TECHNICAL DOCUMENTATION

SSP 095 Škoda Rapid Vehicle presentation

PDFEN48 pages5 MB
SSP 095 Škoda Rapid Vehicle presentation - PDF cover

This PDF is currently unavailable.

Read document text
Vehicle presentationŠkoda RapidProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Self-study programmeŠkODA Service®95 When faced with the challenging task of naming the new model, the company Škoda Auto drew inspiration from its automotive history. The selected names had already been given to Škoda models manufactured through two previous production stages. The model Škoda Rapid 420 was produced for the first time in 1934, several modifications were then made to the follow-up Rapid models manufactured until 1947. The second production stage of the Rapid models began thirty-four years later. In 1981, the company Škoda Auto introduced the model Škoda Garde onto the market, which was soon renamed the Rapid. The production of the models Rapid was completed in 1990 with the model Škoda Rapid 136. The new model Škoda Rapid will be phased in on the European market from 2012 by Škoda Auto, offering a modern and attractive overall appearance that will never go out of style.Škoda Rapid 1500 OHV, type 922, This model was produced in the years 1938-1947(Source: Archive of the company Škoda Auto)SP95_01Škoda Rapid 130, type 743, was produced from 1984 until 1988(Source: Archive of the company Škoda Auto)SP95_02Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB ContentsA look back in history��������������������������������������������������������������������� 2 1. Introduction ������������������������������������������������������������������������� 5 1.1 Presentation of the new vehicle �������������������������������������������������������� 5 1.2 Body design features and exterior elements of the vehicle ������������������������������������� 6 1.3 Concept of storage areas in the interior of the vehicle ���������������������������������������� 7 1.4 Clever solutions������������������������������������������������������������������� 10 1.5 Cover of the B-pillar���������������������������������������������������������������� 11 2. Vehicle dimensions:������������������������������������������������������������������� 12 2.1 Vehicle dimensions ���������������������������������������������������������������� 12 2.2 Weight and capacity ��������������������������������������������������������������� 14 3. Body ����������������������������������������������������������������������������� 15 3.1 Body frame ��������������������������������������������������������������������� 15 3.2 Progressively deformable structure of the vehicle front part ��������������������������������� 16 4. Engines �������������������������������������������������������������������������� 18 4.1 Overview of the engine ������������������������������������������������������������� 18 4.1.1 Petrol engine 1.2 MPI/55 kW ������������������������������������������������������ 19 4.1.2 Petrol engine 1.2 MPI/63 kW and 1.2 TSI/77 kW ����������������������������������������� 20 4.1.3 Petrol engine 1.4 MPI/90 kW ����������������������������������������������������� 22 4.1.4 Diesel engine 1.6 TDI CR DPF/66 kW and 1.6 TDI CR DPF/77 kW����������������������������� 24 5. Gearbox ��������������������������������������������������������������������������� 26 5.1 Overview of the gearbox, tables with gear ratios ������������������������������������������� 26 5.2 Five-speed manual gearboxes 02T and 02R ���������������������������������������������� 27 5.3 Six-speed manual gearbox 02U ������������������������������������������������������� 27 5.4 Automatic gearbox 0AM������������������������������������������������������������� 28 6. Chassis ��������������������������������������������������������������������������� 30 6.1 Design of the frame assembly �������������������������������������������������������� 30 6.2 Front axle ���������������������������������������������������������������������� 32 6.3 Rear axle ����������������������������������������������������������������������� 33 6.4 Brakes ������������������������������������������������������������������������ 34 6.5 Wheels and tyres ����������������������������������������������������������������� 35 7. Vehicle illumination ������������������������������������������������������������������ 36 7.1 Headlights ���������������������������������������������������������������������� 36 7.2 Daylight driving light function - daylight mode �������������������������������������������� 36 7.3 Fog lights with Corner function (turn signals) ��������������������������������������������� 37 7.4 Rear group lighting ���������������������������������������������������������������� 37 8. Airbag system ���������������������������������������������������������������������� 38 8.1 Airbags ������������������������������������������������������������������������ 38 8.2 Front passenger airbag deactivation ��������������������������������������������������� 39 9. Antennas, radio and MDI �������������������������������������������������������������� 40 9.1 Antenna system ������������������������������������������������������������������ 40 9.1.1 Antenna system for radios with 1 tuner ���������������������������������������������� 40 9.1.2 Antenna system for radios with 2 tuners, navigation and GSM ����������������������������� 40 9.2 MDI interface – Media Device Interface ������������������������������������������������� 42 10. Units and warning lights ������������������������������������������������������������� 43 10.1 Instrument panel ���������������������������������������������������������������� 43 10.1.1 Basic design of the instrument panel ����������������������������������������������� 43 10.1.2 Instrument panel with centralProtected multi-function display ������������������������������� 43 by copyright. Copying MFD for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability 10.1.3 Instrument panel with central Maxi DOT display ��������������������������������������� 44 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� 10.2 Warning lights ������������������������������������������������������������������ 45 11. Control elements ������������������������������������������������������������������� 46 11.1 Multi-function steering wheel �������������������������������������������������������� 46 11.2 Toolbar ������������������������������������������������������������������������ 46GB Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The vehicle destined for the European market is assembled in the main plant in Mlada Boleslav.SP95_96You will find the instructions for the installation and removal, repair, diagnosis as well as detailed user information in the diagnostic units VAS and in the onboard literature. The time for going to press was on the 9/2012. This brochure is not subject to an update.SP95_00GB 1. Introduction1.1 Presentation of the new vehicleŠkodaRapid – A spacious, elegant and at the same time compact liftback. The new design elements of the model Škoda Rapid forge a link between the past and the future models of the Škoda brand. The Rapid is a perfect complement of the model range between the Škoda Fabia and the Škoda Octavia. Customers can now choose from a wide range of models, tailored to their interests and specific needs. The model Škoda Rapid is equipped with state-of-the-art technology of reliable and economical consolidated aggregates. Škoda is aiming the Rapid especially at families looking for a roomy vehicle at an affordable priceperformance ratio.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP95_04GB 1.2 Body design features and exterior elements of the vehicleFrom the very beginning, the tailgate of the Rapid was a key element of its new design. Modelled surfaces and sharply drawn lines define the vicinity of the licence plate. The surfaces at the tail end are three-dimensional in shape in the area of the combination of taillights and form a perfectly harmonious, thus expressive unity, rendering the look of the Škoda Rapid unmistakable.Protruding wingsSP95_11Škoda Auto revealed an all new logo design in spring 2011, that combines Škoda's winged arrow executed in chrome and in a black background, surrounded by a circle. The laurel wreath and the Škoda inscription will no longer feature as part of the logo. The word Škoda is now clearly visible on the tailgate.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Together with the headlamps, it creates unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of a information this document. Copyright widens by ŠKODAthe AUTO A. S.� design in whole that visually carModernised logoSP95_09The front grille shows a finely drawn chrome frame that does no longer stand out on the front edge of the engine bonnet, yet is a firm component of the vehicle front.GB Black coloured B-pillars emphasising the uninterrupted length of the glazed area of the vehicle's side windowsSP95_34SP95_08Major indentation on the lower part of the door Škoda lettering on the rear Inscription of the model name RapidNew series of design cast rims, see page 35 of this brochureProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP95_10the rear lights, which wrap around to the sides, illuminate the dark in the traditional Škoda AUTO with the letter CThree engine code lettersGB 1.3 Concept of storage areas in the interior of the vehicleThe interior of the model Škoda Rapid is equipped with practical storage compartments and boxes.Compartment in the front armrest (6)Roof console with sunglasses compartment (1)Foldaway storage compartment of the instrument panel on the front passenger side (4)Mesh pockets on the insides of the front seat backrests (5)Drink holders in the rear centre console (8)SP95_49Drink holders in the front centre console (2)Storage compartments in the front doors (3) and rear side doors (7)Drink holders in the rear seat armrest (11)Side pockets unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� in the luggage compartment (9) loading space below the luggage compartment floor (10)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted(11)SP95_101GB (1)SP95_69(2)SP95_72(3)SP95_73(4)SP95_74(5)SP95_70(6)SP95_71Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�(7)SP95_68(8)SP95_67(9)SP95_75(10)SP95_76GB 1.4 Clever solutionsThe model Škoda Rapid features many "Simply Clever Solutions".Ice scraper The ice scraper mounted on the inside of the fuel cap will be immediately within reach the moment you need it.SP95_81Pocket for the reflective vest A special pocket for a reflective vest is located under the driver's seat. The vest is thus immediately within reach if you need it.SP95_78Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP95_80SP95_77Double-sided carpet in the luggage compartment The double-sided carpet in the luggage compartment has fabric on one side and a washable rubber finish on the other. If necessary, you can easily turn it over and nothing will prevent you from keeping the luggage compartment clean and tidy. Wastebasket An additional “simply clever” feature of the Škoda Rapid is the wastebasket placed in the front doors which can be easily removed when you need to empty it.10GB 1.5 Cover of the B-pillarThe side doors of the vehicle Škoda Rapid differ significantly from the other Škoda models with the vertical window frames that blend smoothly into the area of the B-pillars.SP95_36Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Thanks to the glossy black B-pillar, the glazed area of the side windows appears uniform and suggests a large interior space. The Škoda Rapid's unique design of the door gives it a lightweight and high-quality appearance while its mass has been successfully transferred onto the solid body of the vehicle. The window frames have a distinctly fresh, smart and clear-cut design, even once the door has been opened.The plastic cover is attached to the B-pillar with two clips and two screws.SP95_37GB11 2. Vehicle dimensions:2.1 Exterior and interior dimensions of the vehicleSP95_03SP95_05SP95_06Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�12GB Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP95_07Overview of vehicle dimensions: Length Width (without exterior mirrors) Width (with exterior mirrors) Height (vehicle curb weight) Interior height (vehicle curb weight) Wheel base Front overhang Front track Rear track Tailgate overhang Front head room Rear head room Rear leg room * Wheel base for engine versions 1.2 MPI/55 kW 4483 mm 1706 mm 1940 mm 1461 mm 136 mm 2602 mm 877 mm 1463 mm* 1500 mm* 1004 mm 1014 mm 972 mm 65 mmThe rear seats of the Škoda Rapid have been carefully designed to make your drive smoother and more comfortable, offering class-leading passenger leg and head room. Folding down the rear seats increases the basic volume of the luggage compartment, see table on page 14 of this brochure.GB13 2.2 Weight and capacityWeight and capacity Air resistance correction value C x Fuel tank volume Vehicle curb weight Vehicle loading capacity Total weight of vehicle Max. roof load * Weights refer to engine version 1.2 kW MPI/55 0.3 55 ltr. 1135 kg* 535 kg* 1595 kg* 75 kgLuggage storage space Luggage storage space (with tyre repair set) Max. space after folding down the rear seat backrests (with tyre repair set) Height of loading edge (vehicle curb weight) Length Width (between the wheel houses) Height (up to the cover) 550 ltr. (including loading space below the luggage compartment floor) 1.490 ltr. (including storage space under the floor and leg room for passengers on the rear seats) 690 mm 1048 mm 1008 mm 548 mmProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP95_4214GB 3. Body3.1 Body frameThe body is made ​​ of steel. Its rigidity ensures a high level of passenger safety. The A- and B-pillars are made of high-strength steels with tensile strength 1000-1200 MPa, which protect the passengers in the event of a front or side impact. Nearly two-thirds of the body (62.7 %) is made of steel with tensile strength 220 to 440 MPa*. The rigidity of the body has a positive effect on the driving characteristics of the new Škoda Rapid, which is no longer affected by the vehicle body twisting when cornering or driving on uneven terrain. * Yield strength Material strength – Rp0.2 (MPa) Weight portion (%) 200 MPa 220–420  MPa 700–850  MPa 1000–1200  MPa 42.88 % 46.95 % 1.63 % 8.54 %SP95_12SP95_12The static torsional rigidity of the body corresponds to the second generation of the model Octavia, the evolution in comparison with the first generation of the model Octavia is clearly noticeable, see table. Model Rapid Octavia II Octavia I Body elements for passenger safety:by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted – The progressively deformableProtected front and rear part of the vehicle ensure an optimal course of deformation unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability of the body so that the kinetic energy is to absorbed most efficiently. with respect the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� – Rigid body structure especially around the passenger area. – Robust door sills and side pillars. – Side reinforcements in the doors to increase the protective effect in the event of a side impact. – Mounting of the drive train to prevent penetration into the passenger compartment of the vehicle.Year of test 2012 2004 2000Static torsional rigidity [kNm/°] 17.12 17.08 12.12The vehicle front part (shock absorbers, headlights, hood and its attachment, engine parts) is constructed in accordance with the requirements for pedestrian protection, with the aim to minimise the consequences of a collision.GB15 3.2 Progressively deformable vehicle front partOn the Škoda Rapid, the radiator grille is a design whole with the shock absorber. It is therefore no longer connected to the engine hood, as has been the case on the previous models. The bumper is designed to minimise damage to the relevant parts below the vehicle mask under conditions of a low speed impact.The following passive vehicle safety components are located below the front bumper of the Škoda Rapid: – lower grid – shock absorber – reinforcement of the front bumper Lower grid and shock absorber The lower grid and the shock absorber are designed in accordance with the requirements for pedestrian safety. In the event of a collision at low speed, the grid prevents bumper deflection. (Thus, the pedestrian is no longer pulled under the vehicle.) The damper is made of polypropylene foam and is secured to the cross member of the bumper. It absorbs the kinectic energy generated during the collision. (It helps reduce the impact in case of any collision of the pedestrian with the vehicle.) Reinforcement of the front bumper The peripheral areas of the front bumper reinforcement are specifically designed to deform in response to an impact. The reinforcement absorbs most of the kinetic energy generated during a frontal impact. It effectively reduces the risk of damaging the motor vehicle component parts and in particular the passenger compartment.SP95_32Reinforcement of the front bumperProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Malleable reinforcemant area of the front bumper16GB Module of the front sideReinforcement of the front bumperSP95_31Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Malleable reinforcemant area of the front bumperShock absorber (foam filling)Lower bumper strutFront bumper with radiator grilleGB17 4. Engines4.1 Overview of the engineŠkoda Rapid. Four petrol and two diesel units. The engines are supplemented with a five- and six-speed manual gearbox or a seven-speed automatic transmission 0AM (DSG). The following tables show specific engine combinations with the individual gears.Petrol engines 1.2 MPI/55 kW 1,2 TSI/63 kW 1,2 TSI/77 kW 1.4 TSI/90 kW5-speed manual gearbox6-speed manual gearbox – –7-speed automatic gearbox – – –– – –Diesel engines 1.6 TDI/66 kW 1.6 TDI/77 kW5-speed manual gearbox6-speed manual gearbox – –7-speed automatic gearbox –CamshaftsProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Piston Timing chain Counterweight of crankshaft Conrod CrankshaftDrive chain of oil pumpCounterweight of balancing shaftOil pumpSP95_33Petrol engine 1.2 MPI/55 kW18GB 4.1.1 Petrol engine 1.2 MPI/55 kWThe 1.2 MPI/55 kW engine is the third stage of development of the proven three-cylinder HTP design with twelve valves, four per cylinder. Its predecessor, with the power outputs of 47 and 51 kW, ensures a successful driving performance of the first and second generation Škoda Roomster. The cylinder block and cylinder head are made of aluminum alloy. The drive of the two camshafts and the oil pump is ensured by the maintenance-free chain transmission. The valve control is equipped with hydraulic valve clearance compensation. The balance shaft ensures a smooth running of the engine.Power output and torque diagramTechnical data 1.2 MPI/55 kW Design petrol engine, production engine, SOHC, liquid-cooled, front, transverse mounted 3 1198 cm3 76.5 mm 86.9 mm 55 kW at 5400 rpm rpmNumber of cylinders Displacement M (Nm) P (kW) Bore Stroke Max. power output: Compression ratio Charge Ignition Lubrication n (rpm) P – Power M – Torque n – Engine speedSP95_13Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted torque 112 Nm at 3750 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S.Max. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�10,5 : 1electronic multi-point fuel injection MPI electronic, non-contact, controlled by control unit pressure lubrication with full-flow oil filter unleaded petrol (min. octane number 95 (91)* EU 5Fuel Emission standard* Use of petrol with a low octane number may lead to a reduction in the engine performance.GB19 4.1.2 Petrol engine 1.2 MPI/63 kW and 1.2 TSI/77 kWThe 1.4 TSI/92 kW engine, known from the model Škoda Superb II, is the predecessor of the 1.2 TSI engine. The 1.2 TSI engine is offered in two versions with different power outputs. It is a modern four-cylinder unit with two valves per cylinder. The engines are charged by a turbocharger and thus have good dynamic properties with high torque at low rpm (see graphics on page 21). The engine management system generates two power outputs of 63 kW and 77 kW from a displacement of 1.197 cm 3. The cylinder block and cylinder head are made of aluminum alloy. The drive of the camshaft and the oil pump is ensured by the maintenance-free chain transmission. Thanks to its smaller number of components, the dual-valve control saves weight and reduces friction losses. The exhaust valves are filled with sodium.SP95_28Technical data 1.2 TSI/63 kW * and 1.2 TSI/77 kW ** Design petrol engine, production engine, SOHC, charged with turbocharger, liquid-cooled, with direct fuel injection, the front mounted transversely 4 1197 cm3 71 mm 75.6 mm 63 kW at 4800 rpm * 77 kW at 5000 rpm ** 160 Nm at 1500-3500 rpm * 175 Nm at 1550-4100 rpm ** 10,0 : 1 electronically controlled direct fuel injection MPI electronic, non-contact, controlled by control unit pressure lubrication with full-flow oil filter unleaded petrol (min. octane number 95 (91)* EU 5NumberProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted of cylinders unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� DisplacementBore Stroke Max. power output: Max. torque Compression ratio Charge IgnitionSP95_29Lubrication Fuel Emission standard* Use of petrol with a low octane number may lead to a reduction in the engine performance.20GB Power output and torque diagrams - Juxtaposition of the maximum torque range The engine management system of the 1.2 kW TSI/77 kW engine generates a high power output across a wider range of engine revs, whereby the unit reaches its maximum torque.n (rpm)n (rpm) P – PowerProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted M – Torque unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information this document. Copyright by ŠKODA AUTO A. S.� n – in Engine speedSP95_18GBM (Nm)P (kW)M (Nm)P (kW)21 4.1.3 Petrol engine 1.4 MPI/90 kWThe four-cylinder cast iron block was the first representative of the "downsized" engine concept. Reduction in engine displacement, smaller inertial mass, charging and direct fuel injection are the governing parameters of this unit. Thus, a high degree of efficiency and a high performance ratio as well as low fuel consumption is achieved. The model Rapid has a maximum power output of 90 kW.SP95_35Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Power output and torque diagramTechnical data 1.4 TSI/90 kW Design petrol engine, production engine, 2 x SOHC, charged with turbocharger, liquid-cooled, with direct fuel injection, the front mounted transversely 4 1390 cm3 76.5 mm 75.6 mm 90 kW at 5000 rpm 200 Nm at 1500 - 4000 rpm 10,0 : 1 electronically controlled direct fuel injection MPI electronic, non-contact, controlled by control unit pressure lubrication with full-flow oil filter unleaded petrol (min. octane number 95) EU 5Number of cylinders M (Nm) P (kW) Displacement Bore Stroke Max. power output Max. torque Compression ratio Charge Ignition n (rpm) P – Power M – Torque n – Engine speedSP95_17Lubrication Fuel Emission standard22GB The 1.4 TSI/90 kW engine is a turbocharged petrol engine. The exhaust gas turbocharger is designed to produce a high torque, even in the lower speed range. Air is sucked into the engine through the air filter, it is then compressed by the turbocharger compressor wheel. The liquid cooler, which limits the temperature of the compressed air, is integrated in the suction line and has a max. inflation pressure of 0.18 MPa.Turbines of the turbocharger compressorSuction line Exhaust pipeSP95_39Section through the turbocharger of the 1.4 kW TSI/90 kW engineProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB23 4.1.4 Diesel engine 1.6 TDI CR DPF/66 kW and 1.6 TDI CR DPF/77 kWThe 1.6 ltr. TDI/66 kW and 77 kW diesel engines are fitted with a modern Common Rail injection system, comprising four valves per cylinder, which are operated each with a pair of cams. - Turbocharger with variable vane geometry The optimally set combustion process, the exhaust gas recirculation and the solid particle filter (DPF) together improve the cleanliness of the exhaust gases.– Four-valve technology –C  ylinder block made out of cast iron, cylinder head made out of aluminium alloy – Forged crankshaft with four counterbalances – Fuel injection system, Common Rail – With piezo-valve controlled injection units – Injection pressure up to 160 MPa – Metal glow plugs –Suction lines made ​​ of plastic – Solid particle filter with oxidation catalytic converterTechnical specifications 1.6 TDI/66 kW * and 1.6 TDI/77 kW ** Design diesel engine, production engine, 2 x SOHC, charged with turbocharger with variable vane geometry, liquid-cooled, with highpressure fuel injection, the front mounted transversely 4 1598 cm3 79.5 mm 4200 rpm * 77 kW at 4400 rpm ** 230 Nm at 1500-2500 rpm * 250 Nm at 1500-2500 rpm ** 16,5 : 1 electronically controlled highpressure fuel injection with Common Rail system pressure lubrication with full-flow oil filter Diesel fuel EU 5SP95_20Number of cylinders Displacement BoreStroke 80.5 mm Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability Max. power 66 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S. � kW at Injection valve High-pressure fuel accumulator output: Max. torque Compression ratio ChargeLubrication Fuel Emission standardHigh-pressure fuel pumpSP95_4024GB Power output and torque diagramsn (rpm)SP95_16Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�n (rpm) P – Power M – Torque n – Engine speedSP95_15GBM (Nm)P (kW)M (Nm)P (kW)25 5. Gearbox5.1 Overview of the gearboxes, tables with gear ratiosGearboxes in combination with petrol engines A specific gearbox was assigned to each of the four petrol engines fitted to the model Škoda Rapid. The 1.2 MPI/55 kW and the 1.2 kW TSI/63 kW are equipped with the manual five-speed gearbox MQ200. For each of the two engines, the gear ratios in the gearboxes are set differently. The 1.2 kW TSI/77 kW engine is equipped with the six-speed manual gearbox 02U (MQ200-6F) with finer gradation. The 1.4 TSI/90 kW engine of the new model Škoda Rapid is exclusively equipped with the seven-speed automatic gearbox 0AM. Gearbox of the modelŠkoda Rapid in combination with petrol engines - Transmission characteristics 02TQ (MQ200-5F)1.2 MPI/55 kW02TM (MQ200-5F)1.2 TSI/63 kW02U (MQ200-6F)1.2 TSI/77 kW0AM (DQ200-7F)1.4 TSI/90 kW 4.80*/3.429**/4.5***Differential gearAxle drive ratio4.929 3.77 2.10 1.28 0.88 0.67 – – 3.183.625 3.77 1.95 1.28 0.93 0.74 – – 3.183.933 3.62 1.95 1.28 0.93 0.74 0.61 – 3.181st gear 2nd gear 3rd gear 4th gear 5th gear 6th gear 7th gear reverse gear3.5 2.09 1.34 0.93 0.97 0.78 0.65 3.72Gear ratio of differential gear for the: *1st, 2nd, 3rd and 4th gear; **5th, 6th and 7th gear; ***for reverse gear.Gearboxes in combination with diesel engines The five-speed manual gearbox MQ250 with high torque capacity is fitted to the 1.6 TDI diesel engines. The automatic gearbox 0AM can also be selected for the 1.6 TDI/66 kW engine. Gearbox of the modelŠkoda Rapid in combination with diesel engines - Transmission characteristics 02R (MQ250-5F) Differential gearAxle drive ratio0AM (DQ200-7F)kW and 1.6 for TDI/77 kW 1.6 TDI/66 kW Protected1.6 by TDI/66 copyright. Copying private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability 4.80*/3.429**/4.5*** 3.158 of information in this document. Copyright by Š with respect to the correctness KODA AUTO A. S.�1st gear 2nd gear 3rd gear 4th gear 5th gear 6th gear 7th gear reverse gear3.78 2.12 1.27 0.86 0.66 – – 3.603.5 2.09 1.34 0.93 0.97 0.78 0.65 3.7226GB 5.2 Mechanical five-speed gearbox 02T (MQ200-5F) and 02R (MQ250-5F)Proven mechanical five-speed gearboxes are also used in other models of Škoda Auto. The 02T gearbox, also known as MQ200, is designed to handle up to 200 Nm of torque. The 02R gearbox, also known as MQ250, has a similar design. This gearbox can handle up to 250Nm of torque and is fitted to the model Škoda Rapid. Characteristics of the gearboxes 02T and 02R – Five forward gears + one reverse gear – Hydraulic clutch actuation – The mechanical transmission and the final drive form a unity – To reduce the internal friction, the toothed gears of the individual gears are mounted on needle bearings – Dual synchronisation of the 1st and 2nd gears – Inner shifting, i.e. swivellable shift forks, the selector shaft is inserted into the gearbox from above – Lifelong oil filling for the gearbox (no oil change is necessary) – On the 02T gearbox the oil level and oil flow control screw is located in the area of the differential gear, whereas on the 02R gearbox, it is located next to the gearbox housing coverSP95_25SP95_265.3 Mechanical six-speed gearbox 02U (MQ200-6F)The design of the 02U six-speed gearbox is similar to that of the 02T and 02R five-speed gearboxes. This is a double-shaft transmission, the engine of the drive and output shaft is mounted in the same housing together with the differential gear. The synchronisation mechanism of the 1st and 2nd gears is mounted on the output shaft, whereas it is located on the drive shaft for the 3rd, 4th, 5th and 6th gears.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP95_100GB27 5.4 Automatic gearbox 0AM (DQ200-7F)The automatic dual-clutch gearbox 0AM is composed of two transmission structures. This dual-clutch gearbox offers the function of two manual gearboxes in one, by contrast, it uses two clutches, but has no clutch pedal. The transmission has two dry clutches. Both clutches are actuated by the mechatronic control system depending on the selected gear.The Škoda Rapid range features the 1.4 TSI/90 kW petrol engine and the 1.6 TDI/66 kW diesel engine, both available with the automatic gearbox 0AM.Features of the automatic gearbox 0AM – Dry dual-clutch – Separate oil circuits for the transmission and the mechatronics – Mechatronic control system – Possibility of manual gear selection – High switching speed – One clutch controls the odd gears, while the other controls the even gears and the reverse gears – Max. transmitted torque 250 NmProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP95_38Important: You can find detailed information on the diagnosis of the automatic gearbox 0AM in the Self-Study Programme No. 94.MechatronicsDual-clutchSP95_3028GB The gearbox has two independent oil circuits, each containing different types of oils: – Oil circuit for mechanical gearbox – Oil circuit of the mechatronics module The oil filling of the mechanical gearbox part ensures the lubrication of the shafts and toothed gears during shifting. The mechatronics module oil circuit contains special hydraulic oil. The oil pressure is built up by a pump. The clutch mechanism is actuated and the gears are shifted through the pressurised fluid in the hydraulic oil circuit. Characteristics of the automatic gearbox 0AM Weight with clutch Max. torque Gear ratios Spread Operating modes Oil volume in the gearbox Oil volume in the mechatronics 70 kg 250 Nm 7 forward gears, 1 reverse gear 8,1 Automatic and Tiptronic 1.7 ltr. - G 052 171 1 ltr.Transmission structure no. 2,Clutch K2Clutch K1Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP95_41Transmission structure no. 1,Schematic diagram of the A0M gearboxGB29 6. Chassis6.1 Design of the frame assemblyThe model Škoda Rapid and all other models of the Škoda range feature a modular frame assembly with identical elements. The McPherson front axle fitted to the model Škoda Rapid was taken over from the previous Fabia ll. The rear crank axle with the trailing arms is the same as on the Škoda Roomster.Braking and stability systems ABS und ESP Tyre pressure monitoring TPM+ Electronic differential lock (EDL)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Dual-circuit brake system with diagonal arrangement (brake circuits in X-shape) and with vacuum brake boosterDisc brakes on the front axleRack and pinion steering with electrohydraulic booster, the same type that is used in the models Fabia and Roomster30GB Drum or disc brakes on the rear axle (depending on engine and equipment)SP95_21The rear crank axle is the same as on the Škoda RoomsterThe modified McPherson front axle was taken over from the model Škoda Fabia IIProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB31 6.2 Front axleThe front axle which is fitted to the Škoda Rapid was taken over from the model range Škoda Fabia II. The kinematically independent suspension of the McPherson type was used for the powered front wheels. On each side of the axle is a wishbone and a damper unit. The axle of the telescopic damper serves as the top centre of rotation of the wheel suspension - it fulfills the function of the axle kingpin.Characteristics of the front axle: – Independent suspension of the front wheels with good stability – Double-row angular contact ball bearing hub – Disc brakes with inner coolingDamper unitAnti-roll barSteering gearTrack control armSP95_23Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Axle unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does notbody guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�32GB 6.3 Rear axleThe Škoda Rapid is equipped with a crank axle already well known from the model range Škoda Roomster. (The same principle of the wheel suspension applies to the model Škoda Octavia of the first generation with front-wheel drive and the Škoda Superb of the first generation.) It is an axle, consisting of two trailing arms connected by a transverse torsion bar suspension. On the front side, the axle body is connected to the vehicle body by two rubber-metal bearings. In the bottom part, the axle springs are anchored in steel beds which are fixed to the trailing arms. The top of the spring supports the frame side rail of the body.Characteristics of the rear axle: – Crank axle, consisting of two trailing arms connected by a torsion bar – The arms have coil springs and telescopic dampers – Depending on the engine version and equipment, drum or disc brakes are fitted to the rear axleTelescopic dampersProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Coil spring Anti-roll barSP95_24Torsion barRubber metal bearing Trailing armGB33 6.4 BrakesThe ŠKODA Rapid features a hydraulic dual-circuit brake system with diagonal arrangement and a vacuum brake booster. The front axle of the model Škoda Rapid is equipped with disc brakes with single-piston floating brake brackets. On the 1.2 MPI/55 kW and 1.2 TSI/63 kW engines, disc brakes with the diametre of 256 mm (thickness 22) are fitted to the front axle, all other (stronger) engine versions are fitted with brakes with a larger diametre - 288 mm (thickness 25). Both types of front disc brakes have hollow brake wheels with inner cooling. The rear axle is equipped with drum or disc brakes, depending on the engine version and equipment. The drum brakes have a diametre of 228 mm and a friction surface with a width of 32 mm. The disc brakes have a diametre of 230 mm (thickness 9 mm). Front brakes Engine version: 1.2 MPI/55 kW 1,2 TSI/63 kW 1,2 TSI/77 kW 1.4 TSI/90 kW 1.6 TDI/66 kW 1.6 TDI/77 kW – – – – Disc brakes (ø 256 × 22) Disc brakes (ø 288 × 25) – – – – – – Rear brakes Drum brakes (ø 228 × 32) Disc brakes (ø 230 × 9) – –The rear drum brake has been redesigned; for the assembly only use the appropriate assembly devices T30114 and T30115. T30115 The assembly tool T30115 must be used for opening the brake shoes so that the self-adjusting device can be mounted. T30114The device T30114 must be used to mount the brackets which secure the brake shoes.SP95_84aSP95_84b34Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB 6.5 Wheels and tyresSteel wheels with full-wheel hub caps: Hub cap Metis 14” Wheels Tyres: 175/70 R14 Hub cap Dakara 15” Wheels Tyres: 185/60 R15SP95_43SP95_44Light alloy wheels Carme 15” Wheels Tyres: 195/55 R15 Dione 16” Wheels Tyres: 215/45 R16SP95_45SP95_46Antia 16” Wheels Tyres: 215/45 R16Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Camelot 17” Wheels Tyres: 215/40 R17SP95_82SP95_47Exklusiv 17” Wheels Tyres: 215/40 R17SP95_48GB35 7. Vehicle illumination7.1 HeadlightsThe headlight ensemble with four lightbulbs is grouped into three separate chambers. The exterior headlight has a halogen lamp H 7 and is designed for the low beam. The headlight closer to the vehicle centre contains two light bulbs: The light bulb for the daylight driving light/main beam H15 and the contour lighting with the light bulb W5W. The H15 is a dual filament light bulb, the 55 W filament is used for the high beam and the 15 W filament for the daylight mode. The last light is the lower inner headlight - a direction lamp equipped with the light bulb PY1W. Contour light daylight driving light/main beamSP95_51Front turn signalLow beam7.2 Daylight driving light function - daylight modeThe daylight driving lights are switched on when the engine is switched on. The 15 W filament of the light bulb H15 and the light bulb of the contour light are used for the daylight mode.daylight driving lightSP95_53aLow beam modeSP95_53bProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP95_97SP95_99The light switch for daylight driving light is set to position 0. The switch under the cover of the fuse box in the instrument panel is used for the activation/deactivation of the daylight mode. This switch is not present on models ŠkOdA Rapid which are equipped with the START-STOP system (see description of daylight driving light activation with START-STOP system on the next page of this brochure).36GB Deactivation of the daylight mode on models Škoda Rapid with START-STOP system The deactivation is carried out in the following steps: – Switch off the ignition – Press the turn signal lever towards the steering wheel, at the same time push it down and hold it in position – Switch on the ignition and wait until the left turn signal flashes 4x – Switch off the ignition - an acoustic signal sounds, confirming the deactivation of the daylight mode – Release the turn signal lever The activation of the daylight mode is similar to the deactivation, with the difference that the turn signal lever must be pressed towards the steering wheel and simultaneously pushed upwards. The right turn signal flashes, thus confirming the activation. Specification of the light bulbs Low beam Daylight driving light/main beam Front contour light Rear contour light Front and rear turn signals Front fog light Rear fog and contour lights Brake and contour light Third brake light H7 12V/55W H15 12V 15/55W dual fiber W5W 12V/5W W3W PY21W H8 12V/35W P21/4W dual filament P21/4W dual filament LED7.3 Fog lights with Corner function (turn signals)The fog lights are installed in the spoiler area of the lower bumper and are equipped with the halogen bulb H8. In addition, besides their standard function the fog lights also have the Corner function, which is implemented on the relevant side by the individual lighting of the right or left fog light depending on the steering wheel position and the turn signal which is switched on. When the reverse gear is engaged, both front fog lights are switched on. If the fog lights are switched on, the Corner function is no longer active.SP95_507.4 Rear combination lightProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The rear combination light is integrated into the wing area. You can find the third brake light on the fifth door of the model Škoda Rapid. The rear combination light is designed in the traditional Škoda way in the shape of the letter C. In total there are six light bulbs in the lamp: – T he light bulb of the rear turn signal – T he dual filament light bulb of the rear fog and contour light – T he dual filament light bulb of the brake and contour light – Tail light bulb – Two light bulbs for the individual contour lightsSP95_52GB37 8. Airbag system8.1 AirbagsOn the model Škoda Rapid, the airbag system consists of the following components: – 6x Airbag 1) Driver's front airbag 2) Front passenger front airbag – can be switched off 3) Driver's side airbag 4) Front passenger side airbag 5) Head airbag for left seats 6) Head airbag for right seats – A irbag control unit with integrated impact sensors – external impact sensors – airbag system warning light on the instrument panel – front passenger airbag switch – front passenger airbag OFF warning light – wiring harness Sensors integrated in the control unit Three sensors are components of the control unit: – CISS sensor (Crash Impact Sound Sensing) – front impact acceleration sensor – side impact acceleration sensor The CISS sensor can detect a frontal impact in the shortest period of time. The acoustic impact wave, which is measured by the sensor, is already perceived before the deceleration of the vehicle, which is monitored by the acceleration sensors. The acceleration sensors operate on the principle of negative acceleration of the vehicle, the first acceleration sensor detects the frontal impact (together with the CISS sensor), the other sensor then detects the side impact. Airbag system warning light on the instrument panelSP95_92Side airbag on the driver's sideExternal sensors The airbag system of the model Škoda Rapid has four external acceleration sensors which evaluate the lateral acceleration of the vehicle. The sensors are connected to the airbag control unit via a wiring harness. On both sides of the vehicle, one sensor is installed in the bottom area of the B-pillar and another one in the bottom area of the C-pillar. These sensors receive the information of all side impacts. Then the control unit activates the corresponding airbag based on the programmed algorithm, which evaluates the signals from the external sensors as well as the signal of the acceleration sensor for side impact which is directly integrated in the control unit.The side airbags are integrated into the upholstery of the front seat backrests.Front passenger side airbagSP95_9138Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB 8.2 F  ront passenger airbag deactivationThe front passenger front airbag can be deactivated using the switch installed in the storage compartment in the instrument panel on the front passenger side. The switch is operated with the ignition key.SP95_86Front airbag on the front passenger side Front airbag on the driver's sideSP95_89The deactivation of the front passenger airbag is displayed on the central display of the instrument panel by the lighting-up of the orange-coloured message OFF with pictogram.Passenger AIR BAGProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP95_85SP95_88Head airbag for the left seatsHead airbag for the right seatsSP95_90GB39 9. Antennas, radio and MDI9.1 Antenna systemThe model Škoda Rapid is equipped with two basic antenna systems that are designed for the needs of specific groups of installed devices.9.1.1 Antenna system for radio units with one tunerVehicles with AM/FM receiver with one tuner (Radio Blues) are equipped with the antenna system with one antenna, which is installed in the rear area of the vehicle roof. The antenna rod is removable. The signal is transmitted from the antenna to the AM/FM receiver via a coaxial cable, which also transmits the received radio signal to the (12 V) active amplifier located in the antenna base.Active amplifier in the antenna baseSP95_64Radio BluesSP95_63Fixing nutRemovable rod9.1.2 Antenna system for radios with 2 tuners, navigation and GSMVehicles with a dual tuner-AM/FM receiver (Swing, Amundsen+) are equipped with the dual-antenna system. The first rod antenna is installed in the rear area of the vehicle roof. The antenna rod is removable. The signal is transmitted from the antenna to the AM/FM receiver via a coaxial cable, which also transmits the received radio signal to the (12 V) active amplifier. The amplifier is located in the antenna base. The rear window heater functions as a second antenna. The second antenna is used as a signal source for the second radio tuner.Radio SwingProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted SP95_62 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability system with respect to the correctness of information Navigation in this document. CopyrightAMUNDSEN+ by ŠKODA AUTO A. S.�SP95_6140GB Primary FM roof antenna with integrated navigation antennas The primary antenna tunner AM/FM and the GPS navigation antenna are integrated in this type of roof receiver. The roof antenna base houses the active signal amplifiers of the AM/FM antenna (12 V) and the GPS antenna (5 V).Active amplifier in the antenna baseRemovable rodSP95_65Fixing nutSecondary FM antenna The antenna located on the luggage compartment lid makes use of the rear window heating, which is supplied with voltage for heating the rear window. The voltage glow of the resistor network is isolated on both poles by FM trap circuits for the purpose of proper functioning of the secondary FM antenna. The signal is supplied to the FM receiver via the impedance transformer (R54) by means of coaxial cable. Arrangement of isolators and impedance transformer, see illustration.Poles to connect the connecting cables for heating the rear window. The isolators are components of the connecting cables.Positioning of the impedance element R54 in relation to the rear window Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted wiper unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability motorwith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP95_83SP95_66The impedance member R54 connecting the antenna to the radio of the vehicleGB41 9.2 MDI interface – Media Device InterfaceMDI interface can be installed as optional equipment in certain Škoda Rapid models. MDI interface is composed of the input USB port and the AUX-IN input. The vehicle user can connect external memory sticks via the USB port and directly play music. The MDI interface is connected to the radio of the vehicle or with the navigation via the control unit for external multimedia devices J650. – Songs and their play modes, the display of song names and artists can be selected using these devices. The USB port is connected to the control unit by means of the Mitsumi plug cable. The control unit J650 is installed below the storage compartment on the front passenger side.USB port connection with Mitsumi plugSP95_55J650 control unit for external multimedia devicesProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP95_54Version of USB port and AUX sockets on the centre panelThe input plug, USB with digital signal and the analogous socket AUX-IN are installed on the centre panel below the air conditioning system control.Digital USB inputSP95_56Analogous input AUX-IN42GB 10. Units and warning lights10.1 Instrument panelThree versions of composite instrument panels can be mounted in the model Škoda Rapid depending on the vehicle equipment.10.1.1 Basic design of the instrument panelThe basic design of the composite instrument panel is assigned to the equipment Active. The panel has two analogous displays - speed display (left) and speedometer (right). The display in the centre shows the following functions: – Clock – Total and daily mileage – Service intervals – Fuel display –G  ear recommendationSP95_5910.1.2 Instrument panel with central multi-function display MFDThis version of the composite instrument panel is assigned to the equipment Ambition. Compared with the basic version, it is equipped with the central display MFA with onboard computer. The central display MFA shows the same functions as the display of the basic design of the instrument panel. In addition, the following information is displayed: – Function of the onboard computer – Values ​​ of the automatic gearbox (on models which are equipped with this gearbox)unless authorised by ŠKODA A. S. ŠKODA AUTO A. S. does guarantee or accept any liability The instrument panel is also distinguishable byAUTO its different design and itsnot chrome-plated frames of analogous with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� displays, in contrast to the basic version. Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permittedSP95_60GB43 10.1.3 Instrument panel with central Maxi DOT displayThis version of the composite instrument panel is assigned to the equipment Elegance. The instrument panel has four analogous displays. The cooling liquid temperature indicator is located in the area of ​​ the speed display. The fuel display can be found in the lower part of the tachometer. The central Maxi DOT display has additional setting options for the electronic systems, in contrast to the range of vehicles with fewer equipment options. The analogous displays are housed in chrome frames.Turn signal warning light Mileometer Rev counter Maxi DOT displayPosition of the warning lights in the area of the speedometerPosition of the warning lights in the area of the mileometerSP95_57Coolant temperature senderFuel display Operating buttonsMaxi DOT display In addition to the information about the current vehicle state and the operating modes, the central Maxi DOT display shows the following information, see previous page of this manual: – Multifunction display – Radio – Telephone – Navigation system – Automatic gearbox – Information about devices connected by means of MDISP95_58Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�44GB 10.2 Warning lightsOn all versions of the instrument panels, the warning lights are installed in the area of the speedometer and tachometer, they