TECHNICAL DOCUMENTATION

SSP 603 Audi A6 Avant ’12

PDFEN60 pages7 MB
SSP 603 Audi A6 Avant ’12 - PDF cover

This PDF is currently unavailable.

Read document text
Self Study Programme 603 For internal use onlyAudi A6 Avant '12Audi Service Training Avant is the name on the best estates! That slogan, originally created for the A4 Avant, is more than just a tag line for Audi. We are driven by the ambition to combine modern technology with outstanding ease of use and distinctive design with versatile adaptability. The Audi A6 Avant '12 meets the most exacting demand. With a wealth of innovative technical highlights, the Audi A6 Avant '12 occupies the leading position in its sector and offers owners the ultimate in safety, functionality and driver experience. In addition, a weight saving of around 15 % has been achieved in the bodywork of the Audi A6 Avant '12 in order to reduce CO2 emissions without sacrificing driver experience, safety or comfort. That saving results from the use of aluminium composite construction instead of conventional steel construction. Aluminium composite construction results in greater agility, more driving pleasure, greater comfort and increased efficiency. The Audi A6 Avant '12 offers a large variety of modern systems from bodywork to electronic aids and conveniences that have been combined into a coherent unit with the typical Audi precision and attention to detail, as illustrated by the following aspects. Powertrain: Higher performance combined with more economical consumption compared with the previous model or S tronic – innovative double-clutch seven-speed transmission.Safety: New safety concept with Audi pre sense. Suspension and steering: Audi drive select including efficiency mode or dynamic steering. Driver assistance systems: Audi adaptive cruise control with Stop&Go function including pre sense front, parking assistance with surrounding area display and reversing camera or head-up display. Air conditioning: Automatic climate control with 4 zones or comfort seat with air conditioning and massage functions. Electronic aids and conveniences: Virtual pedal or electric load space cover. Lighting systems: Modulating headlight beam height adjustment or full LED headlights. Information and entertainment: Bang & Olufsen Advanced Sound System with ultra-efficient speaker technology or Bluetooth online car phone. It is clear just from that brief outline of the Audi A6 Avant '12 technology that this new model will be a major challenge for the Service Department. Mastering the technology and, in so doing, delighting our customers is the aim for all of us. So enjoy working through this self-study programme and getting to know the Audi A6 Avant '12.603_0692 ContentsIntroductionIn brief _______________________________________________________________________________________________________________________________________________________ 4BodyOverview _____________________________________________________________________________________________________________________________________________________ 6Occupant protectionOverview _____________________________________________________________________________________________________________________________________________________ 8 Components _________________________________________________________________________________________________________________________________________________ 9EnginesPetrol engines ______________________________________________________________________________________________________________________________________________ 10 Diesel engines ______________________________________________________________________________________________________________________________________________ 14 Exhaust system on vehicles with 3.0l V6 TDI Biturbo engine __________________________________________________________________________________________ 20 Engine/gearbox combinations ____________________________________________________________________________________________________________________________ 22Power transmissionOverview ____________________________________________________________________________________________________________________________________________________ 24 8-speed automatic transmission 0BK ____________________________________________________________________________________________________________________ 26ChassisOverview ____________________________________________________________________________________________________________________________________________________ 30Electrical systemControl units ________________________________________________________________________________________________________________________________________________ 32 Virtual pedal ________________________________________________________________________________________________________________________________________________ 34 Exterior lighting ____________________________________________________________________________________________________________________________________________ 38 Topology ____________________________________________________________________________________________________________________________________________________ 40Air conditioningOverview ____________________________________________________________________________________________________________________________________________________ 42 efficiency mode _____________________________________________________________________________________________________________________________________________ 42 Auxiliary heater and ventilation __________________________________________________________________________________________________________________________ 43InfotainmentOverview of versions _______________________________________________________________________________________________________________________________________ 44 Installation locations of the control units _______________________________________________________________________________________________________________ 46 Radio Media Center (RMC) ________________________________________________________________________________________________________________________________ 47 MMI Navigation plus _______________________________________________________________________________________________________________________________________ 49 Audi online traffic information (in some parts of Europe) _____________________________________________________________________________________________ 50 Google online search using voice interactive system (Europe only) ___________________________________________________________________________________ 53 Access to mobile phone address book when Bluetooth car phone is active __________________________________________________________________________ 54 Sound systems _____________________________________________________________________________________________________________________________________________ 55 Aerials overview ____________________________________________________________________________________________________________________________________________ 56ServiceInspection and maintenance ______________________________________________________________________________________________________________________________ 58AppendixSelf-study programmes ___________________________________________________________________________________________________________________________________ 59The self-study programme describes the fundamentals of the design and function of new vehicle models, new automotive components or new technologies. It is not a repair manual! Any figures quoted merely serve the purpose of facilitating understanding and relate to the version of data valid at the time the SSP was produced. For details of servicing and repair operations, it is imperative that you refer to the latest technical literature.!NoteReference3 IntroductionIn brief8831461410311627 1874603_1011618 2086603_102104 619857029122912 49261102603_1041) 2) 3) 4)Maximum headroom Shoulder room Elbow room Including roof aerial, the vehicle height is 1482 mm.All dimensions quoted in millimetres. 4632 1966 15273 14602 14913 14292 1181 1050603_105Length in mm Width in mm Height in mm Track, front in mm Track, rear in mm Wheelbase in mm Trailer load in kg with brake and a gradient of 8 % Kerb weight in kg Permissible gross weight in kg4926 2086 1482 1627 1618 2912 1700 / 19002) 3) 1)Interior width, front in mm Interior width, rear in mm Headroom, front in mm Headroom, rear in mm Clear loading width in mm Load space lip height in mm Load space volume in l Tank capacity in l Drag coefficient cw1527 1491 1046 985 1050 632 565 / 16804) 65 / 755) 0.3016302) / 17903) 22602) / 24203)Height excluding roof aerial 1461 mm 2.0l TFSI multitronic 3) 3.0l TDI S-tronic quattro 4) With rear seat folded down 5) Optional1) 2)5 BodyOverviewThe body of the Audi A6 Avant '12 is based on the same platform as the Audi A7 Sportback and the Audi A6 '11, which use the composite construction method. The composite construction method uses high-strength sheet steel in combination with cast aluminium components. Similarly, all attached components such as wings, bonnet, doors, tailgate, strut tower brace and front and rear bumper crossmembers are made of aluminium.Body structureUltra-high strength, hot-formed components are used in the • Front side member reinforcement • Bulkhead (tunnel arch) • A-pillar • B-pillar • Sill panel • Front seat cross-member • Tunnel reinforcing • Rear side-member areas.Legend: Mild steels High-strength steels Modern high-strength steels Ultra-high-strength steels6Ultra-high-strength steels (hot-formed) Sheet aluminium components Cast aluminium components Extruded aluminium sections 603_063Reference More information on the suspension strut mountings, B-pillars and chassis side-members can be found in Self-study Programme 478, "Audi A7 Sportback".7 Occupant protectionOverviewThe occupant safety system on the Audi A6 Avant '12 is comparable with that on the Audi A7 Sportback and Audi A6 '11 in terms of equipment and function. Obviously, the individual components have been adapted to the circumstances in the Audi A6 Avant '12. More detailed information on the occupant safety system and its components can be found in Self-study Programmes 484, "Audi A7 Sportback Occupant Safety, Information & Entertainment, Air Conditioning" and 486 "Audi A6 '11". The graphic shown in this section is an illustrative example provided as an aid to understanding.Additional equipmentThe vehicle can optionally be equipped with rear side airbags and/ or a keyswitch for deactivating the front passenger airbag with accompanying warning lamp. Due to the varying demands and legal requirements on car manufacturers across the markets, the equipment fitted may vary.Reference More detailed information on the occupant safety system and its components can be found in Self-study Programmes 484, "Audi A7 Sportback Occupant Safety, Information & Entertainment, Air Conditioning" and 486 "Audi A6 '11".8 ComponentsThe occupant safety system in the Audi A6 Avant '12 is made up of the following components and systems: • • • • • • • Airbag control unit Adaptive driver and front passenger airbags Front side airbags Head airbags Crash sensors for front airbag Crash sensors in the doors for side impact detection Crash sensors in the C-pillars for side impact detection • Front inertia-reel seat belts with pyrotechnic belt tensioners and active belt force limiters • Battery terminal disconnector • Seat belt warning for all seats • Seat belt switches on all seats • Seat occupancy detector in front passenger seat • Seat position detectors for driver and front passenger603_0489 EnginesPetrol enginesThe 2.0l TFSI engineTechnical features • Charging by exhaust turbocharger • Start-stop system and recuperation • Four-valve cylinder head with a camshaft phaser on the intake side and Audi Valvelift System on the exhaust side • Adapted belt drive (minus the power steering pump) • Engine management by timing chain • Intake manifold with flaps • Volume-controlled oil pump • Improved high-pressure injectors603_002Reference For more information on the design and function of the 2.0l TFSI engine, refer to Self-study Programme 436, "Changes to the 4-cylinder TFSI Engine with Chain-driven Valvegear".10 Specifications Torque-power curvePower in kW Torque in NmEngine speed [rpm]603_003Engine code Type Displacement in cm3CDNB Four-cylinder inline engine 1984 132 (180) at 4,000 - 6,000 320 at 1,500 - 3,900 4 82.5 92.8 9.6 : 1 • Front wheel drive • multitronic with front wheel drive Bosch MED 17.1 Premium unleaded (sulphur-free) 95 RON EU V 149 (front wheel drive)Power output in kW (bhp) at rpm Torque in Nm at rpm Number of valves per cylinder Bore in mm Stroke in mm Compression ratio Powertrain type Engine management Fuel Emissions standard CO2 emission in g/km11 3.0l V6 TFSI engineTechnical features • Charging by Roots blower • Thermal management with active coolant pump • Start-stop system and recuperation • Mixed friction can occur during restarts due to the start-stop function so the bearing bushes are coated with an additional wear-resistant layer • Friction-reduced chain gear with: • modified camshafts • reduced-leakage camshaft positioner • Dual-stage volume-controlled oil pump • Chain tensioners designed for reduced oil flow • Structure-honed cylinders to reduce oil consumption and wear • Reduced prestress on the third piston ring land • Adapted belt drive (minus the power steering pump) • Flow-enhanced high pressure injectors • Reduced valve spring forces2.8l V6 FSI engineTechnical features • Thermal management with active coolant pump • Start-stop system and recuperation • Mixed friction can occur during restarts due to the start-stop function so the bearing bushes are coated with an additional wear-resistant layer • Friction-reduced chain gear with: • modified camshafts • reduced-leakage camshaft positioner • Dual-stage volume-controlled oil pump • Chain tensioners designed for reduced oil flow • Structure-honed cylinders to reduce oil consumption and wear • Reduced prestress on the third piston ring land • Adapted belt drive (minus the power steering pump) • Flow-enhanced high pressure injectors603_004603_005Reference For more information on the design and function of the 3.0l V6 TFSI engine, refer to Self-study Programme 437, "Audi 3.0l V6 TFS Engine with Roots Supercharger" and on the 2.8l V6 FSI engine in Self-study Programme 411, "Audi 2.8l and 3.2l V6 FSI Engine with Audi Valvelift System".12 Specifications Torque-power curve3.0l V6 TFSI engine with engine code CGWB Power in kW Torque in Nm2.8l V6 TFSI engine with engine code CHVA Power in kW Torque in NmEngine speed [rpm]603_006Engine speed [rpm]603_007Engine code Type Displacement in cm3 Power output in kW (bhp) at rpm Torque in Nm at rpm Number of valves per cylinder Bore in mm Stroke in mm Compression ratio Powertrain typeCGWB Six cylinder V engine with 90° V angle 2995 220 (300) at 5,250 - 6,500 440 at 2,900 - 4,500 4 84.5 89 10.5 : 1 S tronic quattroCHVA Six cylinder V engine with 90° V angle 2773 150 (204) at 5,250 - 6,500 280 at 3,000 - 5,000 4 84.5 82.4 12 : 1 • Front wheel drive • multitronic with front wheel drive • S tronic quattro Simos 8.1 Premium unleaded (sulphur-free) 95 RON EU V 187Engine management Fuel Emissions standard CO2 emission in g/kmSimos 8 Premium unleaded (sulphur-free) 95 RON EU V 19013 Diesel engines2.0l TDI engineTechnical features • Common-rail fuel injection with turbocharger • Electromagnetic injectors • Engine management by timing chain • Injection system with injection pressures of up to 1800 bar • Two balancer shafts • Start-stop system and recuperation • Adapted belt drive (minus the power steering pump) • 4-port 2-way valve in cooling system • Electrical exhaust gas recirculation valve • Low temperature EGR cooling • Particulate filter with separate, integrated oxidising catalytic converter603_008Reference For more information on the design and function of the 2.0l TDI engine, refer to Self-study Programme 420, "The 2.0l TDI Engine with Common-rail Injection System" and Self-study Programme 442, "The 1.6l TDI Engine with Common-rail Injection System".14 Specifications Torque-power curvePower in kW Torque in NmEngine speed [rpm]603_009Engine code Type Displacement in cm3CGLC Four-cylinder inline engine 1968 130 (177) at 4200 380 at 1,750 - 2,500 4 81.0 95.5 16.5 : 1 • Front wheel drive • multitronic with front wheel drive Bosch EDC 17 CR Diesel to EN 590 1800 EU V 129Power output in kW (bhp) at rpm Torque in Nm at rpm Number of valves per cylinder Bore in mm Stroke in mm Compression ratio Powertrain type Engine management Fuel Maximum injection pressure in bar Emissions standard CO2 emission in g/km15 3.0l V6 TDI engine (2nd generation)Technical features • Common-rail fuel injection with turbocharger • Dual-flow superposed intake manifold with only one central swirl flap in lieu of the previous six swirl flaps • Piezoelectric injection system with injection pressures up to 2000 bar • Dual-piston high pressure pump (CP4.2) • High pressure fuel pump driven by auxiliaries chain • Chain drive reduced from four to two simplex chains • Advanced particulate filter regeneration with three postinjections and aluminium titanate as new diesel particulate filter substrate • Oil circuit with dual-stage flow controlled vane cell pump • Cooling system in the form of cylinder head and cylinder block coolant circulation system • Compact, modular-design exhaust recirculation (EGR valve, EGR cooler and bypass valve integrated in module) • Active EGR cooler without thermostat control and auxiliary coolant pump603_010Reference For more information on the design and function of the 3.0l V6 TDI engine, refer to Self-study Programme 479, "Audi 3.0l V6 TDI Engine (2nd Generation)".16 Specifications Torque-power curveEngine with code CLAB Power in kW Torque in NmEngine with code CDUC Engine with code CLAA Power in kW Power in kW Torque in Nm Torque in NmEngine speed [rpm]603_011Engine speed [rpm]603_012Engine code Type Displacement in cm3CDUC Six cylinder V engine with 90° V angle 2967 180 (245) at 4,000 - 4,500CLAB, CLAA Six cylinder V engine with 90° V angle 2967 150 (204) at 3,750 - 4,500 (front-wheel drive) 150 (204) at 3,250 - 4,500 (quattro) 400 at 1,250 - 3,500 (front-wheel drive) 450 at 1,250 - 3,000 (quattro) 4 83 91.4 16.8 : 1 • Front wheel drive • multitronic with front wheel drive • S tronic quattro Bosch EDC 17 Diesel to EN 590 2000 EU V 137 (front wheel drive) 149 (quattro)17Power output in kW (bhp) at rpmTorque in Nm at rpm Number of valves per cylinder Bore in mm Stroke in mm Compression ratio Powertrain type500 at 1,400 - 3,250 4 83 91.4 16.8 : 1 S tronic quattroEngine management Fuel Maximum injection pressure in bar Emissions standard CO2 emission in g/kmBosch EDC 17 Diesel to EN 590 1800 EU V 158 3.0l V6 TDI Biturbo engineTechnical features • Common-rail fuel injection with turbocharger • Dual-flow superposed intake manifold with only one central swirl flap in lieu of the previous six swirl flaps • Piezo-electric injection system with injection pressure of 2000 bar • Dual-piston high pressure pump (CP4.2) with high delivery volume • High pressure fuel pump driven by auxiliaries chain • Chain drive reduced from four to two simplex chains • Two-stage turbocharger system • Oil circulation system with two-stage controlled-flow vane pump with large delivery volume and flange-mounted vacuum pump • Cooling system with split circuits for cylinder head and cylinder block • Compact, modular-design exhaust recirculation (EGR valve, switchable EGR cooler and bypass valve integrated in module) • Advanced particulate filter regeneration with up to five postinjection phases and aluminium titanate as diesel particulate filter substrate603_013Reference For more information on the design and function of the 3.0l V6 TDI Biturbo engine, refer to Self-study Programme 604, "Audi 3.0l V6 TDI Biturbo Engine".18 Specifications Torque-power curvePower in kW Torque in NmEngine speed [rpm]603_014Engine code Type Displacement in cm3CGQB Six cylinder V engine with 90° V angle 2967 230 at 4250 650 at 1,500 - 2,750 4 90 1–4–3–6–2–5 83 91.4 16.0 : 1 Bosch CRS 3.3 Diesel to EN 590 2000 EU V 169Power output in kW at rpm Torque in Nm at rpm Number of valves per cylinder Cylinder separation in mm Firing order Bore in mm Stroke in mm Compression ratio Engine management Fuel Maximum injection pressure in bar Emissions standard CO2 emission in g/km19 Exhaust system on vehicles with 3.0l V6 TDI Biturbo engineOxygen sensor G39Exhaust gas temperature sender 2 G448Exhaust gas temperature sender 1 G235Exhaust gas temperature sender 3 G495Differential pressure sensor G505Exhaust temperature sensor 4 for cylinder bank 2, G649Oxidising catalytic converterSound actuatorThe sound actuator system consists of a signal generator, a signal amplifier and an exciter1). Stored on the structural vibration control unit J869 there are various sound files which can be played and transmitted to the exciter according to vehicle model and operating data (engine speed and load, vehicle speed). The exciter generates the structure borne noise. That is then carried into the passenger compartment through the bodywork and the windscreen. The exciter is fitted centrally to the base of the windscreen by means of a special fixing; it is the system's "tuning fork". Different models and engines require different excitation to create a balanced engine note. The information about the engine fitted and the body type is read from the CAN data bus (Powertrain CAN). The structural vibration control unit J869 automatically detects in which vehicle it is fitted. Cutaway view of exciter1)Threaded mounting bolt Diesel particulate filterExhaust gas temperature sender 4 G6481)An exciter, also called a structural vibration converter or bodyshaker, is basically a speaker without a speaker cone. That function is performed by the windscreen, which directs the sound into the vehicle interior. It consists essentially of three components: the vibrating mass, the socket for electrical connection to the structural vibration control unit J869, and the mounting bolt for fixing it to the mounting surface.Electrical connectionVibrating mass603_086Reference More information on the sound actuator system can be found in Self-study Programme 491, "Audi 1.4l TFSI Engine with Twin Turbochargers".20 Active-sound exhaust systemThe active-sound exhaust system comprises an exhaust system with attached speaker housings, an engine noise generation control unit, J493, and the actuators R257 and R258 that are operated by the control unit. The control unit receives vehicle data (engine speed, engine load, vehicle model, road speed) from the CAN bus (Powertrain CAN). The actuators generate sound waves according to the data-map based control unit commands. The sound module is formed by additional speaker housings on the main silencers, which connect directly to the tailpipes. The signal generator, which is fitted in the engine noise generation control unit J943, produces a range of vibrations dependent on the engine operating mode. That signal spectrum is amplified into a power signal by the engine noise generation control unit J943 and converted into sound waves by the actuator. The active sound system is capable of generating certain frequencies (engine harmonics) in order to produce a desired sound pattern (sound design). In contrast with conventional exhaust systems with passive silencers, the exhaust sound can be adapted to the vehicle and the driving situation via Audi drive select.603_100Powertrain CANEngine noise generation actuator 2, R258603_001Main silencerEngine noise generation actuator 1, R257!Note On vehicles with an active-sound exhaust system, the tailpipes must not be sealed over to test for leaks or be pressurised with compressed air as doing so could destroy the speaker diaphragms.21 Engine/gearbox combinationsPetrol engines2.0l R4 TFSI engine0B10AW2.8l V6 FSI engine0B10AW0B53.0l V6 TFSI engineGearbox designations:0B1 0B5 0BK 0AW 6-speed manual gearbox 7-speed double-clutch transmission – S tronic 8-speed automatic transmission multitronic0B522 Diesel engines2.0l R4 TDI engine0B10AW3.0l V6 TDI engine (2nd generation)0B10AW0B53.0l V6 TDI Biturbo engine0BK23 Power transmissionOverviewThe Audi A6 Avant '12 is another model in the C7 series on which the power transmission concept with the forward-shifted differential from the B8 series is used. Other features of the concept are the method of connecting the prop shaft to the gearbox and the rear differential and various weight-saving measures (see reference below). Dynamic handling is assisted by independently selective wheel torque control. Information on this can be found in SSP 478 and the Audi iTV programme "Audi RS5 Power Transmission Part 2" of 23/09/2010. The automatic transmissions are incorporated in the engine's innovative temperature management system. It controls the ATF operating temperature and thus increases its efficiency. For information on the innovative temperature management system, please refer to SSP 486. With the automatic transmissions, use of the navigation system's predictive route data is possible, see SSP 457.603_089multitronic 0AWmultitronic 0AW is available for vehicles with front-wheel drive. A sports program and a tiptronic mode with eight fixed transmission ratios provide for a sports-style driving experience. These can be changed with the paddles on the steering wheel or with the selector lever. The start-stop system is supported as standard. The clutch pressure supply system, the hydraulic control unit and the gearbox software have been optimised for this purpose. The 0AW multitronic gearbox will be combined with the following engines: • 2.0l R4 TFSI engine • 2.0l R4 TDI engine • 2.8l V6 FSI engine • 3.0l V6 TDI engineRear-axle transmissionStandard: Rear axle differential 0BC Optional: Rear axle drive 0BF with sport differential for: • 3.0l V6 TFSI engine • 3.0l V6 TDI engine More information on the 0BF sports differential can be found in the iTV tutorial "Audi quattro with Sports Differential" Parts 1, 2, 3 and 4, and in SSP 476 "Rear Differential 0BF/0BE Sports Differential."Reference The power transmission concept used on the B8 series (Type 8K/8T/8F) was carried over to the C7 series (Type 4G-) on introduction of the Audi A7 Sportback. Information on this can be found in SSP 392 and 409 and the Audi iTV programme "Audi A5 Power Transmission Part " of 23/02/2010. Information on the "socket-mount prop shaft" can be found in SSP 478 and the Audi iTV programme "Audi A8 Power Transmission Part 2" of 02/09/2010. That information also applies to the Audi A6 Avant '12 and forms the basic knowledge on those topics.24 S tronic 7-speed double-clutch transmission 0B5The 7-speed double-clutch gearbox was first introduced in 2008 on the Audi Q8. This is explained in detail in SSP 429. The gearbox used on the Audi A6 Avant '12 is the same as the one on the version of the Audi A7 Sportback described in SSP 478. The startstop system is now supported as standard. The software has been optimised for that purpose. The 0B5 S tronic 7-speed manual gearbox is paired with the following engines: • 2.8l V6 FSI engine • 3.0l V6 TFSI engine • 3.0l V6 TDI engine603_090603_091603_0928-speed automatic transmission 0BKThe 0BK 8-speed automatic transmission is used in combination with engines that are capable of delivering torque levels over 550 Nm. The start-stop system is supported by means of a hydraulic pressure accumulator. Details of it can be obtained from SSP 457. The 0BK 8-speed automatic transmission is used together with the following engine: • 3.0l V6 TDI Biturbo engine6-speed manual gearbox 0B1The 0B1 six-peed manual gearbox is used with engines with a torque rating of up to 400 Nm. The start-stop system is supported as standard. The gear detection sensor G604 that the system requires is described in SSP 486 "Audi A6 '11". The 6-speed manual gearbox 0B1 is combined with the following engines: • 2.0l R4 TFSI engine • 2.0l R4 TDI engine • 2.8l V6 FSI engine • 3.0l V6 TDI engine25 8-speed automatic transmission 0BKThe 0BK transmission has been familiar since the launch of the Audi A8 '10 (Series D4) and is described in SSP 457. In the C7 series it is used in combination with the engines with a maximum torque of over 550 Nm. One difference from the Audi A8 '10 is that the gearbox is not operated using the "shift by wire" technology. The selector lever positions are communicated to the transmission by conventional means using a selector cable. That operates the gear sensor G676 via the shift lever, the gearshift actuator and, by purely mechanical means, the parking lock.Selector lever cableShift lever603_094Selector mechanismThe selector mechanism on the Audi A6 Avant '12 is largely the same as that used from model year 2006 on the Audi A6 '05. The same mechanism can also be found on the Audi A4, Audi A5 and Audi Q5 from model year 2008 and on the Audi A7 Sportback. A detailed description can be found in SSP 409 starting on page 34. There is a difference from the selector mechanism described in SSP 409 in terms of the operating logic. Changing transmission mode from D to S (or from S to D) is effected by pressing the selector lever backwards once from the position D/S. Afterwards, the selector lever always springs back to the position D/S. This operating logic is identical to that on the Audi A6 '11 and the Audi A7 Sportback. When the lever is pressed backwards from position D/S, the selector lever sensor J587 sends the sports-mode toggle signal to the transmission control unit. In response, the system switches to sports mode or back to normal drive mode D, see Figure 603_097.603_093 26 Selector lever sensor J587Pin assignment for connector C Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 Terminal 31 LEDs +/– LED P LED R LED N LED D/S ---Terminal 58d ------Selector lever position display unit Y26Pin assignment for connector BB2 B1B4 B3603_096P signal for ignition key withdrawal lock to central comfort/convenience system control unit J393P/R/N/D/S signal from transmission control unit tiptronic and sports-mode toggle signal to transmission control unitP/N signal for selector lever lock from transmission control unit J217603_095More information on the selector lever sensor J587 can be obtained from Self-study Programme 367 starting on page 66.DSO1) traces of signals from selector lever sensor J587Testing equipment: • V.A.G 1598/54 • V.A.G 1598/42 • Vehicle diagnostic tester with DSO1)P/R/N/D/STesting conditions: • "Ignition on" DSO1) connection: • Black tester probe on Pin 62) • Red tester probe on Pin 32)Sports-mode toggle Signal output only as long as selector lever is pulled backwards.tiptronic gatetiptronic upshiftSignal output only as long as selector lever is held in tiptronic upshift/downshift position. tiptronic downshift1) 2)603_097Digital memory oscilloscope Pin on tester adaptor V.A.G 1598/4227 Mechatronics (E26/4)The mechatronic technology (E26/4) is extensively explained by the description of the mechatronics (E26/6) in Self-study Programme 457 "Audi A8 '10 Power Transmission". The use of a selector lever cable instead of the "shift by wire" technology involves the following changes: • The parking lock is operated by the selector lever cable. • Solenoid valve N88 has no function within the mechatronic system. • Selector lever positions P, R, N and D are detected by the gear sensor G676. • The gearshift actuator controls the hydraulic pressure to the hydraulic valves and ensures the neutral position.Gearshift actuator Gear sensor G676View of undersideConnection for ATF vacuum filter (to ATF pump)N88 N443 N371 N217 N233Wiring loom – connection to electronic moduleN216 N218Legend: N88 Solenoid valve 1 (not operated; serves only as shut-off ) N215 Pressure regulating valve 1 (EDS-A) N216 Pressure regulating valve 2 (EDS-B) N217 Pressure regulating valve 3 (EDS-C) N218 Pressure regulating valve 4 (EDS-D) N233 Pressure regulating valve 5 (EDS-E) N371 Pressure regulating valve 6 (EDS-WK) N443 Pressure regulating valve 7 (EDS-Sys)28N215Transmission output speed sensor G195 Gear sensor G676The sensor is part off the electronic module and is operated by the shift lever. A magnet in the sensor's sliding block switches four Hall-effect sensors (A/B/C/D) according to the selector lever position. The signals from the Hall-effect sensors are analysed and thus provide the transmission control unit with information about selector lever positions P, R, N and D. Changing from D to S or S to D is signalled to the transmission control unit by the selector lever sensor J587, see page 27.Sliding blockGearshift actuator The gearshift actuator is operated by the shift lever. In transmission modes R, D and S it controls the hydraulic pressure to the valves and depressurisation in transmission modes N and P.Shift lever603_098View from aboveTransmission input speed sensor G182 Pressure connection from ATF pump Automatic transmission control unit J217 Electronic moduleVacuum connection to ATF pumpConnector to vehicleGear sensor G676Transmission output speed sensor G195603_099!Note When fitting the mechatronic unit, it is essential to ensure that the shift lever engages properly in the slots of the sliding block and the gearshift actuator, see Figure 603_098.29 ChassisOverviewThe Audi A6 Avant '12 suspension and steering is essentially the same as on the A6 saloon, see also Self-study Programme 486 "Audi A6 '11". That also applies to the suspension variations and their trim settings. Adaptive air suspension is also offered as an option on the Audi A6 Avant '12. The procedure for wheel alignment testing and adjustment and the adjustment points provided for doing so are the same as on the Audi A4 '08, A7 Sportback and A8 '10.Five-link front suspension1)Electromechanical steering) Servotronic function as basic equipment9th generation ESP Premium1) from BOSCHAdaptive cruise control (ACC)1) as optional extraMechanically adjustable steering column1) as basic equipment Electrically adjustable steering column1) as an option Dynamic steering1) as an option1)Design and function same as fitted on Audi A6 '11 (saloon) and A7 Sportback.30 Sensor electronics control unit J8491) Brakes1) in versions for 16"/17" wheels dependent on engine optionElectromechanical parking brake (EPB)1)Wheel/tyre choices as for Audi A6 '11 (saloon) − 16"/17" tyres as basic equipment − 17" - 20" as option with "Tyre Mobility System" (TMS) and optional temporary spare wheelTrapezium link rear suspension1)Four-spoke multifunction steering wheel1) as basic equipment Three-spoke multifunction steering wheel1) as an option in various versionsAdaptive air suspension1) optional603_08731 Electrical systemControl unitsThe A6 Avant '12 goes into series production in autumn 2011 as a further model in the C7 series. The electrical system within the C7 series is identical, i.e. information about it can be found in Self-study Programmes 481, 482, 483 and 486. Differences from the A7 Sportback and the A6 '11 are described in this SSP. The Audi A6 Avant '12 introduces several control units that are also carried over to the A7 Sportback and A6 '11 models. Those control units are listed below with a short description. For more information on the individual control units, please refer to the relevant sections/relevant SSPs.Tailgate control unit J938Summary Designation Installation position Tasks Tailgate control unit J938 In rear bumper trim Analysing capacitive sensor signals Implementing the virtual pedal function and communicating with the central comfort/convenience systems control unit J393 LIN slave of central control unit for comfort/convenience systems, J393 None. Readings and diagnosis via central comfort/convenience systems control unit J393 In this SSP starting on page 36.Bus device Diagnostic address603_106Detailed informationStructural vibration control unit J869Summary Designation Installation position Tasks Structural vibration control unit J869 In the cowl panel Generating engine noise in vehicle interior using structural vibration actuator R214 Bus device on Powertrain CAN A9 In SSP 491 "Audi 1.4l TFSI Engine with Twin Turbochargers".603_107Bus device Diagnostic address Detailed information32 Engine noise control unit J943Summary Designation Installation position Tasks Engine noise control unit J943 At the back of the boot on the right Generating a sports-style sound from the exhaust system using actuators R257 and R258 on the rear silencers Bus device on Powertrain CAN C0 In this SSP starting on page 21.603_108Bus device Diagnostic address Detailed informationReduction agent metering system control unit J880Summary Designation Installation position Tasks Bus device Diagnostic address Detailed information Reduction agent metering system control unit J880 On the active tank Controlling reducing agent injection to minimise nitrogen oxide emissions Bus device on Powertrain CAN AC In SSP 428 "3.0 V6 TDI Engine with Ultra Low Emission System".Active tank with pump for reduction agent metering systemReduction agent metering system control unit J880603_109Electrohydraulic engine mounting control unit J247Summary Designation Installation position Tasks Electrohydraulic engine mounting control unit J247 Under front right wing Controlling the active engine mountings to reduce engine vibration, especially during the cylinder shut-down phase Device on Extended CAN bus BA System first introduced on eight-cylinder engine; more detailed description of system in relevant SSP.603_110Bus device Diagnostic address Detailed information33 Virtual pedalIntroductionThe Audi A6 Avant '12 is the first Audi model to offer the new "virtual pedal" function. The virtual pedal enables automatic opening of the tailgate without having to touch a control on the vehicle or take the vehicle key out of your pocket. Automatic opening of the tailgate is initiated by a kicking action with your foot under the rear bumper. The virtual pedal represents a substantial gain in user convenience, for example if someone wants to open the tailgate when their hands are full with shopping bags. The A6 Avant '12 is automatically equipped with the virtual pedal if the following optional equipment is fitted: • Advanced key and • Electrically operated tailgate The optional Advanced Key is required to identify an authorised vehicle key after the kicking action is performed. The key must be within the area surrounding the tailgate. The electrically operated tailgate option ensures that the tailgate opens fully after the kicking action is performed.Electrical design and componentsTo identify a kicking action, two electrodes are fitted in the rear bumper trim. They work as capacitive sensors. The two electrodes are connected to the tailgate opening control unit J938. The control unit J938 is a LIN slave of the comfort/ convenience systems control unit J393.Terminal 30Terminal 30Electrode 2 Comfort/convenience system control unit J393 LIN bus Tailgate opening control unit J938Electrode 1ERoad Direction of travel603_064!34Note The "virtual pedal" function is also referred to as "gesture-controlled tailgate opening". Components and locationsThe individual components for the "virtual pedal" system are located in the rear bumper. The tailgate opening control unit J938 is clipped into a holder that is screwed to the bumper.Tailgate opening control unit J938Rear bumperLead to comfort/ convenience systems control unit J393Fixing rail for lower electrode on bumperUpper electrodeLower electrode603_06735 Detection of kicking action using two electrodesThe kicking action off the foot is detected by two capacitive sensors the signals from which are read by the tailgate opening control unit J938. The tailgate opening control unit continuously measures the capacitance of the two sensors. A capacitive sensor is a capacitor, which is a component consisting of two capacitor plates. In this case, each of the sensor electrodes forms one capacitor plate. The ground on which the vehicle is standing forms the second capacitor plate. When the capacitor is charged, there is an electrical field between the two plates. The capacitance of a capacitor depends substantially on the medium that is between the two capacitor plates. In electrical engineering, that medium is called the dielectric. In the case of the virtual pedal, the medium concerned is air. If someone moves their foot between the two capacitor plates, the medium between the plates changes and, consequently, the capacitance of the capacitor. That change in capacitance is detected by the tailgate opening control unit J938 by continuous measurement. Someone moving their foot under the bumper firstly causes the capacitance of the first capacitive sensor (Electrode 1) to increase. Then the capacitance of the second capacitive sensor (Electrode 2) increases as well. As soon as the person withdraws his/her foot, the capacitance of the second sensor drops back to its original level. The same then happens with capacitive sensor 1. The kicking action must be fit within a specified time frame. The time frame is used to distinguish the kicking action of a foot from other motion sequences. If the kicking action is performed too slowly or too quickly, the system will not initiate a scan for a vehicle key and the tailgate will not be opened.Terminal 30Tailgate opening control unit J938Electrode 2Electrode 1Capacitive sensor 2Capacitive sensor 1Road Direction of travel603_065!36Note The precondition for opening the tailgate by means of a kicking action is that the ignition is switched off. Tailgate opening sequence using the virtual pedalR137R138R200R201R47Comfort/convenience system control unit J393LIN busTailgate opening control unit J938Electrode 2Electrode 1Convenience CAN V120 Rear lid control unit J605603_066V444V445Legend: J393 Comfort/convenience system control unit J605 Tailgate control unit J938 Tailgate opening control unit R47 Central locking aerial R137 Luggage compartment aerial for access and start authorisation R138 Interior aerial 1 for access and start authorisationR200 R201 V120 V444 V445Left aerial for access and start authorisation Right aerial for access and start authorisation Tailgate lock motor Tailgate motor 1 Tailgate motor 2The sequence is described for an Audi A6 Avant '12. The vehicle's ignition is switched off and the tailgate is closed. 1. A kicking action is performed below the rear bumper. 2. The tailgate opening control unit J938 detects the kicking action by means of its two electrodes and sends the information to the comfort/convenience systems control unit J393. 3. The comfort/convenience systems control unit starts a key scan using its keyless aerials. 4. The vehicle key receives the signals from the various aerials and sends a message to the comfort/convenience systems control unit J393. 5. Control unit J393 receives the message via the central locking aerial R47. 6. Control unit J393 analyses the message and detects that there is an authorised key in the vicinity of the vehicle rear. 7. Control unit J393 operates the motor V120 for unlocking and opening the tailgate. 8. Control unit J393 sends a CAN message instructing the tailgate control unit J605 to open the tailgate. 9. Control unit J605 operates its two electric motors V444 and V445 and opens the tailgate.37 Exterior lightingHeadlightOn the Audi A6 Avant '12, the same headlight options are offered as on the Audi A6 '11. • Halogen headlights • Bi-xenon headlights • LED headlights Information on the headlights, the light functions and headlight beam height adjustment can be found in SSP 486, Audi A6 '11.603_073Tail lightsThe tail light clusters on the Audi A6 Avant '12 basically come in two versions. • Basic tail light cluster • LED tail light cluster They are made up of two parts on each side of the vehicle. One half of the light cluster is incorporated in the side panel and the other half in the tailgate.Basic tail light cluster The three 21-watt bulbs in the top section of the tail light clusters are used for the tail lights and the brake lights on the Audi A6 Avant '12. That distinguishes the A6 Avant '12 from the A6 '11 on which only one 21-watt bulb (in the side-panel light) was used for the brake light. When the rear fog light is on, the centre bulb on the Audi A6 Avant '12 is only used for the tail light function.Tail/brake light (P21W)Tail/brake light (P21W)Tail/brake light Rear fog light (P21W)Reflector603_072Turn signal (PY21W)ReflectorReversing light (W16W)38 LED tail light cluster The LED taillight clusters on the A6 Avant '12 are very similar to those on the A6 '11. All functions are implemented by means of LED technology. The only exception is the reversing light (one 16-watt bulb on each side of the vehicle). On the A6 Avant '12, those 16-watt bulbs are housed in the tailgate lights. By comparison: On the A6 '11, the reversing light and the rear fog light comprise one bulb each on each side of the vehicle and the reversing light is housed in the side panel lights. The tail light clusters are operated by the central comfort/convenience systems control unit J393. LEDs or electronics of the tail lights cannot be replaced. Only the 16-watt bulbs can be replaced.Turn signalReversing light (W16W)Rear fog lightBrake lightBrake lightReflectorTail lightReflector603_071High-level brake lightThe third brake light is integrated in the rear spoiler, assists brake light function by means of 18 LEDs and is controlled by the central comfort/convenience systems control unit J393. Individual components of the third brake light cannot be replaced. If it fails, the item must be replaced as a complete unit, which requires removal of the rear spoiler.603_074Number plate lightWith the launch of the A6 Avant '12, the number plate lights with 5-watt bulbs have been discontinued and replaced by a number plate light that uses LED technology. It is now fitted on all C7 series models regardless of tail-light version. The two number plate lights are clipped into the tailgate panel, each have two LEDs, and, like the taillights, are operated by the central comfort/convenience systems control unit J393.603_07539 TopologyFront right seat vent control unit J799Wiper motor control unit J400Front left seat vent control unit J800Air humidity sender Air quality sensor in fresh air intake G238 duct G657Rain and light detector sensor G397Refrigerant pressure/temperature sender G395Power modules for left LED headlightMulti-function steering wheel control unit J453Light switch E1Garage door opening control unit J530Power modules for right LED headlightElectrically adjustable steering column control unit J866 Garage door operating unit E284Vehicle elec. system control unit J519Seat and steering column adjustment control unit with memory function, J136 Seat adjustment control unit with memory, front passenger J521Flap control servomotors 1 – 16Sliding sunroof control unit J245Fresh air blower control unit J126Anti-theft alarm sensor G578Roof electronics control unit J528Air humidity sender G355Roof roller blind control unit J394Trailer detection control unit J345Vehicle locating system interface control unit J843 Seat occupancy detection control unit1) J706 Selector lever sensors control unit J587 Door control unit, driver side J386Alarm horn H12Convenience system central control unit J393Rear lid control unit J605Electrical steering column lock control unit J764 Immobiliser reader coil D2Door control unit, rear left J388Door control unit, rear right J389Door control unit, front passenger side J387 Special vehicle control unit J608Front passenger side multi-contour seat control unit J873 Multi-contour seat control unit, front passenger side J872Tailgate control unit J938Taxi alarm remote control, control unit J601Legend: Powertrain CAN Convenience CAN Extended CAN bus1)Display and operation CAN Diagnostics CAN FlexRayMOST bus LIN bus Sub-bus systemsOnly specific markets40 Windscreen projection system control unit J898 Steering column electronics control unit J527 Surrounding area control unit J928 Rear vent servomotorsTV tuner R78 Rear air conditioner/Climatronic operating and display unit E265 Control unit in dash panel insert J285 Radio RAudi parking system control unit J791Climatronic control unit J255Auxiliary heater control unit J364DVD auto changer R161Digital sound package control unit J525Diagnostic port Auxiliary heating radio controlled receiver R64 Data bus diagnostic interface J533 Electronic information systems control unit 1 J794 MMI display J685Airbag control unit J234All-wheel drive control unit J492Electrohydraulic engine mounting control unit J247 Headlight assist control unit J844Battery monitoring control unit J367Twin clutch gearbox mechatronics J743ABS control unit J104Alternator CEngine control unit J623Sensor electronics control unit J849Camera control unit J852Voltage stabiliser J532Steering angle sender G85ACC control unit J428Front left belt pretensioner control unit J854 Front right belt pretensioner control unit J855 Audi side assist control unit J769Control unit for cornering headlights and beam-height adjustment J745Electromechanical park and handbrake control unit J540 Active steering control unit J792ACC control unit 2 J850Power module for left headlight J667Power module for right headlight J668Image processing control unit J851Night vision system control unit J853Structural vibration control unit J869Adaptive suspension control unit J197Audi side assist control unit 2 J770Night vision system camera R212Engine noise generation control unit J943Power steering control unit J500Reduction agent metering system control unit J880 603_070 41 Air conditioningOverviewThe air conditioning systems on the Audi A6 Avant '12 heat, cool and dehumidify the air in the vehicle interior. They are based on the air conditioning systems on the Audi A6 '11. The Audi A6 Avant '12 is offered with two different air conditioning systems – automatic climate control and enhanced automatic climate control.Automatic climate controlEnhanced automatic climate control603_082603_083603_084Equipment and technical details of automatic climate control • • • • • • • Two climate control zones Key recognition for fan setting and air distribution Automatic mode Manual air recirculation mode Rear window heater Seat heating (option) A/C modesEquipment and technical details of enhanced automatic climate control • • • • • • • • • • • Four climate control zones Two A/C control panels Full key recognition Automatic mode Automatic air recirculation Rear window heater Seat heating with three settings (option) Seat ventilation with three settings (option) A/C modes Residual heat function Synchronisation of all four climate control zonesA/C modesThe power of the air flow can be set to gentle/"eco", "medium" and "intensive". The "eco" setting sets the automatic climate control to an economy-orientated mode. In efficiency driving mode, the A/C mode "eco" is automatically selected. However, it is possible to manually deselect "eco" mode when efficiency mode is active. For example, the customer can switch to A/C mode "medium". When doing so, all other efficiency settings remain active. AC mode Suppl. heaterCarecoAir conditioningmedium intensiveSystemsSet indiv.603_085efficiency modeOn the Audi A6 Avant '12, the customer can select efficiency mode via Audi drive select on the MMI. That sets the air conditioning system to an operating mode optimised for economical fuel consumption and the A/C mode "eco" is automatically activated. When A/C mode "eco" is activated, the air conditioning system switches to a range optimised for low-energy consumption within temperature thresholds that are acceptable for the vehicle occupants. The air conditioning system operates at reduced output. Within the temperature limits of approx. –5 °C to +20 °C, the system attempts to achieve the interior temperature desired by the vehicle occupant without resorting to the supplementary heater or with the supplementary heater at reduced output, or as the case may be, at reduced compressor output or with the compressor switched off altogether.42 Effects of AC settings when efficiency mode is activatedTemperatureStandard settings at low temperatures • Supplementary heater activated • Compressor inactive • Stop & Go system has limitations due to air conditioning system A/C mode "eco" • Supplementary heater may be inactive • Compressor may be inactive • Stop & Go system has more extensive limitations due to air conditioning system (longer stop phases) Standard settings at high temperatures • Supplementary heater deactivated • Compressor active • Stop & Go system has limitations due to air conditioning systemAuxiliary heater and ventilationThe auxiliary heater/ventilation heats and ventilates the vehicle interior and can be switched on when the engine is switched off as well as when the vehicle is being driven. The auxiliary heater is made by Eberspächer and is based on the Eberspächer Hydronic II model. The same auxiliary heater is used on various Audi models such as the Audi A8 '10 and the B8 series (e.g. Audi A4 '08).Setting optionsOption 1: Switching on/off immediately The auxiliary heater/ventilation can be switched on/off immediately. The vehicle switches the auxiliary heater or ventilation on depending on the ambient temperature and the temperature setting. Option 2: Setting the timer The remote control can be used to set a timer and so program a time by which the vehicle is to have reached the desired temperature. The remote control can only be used to program Timer 1. The system decides when to switch on the auxiliary heater or ventilation based on the set temperature and the ambient temperature. Three different timers can be activated via the MMI.Fault messagesIn the event of a fault, various fault symbols may be displayed when the remote control is switched on. Symbol Meaning There is a system fault on the auxiliary heater. The fault can be localised and rectified by an Audi service agent. The auxiliary heater cannot be switched on because there is insufficient fuel. The auxiliary heater cannot be switched on because the charge level of the vehicle battery is too low. The vehicle is outside the range of the remote control.603_081Display area for fault symbols.!Note Despite the auxiliary heaters being identical, a remote control for an Audi A6 Avant '12 cannot be taught to work with an Audi A4 '08 auxiliary heater. Nor is the reverse possible.43 InfotainmentOverview of versionsThere is a wide choice of innovative multimedia solutions available on the Audi A6 Avant '12. Buyers can choose between two radio systems and two navigation systems. From a technical viewpoint, two information and entertainment systems are once again used on the Audi A6 Avant '12: The Radio Media Center (RMC) and the MMI 3rd Generation plus (MMI 3G Plus). The MMI systems radio, radio plus and navigation are based on the Radio Media Center (RMC) basic information/ entertainment system. The MMI Navigation plus is part of the MMI 3G plus, which first appeared on the Audi A8 '10. The following table shows the main equipment features and optional equipment. MMI Radio (Europe only) MMI Radio plusBasic equipment 6.5" TFT colour display with 400 x 240 pixels Remote control panel with 6 station keys6.5" TFT colour displaRemote control paneDriver information syAM/FM radio with phase diversityAM/FM radio with phDigital satellite radio Canada only) TP memo (while driving) CD drive (MP3, WMA, AAC)TP memo (while driviCD drive (MP3, WMA Two SD card readersAUX In (not applicab Basic sound system (4 x 20 watts)Audi sound system (1Bluetooth interface (Speech dialogue syst OptionsUniversal mobile phoAudi music interface Reference More information on the MMI Navigation plus can be found in the Self-study Programmes 456 "Audi A8 '10" and 484 "Audi A7 Sportback Passenger Safety, Information, Entertainment and Climate Control".Digital radio (DAB/DA CD changer (MP3)BOSE Surround Soun!44Driver information sy instrument cluster Note In countries in which Bluetooth is not approved, there are no functions that use it available on Audi vehicles.Provision for Rear Sea MMI NavigationMMI Navigation plusay with 400 x 240 pixels6.5" TFT colour display with 400 x 240 pixels Remote control panel with 6 station keys Driver information system with monochrome screen 2D navigation system with SD card AM/FM radio with phase diversity Digital satellite radio SDARS (available in USA and Canada only) TP memo (while driving) CD drive (MP3, WMA, AAC) Two SD card readers8.0" TFT colour display with 800 x 480 pixels MMI touch Driver information system with 7" colour screen in instrument cluster 3D hard drive navigation system AM/FM radio with phase diversity and background tuner Digital satellite radio SDARS (available in USA and Canada only) TP memo DVD drive (audio/video, MP3, AAC, WMA, MPEG4) Two SD card readers Jukebox with approx. 20 GB of memoryel with 6 station keysystem with monochrome screenhase diversityo SDARS (available in USA anding) , AAC)le to AMI)AUX In (not applicable to AMI) Audi sound system (180 watts) Bluetooth interface (9ZX) Speech dialogue systemAUX In (not applicable to AMI) Audi sound system (180 watts) Bluetooth interface (9ZX) Premium speech dialogue system180 watts)(9ZX)temone prewiring (9ZF)Universal mobile phone prewiring (9ZF)Universal mobile phone prewiring (9ZF) Bluetooth car phone BTA (BTA online inc. online services and WLAN hotspot dependent on market) Handset for BTAAudi music interface Digital radio (DAB/DAB+/DMB) CD changer (MP3)Audi music interface Digital radio (DAB/DAB+/DMB) CD changer (MP3) DVD auto changerAB+/DMB)dBOSE Surround SoundBOSE Surround Sound Bang & Olufsen Advanced Sound Systemystem with 7" colour screen inDriver information system with 7" colour screen in instrument cluster TV tuner Provision for Rear Seat Entertainment (9WQ) Provision for Rear Seat Entertainment (9WQ)at Entertainment (9WQ)45 Installation locations of the control unitsThe information/entertainment control units are fitted in various locations on the Audi A6 Avant '12. The following graphic shows all possible control units that can be fitted on the Audi A6 Avant '12 with MMI Navigation plus.Display unit for display and control panel control unit, front information (MMI display) J685Control panel for multimedia system E380Digital sound package control unit J525CD auto changer / DVD auto changer R41/R161603_057Electronic information systems control unit 1 J794Digital sound package control unit 2 J787Radio control unit (not with RMC) RTV tuner (not with RMC) R7846 Radio Media Center (RMC)MMI Radio (RMC)The MMI radio on the Audi A6 Avant '12 is part of the Radio Media Center (RMC) information/entertainment platform. In design and function it is identical with the unit on the Audi A7 Sportback. The MMI Radio on the Audi A6 Avant '12 has the following features:Front panel of J794 for MMI Radio603_018• 6.5" colour screen with 400 x 240 pixels • Offset control panel with six user-programmable station buttons • A radio twin tuner with FM phase diversity and an AM single tuner for medium wave (MW) and long wave (LW) in Europe • A single CD drive • An integrated amplifier providing 4 x 20 watts • Car menuAM/FM1FM2DisplayMOST bus603_025Front panel of J794 for MMI RadioMMI Radio plus (RMC)Compared to MMI Radio, MMI Radio plus has the following different and/or additional features: • Two SD card readers (SDHC up to 32 GB) • Integrated 6-channel amplifier for Audi Sound providing 180 watts • Bluetooth interface for HFP and A2DP • Speech dialogue system • Driver information system with monochrome screen in instrument cluster • Digital satellite radio (USA and Canada only) • AUX-In on centre console • Possibility for additional equipment such as DAB, etc.Front panel of J794 for MMI Radio plus603_020DABAM/FM1FM2DisplayAMIMOST bus603_026Back panel of J794 for MMI Radio plusReference More information on the Radio Media Center can be obtained from Self-study Programme 477 "Audi A1".47 MMI Navigation (RMC)The information/entertainment system MMI Navigation offers the navigation function in addition to the MMI Radio functions. The navigation map data is stored on an SD card. For Europe, for example, it is an 8-GB SDHC card. Navigation is only possible with the map data SD card inserted. The navigation system has a two-dimensional map display. It can also show the map in bird's-eye view. To do so, the setting must be changed to 3D map. Other highlights of the navigation system include manoeuvre lists and detailed intersection maps. The information is shown on the display using the split-screen method.Front panel of J794 for MMI Navigation603_020NavigationVoice interactive system (RMC)The voice interactive system supports various languages. In order to set the desired language a separate language CD was required in the past with the Radio Media Center. It had to be inserted in the electronic information systems control unit 1, J794, in order to upload the language data. To simplify that process, the current RMC electronic information systems control unit 1, J794, has a larger internal memory. It already has the languages for the relevant sales region stored on it. Changing the language now takes place automatically after the relevant MMI menu option is selected and applies to the display language and the voice interactive system. Different languages are stored according to sales region. The following languages are supported in the North America region, for example: • English • French • SpanishDABAM/FM1FM2DisplayAMIMOST bus603_027Back panel of J794 for MMI Navigation!Note The MMI must be set to the normal language for the country during the hand-over service.New features of RMC DAB radio tunerThe function "digital radio tuner" offered with RMC systems now supports the following standards: • DAB • DAB+ • DAB+DMB Audio (Digital Multimedia Broadcasting) DAB+ and DMB Audio are extended versions of the DAB standard. These technologies enable the transmission of more radio stations with supplementary data (e.g. traffic information) due to greater audio compression compared with DAB. Therefore, DAB+ and DMB Audio enable more radio stations/station components within a channel (ensemble) and thus more efficient use of resources.MemoryDAB radioBandDAB (digital radio) FM (very high frequency) MW (medium wave) LW (long wave)Functions Menu option on RMC with DABSetting603_02848 MMI Navigation plusThe MMI Navigation plus is the same as the system on the Audi A8 '10 and Audi A7 Sportback. It is the MMI 3rd generation plus (MMI 3G Plus). The system is distinguished by the following features: • • • • • • • • • • • 60 GB hard drive with approx. 20 GB for Jukebox 3D navigation system with 3D city plans DVD drive Two SD card readers (SDHC cards up to 32 GB) Premium speech dialogue system Radio control unit with phase diversity Six-channel amplifier (integrated in radio control unit) 8-inch TFT screen with 800 x 480 pixels MMI touch Audi music interface (optional) Bluetooth interface for • hands-free set • audio streaming • Digital satellite radio tuner (USA and Canada only)Front panel of J794 for MMI Navigation plus603_024TelephoneNavigationAMI DisplayFBASMOST bus603_029Back panel of J794 for MMI Navigation plusNew features of MMI Navigation plus with web-enabled Bluetooth car phoneAudi online traffic information (in some parts of Europe) With the MMI Navigation plus with the optional web-enabled Bluetooth car phone, not only does the navigation map show traffic information but on many roads the actual current traffic flow is also indicated. That makes computing the route and arrival time more reliable. Google online search using voice interactive system (some parts of Europe) The voice interactive system of the MMI Navigation plus with web-enabled Bluetooth car phone has been extended by an additional input facility. Using the voice command "Online destinations" it is now possible to search for any destination without taking your hands off the steering wheel. This is an extension of the input facility for the existing online destination search that currently uses Google on the internet. Access to mobile phone address book when Bluetooth car phone is active When using the Bluetooth car phone, the phone numbers from the SIM card inserted1) can still be used. A new addition is the ability to use the address book of a mobile phone connected via Bluetooth. Thus the user can use all the contacts on his/her mobile phone without it having to support the