TECHNICAL DOCUMENTATION
SSP 072 Škoda Yeti Vehicle presentation part ll

This PDF is currently unavailable.
Read document text
ServiceŠkodaYetiVehicle presentation part ll72Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Self-study programmeThe functional design of the Yeti model, which gives the impression of lightness despite its ruggedness, meets all the requirements for an excellent overview of the body, with higher positioned seats while offering varying use of the vehicle.The Yeti also masters demanding transport tasks by means of the variable luggage compartment and can accommodate a load of up to 1760 litres after removing the rear seats. The balanced concept Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted the AUTO chassis fulfi ls guarantee the promise of its unless authorised by development ŠKODA AUTO A. S. of ŠKODA A. S. does not or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� design: Sheer driving pleasure combined with dynamic performance.2GBContentsSafety of the occupantsAirbags4 4 9 9 10 10 14 16 23 25 28 31 32 35 40 43 44 45Heating and air conditioning systemVentilation systemElectrical unitsControl units in the vehicle Connection of the CAN bus data logger in the vehicle PA parking aid Main headlights Adaptive main beam lighting system AFS Dash panel MDI interface Radio and navigation systems Telephone preinstallation GSM II Antenna concept Steering wheels Control of the outside illumination of the vehicle Trailer couplingProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�You will find the instructions for the installation, removal, repair, diagnosis and detailed user information in the repair manual, the diagnosis unit VAS 505x and in the onboard literature. The time for going to press was on the 05/2009. This brochure is not subject to update.GB3Safety of the occupantsAirbag systemThe airbag system consists of: - the airbags - the central control unit - external crash sensors - airbag warning light in the dash panel - switch for front passenger airbag - warning light for switching on/off the front passenger airbag - electrical installation• driver's front airbagProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�• driver's knee airbag• driver's and front passenger side airbag4GB• front passenger front airbag - can be switched off• head airbags• rear side airbagsProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�• acceleration sensor in the lower part of the "C-pillar"SP72_01• pressure sensor in the front doorsGB5Safety of the occupantsActivation system of the airbagsThe airbag activation system consists of a central control unit and four external crash sensors for detecting a side collision. Control unit of the airbags The control unit is located in the front area of the centre tunnel in the vehicle floor. There are three crash sensors integrated in the control unit. Two sensors operate according to the principle of negative vehicle acceleration (acceleration sensors), one for detecting a frontal collision, the other one for detecting a side collision. The third and newly employed sensor, the so-called CISS sensor (Crash Impact Sound Sensing), is used as an additional sensor for the detection of a frontal collision. It operates according to the principle of measuring the acoustic value of the impact force.CISS sensor The CISS sensor uses the sound wave which occurs in the solid structure of the chassis when it is deformed during an impact. After the signal has been measured, the algorithm of the control unit can determine the type of impact and can trigger the impulse which deploys the airbags and the seat belt tensioners. The CISS sensor replaced one acceleration sensor in the airbag control unit (for example on the Superb ll model, the signal of three acceleration sensors, two of which are integrated in the control unit, is required in order to deploy an airbag during a frontal collision). This means that an acceleration sensor, which detects the collision strength and the vehicle deceleration as well as the CISS sensor, which detects the acoustic Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised byfor ŠKODA AUTO A. S. ŠKODA AUTO A. S. doescollision. not guarantee or accept any liability wave, are used the detection of a frontal In order to deploy with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� an airbag, the acceleration signal as well as the noise signal must be measured. The sensor detects acoustic vibrations in the range of 400 Hz - 16 kHz. When using the CISS sensor, it is not necessary to use an additional acceleration sensor at the front end as on the Superb ll model.External crash sensors Two types of crash sensors are connected to the airbag control unit. These are pressure and acceleration sensors which transmit unprocessed data to the control unit. Pressure sensors, which are housed in the "dry" area of the driver and front passenger door, are used for detecting a side collision. An additional acceleration sensor which is located in the lower part of the C-pillar and detects a side collision which does not deform the front doors, must be used in order to detect a collision on vehicles with rear side airbags, respectively head airbags.6GBSP72_07Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB7Safety of the occupantsSwitching off the front airbag for the front passenger seatThe front airbag for the front passenger seat can be switched off by means of the switch located in the glove compartment in the instrument panel of the front passenger seat, using the ignition key. An ON/OFF warning light for airbag is incorporated in the centre part of the instrument panel in the Škoda Yeti for signalling that the front airbag for the front passenger seat is switched on/off by means of the switch. If the front passenger front airbag was switched off using the switch: - if the airbag warning lamp lights up on the dash panel for approx. 4 s after switching on the ignition - if the yellow warning lamp airbag OFF lights up in the centre part of the dash panelSP72_08After activating the front airbag for the front passenger seat by means of the switch, the yellow warning lamp airbag ON lights up after switching on the ignition. After switching on the ignition, the lamp goes out 65 s Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted later. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The ON/OFF warning lamp for airbag is actuated by the airbag control unit and the onboard unit BCM.After switching off the front passenger front airbag, the side and head airbag of the front passenger seat and the seat belt tensioner remain activated.8GBHeating and air conditioning systemAir distribution in the vehicleThe air lines in the Yeti model are adapted to the interior and the glazing. The air ventilation system enables to easily and rapidly achieve the desired thermal comfort in the vehicle. The air vents in the area of the instrument panel have the classic arrangement as in the other Škoda vehicles, the air flowing towards the rear seats is directed below the front seats or around the reverse side of the Jumbobox, in the event the vehicle is fitted with the Jumbobox.SP72_02Ventilation systemProtected by copyright. Copying forsystem private or commercial purposes, in part or in whole, is not permitted The Yeti model is offered with a ventilation and heating of three levels: unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�- Heating and ventilation system - Semiautomatic air conditioning and heating system Climatic - Fully automatic two-zone air conditioning and heating system Climatronic The function and the operations of the Climatic and Climatronic ventilation systems are the same on the Octavia II and Superb II models.GB9Electrical unitsOverview of the control units in the ŠkodaYetiFront view21 30 27826 13 29 31 18 1 5 10 32 6 24 4 9 19 28 15 23 33 12 11 7210Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�10GBLegend: 1 2 3 4 522Engine control unit Automatic gearbox control unit Selector lever sensor control unit of the automatic gearbox (see pages 12, 13) Power-assisted steering control unit ABS/ESP control unit Airbag control unit All-wheel drive control unit (Haldex) Park assist control unit (PA)/parking aid (PDC) Control unit of the bi-xenon headlights with cornering light Power device of the bi-xenon headlights (right/left) Control unit of the dash panel and the immobiliser Control unit of the driver door Control unit of the front passenger door Trailer coupling control unit6 7 8 9 101411 12 13 142515 Onboard supply control unit (BCM) 16 Climatronic/Climatic control unit (see pages 12, 13) 17 Steering column electronics control unit (see pages 12, 13) 18 Radio/radio navigation system control unit 19 Control unit for external multimedia devices 20 Control unit for mobile phone operation (see pages 12, 13)SP72_4321 Control unit of the electrically controlled roof windowProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted roof window unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�22 Control unit of the electrically driven sun blind for the 23 Amplifier (sound system)24 Additional heating control unit 25 Control unit of the left, rear door 26 Control unit of the right, rear door 27 Light and rain sensor 28 Control unit of the windscreen wipers 29 Auxiliary alarm horn 30 Interior monitoring sensor and vehicle inclination sensor 31 Multi-function steering wheel control unit 32 GATEWAY 33 Control unit of the seat adjustment memoryGB11Electrical unitsOverview of the control units in the ŠkodaYetiRear view10 27 1 24 5213013 28 2 10 11 31 16 15Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted 3 accept any liability unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�1826172012 2333257 1412GBLegend: 1 2 3 4 5 6 7 8 922Engine control unit Automatic gearbox control unit Selector lever sensor control unit of the automatic gearbox Steering column control unit (see pages 10, 11) ABS/ESP control unit Airbag control unit (see pages 10, 11) All-wheel drive control unit (Haldex) Park assist control unit (PA)/parking aid (PDC) Control unit of the bi-xenon headlights with cornering light (see pages 10, 11) Power device of the bi-xenon headlights (right/left) Control unit of the dash panel and the immobiliser Control unit of the driver door Control unit of the front passenger door Trailer coupling control unit10 11 12 13 14815 Onboard supply control unit (BCM) 16 Climatronic/Climatic control unit 17 Steering column electronics control unit 18 Radio/radio navigation system control unit 19 Control unit for external multimedia devices (see pages 10, 11) 20 Control unit for mobile phone operation 21 Control unit of the electrically controlled roof window 22 Control unit of the electrically driven sun blind for the roof window 23 Amplifier (sound system) 24 Additional heating control unit 25 Control unit of the left, rear door 26 Control unit of the right, rear doorSP72_4427 Light and rain sensor 28 Control unit of the windscreen wipersProtected by copyright. Copying private or commercial in part or in whole, is not permitted alarm purposes, horn (see pages 10, 11) 29 forAuxiliary unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�30 Interior monitoring sensor and vehicle inclination sensor 31 Multi-function steering wheel control unit 32 GATEWAY (see pages 10, 11) 33 Control unit of the seat adjustment memoryGB13Electrical unitsConnection of the CAN bus data logger in the vehicleT16 CAN diagnosticsCAN drive mechanism J... J583 J217 J587 J500 J104 G85 G419CAN dash panelLINJ285/J362J245/J394 J388 J389 G397 J400 H12 G273/G384 J453Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�J234 J492 J446/J791 J745 J668J667Legend: G85 G273 G384 G397 G419 H12 J… J104 J217 J234 J245 J255 Steering angle sender Interior monitoring sensor Vehicle inclination sender Light and rain detection sensor Sensor unit for ESP Alarm horn Engine control unit ABS/ESP control unit Automatic gearbox control unit Airbag control unit Control unit of the electrically controlled roof window Climatronic control unit J285 J301 J345 J362 J364 J386 J387 J388 J389 J394 J400 J412 Control unit in the dash panel insert Climatic control unit Trailer coupling control unit Immobiliser control unit Additional heating control unit Control unit of the driver door Control unit of the front passenger door Control unit of the left, rear door Control unit of the right, rear door Control unit of the electrically driven sun blind for the roof window Control unit of the windscreen wipers Control unit for mobile phone operation14GBJ533/J520CAN databus Convenience J543 J386 J387CAN infotainmentJ503 J650 J412Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted R12 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�J519J364J255/J301 J527 J345CAN data line of the drive mechanism (500 Kbit/s) CAN data line of the dash panel (500 Kbit/s) CAN data line Convenience (100 Kbit/s) CAN data line infotainment (100 Kbit/s) CAN data line diagnostics (500 Kbit/s) LIN data line (19.2 Kbit/s) K - line (10.4 Kbit/s)SP72_26J446 J453 J492 J500 J503 J503 J519 J520 J527 J533 J543 J583Parking aid control unit (PDC) Multi-function steering wheel control unit All-wheel drive control unit (Haldex) Power-assisted steering control unit Radio control unit Radio navigation system control unit Onboard supply control unit (BCM) Onboard supply control unit II (virtual unit) Steering column electronics control unit GATEWAY Control unit of the seat adjustment memory Control unit of the NOxJ587 J650 J667 J668 J745 J791 R12 T16Selector lever sensor control unit of the automatic gearbox Control unit for external multimedia devices Power device of the left bi-xenon headlight Power device of the right bi-xenon headlight Control unit of the bi-xenon headlights with cornering light Park assist control unit (PA) Amplifier (sound system) Diagnostic socketGB15Electrical unitsPA park assistA new generation of park assist systems is available for the Yeti model, which offers the driver an even higher convenience when parking. The park assist of the Yeti model operates according to the same principle as on the Superb II model, the components as well as their installation in the vehicle are similar. The park assist control unit in the Yeti model, in contrast to the Superb ll, has an additional function which makes it possible to park the vehicle in a proportionally shorter space between vehicles parked in longitudinal direction. If approx. 6 m of free parking space is required for the Superb ll model (vehicle length + about 1.4 m), approx. 5 m is needed for the semiautomatic parking of the Yeti (vehicle length + about 0.8 m).Installation of the PA components in the vehicleRear sensors of the PDC system Control unit of the PA systemRear loudspeakerLateral sensor of the PA systemSP72_09Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Front loudspeakerFront sensors of the PDC system Lateral sensor of the PA system16GBFunction of the PA park assist The software in the control unit was improved in order to meet the necessity of parking the vehicle in a shorter parking space, which means that on the Yeti model the control unit can intervene not only when steering backwards but from now on also forwards. This enables the parking maneuver to be carried out in several steps, therefore making it possible to save space. For purposes of multiple parking maneuvers as well as for eliminating the mistakes of the driver when parking the vehicle, new graphic symbols and error messages were introduced into the Maxi DOT display, which improve the clarity of instructions for the driver. New messages shown:• Park Assist: Stationary time not sufficient. - The vehicle must be stationary for at least one second before starting the parking maneuver and engaging the reverse gear. On the Superb ll model, failure to comply with this time limit may result in the vehicle being incorrectly parked, on the Yeti model, the following fault message is shown on the Maxi DOT display:SP72_10Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�• Park Assist: Speed too low. - To activate the system by means of the button, a speed of 10 km/h must be exceeded at least once after starting up the vehicle. Failure to comply with this speed limit results in the system not being activated, this is shown as a fault message on the Maxi DOT display for the Yeti model, however it is not shown for the Superb II.SP72_11You will find a detailed description of the PDA parking aid function and the PA park assist in the Service Training No. 66.GB17Electrical unitsDescription of the PA park assist The operation of the PA park assist can be divided into several steps. The individual steps according to which the driver orientates himself when parking, are shown on the Maxi DOT display. Activation of the PA park assist The PA sensors or the PA system is always activated after switching on the ignition, after exceeding the speed of 10 km/h for the first time and at a subsequent speed of 0 - 30 km/h. After acitvating these sensors, the area on both sides of the vehicle is scanned and a parking space with the adequate dimensions is searched for simultaniously on the driver's and front passenger side. If the PA button is not pressed, the system operates in the background, which means that the sensors are searching for spaces and these will be stored. In such a way, the PA button must not always be pressed before driving along parking spaces. The procedure of the parking maneuver appears on the Maxi DOT display after pressing the PA button and at a vehicle speed between 0 - 30 km/h. At the same time, the vehicle must keep a distance of 0.5 - 1.5 m from the row of parked vehicles. After activating the parking procedure shown on the Maxi DOT display and subsequently exceeding the speed of 30 km/h, the PA system remains in the standby mode up to the speed of 50 km/h. This means that when the speed drops below 30 km/h, the PA for status iscommercial automatically Protected by copyright. Copying private or purposes, in shown part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability again the Maxi display. SP72_19 with respect on to the correctness of DOT information in this document. Copyright by ŠKODA AUTO A. S.�If no directional light is switched on or the directional light on the front passenger side is switched on, the area of the selected parking space appears on the Maxi DOT display (figure SP72_12) after pressing the PA button. If the space on the driver's side should be displayed during the parking maneuver, the relevant directional light must be switched on.SP72_1218GBCourse of the parking maneuver When driving along the parked vehicles, the park assist searches for a suitable parking space with the aid of the lateral ultrasonic sensor. If the PA system finds a suitable space, this fact is shown on the Maxi DOT display in the form of graphic symbols (figure SP72_13) after pressing the PA button.SP72_13The space required for parking with the PA park assist must be at least 0.8 m longer than the actual length of the vehicle. After finding a suitable space to park, drive the vehicle further on until the graphic symbols (figure SP72_14) appear on the Maxi DOT display. At this moment, the vehicle must be stopped for at least 1 s. If this time limit is not respected, this can lead to incorrectly carrying out the parking maneuver. The information regarding the failure to comply with the time limit appears on the Maxi DOT display as a fault message (see figure SP72_10).Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP72_14GB19Electrical unitsAfter stopping the vehicle, the system requests from the driver to shift into the reverse gear and the message (see figure SP72_15) appears on the Maxi DOT display . At this moment, the PA system takes over the control of the steering. The driver only operates the brake and accelerator pedal (as well as the clutch on manual gearboxes) and with their help the driver drives backwards into the selected parking space at max. 7 km/h.SP72_15New function of the park assist A new function of the park assist is the intervention in the steering when driving forwards. If it is not possible to park with the intervention of the PA system, the parking maneuver continues. The driver is requested by the PA system, via graphic symbols on the Maxi DOT display (figure SP72_16), to shift into 1st gear and to operate only the brake and accelerator pedal (as well as the clutch on manual gearboxes), the following step is then carried out with a speed of max. 7 km/h.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP72_1620GBEven if afterwards the vehicle is not in the appropriate position, the system corrects the wheel position of the front axle and requests from the driver, via graphic symbols on the Maxi DOT display (figure SP72_17 ) to shift once more into the reverse gear and start off.SP72_17The last two steps can be repeated several times until the vehicle is in the position predefined by the PA system. Parameters of the predefined parking position: - the longitudinal axis of the vehicle must be parallel to the object limiting the parking space laterally (tolerance +/-2°) - the longitudinal axis of the vehicle must be parallel to the line of the driven path when scanning the parking space (tolerance +/-2°)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB21Electrical unitsCompleting the parking maneuverThe completion of the parking maneuver is indicated to the driver by means of the text message shown on the Maxi DOT display (figure SP72_18)SP72_18Deactivating the park assist The park assist is deactivated when: - exceeding the vehicle speed of 30 km/h while searching for a suitable parking space - exceeding the speed of km/hCopying during the parking maneuver Protected by7 copyright. for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability - exceeding the time limit of 180 s while shifting into the reverse gear after activating the park assist with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� using the PA button - exceeding the time limit of 180 s for parking - pressing the PA button - activating the PDC parking aid system - switching the ESP system on or off - intervention in the steering (holding the steering wheel)The evaluation of the parking space and the parking maneuver depend upon the wheel circumference of the vehicle. The system may operate incorrectly if the vehicle is equipped for example with wheels of non-authorised dimensions, chains or the emergency wheel. When changing the wheel and replacing it with one that has the dimensions approved by the manufacturer, the final position of the vehicle can slightly change in the parking space. The system of the park assist automatically carries out the correction of the wheel circumference parameters while driving.22GBMain headlightsThree versions of the main headlights are available for the Yeti model.- halogen headlights - halogen headlights with fog lights - bi-xenon headlights with dynamic cornering lightHalogen headlights A one-piece two-chamber halogen headlight with clear visual effect is the basic option for the main headlights. A halogen bulb H4 in the main chamber fulfils the function of the main beam and low beam light. The upper part of the round chamber serves as a daylight driving light.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability Low beam/main beam with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�with bulb H4Direction indicator Daylight driving lightSide lightSP72_21GB23Electrical unitsHalogen headlights with fog lights The second version of the halogen headlight is complemented with a fog light with a bulb H7 compared to the previous version, which forms the lower part of the round chamber.Low beam/main beam with bulb H4Direction indicator Daylight driving lightSide light Fog light with bulb H7SP72_22Bi-xenon headlights with dynamic cornering light and fog lights In the context of the exceptional option, the customer can equip his vehicle with bi-xenon headlights with dynamic cornering light. A xenon lamp, integrated in the main chamber of the headlight, is the source for the main beam and low beam light. Just as when choosing the halogen headlight, the round chamber serves for the daylight driving light and the fog light.Side light Xenon lamp for low beam/main beamDirection indicator Daylight driving lightProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Fog light with bulb H7SP72_2324GBAdaptive main beam lighting system AFSThe adaptive main beam lighting system in the Yeti model offers the function of the dynamic light and the predictive automatic control of the headlight inclination. The system is completed by the function of the turning light Corner. The AFS system is exclusively supplied in combination with bi-xenon headlights.Dynamic cornering light The dynamic cornering light illuminates the curves with small and large radii. It is based on the automatic turning of the dioptric-eliptic projector modules of the main headlights.SP72_20Activation conditions of the dynamic cornering light: - the position of the headlight rotary switch (LDS) is on "auto" or low beam/main beam - the reverse gear is not engaged - the function "Tourist light" is not switched on - the vehicle speed is more than 10 km/h or the function "Showroom" is activated The turning of the headlights, respectively the turning of the dioptric-elliptic modules towards the relevant side, is controlled depending on the steering wheel rotation and the vehicle speed. The function of the dynamic cornering light is controlled by means of the AFS control unit.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The activating or deactivating speed is the actual vehicle speed (from the ABS/ESP control unit) and not the one given on the speedometer, which is usually higher.GB25Electrical unitsPredictive automatic control of the headlight inclination The function of the automatic headlight inclination control ensures that the headlight inclination remains in its base (-1%) or in the standard range when the vehicle is loaded or when the chassis is inclined (acceleration/deacceleration). The predictive control estimates, on the basis of the signals from the ABS/ESP control unit and the vehicle speed, how the body will incline and in this way controls the inclination of the headlights earlier than the actual occurance of the physical inclination of the body.Function "Tourist light" If the vehicle is driven in a country with opposite direction of traffic (right-hand/left-hand traffic) as originally intended, the illumination would lead to the blinding of drivers from the opposite direction of traffic. To prevent this dazzlement, the vehicle is equipped with the function "Tourist light". The driver can activate this function himself by personalising it on the Maxi DOT display of the dash panel. If the vehicle does not have any Maxi DOT display, the driver must have the function activated with the diagnostic unit during the service. If the function "Tourist light" is activated, the dynamic cornering light is deactivated and the sporadic fault "function on left-hand/right-hand traffic active" is stored in the fault memory. After deactivating this function, the fault message is deleted.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Fog lights with the turning function - CornerThe light source for the Corner function are the front fog lights which are a component part of the main headlights. In addition, besides their standard function the fog lights also have the Corner function, which is implemented on the relevant side by the individual lighting of the right or left headlight depending on the steering wheel rotation and the directional lights which are switched on. If the headlight is used as a fog light, the Corner function is suppressed. When shifting into the reverse gear, both fog lights light up simultaniously. The Corner function is controlled by the onboard supply unit BCM.You will find a detailed description of the tourist light in the Service Training No. 66.26GBFog lights with the Corner function are offered in combination with the halogen headlights as well as the bi-xenon headlights.SP72_25The combination of the dynamic cornering light and the rotating headlights forms a unit, which ensures the optimal lighting of the roadway and the adjacent areas.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP72_24You will find additional information regarding the function of the dynamic cornering light and the Corner function in the Service Training No. 66.GB27Electrical unitsDash panelDepending on the equipment, two versions of the dash panel are installed in the Yeti model: - Low line - High line In terms of their function, they are based on the dash panels of the Superb ll model. Brief characteristics: - The dash panels are equipped with four analog devices (speedometer, rev counter, fuel gauge, coolant temperature) - integrated immobiliser of the 4th generation with online adaptation via FAZIT server - communication protocol BAP and diagnostic protocol UDS - integrated characteristics of two floats for evaluating the fuel quantity Modifications in reference to the dash panel in the Superb II model: - in addition, warning lamp of Offroad driving mode - the warning lamps were moved from the initial position into the analog devices via the centre display (speedometer, rev counter) - the warning lamp of the opened engine hood is no longer fittedVersions Low lineSP72_32Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�28GBAnalog devices: - rev counter - speedometer - fuel gauge - coolant temperature The centre segment of the display (white, 240 segments) shows: - the time - the engaged gear of the automatic gearbox - information from the onboard computer MFD (range, average fuel consumption, temporary fuel consumption, travel time, outside temperature, exceeding the set speed limit, current speed, distance driven) - total and daily kilometer reading - second speed in mph - service interval Warning lamps: - engine electronics EPC warning lamp (petrol engine); or preheating (diesel engine) - filter for solids DPF (diesel engine) - oil pressure/level - malfunction of the bulb - rear fog light - main beam - fog lights - effect of the engine electronics warning lamp on the exhaust emission - charge - inadequate liquid in the windscreen washer system, low beam - electromechanical power-assisted steering - temperature/quantity of coolant - left/right directional light - airbag system - seat belts buckled up - antilock braking system ABS - electronic stabilisation system ESP/traction control system TCS - brake system/handbrake - cruise control system - tyre pressure inspection - offroad driving mode - door open - luggage compartment door open - inspection of brake pad thickness - locking the selector lever for the automatic gearbox - fuel reserveGBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�29Electrical unitsHigh lineSP72_33Differences to the Low line version: The centre segment of the display was replaced with the DOT display (white, 166 x 110 points) and in addition to the Low line version, it shows: - the compass (vehicle equipped with navigation system) - constantly the outside temperature (information from the MFD) - information from the navigation system and radio, PA park assist, mobile phone operation etc. The warning lamps are the same as on the Low line version, however some of them were replaced on Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted the DOT display by a pictogram or a unless text authorised message: by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� - oil pressure/level - inspection of brake pad thickness - door open (replaced by pictogram CarOutline) - luggage compartment door open (replaced by pictogram CarOutline)You will find a detailed description of the DOT display in the Service Training No. 66.30GBMDI interfaceThe Yeti model is equipped with a so-called MDI interface (Mobile Device Interface), which makes it possible to connect an external multimedia device. An external device which is connected in such a way can be conveniently operated via the radio, the navigation system or on the multi-function steering wheel. The MDI unit assists devices such as iPOD, MP3 player, flash disc (FAT16 2GB, FAT322GB), HDD disc and other devices with USB 2.0 plug. Furthermore, all the devices with headphone Jack output 3.5 mm. Data from external devices connected by means of the multimedia plug can be played in the format MP3, WMA, OGG Vorbis and AAC via the radio or navigation system.The connection of the device is carried out by means of the multifunction plug which is located in front of the shift lever. The connection of the MDI plug and the external device is carried out via the connection cable from the range of the Škoda original accessories. The connection cable is available in four versions - USB, mini USB, Jack 3.5 or iPOD socket. When connected via the Jack 3.5 socket, the convenience mode does not function and the playback is performed according to the AUX-IN principle.SP72_45Conditions for the connection of external devices: - When playing back sound recordings of large data volume from a device with a hard disc (HDD) or from a device with a complex directory structure, this may cause a delay in reading the overview of the data. - The directory structure of the connected device should not exceed the depth of eight subdirectories. - A directory should not have more than 1000 files. - Do not use a USB extension cable or a HUB distribution board for connecting the device.The external device is loaded via the MDI interface, except the devices which are connected via the Jack 3.5 socket.GBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�31Electrical unitsRadios and navigation systemsRadio Blues Radio Blues is part of the basic equipment for the Yeti model. Radio Swing Radio Swing, which is offered amongst other radios for the Yeti model, is the representative of the middle class.SP72_27SP72_28Technical specification: • 1 DIN size • playback of CD audio and CD MP3 • RDS function • GALA function • possibility of operating via the multi-function steering wheel • possibility of connecting an external CD changer • possibility of connecting a hands-free system • possibility of connecting an external device via AUX IN (Jack 3.5 mm), if the vehicle is equipped with Jumbo-Box. • security coding • cooperation with parking sensors (radio low)Technical specification: (advanced functions in reference to Radio Blues) • 2 DIN size • power output 4x20 W • negative display with white fluoroscopy • 2 tuners for improved quality in the FM range • playback of CD audio, CD MP3 and CD WMA • connection of an external device via MDI interface • shows time and outside temperature • information displayed from the PDC system • illustration of the setting for the air conditioning system Climatronic • protected by number code, which can only be called up online via the Škoda systemProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�32GBRadio Bolero The radio Bolero comprises the most complete system in the range of radios.Navigation system Amundsen The navigation system Amundsen is the representative of the basic class of navigation systems provided for the Yeti model.SP72_29SP72_30Technical specification: (advanced functions in reference to Radio Swing)Technical specification: (advanced functions in reference to Radio Bolero)• 6.5" color TFT contact display with resolution • 5" color TFT contact display with resolution 400x240 400x240 • slot for SD and MMC memory cards with a ca• dynamic navigation with CD or SD card pacity up to 4 GB and SDHC cards up to 32 GB • possibility to copy several CDs onto the SD card • integrated changer for 6 CDs, for playing back Protected by copyright. Copying forprojection private or commercial purposes, in part or in the whole, is not permitted • map only possible in 2.5D mode unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability CD, CD MP3 and CD WMA (also possible in the 2D mode during the series with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� • TIM - memory for traffic messages production of the vehicle) • setting the language • illustration of selected POI points on the map • illustration of the setting for the air conditioning (petrol stations, parking spaces, Škoda Service) system Climatronic in pop-up windows and illustration of the icons for the TMC events • possibility of setting the equalizer (only with on the map sound system) • guidance with a subgoal • setting of the spatial sound effect (only for • possibility of showing the compass sound system) • shows the time • possibility of convenience mode of the • light sensor for automatic brightness adaptation telephone via the contact display of the radio • automatic setting of the card in day/night mode (only for telephones connected via GSM II set depending if the light is switched on for the from the production) journey • possibility of connecting with the sound system • integrated AUX-IN socket (Jack 3.5 mm) equipment • possibility of user setting for 4 drivers (the pro• does not show time and outside temperature file switching occurs automatically according to • external CD changer cannot be connected the currently inserted ignition key) • changer for 6 CDs not integrated • no TIM - memory for traffic messages • the convenience mode of the telephone via the contact display of the navigation system is available during the series production of the vehicleGB33Electrical unitsNavigation system Columbus The navigation system Columbus includes complete and convenient operation of the navigation, communication and multimedia functions. • possibility of setting the picture size to 4:3 or 16:9 and the title • voice control (during the series production of the vehicle) • output AUX-IN (Jack 3.5 mm) is not integrated in the device, it is a component part of the JumboBox • no possibility of storing user settings for 4 drivers • possibility of convenience mode of the telephone via the contact display of the navigation system (only for telephones connected via GSM II set from the production)SP72_31Technical specification: (advanced functions in reference to the navigation system Amundsen) • 6.5" TFT contact display with resolution 800x480 • DVD mechanics • hard disk 30 GB (10 GB for navigation data, 20 GB for audio recordings) • map projection in 3 basic modes (2D, 2.5D, topographic) • mode terrain navigation (navigation outside the digitalised road networks according to the previously inserted points) • dynamic navigation from DVD or hard disc • guidance with several subgoals (up to 10 routes can be stored) • possibility to manually close a stretch of road (e.g. long-term closing off of a road, which is not transmitted in the context of TMC while the navigation should always be carried out via this stretch) Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted • illustration of the unless speed limitby on theAUTO currently authorised ŠKODA A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� driven road (symbol for traffic sign) • additional information for position calculation during failure of the GPS signal is provided using a gyroscope • slot for SD and MMC cards with a capacity up to 2 GB; (also possible for SDHC cards up to 32 GB during the series production of the vehicle) • possibility of playing back a DVD video34GBTelephone preinstallation GSM IIThe telephone preinstallation GSM II, with which the Yeti model is equipped, uses primarily the Bluetooth interfaceTM. The telephone preinstallation GSM II is supplied in two versions for the Yeti model: - without mobile phone holder - with mobile phone holderTelephone preinstallation without mobile phone holder The telephone preinstallation without holder only permits the communication between the mobile phone and the UHV device via the data interface for BluetoothTM. Therefore, neither the mobile phone holder nor the external antenna on the roof of the vehicle is a component part of this preinstallation. The communication via the interface for BluetoothTM is processed via the hands-free system profile (HFP - version 1.5 and 1.0). The UHV unit additionally assists the profile for the downloading of the phonebook PBAP (PhoneBook Access Profile), an alternative to downloading the phonebook via HFP. The contact names in the telephone will be transferred via the set of characters UTF-8, therefore, signs of the Russian or Chinese alphabet or Czech diacritics are displayed on the dash panel.The telephone preinstallation without mobile phone holder can be installed in vehicles with left and right-hand drive.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Telephone preinstallation with mobile phone holder The mobile phone can be connected with the telephone preinstallation with holder to the UHV unit via the Bluetooth interfaceTM and at the same time the telephone can be placed in the holder. The holder is fixed to the instrument panel using a console so that the driver can follow the display of the telephone as well as operate it. There are currently two types of holders for the mobile phone. The new holders are marked with the symbol for the Bluetooth interfaceTM and the superscript "Bluetooth only". Holders with this identification are only used for charging the telephone, the actual communication between the telephone and the UHV unit is processed via the Bluetooth interfaceTM just as for the telephone preinstallation without holder. This type of holder is fitted with a PTT button (Push to Talk) in order to activate the voice control or with an SOS button as a second button, which does not function however in combination with this UHV unit.GB35Electrical unitsThe older type of holder has only one button - PTT and does not have the superscript "Bluetooth only". This means that the adapter assists the charging of the telephone, however it does not assist the communication via the Bluetooth interfaceTM. If the telephone is placed in this holder, a possible communication via the Bluetooth interface between the telephone and the UHV unit can be interrupted and is only processed via the cable of the holder. The consequence of communication via the cable is the loss of support of the character set UTF-8. This means that diacritical characters in the contact information are replaced by empty fields.Both types of adapters described have an antenna input for the telephone. If the telephone is in the holder, then the external antenna on the roof is used when phoning. Thus, the harmful radiation of the mobile phone is reduced and the quality of the call is improved.The telephone preinstallation with mobile phone holder can be installed in vehicles with left-hand drive.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�UHV control unit The UHV control unit memorises the last three connected mobile phones and the respective SIM cards (continued as "SIM card phone combination") If two different SIM cards are inserted in a phone, this is a dual SIM card phone just as if one SIM card is inserted in two different telephone devices. If a quad SIM card phone is connected, this replaces the combination which was not used in the UHV unit for a longer period of time. This means that the UHV unit easily assists a trio SIM card phone, however when using four or more combinations, the first connection (set-up) must be repeated. The type of connection also plays a role. If a combination SIM card for telephone is connected once via the Bluetooth interfaceTM and another time via the adapter cable, the UHV unit recognises it as two different telephones. When connecting the mobile phone to the UHV unit for the first time, the phonebook is loaded, the course can be followed on the dash panel. When reconnecting, the loading is already processed "in the backdrop" and the UHV unit can be used as normal, there is no need to wait until the whole directory has been loaded. If differences in the backdrop are noticed between the directories in the telephone and the UHV unit, after completing the loading, the information contained in the UHV unit is updated.36GBOperating the dash panel The dash panel has the following functions: - tracking the first download of the directories - illustration of the phonebook and choice of contact - illustration of the call directory with the possibility of the choice of contact - accepting an incoming call - terminating a current call - accepting or rejecting a call on the lineThe functions of the UHV unit are only assisted by the dash panel High line with Maxi DOT display.Operation using the multi-function steering wheel In the telephone version, the multi-function steering wheel (MFSW) is fitted with two buttons for operating the UHV unit. The first button i.e the PTT button, is used to activate the voice control, similar as for the holder. The second button is marked with the symbol . Function of the button :PTT button Button- entry in the telephone menu from another context of the dash panel - entry in the called numbers of the telephone Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted menuby ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability unless authorised with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� - dialing what was selected in the telephone directory or in the call directory - accepting an incoming call (briefly pressing) - rejecting an incoming call (pressing for a long period of time) - accepting a call on the line (briefly pressing) - rejecting a call on the line (pressing for a long period of time)SP72_41The multi-function steering wheel does not function when the ignition is switched off, even if the relevant menu is shown on the dash panel.GB37Electrical unitsOperating the radio or the navigation system The radio or navigation system assists the following functions: - illustration of the phonebook and choice of contact* - illustration of the call directory and choice of contact - illustration of the operator, the signal strength and the telephone name or type of telephone - quick search in the telephone directory after entering the first letter of the contact - setting of the six most frequently used contacts on the main screen for quick dialing - accepting an incoming call - terminating a current call - accepting or rejecting a call on the line - dialing a telephone number on the keypad of the contact display for the radio or the navigation (the input of the DTMF tones during an ongoing call is not assisted) - restoring the setting of the UHV unit from the production - switching off the microphone in the vehicle interior* The illustration of the phonebook is functionally different between the radio and navigation system. Whereas on the radio, when the phonebook and its individual positions are shown, a real-time communication proceeds with the UHV unit, during which the navigation system stores a copy of the phonebook in the memory and does not communicate with the UHV unit when scrowling through the directory. From this it follows that possible changes made in the phonebook (during the connection of the telephone with the UHV unit) appear in the navigation system with a delay as compared to the radio. The user is informed about the fact that the phonebook has been updated with the message "New phonebook available". Protected byDOT copyright. Copying for private or commercial purposes, in part or inas whole, is not permitted The illustration of the phonebook on the Maxi display proceeds in the same way on the unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability radio. with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The functions of the UHV control unit are only available on a radio or navigation system with the assistance of the communication via BAP protocol using the unit.Voice control of the mobile phone The voice control of the telephone is activated by the PTT button on the multi-function steering wheel or on the telephone holder. After the signal sounds, spoken commands can be given. The time during which the system is ready to accept and carry out spoken commands, is called dialogue. The system responds with audible feedback and reports any possible further steps. The dialogue may be started or terminated at any time by pressing the PTT button on the multi-function steering wheel or the holder. The dialogue is automatically terminated after carrying out an operation, for example when deleting a name in the phonebook. When a call is received, the dialogue is immediately terminated so that the call can be accepted. If the system does not detect the voice command, the system answers with the question "Pardon?" and thus making it possible to set a new task. After the 2nd incorrect attempt, the system repeats the help. After the 3rd incorrect attempt, the answer "Terminate" follows and the dialogue is closed.38GBSystem overviewJ285 J533 J519J453J503R...J412R38J527Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�***AdapterR54R54ABR65SP72_42Legend: J285 J412 J453 J503 J519 J527 J533 R38 R54 R65 R... Control unit in the dash panel insert Control unit for mobile phone operation (UHV) Multi-function steering wheel control unit Radio/radio navigation system control unit Onboard supply control unit (BCM) Steering column electronics control unit GATEWAY Telephone microphone Mobile phone external telephone antenna loudspeaker (the number depends on the version of the vehicle equipment) A B Telephone preinstallation without holder Telephone preinstallation with holder * Communication with adapter "Bluetooth only" ** Communication with adapter without BluetoothCAN data line of the dash panel (500 Kbit/s) CAN data line Convenience (100 Kbit/s) CAN data line infotainment (100 Kbit/s) LIN data line (19.2 Kbit/s) Communication lineBluetoothTM - data transmissionGB39Electrical unitsAntenna conceptIn the Yeti model, antennas are installed for receiving and transmitting different radio frequencies (radio, GSM, GPS). One part of the functions is incorporated in the roof antenna, another part is integrated in the rear window antenna. The radio signals are received via individual antenna modules. These signals are transmitted from the antenna to the final device via a coaxial cable. The antenna has an active signal amplifier which is fed with 12 V from the side of the receiver via a coaxial cable. The GPS antenna is an exception, it is only fed with 5 V. The GSM antenna is a passive and two-way antenna (it also serves as a transmitting antenna).Radio Blues The antennas for the AM/FM1 radio and mobile phone reception (GSM) are integrated in the roof antenna for the car radio Blues.GSM AM/FM1RadioProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP72_4640GBRadio Swing/Bolero The car radios Swing and Bolero are equipped with two tuners for a better reception quality in the FM range. These are so-called diversion radio receivers, which have two antennas. The antenna for the first tuner FM1 is incorporated as standard in the roof antenna and the antenna for the second tuner FM2 is integrated in the rear window as a component part of the heating system, whereby the total heated surface serves as an antenna. For connecting the tuner FM2 to the antenna in the rear window, an impedance transformer FM is required. The correct function of the antenna, integrated in the window, is determined by limiting the loss of the received signal in the on-board power supply. For this purpose, the so-called blocking circuits are used, which are connected to the heating and the connection in the window. A cable for the reception of the mobile phone band (GSM) is also a component part of the roof antenna.+Blocking circuit FMVoltage feed of the tailgate window heatingBlocking circuit FMGSM Impedance transformer FM FM2 AM/FM1RadioSP72_47GBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�41Electrical unitsNavigation system Amundsen/Columbus The antenna concept of the navigation systems Amundsen and Columbus is the same as for the radios Swing and Bolero. In contrast to the radios, they have in addition an element for receiving the signals of the navigation system (GPS) integrated in the roof antenna.+Blocking circuit FMVoltage feed of the tailgate window heatingBlocking circuit FMGSMImpedance transformer FM FM2AM/FM1GPSRadioSP72_50Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�42GBSteering wheelsThe steering wheels provided for the Yeti model, have already been used for the Superb II. The customer can select from a range of five steering wheels with a diameter of 375 mm. The 4-arm basic version of the steering wheel is made of polyurethane (PUR) and has a pattern. The higher class is represented by a 4-arm steering wheel stitched all around with genuine leather, equipped with a chrome bar. The best steering wheel is the multi-function steering wheel with buttons to operate the Maxi DOT display, the radio or the Škoda navigation system and the telephone preinstallation GSM II. Besides the range of the 4-arm steering wheels, 3-arm versions are also available for the customer in the basic version, which are already stitched all around with genuine leather. Within the range of the exceptional equipment, these versions are also equipped with the multi-function operation just as the 4-arm versions.4-arm steering wheel PUR4-arm leather steering wheel4-arm multi-function steering wheelSP72_36SP72_37SP72_383-arm leather steering wheel3-arm multi-function steering wheelSP72_39SP72_40GBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�43Electrical unitsControl of the outside illumination of the vehicleThe function of the control for the outside illumination of the vehicle is available as standard for the complete equipment range of the Yeti model. The system monitors the voltage on all the lamps for the outside illumination of the vehicle. A defect of one of the lamps is notified by the warning lighting up on the dash panel. For velamp hicles equipped with the Maxi DOT display, the lighting up of the warning lamp is accompanied by a text message, for example "Check front right dipped beam!". The warning lamp or the fault message is shown for two seconds after switching on the ignition and at the same time when switching on the defective bulb. The rear parking light and the licence plate light on the have several bulbs. The warning lamp dash panel only lights up if all the lamps which illuminate the license plate or the parking light (in a group lamp) are defective. The system does not monitor the bulbs in the vehicle interior. Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permittedunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP72_3444GBTrailer couplingThe attachment for the trailer coupling of the Yeti model can be fitted directly during the production or subsequently ordered from the range of the Škoda original accessories. Some vehicle components are adapted to the trailer coupling which is directly installed during the production. This includes the fans of the cooling system, the alternator and the battery. These components have a higher power output and ensure the correct function of all the vehicle systems when towing a trailer of the permissible maximum weight. The trailer coupling, which is installed during the production, always has a removable head.SP72_35Advantages of the trailer coupling which is installed during the production: • the control unit of the trailer coupling enables the connection of a device with LED lights (trailer, bicycle carrier etc.) • if a trailer or another device is connected to the vehicle (respectively the plug is inserted in the socket of the trailer coupling), only the fog lights on the connected device come on, however not the fog lights on the vehicle when the rear fog lights are switched on, conservation of energy and prolongation of the life of the bulbs • for vehicles equipped with rear parking aid (PDC) during the production, the critical distance to the obsta