TECHNICAL DOCUMENTATION

SSP 093 0CF five-speed manual gearbox and automated five-speed manual transmission AMT

PDFEN48 pages3 MB
SSP 093 0CF five-speed manual gearbox and automated five-speed manual transmission AMT - PDF cover

This PDF is currently unavailable.

Read document text
0CF five-speed manual gearbox and automated five-speed manual transmission AMTSelf-study programmeProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�ŠKODA Service®93 The manufacturer's identification MQ100–5F refers to a new mechanical 0CF five-speed manual gearbox. The gearbox is also produced in the new robotised version SQ100–5F - automated five-speed manual transmission AMT. The gearboxes have been developed in the first place for the small vehicle range of the Škoda brand. The design of the gearbox is compact, thus reducing the weight and the amount of manufacturing parts. The model ŠkodaCitigo is the first model of the Škoda brand fitted with the 0CF gearbox and AMT transmissions, which are mounted in combination with new units - 1.0 ltr. three-cylinder petrol engines with power outputs of 44 kW and 55 kW. In future, these gearboxes can also be used in combination with other engines with a torque of up to 120 Nm.Unit building in Mlada Boleslav, where a modern production line for new gearboxes is located.SP93_01Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Contents1. Introduction ������������������������������������������������������������������������ 5 1.1 Description of the gearbox ����������������������������������������������������������� 5 1.2 Technical data �������������������������������������������������������������������� 6 1.2.1 Summary tables ��������������������������������������������������������������� 6 1.2.2 Gearbox versions for individual engines ��������������������������������������������� 7 1.3 Design of the component s ���������������������������������������������������������� 8 1.3.1 Module of the drive shaf t �������������������������������������������������������� 8 1.3.2 Module of the output shaf t ������������������������������������������������������ 8 1.3.3 Module of the differential gear ��������������������������������������������������� 8 1.3.4 Gearshift shaft with shift cover ��������������������������������������������������� 9 1.3.5 Inner shifting rod �������������������������������������������������������������� 9 1.3.6 Housing ������������������������������������������������������������������� 10 1.3.7 Clutch shut-off mechanism ����������������������������������������������������� 112. Gearbox mechanism ����������������������������������������������������������������� 12 2.1 Design ������������������������������������������������������������������������ 12 2.2 Preload on the shaft with inlay in ring-cone bearings �������������������������������������� 14 2.2.1 Bearing seat in 0CF gearbox ���������������������������������������������������� 15 2.3 Drive shaf t ��������������������������������������������������������������������� 16 2.4 Output shaf t ������������������������������������������������������������������� 18 2.5 Reverse gear mechanism ����������������������������������������������������������� 20 2.6 Differential gear ����������������������������������������������������������������� 22 2.7 Gearbox housing ����������������������������������������������������������������� 23 2.8 Path of the transmitted torque ������������������������������������������������������ 24 2.9 Lock synchronisation ������������������������������������������������������������� 26 2.9.1 Double synchronisation �������������������������������������������������������� 273. Shifting ��������������������������������������������������������������������������� 28 3.1 Inner shifting fork ���������������������������������������������������������������� 28 3.2 Gearshift shaft with shift cover ������������������������������������������������������ 29 3.3 Outer shifting ������������������������������������������������������������������� 304. Neutral position sender G701 ����������������������������������������������������������� 32 5. Gearbox mounting ������������������������������������������������������������������� 34 6. Special service tools and devices �������������������������������������������������������� 35 7. Bearing seal for differential gear mounting ������������������������������������������������ 36Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB Automated five-speed manual transmission AMT 8. Introduction ����������������������������������������������������������������������� 37 8.1 Description of the gearbox ��������������������������������������������������������� 37 8.2 Differences to the 0CF gearbox ����������������������������������������������������� 38 9. Module of the electromechanical gearshift mechanism ��������������������������������������� 39 10. Module of the electromechanical clutch actuation ������������������������������������������ 41 11. Gearbox electronics ����������������������������������������������������������������� 43 11.1 Servo motor s ������������������������������������������������������������������� 43 11.2 Speed sensor ������������������������������������������������������������������� 43 11.3 Diagram of transmission control system ����������������������������������������������� 44 12. Clutch lever mount ������������������������������������������������������������������ 45 13. Gearbox actuation by the driver �������������������������������������������������������� 45You will find the instructions for the installation and removal, repair, diagnosis as well as detailed user information in the workshop manuals, the diagnosis units VAS and in the onboard literature. The time for going to press was on the 5/2012. This brochure is not subject to an update.SP93_00Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�E 1. Introduction1.1 Description of the gearboxThe 0CF five-speed manual gearbox is the first one from the new production batch MQ100. When the gearbox was developed, the designers put emphasis on compactness, low weight, simple and accurate shifting and the design of the gearbox components. At present, it is the smallest gearbox manufactured by the company Škoda. The gearbox housing is made of aluminum alloy and consists of two parts arranged transversely. The gearbox consists of two shafts, which run on ring-cone bearings. The gear wheels for the forward gears with synchronisation are located on the output shaft. The forward gears have wheels with helical toothings, each having a different helical angle. The gear wheel system for the reverse gear is composed of straight and conical toothing. A component of the gearbox is the toothed gear of the differential gear with differential.SP93_02Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP93_03GB 1.2 Technical data 1.2.1 Summary tables0CF five-speed manual gearbox – specifications Designation of gearbox Type of gearbox Mounting Dimensions (length/width) Materials used for the gearbox housing and clutch housing Type of gearbox oil Filling quantities of gearbox oil Interval for gearbox oil change Weight (with oil filling) Clutch control 0CF Five-speed gearbox; two-shaft transmission with immovable auxiliary shaft for reverse gear front-transverse assembly 356 mm/462 mm aluminium SAE 75 W 1.2 ltr. filled for life 26.7 kg hydraulic0CF five-speed manual gearbox – transmission characteristics (Z2 : Z 1)* Gearbox: 1.0 ltr./44 kW Differential gear 1st gear 2nd gear 3rd gear 4th gear 5th gear Reverse gear Gradation of the gears Maximum speed *Z  2 – Number of output wheel teeth Z 1 – Number of drive wheel teethProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Engine: 1.0 ltr./55 kW 75 : 18 = 4.166 51 : 14 = 3.643 43 : 22 = 1.955 47 : 37 = 1.27 47 : 49 = 0.959 43 : 54 = 0.796 41 : 28 x 28 : 12 = 3.416 4,57 when 4th gear is engaged 74 : 19 = 3.894SP93_15SP93_16output shaftbalancing gear wheelGB 1.2.2 Gearbox versions for individual enginesThe gearbox for the current units 1.0 ltr./44KW and 1.0 ltr./55 kW differs in the constant mesh (gearbox). The unit with a power output of 44 kW has a balancing gear wheel with 74 teeth, the more powerful engine with a power output of 55kW has a transmission where the gear wheel has one tooth more. The toothing of the output shaft, which is directly responsive to the guide wheel, has 19 teeth for the engine with a power output of 44kW, and 18 teeth for the engine with a power output of 55kW.toothing of the output shaft 19 teeth for engine 44kW 18 teeth for engine 55kWbalancing gear wheel 74 teeth for engine 44kW 75 teeth for engine 55kWSP93_17GBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� 1.3 Design of componentsTo simplify the installation and maintenance of the gearbox, individual assembly groups have been produced as cohesive modules.1.3.1 Module of the drive shaftToothed gears for the 3rd, 4th and 5th gear and tapered roller bearings are pressed on the drive shaft.SP93_121.3.2 Module of the output shaftThe output shaft system consists of moving toothed gears mounted on needle bearings for the individual Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or acceptto any liability transmissions and the corresponding lock synchronisations, whose centres are connected the output shaft with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� through the spline structure.SP93_131.3.3 Module of the differential gearThe differential gear system includes an idler gear, a differential gear and differential gear basket; the whole module operates on ring-cone bearings.SP93_14GB 1.3.4 Gearshift shaft with shift coverThis module consists of a gearshift shaft and a shift cover, on which the reversing light switch is fitted.SP93_701.3.5 Internal shiftingThe internal shifting is composed of three the anti-friction bushes to the common gearshift shaft.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability shiftwith forks together with drivers, which are connected via respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP93_6GB 1.3.6 HousingThe housing consists of two aluminum castings of the gearbox housing (SP93_38, SP93_39) and the clutch housing (SP93_8, SP93_9).bush for bearing seat of output shaftSP93_38SP93_39shaft mounting of auxiliary wheel for reverse gear (see page 21 of this brochure)bush for bearing seat of drive shaftbush for bearing seat of output shaft mounting of shift axle (p. 28)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP93_08SP93_09axle mounting for auxiliary toothed gear for reverse gear10GB 1.3.7 Clutch shut-off mechanismThe shut-off mechanism of the clutch consists of a release bearing, a release lever, a spring and a guide bushing. The release lever in the lower part is supported on the ball stud that is built into the clutch housing.release leverrelease bearing guide bushingspringSP93_18Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP93_58SP93_57attachment of the ball stud for the clutch release lever on the coupling part of the gearbox housingGB11 2. Gearbox mechanism2.1 DesignThe 0CF five-speed manual gearbox has two main shafts and an immovable support shaft for the auxiliary wheel for the reverse gear. The forward gears are equipped with pairs of toothed gears with helical teeth. The helical teeth can transfer heavy loads and run more smoothly. reversing light switch F4 driver for shift forkgearshift shaftshift shaft in sliding fit The smooth and noise-free shifting is possible through the forced synchronisation system with which all forward gears are equipped. Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted The synchronisation system unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability is fitted the outputof shaft. with respect to to the correctness information in this document. Copyright by ŠKODA AUTO A. S.� The reverse gear has a system with straight and conical teeth without synchronisation. The guide wheel and the differential gear are also integrated in the gearbox housing. The gearshift shaft is connected to the shift lever with two control cables. gearbox housingtapered roller bearingoutput shaftcore of the synchronous coupling12GB clutch release leverclutch housingdrive shaftidler gearProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�tapered roller bearingdifferential gearsliding sleeve of synchronisationSP93_56toothed gear of reverse gearGB13 2.2 Preload on the shaft with inlay in ring-cone bearingsThe design of the tapered roller bearings requires the precise definition of the axial play for the shaft mounting, or it is necessary that the two tapered roller bearings are pressed onto the shaft a little towards each other, this condition is called preload. With the accuracy required for the preload, the bearings cannot be pressed onto the shafts or the oil in the gearbox housing cannot be decanted, therefore each system with this type of bearing seat must be measured after the completion. The 0CF gearbox is installed robotically. The bearing system on the shaft is then supplemented by a pad with calculated thickness, in such a way that the required preload or the set axial play is applied to the bearing. The output shaft and the differential gear with preload are mounted in the 0CF gearbox. With respect to the temperature range under which the transmission has to work properly, the drive shaft is mounted without preload. The axial play on the drive shaft is set individually for each piece, also with a pad.SP93_11section of complete tapered roller bearingProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�preload padSP93_10Schematic illustration of the preload limit in the system with two single row tapered roller bearings on the shaft, bearing "face-to-face" mounted in X arrangement.The proper adjustment of the axial operating play or preload is of fundamental importance for the function of single row tapered roller bearings. Applying excessive preload causes high friction and increases the temperature of the bearing, in case the excessive play is restricted, the load capacity of the bearing on the contrary is not fully used. In both cases, however, the life of the bearing is shortened or the bearing is fully destroyed and in turn the gearbox is damaged for life.14GB 2.2.1 Bearing seat in 0CF gearboxThe correct operation of the gearbox system depends among others on the use of the suitable bearings. Twelve bearings are used in the mechanical 0CF gearbox. Three pairs of tapered roller bearings and six needle bearings. The drive and output shafts are mounted in X arrangement in systems with two tapered roller bearings "face-to-face". The differential gear is equipped with a system that is composed of two tapered roller bearings in X arrangement. The tapered roller bearings feature a solid inner and outer ring with roller paths and cones in cages. These bearings are not self-locking. The inner ring with cones and cage can therefore be installed independently from the outer bearing ring. When the gearbox is installed, the inner rings which carry the cones in cages are pressed onto the drive shaft and output shaft as well as the differential gear; the independent outer bearing rings are then pressed directly into the bushes of the clutch and gearbox housings. The output shaft is not graded radially, so it was possible to use the same bearing for the mounting of the selector gears for the first through to the fifth gear. Five identical needle bearings are used for the forward gears. The last bearing in the gearbox is the needle bearing for the intermediate toothed gear of the reverse gear.tapered roller bearing needle bearingdifferential gear basketoutput shaftProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�drive shaftSP93_35intermediate gear shaft for reverse gearGB15 2.3 Drive shaftA component part of the shaft workpiece is already the toothing of the first gear, second gear and the toothing of the reverse gear. The toothed gears of the third, fourth and fifth gear are pressed onto the shaft and thus firmly connected and immovable. The pressed-on toothed gears are also secured with three circlips against axial movement. The output shaft is mounted in the gearbox with axial play.spline for mounting the clutchtoothing of the reverse geartoothing for 2nd gear toothing for 1st gearSP93_19individual drive shaftLoad relief on drive shaft and toothed gears The load on the shaft is relieved by drilling a blind hole in its axle. The weight of the toothed gears for the 4th and 5th gear ​​ is reduced by the special recess.recess on both sides of the toothed gear for 5th gearrecess of the toothed gear for 4th gearborehole in the shaft axleProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP93_20cross section of the complete module of the drive shaft16GB Toothed gears Besides the toothing for the reverse gear, which has straight and conical teeth, all transmissions operate via the helical toothing.gear wheel of 4th gear tapered roller bearing gear wheel of 3rd gear gear wheel of 5th gear tapered roller bearingSP93_21Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�compiled module of the drive shaftSP93_22reverse gear toothing with straight teethtoothing of 1st gear toothing of 2nd gearThe toothed gears of the third, fourth and fifth gear are asymmetric and therefore have a user-friendly installation.Function The drive shaft absorbs the energy generated during engine use and transfers it onto the output shaft via the gearing of the shifted gear. The torque is transmitted via the guide wheel onto the differential gear and subsequently to the wheels of the vehicle.GB17 2.4 Output shaftThe shaft has no radial gradients, therefore it has been possible to mount all the gear wheels on the same needle bearings. In places where the centres of the synchronous couplings are connected via the spline structure, the shaft is provided with splines. The individual toothing, which is provided on the shaft workpiece, is the helical toothing, which transfers the torque onto the balancing gear wheel. The load on the output shaft is relieved in its total axial length through the opening - it is a hollow shaft.1.2.3.4.5.Position 1. – 5. are pressed on the needle bearing for toothed gears for the 1st to the 5th gearSP93_23spline structure for permanent connection of synchronous coupling coresThe selector gears for the forward gears are in constant mesh with the toothed gears on the drive shaft, the torque is thus supplied at once to all the wheels; these toothed gears run on needle bearings and are thus separated from the output shaft. The toothed gear for the reverse gear is part of the sliding sleeve of the synchronous coupling for the fifth gear and is therefore permanently connected to the output shaft. The wheel for the reverse gear on the output shaft, is the only one in the entire transmission which is not in permanent mesh with the gearing of the drive shaft. While the forward gear wheels in the shaft axle are immovable and are connected to the output shaft with synchronous couplings, the sliding sleeves move axially and the reverse gear wheel is firmly connected with one of these sliding sleeves, i.e. for the fifth gear. The reverse gear wheel together with the sliding sleeve for the synchronisation move about the shaft axle (axial).Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�18GB toothed gear for 1st gear toothed gear for 2nd geartoothed gear for 5th gearsliding sleeve for 3rd and 4th gearsliding sleeve for 5th gear and reverse gearProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP93_24sliding sleeve for 1st and 2nd gear toothed gear for 4th gear The toothed gear of the reverse gear is a component of the sliding sleevetoothed gear for 3rd gearcore of the synchronous couplingIn regards to the different synchronisations of the 1st and 2nd gear, the sliding sleeve for the 1st and 2nd gear is symmetrical. (see page 27 of this brochure) When installing, the position in which the sleeve is oriented must be kept.Function The output shaft determines the gear ratios of the individual gears by means of the toothed gear system and the system for the synchronous mechanism.GB19 2.5 Reverse gear mechanismThe reverse gear in the gearbox is based on the system with three toothed gears with straight and conical teeth. The torque is transferred from the toothing of the drive shaft onto the intermediate wheel of the reverse gear. The intermediate toothed gear is in constant mesh with the toothing of the drive shaft, thus the energy of the engine is continuously transferred thereto. The last toothed gear of the reverse gear system is the wheel, which supplies the engine power to the output shaft, however this toothed gear is not in constant mesh with the intermediate wheel of the reverse gear. When shifting into the reverse gear, the toothed gear on the drive shaft moves in such a way that it engages with the intermediate wheel and thus connects the drive shaft with the output shaft. The reverse gear is not fitted with the synchronisation, the toothed gear on the output shaft is a component of the sliding sleeve for the synchronisation of the fifth gear.output shaftstraight toothing of the reverse gear on the drive shaftSP93_41The toothed gear of the reverse gear disengages upon shifting into the reverse gear and connects to the intermediate wheelintermediate wheel of the reverse gearshaft (see fig. SP93_36 on p. 21)* T he arrows in the figure represent the direction of the reverse gear selector, the opposite direction allows the shifting of the 5th gear.Function The direction of rotation of the output shaft reverses with the intermediate toothed gear of the reverse gear. Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permittedunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�20GB toothed gear for 5th gear The toothing for the reverse gear is a component of the clutch sleeveaxle distribution in the gearbox housingtoothing in constant meshSP93_42The intermediate toothed gear of the reverse gear is mounted via the needle bearing on the immovable shaft, which is pressed onto the gearbox housing.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP93_36immovable shaft (pins) for the intermediate toothed gear of the reverse gearneedle bearingThe shaft is pressed into the exact position. To enable correct pressing on, the shaft height of the front of the borehole for the pin is measured. There must always be a gap between the pin and the mounting floor in the gearbox housing.GB21 2.6 Differential gearThe differential gear forms part of the gearbox. The differential gear is mounted in the system of single row tapered roller bearings just as the drive and output shafts. The outer rings of these bearings are pressed into respective bushes, one of them in the clutch housing and the second one in the gearbox housing. The adjusting washer, which determines the set preload, is located in the clutch housing. The idler gear is riveted to the differential gear housing by six rivets. The individual differential gear is composed of four gears - two planetary bevel gears and two differential bevel gears, this is known as the classic open differential gear.SP93_25rivet differential gear basket planetary gear of the semi-axle differential bevel gearguide wheel with helical toothingtapered roller bearingSP93_26Protected by copyright. Copying for private or commercial purposes, in part or in whole,module is not permitted of the unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�output shaftBearing covers Special seals are inserted between the housing socket and the differential gear bearings - see page 36 of this brochure. Function The differential gear divides the transmitted torque between two output shafts, to be precise during their changes in speed. Thus allowing the different speed of wheel rotation about the axle, for example, when driving through a curve.22GB 2.7 Gearbox housingThe 0CF gearbox housing consists of two parts, i.e. the clutch housing and the transmission case. During the production, the two parts are screwed together robotically with 18 screws, putty is used as a sealant, which is applied to the gearbox housing prior to the assembly. The opening in the housing for the gearbox neutral position sensor G701 (see page 32 of this brochure) is not drilled for model versions without start-stop system.SP93_27Outlet of the gearbox oil The oil outlet opening is located on the clutch housing in the lower part of the differential gear mounting. The opening is provided with a threaded cone bolt.SP93_29Filling the gearbox oil On vehicles without ABS system, the oil can be filled through the opening, where the speedometer sender G22 is connected. In vehicles equipped with the ABS system, the filling hole is provided with a plastic plug including sealing ring and locking screw.SP93_28Collecting operational impurities A drain socket, for securing the permanent magnet, Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted is located at the bottom of the gearbox housing. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability During the life of the gearbox metallic impurities, which are formed during the operation, are deposited on the magnet.with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP93_37GB23 2.8 Path of the transmitted torqueThe engine power is fed into the gearbox via the drive shaft. After the gear has been engaged, the torque is transmitted from the drive shaft via the respective pair of (when shifting into reverse gear via a triple) toothed gears onto the output shaft. From the output shaft, the torque is further transmitted via the differential gear wheel onto the differential gear. The torque and the rotational speed are transmitted onto the differential gear after the gear has been engaged.SP93_44SP93_46Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�1st gear3rd gear2nd gear4th gearSP93_45SP93_47In the forward gears, the torque impulses of angular momentum are transmitted from the corresponding toothed gears onto the output shaft via the lock synchronisation, see pages 26 and 27 of this brochure.24GB SP93_48neutral position 5th gearreverse gearSP93_43Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP93_49GB25 2.9 Lock synchronisationFunction When shifting gears, the drive and output shafts have different speeds and the synchronisation mechanism is responsible for equalising these speeds as much as possible so that an easy coupling of the locks of the synchronous coupling is possible, therefore resulting in a noise-free, continuous and faster gear change. Principle The gear wheel (A) is separated from the output shaft with the needle bearing. The synchronous core (D) is inversely connected firmly with the output shaft. The synchronous coupling ensures the uneven mechanical connection of the speed gear (A) with the synchronous core (D) for transmitting the torque to the output shaft.shift toothing (A1) gear wheel (A)shift toothing (B1) sliding sleeve (E) synchronising ring (B) core of the synchronous coupling (D) springlock (C)these two wheels are mutually pressed and weldedinner toothing of the sliding sleeve (E1) inner friction cone surface (B2) outer friction cone surface (A2)SP93_30Synchronisation process The shift fork of the inner shifting moves the sliding sleeve (E) axially in the direction of the toothed gear of the gear (A). When disengaging, the torque is transmitted onto the synchronising ring (B). The synchronising ring has a friction cone (B2) on the inside, which is resting on the friction cone of the gear wheel (A2). Due to the friction on the cone surfaces, the speeds of the drive and output shafts begin to equalise. After equalising these speeds, the shift toothing at the synchronising ring (B1) connects to the shift toothing of the gear wheel (A1) and the inner toothing of the sliding sleeve (E1) finally engages into the coupled shift toothing.The sliding sleeve is fitted onto the core of Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability synchronous coupling. with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�theIn neutral position, the sleeve is kept in the central place in relation to the core of the synchronous coupling by means of the locks and two springs.SP93_3126GB 2.9.1 Double synchronisationThe second gear of the 0CF five-speed gearbox is equipped with double synchronisation. The other forward gears have single synchronisation. Principle of double synchronisation for the second gear In the case of double synchronisation, the mechanism of the synchronous coupling consists of two synchronising rings and an intermediate ring. The outer synchronising ring (X) has an inner friction cone surface, the friction surface of the inner ring (Y) is reversed on the outside. Thus the intermediate ring (Z) is stressed by the friction on both sides. The efficiency of the synchronous coupling is directly proportional to the size of the friction surfaces. By adding the second synchroniser ring, the efficiency of the synchronisation has increased.intermediate ring (Z)synchronising ring (Y)synchronising ring (X)SP93_32shift toothing (pressed and welded with toothed gear for the 2nd gear)synchronising ringintermediate ringcore of the synchronous coupling needle bearing output shaftwheel for 1st gearwheel for 2nd gearProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. SP93_33 Copyright by ŠKODA AUTO A. S.�asymmetric sliding sleeveGB27 3. Shifting3.1 Inner fork shiftingThe mechanism of the inner shifting consists of three shift forks with drivers. The forks are connected to the shift axle via the drivers. At the one end the shift shaft is attached to the clutch housing, at the other end it is secured in the gearbox housing. The shift forks move about the axle in sliding fit. When shifting the gears, one fork always moves in the required direction. The clutch sleeves rotate continuously due to the torque at the output shaft (via the cores of the synchronous couplings), i.e. they rotate under the shift forks. For this reason, the fork tips are provided with silicone sleeves. The silicone sleeves are positioned freely on the clutch sleeves and a longitudinal displacement occurs during shifting.driver inner shifting gate gearshift shaftanti-friction bushshift forkSP93_40clutch sleeveProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�28GB 3.2 Gearshift shaft with shift coverThe gearshift shaft is connected to the gearshift lever, i.e. the movements of the shift lever are transferred thereto. The finger that is attached to the shaft engages in the inner gate of the shift fork (see page 28 of this brochure). During the axial movement of the shaft (top-bottom) the shift finger is displaced onto the level of the required inner gate, which belongs to one of the three shift forks, while the axial movement of the gearshift shaft influences the shift path. During the rotational movement of the shaft, the shift finger then moves the corresponding shift fork and the required gear is engaged. The neutral position and the positions of all the other gears are set with adjusting screws including springs, which are located on the outer gate profile. shift covergearshift shaft reversing light switch F4 bushinggate pindust washerdetentadjusting screwshifting gateshift finger shim to measuring sensor G701* (start-stop)SP93_34A vent opening of the gearbox, which is closed with a plastic plug, is a component of the shift cover.The shift gate has a special projection which mechanically actuates the switch for the reversing lights F4 when engaging the reverse gear.SP93_74The detent with spring prevents the direct shifting Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted by Šthe KODA AUTO A. S. Š KODA AUTO A. S. does not guarantee The plug prevents the unless oil authorised from fifth gear into the reverse gear. First, itor isaccept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� from escaping, it is air-tight necessary to shift into the neutral position and then and allows therefore the into the reverse gear. pressure equalisation in the gearbox when the temThe gate pin is pressed into the shift cover and perature of the gearbox oil restricts the positions of the shifting by means of changes. the shift gate.* The shim to the measuring sensor is only mounted on the gearshift shaft on vehicles with the start-stop system.GB29 3.3 Outer shiftingThe shift lever is connected to the gearbox with a set of control cables. The Bowden control cables transfer the movements of the shift lever (selection and shifting) onto the gearshift shaft. The 0CF gearbox exists as a three-stage design, the reverse gear engages from the fifth gear. To prevent inadvertent engagement of the reverse gear, it is secured with a detent, which is a component of the grid sleeve (see page 29 of this brochure). The use of the control cables reduces the transfer of vibrations from the assembly onto the shift lever operated by the driver.selector lever(A2)(B2)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted shift lever of unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�gearboxWhen shifting, the gearshift shaft performs two different movements. Selection movement The axial shaft movement results from the selection movement. The lateral movement of the shift lever (A1) is transferred with the selector lever to the gearbox as well as to the gearshift shaft (A2) through stroke movements (top and bottom). Shifting of the gears Shifting the gears results in the rotational movement of the shaft. The forward and backward movement of the shift lever (B1) is transferred with the shift lever of the gearbox to the gearshift shaft (B2). The rotational movement in the shift cover is restricted by the gate pin, which protrudes in the shift gate (see page 29 of this brochure). When shifting the gear, the pulling cable moves in the opposite direction to the shift lever of the driver.30GB Shifting of the gears Selection movement(B1)(A1)control cables with pulling cablesSP93_59Adjustment of the outer shifting In order to ensure functional and reliable shifting, all parts of the outer shifting must be in the correct position relative to the parts of the inner shifting of the 0CF gearbox. Prior to tightening up the selector control cable and the shifting control cable, the shift lever of the driver must be locked into position when the gear is in the neutral position. Locking the T10027A - see page 35 of this brochure. On the 0CF gearbox, the neutral position of the gearbox and thus the shift shaft in the desired position are not locked.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to driver the correctness ofneutral information in this document. Copyright bywith ŠKODA A. S. � shift lever of the in the position is carried out a AUTO special driftGB31 4. Neutral position sensor G701If the vehicle is equipped with the start-stop system, the 0CF gearbox is fitted with the electronic neutral position sensor G701.SP93_50The sensor operates according to the Hall principle and is inserted through the hole in the gearbox housing to the shift shaft. A special profile plate (P1) is attached at this point to the shift shaft, which changes its distance to the sensor during the shifting - shaft rotation. Therefore, the electromagnetic induction at the Hall element and thus also the voltage at the sensor outlet are influenced.SP93_72P1SP93_07SP93_52 SP93_51Attachment of the sensor G701 at the gearbox housing.On vehicles without start-stop system, no opening for the sensor G701 is drilled in the gearbox housing.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�32GB Voltage profile at the sensor outlet G701 The sensor measures its distance from the shim of the measuring sensor on the shift shaft. The measured value is encoded as a PWM signal. If the value of the PWM signal is within the allowed range (see graph on this page), the control unit detects that the gearbox is in the neutral position. At this moment the start-stop system instructs the engine to switch-off (for example when the vehicles comes to a stop in front of a traffic light) and vice versa, it instructs the engine to start when the driver depresses the clutch pedal. Caution: The start-stop system can start the engine also without depressing the clutch pedal, for example, when activating the air conditioning system or when the battery voltage is too low.Graph depicting the dependence of the output voltage G701 on the size of the air gap from the shim for the measuring sensor.Hall sensor gap Protected by copyright. Copying for private or commercial purposes, in partair or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� shim gearshift shaft PWM signalS2 S1SP93_54air gap defined neutral position large air gap 1st, 3rd and 5th gearsmall air gap 2nd, 4th gear and reverse gearThe neutral position of the gearbox is defined by the range of the PWM signal, from S1 to S2.In vehicles without start-stop system, the 0CF gearboxes have no neutral position sensor G701. In this case, the shift shaft of the gearbox has no shim for the measuring sensor.GB33 5. Gearbox mountingThe gearbox housing is secured in the vehicle* with two basic elements: gearbox base plate with console and torque supports. The clutch housing of the gearbox is further screwed together with the engine.gearbox base plateProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�consoletorqueSP93_02SP93_60* The gearbox mounting shown refers to the model ŠkodaCitigo.34GB 6. Special service tools and devicesIn the table you will find the directory of basic tools and special equipment for the 0CF gearbox.Designation T10027AIllustration of the toolsUse The locking pin is used for proper adjustment of the gearshift mechanism.SP93_55aT10481, T10482The gasket rings of the shift shafts are fitted with stops.SP93_55bT10381/1The caps protect the connecting flanges of the drive shafts from damage when the drive shafts are separated from the gearbox.10-222A/31-5Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted SP93_55c unless authorised by ŠKODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP93_55dThe adapter establishes the suspension system for the gearbox removal. Is attached above the cover lock of the engine compartment. A strut 10-222A/31-3 is then mounted in the adapter. Other suspension parts (see workshop manual): Suspension T30099, bolt T40091/3, square tube T40091/1 and hook MP9-200/10. Adjusting plate for engine and gearbox jack.3282/63SP93_55e3282/64The adapter secures the gearbox when installing and removing.SP93_55fGB35 7. Bearing seal for differential gear mountingBearing covers On the 0CF gearbox, the asymmetrical plastic caps, which prevent the oil from escaping out of the differential gear via the tapered roller bearings is inserted between the housing socket and the differential gear bearings. The pad, which restricts the preload at the bearing system of the differential gear mounting is inserted between this seal and the bearing in the coupling part of the gearbox housing.preload pad sealing capProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP93_80 SP93_7936GB Automated five-speed manual transmission AMT8. Introduction8.1 Description of the gearboxThe 0CF five-speed manual gearbox has a brother in the form of a robotic version - the AMT automatic five-speed transmission. The manufacturer's identification SQ100-5F refers to the gearbox. It is identical in its design to the manual 0CF gearbox, however with automatic shifting and clutch control. The driver selects between the modes "D", "N" and "R". This gearbox has no parking mode "P".In addition to the 2nd and 3rd gear, all the gear ratios are identical to the manual 0CF gearbox. Automated five-speed manual transmission AMT – transmission characteristics (Z2 : Z 1)* Gearbox: 2nd gear 3rd gear *Z  2 – Number of output wheel teeth Z 1 – Number of drive wheel teeth 1.0 ltr./44 kWProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Engine: unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�1.0 ltr./55 kW45 : 21 = 2,143 49 : 36 = 1,361SP93_62SP93_61GB37 8.2 Differences to the 0CF gearboxIn contrast to the mechanical 0CF gearbox, the AMT transmission has in addition the following operating and control elements: – module of the electromechanical gearshift mechanism – module of the electromechanical clutch actuation – speed sensor – control unit for gearbox actuation In contrast to the mechanical 0CF gearbox, the AMT transmission has a different gear ratio of the 2nd and 3rd gear (see table on page 37 of this brochure). Furthermore, the coupling part of the gearbox housing has been adapted, it houses a new opening for the connection of the electro-mechanical actuation with the clutch lever. The design of the clutch lever was changed and it is now mounted differently in the clutch housing compared to the 0CF gearbox.electrical bundle to control unit module of the electromechanical gearshift mechanismselector servo motor (controls the selection of the shift path) speed sensorshift servo motor (operates the gearshift)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability SP93_63 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�opening in the coupling part of the gearbox housing for connecting the mechatronics with the clutch levermodule of the electromechanical clutch actuationservo motor for disengaging the gears38GB 9. Module of the electromechanical gearshift mechanismElectromechanical selection operation for the shift path and the gearshift The shifting and gearshift selection is performed via an electro-mechanical module which is mounted on the gearshift shaft. Thus, the gearbox is not equipped with the shift cover module, as is the case on the mechanical gearbox. The gearshift mechanism is controlled by two servo motors. The first motor is able to move the shift shaft about the vertical axis (top and bottom) and thus to select the appropriate shifting path. The second motor is able to rotate the shift shaft around its own axis and thus achieves the required speeds. The body of the shift module is made of aluminum alloy and comprises a mechanical transmission for the servo motors of the selector shaft. The servo motors are screwed onto the outside of the shift module.SP93_65Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�terminal board for servo motors for connecting to the control unitshift finger servo motor for shifting the gears (shift)SP93_64servo motor for controlling the gear selection (select)gearshift shaftGB39 Inner structure of the electromechanical gearshift mechanismSP93_75In the illustration, the movement transfer of the servo motors onto the selector shaft is shown. The mechanical transmissions of motors for the selector shaft are mounted dry, i.e. without oil.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�servo motor for controlling the gear selection (select)servo motor for shifting the gears (shift)SP93_76Shifting of the gears Selection movement gearshift shaft40GB 10. Module of the electromechanical clutch actuationAutomatic actuation of the clutch release lever The electromechanical clutch actuation is screwed onto the gearbox housing. The pull rod of the mechatronics, which controls the clutch lever, is guided through the opening in the lower part of the coupling part of the gearbox housing. The axial movement of the pull rod is actuated by a servo motor, which is screwed to the body of the electromechanical module. The mechanical transmission from the servo motor to the pull rod is mounted dry, i.e. without oil.SP93_66servo motor for clutch actuationterminal board of servo motor for connecting to the control unit pull rod for shut-offSP93_67Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB41 Inner structure of the electromechanical clutch actuationSP93_77compensating spring segment with toothingProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�servo motor for clutch actuation Distance control system to compensate for the wear and tolerances of the clutch plateSP93_7842GB 11. Gearbox electronics11.1 Servo motorsThree motors are used for the gearbox actuation, two of them are located in the shift module and one of them is located in the module for disengaging. The servo motors are controlled by the gearbox control unit by means of the pulse width modulation. One component of the each motor is a sensor for the current position and direction of rotation. The sensor provides a feedback to the actuation of the motor position and consists of two Hall sensors.11.2 Speed sensorThe speed sensor operates on the principle of induction and is mounted above the toothed gear of the first gear on the output shaft. The sensor senses the rotational speed of the drive shaft. (The selector gear of the first gear is in constant mesh with the drive shaft.)SP93_73Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP93_68GB43 11.3 Diagram of the transmission control systemSensors and switchesActuatorsgearbox control unitspeed sensor ​​gear actuatorgear selector gear clutch actuator engine control unit brake position sensorSP93_8144Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB 12. Clutch lever mountIn contrast to the mechanical 0CF gearbox, the clutch lever has a different mount. The ball stud, which supports the lever, is mounted in the upper part of the housing on the AMT transmission. Caution - the pin is pressed into the housing. (it is connected with screws on the 0CF)SP93_6913. Gearbox actuation by the driverProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�As for all automatic gearboxes, there is no clutch pedal in the vehicle with the automatic AMT transmission. The mode of action is completely replaced with the logic of the control unit and the electromechanical module for clutch actuation. The driver operates the gearshift via the shift lever, which in addition to the classical positions D, N and R, has a middle path for the sequence selection of gears + / -. The currently engaged gear is displayed on the combined instrument panel. The engine start is performed in N mode with the brake pedal full pressed.SP93_71GB45 Notes.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Notes.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Overview of the previously edited workshop teaching aids 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 No. DesignationNo. Designation 51 2.0 ltr./85 kW petrol engine with balancing shafts and Mono-Motronic two-stage intake manifold Central locking 52  ŠkodaFabia; 1.4 ltr. TDI engine with unit injection system Vehicle alarm 53 ŠkodaOctavia; Vehicle presentation Working with wiring diagrams 54 ŠkodaOctavia; Electrical components ŠKODA FELICIA 55 FSI petrol engines; 2.0 ltr./110 kW and 1.6 ltr./85 kW Safety of the ŠKODA vehicles 56 Automatic gearbox DSG-02E Principles of ABS - were not published 57 Diesel engine; 2.0 ltr./103 kW TDI with pump-nozzle units, ABS - FELICIA 2.0 ltr./100 kW TDI with pump-nozzle units System for safe start-up with transponder 58  ŠkodaOctavia, Chassis and electromechanical Air conditioning in the vehicle power-assisted steering Air conditioning FELICIA 59 ŠkodaOctavia RS, 2.0 ltr./147 kW FSI turbo engine 1.6 engine - MPI 1AV 60 2.0 ltr./103 kW 2V TDI diesel engine; particle filter Four-cylinder diesel engine with additive Power-assisted steering 61 Radio navigation systems in Škoda vehicles ŠKODA OCTAVIA 62 ŠkodaRoomster; Vehicle presentation part l 1.9 ltr. TDI diesel engine 63 ŠkodaRoomster; Vehicle presentation part ll ŠKODA OCTAVIA Convenience electronic system 64 ŠkodaFabia II; Vehicle presentation ŠKODA OCTAVIA Manual gearbox 02K, 02J 65 ŠkodaSuperb II; Vehicle presentation part l 1.6 ltr. and 1.8 ltr. petrol engines 66 ŠkodaSuperb II; Vehicle presentation part ll Automatic gearbox - fundamentals 67  Diesel engine; 2.0 ltr./125 kW TDI with Common Rail Automatic gearbox 01M injection system 1.9 ltr./50 kW SDI, 1.9 ltr./81 kW TDI diesel engines 68 1.4 ltr./92 kW TSI petrol engine with turbocharger 1.8 ltr./110 kW and 1.8 ltr./92 kW petrol engines 69 3.6 ltr./191 kW FSI petrol engine OCTAVIA, CAN BUS 70 All-wheel drive with Haldex coupling of the lV. generation OCTAVIA - CLIMATRONIC 71 ŠkodaYeti; Vehicle presentation part l OCTAVIA - safety of the vehicle 72 ŠkodaYeti; Vehicle presentation part ll OCTAVIA - 1.4 ltr./44 kW engine and gearbox 002 73 LPG system in Škoda vehicles OCTAVIA - ESP - fundamentals, design, function 74 1.2 ltr./77 kW TSI petrol engine with turbocharger OCTAVIA 4 x 4 - all-wheel drive 75 7-speed dual-clutch automatic gearbox 0AM 2.0 ltr. 85 kW and 88 kW petrol engines 76 Green Line vehicles Radio navigation system - design and functions 77 Geometry ŠKODA FABIA - technical information 78 Passive safety ŠKODA FABIA - electrical systems 79 Additional heating ŠKODA FABIA - electro-hydraulic power-assisted steering 80  2.0 ltr., 1.6 ltr., 1.2 ltr. diesel engines with Common Rail 1.4 ltr. - 16 V 55/74 kW petrol engines injection system ŠKODA FABIA - 1.9 ltr. TDI Unit injection 81 Bluetooth - in Škoda vehicles Manual gearbox 02T and 002 82 Vehicle sensors - drive ŠkodaOctavia; model 2001 83 1.4 ltr./132 kW TSI petrol engine with dual-charging Euro-On-Board-Diagnosis (compressor, turbocharger) Automatic gearbox 001 84 ŠkodaFabia II RS; Vehicle presentation 6-Speed gearbox 02M 85 KESSY system in Škoda vehicles ŠkodaFabia - ESP 86 START-STOP system in Škoda vehicles Exhaust emissions 87 Immobilisers in Škoda vehicles Extended service intervals 88 Brake and stabilisation systems Three-cylinder petrol engines 1.2 ltr. 89 Vehicle sensors – Safety and Convenience ŠkodaSuperb; Vehicle presentation; part l 90 Increase customer satisfaction with the CSS ŠkodaSuperb; Vehicle presen