor V82" and "convertible top operating motor 2 V576" is defined by sensors which register the angular revolutions of the motors. The angular revolutions of the motors are counted by using counting pulses. The duration of a complete convertible top operating cycle (convertible top front to convertible top rear and conversely) is about 1300 pulses. A deviation of about 65 pulses is classified as an event. A deviation in the number of pulses in the motors can occur for the following reasons: • The number of pulses of both motors may deviate from one another during the operating time of the convertible top due to the convertible top moving back and forth several times without reaching an end position. • No further pulses are counted after the convertible top control unit J256 has entered sleep mode. If forces act on the convertible top in this mode and the convertible top is in an intermediate position, the convertible top may collapse into itself depending on its position. In certain situations the own weight of the convertible top may be enough to cause this. Depending on the position of the convertible top after collapsing, the convertible top control unit J256 may not be able to detect the current position of the motors.Forwards Ξ ContentsIf the vehicle is parked with the convertible top open (down), the system is initialised after the ignition is turned on and provided that the vehicle is travelling forwards at a speed of about 6 kph. If the vehicle is parked with the convertible top closed (up), the system is initialised after the ignition is turned on. Initialising the motors in their respective end positions (convertible top open/closed), resets the start of pulse counting to a defined initial value. This serves to eliminate irrelevant angular deviations (pulse deviations) during normal convertible top operating cycles.631_078Collapsing of the convertible top If the convertible top is in an intermediate position, the convertible top may collapse depending on its position. • The ignition is off and the convertible top control unit J256 enters sleep mode. • The ignition is off and the convertible top operating switch E137 is pushed or pulled for about 5 seconds.631_059Note Caution: do not reach into the convertible top linkage or other moving parts when the convertible top collapses. There is a danger of injury.38 BackForwards Ξ ContentsWindbreakA power-operated windbreak is available for the Audi TT Roadster as optional equipment. The windbreak can help to reduce air turbulence in the occupant cell and thus enhances ride comfort. The windbreak can be manually retracted and extended (by continuously pushing or pulling the switch) and retracted in automatic mode (by briefly touching the switch).Power operated windbreak631_010Operation The windbreak can be extended and retracted using the Cabriolet windbreak switch E278. The windbreak can only be extended and retracted if the convertible top is fully open. If the windbreak is extended and the convertible top is closed, the windbreak retracts automatically. This allows "one-touch operation" with the convertible top operating switch E137 when closing the convertible top.631_011Convertible top operating switch E137 Cabriolet windbreak switch E27839 BackForwards Ξ ContentsComponents of the windbreakCabriolet windbreak switch E278 The Cabriolet windbreak switch E278 has 2 operating directions. The windbreak is retracted by pushing the switch and extended by pulling the switch. The Cabriolet windbreak switch E278 is installed in the centre console, to the right of the convertible top operating switch E137.631_012Manual operation During manual operation of the windbreak, the Cabriolet windbreak switch E278 must be continuously actuated, e.g. pushed or pulled. If the Cabriolet windbreak switch E278 is released, the windbreak stops instantaneously. If the Cabriolet windbreak switch E278 is re-actuated, the windbreak continues to travel in the corresponding direction.Automatic operation The windbreak can be retracted in manual mode, but cannot be extended. For automatic operation of the windbreak, the Cabriolet windbreak switch E278 must be pushed briefly (for less than 0.5 seconds). In this case, the windbreak retracts automatically. If the Cabriolet windbreak switch E278 is again actuated during automatic operation of the windbreak, the windbreak stops. Automatic or manual operation of the windbreak can be resumed by re-actuating the Cabriolet windbreak switch E278.Activation mechanism The convertible top control unit J256 controls the windbreak switch E278 and monitors its actuation time (timeout). If the Cabriolet windbreak switch E278 sends the "actuated" signal for about 60 seconds (timeout), the static event "convertible top lifting/lowering switch - implausible signal" is registered in the event memory. This can, for example, be the case if the Cabriolet windbreak switch E278 is involuntarily actuated continuously by an object (briefcase, mobile phone etc.). If the object has been removed and the Cabriolet windbreak switch E278 is again free, the event memory entry changes to "sporadic". It its again possible to operate the windbreak.631_061Convertible top control unit J25640 BackCabriolet windbreak motor V186 The windbreak is driven by the Cabriolet windbreak motor V186.Forwards Ξ ContentsThe convertible top control unit J256 controls and monitors the convertible top windbreak motor V186.Direction of travelCabriolet windbreak motor V186631_044Thermal cutout The convertible top windbreak motor V186 is protected against overload (thermal cut-out). For this reason, the convertible top control unit J256 monitors the runtime of the motors and shuts the motors off, as required. The thermal cutout is activated when the windbreak has been running continuously for about a minute. There follows a timeout of about 7 minutes until the windbreak can again be operated. If a thermal cut-out for the windbreak is active, no message is displayed in the instrument cluster.41 BackForwards Ξ ContentsEmergency operation of convertible topIn the event of a malfunction, the convertible top can be closed manually.Closing the convertible topThe convertible top should, where possible, be emergency operated by 2 persons. During all stages of emergency convertible top operation there is a risk of trapping hands or causing injury to other persons. Do not reach into the convertible top linkage or other moving parts. Conditions: • The parking brake must be closed. • All side windows are lowered. • The function is deactivated.Tools required The screwdrivers, the cranks and the hexagon socket wrenches from the tool kit are required for manual operation of the convertible top. Take the required tools from the tool kit and keep them at the ready. Depending on vehicle trim, the tool kit is located at different positions in the luggage compartment.631_0141. Separate push rod from ball head in direction of arrow631_0152. Raise convertible top flaps Raise the convertible top flaps and stow the push rod in the designated recess. Repeat both procedures on the other side of the vehicle.631_016Note During the entire duration of emergency operation make sure that both covers are fully open and that the push rods have been stowed in the recess, in order to avoid causing damage when opening the convertible top.42 Back3. Undo screws Remove the screw using the hexagon socket wrench from the tool kit by turning it fully in the direction of the arrow. Repeat the procedure on the other side. 4. Lift out the convertible topForwards Ξ ContentsLift the convertible top out of the convertible top compartment, if possible with the aid of a second person, and pull it out completely.631_017631_0185. Place the convertible top on the window frame Push the convertible top in the direction of the arrow onto the windscreen frame.6. Remove cover Remove the cover at the centre of the convertible top using the screwdriver from the tool kit.631_019631_0207. Lock the convertible top Insert the crank from the tool kit into the opening in the convertible top locking motor V223 until the stop ring is in abutment (see magnifying glass). Pull the convertible top down at the side until it is fully seated on the window frame. Turn the crank in the direction of the arrow (clockwise) until the convertible top is fully locked. Then remove the crank.631_021Note During all stages of emergency convertible top operation, there is a risk of trapping hands or causing injury to other persons.Reference Please refer to the Owner’s Manual for further information on emergency operation.43 BackForwards Ξ ContentsPassive safetyComponentsDepending on country version and trim level, the passive occupant and pedestrian protection system in the Audi TT Roadster can comprise the following components and systems: • • • • • • • • • • • • • • • • • • • • Airbag control unit Driver airbag Front passenger airbag Front side airbags (head-thorax airbag) Knee airbag, driver and front passenger sides Front airbag crash sensors Front crash sensors for side crash detection (pressure sensors) Rear crash sensor for side crash detection (acceleration sensor) Pedestrian protection crash sensor (acceleration sensor) Crash sensors for pedestrian protection (pressure sensors) Front inertia-reel seat belts with pyrotechnic belt pretensioners Front inertia-reel seat belts with active belt force limiters Seat belt warning for all seats Seat belt switches on all seats in the seat belt buckles Seat occupancy sensor in front passenger seat Airbag disabling switch, front passenger side Front passenger airbag OFF and ON warning lamps Driver and front passenger seat position sensors Trigger for pedestrian protection system Battery disconnectIn-car airbagsDriver airbagSide airbags (head-thorax airbags)The side airbags, side airbag igniter, driver side N199 and side airbag igniter, front passenger side N200 are configured as headthorax airbags. The head-thorax airbags are designed to help protect not only the body, but also the head of the front occupants. By integrating the side airbags in the front seat backs, the airbags are positioned in proximity to the front occupants irrespective of the seat setting.Knee airbagRollover protection systemThe Audi TT Roadster comes equipped with rigid rollover bars behind the rear seats. This gives the occupants better protection in the event of a rollover.44 BackForwards Ξ ContentsFront passenger airbagKnee airbagSide airbag (head-thorax airbag)Side airbag (head-thorax airbag)631_071Note The diagrams in the chapter "Passive occupant safety" are schematic diagrams and aid understanding.45 BackForwards Ξ ContentsSystem overviewThe system overview shows the components for all markets. Keep in mind that this constellation is not possible in volume production.631_006 46 BackForwards Ξ ContentsEquipmentEquipment specifications can vary due to the different requirements and statutory provisions for car makers in the various markets.Key to illustration on: E24 Driver side seat belt switch E25 Front passenger side seat belt switch E224 Airbag disabling switch, front passenger side G128 G179 G180 G256 G283 G284 G551 G552 G553 G554 G598 G599 G693 G851 G852 J234 J285 J533 J706 Passenger side seat occupancy sensor Side airbag crash sensor, driver side Side airbag crash sensor, front passenger side Rear side airbag crash sensor, driver side Front airbag crash sensor, driver side Front airbag crash sensor, front passenger side Belt force limiter, driver side Belt force limiter, front passenger side Seat position sensor, driver side Seat position sensor, front passenger side Pedestrian protection trigger 1 Pedestrian protection trigger 2 Pedestrian protection crash sensor, centre Driver side crash sensor for pedestrian protection 2 Passenger side crash sensor for pedestrian protection 2 Airbag control unit Control unit in dash panel insert Data bus diagnostic interface (gateway) Seat occupancy recognition control unit K19 Seat belt reminder warning lamp K75 Airbag warning lamp K145 Front passenger airbag OFF warning lamp (ON and OFF status of the front passenger airbag is indicated) N95 Driver side airbag igniter N131 Front passenger side airbag igniter 1 N132 Front passenger side airbag igniter 2 N153 Seat belt tensioner igniter 1, driver side N154 Seat belt tensioner igniter 1, front passenger side N199 Side airbag igniter, driver side N200 Side airbag igniter, front passenger side N253 Battery isolation igniter N295 Knee airbag igniter, driver side N296 Knee airbag igniter, front passenger side N490 Driver airbag relief valve igniter N491 Front passenger airbag relief valve igniter T16 16-pin connector, diagnostic portWire colours: Powertrain CAN Convenience CAN Diagnostics CAN bus Input signal Output signal47 BackForwards Ξ ContentsEngines and power transmissionEngine/gearbox combinationsThe engine-gearbox combinations shown below are those available at market launch. Engines 2.0l TFSI engine (CHHC) 169 kW 2.0l TFSI engine (CJXG) 228 kW 2.0l TDI engine (CUNA) 135 kW6-speed manual gearbox 0FB MQ350-6F6-speed manual gearbox 02Q MQ350-6F6 speed quattro manual gearbox 0FB MQ350-6A 6-speed double-clutch gearbox 0D9 DQ250-6F 6-speed quattro doubleclutch gearbox 0D9 DQ250-6A Rear axle drive 0CQ 5th generation Haldex couplingBreakdown of manufacturer codes: e.g.: MQ350-6F M D Q 350 48Manual gearbox Double-clutch gearbox Transverse mounting Rated torque capacity6 F A Number of gears Front-wheel drive quattro all-wheel drive BackForwards Ξ ContentsChassisOverview631_092The chassis of the Audi TT Roadster is based on that of the Audi TT Coupé. To meet the exacting requirements with regard to static and dynamic body rigidity, special diagonal struts have been integrated into the front and rear axles (highlighted red in diagram).In addition, the rear axle subframe is rigidly bolted to the body in front wheel drive and quattro models. For visual differentiation, the TT Roadster comes with a wider range of wheels than the TT Coupé.Diagonal struts631_091 49 BackForwards Ξ ContentsElectrical systemIntroductionThe electrical system of the TT Roadster is largely identical to that of the TT Coup