TECHNICAL DOCUMENTATION
SSP 645 Audi 2,0l TFSI engines

This PDF is currently unavailable.
Read document text
Self Study Programme 645 For internal use onlyAudi 2.0l TFSI engines EA888 seriesAudi Service Training BackThe 4-cylinder TFSI engine by Audi represents the next evolutionary step forward, the basis being the third-generation engine. The new engine is available with a displacement of 2 litres and in 2 performance classes, one of which supersedes the previous 1.8l Gen.3 engine of performance class 1 (125 kW to 147 kW). The aim of Audi’s designers was to reduce both CO2 and particulate emissions in line with statutory requirements. The 2.0l Gen.3 BC engine shows that even fuel economy can be improved while increasing engine displacement. The abbreviation "BC" stands for B cycle, a Miller combustion cycle which has now been refined by Audi.Forward Ξ ContentsThe engine modifications for both performance classes are identical with respect to the engine mechanicals, where a number of friction-reducing measures have been implemented. There are differences as regards charge cycles and the combustion process. The performance class 1 engine operates on the Miller cycle, a patent dating from the year 1947. It was premiered in May 2015 at the Vienna Motor Symposium as the most efficient petrol engine in its class. More than 10 years earlier, Audi put into production the first turbocharged, direct injection TFSI engine and, thus, with the aid of downsizing and downspeeding, set a milestone for "Vorsprung durch Technik".This SSP contains a QR code which you can use to access additional interactive content (refer to "Information on QR codes" on page 30).645_002Learning objectives of this self study programme: This self-study programmme describes the design and function of the 2.0l 4-cylinder TFSI engine from the EA888 Gen.3 MLBevo engine series with power outputs of 140 kW and 185 kW. After you have completed this self study programme you will be able to answer the following questions: • What are the differences in terms of the engine mechanicals compared with the third-generation engines? • What are the new features of the lubrication, charging, fuel and injection systems? • How does the performance class 1 engine differ from the performance class 2 engine? • How does the Miller cycle work?2ContentsIntroductionObjective ______________________________________________________________________________________________________________________________________________________ 4 Development of the engine series _ _________________________________________________________________________________________________________________________ 5PresentationSpecifications _ ________________________________________________________________________________________________________________________________________________ 6 Third-generation MLBevo 2.0l TFSI engine ________________________________________________________________________________________________________________ 8 Third-generation MLBevo BC (Audi ultra) 2.0l TFSI engine _____________________________________________________________________________________________ 10Engine mechanicalsCrankshaft drive _____________________________________________________________________________________________________________________________________________ 12 Engine block _________________________________________________________________________________________________________________________________________________ 14 Engine oil 0W-20 _ ___________________________________________________________________________________________________________________________________________ 15 Cylinder head ________________________________________________________________________________________________________________________________________________ 16 Chain drive ___________________________________________________________________________________________________________________________________________________ 18Engine managementAir mass meter ______________________________________________________________________________________________________________________________________________ 20 Combustion process ________________________________________________________________________________________________________________________________________ 20 Miller cycle ___________________________________________________________________________________________________________________________________________________ 21 New TFSI combustion process by Audi (B cycle) _________________________________________________________________________________________________________ 22Service3-piece oil control rings ____________________________________________________________________________________________________________________________________ 27 Scope of maintenance jobs _ ________________________________________________________________________________________________________________________________ 27AppendixGlossary ______________________________________________________________________________________________________________________________________________________ 28 Test your knowledge ________________________________________________________________________________________________________________________________________ 29 Self study programmes _ ____________________________________________________________________________________________________________________________________ 30 Information on QR codes _ __________________________________________________________________________________________________________________________________ 30 Notes _________________________________________________________________________________________________________________________________________________________ 31The self study programme teaches a basic understanding of the design and mode of operation of new models, new automotive components or new technologies. It is not a repair manual! Figures are given for explanatory purposes only and refer to the data valid at the time of preparation of the SSP. This content is not updated. For further information about maintenance and repair work, always refer to the current technical literature. In the glossary at the end of this self study programme you will find an explanation of all terms written in italics and indicated by an arrow ↗.NoteReference3 BackForward Ξ ContentsIntroductionObjectiveBy adopting a process known as rightsizing, Audi has, after downsizing, taken a further, decisive step forward. Innovative engine technologies are selectively combined and configured in such a way that displacement, power output, torque, fuel consumption and operating conditions are optimally balanced. The new engines have all the fuel economy advantages of a downsized unit in partial-load operation. At higher engine loads, they draw on the benefits of the high-displacement engine. This provides an optimal combination of efficiency and performance across the entire rev band. For the first time, these engines are being used in the latest generation of the Audi A4 (type 8W). Audi also plans to employ these units in a number of Group vehicles in both longitudinal and transverse configurations. The descriptions in this self study programme refer to the longitudinal engines in the Audi A4 (type 8W) at the start of production.645_003Reference For further information about the first use of engines and the fuel system, please refer to Self Study Programme 644 "Audi A4 (type 8W)".4 BackForward Ξ ContentsDevelopment of the engine seriesThe EA113 or EA888 engine series has for many years been used in a number of Audi models and provides a broad basis for petrol engine configurations. Development of this engine series was principally focused on improving fuel economy and reducing CO2 emissions. However, one of the engines from this series is also used in sporty models, such as the Audi S3. Below you will find a short summary of the various individual engine generations and their features.Engine generationEA8883BTechnology development30/1 EA1132YearEA888 engine generation Key characteristics and features • • • • • Audi's first EA888 TFSI engine 1.8l and 2.0l variants Demand-controlled fuel system Camshaft drive via timing chain Variable valve timing on the exhaust side Further information645_0100/1Self Study Programme 384 "The Audi 1.8l 4V TFSI engine with timing chain"2 3• On-demand oil delivery • Audi valvelift system (AVS) on the exhaust side • Secondary air system for SULEV engines • Exhaust manifold integrated in the cylinder head (IAGK) • Innovative thermal management (ITM) system with actuator for engine temperature control • Boost is provided by a turbocharger with electrical wastegate actuator • Dual injection system (MPI ↗ and FSI ↗) • New TFSI combustion process • Audi valvelift system (AVS) on the intake side • Supersedes the 1.8l variantSelf Study Programme 436 "Modifications to the chain-driven 4-cylinder TFSI engine" Self Study Programme 606 "Audi 1.8l and 2.0l series EA888 TFSI engines (third generation)"3B↗ Refer to "Glossary" on page 28.5 BackForward Ξ ContentsPresentationSpecificationsPerformance class 1 engine ↗ in the Audi A4 (type 8W) Power output in kW Torque in Nm Power output in kW in efficiency mode 1) Torque in Nm in efficiency mode1)Engine speed [rpm]645_004Features Engine code Type Displacement in cm3 Stroke in mm Bore in mm Number of valves per cylinder Firing order Compression ratio Power output in kW at rpm Torque in Nm at rpm Fuel type Engine management Lambda/knock control Mixture formation Exhaust gas treatment Emission standard CO2 emissions in g/km1)Specifications CVKB 4-cylinder inline engine 1984 92.8 82.5 4 1-3-4-2 11.65 : 1 140 at 4200 – 6000 In efficiency mode: 140 at 5300 – 60001) 320 at 1450 – 4200 In efficiency mode: 250 at 1200 – 53001) Premium unleaded 95 RON Bosch MED 17.1.10 Adaptive lambda control, adaptive knock control Sequential (dual) direct injection (FSI) and multipoint injection (MPI) with adaptive idle charge compensation Close-coupled ceramic calatyst, oxygen sensors before and after catalytic converter EU 6 (W) 1142) or further information about switching to efficiency mode and the resultant changes in the power and torque curves, please refer to F page 24. 2) Audi A4 Avant with front wheel drive and S tronic ↗ Refer to "Glossary" on page 28.6 BackForward Ξ ContentsPerformance class 2 engine ↗ in the Audi A4 (type 8W) Power output in kW Torque in NmEngine speed [rpm]645_011Features Engine code Type Displacement in cm3 Stroke in mm Bore in mm Number of valves per cylinder Firing order Compression ratio Power output in kW at rpm Torque in Nm at rpm Fuel type Engine management Lambda/knock control Mixture formation Exhaust gas treatment Emission standard CO2 emissions in g/kmSpecifications CYRB 4-cylinder inline engine 1984 92.8 82.5 4 1-3-4-2 9.6 : 1 185 at 5000 - 6000 370 at 1600 - 4500 Premium unleaded 95 RON SIMOS 18.4 Adaptive lambda control, adaptive knock control Sequential (dual) direct injection (FSI) and multipoint injection (MPI) with adaptive idle charge compensation Close-coupled ceramic calatyst, oxygen sensors before and after catalytic converter EU 6 (W) 1291) / 1392)1)2)Audi A4 saloon with front wheel drive and S tronic Audi A4 Avant with quattro drive and S tronic ↗ Refer to "Glossary" on page 28.7 BackForward Ξ ContentsThird-generation MLBevo 2.0l TFSI engine(performance class 2) Below you will find a summary of the key differences compared with the third-generation 2.0l TFSI engine. If the car is equipped with a start-stop system, a Version 2.0 system is generally used. For more information about the versions of start-stop systems, please refer to Self Study Programme 630 "Audi TT (type FV)". The basis for the third-generation MLBevo 2.0l TFSI engine is the 165 kW 2.0l TFSI engine from the Audi A4 (type 8K) (engine code CNCB).Pistons• The piston has the same geometry as in the 165 kW basic engine • The piston is made from the same material as in the Audi S3 (type 8V) • 3-piece oil control ring645_016ACF system• Increased air flow • Noise reduction measures645_015Engine management• Simos 18.4 system • Throttle valve with reduced air leakage • The throttle valve and the high-pressure fuel pump are supplied by Bosch • Engine control unit interface to the FlexRay bus system645_014 8 BackForward Ξ ContentsOil supply• Modified to create space for the use of electromechanical steering (ESP) and the planned roll stabilisation system. • A non-return valve in the oil filter module allows maximum oil pressure to be built up more quickly at all lubrication points, especially when the engine is cold. There is no non-return valve in the engine block or in the cylinder head. • Increasing the oil volume between minimum and maximum oil levels ensures that a sufficient volume of oil is available at the intake end of the oil pump whenever the driver adopts an especially dynamic driving style.645_017Cylinder head• An alternative material is used to allow for higher power output and the resultant higher levels of thermal stress • The coolant jacket is now thicker • The valvegear has been modified, e.g. by using sodium-filled exhaust valves, to allow for higher power output and the resultant higher levels of thermal stress • The exhaust turbocharger has been uprated for temperature stability up to 950 °C645_018Engine block• The ventilation system has been rerouted across the balancer shafts. • The modifications to the positive crankcase ventilation system necessitate directional installation of the piston cooling jets (refer to workshop manual).645_012Modifications to ULEV 125 (USA)• No multi-point injection (MPI) • Diagnosable PCV system ventilation hose (mandatory)645_019 9 BackForward Ξ ContentsThird-generation MLBevo BC (Audi ultra) 2.0l TFSI engine(performance class 1) Below you will find a summary of the key differences compared with the third-generation MLBevo 2.0l TFSI engine with a power output of 185 kW.Fuel system• Pressure increase to 250 bar • Adaptation of the components in the high-pressure system645_021Chain drive• Longer guides • Non-circular sprocket for timing drive • Chain tensioner with lower tensioning force • Faster oil pump gear ratios, sprocket with 22 teeth (previously 24 teeth)645_029Engine management• Bosch MED 17.1.10 system • New combustion process (BC = B cycle) • Use of an air mass meter for the new combustion process645_020 10 BackForward Ξ ContentsOther modifications:• Vacuum pump by Bosch • Smaller exhaust turbocharger, adapted thermodynamics • New engine oil 0W-20 (compliant with VW 50800 and VW 50900)Cylinder head• Audi valvelift system (AVS) on the intake side • Redesigned intake ports • Masked combustion chambers • Valve guide housings for better heat dissipation • Double-lip exhaust valve stem seals645_044645_024Pistons• Friction reduction measures • Pistons with modified crowns645_022Crankshaft• Reduced main bearing diameter645_013645_02511 BackForward Ξ ContentsEngine mechanicalsCrankshaft driveWhen work began on the development of the crank train, the focus was on reducing friction and weight. However, there are several differences between the performance class 1 and 2 engines. These are explained below.OverviewPistons • Adapted pistons crownsPiston rings • 3-piece oil control ringConnecting rod • Designed as cracked conrods ↗Crankshaft • Reduced bearing diameter in performance class 1 engine645_040↗ Refer to "Glossary" on page 28.12 BackForward Ξ ContentsCrankshaftThe main bearings of the performance class 2 engine have the same diameter as in the third-generation engine. The main bearings of the performance class 1 engine are of the same size as in the previous 1.8l TFSI engine. This has made it possible to achieve further weight savings. Both crankshafts uniformly have 4 counterweights.Performance class 1Performance class 2645_025645_023Pistons and valvesThese components for the performance class 2 engine have, to the greatest possible extent, been adopted from the precedessor engine. Only the piston rings have been modified. A 3-piece oil control ring is now used (refer to "3-piece oil control ring" on page 27). Further modifications were made to the performance class 1 engine due to the higher compression levels and the new TFSI combustion process. The combustion chambers have larger crumple zones (masking) necessitating the use of smaller intake valves. The enlarged crumped zones enhance the swirling action of the fuel/air mixture inside the cylinder. Accordingly, use is made of shaped valve recesses in the piston crowns and an enlarged "epsilon zone". The intake and exhaust valves also have slightly longer stems. On the other hand, the diameter of the exhaust valves is unchanged.Performance class 1Performance class 2MaskingSmaller intake valvesEqui-sized exhaust valvesAdapted valve recessesEnlarged epsilon zoneFlow recess645_028645_027 13 BackForward Ξ ContentsEngine blockPositive crankcase ventilationDue to the Audi valvelift system (AVS) being relocated to the intake side of the performance class 1 engine, it was necessary to adapt the positive crankcase ventilation system. Instead of the previous extraction points in the crank chambers of cylinders 3 and 4, the blow-by gases ↗ are now extracted from the crank chambers in the area of cylinders 1 and 2. The blow-by gases flow from here into the housing of a balancer shaft. A slotted sleeve which allows through-flow of the blow-by gases is integrated in the balancer shaft housing. The rotation of the balancer shaft (centrifugal effect) ensures that a large proportion of the oil is separated from the blow-by gases (coarse oil separator) and flows back into the oil pan. The onward flow path of the blow-by gases to the fine oil separator module on the cylinder head is otherwise identical to that of the third-generation 2.0l TFSI engine.Blow-by gas extraction points in crank chambers 1 and 2Balancer shaftFlow of blow-by gases to the fine oil separator module645_032Slotted sleeveBlow-by gases in the engine blockBlow-by gas intake points in the crank chamber of cylinders 1 and 2↗ Refer to "Glossary" on page 28. Reference For more information about the fine oil separator module and how it works, please refer to Self Study Programme 606 "Third-generation Audi 1.8 and 2.0l TFSI EA888 series engines".14 BackForward Ξ ContentsPiston cooling jetsGiven that the performance class 1 engine uses a modified positive crankcase ventilation system where the blow-by flow gases flow around one of the balancer shafts, it was also necessary to effect changes in the manufacturing of the engine block. As a result, the piston cooling jets are now no longer abutting the crank chamber. Previously, a contact edge was required for this purpose. For this reason, care must be taken to ensure that the piston cooling jets are exactly aligned during installation in the new engine. If this is not the case, the reliable functioning of the piston cooling system cannot be guaranteed.Previous versionNew version645_048645_026Contact edge for the piston cooling jet on the crank chamberPiston cooling jet requiring directional installationReference For further information about installation of the piston jets, please refer to the workshop manual.Note All modifications and new features described below refer to the performance class 1 engine only.Engine oil 0W-20To further reduce the friction and thereby improve fuel economy, the performance class 1 engine uses an engine oil with the 0W-20 specification in compliance with the VW 50800 and VW 50900 standards. The new engine oil has the following properties: • It allows faster pressure build-up because it has a low viscosity, enabling it to reach the lubrication points more quickly. In addition, it is more cost-effective for drivers with a short distance profile because less friction loss occurs in the engine (lower oil resistance). • A chemical marker has been added to the new oil (green coloration) so it can be identified more easily in a laboratory. • The oil is not downwardly compatible, i.e. it is only suitable for use in approved engines. • Oil pressure builds up slightly more slowly due to the low viscosity of the oil. This is why the oil pump runs slightly more slowly in the third-generation MLBevo 2.0l TFSI engine of performance class 1. In addition, a new non-return valve is integrated in the oil filter housing.Note Refer to the manufacturer's specifications with regard to the new engine oil, e.g. in the current vehicle owner's manual. The oil viscosity and the oil standards specified in the current maintenance chart must always be observed.15 BackForward Ξ ContentsCylinder headWhereas the cylinder head of the performance class 2 engine is to a large extent a carry-over from the third-generation 2.0l TFSI engine, a number of modifications have been made to the cylinder head of the performance class 1 engine. This was necessary to implement the new TFSI combustion process. However, this has also improved running refinement and reduced knock tendency.The cylinder head of the performance class 1 engine has the following modifications: • The Audi valvelift system (AVS) has been moved to the intake side • The cylinder head cover has been adapted to accommodate the new installation position of the Audi valvelift system (AVS) • The compression ratio has been increased from 9.6:1 to 11.7:1 by reducing the volume of the compression chamber • Modified valve masking • Lowering of combustion chamber ceiling by 9 mm • Modified piston shape • FSI injectors are positioned closer to the combustion chambers. • The intake ports have been redesigned, i.e. made straighter, to optimise charging motion. • The positions of the spark plug and high-pressure injector as well as the shape of the piston have been adapted to the new combustion chamber design. • Valve guide housings for better heat dissipation. • Double-lip exhaust valve stem seals.Performance class 1Cylinder head cover Cam adjustment actuators 1 – 8 (AVS) F366 – F373Exhaust valve stem sealsIntake portsInjectors, cylinders 1 – 4 (FSI) N30 – N33 Masking645_03116 BackForward Ξ ContentsCylinder head cover and camshaftsThe performance class 1 engine uses an adapted cylinder head cover to suit the new installation position of the Audi valvelift system (AVS). As a result, the connections for the cam adjustment actuators of the Audi valvelift system (AVS) are located on the intake side. The intake camshaft has external gearing upon which are arranged the movable cam elements of the Audi valvelift system (AVS).Performance class 1Performance class 2Cylinder head coverOn the intake side: Cam adjustment actuators 1 – 8 (AVS) F366 – F373Cylinder head coverOn the exhaust side: Cam adjustment actuators 1 – 8 (AVS) F366 – F373Intake camshaft with movable cam elementsIntake camshaftExhaust camshaftExhaust camshaft with movable cam elements645_047 645_046Reference For more general information about how the Audi valvelift system (AVS) works, please refer to Self Study Programme 411 "Audi 2.8l and 3.2l FSI engine with Audi valvelift system".17 BackForward Ξ ContentsChain driveThe basic configuration of the chain drive has, to a large extent, been adopted from the third-generation engine. However, it too has been systematically improved. Due to the further reduction in friction loss, less power input is required to drive the chain drive. Even more extensive modifications were made in the case of the performance class 1 engine. Below you will find a summary of the various individual modifications.Chain guideThe guide rail guides the chain between the two camshaft gears, during which, however, it has barely any contact with the chain. To provide skip protection, the guide rail has been extended and is bolted onto the cylinder head cover.Guide railUpper skip guardGuide railLower skip guardGuide railA skip guard is attached to both ends of the guide rail. This precaution has already been incorporated into series production of the third-generation 2.0l TFSI engine.645_03318 BackForward Ξ ContentsBalancer shaft driveThe balancer shaft drive incorporates the following friction-reducing modifications. • Narrower chain design and reduction in number of chain links from 96 to 94 • Layout with fewer deflections • New clamping rail and guide rails • New sprockets • Chain damper with softer dampingBalancer shaftsTiming drive gearTiming drive gearThe special design of the cam contours on the camshafts produces forces within the timing drive. The timing chain drive sprocket therefore has a non-circular shape, similar to that of a cloverleaf. This reduces both chain forces and movement within the chain tensioner, allowing a more simple chain tensioner design to be realised (without a pressure reduction valve).Oil pumpOil pump driveThe gear ratios have been modified in such a way that the oil pump now runs more quickly. The sprocket now has 22 teeth instead of the previous 24. This modification was necessary to ensure that all lubrication points are reliably supplied with the new 0W-20 specification engine oil.19 BackForward Ξ ContentsEngine managementAir mass meterThe MED 17.1.10 engine management system by Bosch is used in the performance class 1 engine. In this system air intake is monitored by an air mass meter. This is necessary because the throttle valve is, as far as possible, open during the active B cycle. As a result, only a single air mass meter is needed to monitor the return flow.645_034Combustion processFor the first time in an Audi, the performance class 1 engine utilises a new combustion process. One of the primary objectives was to improve fuel economy. This is essentially accomplished by shortening the compression phase. In the early years of combustion engine development similar efforts were undertaken to improve the efficiency of petrol engines, resulting, for instance, in the Atkinson and Miller cycles.Atkinson cycleAs early as the year 1882 James Atkinson unveiled an engine designed to significantly increase the thermal efficiency of the internal combustion engine while circumventing patents on the four-stroke engine by Nicolaus August Otto. In Atkinson's engine all four strokes are performed by a specially designed crank mechanism within a single crankshaft cycle. The fact that the crankshaft must produce two upward movements of the pistons to achieve this allowed Atkinson to use pistons in different lengths. He took advantage of this difference to create a shorter compression stroke and a longer expansion stroke (working stroke). The crank mechanism is designed in such a way that the compression ratio is smaller than the expansion ratio. The piston travels less distance during the working and exhaust cycles than during the intake and compression cycles. Intake valve closing is heavily retarded, i.e. after BDC (bottom dead centre) during the compression stroke. An advantage is that the higher expansion ratio increases efficiency. The working stroke takes longer thereby minimising the amount of waste heat in the exhaust gases. However, there is a drawback in that relatively little torque is available at low rpm. The Atkinson engine needs to be running at a relatively high speed before it can reliably deliver power without any risk of stalling. The Atkinson cycle is very difficult to implement on account of the complex crank mechanism geometry.Piston at bottom dead centre (BDC) between intake and compression cyclesPiston at bottom dead centre (BDC) between working and exhaust cyclesPiston travel during the intake phasePiston travel during the working stroke645_035645_036Scan the QR code to find out more about how the Atkinson cycle works. 20 BackForward Ξ ContentsMiller cycleAnother option for changing the compression and expansion ratios is the Miller cycle. The inventor Ralph Miller took out a patent on this principle in 1947. His aim was to transfer the Atkinson cycle to conventional crankshaft engines and utilise the its beneficial effects while consciously dispensing with the Atkinson cycle's complex crank mechanism. To date, the Miller cycle has mainly been used in the engines of several Asian vehicle manufacturers.Basic principleA special valve gear control unit is used in engines which work on the Miller cycle principle. Its primay function is to close the intake valves earlier than in a conventional petrol engine. In the intake stroke in particular, this has the following effects: • Less air intake • Compression is roughly the same • Lower compression ratio • Higher expansion ratioAdvantages • Varying the valve opening times, i.e. by increasing the expansion ratio, allows throttle-free load control and therefore significantly increases efficiency. • A lower compression ratio means fewer nitrous oxides in the exhaust gases. • The charging temperature is lower. • Combustion is improved.Drawbacks • Less torque at low engine speeds This can, for example, be compensated by turbocharging. • Lower efficiency due to the smaller effective compression ratio. This can be compensated by turbocharging and charge air cooling. • At least one camshaft phasing adjustment is required.21 BackForward Ξ ContentsNew TFSI combustion process by Audi (B cycle)The new TFSI combustion process in the 2.0l TFSI engine of performance class 1 is basically a modified Miller cycle. This provides better fuel economy than the equivalent third-generation 1.8l TFSI engine, although friction within the engine is higher due to the larger engine displacement. The valve opening times on the intake side are controlled by the Audi valvelift system (AVS). For this purpose, the AVS switches to a single piston which, firstly, provides alternate valve opening times (earlier closing of the intake valves) and, secondly, reduces the opening width of the intake valves. This combustion process is known as a "combustion process with extended expansion phase" or "B cycle". Strictly speaking, it is not so much that the expansion phase is extended as that the compression phase is shorter. The term "extended expansion phase" would only apply if one were to compare this combustion process with that of a low-displacement engine, which achieves a similar degree of fresh gas compression with a reduced overall stroke.Comparison of the valve and piston positionsAt partial load • • • • High basic compression Intake valve closes early Short valve opening times Very low exhaust emissions At full throttle • • • • Retarded intake valve closing Long valve opening time High torque High power outputLess valve lift means reduced intake valve opening width. The result is a smaller opening diameter.645_042The full valve stroke allows normal intake valve opening. The result is a larger opening diameter.645_043Valve lift adjustment with Audi valvelift system (AVS) There are two cam contours for each valve on the cam elements. The cam timings are adapted for the required engine characteristic. This affects both valve opening length and time as well as valve lift (opening diameter). In the case of the short cam paths (highlighted in green in the adjacent diagram), valve opening length is 140° crank angle. In the case of the full stroke with long cam paths (highlighted in red), valve opening length is 170° crank angle.Different cam height, affecting valve lift140° crank angle 170° crank angle645_05222 BackForward Ξ ContentsCharacterisationThe new TFSI combustion process by Audi is characterised by the following features: • Activation in the partial-load range of the engine • Shorter compression phase (similar to Miller cycle) • Expansion ratio is higher than compression ratio (similar to Miller cycle) • Higher geometric compression ratio • Modified combustion chamber design (masking, valve diameter, piston design) • Modified cylinder head intake port (to create swirl)Comparison of piston positions in the compression strokeThis diagrams below shows the piston position at the intake closing point for the third-generation 2.0l TFSI engine using the conventional combustion process and the third-generation 2.0l TFSI engine using the new B cycle combustion process. They show the position of the piston at the intake closing point (hV = 1.0 mm) in a third-generation 2.0l TFSI engine compared with the third-generation 2.0l TFSI engine at an engine speed of 2000 rpm and at an effective mean pressure (pme) of 6 bar.Third-generation 2.0l TFSI engine with conventional combustion processThird-generation 2.0l TFSI engine with new combustion process (B cycle)Intake valve closes at 20° crank angle in advance of BDCPiston travel during the intake phaseIntake valve closes at 70° crank angle in advance of BDC645_041Scan the QR code to find out more about the modifications to the cylinder head.Scan the QR code to find out more about the modifications to the overall engine.23 BackForward Ξ ContentsOperating strategiesEngine start The intake camshaft is in contact with the small cam, i.e. short lift and short intake phase with 140° crank angle as well as short intake valve opening time. Fuel is injected during the start phase in the compression stroke and/or intake stroke (single, multiple), depending on engine temperature. Fuel stratified injection (FSI) is carried out once or twice up to a coolant temperature of 70 °C. The system will then switch to multipoint injection (MPI) depending on engine speed, load and temperature. Depending on load demand in the B cycle or the full throttle map.Warm-up phaseEngine running at normal operating temperature In the B cycle• The B cycle combustion process is active at idle and in the partial-load range. • The intake camshaft is in contact with the small cam. • Fuel is injected through the MPI injectors up to an engine speed of 3000 rpm in the low and partial-load ranges. • The intake manifold flaps are only activated in the low-load range. • The throttle valve is open as wide as possible. • Charge pressure is increased (up to 2.2 bar absolute). This allows optimal charging of the cylinders with fresh gas during the short intake valve opening time. • The intake camshaft is switched to full-throttle contour by the Audi valvelift system (AVS). A 170° crank angle intake phase is now implemented. • The intake manifold flaps are open in the full throttle range. • Depending on the characteristic map, FSI fuel injection is employed. Up to 3 injections are possible, depending on requirements. The amount of fuel injected and the injection timings are variable. • The throttle valve now switches to normal operating mode. If the driver selects efficiency mode in Audi drive select, engine torque is reduced to 250 Nm by the engine control unit and a power output of 140 kW is achieved at only 5300 rpm.Full throttle mapefficiency modeOil pump control steps320 Nm140 kWEffective mean pressure [bar]Low pressure settingHigh pressure settingEngine speed [rpm]645_04924 BackInjection and cooling systemForward Ξ Contents320 Nm140 kWEffective mean pressure [bar]FSI injectionMPI injection105 °C of coolantEngine speed [rpm]645_050Intake manifold flaps and Audi valvelift system (AVS)320 Nm140 kWEffective mean pressure [bar]AVS with short valve liftAVS with long valve lift1Intake manifold flaps closedEngine speed [rpm]645_0511Threshold for switching back from long to short valve lift25 BackForward Ξ ContentsProcesses inside the cylinderThe conditions inside the combustion chamber are shown below in comparison with a conventional petrol engine. Working stroke Intake The piston moves from TDC to BDC. The intake closes well in advance of BDC. After the intake valve closes, the pressure inside the cylinder drops because the piston is still moving downwards. Conventional combustion process New combustion process (BC = B cycle)Compression The piston moves from BDC to TDC. The decrease in pressure first has to be equalised. The pressure is again equalised with the pressure in the intake stroke at 70° crank angle in advance of TDC. In a conventional combustion process the pressure is already higher at this stage. The new combustion process allows a faster pressure increase due to the higher geometric compression ratio. The pressure at TDC is roughly equal (approx. 12 bar). Overall, the new combustion process has a higher mean pressure level and, therefore, higher efficiency. Start of working cycle The piston moves from TDC to BDC. In the new combustion process the pressure level is higher during the expansion phase due to the lower combustion chamber volume.Exhaust The piston moves from BDC to TDC. The new combustion process brings a small gain in efficiency due to differences in air/fuel mixture mass and heat transfer.26 BackForward Ξ ContentsService3-piece oil control ringsThe 3-piece oil control rings conists of 2 thin steel plates as well as a spacer and expander spring. This spring presses the steel plates (oil control rings) against the cylinder wall. The 3-piece oil control rings are highly adaptable to the shape of the cylinders despite their reduced preload. They have less friction and skim off the oil efficiently.Assembly notesMake sure that the expander springs are correctly positioned during assembly. This is particularly important when using pistons supplied with rings pre-fitted. It is possible that the spring ends may have slipped over one another. To simplify checking, both ends of the springs have colour markings. The expander springs must not be overlapping as otherwise the oil control ring will not function properly. The joints of the 3-piece oil control ring must be installed rotated through 120°.Joint3-piece oil control ring consisting of:Upper steel plateSpacer and expander springLower steel plateColour marking 1Colour marking 2645_045Note As regards mounting the 3-piece oil control rings on the pistons, it is important to follow the procedure described in the workshop manual.Scope of maintenance jobsChanging the oil Air filter change interval Spark plug change interval Fuel filter change interval Timing gear According to service interval display, between 15,000 km / 1 year and 30,000 km / 2 years depending on driving style and conditions of use. 90,000 km 60,000 km / 6 years – Chain (lifetime)Note The specifications in the current service literature generally apply.27 BackForward Ξ ContentsAppendixGlossaryThis glossary explains to you all terms which are shown in italics and indicated by an arrow ↗ in this self study programme.↗ Blow-by gasesWhen the engine is running, blow-by gases flow from the combustion chamber and past the piston into the crankcase. This is due to the high pressure inside the combustion chamber and the absolutely normal leakage that occurs around the piston rings. Blow-by gases are extracted from the crankcase by the positive crankcase ventilation system and re-admitted into the combustion chamber.↗ Performance classIn the Federal Republic of Germany mobile working machines are subdivided into performance classes according to the Federal Immission Control Act (regulations on emission limits for internal combustion engines) and the guidelines of the European Parliament. Levels I, II, IIIA, IIIB and IV as well as performance classes 19 kW – 36 kW, 37 kW – 55 kW, 56 kW – 74 kW, 75 kW – 129 kW and 130 kW – 560 kW are differentiated by variable and nonvariable engine speed.↗ Cracked conrodThis term derives from the method by which the conrod is manufactured. The conrod shaft and conrod head cap are separated from another by controlled cracking. The advantage of this process is that it provides an exact fit and a high degree of joining accuracy whereby only these two parts fit together perfectly.↗ MPIMPI is the abbreviation for Multi Point Injection, an injection system for petrol engines where fuel is injected into the intake manifold upstream of the injectors. In some engines it is used in combination with the FSI direct injection system.Fracture surfaces645_054Predetermined breaking pointMPI injector↗ FSIFSI is the abbreviation for Fuel Stratified Injection, a technology used by Audi for direct fuel inejction into the combustion chamber in petrol engines. Fuel is injected at pressures of up to 200 bar.Intake manifold645_053FSI injectorCombustion chamber645_05528 BackForward Ξ ContentsTest your knowledge1. A new engine oil (0W-20) will be introduced at the market launch of the Audi A4 (type 8W). For which engines can it be used?□ □ □a) High-performance engines only, i.e. S models. b) For all new engines and retroactively for all other engines. c) For suitably rated new petrol and diesel engines.2. Which aspects of the crankcase ventilation system in the new 2.0l TFSI engine have been modified compared with the previous engines (EA888 Gen.3)?□ □ □a) The system has an overhead configuration. The ventilation system is active at high engine load. b) The crankcase is ventilated via a new extraction point located on one of the balancer shafts. Otherwise, the ventilation pathway, blow-by gas treatment and ventilation are the same as in the previous engine generation. c) The crankcase ventilation system of the new 2.0l TFSI engines for the Audi A4 (type 8W) is unchanged compared with the EA888 Gen.3 engines.3. What is the task of the Audi valvelift system (AVS) on the 2.0l TFSI engine with engine code CVKB?□ □ □a) The Audi valvelift system (AVS) is activated when the engine management system requests the B cycle combustion process in the partial-load range. This reduces the lift and opening times of the intake valves. b) If the Audi valvelift system (AVS) adjusts the cam elements on the intake camshaft at the request of the engine management system, the opening width of the exhaust valves is reduced. This improves inflow into the exhaust turbocharger at low engine speeds and allows a faster build-up of charge pressure. c) If the Audi valvelift system (AVS) is activated by the engine management system in the partial-load range, the valves in 2 cylinders are no longer opened.Test solutions: 1 c; 2 b; 3 a29 BackForward Ξ ContentsSelf study programmesFor more information about the technology of the EA888 series engines, please refer to the following self study programmes. SSP 384 The Audi 1.8l 4V TFSI Engine with Timing Chain SSP 411 The Audi 2.8l and 3.2l FSI engine with Audi valvelift system• Engine mechanicals • Demand-controlled fuel system• Audi valvelift system (AVS)SSP 436 Modifications to the chaindriven 4-cylinder TFSI engineSSP 606 Audi 1.8l and 2.0l series EA888 TFSI engines (3rd Generation)• Demand-controlled oil pump • Turbocharging • Engine mechanicals • High and low pressure fuel systemSSP 626 Basics of Audi engine technologySSP 644 Audi A4 (type 8W)• Fuel system • Basic information about the engine mechanicals and subsystemsInformation on QR codesThis SSP has been enhanced by electronic media (animations, videos and mini-WBTs) for more effective illustration of the content. The references on the pages to the e-media are concealed within QR codes, which are two-dimensional pixel patterns. You can scan those codes using a tablet or smartphone running the appropriate app, which will decipher the hidden web address. To follow the link you require an Internet connection. To read the QR codes, you need to obtain a QR scanner from the Apple® or Google® app store and install it on your mobile device. For some media, other players may be required. On PCs and notebooks, the e-media can be selected in the SSP PDF and then retrieved online after you log into GTO. All e-media are managed on the Group Training Online (GTO) platform. Before you can retrieve media, you need to set up a user account for GTO and log in after scanning the QR code. On an iPhone, iPad and many Android devices, you can store your login credentials in the mobile browser. This way, you can log in more easily the next time. Make sure you protect your mobile device against unauthorised use by setting a PIN. Please note that using the e-media over the mobile phone network can be very expensive, especially if using data roaming tariffs abroad. This is your responsibility alone. The best option is to use a Wi-Fi connection. Apple® is a registered trademark of Apple® Inc. Google® is a registered trademark of Google® Inc.30 BackForward Ξ ContentsNotes31All rights reserved. Technical specifications are subject to change. Copyright AUDI AG I/VK-35 service.training@audi.de AUDI AG D-85045 Ingolstadt Technical status 12/15 Printed in Germany A15.5S01.32.20645Audi Vorsprung durch Technik