TECHNICAL DOCUMENTATION

SSP 637 Audi Q7 (type 4M) Occupant protection and infotainment

PDFEN72 pages13 MB
SSP 637 Audi Q7 (type 4M) Occupant protection and infotainment - PDF cover

This PDF is currently unavailable.

Read document text
Self Study Programme 637 For internal use onlyAudi Q7 (type 4M) Occupant protection and infotainmentAudi Service Training BackForwards Ξ ContentsOccupant safetyPassive safetyA new airbag control unit J234 was developed for occupant protection in the Audi Q7 (type 4M). It contains a sensor which measures rotation about the Z axis. In addition, the airbag control unit J234 now communicates via the FlexRay bus with other control units such as the ABS control unit J104. The ABS control unit J104 thus receives in real time data on rotation about the Z axis which is utilised by the Electronic Stability Control (ESC) system. Depending on country and trim level, pyrotechnic seat belt tensioners can be installed in the 3rd seat row of the Audi Q7 as an option.InfotainmentAudi offers various levels of the infotainment modules for the Audi Q7. MMI Radio plus is standard in Germany. This offers interfaces for external devices such as mobile phones or memory cards. The Audi sound system delivers excellent sound quality from its ten speakers. It is controlled using the MMI terminal on the center tunnel. MMI navigation plus also includes the module Audi connect, which connects the Audi Q7 to the Internet via the LTE standard. Rear passengers can surf via the WiFi hotspot with download speeds of up to 100 Mbit/s and send and receive e-mail. The driver can use the customised Audi connect services ranging from online traffic information to navigation with Google Earth and Google Street View to online media streaming.Active safetyDepending on country, 4 Audi pre sense functions are optional for the Audi Q7. In additional to Audi pre sense basic, these are: • pre sense rear • pre sense front • pre sense city Audi pre sense city is able to warn the driver about vehicles and pedestrians and brake within system limitations. Audi pre sense front brings to the Audi Q7 new functions such as evasion assist and turn assist.Audi pre sense637_097Learning objectives of this self study programme: This self study programme describes the occupant protection and infotainment systems of the Audi Q7 (type 4M). Once you have completed this self study programme you will be able to answer questions on the following topics:2• New passive safety features • New active safety features • Modifications to and new features of the infotainment system ContentsPassive safetyOverview ______________________________________________________________________________________________________________________________________________________ 4 Components __________________________________________________________________________________________________________________________________________________ 4 System overview _____________________________________________________________________________________________________________________________________________ 6 Centre crash sensor for X/Y axis G858 _____________________________________________________________________________________________________________________ 8 Airbag control unit J234 _ ____________________________________________________________________________________________________________________________________ 8 Seat belts ____________________________________________________________________________________________________________________________________________________ 12 Lap belt tensioner with buckle _ ____________________________________________________________________________________________________________________________ 16Active safetyAudi pre-sense _ ______________________________________________________________________________________________________________________________________________ 18 Pre sense basic ______________________________________________________________________________________________________________________________________________ 18 Pre sense rear _______________________________________________________________________________________________________________________________________________ 21 Pre sense front ______________________________________________________________________________________________________________________________________________ 24 Pre sense city ________________________________________________________________________________________________________________________________________________ 30 Settings and displays _______________________________________________________________________________________________________________________________________ 34InfotainmentOverview of versions ________________________________________________________________________________________________________________________________________ 44 Second-generation MIB Standard _________________________________________________________________________________________________________________________ 46 MMI radio ____________________________________________________________________________________________________________________________________________________ 47 MMI Radio plus _ _____________________________________________________________________________________________________________________________________________ 48 MMI Navigation plus _ _______________________________________________________________________________________________________________________________________ 49 Audi connect (depending on market) _____________________________________________________________________________________________________________________ 50 Control panel ________________________________________________________________________________________________________________________________________________ 51 Display mechanism _________________________________________________________________________________________________________________________________________ 54 Audi phone box ______________________________________________________________________________________________________________________________________________ 57 Network system _____________________________________________________________________________________________________________________________________________ 58 Sound systems ______________________________________________________________________________________________________________________________________________ 60 Aerials overview _____________________________________________________________________________________________________________________________________________ 66AppendixTest your knowledge ________________________________________________________________________________________________________________________________________ 69 Self study programmes _ ____________________________________________________________________________________________________________________________________ 71The self study programme teaches a basic understanding of the design and mode of operation of new models, new automotive components or new technologies. It is not a repair manual! Figures are given for explanatory purposes only and refer to the data valid at the time of preparation of the SSP. This content is not updated. For further information on maintenance and repair work, always refer to the current technical literature.NoteReference3 BackForwards Ξ ContentsPassive safetyOverviewOn the following pages you will find a summary of the occupant protection system in the Audi Q7.In-vehicle airbagsDriver airbag Front pass. airbagComponentsDepending on country version and trim level, the passive occupant and pedestrian protection system in the Audi Q7 can comprise the following components and systems: • Airbag control unit • Adaptive driver airbag • Adaptive front passenger airbag (front passenger airbag, two-stage country version) • Front side airbags • Rear side airbags (equipment option) • Head airbags • Front airbag crash sensors • Crash sensors for side impact detection in the doors • Crash sensors for side impact detection in the C posts • Crash sensor for side and longitudinal impact detection • Centre pedestrian protection crash sensor (acceleration sensor, country version) • Left and right pedestrian protection crash sensors (pressure sensors, country version) • • • • • • • • • • • • • Front side airbagFront inertia-reel seat belts with pyrotechnic belt tensioners Front inertia-reel seat belts with electrical belt tensioners Front inertia-reel seat belts with active belt force limiters Inertia-reel seat belts for second seat row with pyrotechnic belt tensioners, driver and front passenger sides (country version) Inertia-reel seat belts for third seat row with pyrotechnic belt tensioners, driver and front passenger sides (country version) Front lap belt tensioner (country version) Seat belt warning for all seats (country version) Seat occupancy sensor in front passenger seat Front pass. airbag disabling switch (country version) Front pass. airbag OFF and ON warning lamp Driver and front passenger seat position sensors Pedestrian protection trigger (country version) Battery isolator4 BackForwards Ξ ContentsFront side airbagHead airbag, driver and front passenger sideRear side airbagRear side airbag637_007Note The diagrams in the chapter "Passive occupant safety" are schematic diagrams and aid understanding.5 BackForwards Ξ ContentsSystem overviewThe system overview shows the components for all markets. Keep in mind that this constellation is not possible in volume production.637_0096 BackForwards Ξ ContentsAdditional equipmentEquipment specifications can vary due to the different requirements and statutory provisions for car makers in the various markets.Key to figure on page 6: E24 Driver side seat belt switch E25 Front pass. side seat belt switch E224 Airbag disabling switch, front passenger side F390 F391 F392 F393 F395 G128 G179 G180 G256 G257 G283 G284 G551 G552 G553 G554 G598 G599 G693 G851 G852 G858 J234 J285 J533 J706 J854 J855 Driver side seat belt switch, 2nd seat row Centre belt switch, 2nd seat row Front pass. side seat belt switch, 2nd seat row Driver side seat belt switch, 3rd seat row Front pass. side seat belt switch, 3rd seat row Passenger side seat occupancy sensor Side airbag crash sensor, driver side Side airbag crash sensor, front passenger side Rear side airbag crash sensor, driver side Rear side airbag crash sensor, passenger side Front airbag crash sensor, driver side Front airbag crash sensor, front passenger side Belt force limiter, driver side Belt force limiter, front passenger side Seat position sensor, driver side Seat position sensor, front passenger side Pedestrian protection trigger 1 Pedestrian protection trigger 2 Pedestrian protection crash sensor, centre Driver side crash sensor for pedestrian protection 2 Passenger side crash sensor for pedestrian protection 2 Centre crash sensor for X/Y axis Airbag control unit Control unit in dash panel insert Data bus diagnostic interface (gateway) Seat occupancy recognition control unit Front left seat belt tensioner control unit Front right seat belt tensioner control unit K19 Seat belt reminder warning lamp K75 Airbag warning lamp K145 Front pass. airbag OFF warning lamp (ON and OFF status of the front passenger airbag is indicated) N95 Driver side airbag igniter N131 Front pass. side airbag igniter 1 N132 Front pass. side airbag igniter 2 N153 Seat belt tensioner igniter 1, driver side N154 Seat belt tensioner igniter 1, front passenger side N196 Rear seat belt tensioner igniter, driver side N197 Rear seat belt tensioner igniter, front passenger side N199 Side airbag igniter, driver side N200 Side airbag igniter, front passenger side N201 Rear side airbag igniter, driver side N202 Rear side airbag igniter, passenger side N251 Head airbag igniter, driver side N252 Head airbag igniter, front passenger side N253 Battery isolation igniter N297 Seat belt tensioner igniter 2, driver side (lap belt tensioner) N298 Seat belt tensioner igniter 2, passenger side (lap belt tensioner) N490 Driver airbag relief valve igniter N491 Front pass. airbag relief valve igniter N668 Driver side seat belt tensioner igniter, 3rd seat row N669 Front pass. side seat belt tensioner igniter, 3rd seat row T16 16-pin connector, diagnostic port7 BackForwards Ξ ContentsCentre crash sensor for X/Y axis G858The centre crash sensor for X/Y axis G858 is an acceleration sensor. A combination sensor, the centre crash sensor for X/Y axis, measures both vehicle acceleration and deceleration in the Y and Y directions. The centre crash sensor for X/Y axis is used to validate the plausibility of defined crash situations in the longitudinal (X) and transverse directions (Y). CoordinatesXY637_010Installation location In the Audi Q7, the centre crash sensor for X/Y axis G858 is located on the centre tunnel rear in proximity to the rear cross member for the driver's seat.Centre crash sensor for X/Y axis G858637_011Airbag control unit J234Sensors and data bus interfaceThe airbag control unit J234 in the Audi Q7 has undergonme extensive modification. The sensors which measure acceleration in the X and Y directions and yaw rate about the vehicle's Z axis (inertial sensors) are now positioned directly on the airbag control unit J234. To enable the ESC signals to be transmitted on the data bus with guaranteed minimum reaction time of about 2 ms, the control unit was rerouted from the powertrain CAN bus to the FlexRay bus. In functional terms, therefore, the airbag control unit J234 records body movement and provides this data via the FlexRay bus to ABS control unit J104, among others. The ABS control unit J104 is also connected to the FlexRay bus. The ABS control unit processes the data it receives from the airbag control unit and takes the appropriate action, e.g. stabilision of vehicle by corrective braking (ESC control).637_050Airbag control unit J2348 BackForwards Ξ ContentsMeasurement of longitudinal vehicle movement in X, Y and Z directionsThe sensors for the measurement of longitudinal vehicle movement in X, Y and Z directions work on the "seismic mass" principle. CoordinatesZXY637_013Design of the sensorA movably mounted mass (seismic mass) is integrated in the sensor at a defined distance to a stationary capacitor plate acting as an electrode. The seismic mass also has electrodes, which combine with the stationary electrodes to form a capacitor. An acceleration force acting on the sensor changes the position of the seismic mass relative to the stationary capacitor plate due to inertia. This, in turn, changes the physical magnitude of the capacitance, which is processed digitally and evaluated accordingly.Rest positionMovementDirection of measurementSpring element Capacitor plate (movably mounted)Capacitor plate (stationary)Seismic massHousing637_014637_0159 BackForwards Ξ ContentsMeasurement of vehicle rotation about the X and Z axesThe sensors for the measurement of vehicle rotation about the X and Z axes work on the "Coriolis force" principle. CoordinatesZX637_088The Coriolis force acts on all bodies that move within a rotating reference system. The effect of the Coriolis force is demonstrated in the example given here. A ball is rolled on a disc. When the disc is stationary the ball rolls straight across it.637_016aWhen the disc rotates while the ball is rolling on the platform, however, the ball is deflected in the direction of motion of the disc. The degree of deflection depends on the rotational speed of the disc.637_016bPut in simple terms, therefore, the sensor consists of a micromechanical body which is permanently subjected to oscillation excitation. When the vehicle turns, the direction of movement of the oscillating body changes. These deflections relative to the direction of movement (changes in movement) are processed digitially and evaluated accordingly. To measure rotation about the X and Z axes, a rollover sensor (for rollover detection) and an inertial sensor (for ESC signal indicating yaw rate about Z) are arranged at a 90° offset relative to each other in the airbag control unit J234.Airbag control unit J234637_01210 BackForwards Ξ ContentsActivation of the electrically reversible seat belt tensionersIf corrective adjustments are made by Audi pre sense, the airbag control unit J234 initiates tensioning of the electrically reversible seat belt tensioners via the front left seat belt tensioner control unit J854 and the front right seat belt tensioner control unit J855. Seat belt tensioners J854 and J855 are connected to the airbag control unit via a sub-bus system. Refer to page 18 for further information about Audi pre sense and to page 12 for further information about the reversible seat belt tensioners. Extract from the topologyData bus diagnostic interface J533FlexRay Airbag control unit J234 Sub-bus Control unit for front left seat belt tensioner J854LIN bus Seat occupancy recognition control unit J706 Control unit for front right seat belt tensioner J855637_008Terminal 30The airbag control unit J234 is a terminal 30 control unit and is discretely connected to terminal 30 and terminal 15. It additionally receives digital information on the status of terminal 15 via the data bus diagnostic interface J533 (gateway). The airbag system is only deploys when the ignition is on (terminal 15 on). A capacitor is integrated in the control unit J234. If terminals 15 and 30 are disconnected, this capacitor enables the different pyrotechnic components (e.g. airbags, seat belt tensioners) to deploy. If only terminal 15 is disconnected, the control unit is still supplied by terminal 30 (continuous pulse). This allows the various pyrotechnic components to be initiated by the vehicle battery, making even longer deployment times possible.FlexRayFunction diagramKey: A J234 J367 J519 J533 Battery Airbag control unit Battery monitor control unit Onboard power supply control unit Data bus diagnostic interfaceLIN bus 637_018DiagnosticsThe diagnostic address of the airbag control unit J234 is "15 – Airbag". The generation of control units (system designation) is "Airbag10.44" and can be retrieved in the Guided Fault Finding under "Control unit identification". Since the installed position of the airbag control unit J234 can have tolerances, the inertial sensors can be calibrated in order to measure acceleration in the X and Y directions and the yaw rate about the Z axis. If a new airbag control unit J234 has been installed but the basic setting procedure has not yet been carried out, the event "C115E54 - inertial sensors - no basic setting" is entered into the fault memory. During subsequent work basic setting of the inertial sensors of airbag control unit J234 must be carried out using the Guided Fault Finding function. • If control unit J234 was removed and installed. • If control unit J234 is replaced.11 BackForwards Ξ ContentsSeat beltsFront automatic belt retractorDepending on country version and trim level, 2 different automatic belt retractors are used on the Audi Q7. • Automatic belt retractor with seat belt tensioner and active belt force limiter • Automatic belt retractor with belt tensioner, reversible seat belt tensioner and active belt force limiterReversible belt tensioner with electric motorIf the vehicle is equipped with Audi pre sense basic, the front automatic belt retractors are equipped with pyrotechnic belt tensioners, with active belt force limiters and with reversible seat belt tensioners with electric motors. The reversible seat belt tensioners, front left seat belt tensioner control unit J854 and front right seat belt tensioner control units J855 are connected to the airbag control unit J234 via a sub-bus system. Seat belt tensioner control units J854 and J855 are purely actuators. They have no "intelligence" and are activated by the airbag control unit. When Audi pre sense basic detects specific driving situations, corresponding signals are sent to the data bus. The airbag control unit evaluates the signals and, if necessary, instructs the seat belt tensioner control unit to partially or fully tension the seat belts via an electric motor. For further information about Audi pre sense, refer to the chapter "Active safety" on page 18. The automatic seat belt retractors use pyrotechnic ball tensioners. If an automatic seat belt retractor with reversible seat belt tensioner is replaced, it is not necessary to carry out basic setting using the Guided Fault Finding system.637_085Pyrotechnic seat belt tensionerActive belt force limiterOuter automatic seat belt retractors of the 2nd and 3rd seat rowsDepending on country version and trim, the automatic seat belt retractors of the 2nd and 3rd seat rows are equipped with pyrotechnic belt tensioners. The automatic seat belt retractors use pyrotechnic push rod tensioners.Automatic seat belt retractor 3rd seat rowAutomatic seat belt retractor 2nd seat row637_087 12 BackForwards Ξ ContentsPush rod tensionerDesignPlugged electrical connection (1) with: • igniter • pyrotechnic propellant charge Piston (2) with: • seal • stopper • spacer Guide tube/pressure chamber (3)Braking wedge (4)5-piece flexible push rod made of plastic "Snake" (5)Belt retractor shaft as torsion bar spring (6) Gear (7)Guide (8)637_098The guide tube/pressure chamber (3), refer to Fig. 637_098, accomodates the following: • Plugged electrical connection with igniter and pyrotechnic propellant charge (1) • 5-piece flexible push rod "Snake" (5) and "Snake" guide • Pressure chamber (3) • Braking wedge (4) • Piston (2) (including seal, stopper and spacer)Piston (2) and push rod "Snake" (5)Piston (2) with: • seal • stopper • spacer4 short parts of the "Snake"Main part of the "Snake"637_10013 BackFunction When the airbag control unit J234 ignites the pyrotechnic propellant charge (1) of the push rod tensioner, the combustion of the propellant charge leads to a sudden rise in pressure inside the guide tube/pressure chamber (3). Due to the pressure rise, the piston (2) and the "Snake" (5) are pushed down.Forwards Ξ ContentsPyrotechnic propellant charge (1)Piston (2)Guide tube/pressure chamber (3)"Snake" (5)637_101After the "Snake" (5) has moved out of the guide tube, it meets the gear (7) which is firmly connected to the retractor shaft (6). The teeth of the gear mesh with the "Snake" due to the material characteristics and geometry of the components. The "Snake" is pushed further down and causes the gear together with the retractor shaft to rotate."Snake" (5)Gear (7)Retractor shaft (6)637_10214 BackForwards Ξ ContentsAs the seat belt is firmly connected to the belt retractor shaft (6), the seat belt is retracted and tensioned. To esnure that the belt force exerted on the occupants stays within a defined range, the belt force is limited. The belt force is limited by the retractor shaft (6), which is configured as a torsion bar spring. The "Snake" (5) is moved to the side by the guide (8) in a controlled manner. The distance which the piston (2) travels is limited by the stopper which moves up against the braking wedge (4).Piston (2)Braking wedge (4) "Snake" (5)Retractor shaft (6) Guide (8)637_103When the stopper (2) has reached the end of its travel envelope, the long part of the "Snake" (5) protrudes a defined distance from the guide tube/pressure chamber (3). At this point, 4 short parts of the "Snake" come into contact with the gear (7). Due to the 5-piece design of the "Snake", the 4 short parts displace and push the "Snake" in such a way that the gear and the retractor shaft (6) are again free. The belt tensioning process is now complete.Piston with stopper (2)Guide tube/pressure chamber (3)"Snake" (5) Retractor shaft (6) Gear (7)637_10415 BackForwards Ξ ContentsLap belt tensioner with buckleDepending on country version, the Audi Q7 is equipped with lap belt tensioners, igniter for seat belt tensioner 2 driver side N297 and igniter for seat belt tensioner 2 front passenger side N298 on the driver and front passenger sides. If lap belt tensioners are fitted, the seat belt of the automatic belt retractor also comes fitted with a buckle. When the seat belt is being worn, the lap belt tensioner in combination with the buckle performs the following tasks in the event of an accident which meets the criteria for deployment: • Separation of the force acting on the pelvis from the force acting on the thorax • Reduced chest compression • Reduced upper thigh load • Reduced forward displacement of the pelvis • Improved interfacing between the pelvis and seat OverviewBuckleLap belt tensionerAutomatic belt retractor CouplingBelt deflector637_044Accident response sequenceIn the event of an accident which meets the criteria for deployment, the airbag control unit deploys the seat belt tensioners and the lap belt tensioners. The seat belt is tensioned from the buckle on up by the belt tensioner on the automatic belt retractor. For safety reasons, the belt force is limited by the active belt force limiter. The lap belt tensioner tensions the part of the seat belt between the occupant's pelvis and the buckle.Seat belt travel637_045 16 BackForwards Ξ ContentsInstallation location of the lap belt tensionerThe lap belt tensioner is installed in the B post. For this purpose, the lugs on the lap belt tensioner are integrated in the B post and bolted into place.Coupling The seat belt is deflected in the area of the B post and, unlike in other vehicles without lap belt tensioners, is able to move upwards. A coupling is stitched to the end of the seat belt. The lap belt tensioner coupling is inserted into the seat belt coupling and clipped into place. To insulate against noise, a foam pad is fitted in the coupling area.Lug engaged in the B postLap belt tensioner On L/H side of the vehicleLap belt tensionerSteel cable of the lap belt tensionerCoupling Foam pad Seat belt join Belt deflector637_046 637_047Diagnostics The lap belt tensioner is a pyrotechnic component. The safety instructions are the same as for other pyrotechnic components. Refer to the relevant service literature. The lap belt tensioner is damaged when ignited and has to be replaced as a unit. The airbag control unit J234 continuously monitors the lap belt tensioners for proper functioning. Faults in the system are registered by the airbag control unit as event memory entries. These faults can be cleared using the "Guided Fault Finding".BuckleThe difference between this seat belt buckle and a "regular" seat belt buckle is that it locks the belt in the event of an accident which matches the criteria for deployment. The result is a load path for the thorax region and a load path for the pelvic region, with all the aforementioned benefits for the occupants.637_048Reference For further information about the function of the lap belt tensioner with buckle, refer to Self Study Programme 625 "Audi A3 saloon".17 BackForwards Ξ ContentsActive safetyAudi pre-senseAudi pre sense is, within its system parameters, able to initiate actions to protect the occupants and other road users in certain critical situations. For this purpose, the vehicle and its occupants are prepared for a potentially imminent collision. This is made possible by networking the various in-car systems. The systems send data continuously to the data bus. Other control units are able to evaluate this information and take appropriate action. Audi pre sense is available in the following versions for the Audi Q7. Depending on market, Audi pre sense basic/rear and Audi pre sense city may be standard equipment. If this is not the case, Audi pre sense basic, pre sense city, pre sense rear and pre sense front are optional. Please note that Audi pre sense cannot prevent collisions. It serves only to assist the driver and it can reduce the severity of the collision. It should also be noted that not all objects or lane makings can be detected by the sensor or by the camera. The individual functions of Audi pre sense are described in greater detail below.Audi pre-sense basic Audi pre sense city Audi pre-sense front Audi pre sense rear inclusive of pre sense basicPR no. 7W1 PR no. 6K8 PR no. 8T3 / 8T8 PR no. 7W3Pre sense basicWith Audi pre sense basic, the following actions can be initiated: • Belt slack reduction • Partial or full tensioning of the electrically reversible seat belt tensioners • Closing the panoramic glass sunroof2) • Closing the side windows • Switching on the hazard warning flashers1)Definition and function of belt slack reduction system for reversible seat belt tensioners In certain situations, e.g. when wearing a thick winter jacket, it may be the case that the seat belt is not tight fitting to the body after the reversible seat belt tensioners deploy. In such a case, the mechanical unreeling force of the automatic seat belt retractor is less than the force required to compress the thick winter jacket. The distance which the seat belt can travel until it fits the front occupants perfectly is referred to as "belt slack". The seat belt is unreeled with defined force by the reversible seat belt tensioners under the following conditions. This enables any existing belt slack to be reduced. • If the vehicle reaches a speed of about 15 kph after starting the engine and travelling forwards. • If the vehicle has not reached a speed of 15 kph about 10 seconds after starting the engine and travelling forwards.Seat belt fits rightly (minimum belt slack)Seat belt on "thick" clothing (more belt slack)637_004637_005Not available in all countries. 2) Optional equipment.1)18 BackSystem characteristics of the reversible seat belt tensioners • After reducing seat belt slack, the seat belt is released again. • If a seat belt is not worn, slack is not reduced for this seat belt. • If thr front passenger airbag is "off", slack is not reduced on the front passenger side.Forwards Ξ Contents• The reversible seat belt tensioners, front left seat belt tensioner control unit J854 and front right seat belt tensioner control units J855 are connected to the airbag control unit J234 via a sub-bus system. The airbag control unit J234 instructs the seat belt tensioners to reduce the belt slack. • In the case of Audi pre sense basic, tensioning of the reversible seat belt tensioners can take place at a speed of higher than 30 kph when the longitudinal and transverse dynamics functions are active. To activate longitudinal dynamics, the vehicle must be moving forwards. An exception here is the crash function in the low relative speed range (refer to page 20).Longitudinal dynamics function Hazard braking If the brake pressure reaches a defined value during a hazard braking manoeuvre, Audi pre sense basic initiates electrical partial tensioning of the reversible seat belt tensioners. A message indicating that Audi pre sense is active appears in the instrument cluster. No audible signal is given.Audi pre senseEmergency braking During an emergency braking manoeuvre, the seat belt tensioners are either partially or fully tensioned. Depending on the situation, the ABS control unit J104 can instruct the hazard warning flashers1) to be activated. A distinction is made between the following two criteria for emergency braking. • An emergency braking situation exists if the ABS control unit J104 detects that brake pressure had reached a specific value within a defined period of time. If the conditions are met, Audi pre sense basic initiates electrical full tensioning of the reversible seat belt tensioners. A message indicating that Audi pre sense is active appears in the instrument cluster. No audible signal is given.637_041• An emergency braking situation exists if the given conditions are not met, but if the ABS control unit J104 has detected an emergency braking manoeuvre based on the pedal rates. If the conditions are met, Audi pre sense basic initiates electrical partial tensioning of the reversible seat belt tensioners. A message indicating that Audi pre sense is active appears in the instrument cluster. No audible signal is given.System characteristics • If Electronic Stability Control (ESC) is set to "lift / offroad" of "off" using the TCS/ESP button E256, the seat belts are not partially tensioned. • If Audi drive select is set to "dynamic" or "lift / offroad", the seat belts are not partially tensioned. • If Audi pre sense is switched off in the MMI, the seat belts are not partially tensioned either.Operating unit 1 for drive and comfort/ convenience functions E791 Drive profile selection switch module E592 TCS/ESP button E2561)Not available in all countries.637_019 19 BackTransverse dynamics function If the vehicle oversteers or understeers, the Electronic Stability Control (ESC) will try to stabilise the vehicle. If the vehicle becomes unstable because certain physical limits have been exceeded, the airbag control unit J234 initiates partial tensioning of the electrically reversible seat belt tensioners. A message indicating that Audi pre sense is active appears in the instrument cluster. No audible signal is given. If the vehicle can no longer be stabilised, the following actions are initiated: • The electrically reversible seat belt tensioners are fully tensioned. A message indicating that Audi pre sense is active appears in the instrument cluster. No audible signal is given. • The side windows and the panoramic glass sunroof2) are closed when the seat belts are fully and partially tensioned. • When the seat belts are fully and partially tensioned, the hazard warning flashers1) are activated as long as the vehicle is unstable.Forwards Ξ ContentsAudi pre sense637_041System characteristics • If Audi drive select is set to "dynamic" or "lift / offroad", the seat belts are not partially tensioned. • If Audi pre sense is switched off in the MMI, the seat belts are not partially tensioned either. • If the vehicle is unstable, if the Electronic Stability Control is set to "lift / offroad" or "off" and if the driver actively applies the brakes, the seat belts are fully tensioned. A message indicating that Audi pre sense is active appears in the instrument cluster. No audible signal is given. The side windows and the panoramic glass sunroof2) are closed. The hazard warning flashers1) are activated as long as the vehicle is unstable.Crash function in the low relative speed range If the airbag control unit J234 detects a head-on collision at a low relative speed3) and at a low rate of vehicle deceleration, the airbag control unit decides situation-specifically on the basis of the control unit algorithm whether to initiate electrical full tensioning. If the above-mentioned conditions apply, pyrotechnic components such as the airbags do not deploy. No further actions are initiated, e.g. activation of the hazard warning flashers1), closing of the side windows or the panoramic glass sunroof2).Not available in all countries. Optional equipment. 3) The relative speed is the difference in speed between one's own vehicle and the following vehicle.1) 2)20 BackForwards Ξ ContentsPre sense rearWith Audi pre sense rear, the following actions can be initiated: • RECAS warning (Rear End Collision Avoidance System)1). • Inflation of the side bolsters in the seats and seat backs2). • Closing the panoramic glass sunroof2). • Closing of the side windows • Speed-dependent partial or full tensioning of the electrically reversible seat belt tensioners. Audi pre sense basic is always fitted in combination with Audi pre sense rear. Audi pre sense rear is only possible if the vehicle has Audi side assist. Audi side assist 2 "mid-range" radar sensors which are able to detect objects within a range of approximately 0 – 70 m behind the vehicle. A vehicle with Audi pre sense rear is equipped with Audi side assist control unit J769 and Audi side assist control unit 2 J770. The Audi side assist control unit 2 J770 is connected to the Audi side assist control unit J769 (master control unit) via a sub-bus system. In addition, it is connected to the Extended CAN bus. Each control unit is combined with a radar sensor to form a unit. Installation location The master control unit for Audi side assist J769 is installed in the rear bumper on the right-hand side of the vehicle. The Audi side assist control unit 2 J770 is installed in the rear bumper on the left-hand side of the vehicle.Audi side assist control unit 2 J770Audi side assist control unit J769 (master control unit)637_021Function The radar sensors continuously monitor the traffic following the vehicle whenever Audi side assist is inactive. Control units J769 and J770 evaluate and condition the signals they receive and thereby determine the distance to following vehicles within their detection range. Based on the information supplied by the ABS control unit J104, the vehicle knows its own speed. The Audi side assist control unit 2 J770 and the Audi side assist control unit J769 compute the speeds of the following vehicles based on this information. The following information is therefore available to Audi pre sense rear3): • Distance to following vehicles. • Speed of following vehicles. • Speed of own vehicle. If an Audi side assist control unit detects a critical pre sense rear situation, the Audi side assist control unit J769 sends various items of information to the data bus diagnostic interface J533 (gateway). A critical situation is defined as a situation in which a following vehicle would collide with the rear end of one's own vehicle unless further action is taken by the driver of the following vehicle. The data bus diagnostic interface J533 forwards these signals to the airbag control unit J234. This control unit decides on the basis of available information which actuators to activate and distributes this information to different control units, such as the sliding sunroof control unit J2452).Not available in all countries. Optional equipment. 3) A precondition is that the following vehicles are within the detection range of the radar sensors.1) 2)21 BackAudi pre sense rear now initiates the following actions, which can be subdivided into two phases. Phase 1 1. Initially, the indicators flash rapidly for about 3 seconds1). This flashing cycle is known as the RECAS warning, RECAS being the abbreviation for Rear End Collision Avoidance System. Due to the high frequency at which the indicators are activated, humans see these signals as flashes of light. The flashing of the indicators alerts the drivers in following vehicles to a critical situation ahead and animates them to take appropriate action, e.g. initiate braking. The time of activation of the RECAS warning depends on the severity of the critical situation and the relative speed3) of the following vehicles. The onboard power supply control unit J519 activates the RECAS warning. If the driver in the following vehicle reacts during this phase, e.g. brakes or takes evasive action, and Audi lane assist control units J769 and J770 no longer detect a critical situation, then no further action, e.g. closing of the side windows, is taken.RECAS warningForwards Ξ Contents637_020Phase 2 1. If the critical situation still exists, the side windows and the panoramic glass sunroof2) are closed. If the vehicle is equipped with pneumatic front sport seats2) or with individual contour seats2) (PR no. Q1J or Q2J), the side bolsters of the seat bases and seat backs are inflated on the driver and front passenger seats.637_1052. Approximately 1 second after activating the side windows, the panoramic glass sunroof2) and inflation of the side bolsters2) (the seat bases and seat backs), the instrument cluster indicates that Audi pre sense is active.Audi pre sense637_041Not available in all countries. 2) Optional equipment. 3) The relative speed is the difference in speed between one's own vehicle and the following vehicle.1)22 Back3. If the vehicle is drawing closer and the danger of a rear end impact continues to increase, the front seat belts are electrically tensioned to the extent necessitated by the situation. If one's own vehicle speed exceeds a pre-defined value, the seat belts are not tensioned.Forwards Ξ ContentsThe airbag control unit J243 activates tensioning of the seat belts via the front left seat belt tensioner control unit J854 and the front right seat belt tensioner control unit J855, which are connected to the airbag control unit J234 via a sub-bus system.FlowchartRECAS warningClosing of the side windows and the panoramic glass sunroof. Inflation of the side bolsters of the seat backs and the front seatsTensioning of the electrically reversible seat belt tensionersCollisionVisual driving warning637_002Towing mode If a trailer is detected coupled to the vehicle via a factory fitted tow bar, Audi pre sense rear is not active. If a trailer is detected, the engine is running and the vehicle has reached a speed of about 5 kph, the 1st display appears in the instrument cluster. If pre sense city is also installed, the 1st display is followed by the 2nd.1st display2nd displayAudi pre sense: currently restricted. Towing modeEmergency braking system switched off637_042637_031Note The driver information display in Fig. 637_031 is expected to change at a later point in time in the instrument cluster.Reference For further information, please refer to the handbook. For more information about the ACC, refer to self Study Programme 633 "Audi Q7 (type 4M) Chassis". For further information about the front camera for driver assistance systems, please refer to Self Study Programme 635 "Audi Q7 (type 4M)".23 BackForwards Ξ ContentsPre sense frontWith Audi pre sense front, the following actions can be initiated: • • • • • • • • • • Audible and visual early warnings Acute warning by brake jerk Pre-charging of the brake system Adaptation of hydraulic brake assist Partial braking operations I and II1) Target braking1) Automatic emergency braking1) Turn assist1) Evasion assist Switching on the hazard warning flashers1) ACC unitIf the vehicle is equipped with Audi pre sense front, it also has the following equipment and auxiliary functions. • ACC (Adaptive Cruise Control) • Front camera for driver assistance systems ACC uses two "long-range" radar sensors which have the capacity to detect objects within a range of up to 250 m in front of the vehicle. For this purpose, the vehicle is equipped with two radar sensors and two accompanying control units. Each radar sensor combines with a control unit to form an ACC unit.637_024ACC units The ACC unit is installed in the front bumper on the right-hand side of the vehicle, together with the right adaptive cruise control sender G259 and the ACC control unit J428. The ACC unit is installed in the front bumper on the left-hand side of the vehicle together with the left adaptive cruise control sender G258 and the ACC control unit 2 J850. The ACC unit on the left driver's side acts as a master control unit. The ACC unit on the right-hand side of the vehicle is connected to the master control unit via a sub-bus system.Front camera for driver assistance systems R242ACC unit with: • Left adaptive cruise control sender G258 • Control unit 2 for adaptive cruise control J850ACC unit with: • Right adaptive cruise control sender G259 • ACC control unit J4281)Not available in all countries.637_02324 BackFunction The radar sensors continuously scan the area ahead of one's own vehicle. Audi pre sense front is active even if the ACC system is not active. The ACC control unit J428 and ACC control unit 2 J850 evaluate and conditions the signals and determine from this data the distance to vehicles within the detection range in front of the vehicle.Forwards Ξ ContentsBased on the information supplied by the ABS control unit J104, the vehicle knows its own speed. On the basis of this information, the ACC control unit J428 and ACC control unit 2 J850 compute the speeds of the vehicles ahead. The following information is therefore known to Audi pre sense front1): • Distance to vehicles ahead. • Speed of vehicles ahead. • Speed of own vehicle.Information processing The master control unit (ACC control unit J428) evaluates the information and transmits corresponding signals on the data bus. Other bus users receive the signals and are able to take appropriate action. In addition, Audi pre sense front utilises the information provided by front camera for driver assistance systems R242 (refer to Fig. 637_023 on page 24). The classes and widths of the vehicles ahead can be determined more accurately using the additional information provided by the front camera. Audi pre sense front only utilises the information provided by the front camera if the light and visibility conditions are good enough. This means that in poor visibility conditions such as darkness or fog, where the front camera cannot provide reliable image data, only the data generated by the radar sensors is used for Audi pre sense front functions. Audi pre sense front reacts only to vehicles which are travelling in the same direction and to vehicles which have stopped or are stationary. Turn assist is an exception here. If turn assist is available, the system also reacts to oncoming traffic.FunctionsAudi pre sense front has the following functions: A In the event of an impending collision, the driver is warned and assistance is provided by automatic braking1) or by boosting1) the braking pressure applied by the driver thereby gaining additional reaction time and reducing the vehicle's speed. Turn assist - response to oncoming traffic Evasion assist - response to moving, stopped or stationary vehiclesB C1)A precondition is that the following vehicles are within the detection range of the radar sensors.25 BackFunction A When the vehicles approaches another vehicle which is moving much more slowly or is stationary, the control unit in the dash panel insert J285 issues visual and audible warnings to the driver if certain pre-defined limits are exceeded. These warnings are given within a certain time frame ahead of the last braking opportunity for braking or collision avoidance before the actual collision occurs. The timing of warnings depends on the driver's degree of activity. Depending on steering, pedal and turn signal inputs, the system classifies the driver as active or inactive and, consequently, as attentive or inattentive. If the driver is classed as attentive, the warning will be issued later than a warning for a driver classed as inattentive. At the same time, the ABS control unit J104 prefills the brake system and changes the deployment algorithms for hydraulic brake assist. This means that hydraulic brake assist starts to build up brake pressure even at low brake pedal actuation speeds. If the driver does not respond to the warnings or, for example, eases off the accelerator, the ABS control unit J104 produces a warning jerk. The warning jerk is a very brief but easily noticeable braking impulse and does not serve to reduce speed. It alerts the driver to the traffic situation and indicates to the driver that he must react immediately in order to prevent an impending collision. Depending on how attentive the driver is considered to be, the warning jerk will be produced within a certain time window ahead of the last opportunity to brake or take evasive action to avoid a collision. If the driver still fails to react or only eases his foot off the accelerator, the system will initiate partial braking operation I1), which involves applying up to 35 % of maximum brake force. If the front camera for driver assistance systems R242 has also detected the obstacle, partial braking operation II1) is initiated by applying up to 60 % of maximum brake force.Forwards Ξ ContentsAudi pre sense637_041If the driver applies the brakes, a target braking maneouvre may be performed in all of the phases described above (pre-charging of the brake system, reconfiguration of hydraulic brake assist, driver warning, warning jerk, partial braking operations I and II) 1). During the target braking manoeuvre, Audi pre sense front computes whether the driver is applying enough brake force to be able to avoid a collision. If this is not the case, the required brake pressure is increased depending on the situation. If Audi pre sense front detects that an accident is likely to be unavoidable, the ABS control unit J104 can initiate automatic emergency braking1). Emergency braking can be performed immediately up to a defined maximum speed or after partial braking operation II. If the vehicle has automatically brought the vehicle to a halt without driver input, further audible signals will sound. These signals alert the driver to the fact that he/she must actively take control of the vehicle (e.g. by braking).FlowchartPrecharging of the braking system, hydraulic brake assist reacts more sensitively Audible and visual driver warnings (rear collision warning)Warning jerkPartial braking operation I or partial braking operation II (if the front camera has confirmed presence of a vehicle)Emergency braking (if collision is probably unavoidable).CollisionTarget braking637_0011)Not available in all countries.26 BackFunction B In the Audi Q7 Audi pre sense front has been to upgraded include turn assist. In the following example it is assumed that the traffic situation involves vehicles driving right-hand side of the road.Forwards Ξ ContentsIn a driving situation involving vehicles driving left-hand side of the road turn assist helps to driver to turn right.Turning assist637_106The driver of vehicle (E) wants to turn right and indicates by actuating the left indicator. Vehicle (E) is travelling slower than 10 kph. As mentioned initially, Audi pre sense front continuously monitors the traffic ahead of the vehicle with the aid of ACC and the front camera. As a result, Audi pre sense front knows that another vehicle (A) is approaching in the oncoming direction. Audi pre sense front also knows that the driver is planning to turn left (from the actuation of the indicator).If Audi pre sense detects that a critical situation would occur due to the current turning manoeuvre, hydraulic brake assist is reconfigured for the ABS control unit J104. In addition, the deployment algorithms for hydraulic brake assist are adjusted. This action ensures the rapid response of the brake during a braking manoeuvre. If the driver of vehicle (E) were now to continue the turning manoeuvre and move off, Audi pre sense front would detect this based on the information provided by the speed sensors of ABS control unit J104.In this case, Audi pre sense front would automatically initiate emergency braking by the ABS control unit J104 with the result that vehicle (E) is brought to a halt in its own lane. The driver is alerted visually and audibly to the fact that the vehicle is braking automatically1). If the vehicle has automatically brought the vehicle to a halt without driver input, further audible signals will sound. These signals alert the driver to the fact that he/she must actively take control of the vehicle (e.g. by braking).Audi pre sense637_041System characteristics of the turn assist function • Turn assist is available only at speeds below 10 kph. • The indicators must be activated. • In the case of right-hand-drive vehicles, the system only works when turning left. • In the case of left-hand-drive vehicles, the system only works when turning right. • This is indicated audibly and visually.Deactivating turn assist If Audi pre sense is switched off in the MMI, turning assist is not available. The system can be reactivated in the MMI. Depending on country version 1), a deactivated Audi pre sense system (and thus turn assist) is automatically re-activated when the ignition is turned off and on again.1)Not available in all countries.27 BackFunction C In the Audi Q7 Audi pre sense front has been to upgraded include evasion assist.Forwards Ξ ContentsEvasion assistPre-charging of the brake system Hydraulic brake assists reacts with heightened sensitivityWarning jerkAudible and visual driver warnings (early warning)637_107In the following example vehicle (E) is approaching another vehicle (A). Audi pre sense front has detected a critical situation based on the information provided by the ACC sensors or the front camera. The following action was taken by Audi pre sense front: • Audible and visual early warnings • Pre-charging of the brake system • Adaptation of hydraulic brake assist and the acute warning (warning jerk), refer to function A on page 26.If the driver (E) takes action to evade vehicle (A) after the acute warning (brake jerk) has been given, evasion assist provides assistance if needed by producing additional steering torque. Audi pre sense front computes a suitable evasion line based on various items of information, such as one's own speed and the lane in which the vehicle ahead in driving. If vehicle (E) deviates too far from the evasion line, but is still within certain bounds, evasion assist will try to guide the vehicle along the evasion line by providing steering assistance. The aim is to help the driver steer past the obstacle. This can help to prevent loss of vehicle control while taking evasion action, provided this is within the physical limitations of the system.28 BackSystem characteristics of the evasion assist function • Evasion essist does not provide steering assistance unless the driver is actively steering the vehicle • Evasion assist is available at speeds of between about 30 and 150 kph • and helps the driver to steer around an obstacle on the left or right. Deactivating evasion assistForwards Ξ ContentsIf Audi pre sense is switched off in the MMI, evasion assist is not available. The system can be reactivated in the MMI. Depending on country version1), a deactivated Audi pre sense system (and thus evasion assist) is automatically re-activated when the ignition is turned off and on again.Other functions If the vehicle is also equipped pre sense basic or pre sense rear in addition to Audi pre sense front, the following action can also be taken in critical situations: • Closing the side windows • Closing the panoramic glass sunroof2) • Inflation of the side bolsters in the seats and seat backs2). • Tensioning of the electrically reversible seat belt tensionersDriver prioritisation over system If the driver takes clear evasive action, accelerates or brakes during the individual phases of Audi pre sense front functions, the momentary actions of Audi pre sense front (e.g. partial braking operation I) will be suppressed or cancelled. Evasion assist is an exception here. If the driver takes clear evasive action after a warning jerk, the evasion assist can guide the driver along the computed evasion line by providing helpful steering inputs. In this case, the assistance is not cancelled by a clear evasive action.Effect of system settings on Audi pre sense front functions • If Audi pre sense is deactivated, the functions of Audi pre sense front are also deactivated. • If ESC is set to "offroad" or "off", certain functions of Audi pre sense front are deactivated. • If downhill assist is activated, certain functions of Audi pre sense front are deactivated.1) 2)Not available in all countries. Optional equipment.29 BackForwards Ξ ContentsPre sense cityWith Audi pre sense city, the following actions can be initiated: • • • • Audible and visual early warnings Acute warning by brake jerk Pre-charging of the brake system Reconfiguration (alteration of the parameters) of hydraulic brake assist • Automatic braking up to emergency braking intensity • Activation of the hazard warning flashers (emergency braking warning)1)Response to vehiclesResponse to pedestrians637_025637_026Audi pre sense city is a "camera based" system. To use Audi pre sense city, therefore, the front camera for driver assistance systems R242 must be fitted. The front camera continuously monitors the traffic ahead of the vehicle. Among other things, it makes allowance for the distance to and speed of other objects relative to one's own vehicle.Depending on the severity of the critical driving situations, Audi pre sense city can warn the driver first and then, if necessary, initiate braking. The system can, under certain conditions, detect the following scenarios: • Vehicle ahead • Pedestrians standing in the same lane or approaching the same lane as the vehicleResponse to vehiclesThe following preconditions must be met in order to activate the system: • pre sense city can respond to vehicles which are travelling in the same direction and which have stopped or are stationary • pre sense city does not respond to crossing or oncoming traffic • pre sense city is active upwards of a speed of about 10 kph • pre sense city can warn against vehicles up to a speed of 250 kph • pre sense city can initiate braking up to a speed of 85 kphCollision warning phase If the vehicle approaches another vehicle which is travelling in the same direction or has stopped or is stationary at a speed of of up 250 kph, resulting in a critical driving situation, the instrument cluster gives the driver audible and visual early warnings when set limits are exceeded.Audi pre sense1)Not available in all countries.637_04130 BackWarnings against a possible collision These warnings are given within a certain time frame ahead of the last braking opportunity for braking or collision avoidance before the actual collision occurs. The timing of warnings depends on the driver's degree of activity. Depending on steering, pedal and turn signal inputs, the system classifies the driver as active or inactive and, consequently, as attentive or inattentive. If the driver is classed as attentive, the warning will be issued later than a warning for a driver classed as inattentive. At the same time, the ABS control unit J104 prefills the brake system and modifies the deployment algorithms for hydraulic brake assist. This means that hydraulic brake assist starts to build up brake pressure even at low brake pedal actuation speeds.Forwards Ξ ContentsIf driver does not respond to the warnings, however, the ABS control unit J104 generates an acute warning by jerking the brakes. The warning jerk is a very brief but easily noticeable braking impulse which does not serve to slow the vehicle down. It alerts the driver to the traffic situation and indicates to the driver that he must react immediately in order to prevent an impending collision. Depending on how attentive the driver is considered to be, the warning jerk will be produced within a certain time window ahead of the last opportunity to brake or take evasive action to avoid a collision.Braking intervention phase If the driver does not respond to the warning jerk, the ABS control unit J104 will automatically initiate braking. If the vehicle automatically comes to a halt without driver input, further audible signals will sound. These signals alert the driver to the fact that he must actively take control of the vehicle (e.g. by applying braking). If the driver fails to take control of the vehicle, e.g. in a model with automatic transmission, the system will release the brake and the vehicle will start to move.FlowchartPrecharging of the braking system, hydraulic brake assist reacts more sensitively Audible and visual driver warnings (early warning)Warning jerkEmergency or full brakingCollisionResponse to pedestriansThe following preconditions must be met in order to activate the system: • pre sense city responds to pedestrians who are standing in the same lane as the vehicle or moving towards same lane as the vehicle • pre sense city is active upwards of a speed of about 10 kph637_001• pre sense city can warn against pedestrians up to a speed of 85 kph • pre sense city can initiate braking up to a speed of 85 kphCollision warning phase If the vehicle is travelling at a speed of about 10 kph and a pedestrian crosses the lane in front of the vehicle or is standing in the same lane as the vehicle creating a critical driving situation, the instrument cluster issues audible and visual advanced warnings to the driver.Audi pre sense637_041 31 BackWarnings against a possible collision These warnings are given within a certain time frame ahead of the last braking opportunity for braking or collision avoidance before the actual collision occurs. The timing of warnings depends on the driver's degree of activity. Depending on steering, pedal and turn signal inputs, the system classifies the driver as active or inactive and, consequently, as attentive or inattentive. If the driver is classed as attentive, the warning will be issued later than a warning for a driver classed as inattentive. At the same time, the ABS control unit J104 prefills the brake system and modifies the deployment algorithms for hydraulic brake assist. This means that hydraulic brake assist starts to build up brake pressure even at low brake pedal actuation speeds.Forwards Ξ ContentsIf driver does not respond to the warnings, however, the ABS control unit J104 generates an acute warning by jerking the brakes. The warning jerk is a very brief but easily noticeable braking impulse which does not serve to slow the vehicle down. It alerts the driver to the traffic situation and indicates to the driver that he must react immediately in order to prevent an impending collision. Depending on how attentive the driver is considered to be, the warning jerk will be produced within a certain time window ahead of the last opportunity to brake or take evasive action to avoid a collision.Braking intervention phase If the driver does not respond to the warning jerk, the ABS control unit J104 will automatically initiate emergency braking. Maximum braking pressure is applied. If the vehicle automatically comes to a halt without driver input, further audible signals will sound. These signals alert the driver to the fact that he must actively take control of the vehicle (e.g. by applying braking). If the driver fails to take control of the vehicle, e.g. in a model with automatic transmission, the system will release the brake and the vehicle will start to move.FlowchartPrecharging of the braking system, hydraulic brake assist reacts more sensitively Audible and visual driver warnings (early warning)Warning jerkEmergency or full brakingCollision637_06432 BackTowing mode If a trailer is coupled to the vehicle via a factory fitted tow bar, Audi pre sense city will only be available to a limited extent or will be unavailable.Forwards Ξ ContentsIf a trailer is detected, the engine is running and the vehicle has reached a speed of about 5 kph, the 1st display appears in the instrument cluster. If pre sense rear is also installed, the 2nd display appears before the 1st display.1st display2nd displayEmergency braking system switched offAudi pre sense: currently restricted. Towing mode637_031637_042Note The driver information display in Fig. 637_031 is expected to change at a later point in time in the instrument cluster.System characteristics • If an emergency braking manoeuvre is initiated by the vehicle, pre sense city can help reduce the vehicle's speed by up to 40 kph. • Depending on the situation, the ABS control unit J104 can instruct the hazard warning flashers (emergency braking warning) 1) to be activated.Driver prioritisation over system If the driver takes clear evasive action or brakes during the collision warning or braking intervention phases of pre sense city actions, the current actions of Audi pre sense city (e. g. early warning) will be suppressed or cancelled. If the obstacle is no longer relevant after this, Audi pre sense city will cancel assistance in this case.Effect on Audi pre sense city functions • If Audi pre sense is switched off in the MMI, the functions of Audi pre sense city are also deactivated. • If ESC is has "restricted" functionality or is "switched off", certain functions Audi pre sense city will only be available to a limited extent or will be unavailable. • If the functionality of the front camera for driver assistance systems R242 is restricted due to bad visibility or light conditions such as darkness or fog, Audi pre sense city will only be available to a limited extent or will be unavailable. • Depending on the selected mode of the Audi drive select setting, Audi pre sense city will only be available to a limited extent or will be unavailable. • If a trailer is coupled to the vehicle via a factory fitted tow bar, Audi pre sense city will only be available to a limited extent or will be unavailable. • If driver is not wearing a seat belt, certain functions Audi pre sense city will only be available to a limited extent or will be unavailable. • Audi pre sense city is unavailable up to 10 seconds after turning off the ignition.1)Not available in all c