TECHNICAL DOCUMENTATION

SSP 086 START-STOP system in Škoda vehicles

PDFEN28 pages3 MB
SSP 086 START-STOP system in Škoda vehicles - PDF cover

This PDF is currently unavailable.

Read document text
ServiceSTART-STOP systemin Škoda vehicles86Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Self-study programme Ever increasing energy prices and tougher emission limits make it necessary to look for ways to reduce fuel consumption and exhaust emissions. The START-STOP system was developed to address these circumstances, whereby the engine is automatically switched off when the car is stopped, for example at traffic lights. The engine starts again automatically without the driver using the ignition key as soon as the journey is continued.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�2GB ContentsSTART-STOP system 4Function and operation System overview6 10 14System requirementsElectrical components18 25NotesYou will find the notes for the assembly and disassembly, diagnostics as well as detailed user information in the workshop manuals, the diagnosis unit VAS 505x and in the onboard literature. The time for going to press was on the 04/2010. This brochure is not subject to update.GBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�3 START-STOP systemSTART-STOP systemThe START-STOP system is designed to reduce fuel consumption, whereby the engine switches off automatically during the standstill phases of the vehicle and restarts automatically whenever the driver wishes to continue the journey. The START-STOP mode is automatically activated after driving off once the vehicle is driven for approx. four seconds at a speed of at least 3 km/h.3km/h approx. 4 sactive STARTSTOP systemSP86_04The function of the START-STOP system is performed via the engine management and is integrated in the software of the engine control unit. The START-STOP system is designed for the following engines: - 1.2 ltr./55 kW TDI with Common Rail injection system - 1.6 ltr./77 kW TDI with Common Rail injection systemA determing factor for the START-STOP system is whether the charge status of the starter battery allows the engine to restart. This procedure is referred to as start voltage prediction. It states if all the properties and values of the engine related to a restart of the engine were evaluated. Therefore, the charge status of the battery is constantly measured. Based on the start voltage prediction, it is determined whether the START-STOP operation can be carried out or specific electrical loads are switched off in order to maintain the power consumption. This concerns the seat heating system, the rear window heating and the mirror heating systems. These systems are switched off before restarting the engine and are blocked for the duration of the engine start.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�4GB It was possible to implement the START-STOP system with only a few new components. These are amongst others the battery monitoring control unit J367 and the button for the START-STOP operation F416. It was necessary, however, to adapt some components such as the starter and the alternator in order to operate the START-STOP system. Components and systems adapted for operating the START-STOP system:Component / systemPrevious adaptation measures - extension of programme codes of engine control units by an information bit for the START-STOP system (for control units that enable the operation of the START-STOP system or are influenced by this system) - LIN connection to the diagnostic interface for data bus (GATEWAY) - fleece battery to increase the cycle durability - higher wear resistance - battery with a battery monitoring control unit at negative terminal of battery - new battery wiring - battery monitoring control unit connected to diagnostic interface for data bus (Gateway) via LIN data bus - gear recognition sensor G604 with PWM signal outputControl units (in general)Alternator Battery StarterOnboard supplyGearboxPlease always observe the valid designations in ETKA (Electronic Catalogue of Original Parts) when ordering spare parts.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB5 Function and operationOperating conceptThe START-STOP system is available for engines with manual gearboxes.SP86_05Switching off the START-STOP system If the driver does not wish to operate the STARTSTOP system it can be switched off using the button for START-STOP operation F416 . The deactivation of the START-STOP system is indicated when the readiness indicator of the START-STOP system in the display of the dash panel insert goes out. The function is reactivated by pressing the button once again. The START-STOP system is automatically switched on after the ignition key has been pulled out and reinserted. If the vehicle exceeds the speed of 3 km/h for a period of approx. four seconds, the START-STOP system becomes active.button for START-STOP operation F416SP86_07readiness indicator of the START-STOP systemProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP86_06The type of display in the display of the dash panel insert differs depending on the convenience equipment. The position of the button F416 varies depending on the model range of the vehicle. The concept of positioning the button F416 for the individual model ranges can be found on page 18 of this self-study programme.6GB NotesProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB7 Function and operationOperation of the START-STOP systemExample of the function course of the STARTSTOP system. Engine stop phaseThe vehicle approaches a red traffic light at a speed of 50 km/h.SP86_08The driver shifts to a lower gear and brakes the vehicles until it comes to a standstill.SP86_09He switches to neutral and releases the clutch pedal.SP86_10Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The START-STOP system switches the engine off. The START-STOP symbol in the display of the dash panel insert indicates whether the engine is ready to be switched on again.Engine is offSP86_118GB Engine start phaseThe traffic light turns green.SP86_12The driver depresses the clutch pedal.SP86_13The START-STOP system automatically switches the engine on again. The START-STOP symbol in the display of the dash panel insert goes out.SP86_14The driver engages a gear, the vehicle accelerates and he continues his journey.SP86_15Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP86_16 GB9 System overviewStructure of the START-STOP systemThe START-STOP system is implemented in the software of the engine control unit as a function. The system itself uses a wide range of vehicle components and subsystems for the START-STOP operation. The necessary vehicle components for the START-STOP system, some of which were specially adapted for this system, are given in the following diagram. Much more information is required however in order to coordinate the START-STOP operation with other vehicle systems and to monitor the conditions of the START-STOP system. This information is provided on the following pages.Legend A C C1 B F F36 F416 G62 G79 G701 J104 J255 J285 J367 J500 J503 J519 J532 J533 J623 1 Electromechanical power-assisted steering Battery 2 Speed signal, path recognition Alternator 3 Engine management systems Voltage regulator (e.g. ignition, fuel supply, mixture preparaStarter tion, exhaust gas recirculation, secondary Brake light switch air injection, exhaust cleaning etc.) Clutch pedal switch 4 Belt detection Button for START-STOP operation 5 Heating, fan, air conditioning control Coolant temperature sender 6 Terminal 50R Accelerator pedal sender 7 Terminal 30 (stabilised) Gearbox neutral position sender ABS/ESP control unit Climatronic control unit Control unit in the dash panel insert CAN data bus line Battery monitoring control unit LIN data bus line Steering aid control unit Positive line Control unit with display device for radio Earth lead and navigation system Sensor, input signal Onboard supply control unit (BCM) Actuator, output signal Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠCAN KODA AUTO A. S. does drive not guarantee or accept any liability Voltage stabilizer data bus with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Data bus diagnostic interface CAN data bus Convenience (GATEWAY) CAN data bus infotainment Engine control unit10GB F416 1 F36G79 J500 G62 J623 G701 J367 A J104 2 FProtected by copyright. Copying for private or commercial purposes, in part or in C whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�3 C1B J533 6 J532 4 J519 75 J255 J503J285SP86_22GB11 System overviewSystem communicationThe system logic must determine first whether after "ignition on" the preconditions for the activation of the START-STOP operation are met. In this case, the engine control unit coordinates the operation of the START-STOP system with other vehicle systems. On a vehicle equipped with the START-STOP system, the engine is more frequently switched on and therefore the battery voltage and the charging of the alternator must be monitored. In addition, the voltage supply for the radio, possibly the navigation and the dash panel insert, is stabilised to approx. 12 volts by using a voltage stabilizer while the engine is restarted. The usual comfort of the occupants is thus maintained.CAN data bus communication● signal button for STARTSTOP system ● enable signal for STARTSTOP active ● speed signal ● oil level signal ● load signal of lambda probe heating ● gear recognition signal ● clutch signal ● accelerator pedal module signal ● injection control signal ● other OBD-related signals ● gearbox neutral position sender signal● brake pedal signal ● brake pressure signal ● wheel speed signal ● ESP signal● power consumption signal ● load signal of alternator (via LIN data bus) ● battery conditionJ104J533● outside temperature signal ● inside temperature signal ● vent temperature signal ● defrost operation signal for windscreen ● load signal of compressor ● load signal of compressor● activation signal of consumersJ623J255J519Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�12GB Legend J104 J285 J255 J367 J500 ABS/ESP control unit Control unit in the dash panel insert Climatronic control unit Battery monitoring control unit Steering aid control unit J533 J519 J623 Data bus diagnostic interface (GATEWAY) Onboard supply control unit (BCM) Engine control unit CAN data bus line LIN data bus line● charge status of the battery ● speed signal ● operating condition of ● display operation Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted the battery - battery voltunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� age- battery power- battery temperatureJ367J285● load signal of electromechanical power-assisted steering ● steering wheel movement signalJ500SP86_23GB13 System requirementsStopping - engine stopConditions related to the handling of the vehicle by the driver (switching to neutral and releasing the clutch) and additional conditions must be met so that the START-STOP system can switch off the engine. Conditions for engine stop: The vehicle is stationary (speed = 0 km/h).The engine speed is below 1200 rpm.The coolant temperature is between 25 °C and 100 °C.P=The brake pressure is greater than 55 kPa (550 mbar).U=The energy consumption calculated before "engine off" and needed in order to restart the engine can be supplied by the battery (start voltage prediction). The battery temperature is greater than or equal to -1 °C and less than 55 °C.The demand on the air conditioning by the occupants is not too high. The difference between the specified and actual vent temperature is below 8 °C.The diesel particle filter is not in the regeneration mode.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�14GB Continuing the journey - engine startThe defined conditions must be met so that the START-STOP system automatically restarts the engine.Conditions for engine start: The driver is fastened (belt buckle locked).The engine hood is closed.The driver's door is closed.The clutch pedal is operated.The gear lever is in neutral position.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB15 System requirementsVehicle requirement - automatic engine startThe starting of the engine by the START-STOP system may also be triggered by other circumstances without conscious intervention of the driver: - change in the driving condition (e.g. vehicle starts to roll after releasing the brakes) - activation of the systems within the vehicle by the occupants (e.g. Defrost activated) - change in ambient conditions of the vehicle systems (e.g. outside temperature) Reasons for the engine start: The vehicle starts to roll on a steep road so that braking and steering assistance is required. If the vehicle exceeds the speed of 3 km/h, the START-STOP system starts the engine automatically.The coolant temperature is no longer between 25 °C and 100 °C.P=Insufficient pressure in the brake system.U=The charge status of the battery is no longer sufficent.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Operating the Defrost button for the windscreen. Increasing the fan speed inside the vehicle by more than four stages. Increasing the heating or cooling requirement of the air conditioning system (the difference of the specified/actual vent temperature is greater than 12 °C).To safeguard the restart of the engine when the START-STOP operation is active certain additional consumers or convenience functions, such as for example the seat heating, can be switched off after the engine stop.16GB Reasons for the interruption of the START-STOP operationIn addition to the previously described influencing variables for an engine stop or an automatic engine start, the following causes render the START-STOP operation functionless.The START-STOP system is switched off using the button for the START-STOP operation.The charge status of the battery does not enable the engine to be restarted (start voltage prediction).The defrost function (windscreen) is active.The set temperature of the air conditioning system differs more than 8 °C from the actual temperature in the interior of the vehicle.The engine speed is greater than 1200 rpm.The alternator (generator) is defective, for example the V-belt is torn. Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permittedunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB17 Electrical componentsSensors and actuators Button for START-STOP operation F416The button F416 is located in the centre console next to the handbrake.Function The button is used for activating and deactivating the START-STOP operation while driving. The START-STOP system is activated automatically each time the ignition is switched on. The system itself is put into operation as soon as the test for fulfilling the aforementioned operating conditions has been carried out.button for START-STOP operation F416SP86_01Effects of signal failure If the function of the button for the START-STOP operation fails, the engine control unit switches off the START-STOP system automatically. A fault is entered in the fault memory of the engine control unit.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�18GB battery monitoring control unit J367The information that the battery has enough electric power for restarting the engine, is an essential requirement for the operation of the START-STOP system. Therefore, vehicles with the START-STOP system are equipped with a battery monitoring control unit with integrated battery sensor. The battery monitoring control unit is located directly on the negative connection terminal of the ground cable and is connected to the data bus diagnostic interface (Gateway) J533 via the LIN data bus.SP86_03battery monitoring control unit J367Use of signalEffects of signal failureThe battery sensor integrated in the battery conIn the event of a signal failure of the battery sentrol unit J367 determines: sor, the operating condition of the battery can no - the battery temperature longer be accurately determined and monitored. Protected by copyright. Copying for private or commercial part or in whole, not permitted of the data - the battery voltage An entry ispurposes, madeinin the faultismemory unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�J533. The - the charging current bus diagnostic interface (Gateway) START-STOP system is deactivated. The battery temperature is determined at the negative terminal of the battery and the inside temperature of the battery is evaluated using the performance map. The charge control (charging potential) can be adapted to the charge and operating condition of the battery by means of the obtained data. The aim is to increase the availability of the STARTSTOP system based on the detailed data evaluation of the battery.GB19 Electrical componentsDisplay conceptThe notice and warning messages of the START-STOP system are presented in various ways depending on the equipment of the dash panel insert.The overview of the notice and warning messages for the individual versions of the dash panel inserts can be found in the user manual of the vehicle.Specially adapted components and systems As already mentioned, it was necessary to technically adapt certain components for the operation of the START-STOP system: - fleece battery - gearbox neutral position sender G701 (gear recognition) - generator (alternator) with LIN line - starter - voltage stabilizerProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�You will find the correct designation of the spare parts for the repair in ETKA (Electronic Catalogue of Original Parts). The parts adapted for the START-STOP system are not specifically designated and do not differ at all or only slightly from the usual parts.20GB Fleece battery (AGM - Absorbent Glass Mat)On vehicles with the START-STOP system, only a fleece battery must be used as a starter battery because of its higher cycle durability instead of the usual lead-acid batteries. In addition to gel batteries, fleece batteries represent a technological breakthrough in the development of advanced batteries. The essential difference to the lead battery is that the acid (electrolyte) is fully absorbed by a glass mat which separates the lead grid electrodes from each other. Further advantages of the fleece battery are: - high cold start performance - high deep discharge resistance/capability - high cycle durability - tilt resistance and protection against leakage also in the event of breakage of the battery case - maintenance-freelead grid electrode glass matSP86_53Charging the battery On vehicles with the START-STOP system, the terminal clamps of the battery charger must not be directly connected to the negative terminal of the battery, but only to the engine mass. This ensures that the battery sensor which is integrated in the battery monitoring control unit J367 is not bypassed. If the battery is directly charged by connecting to the negative terminal, this would result in the bypass of the battery sensor and in turn the sensor would not register its data while the battery is charging. Then the battery values stored in the data bus diagnostic interface (Gateway) Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted J533 would not A. correspond the ofor the unless authorised by ŠKODA AUTO S. ŠKODA AUTO to A. S. does values not guarantee accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� charged battery.SP86_02earth point of the engineGB21 Electrical componentsWhen starting the vehicle in case of emergency using the starter cable, the negative terminal of the starter cable must also abut against the earth point of the engine.Gearbox neutral position sender G701To ensure the function of the START-STOP system, the gearbox had to be further equipped with another sensor, which allows the system to register the position of the shift lever when in the neutral position - gearbox neutral position sender G701. The sensor is screwed into the gearbox housing at the top and registers the position of the shift lever without making contact.SP86_51gearbox neutral position sender G701AlternatorOn vehicles with the START-STOP system, the information is transmitted via the LIN data line, which is connected to the data bus diagnostic interface (Gateway) J533. The gateway transmits this information to the other control units (e.g to the engine control unit) via the CAN data bus.StarterIn order to meet the higher demands imposed on the starter by the active START-STOP system (e.g. in city traffic), the mechanical cycle durability of the starter was increased and the ring gear was strengthed.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�22GB Voltage stabilizer J532The voltage stabilizer is essentially a DC/DC* voltage converter which ensures that all multimedia and information systems of the vehicle (radio, navigation, UHV unit, dash panel insert) are active at all times when stopping the vehicle in the START-STOP mode. The voltage stabilizer is located in the floor of the vehicle under the front passenger's seat and has a power output of 200 W.Function Its task is to stabilise the 12 V on-board voltage of the vehicle (terminal 30) at approx. 12 V in certain situations (e.g. when starting the engine). A strong voltage fluctuation might occur on some electrical consumers in the vehicle due to the high starting current.SP86_52Effects of signal failure In case of a function failure of the voltage stabilizer an initiation of the electrical consumers such as radio, possibly navigation, dash panel insert or UHV unit is performed, provided their own supply is not sufficent due to the use of the starter. If it becomes apparent that the above mentioned electrical consumers must be initialised at each engine start, while operating the START-STOP system, this indicates that the stabilizer is defective. Therefore, if no voltage stabilizer is present, the systems would be initialised and entries would be made in the fault memory of the respective control units (for example "on-board voltage, signal is too weak").Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP86_54*DC = Direct CurrentGB23 Electrical componentsFunction The voltage stabilizer is essentially a DC/DC voltage converter. The core of a voltage converter is an electronic memory (capacitor), which can store the electrical energy for a specific period of time. Furthermore, an internal switch (transistor) is required, which controls the outflow of the electrical energy from the memory.key in ignition lock voltage stabilizermemoryswitch starterSP86_49If the ignition lock is turned to "Ignition on", the terminal 15 is thus energised and the voltage stabilizer is switched on. The memory accumulates energy so that the voltage stabilizer has its full electrical output of 200 W available in order to compensate for the voltage drop. The internal switch, which controls the downloading of the memory, is in the open position. The voltage stabilizer is now ready.ignition switched onterminal 15 memory is loadedterminal 30SP86_49When switching on the starter (terminal 50 energised) the voltage stabilizer receives an activation signal (trigger) for the start-up circuit via terminal 50R (R = feedback). The switch is closed by the activation signal. The terminal 50 stored energy flows from the memory and compensates for the voltage fluctuations. Afterwards, the switch opens and the memory Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted starts loading again. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�starting the engineterminal 30 memory is downloadedterminal 50terminal 50Rvoltage is stabilisedSP86_5024GB NotesProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB25 NotesProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�26GB Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB27 Overview of the previously edited self-study programmesNo. Designation1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50No. DesignationMono-Motronic 51 2.0 ltr./85 kW petrol engine with balancing shafts Central locking and two-stage intake manifold Vehicle alarm 52 ŠkodaFabia; 1.4 ltr. TDI engine with unit injection Working with wiring diagrams system ŠKODA FELICIA 53 ŠkodaOctavia; Vehicle presentation Safety of the ŠKODA vehicles 54 ŠkodaOctavia; Electrical Components Principles of ABS - were not published 55 FSI petrol engines; 2.0 ltr./110 kW and 1.6 ltr./85 ABS - FELICIA kW System for safe start-up with transponder 56 Automatic gearbox DSG-02E Air conditioning in the vehicle 57 Diesel engine; 2.0 ltr./103 kW TDI with pump-nozzle Air conditioning FELICIA units, 2.0 ltr./100 kW TDI with pump-nozzle units 1.6 engine - MPI 1AV 58 ŠkodaOctavia, Chassis and electromechanical Four-cylinder diesel engine power-assisted steering Power-assisted steering 59 ŠkodaOctavia RS, 2.0 ltr./147 kW FSI turbo engine ŠKODA OCTAVIA 60 2.0 ltr./103 kW 2V TDI diesel engine; particle filter 1.9 ltr. TDI diesel engine with additive ŠKODA OCTAVIA Convenience electronic system 61 Radio navigation systems in the Škoda ŠKODA OCTAVIA Manual gearbox 02K, 02J 62 ŠkodaRoomster; Vehicle presentation part l 1.6 ltr. and 1.8 ltr. petrol engines 63 ŠkodaRoomster; Vehicle presentation part ll Automatic gearbox - fundamentals 64 ŠkodaFabia II; Vehicle presentation Automatic gearbox 01M 65 ŠkodaSuperb II; Vehicle presentation part l 1.9 ltr./50 kW SDI, 1.9 ltr./81 kW TDI diesel engines 66 ŠkodaSuperb II; Vehicle presentation part ll 1.8 ltr./110 kW and 1.8 ltr./92 kW petrol engines 67 Diesel engine; 2.0 ltr./125 kW TDI with Common OCTAVIA, CAN BUS Rail injection system OCTAVIA - CLIMATRONIC 68 1.4 ltr./92 kW TSI petrol engine with turbocharger OCTAVIA - safety of the vehicle 69 3.6 ltr./191 kW FSI petrol engine OCTAVIA - 1.4 ltr./44 kW engine and gearbox 002 70 All-wheel drive with Haldex coupling of the lV OCTAVIA - ESP - fundamentals, design, function generation OCTAVIA 4 x 4 - all-wheel drive 71 ŠkodaYeti; Vehicle presentation part l 2.0 ltr. 85 kW and 88 kW petrol engines 72 ŠkodaYeti; Vehicle presentation part ll Radio navigation system - design and functions 73 LPG system in Škoda vehicles ŠKODA FABIA - technical information 74 1.2 ltr./77 kW TSI petrol engine with turbocharger ŠKODA FABIA - electrical systems 75 7-speed dual-clutch automatic gearbox 0AM ŠKODA FABIA - electro-hydraulic power-assisted 76 Green Line vehicles steering 77 Geometry 1.4 ltr. - 16 V 55/74 kW petrol engines 78 Passive safety ŠKODA FABIA - 1.9 ltr. TDI Unit injection 79 Additional heating Manual gearbox 02T and 002 80 2.0 ltr., 1.6 ltr., 1.2 ltr. diesel engines with Common ŠkodaOctavia; model 2001 Rail injection system Euro-On-Board-Diagnosis 81 Bluetooth in Škoda vehicles Automatic gearbox 001 82in part Sensors inis Škoda vehicles Protected by copyright. Copying for private or commercial purposes, or in whole, not permitted 6-Speed gearbox 02M unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not1.4 guarantee or accept any liability 83 ltr./132 kW TSI petrol engine with dual-charging ŠkodaFabia - ESP with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� (compressor, turbocharger) Exhaust emissions 84 ŠkodaFabia II RS; Vehicle presentation Extended service intervals 85 KESSY system in Škoda vehicles Three-cylinder petrol engines 1.2 ltr. 86 START-STOP system in Škoda vehicles ŠkodaSuperb; Vehicle presentation; part l ŠkodaSuperb; Vehicle presentation; part ll ŠkodaSuperb; 2.8 ltr./142 kW V6 petrol engine ŠkodaSuperb; 2.5 ltr./114 kW TDI V6 petrol engine ŠkodaSuperb; automatic gearbox 01VOnly for the internal use in the service network ŠKODA. All rights reserved. Subject to technical modifications. S00.2002.86.20 E GB Technical status 04/2010 © ŠKODA AUTO a.s. http://portal.skoda-auto.comThis paper was made out of chlorine-free bleached cellulose.86