TECHNICAL DOCUMENTATION
SSP 081 Bluetooth in SKODA cars

This PDF is currently unavailable.
Read document text
ServiceBluetooth in Škoda vehicles81Service TrainingProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Who does not know about the Vikings? The warriors baptised amidst the storm sailed their warships across the open sea. With the invasion of England, they held the old world in suspense for about 250 years as of the year 793 AD. However, what does this have to do with the modern Bluetooth communication? Nevertheless, such a connection exists, as the name is a small homage to the Viking ruler Harald I Bluetooth Gormson by the developer of the Bluetooth software. This Viking ruler accelerated the Danish and later the Norwegian Christianisation and the unification of the north. He was considered a very communicative person. This technology was developped in Sweden by the company Ericsson and other interest groups in the year 1998. The designation (blue tooth - engl. Bluetooth) emphasises the high proportion of Scandinavian companies involved in the development of the Bluetooth technology (commonly abbreviated as BT).Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP81_012GBContentBasic informationApplication, development and future of Bluetooth Bluetooth function5 6 7Hardware componentsHow to recognise devices that are prepared for the Bluetooth communication? Bluetooth profiles Bluetooth mobile radio telephones provided by Škoda Mobile radio telephone preinstallation UHV control unit Holders for mobile radio telephones Antenna concept Škoda radios and navigation systems with Bluetooth support10 10 10 13 14 15 18 19 20Telephone preinstallation High +/GSM II Telephone preinstallation Premium/GSM III21 24Possibilities of the mobile phone operationOperation by means of the dash panel insert Operation by means of the multi-function steering wheel Operation by means of the radio or navigation system Voice control of the mobile phone27 27 27 28 28Note: Bluetooth is a registered trademark of the company Ericsson.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB3ContentNetworking between Bluetooth devicesActivation of the Bluetooth interface (interface) on the mobile radio telephone Visibility of the devices for the networking process Visibility of the mobile radio telephone preinstallation UHV Low GSM II - up to 52/08 - only Škoda Superb Visibility of the mobile radio telephone preinstallation GSM III and GSM II as of 52/0829 29 30 31 32First connection via BluetoothConnection to the mobile phone preinstallation "High +" Connection to the mobile phone preinstallation "Premium"33 33 36Acoustic systems, interruption of the connectionAdditional Bluetooth audio communication systems Interruption of the Bluetooth connection39 39 39ServiceTips for customers Notes - ServiceProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�40 40 41 42Scheme of the service procedureDefining dictionary44Notes46You will find the notes for the assembly and disassembly, repair, diagnostics as well as detailed user information in the workshop manuals, the diagnostic unit VAS 505x and in the onboard literature. The time for going to press was on the 12/2009. This brochure is not subject to an update.4GBBasic informationPersonal computer (PC), mobile radio telephone when driving. Considering the existence of many different (mobile phone), personal digital assistant (PDA), MP3 player, headset (headphone speaker set), types of plug connections and interfaces among different manufacturers, it seems appropriate to digital camera or iPod - more and more digital devices are with us every day in our ordinary choose a standardised wireless connection for lives. connecting these devices. The communication using Bluetooth technology, They always keep us in touch, are meant to entertain us and assist us in organising our daily which was developped for industrial use in the 90s of the last century, has prevailed as a shortschedule. They are also increasingly incorporated in the range radio link because of its high versatility and robustness. Such regional networks also carry interior electronics of the vehicles. It is necessary to integrate them systematically the designation WPAN (Wireless Personal Area in the vehicles so that they can be operated using Network). the existing control elements in the vehicle, such as the multi-function steering wheel, the central display and the operating module of the radio. This is the only way to prevent the risk of the Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability driver being distracted by operating these deviceswith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP81_02GB5Basic informationApplication of the Bluetooth technologyThe Bluetooth technology enables to receive and send wireless voice and data information using the 2.4 GHz frequency band between two or more electrical systems, e.g. mobile radio telephones, PDAs, PCs, etc. Another typical application of the Bluetooth technology is the combination of the PC with wireless entry systems such as the mouse and the keyboard. An additional element that enjoys great popularity is the ability to establish a connection with two different phones (one for business activities, the other for personal use) at the same time.Development of the Bluetooth technologyThe BT version 1.0 had a lot of errors and demonstrated unthoughtfulness when it was presented for the first time; the shift towards real use only came about with the version 1.1 (in addition to the corrections, it contained in particular the support for non-cryptic transfers as well as the display of the signal strength. Subsequently, the AFH support (Adaptive Frequency-Hopped Spread Spectrum) was implemented in the version 1.2, it improved the co-existence of BT with WiFi (BT allows for adaptive frequency hopping to avoid channels which it considers impaired and occupied by WiFi in that specific location), however it did not significantly increase the transmission speed yet allowed the retransmissions of corrupted packets for synchronous (audio) transfers, thus ensuring a higher resistance to interference. In addition to many more useful features in the backdrop, the benefit of the version 2.0 is in particular the three-fold increase in the actual transmission speed (up to 2.1 Mbit/s).Future of the Bluetooth technologyBluetooth Core Specification Version 3.0 High Speed. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� This version will be introduced in the near future. Compared to the current version it is much faster and is able to use wireless WiFi networks. The highest transmission speed was set to 24 Mbit/s. In practice, lower values are achieved. At present, this is a major achievement compared to the Bluetooth version 2.1 which offers at the most 3 Mbit/s. Thus, the new Bluetooth version may also be used for the transfer of large multimedia data such as music and films. The first devices with support for Bluetooth 3.0 will arrive on the market no later than within one year.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted6GBBluetooth functionmicrowave spectrum with 12 ISM frequency rangesfrequency range ISM2, 402GHz up to 2.483 GHzSClBThe frequency range used by the Bluetooth technology is located in one of the twelve parts of the microwave spectrum, which was made available for free use. We refer to these twelve parts as the ISM band (Industrial Scientific and Medical). No authorisation and no radio license is required for their use. The Bluetooth technology uses the ISM band with a frequency range from 2.402 to 2.483 GHz for its operations.microwave oven, WLAN, radio remote control, Bluetoothoverall spectrum of electromagnetic wavesSP81_03The resistance of the Bluetooth data connection to disruptive electromagnetic interferences output of the data is based on the frequency-hopping method packet from device 1 (Frequency Hopping). The principle of this method (FHSS) is based on 1600 hops (frequency change) per second between 79 frequencies at an interval of 1 MHz. This mechanism should increase the resistance of the connection to an interference using the frequencysame frequency. hopping in the In this case, the devices reciprocally determine ISM band in advance which channels to use for the transProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted mission of A. data and in what sequence. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�reception of the data packet of device 2SP81_04Unless the entire ISM bandwidth is disrupted, the impact of the interference on the data transmission is minor as it is only unfavourable for a fraction of a second because of the constant frequency change.GB7Basic informationBluetooth supports both the point-to-point communication as well as the multipoint communication. A transmitter acts as a control unit (master) and can simultaneously operate up to 7 sub-systems (slave). These networks are also known as the so-called piconets.Master Slave Available positionSP81_06Systems within a piconet use two types of transmission modes. SCO - (Synchronous Connection Oriented) data protocol which is used forProtected the voice transmissiby copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA on. It is a synchronous transmission with a AUTO dataA. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� speed of up to 64 kbit/s. An asynchronous transmission is used (ACL - Asynchronous Connectionless) for the transmission of other data (e.g. audio data). The data is divided into data packets and after they have been received, they are re-assembled into one whole data packet and transferred after the recording.SP81_07Voice8GBA Bluetooth enabled device can participate in multiple piconets, however it can never be a master of more than one network. It is technically possible to reciprocally connect up to eleven piconets. This is called a diffuse network (scatternet). This function has not yet been standardised, therefore it is currently not used in the automotive industry.Master Slave Available positionSP81_08Only one channel is created at a time to allow the communication of the master device with one of the slave devices via this channel at a specified time.There are several performance levels defined (100 mW, 10 mW, 2.5 mW-Class 1-3), which enable the communication up to a distance of approx. 10 - 100 metres. The values mentioned above only apply in an open space. If obstacles are present between the communicating systems 10 Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability (for example walls are typical obstacles), with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.the � range decreases rapidly. In most cases there is no sudden loss of connection, but the number of data packets which are incorrectly transmitted gradually increases. Bluetooth piconets have a high degree of protection against eavesdropping and unauthorised access to your device.Passkey=???SP81_09The transmission power of 1 mW (Class III) limits the range to approx. ten metres, implying a possible eavesdropper must be within this range. Furthermore, he would have to know the Bluetooth address of one of the connected alien devices. When establishing the connection, it is also required to enter a passkey which is only visible for the direct user.GB9Hardware componentsHow to recognise devices that are prepared for the Bluetooth communication?Bluetooth is a name protected by law, which also has its own graphic symbol. In most cases, the manufacturers of mobile radio telephones, PDA devices or consumer electronics use this symbol on their devices to point to the compatibility of their products with the Bluetooth communication protocol.SP81_11 SP81_10Bluetooth logoIdentification of the phone holderBluetooth profilesAlthough the Bluetooth communication has deve- ces which in turn make the functions available for lopped and continues to evolve, the communicause. tion ability of Bluetooth itself does not guarantee The table below shows which profiles must be a hundred percent that the device can actually supported by the mobile radio telephone so that be connected to the mobile phone preinstallation. it can be operated by means of the universal Even if this connection succeeds, not all the func- mobile phone preinstallation (UHV) "Low/GSM tions may be available. II" (up to 52/08), "High+/GSM II" or "Premium/ To achieve aby successful connection, the Bluetooprofiles mentioned under "optional" Protected copyright. Copying for private or commercial purposes, in part orGSM in whole,III". is not The permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability th device must support for example the mobile extend the scope of functions of the mobile radio with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� radio telephone as well as the software profiles telephone, for example those functions which can which control the data transmission between the be operated using the control elements of the Bluetooth device and the actual connected devivehicle. UHV Profile HFP rSAP A2DP PBAP Low/GSM II (up to High +/GSM II Premium/GSM III 52/08) required optional required optional required optionalSP81_2910GBPBAP (Phone Book Access Profile) The PBAP profile allows to dial and use the individual phone numbers or the phonebooks stored in the mobile radio telephone. The individual entries will therefore be transferred as an electronic business card (vCard). The data format of the business card is "vcf" (vCard file) and is used by many email programmes, and organisers (planners).CAN data busSP81_12A2DP (Advanced Audio Distribution Profile) When using this profile, music can be transmitted in stereo over an audio channel, e.g. from the MP3 player to the loudspeakers of the vehicle and precisely in this direction (one-way transmission) by means of the music player of the mobile radio telephone and the universal mobile phone preinstallation.CAN data busSP81_13Sometimes it is necessary, depending on the manufacturer, to activate the data protocol or also the used profiles by means of the menu of the device. The respective user manuals of the manufacturer will inform you about this.Depending on the type of device, the current profiles can be installed at a later stage if necessary. Please observe the instructions of the manufacturer of the system.GBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�11Hardware componentsHFP (Handsfree Profile) Possible communication support with wireless sets according to the designation. Most commonly used on road trips. The mobile radio telephone uses its GSM module and the internal antenna to connect to the mobile network.control unit for operating the mobile radio telephonemobile radio telephoneSP81_14DUN (Dial-Up-Network Profile) This profile offers a dial-up connection via Bluetooth. It is most commonly used for connecting to notebooks which in turn establish a connection to the Internet by way of the mobile radio telephone.control unit for operating the mobile radio telephoneNotebookSP81_15rSAP (Repote-SIM Access Profile) The profile enables the reading of the SIM card content of the mobile radio telephone. The unit comprises the (including Protected by GSM copyright.module Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability the SIM card), which takes over the function of with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� the MRT after the connection has been established with the MRT. Afterwards it disconnects itself from the mobile network. HSP (Headset Profile) Profile with communication support using the headset. See fig.control unit for operating the mobile radio telephonemobile radio telephoneSP81_16After disconnecting the MRT from the UHV, no update of the calling list is performed in the MRT.12GBBluetooth mobile radio telephones provided by ŠkodaNokia 3109 mobile radio telephone with Bluetooth Nokia 3109 is currently one of the mobile radio telephones with Bluetooth support available from the range of Škoda accessories. Technical characteristics (abbreviated) • Tri-band mobile radio telephone (possibility of operation via GSM 900, GSM 1800, GSM 1900) All the information con128 x 160 pixel color display integrated Explorer for the mobile access to the Internet integrated music player among other things for the formats such as MP3, MIDI, AAC, WMA integrated video player for the formats such as MP4, H.263 and H.264 approximately 8.5 MB of internal memory for the user data memory of up to 2 GB with Micro SD memory cardtained in this study program concerning the operation, such as connecting the Bluetooth devices, refers solely to this mobile radio telephone.• ••••SP81_17•Other mobile radio telephones with Bluetooth from the range of Škoda accessoriese.g.:• • •by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted NokiaProtected 6300/Nokia 6500 classic unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability Nokia 6021 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Sony Ericsson W890iThe complete list of the mobile radio telephones Nokia 6300/6500 which are supported can be found on the websiclassic tes of Škoda Auto.SP81_18Nokia 6021SP81_19Sony Ericsson W890iSP81_20Make sure that all the devices to be connected using the Bluetooth interface, such as the mobile phone preinstallation (UHV), the mobile radio telephone and the headset are mutually compatible. Detailed information can be found in the range of Škoda accessories.GB13Hardware componentsMobile radio telephone preinstallationSkoda currently offers two types of mobile radio telephone preinstallations (UHV): • • "UHV High +" "UHV Premium" The communication of the mobile radio telephone with the electronics of the vehicle is performed via the control unit for the operating electronics of the mobile radio telephone. If all the Bluetooth devices involved support the necessary profiles, these devices can be controlled with restriction according to the circumstances, using the control elements of the vehicle depending on the equipment or by means of the radio or the radio and the navigation of the vehicle. In this context, with restriction means that not all of the menus and settings of the connected Bluetooth devices can be operated by means of the control elements of the vehicle if necessary.The fundamental difference between the two sets is that one device in the piconet acts as a master, ensuring the connection with the other (sub) devices within the network. When using the mobile phone preinstallation "High +", the connection is mediated by the mobile radio telephone. This means that the phone searches for the mobile phone preinstallation and establishes a connection. The master device is also the mobile radio telephone. When using the mobile phone preinstallation "Premium", the control unit searches for the mobile radio telephone to be connected or other Bluetooth devices. This means that the control unit ensures the connection procedure and thus it is the main system in the piconet of the vehicle. Individual components of the mobile radio telephone preinstallation (UHV): • • • • control unit for the operating electronics of the mobile radio telephone base plate device holder and universal connection adapter antenna system of the phoneCharging the batteries of the Bluetooth devices using the on-board power supply of the vehicle can only be performed, for example, for a Bluetooth mobile phone if the phone is docked in the holder.A more detailed overview of all possible combinations of devices and mobile radio telephone holders can be found on the websites of the company ŠkodaAuto (www. skoda-auto.cz).14GB Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�UHV control unitThe UHV control unit memorises the last three connected mobile radio telephones and the respective SIM cards (called "mobile phone SIM card combination"). If two different SIM cards are inserted in one phone, this is called a dual SIM card mobile phone just as if two identical SIM cards are inserted in two different phones. If a combination of four SIM cards is connected to the phone, this replaces the combination which was connected to the UHV unit for the shortest period of time. This means that the UHV unit easily assists a combination of three SIM cards for a mobile phone, however when using four or more combinations, the first connection (set-up) must be repeated. WARNING! Only valid for UHV GSM II The type of connection also plays a role. If a mobile phone SIM card combination is connected once via the BluetoothTM interface and another time via the adapter cable, the UHV unit recognises it as two different mobile radio telephones.There are no mobile phone holders supplied for the mobile radio telephone preinstallation Premium/ GSM III.SP81_21The omnidirectional microphone is located in the ceiling light of the vehicle. The difference in volume between the driver seat and the front passenger seat is negligible.When connecting the mobile radio telephone to the UHV unit for the first time, the phonebook is downloaded, the course can be followed on the dash panel insert. When connecting it repeatedly, the downloading is performed "in the backdrop". If differences "in the backdrop" are noticed between the directories in the phone and the UHV unit, the information contained in the UHV unit is updated after completing the downloading.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB15Hardware componentsDevelopment of the UHV control unitsThe only control unit, which included the A2DP function, is the unit "UHV Low BT Audio", which was only installed in the model Superb (from 13/08 to 52/08). Now this function must be a component of the control units with the estimated date of commissioning being 22/10.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�16GBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP81_28GB17Hardware componentsAdapter holders for mobile radio telephonesCurrently, there are two types of adapters for the holder of the mobile radio telephone. The new adapters are marked with the symbol for the BluetoothTM interface and the superscript "Bluetooth only". The adapters with this identification are only used for charging the phone, the actual communication between the phone and the UHV unit is processed via the BluetoothTM interface just as for the telephone preinstallation without adapter. This type of adapter is fitted with a button, the PTT button (push to talk), in order to activate the voice control, if necessary with an SOS button as a second button, which does not function however in combination with the UHV unit "High +".Different types of phone holders The older type of adapter has only one button – PTT and has no identification "Bluetooth only". This means that the adapter assists the charging of the phone, however it does not assist the communication via the BluetoothTM interface. If the phone is placed in this type of adapter, a possible communication via the Bluetooth interface between the phone and the UHV unit can be interrupted and is only processed via the cable line of the adapter. The most striking consequence of communication via the cable is the loss of support of the character set UTF-8, this means that diacritical characters in the contact information are replaced by spaces.Holder with the identification Bluetooth onlyHolder only for the communication via cableThere are no mobile phone holders supplied for the mobile radio telephone preinstallation Premium/ GSM III.SP81_22Both types of adapters described have an antenna input for the phone. If the phone is in the adapter, then the external antenna on the roof of the vehicle is used when phoning. Thus, the harmful radiation of the mobile radio telephone is reduced inside the vehicle and the quality of the incoming and outgoing calls is improved.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�18GBAntenna conceptThe antenna is used as an element that captures and amplifies the desired signals in the respective frequency range. Because each service is sent on a different frequency, there are several modules required for the reception of each range. For this reason, each frequency range (service offered) requires a separate antenna. The GSM antenna is integrated in the roof antenna. The radio signals are received via the individual antenna modules. These signals are transmitted from the antenna to the final device via a coaxial cable. The GSM antenna is a passive and bidirectional antenna (it also serves as a transmitting antenna). When using the UHV unit Low/High+/GSM II, the HFP Bluetooth profile (Handsfree Profile) is used. If you do not use an adapter for the mobile radio telephone, the antenna integrated in your phone is used. Otherwise the external Tri-band antenna on the roof of your vehicle, which is connected to the adapter of the mobile radio telephone, is used.SP81_23Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permittedSP81_24unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability When using the UHV unit III,Copyright the rSAP Bluetooth with respect to the correctness of Premium/GSM information in this document. by ŠKODA AUTO A. S.�profile (remote SIM Access Profile) is used. This profile allows you to read your SIM card while the control unit which contains the GSM module with the other SIM card, takes over the function of your mobile radio telephone. This means that your mobile radio telephone then disconnects from the mobile network, while the reception and sending of the signal is further ensured by the UHV unit which is connected to the external Tri-band antenna.There are no mobile phone holders supplied for the mobile radio telephone preinstallation Premium/ GSM III.SP81_25GB19Hardware componentsŠkoda radios and navigation systems with Bluetooth supportTelephone preinstallation High +/GSM II (valid for both development versions) This telephone preinstallation is supplied with all the radios and navigation systems currently on offer from Škoda Auto.Telephone preinstallation Premium/GSM III The telephone preinstallation Premium/GSM III is only supplied with the radio navigation systems COLUMBUS (RNS 510 – MID), AMUNDSEN ( RNS 310 – LOW) and a model of the radio BOLERO (RCD 510 – MID).Radio navigation system ColumbusRadio BoleroProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Radio navigation system AmundsenRadio SwingSP81_2720GBTelephone preinstallation GSM IITelephone preinstallation High +/GSM IIThe Škoda vehicles can be equipped with a telephone preinstallation, which carries the designation GSM ll. This telephone preinstallation is the basis of the hands-free systems with BluetoothTM technology that are offered in the Škoda vehicles. The BluetoothTM technology is based on the fact that all data transmissions between the control unit for operating the mobile radio telephone and the mobile radio telephone, possibly the multimedia system, are only performed using wireless communication. Function of the telephone preinstallation GSM II: • • • • • The operation on the mobile radio telephone, the combination device as well as the radio/navigation is possible with the support of the BAP protocol. Possibility of switching over to "mute" mode (sound suppression). The PTT button, which is located in the bottom part of the phone adapter on the left, is used to activate the voice control. The SOS button, which is located in the bottom part of the phone adapter on the right, does not function in combination with the UHV unit "High +". Possibility of operation using the optional button "mobile phone" on the right of the multi-function steering wheel - e.g accepting and terminating a call etc. (the function for the selected button "mobile phone" changes depending on the operating mode of the phone; detailed information regarding the functions of the selection button "mobile phone" can be found in the user manual of the vehicle).The telephone preinstallation GSM II comes in two versions: • • without holder for mobile radio telephone with holder for mobile radio telephoneProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Telephone preinstallation without adapter for the mobile radio telephone holderThe telephone preinstallation without holder only permits the communication between the mobile radio telephone and the UHV device via the BluetoothTM data interface. Therefore, neither the adapter for the holder of the mobile radio telephone nor the external antenna on the roof of the vehicle is a component of this preinstallation. The communication via the BluetoothTM interface is processed via the hands-free system profile (HFP - version 1.5 and 1.0). The UHV unit additionally assists the profile for the downloading of the phonebook PBAP (Phone Book Access Profile), it is an alternative to downloading the phonebook via HFP. The contact names in the phone will be transferred via the set of characters UTF-8, therefore, for example cyrillic characters of the Russian alphabet, sinographs of the Chinese alphabet or Czech diacritics are displayed on the dash panel insert. The telephone preinstallation without adapter for the mobile radio telephone holder can be installed in vehicles with left and right-hand drive.GB21Telephone preinstallation GSM IITelephone preinstallation with mobile phone holderThe telephone preinstallation with adapter enables the connection of the mobile radio telephone to the UHV unit via the BluetoothTM interface and at the same time the phone can be placed in the adapter. The adapter is fixed to the instrument panel using a console so that the driver can follow the display of the phone as well as operate it if necessary.The adapter ensures the following functions: • • • • charging the phone connection of the mobile radio telephone to the external antenna of the phone diagnostics of the external antenna of the phone operating certain functions of the mobile radio telephone by means of the PTT button on this adapter (the SOS button does not function with this UHV unit)The external Tri-band antenna is connected to the adapter holder of the mobile radio telephone. The microphone is located in the ceiling light.The telephone preinstallation with the adapter holder for the mobile radio telephone can only be installed in vehicles with left-hand drive for technical reasons.BluetoothTM with the audio stream functionSupport for this profile (A2DP) only for the version LOW/GSM II (up to 52/08). This version was only installed in the model Superb.This function allows the sound transmission (music) from the internal player of the mobile radio telephone, possibly a multimedia system, which must however support the BluetoothTM technology for music transmission. This transmission is performed via the BluetoothTM interface using the control unit for operating the mobile radio telephone that can establish and hold two different BluetoothTM connections. The hands-free profile (HFP) is used for the hands-free functions of the mobile radio telephone and the Advanced Audio Distribution Profile (A2DP) is used for playing music. The music Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted player must be operated on the multimedia system itself (mobile multimedia system, unless authorised by ŠKODA AUTO A. S. ŠKODA radio AUTO A.telephone, S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� if applicable). The control unit for operating the mobile radio telephone is located under the front passenger seat and communicates with the other respective control units via the CAN bus databuses.22GBSystem overviewJ285 J533 J519J503RxxxJ412R38J527***AdapterR54R54ABR65SP81_26Legend: J285 J412 J453 J503 J519 J527 J533 R38 R54 R65 RxxxTelephone preinstallation without adapter Telephone preinstallation with adapter by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted control unit Protected in the dash panel insert * Communication adapter "Bluetooth only" unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept with any liability control unit for operating mobile radio in this document.** with respect to the the correctness of information Copyright by ŠKODA AUTO with A. S.� adapter without Bluetooth Communication telephone (UHV) CAN data line dash panel insert (500 Kbit/s) multi-function steering wheel control unit radio/radio navigation system control unit CAN data line Convenience (100 Kbit/s) onboard supply control unit (BCM) CAN data line infotainment (100 Kbit/s) steering column electronics control unit GATEWAY LIN data line (19.2 Kbit/s) telephone microphone communication cable line mobile radio telephone external antenna of the phone loudspeaker (the number depends on the verBluetoothTM - data transmission sion of the vehicle equipment)A BGB23Telephone preinstallation GSM IIlTelephone preinstallation Premium/GSM IIIThe telephone preinstallation GSM lll offers the customer a highly convenient version of the handsfree system. This telephone preinstallation, just as the GSM II version, is linked up to the mobile radio telephone using the BluetoothTM technology. The GSM II version uses the BluetoothTM technology with the so-called rSAP profile. The telephone preinstallation GSM IIl only enables the connection of mobile radio telephones which support the BluetoothTM technology using the rSAP profile.BluetoothTM with rSAP profile The BluetoothTM technology, which uses the rSAP profile, enables the reading of the SIM cards of the mobile radio telephones. The control unit for operating the mobile radio telephone, which uses BluetoothTM with rSAP, has therefore access to the data on the SIM card and the mobile radio telephone. Thanks to this wireless connection, which uses the rSAP profile, there is no longer any need to use the adapter holder of the mobile radio telephone. Thus, the mobile radio telephone can be placed anywhere inside the vehicle (for example, in the luggage compartment). In order for the control unit for operating the mobile radio telephone to process the wireless data transmission from the SIM card and the mobile radio telephone, its successful connection (pairing) extends to the mobile radio telephone. Connection procedure: • Ignition switched on. • Search for the respective mobile radio telephone using the multi-function steering wheel and select it in the information display of the dash panel insert (the phone must have an activated BluetoothTM + activated BT-visibility and at the same time an rSAP profile - remote SIM mode). • Enter the six-digit PIN of the control unit for operating the mobile radio telephone, which is shown in the information display of the dash panel insert, in the mobile radio telephone. • If required, enter the PIN of the SIM card in the information display of the dash panel insert (for the first so-called pairing, it can only be entered in the information display of the dash panel insert because only here the choice can be made whether the PIN should be stored or not). • The instructions of the mobile radio telephone must be followed in order to further perform the login of the mobile radio telephone in the operating unit of the mobile radio telephone. • After the connection, the identification data is read from the SIM card and the phonebook is downloaded in the control unit for operating the mobile radio telephone, whereby the mobile radio telephone logs off from the GSM network, because the further communication with the GSM network is only ensured by the control unit for operating the mobile radio telephone; only the BluetoothTM interface remains active in the mobile radio telephone while the rest of the menu is blocked. You can only chose to separate it from the control unit for operating the mobile radio telephone or disconnect the BluetoothTM connection. In this case, the control unit of the mobile radio telephone logs off from the GSM network while the mobile radio telephone logs in again. For the automatic connection of the mobile radio telephone to the control unit for operating the mobile Protected by copyright. Copyingof for this privatecontrol or commercial purposes, in part or in whole, is not permitted radio telephone, it is required to carry out the authorisation unit in the menu of the mobile unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect toon the correctness of information in this document. can Copyright ŠKODA AUTO A. S. � radio telephone each time the ignition is switched again (detailed information bebyfound in the user manual of the mobile radio telephone). The control unit for operating the mobile radio telephone can be diagnosed and it communicates with the other respective control units via the CAN bus databuses. It is located under the front passenger seat just as the GSM ll version. The external Tri-band antenna is connected to the control unit for operating the mobile radio telephone. The microphone is located in the ceiling light.24GBFunction of the telephone preinstallation GSM IIl: • Convenience operation of the functions for the mobile radio telephone by means of the radio, possibly the radio navigation system, which assists the communication via the BAP protocol. • Convenience operation of the functions for the mobile radio telephone using the buttons of the multi-function steering wheel (the description of the functions of the buttons for the multi-function steering wheel can be found in the user manual of the vehicle). • Display of information from the mobile radio telephone on the information display of the dash panel insert and on the display of the radio or radio navigation system. • Possibility of displaying the SMS on the information display of the dash panel insert. • Possibility of switching over to "mute" mode (sound suppression). • Voice control of the mobile radio telephone • The control unit for operating the mobile radio telephone fulfills the functions of the classic handsfree system including the support of the PBAP profile, which is responsable for the exchange of the positions in the phonebook of the mobile radio telephone.external Tri-band antenna of the phonehigh frequency radiationcontrol unit for operating the mobile radio telephoneBluetoothTM with rSAPmobile radio telephoneSP81_69Headset (headphone speaker set) In the event that the user wishes to conduct private conversations without them being played back via the loudspeakers of the vehicle, the headset can be used. However, this headset must support the BluetoothTM technology. The BluetoothTM headset profile (HSP) establishes the connection of the headset with the control unit for operating the mobile radio telephone.acoustic signalsProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�BluetoothTM with HSP control unit for operating the mobile radio telephoneHeadsetSP81_71GB25Telephone preinstallation GSM IIlE440 E221 E441J285J503RxxxR65J533 R54 Headset J527J412 J519 Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Audio R38Legend:E221 E440 E441 J285 J412 J503 J519 J527 multi-function steering wheel multi-function buttons incorporated on the left of the steering wheel multi-function buttons incorporated on the right of the steering wheel control unit in the dash panel insert control unit for operating the mobile radio telephone radio/radio navigation system control unit onboard supply control unit (BCM) steering column electronics control unit CAN data line dash panel insert CAN data line Convenience CAN data line infotainment LIN data line BluetoothTM - data transmission - 500 Kbit/s - 100 Kbit/s - 100 Kbit/s - 19.2 Kbit/s J533 R38 R54 R65 RxxxSP81_70GATEWAY telephone microphone mobile radio telephone external antenna of the phone loudspeaker (the number depends on the version of the vehicle equipment)26GBPossibilities of the mobile phone operationOperation by means of the dash panel insertThe dash panel insert assists the following functions: • • • • • • Tracking the first download of the directories Display of the phonebook with the possibility of the choice of contact Display of the calling list with the possibility of the choice of contact Accepting an incoming call Terminating a current call Accepting or rejecting a call on the lineThe functions of the UHV unit are only assisted by the dash panel insert High line with Maxi DOT display.Operation by means of the multi-function steering wheelIn the phone version, the multi-function steering wheel (MFSW) is fitted with two buttons for operating the UHV unit. The first one is the PTT button, which is used to activate the voice control, similar as on the adapter. The second one is the HOOK button which is marked with the telephone symbol.HOOK buttonPTT buttonFunction of the HOOK button: Access to the phone menu from another context on the dash panel insert • Access to the called numbers from the phone menu • Dialing the contact which was selected in the phonebook or in the calling list • Accepting an incoming call (briefly pressing) • Rejecting an incoming call (pressing for a long period of time) Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted • A. S. Accepting a S. call the line (brie flyliability pressing) unless authorised by ŠKODA AUTO ŠKODA AUTO A. doeson not guarantee or accept any with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� • Rejecting a call on the line (pressing for a long period of time) SP81_30 •The multi-function steering wheel does not function when the ignition is switched off, even if the relevant menu is shown on the dash panel insert.GB27Possibilities of the mobile phone operationOperation by means of the radio or navigation systemThe radio or navigation system assists the following functions: • • • • • • • • • Display of the phonebook with the possibility of dialing a contact* Display of the calling list with the possibility of dialing a contact Display of the operator, the signal strength and the name or type of the phone Quick search in the phonebook after entering the first letter of the contact Setting of the six most frequently used contacts on the main screen for quick dialing Accepting an incoming call Terminating a current call Accepting or rejecting a call on the line Dialing a phone number on the keypad of the contact display for the radio or the navigation (the input of the DTMF tones on the UHV unit GSM ll during an ongoing call is not assisted, the version with UHV GSM lll assists this function) Restoring the factory setting of the UHV unit Switching off the microphone in the inside of the vehicle• •* The display of the phonebook is functionally different between the radio and navigation system. Whereas on the radio, when the phonebook and its individual positions are displayed, a real-time communication proceeds with the UHV unit, during which the navigation system stores a copy of the phonebook in the internal memory and does not communicate with the UHV unit when scrowling through the directory. As a result, possible changes made in the phonebook (during the connection of the phone with the UHV unit) appear in the navigation system with a delay as compared to the radio. Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted The user is informed about the phonebook has been updated with the message "New unless authorised by ŠKODA AUTO A. S. Šthe KODAfact AUTOthat A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� phonebook available". The illustration of the phonebook on the Maxi DOT display in the dash panel insert proceeds in the same way as on the radio.The functions of the UHV control unit are only available on a radio or navigation system with the assistance of the communication via BAP protocol using the UHV unit.Voice control of the mobile radio telephoneThe voice control of the phone is activated by the PTT button on the multi-function steering wheel or on the phone holder. After the signal sounds, spoken commands can be given. The time during which the system is ready to accept and carry out spoken commands, is called dialogue. The system responds with audible feedback and reports any possible further steps. The dialogue may be started or terminated at any time by pressing the PTT button on the multi-function steering wheel or on the holder. The dialogue is automatically terminated after carrying out an operation, for example when deleting a name in the phonebook. When a call is received, the dialogue is immediately terminated so that the call can be accepted. If the system does not detect the voice command, the system answers with the question "Pardon?" and thus making it possible to set a new task. After the 2nd incorrect attempt, the system repeats the instructions for help. After the 3rd incorrect attempt, the answer "Terminate" follows and the dialogue is closed.28GBNetworking between Bluetooth devicesThese devices must log onto the Bluetooth network so that the mobile radio telephone and the other devices can be operated together with the mobile phone preinstallation. One also says: "The devices must be networked". This procedure involves the following part steps: • • • Activation of the Bluetooth interface (interface) in the devices involved Visibility of the devices for the networking process Connecting the devices involved by entering the key dataBefore the first and the subsequent connections, independent of the version of the mobile phone preinstallation, the following conditions must always be met: • The vehicle is stationary. • The ignition key is inserted. • The ignition is switched on.Activation of the Bluetooth interface (interface) on the mobile radio telephoneAlthough electronic devices such as mobile radio telephones, PDA, etc. do not necessarily communicate only via Bluetooth data, but also via other interfaces, which include for example USB, the Bluetooth interface must normally be switched on in these devices. This is performed via the setup menu of the device to be connected.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�On the Nokia 3109 mobile radio telephone, these functions can be found in the main menu in the option "Settings" under the caption "Connection". Here you select the option "Bluetooth".SP81_31 SP81_32 SP81_33For connecting to the mobile phone preinstallation "Premium", the rSAP profile must be especially activated on the mobile radio telephone. Please observe the user manual of your phone.GB29Networking between Bluetooth devicesSelect "Switch on" and confirm the selection. The Bluetooth interface is now activated by the mobile radio telephone just as the mobile phone preinstallation "Standard".The Bluetooth interface on the mobile phone preinstallation "Premium" is always in the active mode, so that it must not be activated manually if the mobile radio telephone is connected.SP81_34 SP81_35Visibility of the devices for the networking processOnly after setting the Bluetooth device to "Visibility" it can be identified by other Bluetooth devices and is displayed as a new communication partner. This also applies to the mobile radio telephone and to the telephone preinstallation. The visibility is only required when connecting to the piconet for the first time.Setting the visibility on the Nokia 3109 mobile radio telephone After activating the Bluetooth interface, the current visibility mode of the mobile radio telephone is displayed in the menu "Bluetooth" of the mobile radio telephone.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�By selecting the option "My phone's visibility" you can go into an option's menu, in which you can select between "Permanent visibility", "Temporary visibility" and "Hidden". If the option "Temporary visibility" is selected, the user has two minutes available for the connection procedure to be performed. If the option "Permanent visibility" is selected, there is no time limit for the connection procedure. For security reasons, you should not forget to set the mobile radio telephone again to "Hidden" once you have connected it.SP81_36 SP81_37 SP81_3830GBVisibility of the preinstallation for the mobile radio telephone UHV LOW – GSM II up to 52/08 – only Škoda SuperbThere are three ways of setting the visibility of the mobile phone preinstallation "UHV LOW - GSM II". The subsequent connection can be performed under the condition that the vehicle is not moving.1st possibility After switching on the ignition, the Bluetooth connection of the mobile radio telephone preinstallation will be visible for five minutes. After this time has elapsed or after driving off, the Bluetooth connection of the mobile phone preinstallation will be hidden again.SP81_632nd possibility First of all press the information button and then the failure button separately and in stages within 5 seconds. The Bluetooth connection of the mobile phone preinstallation will be visible again for 5 minutes. This is notified by a confirmation tone.SP81_643rd possibility The phone button on the multi-function steering wheel can be pressed twice in rapid succession as an alternative method to enable the visibility of the Bluetooth connection. The setting of the visibility is once more confirmed by the corresponding tone.SP81_65Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB31Networking between Bluetooth devicesVisibility of the mobile phone preinstallation GSM III and GSM II as of 52/08The UHV High +/GSM II is always visible (if no other phone is connected), even while driving. It is not necessary for the user to activate the visibility. After switching on the ignition, the Bluetooth connection of the mobile radio telephone preinstallation will be permanently visible. After driving off, Bluetooth becomes hidden. In addition to the possibilities already described, the mobile phone preinstallation can also be made visible on the display of the dash panel insert via the menu of the phone.Call up the main menu, select the phone menu and confirm with the OK button.After the selection is confirmed, select the option Bluetooth and further select visibility. Here, for the question "Switch on visibility?", two options are given - "Yes" and "No". The mobile phone preinstallation becomes visible by pressing "Yes" and then the OK button.SP81_60 SP81_61 SP81_6232Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GBFirst connection via BluetoothWhen connecting the mobile radio telephone, the passkey, which ensures the authorisation to connect the device to the mobile phone preinstallation, is transmitted. This means that the mobile phone preinstallation checks if an authorised device tries to log onto the network. The passkey is generated by the mobile phone preinstallation and is shown on the display of the dash panel insert (Premium). The connection procedure between the mobile radio telephone and the mobile phone preinstallation can take up to three minutes. If the mobile phone preinstallation should assume the function of the connected mobile radio telephone in the mobile network (only with regard to the telephone preinstallation "Premium"), it is necessary to transfer the personal identification number (PIN) into the mobile phone preinstallation. The following text describes as an example how to connect the Nokia 3109 phone to the mobile radio telephone preinstallations "High +" and "Premium" for the first time.Connection to the mobile phone preinstallation "High +"Hardware requirements • • Software requirements • All networked devices are capable of BlueRadio operative, and/or radio or navigation tooth communication. Correctly installed mobile radio telephone • The mobile radio telephone supports at least preinstallation the HFP profile and possibly also profiles • Protected Operational mobile radio telephone with by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted such as PBAP. unless authorised if by possible, ŠKODA AUTO A. S. ŠKODA AUTO A. S. does notare guarantee or accept any liability Bluetooth more devices which with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� compatible such as headset, etc. (a maximum Before starting the connection of seven devices in one network) • Switch on the mobile radio telephone and unblock it. • Switch on the ignition and wait approx. 10 seconds. • When using this UHV, a Bluetooth connection is possible even while driving. Connection of the mobile radio telephone using Bluetooth You can start the search for nearby Bluetooth devices in the mobile radio telephone using the option "Search for audio" in the menu "Bluetooth". The mobile radio telephone now searches for visible Bluetooth devices within range. This procedure may take several minutes.SP81_39 SP81_40GB33First connection via BluetoothThe mobile radio telephone shows on its display the list of the found Bluetooth devices. Select the device "Skoda_BT" from the list.Choosing "Select" on the mobile radio telephone confirms that the Bluetooth connection will be established. Then the mobile radio telephone establishes the Bluetooth connection with the mobile phone preinstallation.SP81_41 SP81_42 SP81_43When using the mobile phone preinstallation "HighProtected +", the numerical sequence "1234" defiby copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Š KODA AUTO S. ŠKODA AUTO S. does not guarantee or accept any liability ned in the factory must be A. entered as aA.stanwith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� dard code in the mobile radio telephone within 30 seconds. Confirm the entry with "OK". The mobile radio telephone stores the identification number of the Bluetooth device (ID). The mobile phone preinstallation also stores it in the directory for the subsequent Bluetooth communication with this mobile radio telephone.SP81_44When switching on the ignition, the mobile phone preinstallation searches automatically for the last connected mobile radio telephone. If this phone cannot be reached, the mobile phone preinstallation starts the search for the previously connected devices in the opposite direction of the directory.SP81_4534GBDepending on the type of mobile radio telephone, it is possible to set it in such a way that it is no longer required to enter the passkey (code) when establishing a Bluetooth connection in the future. Then the connection is automatically established when switching on the ignition, if the mobile radio telephone is within the reception range of the Bluetooth network.After establishing the connection with the mobile phone preinstallation, the mobile radio telephone inquires in this case whether the connection should be performed automatically in the future. When choosing "Yes", it is not necessary to confirm this selection with the OK button of the mobile phone. Only when choosing "No", it is necessary to confirm it by pressing the OK button.If a phone holder with two buttons (PTT, SOS) is installed on the version “High +”, the SOS button does not function.SP81_46-51The Bluetooth hands-free system must not be connected to any other phone while establishing the connection of the mobile radio telephone with the hands-free system via Bluetooth.If an incorrect passkey is entered (code) or the entry of the passkey fails, the connection procedure must be started again by visibility of the Bluetooth connection. A low frequency acoustic signal notifies that the connection is interrupted.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�If the mobile radio telephone must be connected to a mobile phone preinstallation which is located in another vehicle and is identical in design, if necessary a name change must be performed by means of the mobile phone preinstallation in order to clearly assign the transmitter.GB35First connection via BluetoothConnection to the mobile phone preinstallation "Premium"Hardware requirements • • • • Radio operative, and/or radio or navigation Correctly installed mobile radio telephone preinstallation Operational mobile radio telephone with Bluetooth If possible, more devices which are compatible such as headset, etc. Software requirements • All networked devices are capable of Bluetooth communication. • The mobile radio telephone supports at least the rSAP profile. Before starting the connection • Put the mobile radio telephone within the reception range of the Bluetooth in order to connect to the mobile radio telephone preinstallation. • Switch on the mobile radio telephone and unblock it. • Activate the Bluetooth function of the mobile radio telephone. • The vehicle must be stationary for this purpose.Connection of the mobile radio telephone using BluetoothActivate the menu of the phone on the display of the control unit in the dash panel insert (in the combined device) for example using the button on the multi-function steering wheel.Select the function "New user" in the menu of the phone. Then the mobile phone preinstallation searches for the operational Bluetooth devices within range.In the list of the displayed devices, select the desired mobile radio telephone and confirm the selection with the OK button. The mobile phone preinstallation is now trying to establish a connection with the selected device. This device identifies the connection request and inquires via the user's own display, whether the connection SP81_56 Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted with the device "Skoda_BT" should be unless authorised byestablisŠKODA AUTO A. S. ŠKODA SP81_57 AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� hed. Confirm this with the OK button of the mobiSP81_52 le radio telephone.36GBA 16-digit code, which is divided into 4 number blocks of four digits, is now shown on the display of the dash panel insert. The mobile radio telephone requests from you to enter and confirm the code on the display. You have 30 seconds to do so.If the entry has been completed successfully within this period of time, the mobile radio telephone indicates on the display that the connection with the mobile phone preinstallation was established.SP81_58 SP81_53 SP81_54Just as when connecting to the mobile phone preinstallation "High +", here as well it can be determined whether the connection is established in the future once the mobile radio telephone is within range of the operational mobile radio telephone preinstallation. After switching on the ignition, the mobile phone preinstallation "Premium" will try to connect to the three last connected devices provided that such devices are within range.SP81_55The mobile phone preinstallation "Premium" is able to read the phonebook on the SIM