TECHNICAL DOCUMENTATION
SSP 602 Audi Q3

This PDF is currently unavailable.
Read document text
Self Study Programme 602 For internal use onlyAudi Q3Audi Service TrainingAs the most recent and compact addition to the Audi SUV series, the Audi Q3 caters to the demands of a modern, urban world while offering all the authentic plus-points of an SUV (Sports Utility Vehicle). It complements the successful Audi SUV family started in March 2006 with the launch of the Audi Q7. The Audi Q5 is the sports car among SUVs and has successfully led the way in the premium mid-range SUV segment since 2008. The Audi Q3 stands out by virtue of its sporty, muscular appearance and its modern, coupe-like styling, and yet it is an authentic SUV through and through. This concept makes the Audi Q3 appealing to more than one target group because it meets a wide variety of customer requirements.The charismatic Audi Q3 is not what you would consider a "smaller sibling of the Q5 and Q7", but a vehicle with a very distinctive identity. It has the rugged character of a fully-fledged A-segment SUV coupled with a coupe-like styling unmatched in this segment — and yet it has all the hallmarks of an Audi. The Audi Q3 is compact, flexible and functional and therefore is also a good option for people who do a lot of city driving. The growing number of Audi model series has also led to a growing number of production sites. While the Audi Q3 is an all-new addition to the model range, the production facility in Martorell (Seat Spain) is a new addition to the Audi production network.602_012Learning objectives of this Self Study Programme: This Self Study Programme provides you with general information about the Audi Q3. After you have worked your way through this Self Study Programme, you will be able to answer the following questions: • What defines the deployment stages of the airbag? • What materials are used in the B post? • Which unit bearings are used in the gearbox? • How is the damper control function monitored? • Which sensors are integrated in the electromechanical parking brake control unit? • What modifications have been made to Audi active lane assist? • Which new adapters are available for the Apple iPod?2ContentsIntroductionIn brief _______________________________________________________________________________________________________________________________________________________ 4BodyOverview _____________________________________________________________________________________________________________________________________________________ 6 Body structure _______________________________________________________________________________________________________________________________________________ 8 Panorama glass sunroof ___________________________________________________________________________________________________________________________________ 10 Bumper system _____________________________________________________________________________________________________________________________________________ 11 Tow bar ______________________________________________________________________________________________________________________________________________________ 11Occupant protectionComponents ________________________________________________________________________________________________________________________________________________ 12 Front airbags _______________________________________________________________________________________________________________________________________________ 14 Seat belt reminder _________________________________________________________________________________________________________________________________________ 17EnginesThe 2.0l TFSI engine _______________________________________________________________________________________________________________________________________ 18 2.0l TDI engine (2nd gen) _________________________________________________________________________________________________________________________________ 20 Engine/gearbox mounting ________________________________________________________________________________________________________________________________ 22 Fuel system _________________________________________________________________________________________________________________________________________________ 23 Exhaust systems ___________________________________________________________________________________________________________________________________________ 24 Engine/gearbox combinations ____________________________________________________________________________________________________________________________ 25Running gearOverview ____________________________________________________________________________________________________________________________________________________ 26 Axles _________________________________________________________________________________________________________________________________________________________ 27 Electronic damper control _________________________________________________________________________________________________________________________________ 29 Brake system _______________________________________________________________________________________________________________________________________________ 31 Steering system ____________________________________________________________________________________________________________________________________________ 35 Wheels and tyres / tyre pressure indicator ______________________________________________________________________________________________________________ 42Electrical systemPower supply _______________________________________________________________________________________________________________________________________________ 43 Data bus diagnostic interface J533 (gateway) __________________________________________________________________________________________________________ 44 Onboard power supply control unit J519 ________________________________________________________________________________________________________________ 47 Installation locations of the control units _______________________________________________________________________________________________________________ 48 Topology ____________________________________________________________________________________________________________________________________________________ 50 Exterior lighting ____________________________________________________________________________________________________________________________________________ 54 Audi drive select ____________________________________________________________________________________________________________________________________________ 60 Driver assistance systems _________________________________________________________________________________________________________________________________ 62Air conditioningIntroduction ________________________________________________________________________________________________________________________________________________ 65 Refrigerant circuit __________________________________________________________________________________________________________________________________________ 67 Connected components ___________________________________________________________________________________________________________________________________ 68InfotainmentOverview of versions _______________________________________________________________________________________________________________________________________ 70 Installation locations of control units ___________________________________________________________________________________________________________________ 72 Aerials overview ____________________________________________________________________________________________________________________________________________ 73 Sound systems _____________________________________________________________________________________________________________________________________________ 74 Displays _____________________________________________________________________________________________________________________________________________________ 76 iPod adapter plus __________________________________________________________________________________________________________________________________________ 77ServiceInspection and maintenance ______________________________________________________________________________________________________________________________ 78AnnexSelf Study Programmes ___________________________________________________________________________________________________________________________________ 793IntroductionIn brief602_033602_034602_035The Self Study Programme teaches a basic knowledge of the design and functions of new models, new automotive components or new technologies. It is not a Repair Manual! Figures are given for explanatory purposes only and refer to the data valid at the time of preparation of the SSP. For maintenance and repair work, always refer to the current technical literature.!NoteReference4602_036Length in mm Width in mm Height in mm Track width, front in mm Track width, rear in mm Wheelbase in mm Trailer load in kg with brake at a gradient of 8 % Kerb weight in kg Max. gross weight in kg4385 1831 1608 1571 1575 2603 2000 1510 2110Cabin width, front in mm Cabin width, rear in mm Headroom, front in mm Headroom, rear in mm Through-loading width in mm Load sill height in mm Boot capacity in l Tank capacity in l Drag coefficient in cw1417 1362 1019 969 1067 781 460/1365 64 0,321) 2) 3) 4)width, shoulder room width, elbow room without a roof aerial, vehicle height is reduced by 18 mm. maximum headroomAll dimensions are given in millimetres and refer to the unladen weight of the vehicle.5BodyOverviewThe Audi Q3 sees Audi extending its SUV range to include an A-segment derivative model. The body was developed with the focus on lightweight design coupled with a high standard of vehicle safety. The high quality of the materials in the Audi Q3 offers not only advantages in terms of weight reduction, but also provides the basis for meeting highest standards of vehicle safety.AttachmentsThe attachments, and specifically the doors, are of lightweight steel construction with double sealing lines and sealed joins. Further weight reductions were achieved by the use of aluminium in the bonnet and tailgate. The body including attachments weighs 423 kg, the body cell accounting for 303 kg and attachments for the remaining 120 kg.6602_099Key: Mild steels High-strength steels Modern high-strength steels Ultra-high-strength steels Ultra-high-strength steels (hot-formed) Aluminium panels7Body structureResistance spot welding is mainly used as a joining method in body construction for the Audi Q3. There are approximately 4000 spot welds in the body cell of the Audi Q3. In addition, resistance spot welds are combined with a high-strength bonding process in the body areas with critical requirements, such as vibration comfort and passive safety. Adhesive bonds are increasingly assuming sealing and corrosion protection functions in the Audi Q3. A special expanding adhesive is used in the plenum chamber area, eliminating the need for additional seaking. In total, approximately 74 m of adhesive is used in the body cell.Ultra-high-strength hot-formed componentsUltra-high-strength hot-formed components are installed in the following areas: • • • • • Bulkhead (tunnel bridge) A post, top B post, inside Chassis rail (sill) Tunnel8B post, insideThe B post of the Audi Q3 is partially tempered in the shaping process. This imparts ultra-high-strength properties to the steel in top and bottom sections and only high-strength properties to the steel in the mid-section. The allows the forces exerted on the vehicle body during a side impact to be effectively absorbed.Ultra-high-strengthHigh-strength Ultra-high-strength602_101602_100Key: Soft steels 26 % High-strength steels 42 % Modern high-strength steels 15 % Ultra-high-strength steels 4 % Ultra-high-strength steels (hot-formed) 13 %9Panorama glass sunroofThe Audi Q3 can be equipped with a panorama glass sunroof. The panorama glass sunroof consists of an opening front glass element and a fixed rear glass element. It is designed as an externally guided roof system. In this concept, the front glass panel "rides" over the rear glass panel, increasing the headroom inside the occupant cell.Operating elementsThe operating elements of the roof system are located in the front light module above the rear-view mirrror. The glass panel is opened by means of a four-way switch and always moves in the direction in which the switch is pressed or pushed. It is a two-stage switch. With the first stage, the panel can be moved manually into any position. With the second stage, the panel moves automatically into its end position. The lift position is obtained by pressing the switch and the close position by pulling the switch.Open glass panelClose roller blindOpen roller blind Tilted glass panel Close opened glass panel Close tilted glass panel602_102Reinforcing frameThe body versions with and without panorama glass sunroof achieve the same level of rigidity by using the reinforcing frame shown in red.Roof frameHigh-strength adhesive602_10310Bumper systemThe front bumper combines design with conformity to the various technical requirements relating to vehicle safety, protection of vulnerable road users, ease of repair and long life. The supporting element is the chrome frame around the radiator grille. This frame is inserted into the mounting boxes of the plastic frame during bumper assembly. The three-part bumper cover and the front spoiler are attached to the radiator grille. This multi-part design allows individual components to be replaced so that minor damage can be repaired with a minimum of expense. This is a factor contributing to the affordable insurance group classification of the Audi Q3. The rear bumper consists of a cover with welded-in enclosing part and a spoiler with integrated diffusor for the exhaust tail pipes. The bumper is attached to the rear of the body via the enclosing part. The pre-assembled guiding parts are attached flush with the body side sections at the side. The wrap-around tailgate necessitated relocating some of the tail lights into the bumper. These lights are integrated in the enclosing part together with the sensors for the optional Audi side assist system or the keyless entry aerials. The rear sensors for the optional parking aid or park assist function are attached to the spoiler or cover.602_104602_105Tow barAt the customer's request, the Audi A3 can be factory-fitted with a tow bar with a manual swivelling ball head. The swivelling ball head is released by pulling a cable. The actuating button is located conveniently on the left-hand side behind the boot side trim. An LED flashing red or lit green indicates to the customer whether the ball head is locked or released. This ensures that the customer is reliably informed when the tow bar is ready for use or safely swivelled in.Actuating button for swivelling ball headIndicator lamp (LED), lit green or flashing red602_106 11Occupant protectionComponentsThe occupant protection system in the Audi Q3 comprises the following components and systems: • • • • • • • • • • Airbag control unit Driver and front passenger airbags Front side airbags Head airbags Front airbag crash sensor Crash sensors for side impact detection in the B posts Crash sensors for side impact detection in the C posts Seat belt warning for all seats Seat belt switches on all seats in the seat belt buckles Seat occupancy sensor in front passenger seat602_139Additional equipmentThe vehicle can optionally be equipped with rear side airbags and/ or a keyswitch for deactivating the front passenger airbag with associated warning lamp. Due to the different requirements and statutory regulations which apply to car makers in the various markets, equipment is subject to change, particularly in the US market.Key to figure on page 13: E24 E25 E224 E258 E259 E609 G128 G179 G180 G256 G257 G283 Seat belt switch, driver side Seat belt switch, front passenger side Airbag disabling switch, passenger side (optional) Rear seat belt switch, driver side Rear seat belt switch, front passenger side Rear central seat belt switch Seat occupancy sensor, front passenger side Side airbag crash sensor, driver side Side airbag crash sensor, front passenger side Rear side airbag crash sensor, driver side (C post) Rear side airbag crash sensor, driver side (C post) Front airbag crash sensor, driver side (front end) K19 Seat belt reminder warning lamp K75 Airbag warning lamp K145 Passenger airbag off warning lamp (PASSENGER AIRBAG OFF) (optional) N95 N131 N153 N154 N199 N200 N251 N252 T16 Driver side airbag igniter Front passenger side airbag igniter 1 Seat belt pretensioner igniter 1, driver side Seat belt pretensioner igniter 1, front passenger side Side airbag igniter, driver side Side airbag igniter, front passenger side Head airbag igniter, driver side Head airbag igniter, front passenger side 16 pin connector, diagnostic portJ234 Airbag control unit J285 Control unit in dash panel insert J533 Data bus diagnostic interface (gateway)!12Note The diagrams in the chapter "Occupant protection" are schematic diagrams provided for a better understanding.System overviewThe system overview shows by way of example the equipment options available for a vehicle marketed in Germany.602_003Key: Powertrain CAN bus Dash panel insert CAN bus Convenience CAN bus Diagnostics CAN bus Input signal Output signal13Front airbagsSingle-stage airbag modules are used in the Audi Q3 for the driver and front passenger. These are equipped with different gas generators. On the driver's side there is a solid propellant generator and on the front passenger side a hybrid gas generator which inflates the airbag.Driver side airbag igniter N95The igniter activated by the airbag control unit ignites the priming charge, in turn igniting the actual propellant charge. If the developing gas pressure exceeds a defined threshold due to combustion of the propellant charge, the rupture foil opens the outlets admitting the gas to the airbag. The airbag unfolds and is inflated.Outlet portSpacerPropellant charge Rupture foil602_001FilterPropellant chargeIgniterPriming charge14Front passenger side airbag igniter 1 N131The airbag control unit J234 activates the front passenger side airbag igniter 1 N131. The activated igniter breaks the rupture disc 1 and ignites the propellant charge.Due to the combustion of the propellant charge, the pressure inside the compressed gas cylinder rises to the point at which rupture disc 2 breaks. The gas mixture unfolds and inflates the airbag.IgniterPropellant chargeSpring602_002Rupture disc 1Compressed gas cylinderRupture disc 2Definition of terminology used for airbags in Audi vehicles The deployment stages of an airbag were previously defined by the propellant charges inflating the airbag with gas. Today, the deployment stages of an airbag are determined by the number of installed igniters. In this context, it does not matter if an igniter ignites a propellant charge or activates an adaptivity feature (opening of an additional outlet).Old designation Igniter 1 2 2 3 Propellant charges 1 2 1 2 Adaptivity None None yes yes Settings 1 2 1 2New designation Settings 1 2 2 315Airbag control unitBasically, the task of the airbag control unit J234 is to detect a crash, evaluate all input information and activate the relevant systems accordingly. The airbag control unit is installed beneath the centre console.Head airbagsGas generators with pressurised gas cylinders are used for inflating the airbags. In these gas generators, the igniters have only the task of opening the compressed gas cylinders. The escaping compressed gas unfolds and inflates the airbags. The head airbags are designed in such a way that, after unfolding, they cover nearly the entire window area in the occupant cell.Side airbagsThe side airbags are so-called "soft cover modules" identical to those used in other Audi modules as well. These modules are equipped with solid propellant generators.Inertia reel seat beltsThe Audi Q3 is equipped with pyrotechnic seat belt tensioners in the front seats. The familiar ball-type seat belt tensioners are used. The seat belt tensioners are driven by balls stored in a reservoir tube. In the event of a crash, the propellant charge is ignited by the airbag control unit. If the propellant charge is ignited, the expanding gases set the balls in motion, driving them around a gear wheel into the ball receptacle. The seat belt reel is coupled to the gear wheel and also rotated by the balls, tautening/tensioning the seat belt.Pyrotechnic propellant chargeSeat belt Ball receptacleGear wheel Reservoir tube filled with balls602_01116Seat belt reminderFront seat belt reminderIf the front occupants are not wearing their seat belts, they are alerted to this by the seat belt reminder warning lamp K19 after the ignition is turned on. The warning lamp K19 comes on if the driver and/or front passenger has not fastened his/her seatbelt. When the vehicle exceeds a speed of 25 kph, the front occupants are also reminded to put on their seat belt by an acoustic signal. If the acoustic warning has started and the vehicle decelerates to a speed of less than 5 kph within the first 30 seconds, the acoustic warning is suppressed. If the vehicle's speed increases again to above 25 kph, the acoustic warning resumes. If the first 30 seconds have elapsed since commencement of the acoustic warning, the acoustic warning does not stop unless the seat belts are fastened. The total duration of the acoustic warning is limited to 126 seconds. The acoustic warning also varies in volume and frequency.Seat belts not fastened warningTerminal 15on offVisual warningactive offSpeed 25 kph 5 kph 30 sec.Acoustic warningactive off 30 sec. approx. 96 sec.602_004Rear seat belt reminderAfter the ignition is turned on, the status of the seat belts (fastened/not fastened) is indicated on the centre display of the dash panel insert for 31 seconds. Each change of status is indicated for an additional 31 seconds. If a rear passenger removes his/her seat belt while the vehicle is travelling (at a speed higher than 25 kph), an acoustic warning sounds once and the relevant indicator on the centre display flashes for 31 seconds. The airbag control unit J234 receives signals from the rear belt switches on the driver side E258, on the front passenger side E259 and in the centre E609 indicating whether the seat belts are fastened.Seat belt fastened Seat belt not fastened602_005Warnings on rear seat belt statusTerminal 15on off notSeat belt Visual displayfastened fastened active offlights up 31 sec.flashes 31 sec.lights up 31 sec.Acoustic warning Speedactive off 25 kph 25 kph602_00617EnginesThe 2.0l TFSI engineTechnical features • Charging by means of exhaust turbocharger • Start-stop system and recuperation • Four-valve cylinder head with camshaft phaser on the intake side • Adapted belt drive (minus the power steering pump) • Engine management by timing chain • Intake manifold with flaps • Volume-controlled oil pump • Upgraded high-pressure injectors602_009Reference For further information about the design and operation of the 2.0l TFSI engine, refer to Self-Study Programme 436 "Modifications to the chain-driven 4-cylinder TFSI engine".18Specifications Torque-power curve 2.0l TFSI engine with engine code CCZC Power in kW Torque in Nm2.0l TFSI engine with engine code CPSA Power in kW Torque in NmEngine speed [rpm]602_010Engine code Type Displacement in cm3 Power output in kW (hp) at rpm Torque in Nm at rpm Number of valves per cylinder Bore in mm Stroke in mm Compression ratio Powertrain type Engine management Fuel Emissions standard CO2 emission in g/kmCCZC Four-cylinder inline engine 1984 125 (170) at 4300 — 6200 280 at 1700 – 4200 4 82.5 92.8 9.6 : 1 • quattro 6-speed manual gearbox • quattro 7-speed S tronic Bosch MED 17.1 Premium unleaded (sulphur-free) 95 RON EU V 174CPSA Four-cylinder inline engine 1984 155 (211) at 5000 – 6200 300 at 1800 – 4900 4 82.5 92.8 9.6 : 1 • quattro 7-speed S tronic Bosch MED 17.1 Premium unleaded (sulphur-free) 95 RON EU V 179192.0l TDI engine (2nd gen)Technical features • Common rail injection system with exhaust turbocharger • Electromagnetic injectors • Engine management via timing chain • Injection system with injection pressures of up to 1800 bar • Twin balancer shafts • Start-stop system and recuperation • Adapted belt drive (minus the power steering pump) • 4/2-way valve in the cooling system • Electrical exhaust gas recirculation valve • Low temperature EGR cooling • Particulate filter with separate, integrated oxidising catalytic converter602_008Reference For further information on the design and operation of the 2.0l TDI engine, refer to Self Study Programme 420 "The 2.0l TDI Engine with Common Rail Injection System" and Self Study Programme 442 "The 1.6l TDI Engine with Common Rail Injection System".20Specifications Torque-power curve 2.0l TDI engine with code CFFB Power in kW Torque in Nm2.0l TDI engine with code CFGC Power in kW Torque in NmEngine speed [rpm]602_032Engine code Type Displacement in cm3 Power output in kW (hp) at rpm Torque in Nm at rpm Number of valves per cylinder Bore in mm Stroke in mm Compression ratio Powertrain typeCFFB Four-cylinder inline engine 1968 103 (140) at 4200 320 at 1750 – 2500 4 81.0 95.5 16.5 : 1 • 6-speed manual gearbox (front-wheel drive) • 6-speed manual gearbox (quattro) • quattro 7-speed S tronic Bosch EDC 17 CR Diesel to EN 590 1800 EU V 138CFGC Four-cylinder inline engine 1968 130 (177) at 4200 380 at 1750 – 2500 4 81.0 95.5 16.5 : 1 • quattro 7-speed S tronicEngine management Fuel Maximum injection pressure in bar Emissions standard CO2 emission in g/kmBosch EDC 17 CR Diesel to EN 590 1800 EU V 15621Engine/gearbox mountingThe engine/gearbox mounting is a key factor influencing noise and vibration comfort in a vehicle. Because of the dynamic and sporty suspension set-up, hydraulic unit bearings are used in the Audi Q3. A standard torque roll bearing, also known as a self-aligning bearing, is used for transverse mounted engines. It is based on the separation of the lead-bearing and torque multiplication functions. The hydraulic damping in the bearings essentially reduces lowfrequency engine/gearbox movements and thus optimises vibration comfort. The resultant engine torque is absorbed by the stabiliser link rod, which is designed as an elastomer bearing and connected directly to the gearbox and vehicle body via the subframe.OverviewHydraulic engine bearing Damping fluid with injector plateCarrier partSupport armDiaphragmHydraulic gearbox bearing602_097Stabiliser link bar22Fuel systemThe vehicle has a 64 litre saddle tank. A favourable filler tube routing and a continuously rising fuel vent line allow easy refueling. A lever-type sender in each of the main and secondary chambers ensures high display accuracy. A three-wire thick film sensor is used for fuel level indication. The additional wire supplies redundant information that can be used to arithmetically eliminate contact resistance due to aggressive fuels. Consequently, contact resistance is no longer a factor affecting the accuracy of fuel level indication. The lever-type sensor is mounted to the bottom-supported swirlpot of the fuel delivery unit. Fuel supply to the petrol and diesel engines is regulated according to demand. Only the actual amount of fuel needed is made available. Brushless, electrically commutated fuel pumps are used. Only one tank version is available for the European-market petrol and diesel engines. The fuel tank is ready for new fuel types E101) and B72).Fuel tank and fuel level senderConnections for the activated charcoal filter (ACF)Lever-type sender for fuel level indicationExpansion tank Bracket for fuel pump control unit J538 Float-type vent valve with roll-over functionMain chamberFuel pump (in-tank pump) G23 Lever-type sender 1 Lever-type sender 2 Tank ventilation Suction jet pumpSecondary chamber602_0961) 2)E10 = petrol with a 10 % ethanol content B7 = diesel with a 7 % biodiesel content23Exhaust systemsThe overall weight of the usual exhaust systems was reduced by using high-grade stainless steel, low wall thickness in the exhaust pipes and lightweight silencers. Due to its low weight and low exhaust backpressure, the overall catalytic converter and silencer system significantly reduces CO2 emissions. Both ceramic and metal catalytic converter substrates are used in the exhaust gas aftertreatment system. To reduce structure-borne sound, the shells of the rear silencer have reinforcing beads.Oxidising catalytic converter2.0l TDI engineDiesel particulate filterDecoupling elementRear silencerThe 2.0l TFSI engineReinforcing beads for structure-borne sound reductionClose-coupled catalytic converter with ceramic substrateDecoupling elementUnderbody catalytic converter with ceramic substrateCentre silencer (designed as an reflection silencer)Rear silencer (designed as an absorption silencer)602_098 24Engine/gearbox combinations0BH02Q2.0l R4 TFSI (125 kW)0BH2.0l R4 TFSI (155 kW)0BH02Q0BB2.0l R4 TDI (103 kW)0BH2.0l R4 TDI (130 kW)Gearbox designations:0BB 02Q 0BH 6-speed manual gearbox (front-wheel drive) 6-speed manual gearbox (quattro) 7-speed double clutch gearbox – S tronic (quattro)602_107 25Running gearOverviewA fundamental goal in the development of the suspension system for the Audi Q3 was to set new standards in driving experience in this premium SUV segment. Focal points were driving enjoyment, sportiness and driving comfort in addition to good off-road capability. Special emphasis was placed on providing the Audi Q3 with a balanced suspension set-up. The Audi Q3 delivers the classic Audi driving experience coupled with long-distance driving comfort and excellent off-road performance. To achieve this, use is made of a newly designed McPherson strut front axle with aluminium wishbones and a multi-link rear suspension. This was done by combining an array of innovations comprising proven and systematically enhanced component solutions. The improved axles for front and quattro drive are basically the same as those in the Audi A3 ’04, but have been readapted for the Audi Q3 with entirely new elastokinematics. The good driving experience results from the low gross weight (the Q3 with 2.0 TFSI engine weighs 1530 kg to DIN unladen), an axle load distribution of 58.5 % on the front axle, the wide track on the front axle (1571 mm) and rear axle (1575 mm) as well as a range of tyres with very large diameters from 16 to 19 inches. In the basic version, the Audi Q3 has a 16 inch brake system as standard on the front and rear axles and an electromechanical parking brake.602_043VersionsThree different suspension versions are available for the Audi Q3. The regular suspension system is standard. A sports suspension 20 mm lower than the standard suspension is optional. The sports suspension is designed specially for customers who attach more importance to sportiness and agility than to off-road performance. The likewise optional electronic damper controls system offers more advanced fine tuning of the driving dynamics in combination with Audi drive select. It significantly improves driving comfort without neglecting meeting the demands on a sporty SUV. The ride height of the suspension system with electronic damper control is identical to that of the standard suspension system.26AxlesFront axleThe front axle of the Audi Q3 is based on the transverse platform of the Group. A key new development is the rear control arm bearing. It is a major factor contributing to the outstanding steering response and agility of the Audi Q3. The minimal bearing motion in the transverse direction provides a high camber thrust rate and optimal cornering stability. The kinematic front axle configuration in combination with the design of the rubber bearings results in neutral handling at the limit of traction with slight understeer and is therefore easily manageable. A large castor angle and a large castor offset at wheel centre provide good straightline stability.602_044Linear-rate steel springs with progressive-rate polyurethane auxiliary springsTube-type anti-roll barAnti-roll bar tie rodCoil-over suspension strut bearings with separate spring/damper mountings602_045The control arm and wheel carrier are connected by a spherical joint.Wishbone Forged aluminium partThree-piece engine/gearbox mounting Aluminium chill castingWheel carrier Nodular cast iron27Rear axleThe Audi Q3 has a four-link suspension based on the suspension system already used on the Audi A3 ’04 and Audi TT ’07. The engine/gearbox carrier also supports the rear axle differential in the quattro version. The axle components of the front wheel drive and quattro models are identical. The components and bearing elements are designed on the premise that high transverse rigidity means greater agility, sportiness and driving safety and that longitudinal resiliency means enhanced driving and roll comfort.Upper control arm Welded sheet-metal constructionSpring link Welded steel constructionEngine/gearbox mount Sheet steel constructionHigh-strength linearrate steel spring602_046Tie rod Steel constructionTie rod Sheet steel constructionThin-walled tubular anti-roll barsWheel carrier Aluminium castingWheel bearing with integral wheel hubChassis alignment and set-upProvision has been made for individual front axle toe adjustment in service workshops. Toe and camber can be adjusted individually at the rear axle.28Electronic damper controlDesign and operationThe Audi Q3 uses the Monroe CES dampers featured previously on the Audi A6 ’05 (CES = continuously controlled electronic suspension). The optional system allows the driver to adapt the damping forces to the driving situation in three modes: auto, dynamic and comfort. The mode is selected in Audi drive select. The mode can be changed while the vehicle is stationary and while driving. The previously used setting is memorised and restored when the vehicle restarts. A key new feature is the efficiency mode in Audi drive select. In this mode the damper setting is identical to that in auto mode.Damping adjustment valve, rear left N338 Body acceleration sender, rear left G343Damping adjustment valve, front left N336Body acceleration sender, front right G342 Body acceleration sender, front left G341 Damping adjustment valve, front right N337602_047Vehicle level sender, rear left G76 Damping adjustment valve, rear right N339ECD control unit (electronically controlled damping) J250 Vehicle level sender, front left G78Vehicle level sender, front right G28929Twin-tube vibration damperTwin-tube vibration dampers whose damping force is regulated by electrically activated solenoid valves are used for electronic damper control. The activation currents vary from approximately 0.2 to 2.0 A, with damping force increasing with electrical current. The damper is not activated while the vehicle is stationary. The necessary activation current is computed by the control unit. The activation currents are generated by the control unit power modules. The vibration dampers are activated in milliseconds depending on road condition, driver input and various driving situations such as braking, accelerating or cornering. In addition to the sensor signals, the control unit evaluates signals from components such as the steering, engine, gearbox, the brake system and the driver assistance systems. The vehicle level senders monitor vehicle ride height at a sampling rate of 800 Hz. This is sufficient to additionally calculate the vibration characteristics of the axle components (unsprung masses). The movement of the vehicle body (sprung masses) is monitored by the body acceleration sensors.602_048Electrically activated solenoid valve (damping adjustment valve)Reference In terms of design and general functionality, the electronic damper control system of the Audi Q3 is identical to the DCC Adaptive Chassis Control system implemented for the VW Tiguan. For more detailed information on the design and function of DDC, refer to SSP 406 "DCC Adaptive Chassis Control".Service operationsThe system has self-diagnostic capability. The service operations are the same as for the systems which are already used on other Audi models.30Brake systemOverviewThe Audi Q3 delivers outstanding braking performance thanks to a generously proportioned 16-inch brake system. The known additional functions of Hold Assist, Hill Start Assist and speeddependent emergency braking are available thanks to the electromechanical parking brake (EPB). For the first time in an Audi model, use is made of a high-performance ESP system by TRW specially designed to meet the demands on a powerful SUV.602_049Design and function of the wheel brakesFront axle Rear axleEngine type Brake type Number of pistons Piston diameter Brake disc diameter2.0l TFSI 2.0l TDI 16“ FN3 57/25/13.5 floating caliper brake 1 57 mm 312 mm, vented brake discs2.0l TFSI 2.0l TDI 16“ CII 41 EPB aluminium floating caliper with actuators for the Electric Parking Brake (EPB) 1 41 mm 282 mm, solid brake discs31Brake servo and master brake cylinderAn 11-inch single brake booster with a "single rate" characteristic is used on left hand drive models. For reasons of installation space, a 7/8 tandem brake booster with two diagonally split brake circuits is used on right hand drive models. The aluminium tandem master brake cylinder with 23.8 mm diameter provides the necessary performance and short brake pedal travel combined with low actuation forces. A non-contact Hall sensor on the master brake cylinder delivers the signal for the brake light function.602_052Brake applicationThe foot controls have a modular design in order to save weight. Each module comprises the pedal lever and associated bearing pedestal. The components of the accelerator and clutch pedals are manufactured from fibre-reinforced plastic. For strength reasons, the brake pedal bearing pedestal is manufactured as a sheet steel part with a weight-saving shell design.602_053Service operationsThe service operations on the brake system are the same as for systems already in use on other Audi models.32Electro-mechanical parking brake (EPB)Design and operation The Audi Q3 uses the electromechanical parking brake (EPB) featured already in other Audi models. A new feature is the integration into control unit J540 of sensors for transverse acceleration G200, yaw rate G202 and longitudinal acceleration G251. These integrated sensors replace the ESP sensor unit G419. The design and function of parking brake motors V282 and V283 are identical to those of the components already in use. The functions of control unit J540 are also identical to those of the functions implemented in current Audi models with EPB.Parking brake pressure switch F234Parking brake motor, right V283Electromechanical park and handbrake control unit J540 with integration of sensors for transverse acceleration G200, yaw rate G202 and longitudinal acceleration G251602_054Parking brake motor, left V282Service operationsAfter online coding of control unit J540 has been carried out in service workshops, the basic setting procedure must now be carried out in order to calibrate the aforementioned sensors.33ESPDesign and operation The Audi Q3 features an ESP system by TRW (TRW 450) for the first time in an Audi model. In additoin to the basic functions EBD, ABS, ASR, EDL and ESP, the following additional functions have been implemented: Standard equipment: • Electronics transverse lock for front wheel drive vehicles • Torque vectoring on vehicles with quattro drive • Hydraulic Brake Assist • Hydraulic brake booster • Brake disc wiper • Hydraulic brake fading compensation • Driver steering recommendation (DSR) Optional equipment: • Trailer stabilisation system • Tyre pressure indicator • Park assist602_055Reference The above-mentioned functions are already implemented on other Audi models in an identical or similar form. For detailed information about new features of the park assist function in the Audi Q3, please refer to SSP 600 "New Driver Assist Systems 2011".Active wheel speed senders are used on the Audi Q3.The steering wheel sender G85 is an integral part of the steering units on right hand drive models. It is integrated in the steering column switch module on left hand drive models.602_056Service operationsThe control unit and hydraulic unit cannot be separated in service workshops. In both left and right hand drive models, the steering angle sender G84 is calibrated in the power steering control unit J500. Other service operations are identical to those of the EPS systems already used on other Audi models.34Steering systemOverviewThe Audi Q3 has an electromechanical steering system identical to that used previously on the A3 ’04, TT ’07 and A7 Sportback models. Compared to a conventional hydraulic steering system, fuel savings of up to 0.3 litres per km are achievable. The manually adjustable safety steering column ensures an optimal ergonomic steering wheel position for any driver. The Audi Q3 is equipped as standard with the tried and tested four-spoke steering wheel. A newly developed three-spoke steering wheel is optional and will in future be available for all Audi Q series models.Safety steering column with cardan shaft, mechanically adjustable, adjustment range 50 mm horizontally and verticallyFour-spoke steering wheel as basic equipment See page 41 for equipment options602_057Electromechanical steering system with axial parallel drive by electric motor35Electromechanical steeringOverview In contrast to the Audi A7 Sportback, the Audi Q3 uses an electromechanical steering system with axial parallel drive in left hand drive models 1). The compact unit essentially consists of the actual steering gear, the electric motor for power assistance, the electronic control unit, a sensor for measuring steering torque and a sensor for monitoring the position of the electric motor rotor.Power steering motor V187Rack and pinion steering gearSteering torque sender G269Power steering control unit J500602_058Drive The electric motor is driven directly by the power electronics of the control unit. The rotational movement of the engine is converted to the linear movement of the rack by a ball screw which essentially consists of a recirculating ball nut. The recirculating ball nut is driven through a toothed belt by the engine. The functional principle is basically the same as that of the steering system used in the Audi A7 Sportback. There are differences in the way in which the recirculating ball nut is driven.Recirculating ball nut602_0591)Right hand drive models have the ZF electromechanical steering system featured previously on the Audi A3 ’04 and TT ’07 models.Power steering motor V187Toothed beltReference For detailed information about the general design and function of the steering gear, refer to SSP 480 "Audi A7 Sportback Running Gear".36The functional principle of the ball screw is similar to that of a conventional screw and nut system. The convolutions are replaced by ball races, and the connection between the screw (spindle) and nut (recirculating ball nut) is made by balls running in the races. The balls roll in a closed loop like the roller elements in a bearing.This is achieved by using a return channel in the recirculating ball nut which connects the lead-in and lead-out ends of the recirculating ball nut ball races. Reversing the direction of movement of the recirculating ball nut and the rolling direction of the balls also changes the linear direction of movement of the rack.Direction of rotation of the recirculating ball nutLinear movement of the spindle/rack602_060602_061Ball raceReturn channelRecirculating ball nutSteering torque sender G269 Steering torque is measured by the steering torque sender G269. The steering input shaft and steering pinion are interconnected by a torsion bar. Turning the steering wheel results in minimal rotation of the torsion bar and therefore also of the steering input shaft relative to the steering pinion. This angle of rotation is measured by the sensor. The angle of rotation is a direct measure of steering torque. The design and function of the steering torque sender are identical to those of the component which is atready used on the Audi A7 Sportback.Steering input shaftSteering torque sender G269 Steering pinion602_062Reference For detailed information, please refer to SSP 480 "Audi A7 Sportback Running Gear".37Power steering motor V187 The Audi Q3 used a permanently excited three-phase AC synchronous motor for steering assistance. This motor concept was chosen on the basis of the following key advantages: • Synchronous motors are noted for their compact design and high performance. • Permanent excitation eliminates the need for collector rings for transmitting the exciter current to the rotor.Toothed belt drive pinionThe necessary phase voltages are calculated by the control unit and applied to the stator coils through the power module. The stator comprises nine field coils. They are arranged in groups of three connected in series and energised by a sine-wave current. The three electric currents are phase offset relative to one another. The three magnetic fields generated thus produce a resultant rotating magnetic field which induces a synchronous rotational movement in the rotor. The rotor comprises six permanent magnets alternately arranged in a north-south direction. For smoother running, the six-pole ring magnet is magnetised at an angle.Rotor position sensorStatorRotor602_063Receiver coilsRotor discRotor position detection The rotor position sensor monitors the position of the rotor. The control unit must know the exact position of the rotor to be able to calculate the phase voltages required for the rotating magnetic field (electronic sensor controlled commutation). The measured value of the rotor position sensor is also utilised to define the steering stops. To avoid hard mechanical stops, "soft" limits stops are implemented by the electromechanical steering system.The exciter coil is supplied with a sine-wave exciter voltage. The alternating magnetic field which develops around the exciter coil acts upon the rotor disc. The rotor disc conducts the magnetic flux of the alternating magnetic field generated by the exciter coil to the receiver coils. This induces in the receiver coils an alternating voltage which is phase offset proportional to the position of the rotor disc relative to the exciter voltage.602_064Exciter coil38General functional principle shown using a steering operation as an exampleWhen the steering wheel starts to turn, the torsion bar connecting the steering input shaft to the steering pinion is rotated. This rotation is measured by the steering torque sender and indicated to the control unit. At the same time, the control unit receives further signals relevant to the functionality of the steering system: • the steering angle from the steering angle sender G85 • the driving speed from the ESP control unit • the speed the internal combustion engine from the engine control unit • and the current position of the electric motor rotor V187 through its rotor position sensor. The control unit evaluates this information and calculates the electrical current and the phase shift of the drive current for electric motor V187 on the basis of a coded map in the control unit. When the motor is activated, its torque is transmitted to the recirculating ball nut by the toothed belt. Depending on the drive current level, a defined amount of torque is provided for steering assistance. The resultant force acting on the rack is made up of the steering torque applied by the driver and the torque generated by the electric motor.674 25 3Steering movement by the driverDirection of movement of the rotor with recirculating ball nutForce acting on the rack as the sum total of the steering force applied by the driver and the steering assistance provided by the electric motor 1602_065Key: 1 2 3 4 5 6 7 Steering movement by the driver Signal from the steering torque sender Signal from the steering angle sender Activation of the electric motor Recirculating ball nut drive Steering torque applied by the driver Steering torque applied by the electric motor39Additional functionsIn the Audi Q3 too, various adjustments/functions are implemented by the electromechanical steering system in addition to the basic function. The driver is assisted in certain driving situations in the following ways: • Speed-dependent power assisted steering (servotronic) is implemented as standard. • Return of the steering wheel to the straight-ahead position after steering lock has been applied is assisted by the "active reset" function. This enhances both directional stability and steering comfort. • The "straight-ahead driving correction" function takes the strain off the driver when driving in a straight line against a constant, sustained crosswind or when driving on a cambered road surface. A corrective steering torque is generated by active steering assistance. • The Audi Q3 also uses the "DSR" (driver steering recommendation) function implemented previously in the Audi A3 ’04 and A7 Sportback in combination with ESP and electromechanical steering. This function is described in SSP 480 "Audi A7 Sportback Running Gear". • Steering comfort is enhanced by implementing damped maximum steering locks.Operation and driver informationThe driver can choose between three different steering maps. Setting of the steering characteristic - from comfortable to sporty - is coupled to the setting in Audi drive select. If efficiency mode is selected, a balanced characteristic is set (this is equivalent to the "auto" setting).efficiencyAudi drive selectHandbookdynamic comfort autoCar Systems602_066Service operationsNo provision has been made for the replacement of individual steering unit components (except for the track rods and boots). In the event of a fault, the complete unit must be replaced. The power steering control unit J500 is encoded online. After coding has been completed, a basic setting procedure must be carried out. This entails defining which advanced functions (e.g. park assist, DSR) are to be implemented by the steering system. It is necessary to carry out an adaption process for the maximum steering locks in order to avoid "hard" end stops. As a requirement for this, the steering angle sender G85 must be calibrated and initialised.602_05840Steering wheelsThe steering wheel and airbag have been systematically designed for lightweight construction. Weight has been reduced by approximately 0.5 kg by the use of ultra-lightweight magnesium in the steering wheel skeleton and fibre-reinforced plastic in the airbag. Equipped with two paddle switches, the multifunction steering wheels allow user-friendly operation of the driver information system including telephone, audio devices and onboard computer. Two additional optional paddle switches allow gear changes to be performed manually on models with S tronic. The steering wheels come in two optional colour versions matching the vehicle interior.Overview4-spoke designLeather steering wheel, 4-spoke designMultifunctional leather steering wheel of 4-spoke designMultifunctional leather steering wheel of 4-spoke design incl. paddle switches OptionstandardOptionOptionSports leather steering wheel of 3-spoke designMulti-function sports steering wheel of 3-spoke design OptionMulti-function sports steering wheel of 3-spoke design including paddle switches OptionOption41Wheels and tyres / tyre pressure indicatorWheels and tyres overviewThe wheel/tyre combinations used for the Audi Q3 ensure superb handling, comfort and driving stability for a vehicle of this class. All engine types are equipped with size 6.5J x 16 forged aluminium wheels even in the basic trim. The weight saving compared to a standard cast aluminium wheel is approximately 1.7 kg per wheel. The Audi Q3 comes as standard with a Tire Mobility System (TMS). A Minispare spare wheel of size 4.0J x 18 with rim depth 27.5 and 145/80 R18 tyres is optional.12463 Basic 16" wheel 6.5J x 16 ET33 Forged aluminium wheel brilliant silver finish 215/65 R16 (basic wheel for all engine types) 1 Optional 17“ wheels 7J x 17 ET43 2 Lightweight aluminium wheel, brilliant silver finish 235/55 R17 Optional 18“ wheels5 Winter wheels 6.5J x 16 ET33 Forged aluminium wheel, brilliant silver finish 215/65 R16 M&S77J x 18 ET43 4 Lightweight aluminium wheel, brilliant silver finish 235/50 R1867J x 17 ET43 3 Lightweight aluminium wheel, brilliant silver finish 235/55 R177J x 18 ET43 5 Lightweight aluminium wheel, polished 235/50 R186.5J x 17 ET33 7 Lightweight aluminium wheel, brilliant silver finish 215/65 R17 M&STyre pressure indicatorThe Plus tyre pressure indicator already available in other Audi models is also optional for the Audi Q3. The design, functionality and operation are identical to those of the systems already in use.42Electrical systemPower supplyBatteryThe car battery in the Audi Q3 is housed in the engine bay and protected by an insulating blanket or battery box. Battery size, type and protection are dependent on engine, trim and country version. All Audi Q3 models have an energy management system and a brake energy recuperation function. All Q3 models with a start-stop system come fitted with an AGM battery. The following batteries are used on the Audi Q3: Standard batteries • • • • • 44 Ah/220 A 51 Ah/280 A 60 Ah/280 A 61 Ah/330 A 72 Ah/380 AAGM batteries (on models with start-stop) • 68 Ah/380 AJump start points / fuses and relaysThe battery positive terminal and the earthing stud near the left-hand strut tower are used for battery charging and jump starting.e-box with fuses and relays Designation of fuses in current flow diagram "SB" BatteryEarthing stud Relay carrier below lefthand side of dash panelFuse carrier below onboard power supply control unit Designation of fuses in current flow diagram "SC"602_108Relay carrier on onboard power supply control unitVoltage test on the e-box Designation of fuses in current flow diagram "SA"Fuse carrier below left-hand side of dash panel Designation of fuses in current flow diagram "SC" Relay carrier below the e-box43Data bus diagnostic interface J533(gateway)In a full-spec Audi Q3, there are five LIN slaves connected to the data bus diagnostic interface J533: • • • • • Sliding sunroof control unit J245 Sunroof roller blind control unit J345 Battery monitor control unit J367 Alternator C Voltage stabiliser J532In the case of the Audi Q3, a distinction is made between two versions of the data bus diagnostic interface J533: a version for models with infotainment CAN and a version for models with MOST bus system.J245 J367J394 CJ533LINJ532602_109Summary Designation Installation position Bus systems Data bus diagnostic interface J533 Dash panel, driver footwell Convenience CAN bus (always fitted) Powertrain CAN bus (always fitted) Dash panel insert CAN bus (always fitted) Diagnostics CAN bus (always fitted) Extended CAN bus (option) Infotainment CAN bus (dependent on infotainment version) MOST bus (dependent on infotainment version) LIN bus Tasks • • • • • • 100 kbit/s 500 kbit/s 500 kbit/s 500 kbit/s 500 kbit/s 100 kbit/s 22 Mbit/s 20 kbit/s Single-wire capable Not single-wire capable Not single-wire capable Not single-wire capable Not single-wire capable Single-wire capable Ring structure (open circuit results in failure) Single-wire bus systemNetworking gateway Diagnostic interface Transport mode (energy-optimised for transportation or long periods of non-use) Wake-up monitor (monitors bus standby mode or bus wake-up function) Data supplier for on-board computer with efficiency program Energy management LIN master for: • Battery monitor control unit J367 (always fitted) • Alternator C (always fitted) • Voltage converter J532 (on models with start-stop system only)• Control of the panorama glass sunroof and sunroof roller blind LIN master for: • Sliding sunroof control unit J245 (option) • Sunroof roller blind control unit J345 (option) Diagnostic address4419Battery monitor control unit J367Summary Designation Battery monitor control unit J367Battery negative poleInstallation positionat the car battery's negative terminalTasksMeasurement of: • car battery charging and discharge currents • battery voltage • battery temperatureDiagnostic addressNone, LIN slave, measured data and diagnostics via data bus diagnostics interface J533 (gateway)602_110Battery monitor control unit J367Alternator CSummary Designation Alternator CInstallation positionat bottom front right of engine, driven by central ribbed V beltTasksCharging the vehicle batteryDiagnostic addressNone, LIN slave, measured data and diagnostics via data bus diagnostics interface J533 (master)602_111Alternators with LIN controllers are used on the Audi Q3.45Voltage stabiliser J532Summary Designation Voltage stabiliser J532Installation positionunder the seat at the front leftVersions200 watts or 400 wattsTasksTo stabilise the voltage for selected components during the start cycle602_112Diagnostic addressNone, LIN slave, measured data and diagnostics via data bus diagnostics interface J533 (master)Depending on trim, the following electrical equipment is connected to the 200 watt voltage stabiliser: • Control unit in dash panel insert J285 • Automatic anti-glare rear-view mirror Y7 • Radio R • Information electronics control unit 1 J794 • CD changer R41 • MMI display J685 • TV tuner R78The 400 watt version is used on models equipped with an Audi sound system. On these models, the radio is connected to the second, stabilised output. The digital sound package control unit J525 is not connected to the voltage stabiliser. This control unit has its own internal voltage stabiliser.Sliding sunroof control unit J245 and sunroof roller blind control unit J394Summary Designation Sliding sunroof control unit J245 Sunroof roller blind control unit J345Installation positionin the roof areaTasksOpening and closing the sliding sunroof or the sunroof roller blindDiagnostic addressNone, LIN slave, measured data, diagnostics and actuator test via data bus diagnostics interface J533 (master)602_113Reference For further information about the data bus diagnostic interface J533, the battery monitor control unit J367 and the voltage stabiliser J532, please refer to Self Study Programme 477 "Audi A1". Here you will also find a functional description of the alternator C.46Onboard power supply control unit J519The onboard power supply control unit J519 of the Audi Q3 basically corresponds to that in the Audi A1. Difference to the onboard power supply control unit in the Audi A1: in the A1, the front windscreen wiper is activated by the onboard power supply control unit via two relays. The Q3 has a "LIN wiper", i.e. the onboard power supply control unit J519 is the LIN master of the wiper motor control unit J400. J519 is mounted to the dash panel relay carrier in the driver footwell area.602_133Advanced KeyThe Audi Q3 can be equipped with an advanced key similar in design and function to that of the Audi A1. The Q3 can be locked and unlocked "keylessly" even from the front pasenger door side. For this reason, the Q3 requires one aerial and one touch sensor more than the system in the A1.Terminal 30 E408 R134 R135 R136 R138 R139 Terminal 58stTerminal 30 Gearbox selector position "P" Engine control unit J623 "Terminal 50"Request7.5 AEntry and start authorisation control unit J518Electrical steering column lock control unit J764Terminal 15"Wake up" LineG415G416Onboard power supply control unit J519Internal aerial for central lockingE234 602_134Key: E234 Tailgate handle release button E408 Entry and start authorisation control unit G415 Exterior door handle touch sensor, driver side G416 Exterior door handle touch sensor, front passenger side R134 Driver side aerial for entry and start authorisation R135 Front passenger side aerial for entry and start authorisation R136 Rear bumper aerial for entry and start authorisation R138 Interior aerial -1- for entry and start authorisation R139 Interior aerial -2- for entry and start authorisationReference For further information about the onboard power supply control unit J519, the terminal control unit, the immobiliser and the advanced key, please refer to Self Study Programme 477 "Audi A1".NO contactConvenience CAN bus7.5 A47Installation locations of the control unitsSome of the control units shown in the overview are optional and/ or country-specific equipment. Refer to the current service literature for details of controls unit positions as well as instructions for installation and removal.J387J668J745 J518Ρ242 J844 J623 J685 J500 J533 J743 J285 J764 G85 J667 J104 J843 J519 J527 J453 J532 J794 J255 J587 J540J386Key: G85 J104 J234 J250 J255 J285 J345 J386 J38748Steering angle sender ABS control unit Airbag control unit ECD control unit (electronically controlled damping) Climatronic control unit Control unit in dash panel insert Trailer detector control unit Door control unit, driver side Door control unit, front passenger sideJ388 J389 J453 J492 J500 J518 J519 J525 J527 J532 J533Rear left door control unit Rear right door control unit Multifunction steering wheel control unit Four-wheel drive control unit Power steering control unit Entry and start authorisation control unit Onboard power supply control unit Digital sound package control unit Steering column electronics control unit Voltage stabilizer Data bus diagnostic interfaceJ389J345 J769 J791J525J234J492J770 Radio R R78R41J772J388602_092J540 J527 J623 J667 J668 J685 J743 J745 J764 J769 J770Electromechanical park and handbrake control unit Selector lever sensors control unit Engine control unit Headlight power module, left Headlight power module, right MMI display Twin clutch gearbox mechatronics Cornering light and headlight range control unit Electrical steering column lock control unit Audi lane assist control unit Audi lane assist control unit 2J772 J791 J794 J843 J844 R R41 R78 R242Reversing camera system control unit Audi parking system control unit Information electronics control unit 1 Vehicle tracking system interface control unit Headlight assist control unit Radio CD changer TV tuner Front camera for driver assistance systems49TopologyModels with infotainment CAN busAlarm horn H12Wiper motor control unit J400Anti-theft alarm sensor G578Rain and light detector sensor G397Humidity sensor G355 Control unit in dash panel insert J285Onboard power supply control unit J519Diagnostic portMultifunction steering wheel control unit J453Steering column electronics control unit J527 Data bus diagnostic interface J533 Climatronic control unit J255 Engine control unit J623 Twin clutch gearbox mechatronics J743Door control unit, rear left J388Door control unit, driver side J386 Airbag control unit J234Door control unit, rear right J389Door control unit, front passenger side J387Selector lever sensors control unit J587Trailer detector control unit J345Steering angle sender G85Four-wheel drive control unit J492Entry and start authorisation control unit J518ECD control unit (electronically controlled damping) J250Park assist steering control unit J791Electrical steering column lock control unit J764Power steering control unit J500Headlight assist control unit J844Vehicle tracking system interface control unit J843ABS control unit J104Cornering light and headlight range control unit J745Reversing camera control unit J772Electromechanical park and handbrake control unit J540Key: Powertrain CAN bus Convenience CAN bus Extended CAN bus Infotainment CAN bus Diagnostics CAN bus Dash panel insert CAN bus LIN bus Sub-bus systems50Sliding sunroof control unit J245Sunroof roller blind control unit J394Radio RMMI display J685Front camera for driver assistance systems R242Audi side assist control unit J769Battery monitor control unit J367Audi side assist control unit 2 J770Alternator CVoltage stabilizer J532Headlight power module, left J667Headlight power module, right J668602_09151Models with MOST busAlarm horn H12Wiper motor control unit J400Anti-theft alarm sensor G578Rain and light detector sensor G397Humidity sensor G355 Control unit in dash panel insert J285Onboard power supply control unit J519Diagnostic portMultifunction steering wheel control unit J453Steering column electronics control unit J527 Data bus diagnostic interface J533 Climatronic control unit J255 Engine control unit J623 Twin clutch gearbox mechatronics J743Door control unit, rear left J388Door control unit, driver sid