TECHNICAL DOCUMENTATION

SSP 092 Škoda Citigo Vehicle presentation

PDFEN52 pages7 MB
SSP 092 Škoda Citigo Vehicle presentation - PDF cover

This PDF is currently unavailable.

Read document text
Škoda CitigoVehicle presentationSelf-study programmeProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�ŠKODA Service®92 IntroductionFor the first time in its history, Škoda has now entered into the mini-car segment featuring their model Citigo, which is designated class A 00. The vehicle, which is especially suitable for city traffic, has a growing sales potential based on the current trend of expansion of towns and cities. At the same time, the Citigo is Škoda's brand new model which makes its debut as a 3-door version. It will be launched in a 5-door version at a later date.SP92_02Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_032GB Contents1. Škoda Citigo ........................................................................................................................................................................................................................4 2. Vehicle dimensions ....................................................................................................................................................................................................... 7 3. Body ......................................................................................................................................................................................................................................9 4. Engines ...............................................................................................................................................................................................................................10 5. Fuel system ..................................................................................................................................................................................................................... 12 6. Gearbox ..............................................................................................................................................................................................................................14 7. Chassis ................................................................................................................................................................................................................................. 17 8. Brake system ................................................................................................................................................................................................................. 24 9. Seats ............................................ ...................................................................................................................................................................................27 10. Ventilation, heating, air conditioning system.............................................................................................................................................30 11. Luggage compartment ............................................................................................................................................................................................31 12. Electrical systems ...................................................................................................................................................................................................... 33 13. Convenience..................................................................................................................................................................................................................36 14. Safety ...............................................................................................................................................................................................................................44 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilityYou will find the instructions for the assembly, disassembly, repair and diagnosis as well as the detailed user information in the diagnosis units VAS and in the onboard literature. The time for going to press was on the 11/2011. This brochure is not subject to an update.GB3 1. Škoda Citigo1.1. ProductionThe Škoda Citigo is a small car which was first introduced in October 2011. It is manufactured in the Bratislava plant, which also produces VW, Seat and Audi Group models and where the body shells and gearboxes are made for the Porsche brand.Mladá BoleslavCZSKBratislavaProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_1004GB 1.2. Conception› easy to manoeuvre and park in city traffic › enough comfort and generous amount of interior space for both the driver and the front seat passenger › Isofix anchorages › 2 rear seats › the vehicle offers optimum performance and fuel efficiency through engines and gearboxes when driving in city traffic and through urban areas › small-displacement petrol engines (which reach operating temperature more quickly) › automated manual transmission with Hill Hold Control › luggage compartment designed for hand luggage › for the transport of several pieces of luggage or large items you can use the rear bench seat or create additional loading space by folding down the rear Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted seatsunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_04GB5 The ŠKODA Citigo places great focus on completely new elements, which are used for the first time in a ŠKODA vehicle: › System City Safe Drive with CV (Closing Velocity) Sensor › Side airbags with head-thorax protection feature - a new concept of passive safety that combines two airbags (side and head airbags) in one system › Move&Fun (fully functional mobile navigation system) - a portable, multimedia device that combines the functions of navigation, hands-free system, multi-function display, music player and radio with each other (provided the vehicle is equipped with these functions) › New three-cylinder engine with 1.0 litre of displacement › 5-speed automated manual transmission AMT (offered at a later date) › Easy Entry system - in the 3-door version, it enables easy handling of the front seats to provide unobstructed access to the rear seats (standard for Ambition and Elegance, optional for Active) › Handbag holder integrated in the opening mechanism of the glove compartment in front of the front passenger seat (offered at a later date)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Note › small, overall exterior dimensions, while maintaining generous interior dimensions › choice of 3 or 5-door version › 5-speed manual gearbox or automated manual transmission AMT for comfort (offered at a later date) › ecological Green Tec Version with both engine variants in combination with a manual gearbox (offered at a later date) › sophisticated safety equipment (4 airbags, ABS, ESP, City Safe Drive) depending on the equipment › panoramic sunroof (offered at a later date) › wide range of convenience equipment (rear parking sensors, cruise control, heated front seats, electrically adjustable and heated exterior rearview mirrors and more)6GB 2. Vehicle dimensions2.1. Exterior dimensions of the vehicleSP92_05Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�1641SP92_05SP92_05GB7 2.2. Interior dimensions of the vehicle14171389SP92_05951 lProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�251 lSP92_058GB 3. Body3.1. Body structureThe Citigo boasts a newly developed platform and focuses on improved occupant safety. A high percentage of the body structure is made of ultra-high-strength steel. A new technology of laser welding is used as a special joining method to connect the roof and the body-side panel.SP92_06Ratio of the used sheet metalsFirmness of the used sheet metals 350 MPa8.1 % 10.6 % 24.9 %300–590 MPa 300–590 MPa 500–980 MPa 1400 MPaProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA 39.3 % AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�17.2 %SP92_07GB9 4. Engines4.1. Three-cylinder petrol engine 1.0 ltr. 44 kW/55 kWEngine characteristics › oil filter element bolted to the oil pan › aluminum oil pan equipped with a projection for bolting to the AC compressor › crankshaft made from cast iron › trapezoidal link rear suspension (wrought iron) › 4V cylinder head, integrated exhaust gas line › monolithic cylinder head cover with integrated camshaft › camshaft setting with electro-hydraulic control valve in the cylinder head cover › water pump driven via a toothed belt, integrated in the thermostat housing › pressure-regulated Duocentric oil pump › plastic suction line › camshaft drive via toothed belt with tensioning pulleyProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_0810GB 1,0 MPI/44 kW[Nm] 120 110 100 90 80 70 60 60 [kW] 50 40 30 20 10 0 [Nm] 120 110 100 90 80 70 601,0 MPI/55 kW60 [kW] 50 40 30 20 10 0Ė ĕĕĕĘ ĕĕĕĚ ĕĕĕĜ ĕĕĕ îvrwßĖ]Ė ĕĕĕĘ ĕĕĕĚ ĕĕĕĜ ĕĕĕ îvrwßĖ]Power output TorqueSP92_04Additional characteristics Design Number of cylinders Cylinder spacing (mm) Displacement VH (cm3) Number of valves/cylinder Inline design 3 82 999 4Protected by copyright. Stroke s (mm)Copying for private or commercial 76,4 purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Opening d (mm) 74,5Idle speed (rpm) Shutdown speed (rpm) Power output PN (kW) (HP) Average piston speed (m/s) Torque Md, max. (Nm) Specific torque (Nm/l)850 +/-50 approx. 6.200 44 (at n = 5.500 rpm) 60 (at n = 5500 rpm) 15.79 (at n = 6200 rpm)Specific power output (kW/l) 44 95 (n = 4000 rpm) 95SP92_08GB11 5. Fuel system5.1. Petrol fuel systemCharacteristics › volume of 35 ltr. › fuel tank made of plastic › activated charcoal filter to tank (0.7 ltr.)Gravitational valveFiller neckElectrical fuel pumpFuel lineǙ Ǚ Ǚ Ǚ Ǚ Ǚ ǙO 1HQQYROXPHQ 7DQNEODVH LQ &RH[7HFKQLN $NWLYNRKOHILOWHU DP 7DQN   6FKUDXESXQNWH I %ODVH  6FKUDXESXQNWH I (LQI¾OOU (LQI¾OOURKU QLFKW OHLWI¦KLJ D Line to activated charcoal )¸UGHUJHEHUHLQKHLW 03, PL filter systemVent line of fuel tankFuel pumpProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_09fuel tank12GB 5.2. Schematic overview of fuel system - petrol enginesThe fuel is extracted out of the fuel tank and is delivered in the fuel filter with fuel pressure regulator via the electric fuel pump. The fuel pressure regulator maintains the nominal pressure in the complete fuel system, enabling the fuel to be pumped into the engine compartment and further to the injection units.Gravitational valveVent tankFuel pumpActivated charcoal filter systemMIntake air Electromagnetic Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does notof guarantee or accept any liability valve activated Fuel with respect to the correctness of distributor information in this document. Copyright by ŠKODA AUTO A. S.� charcoal filter systemInjection unitSP92_10Suction lineGB13 6. GearboxBoth engine versions can be customised with a five-speed manual gearbox or a five-speed automated manual transmission.6.1. Manual gearboxThe five-speed gearbox with manual shifting is characterised by precise shift rails, connected with two shift cables. This solution reduces the transmission of vibrations and noise in the interior of the vehicle, caused by the drive assembly. The design is known as the so-called dual-shaft version with final drive and differential gear integrated in the mutual gearbox housing. The weight of the gearbox has been reduced by 8.5 kg compared to the model Fabia. This weight saving was achieved by reducing the number of individual components (by 19%)Basic structural elements › gearbox housing made from cast aluminium › operation via control cables › synchronisation of all the gears › double synchronisation: 2. gear › lifelong filling with transmission oil, 1.2 litresProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Gearbox 1. 1.0 MPI/44 kW 1.0 MPI/55 kW 3.64 3.64 2. 1.95 1.95 3.Speed ratios 4. 0.96 0.96 5. 0.80 0.80 Reverse gear 3.42 3.42 1.27 1.27Axle drive ratio 3.895 4.167Note The new and efficient transmission design changes the previous shift pattern. When shifting into the reverse gear, it is no longer necessary to press the shift lever and move it into first gear. The reverse gear is now located opposite the fifth gear and thus forms a classic double-H appearance.14GB 6.1.1. Basic characteristics of the gearboxType of gearbox Shafts Fitting position Length and width of construction Weight without oil Materials used for the gearbox housing and clutch housing Oil quantity5-speed manual gearbox Input shaft, drive shaft, reverse gear shaft Front/transverse mounting 341 mm/462 mm 24.0 kg Aluminium 1.2 ltr.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB15 6.2. Automatic gearboxThe automated manual transmission is based on the design of the manual gearbox and intended exclusively for the 1.0 MPI/44 kW and 55 kW engines. Its basic structure is respected and in addition the automated manual transmission is equipped with electro-mechanical actuators. The automatic gearbox now uses electromechanical actuators and thus differs significantly in operation from previous gearboxes, where the shifting mechanism was performed through hydraulic control. This results in weight reduction, more precise control and greater safety because of the smaller number of components. One of the gear shift actuators controls the clutch gear, while the second and the third actuators change the gears according to the instructions of the driver or the control unit. The control unit is located on the front left wing and uses the information from the senders to determine when a gear change should take place. The driver operates the gearshift via the shift lever, which in addition to the classical positions D, N and R, has a middle path for the sequence selection of gears + / -. The engaged gear is displayed on the instrument cluster in the driver's field of vision. There is no selector lever position "P" on an automated gearshift with Fly-by-Wire operation. Therefore, the engine must be started in the "N" position with the brake pedal pressed. This gearbox is different from other automatic gearboxes because it lacks the so-called creeping motion, which is triggered in automatic gearboxes after selecting the drive mode D (Drive). The Citigo drives only after the accelerator pedal is pressed, thus increasing the engine speed.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Automatic gearboxFunction of the automated manual transmissionIt is based on a manual gearbox. Releasing and shifting the clutch is carried out by the driver via the gearbox control unit through the transmission control module. The clutch pedal is omitted and the shift lever is replaced by the driving mode switch.› automated manual transmission › 5 gears forward › front-wheel drive › electro/mechanical steering from ZF Sachs › external control unit › without parking lock (shift by wire) › 29.2 kg (ZP3 + oil)16GB 7. ChassisFrame assemblyNew frame assemblies are used in the ŠKODA Citigo, which are shared by the Volkswagen Up! and the SEAT Mii. The designers have focused primarily on optimising the weight and safety parameters, i.e. much emphasis is placed on properties that are especially useful in city traffic, for which the ŠKODA Citigo has been developed. One design concept for three different vehicles made it possible to reduce the production and development costs.7.1. Front axleThe front axle consists of a classical MacPherson system, where the wheel is guided by lower triangular steel cross-arms and an anti-roll bar. Its concept is based on the implementation of the solution for the Škoda Fabia II. The geometry of the front axle contributes to excellent driving characteristics, driving comfort as well as safety and precise steering.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Characteristics › the independant McPherson front wheel suspension ensures optimum driving stability and driving dynamics › balanced axle elements (the consoles of the axle housing are made of cast aluminum) › double row angular contact ball bearings integrated in the axle journal › internally-cooled disc brakesGB17 Front axleMcPherson damping unitintegrated brakeanti-roll barstabiliser connecting rodaxle journalaxle arm axle housingProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_18swivel supportcardan shaftswheel bearing of the 1st generation with centre nut18GB Unit mountingSP92_09Engine mounting - dry clamping bracketSP92_09Gearbox mounting - new mounting concept below the battery consoleProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Swivel supportSP92_09SP92_09Left cardan shaft – solid shaft Ø 21.5 mmSP92_09Right cardan shaft – solid shaft Ø 21.5 mmGB19 7.2. Rear axleThe rear trailing arm axle with trailing arms is based on a proven design and is fi tted principally to larger models such as the Fabia or Roomster. The new design of the trailing arm axle including its mounting in the body fully complies with the principle of modular concept. A torsion cross member replaces (matched exactly to the required torsional rigidity section) the stabiliser function and the longitudinal arms ensure the vertical movement of the wheels. A misaligned attachment was chosen for the mounting of the springs and dampers, which does not require an elaborate installation yet allows the designers to use the maximum vehicle width of the luggage compartment between the rear wheel houses. The dampers are also sensibly placed at the end of the longitudinal arms, which complete the longest deflection path. The gas-liquid-filled units can dampen most efficiently the vibrations that may result from driving over uneven road surfaces. attachment to the bodytelescopic damperscoil springtrailing armrubber metal bearing torsion barSP92_19Characteristics › dead beam axle with cross-section open to the bottom › hydraulic damper with an upper "pin bearing" › wheel bearing of the 2nd generation with lightweight flange › four-hole wheel mountingProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability › axle guide bearing designed to absorb the lateral forces with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�20GB 7.3. SteeringAll the versions of the model Citigo are equipped with a precise rack and pinion steering. In all equipment ranges, the steering is assisted by an electromechanical power steering as standard. The design solution for the power steering retains the necessary feedback and ensures at the same time the reduction of the fuel consumption due to the intelligent control of the electric drive. The electric motor is only active when there is a need - the torque sensor monitors the movement of the steering wheel by the driver and on the basis of this pulse, the electric drive of the power steering begins to operate. The power steering is set in such a way that its effect decreases with increasing speed, which contributes to the safe steering of the vehicle at high speeds, while providing a simple rotation of the steering wheel when parking. For the intended use in city traffic, the ratio of 2.92 rotations between both end positions was selected for the steering with power steering, which allows an accurate and rapid change of driving direction.C-EPS steering column (Column electric power steering) with power steeringColumn without power steeringpower-assisted steering control unitProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�steering column with crash energy absorbing mounting bracketsteering column adjustable in two axespower steering sensor power steering gearSP92_20The variable steering stiffness, which depends on the vehicle speed and the steering wheel rotational speed, improves the safety and driving comfort. This means that, for example during parking manoeuvres, the power steering effect is greater than while driving on the motorway. For this purpose, a sensor is mounted above the steering body which transmits information about the steering wheel rotational speed to the power steering control unit. The information about the vehicle speed is transmitted via the CAN bus.GB21 7.4. WheelsSteel wheels with large caps Aries 5J × 14‘‘ ET35 Tyres 165/70 R14 Active Ambition EleganceLight alloy wheels Apus 5J × 14‘‘ ET35 Tyres 175/65 R14Light alloy wheels Auriga 5.5J × 15‘‘ ET41 Tyres 185/55 R15● ●–○ ○ ●– not available○ ○ ○● Standard equipment○ Special equipmentProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Silver steel wheels without hub caps 5J × 14‘‘ ET35 Tyres 165/70 R14 (equipment Active)SP92_34Note The overview of wheels and decorative caps mentioned below corresponds to the offer at the start of series production.22GB Black steel wheels with large hub caps Aries 5J × 14‘‘ ET35 Tyres 165/70 R14SP92_35Light alloy wheels Apus 5J × 14‘‘ ET35 Tyres 175/65 R14Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_36Light alloy wheels Auriga 5.5J × 15‘‘ ET41 Tyres 185/55 R15SP92_37GB23 8. Brake systemThe ŠKODA Citigo features a vacuum assisted dual-diagonal circuit hydraulic braking system. The handbrake acts mechanically on the rear wheels. All the vehicles, which are equipped with ABS, TCS or ESP systems, feature the dual-diagonal circuit braking system vacuum assisted with Dual Rate system with the so-called progressive characteristics. For this reason, the reinforced braking has the effect of increasing the response during critical braking. The front wheels are fitted with single-piston floating-caliper disc brakes. The front disc brakes with internal cooling have a diametre of 256 mm and a width of 22 mm. The rear wheels have drum brakes with a diameter of 200 mm and a friction surface width of 40 mm. The braking is caused by friction of the cast iron brake drum and the asbestos-free pads riveted to the brake shoes with automatic adjustment, depending on the wear of the braking surface. › front disc brake › rear drum brake › vacuum-assist power brake › hand-operated mechanical parking brake (acting on the rear wheels) › suspended pedal systemThe Citigo has the following driver and safety assistance systems › ABS › ESP › Roll over prevention › HHC series version as part of the safety packageProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted (roll unless over) partA. of ESP, chassis lowering from elevated position authorised by ŠKODA AUTO S.the ŠKODA AUTO A. S. does not guarantee or an accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Hill Hold Control, part of the ESP as of 22/12› Emergency brake functionCity Emergency Braking System with laser sensorBrake boosterVehicles with braking and stability systems ABS, MABS or ESP are equipped as standard with a brake booster with "dual rate" function, which was already used in the model Škoda Roomster. The term "Dual Rate" refers to a brake booster with progressive brake pressure build-up.Note You will find a detailed description of the brake booster operation with "dual rate" function in the workshop teaching aid No. 58.24GB Front brake› FS III brake integrated in the axle journal › 14“ lightweight brake disc with cooling air channel 256 x 22SP92_09Rear drum brake› 200x40 › adjusting wedge › riveted brake shoe › wheel brake cylinder 17.64 mmProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_09GB25 Pedal system for vehicle with left-hand drive› left-hand drive 9“ / right-hand drive 8.5“ › diametre of brake cylinder: 20.64 mm with brake light sensorBrake fluid reservoir with level meter.XSSOXQJVVHQVRU&UDVKVWUHEHSP92_09Hall sensor and brake light switchHand-operated mechanical parking brakeSP92_09› hand-brake lever › new casing and push-button › casing made of PA and leather+DQGEUHPVKHEHO &2 Ǚ 9HUNOHLGXQJ X 'UXFN › cable routing with brackets Ǚ 9HUNOHLGXQJ LQ 3$ XQ Ǚ $XIQDKPH QHX Ǚ 6HLOYHUOHJXQJ PLW +DO› new bracketProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_0926GB 9. SeatsFront seatsDepending on the equipment, three versions are offered in the Citigo: › without Easy Entry, › with Easy Entry and › in the version for Easy Entry with memory function.SP92_24For all equipment versions, head restraints are fitted to the front seats as standard. Despite the minimal exterior dimensions of the vehicle, the driver and the front passenger have plenty of space in the interior.SP92_101Operation of the driver's seat height adjustment The front seats can be adjusted in the longitudinal direction as standard and the seat back angle is adjustable with a rotary lever fitted to both sides of the backrest. A driver's seat height adjustment is also part of the equipment ranges Ambition and Elegance as standard. A height-adjustable front passenger seat (always together with a height-adjustable driver's seat) or a SP92_04 Copying for private or commercial purposes, in part or in whole, is not permitted Protected by copyright. front seat heating is available upon request.unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB27 Front passenger seat with folding backrest To increase the variability of the interior, a passenger seat with a backrest that can be folded completely forward will be offered at a later date. This function together with folding down the rear seat backrests, allows the transport of objects up to 2 m in length.SP92_25Easy Entry The Easy Entry is a front seat mechanism for easy access to the rear seats. On the top part of the seat backrest, facing the door, there is a lever to unlock the backrest and the guide rails. Everything is connected to the Bowden cables. The backrest tilts forward by means of a spring and the seat can be pushed forward by hand, for example towards the steering wheel. After the rear passengers have entered the vehicle, the complete seat is pushed back by hand and the rails click into place by pulling the backrest back again. The seat is then brought back to the suitable position and does not return to the initial position on its own. The system is designed exclusively for the three-door version of the model Citigo and is part of the equipment ranges Ambition and Elegance as standard and available for the range Active on request.SP92_102EasyEntry MemoryEasyEntry Memory The locking and sliding function is the same as for Easy Entry, with the difference that the seat returns to its original setting - the initial position - before folding down and pushing back the seat. Everything is entirely mechanical. Folding front passenger seat The hinged lever on the side of the seat backrest is unlocked and the backrest folds back to the height of the seat, i.e. a horizontal plane of 0 ° is created beside the driver. A typical backrest Protected only reclines by a by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability 50° angle (measured from the seat).with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_10328GB Rear bench seatThe Citigo has an undivided folding rear bench seat as standard. For higher equipment versions, the seats are divided in the ratio 60:40. For the version with variable luggage compartment floor, both rear seats can be raised with a small wheel or placed in an almost horizontal position.Characteristics › The rear bench seat is designed for two occupants. › The seats have height adjustable headrests. › The head room of 947 mm offers a lot of travel comfort for tall people. › Ample space under the front seats (approx. 20 cm). › Elbow rests integrated in the side trim panels. › There is enough space on the rear bench seat even for tall people.SP92_101Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_26Isofix and TopTetherBoth rear seats are equipped with the Isofix and TopTether systems as standard for securely attaching a child seat.GB29 10. Ventilation, heating, air conditioning systemDue to the proven venting arrangement of the vehicle, the desired temperature in the interior can be easily and quickly reached and the windows can be defogged. The vents are directed towards the windscreen, the side windows and the occupants. The air flow coming from the round vents can be regulated via the two fins on the edge of the dashboard, the remaining vents (in the centre of the dashboard and footwell) are static. Part of the ventilation system is also a powerful heater and the internal air circulation system. The ventilation system can be upgraded with an air conditioner with manual control, including pollen and olfactory filter, for the models Active and Ambition on request (standard for Elegance).Air-conditioning ventSP92_27Control panel on the dashboardProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_2830GB 11. Luggage compartmentWith a capacity of 251 litres, the luggage compartment is larger than average and one of the best in this vehicle segment of small cars conceived for city traffic and short distances. The height of the loading area is 58 cm. After folding back the seat backrests on the rear or front seats, it is possible to transport objects up to 2 metres in length.Folding rear seat backrests, divided 60: 40Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_29GB31 Folding rear seat backrests, divided 60: 40SP92_30Folding rear seat backrests, divided Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�60: 40SP92_3132GB 12. Electrical systems12.1. Start-Stop system with recuperationThe Green tec measure to lower the fuel consumption and reduce the pollutant emissions is offered as an option for the 1.0 MPI engines with power outputs of 44 kW and 55kW. The low fuel consumption in combined mode is achieved by the following technical measures: › brake energy recuperation › Start-Stop system › tyres with lower rolling resistance › interior height of the vehicle reduced by 15 mmSP92_05Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB33 12.2. Instrument clusterThe instrument cluster is located in front of the steering wheel as standard. The shield with round bezel has a precision appearance and emphasises the grown-up style of the vehicle interior. There are two different types which differ by their appearance and function, just as for the dashboard.Active› a round display - speedometer › without rev counter › without onboard computer › coolant temperature warning light (blue - the engine has not reached the operating temperature/ red - the coolant temperature is too high) › the digital unless display provides the following functions: authorised by ŠKODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability digital fuel gauge,with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitteddigital coolant temperature gauge, outside temperature display, including frost gauge (snowflake symbol), seat belt indicator for rear seats, gear recommendation › reset button for trip recorderSP92_0434GB Ambition and Elegance› three round displays (for Elegance with chrome trim): speedometer, rev counter and fuel gauge › coolant temperature warning light (blue - the engine has not reached the operating temperature/ red - the coolant temperature is too high) › the digital display provides the following functions: outside temperature display, including frost gauge (snowflake symbol), seat belt indicator for rear seats, Onboard computer (standard on Elegance, optional for Ambition) - current time, outside temperature, current fuel consumption, average fuel consumption, distance travelled, driving time, average speed, coolant temperature, range gear recommendation, › reset-button for the trip recorder (right) and set-button for the digital clock (left).Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_04SP92_33Note On both versions, the instruments are backlit in green; the light intensity is constant and cannot be changed. The onboard computer in the model Citigo has a specific function, which is not available for any other ŠKODA model, i.e. the digital coolant temperature gauge with numbers. The red seat belt warning light display for the front seats is located in the speedometer area and indicates visually (and then also acoustically) when the seat belt of the occupied driver or front passenger seat is not fastened. The safety of the occupants on the rear bench seat is monitored by the sensors in the seat belt locks. The symbols on the display below the speedometer will show only visually (without acoustic signals) whether the belts on the rear seats have been fastened or not.GB35 13. Convenience13.1. RadioThe radio pre-installation for the model Citigo includes a roof antenna, 2 loudspeakers in the front doors and the necessary wiring for the vehicle. It is supplied as standard starting with the equipment range Active. Vehicles which are supplied with radio pre-installation without radio Funky have a cutout for the radio, including the plug connections, which is protected with a plastic cover. The car radio Funky is available for the equipment ranges Active and Ambition as a special option (standard for Elegance) and includes the following functions:SP92_28› radio receiver FM/AM; › the function RDS (Radio Data System) as well as radio text, provides the FM radio reception of radio text information, which contains mainly information regarding the name of the radio station, the identification of the programme broadcasted or the alternative frequency of the selected channel; › monochromatic display with green backlight; › CD mechanics for audio CD and CD-MP3 with ID3 tags; › AUX-In audio jack on the front panel of the radio; › power output 2/4 × 20 watts; › for the versions Active and Ambition with a glossy black trim; › for the version Elegance with chrome trim. Within the range of special equipment, 4 additional loudspeakers are available for the equipment ranges Active, Ambition and Elegance. This includes two more loudspeakers in the front A-pillars and two speakers mounted in the rear side walls below the elbow rests.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�VBSP92_10636GB 13.2. Move&Fun (fully functional mobile navigation system)The fully functional mobile navigation system Move&Fun is the first device of its kind available for ŠKODA vehicles. It will appeal first and foremost to young customers who will find it a useful and at the same time stylish enhancement of their vehicle in everyday life. Within the range of optional equipment, customers who purchase the equipment ranges Active, Ambition or Elegance may also order a preinstallation for the multi-function device which combines the following components: › onboard computer › radio operation Funky, › navigation system, › Bluetooth Handsfree, › music player. Move&Fun offered within the range of ŠKODA original accessories, has been developed in cooperation with the German manufacturer of navigation systems Navigon. It is based on the device Navigon 70 Premium, which was adapted for use with other electronic systems in the vehicle Citigo via data bus. The built-in special holder with a connection to the CAN data bus is located at the dashboard above the centre console making it easily accessible and close to the driver's field of vision. CharacteristicsProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�› 5“ color touch screen, › 4 GB of internal memory, › navigation including POIs (points of interest), › maps for 37 European countries, › Bluetooth Handsfree, › music player (supported formats: WAV, OGG, WMA), › image viewer (supported formats: JPEG, GIF, TIF, BMP, PNG), › SD card reader, › radio display and operation Funky*, › display of vehicle functions*, › ŠKODA design*, › sound transmission to the loudspeakers in the vehicle* - concerns Handsfree, navigation instructions and music playback from the SD card, › voice control.The functions marked with * are specific to Move&Fun and are not offered in conventional external navigation units.GB37 Fully functional mobile navigation system Move&FunSP92_04Some important functions can be operated without a touch screen, i.e. via the buttons on the centre console of the radio Funky. In the map display on the screen Move&Fun for instance, the functions of the music player can be controlled (skipping between songs or volume control). The system has an internet radio portal pre-installation for additional functions, which will be available in the course of the year 2012..Note Move&Fun can display the vehicle functions by connecting to the vehicle data network (CAN). Commercially available external navigation units cannot offer such functions.This includes for example the display of the onboard computer, such as all its positions as once.The image of the instrument cluster display can be activated on the screen. There is a choice between the rev counter, the coolant temperature gauge or the engine oil temperature gauge.Furthermore, the Move&Fun system can graphically Protected displayby an open door or the operation of purposes, the parking sensors vehicles copyright. Copying for private or commercial in part or in whole, on is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability which are equipped with a guidance display for rear parking. with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�38GB Main menuOnboard computerm{~ÑnwÎcluster yjwnu yºž|}{xsË InstrumentSP92_04Condition of the vehicle }j xƒ~Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Door control Parking sensors (rear) unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB39 Navigation – menuNavigation – map displayNavigation – instructionsSP92_38Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�40GB Function › Bluetooth handsfree 2.0 - Possibility to connect two mobile phones to Move&Fun and to use the connection via Bluetooth to phone or play music via audio streaming. › On Foot Navigation - This function enables to navigate on foot to and from the destination after parking the vehicle. › Clever Parking – automatic parking in the surrounding area. › Driving lane recommendation - graphically displays multilane roads and the lane to move into in order to keep to the route specified by the navigation system. › NAVIGON MyBest POI - displays the distance of up to three preselected POIs (for example, parking space, restaurant and petrol station). › NAVIGON MyRoutes – A route planning that takes into account the individual driving style as well as the day and time of the week. In addition, the navigation also proposes two additional alternative routes. › Reality View Pro - Photo-realistic representation of motorway exits or motorway crossings and junctions, including graphical marking of the correct lane. › Panoramic View 3D - Realistic depiction of the landscape for easier orientation. › TMC voice messaging - Informs the driver via voice message about the traffic situation along the planned route, the length of traffic jams and their causes. › Voice control 2.0 - Allows the driver to control all major functions via voice commands. Available in English, Danish, French, Dutch, Italian, German, Spanish, Swedish and Czech. › Text-to-Speech - The road names and motorway exits are converted from text to speech and passed on to the driver together with the information about the distance to the next navigation point. › Sightseeing Tours NAVIGON - A guide to the best routes and attractions in 18 countries in Europe. With references, opening times and access roads.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB41 13.3. Hill Hold Control (HHC)HHC facilitates the starting off of a vehicle standing on a slope. If the vehicle stops on a slope, the gravitational force exerted by the earth onto the vehicle acts on the inclined plane. According to the force parallelogram, the downhill driving force resulting from the Earth's gravitational force leads to the vehicle rolling downhill when the brake is released. If the vehicle should attempt an uphill approach, first the downhill drive force must be overcome. If the driver does not accelerate sufficiently or he releases the brake pedal or handbrake too early, the drive force is not adequate to overcome the downhill drive force. The vehicle rolls backward during start off. The Hill Hold Control relieves the driver in this situation. The Hill Hold Control is based on the ESC system. The ESC unit must be equipped with a longitudinal acceleration sensor that transmits the information about the vehicle position to the system. It transmits the information about the static component of the Earth's acceleration to the longitudinal acceleration sensor and determines the vehicle's movement. The Hill Hold Control is activated under the following conditions: › vehicle is stationary (information from the speed sensors), › driver's door closed (information from the control unit of the convenience system), › engine is running (information from the engine control unit). The HHC also facilitates the start-off when reversing uphill. The Hill Hold Control always works in the direction of the start-up on a grade. The HCC function also supports the uphill approach by reversing uphill, which is carried out by shifting into the reverse gear.1M23Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�4123412341234Braking torquefDrive torqueSP92_391st phase: Pressure build-up The driver stops and depresses the brake in order to hold the vehicle in a standstill position. 2nd phase: Pressure control The vehicle is stationary. The driver takes his foot off the brake pedal in order to press the accelerator pedal. The Hill Hold Control holds for about 1.5 s the brake pressure in the brake cylinders so that the vehicle does not roll backwards. 3rd phase: Pressure drop The vehicle is still stationary. The driver depresses the accelerator pedal. While the driver increases the drive torque, the Hill Hold Control HHC reduces the brake pressure so that the vehicle neither rolls backwards nor is prevented from starting off at a later stage. 4th phase: Pressure release The vehicle starts off. The drive torque is sufficiently large to accelerate the vehicle forward. The Hill Hold Control has reduced the brake pressure to zero. The vehicle starts off.42GB 13.4. Park Distance Control (PDC)The acoustic signal which informs about the distance of obstacles behind the vehicle helps to correctly estimate the available room for manoeuvring the vehicle, usually when parking. After the reverse gear has been engaged, the three sensors integrated in the rear bumper are automatically activated and emit ultrasonic acoustic waves which alert the driver of an approaching obstacle. The control unit is located in the luggage compartment on the rear left. The warning buzzer is installed in the C-pillar on the left. The acoustic signal may be supplemented on request by a graphical representation on the Move&Fun unit.SP92_46SP92_4013.5. Optical Parking System (OPS)The acoustic signal which informs about the distance of obstacles behind the vehicle helps to correctly estimate the available room for manoeuvring the vehicle, usually when parking. After the reverse gear has been engaged, the three sensors integrated in the rear bumper are automatically activated and emit ultrasonic acoustic waves which alert the driver of an approaching obstacle. The acoustic signal may be supplemented on request by a graphical representation on the Move&Fun unit.Parking sensors (rear)SP92_04 Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB43 14. SafetyThe ŠKODA Citigo was developed with the aim to offer the occupants maximum protection. New standards are set by the ŠKODA Citigo with its high level of safety and extensive use of modern technical solutions, which have never been previously incorporated into the A00 segment. The emergency brake function and the electronic stability program ESP are active safety elements, which are offered within the range of optional equipment. The vehicle is equipped with side airbags HeadThorax as standard, which offer head and chest protection for the occupants seated on the front seats in the event of a side impact.14.1. Passive safetyThe passive safety elements are intended to prevent or minimise the unavoidable consequences of accidents. Many passive safety innovations have already been implemented in the design of the vehicle and are assisted by Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted a number of design solutions and restraint systems. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The body design consists of various shapes and materials of different density (see p. 9).Protection of the occupants › The rigid body structure provides the basis for the occupant protection. › The deformable crush zones in the front and rear of the vehicle ensure maximum energy absorption during an impact. › The special mounting of the drive unit prevents its penetration into the passenger compartment. The drive system is pushed below the passenger compartment in the event of large deformations. › The design of the steering column prevents the displacement of the steering wheel in the vehicle interior towards the driver at the moment of a frontal impact. › The pedals are retracted upon impact to minimise the risk of injury to the driver in the footwell. › The design of the sills and pillars is characterised by high strength and rigidity. › The front door design has side impact protection with increased strength that absorbs the energy at the moment of a side impact.Pedestrian protection › The design and shape of the vehicle front minimise the injuries to pedestrians in the event of a collision. › The special foam cushioning absorbs the energy of the initial impact with the leg of the pedestrian. › Even the headlights and the bumper cover, together with the adequate gap space of the rigid and non-deformable parts of the vehicle to the bumper cover, reduce the risk of leg injuries to pedestrians. › The design of the engine hood, the upper part of the wings, the engine hood attachment as well as parts of the engine compartment are designed in such a way that they can absorb the impact energy of a pedestrian (especially in the head area) as best as possible and thus avoiding serious injuries.44GB Restraint systems slow down the inertial motion of the body upon impact. The main task is to minimise the consequences of any body contact with the rigid parts of the vehicle. The basis of the restraint systems are the three-point seat belts . The new model Citigo is fi tted with three-point seat belts on all four seats. The front seatbelts are equipped with pyrotechnic belt tensioners and belt force limiters. The rear seat belts have neither pyrotechnic belt tensioners nor belt force limiters. All 4 seat belts have a fixed anchor point at the top, i.e. they cannot be adjusted in height. This solution fully meets the required safety parameters. The integrated front headrests are designed to prevent cervical spine injuries in the event of a rear collision. The rear seats are equipped with height-adjustable headrests as standard, which can be fully retracted due to their shape in the event the rear bench seat is not occupied, and therefore the rear view is not obstructed. The driver airbag (in the steering wheel) and the front passenger airbag (in the dashboard) are part of the standard equipment of the vehicle. The front passenger airbag can be supplied with an on-off switch so that it can be deactivated in order to transport a child in a child seat on the front passenger seat. Open the front passenger door, turn the ignition key and press the button on the side of the dashboard in order to deactivate the airbag. The head airbags with head-thorax protection feature are part of the standard equipment of the vehicle and are used to ensure maximum protection of the front occupants. They protect the head and chest of the driver and front passenger on the front seat at the moment of a side impact. In the event of a multiple collision, the airbag control unit can activate the front airbags and at the same time the lateral restraint systems (airbags). The vehicle is supplied as standard with a seat belt indicator for the driver and front passenger seats. The Isofix anchorages located on the rear bench seat are used to fasten the child seat and to create a firm attachment to the vehicle body, which ensures the efficient protection of the child seat during an impact. The rear bench seat is additionally fitted with anchorages for the TopTether system, which minimises the forward rotation of the child seat and helps to slow down the movement of the child's body in the event of an accident. It is an additional attachment system for Isofix. The remaining safety systems round off the complete protection of the occupants and prevent any further injuries from accidents. They are activated together with the airbag activation via the CAN data network.Additional elements › Deactivation of the fuel pump and interruption of the fuel supply from the fuel tank prevent the vehicle potentially catching fire in the case of damage to the fuel line. › The shut-down of power to selected circuits prevents short circuits and possible fire. › The unlocking of the central locking system enables the driver to escape following an accident and facilitates the access to trapped occupants by the emergency personnel. › The activation of the interior lighting helps to orient oneself at night following an accident. › The activation of the warning lights makes other traffic participants aware of the danger.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB45 Side airbags with head protection featureFront airbags for driver and front passengerSP92_43SP92_44Deactivation of the front passenger airbag (upon request)Button for the de-/activation of the system City Safe Drive (upon request), next to the 12 V socket (or cigarette lighter on request)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_04SP92_0446GB 14.2. Active safetyThe driver can easily operate the vehicle due to its active safety elements and thus prevent or solve possible crisis situations.City Safe Drive CSDA novelty in Škoda vehicles is the City Safe Drive system with the emergency brake function. This system is mainly used in city traffic, for which the ŠKODA Citigo is ideally suited. In principle, it is the function of the CV laser sensor, mounted in the top part of the windscreen, to monitor the area in front of the vehicle up to 10 metres. The system is activated at speeds below 30 km/h. If the driver does not respond in the case of a collision with a fixed obstacle or an obstacle moving in direction of travel of the vehicle, the braking system prepares for an emergency stop by the hydraulic brake assistant increasing the pressure supply of the brake system. This eliminates the so-called technical braking deceleration and thus the ideal braking effect is achieved. If the driver does not yet respond or does not slow down the vehicle enough, the emergency brake function is activated automatically and the vehicle is braked with maximum intensity until it comes to a standstill, i.e. the emergency braking system assists the braking undertaken by the driver in order to achieve maximum braking effect. The vehicle can be stopped safely with the emergency braking system at a speed of less than 20 km/h.CV sensor for the system City Safe Drive (optional equipment)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_41A good visibility to the outside is a prerequisite so that the driver does not overlook other traffic participants or miss an unexpected obstacle on the road. The Citigo has a generous amount of glass and the front A-pillars of the body are designed in such a way that the driver has a good overview of what is happening around the vehicle, especially when cornering.GB47 System overview of Front Assist and emergency brake function CSDThe diagram shows the sequence of events identified as risk of collision and with no reaction from the driver.Risk of collision slightly increased increased very highcollisionProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP92_42HBA sensitiveWarningflutterATB precursorATB main stageHBA = hydraulic brake assist; ATB = automatic torque biasingslightly increased risk of collisionincreased risk of collisionvery high risk of collisionFront Assist Speed limit over 30 km/hFluttering of warning Visual and acoustic warnMain stage ATB ing signals, HBA activation, lights and precursor ATB (Brake deceleration 3.5 m/s) preventative brake pres(Brake deceleration 1 m/s) sure build-up in the brake systemEmergency brake application CSD Speed limit under 30 km/hHBA activation, preventative brake pressure buildup in the brake system-Main stage ATB (Brake deceleration 6.0 m/s)Note If the driver depresses the brake pedal when there is a risk of collision, the brake assistant increases the pressure supply of the brake system. The system attempts to minimise any possible consequences of an accident.48GB NotesProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� NotesProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� NotesProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Overview of the previously edited workshop teaching aidsNo.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50DesignationNo.DesignationProtected by copyright. Copying for private or commercial purposes, in part or in whole, i