TECHNICAL DOCUMENTATION

SSP 064 Škoda Fabia II Presentation of the vehicle

PDFEN60 pages5 MB
SSP 064 Škoda Fabia II Presentation of the vehicle - PDF cover

This PDF is currently unavailable.

Read document text
SSP 64GBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� The ŠkodaFabia II will replace the previous model Fabia of the first generation very successful on the European market, which up to now has found more than 1.5 million buyers. Also the ŠkodaFabia II is a representative of the A-class vehicles and like its predecessor it is manufactured in the factory Mladá Boleslav. From the same vehicle class is the ŠkodaRoomster manufactured in the Škoda factory Kvasiny, however it is oriented to another target group.SP64_82The ŠkodaFabia II begins with 7 engine variants – 4 petrol engines and 3 diesel engines. The customer can also select a 6-speed Tiptronic automatic gearbox. Due to its dimension (3992 mm x 1642 mm x 1498 mm) the ŠkodaFabia II belongs to the largest representatives of this class of vehicle. During the development and the design, state-of-the-art technologies were used - for example the virtual reality as an assistance to the CAD design already in use.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB ContentsŠkodaFabia II Vehicle dimensions Body Engine/gearbox combinations Engines Fuel system Transmission Running gear Occupant protection Heating and Air conditioning system Electrical system Interior of the vehicle Notes 4 6 8 10 12 19 24 26 36 40 42 58 60Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�You will find instructions for the assembly, disassembly, repairs, diagnostics and detailed user information in the service manuals, in the diagnosis unit VAS 5051/5052 and in the on-board manual. Time of going to press 01/2007. This brochure is not subject to the update.GB ŠkodaFabia IIBrief presentation of the vehicle ŠkodaFabia II• Three-point seat belt for the middle rear seat• Halogenswivel headlightProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�• Fully automatic air conditioning system Climatronic• Fog lights with turning light function „Corner light“GB • Control of the broadcast receiver and the telephone with the new steering wheel multi-function module• Head airbags for more safety of the passengers• Tire pressure inspectionProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP64_73• Satellite navigation system Lowline• 6-Speed automatic gearboxGB Vehicle dimensionsOuter dimensions8512462 3992679SP64_84Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted 1426 1436 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability 1642 1886 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP64_851498 - 1513SP64_86 GB Interior dimensions300 l994 mm989 mm621 - 864 mm858 - 1075 mmSP64_83Weight, volumeAir resistance correction value cx Luggage compartment volume Luggage compartment volume with removed rear seats Fuel reservoir volume Unladen weight1) Permissible loading capacity1) Permissible trailer load braked1) unbraked1) Maximum roof load Permissible load on the trailer coupling1) The aforementioned values depend on the drive unit and the equipment of the vehicle.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�0,33 300 l 1,163 l 45 l 1015 - 1170 kg 515 - 490 kg800 - 1200 kg 500 kg 75 kg 50 kgGB BodyStructure of the bodyThe body design was assisted by the most modern mathematic computations. The most modern technologies and materials were used. This results in a very rigid body with a relatively small weight. As for the ŠkodaRoomster high-tensile steel is used to a considerable extent for the body of the ŠkodaFabia II.SP64_80Share of the carcass of used steel10% 40 %Firmness of the used sheet metals Rp0.2 180 MPa8%p0,2or in whole, is not permitted Protected by copyright. Copying for private or commercial purposes, in part 42%by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability unless authorised Rp0,2 by 300 - 500 MPa with respect to the correctness of information in this document. Copyright ŠKODA AUTO A. S.�R180 - 300 MPaRp0,2 500 MPaSP64_81Rp0,2 - Fließgrenze im ZugGB The front crash zoneIn order to avoid and/or minimize damage at important assemblies within the front area in case of a low speed crash, the front area and its attached parts were conceptualized together and the parts were co-ordinated. Thus the damages of the most important parts, (such as e.g. water cooler, AC condenser, air guides etc.) could be clearly reduced in case of a vehicle impact. One of the design solutions, which reduces the damage in case of a minor crash, is the cross strut of the bumper, in particular its lateral tie up area through which the strut is fastened to the frame side rail. Specific bending points are integrated into these areas, which in case of a vehicle impact lead to a targeted deformation, which absorbs the energy and reduces the consequences of the vehicle impact to the cost-intensive parts.Front end module carrierCross strut of bumperProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Foam material fillingFront frame side railAdditional strut of bumperSP64_34Front bumpertargeted deformed area of the bumper cross memberGB Engine/gearbox combinationsEngineTransmissionPetrol engine 1.2 ltr./44 kW - MPI 108 NmPetrol engine 1.2 ltr./51 kW - MPI 112 NmPetrol engine 1.4 ltr./63 kW - MPI 132 Nm5-Speed manual gearbox 02TProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�5-Speed manual gearbox 02R6-Speed automatic gearbox 09GNote: The aforementioned overview of the possible combinations of engines and gearboxes applies to the beginning of the series production.10GB Petrol engine 1.6 ltr./77 kW - MPI 153 NmDiesel engine 1.4 ltr./51 kW - TDI 155 NmDiesel engine 1.4 ltr./59 kW - TDI 195 NmDiesel engine 1.9 ltr./77 kW - TDI 240 NmProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB11 Engines1.2 ltr./44 kW Petrol engine- MPI 2-valve technologyTechnical highlights of the engine The basic engine type of the ŠkodaFabia II is the 1.2 ltr. MPI unit with 2-valve technology, which has already been tried and tested for the previous Fabia generation. For the Fabia II certain smaller modifications were carried out, for example the software modification of the control unit which increased the power output up to 44 KW.with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Note: You will find the detailed description of the engine 1.2 ltr./44 KW - MPI in the Self-Study Program No. Technical Data 45.- Engine block and cylinder head out of alumi num alloy - 4x layered crankshaft with 6 balancing weights - Drive of the camshafts and the oil pump of the crankshaft by means of timing chain - the lambda probes in front and behind the catalytic converter have jump characteristic - Exhaust gas recirculation is regulated by a pneumatic control valve - Plastic intake manifold SP64_19 - Catalytic converter close to the engine - crossflow coolant in the cylinder head Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted - S. optimized camshaft unless authorised by ŠKODA AUTO A. ŠKODA AUTO A. S. does not guarantee or accept any liabilityPower output and torque diagram70 65 60 55 50 45 40 35 P (kW) 30 25 20 15 10 150 140 130 120 110 100 90 80 M (Nm) 70100020003000 n (min-1)400050006000SP64_35Engine code letters: BBM Type: Inline engine Number of cylinders: 3 Valves per cylinder: 2 Displacement: 1198 cm3 Bore diameter: 76.5 mm Stroke: 86.9 mm Compression ratio: 10.3 Max. power output: 44 kW at 5200 rpm-1 Max. torque: 108 Nm at 3000 rpm-1 Engine management: Simos 9.0 Fuel: unleaded Petrol RON 95 (or RON 91 with reduced power output) Exhaust gas aftertreatment: 1 three way catalytic converter; lambda probe with jump characteristic in front and behind the cata lytic converter Emission standard: EU4, EU2DDK12GB 1.2 ltr./51 kW Petrol engine- MPI 4-valve technologyTechnical highlights of the engine This engine is already used in the ŠkodaRoomster. For the ŠkodaFabia II however some smaller changes were performed, such as e.g. to the suction module and the control software, which increased the power output. - - - - - - - - - Engine block and cylinder head out of aluminum alloy 4x layered crankshaft with 6 balancing weights Drive of the camshafts and the oil pump of the crankshaft by means of timing chain the lambda probes in front and behind the catalytic converter have jump characteristic Exhaust gas recirculation is regulated by a pneumatic control valve Plastic intake manifold Catalytic converter close to the engine crossflow coolant in the cylinder head optimized camshaftSP64_10Note: You will find the detailed description of the engine 1.2 ltr./51 KW - MPI in the Self-Study Program No. 45. Power output and torque diagram70 65 60 55 50 45 40 35 P (kW) 30 25 20 15 10Technical Data10002000-13000 n (min )4000Engine code letters: BZG Type: Inline engine Number of cylinders: 3 150 Valves per cylinder: 4 140 Displacement: 1198 cm3 130 Bore diameter: 76.5 mm 120 Stroke: 86.9 mm 110 Compression ratio: 10.5 100 Max. power output: 51 kW at 5400 rpm-1 90 Max. torque: 112 Nm at 3000 rpm-1 80 Engine management: Simos 9.0 70 Fuel: unleaded Petrol RON 95 (or RON 91 with reduced power output) Exhaust gas afterProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability treatment: 1 three way catalytic with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� converter; lambda probes with jump characteristic in 5000 6000 front and behind the cata lytic converter SP64_36 Emission standard: EU4, EU2DDKM (Nm)GB13 Engines1.4 ltr./63 kW Petrol engine - MPI 4-valve technologyTechnical highlights of the engine This engine is the follow-up of the wellknown Fabia 1.4 ltr./55 KW 16 V unit. For the ŠkodaRoomster and Fabia II the engine was redesigned and its parameters were increased. - - - - - - - - - - - - - Cylinder block and cylinder head out of aluminum alloy Drive of the camshafts with toothed belt optimized ventilation of the crankshaft housing via the PCV valve Plastic intake manifold Suction filter directly to engine Catalytic converter close to the engine without exhaust gas recirculation contactless ignition system with 4 ignition coils new engine management unit (80-pin) Sheet metal oil pan heated ventilation of the crankshaft housing EPC Throttle valve with contactless senderSP64_05Technical DataProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�70 65 60 55 50 45 40 35 P (kW) 30 25 20 15 10 150 140 130 120 110 100 90 80 M (Nm) 70Power output and torque diagram100020003000 n (min-1)400050006000SP64_29Engine code letters: BXW Type: Inline engine Number of cylinders: 4 Valves per cylinder: 4 Displacement: 1,390 cm3 Bore diameter: 76.5 mm Stroke: 75.6 mm Compression ratio: 10.5 Max. power output: 63 kW at 5000 rpm-1 Max. torque: 132 Nm at 3800 rpm-1 Engine management: Magneti Marelli System 4HV Fuel: unleaded Petrol RON 95 (or RON 91 with reduced power output) Exhaust gas aftertreatment: 2 three way catalytic converters; lambda probes with jump characteristic in front and behind the cata lytic converter Emission standard: EU4, EU2DDK14GB 1.6 ltr./77 kW Petrol engine - MPI 4-valve technologyTechnical highlights of the engine The 1.6 ltr./77 KW - MPI engine was used for the first time for ŠkodaRoomster and is also used wird in the same version in the ŠkodaFabia II. - - - - - - - - - - - - Cylinder block and cylinder head out of aluminum alloy Plastic intake manifold Air filter directly to engine Camshaft drive with timing chain contactless ignition system with 4 ignition coils continuous camshaft adjustment of the suction valves Catalytic converter close to the engine No exhaust gas recirculation optimized ventilation of the crankshaft housing by means of the PCV valve heated ventilation of the crankshaft housing Oil pan out of aluminum alloy Oil pump with pressure controlSP64_06Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Technical Data Power output and torque diagram80 75 70 65 60 55 50 45 P (kW) 40 35 30 25 20 160 150 140 130 120 110 100 M (Nm) 2000 3000 4000 n (min-1) 5000 60001000SP64_30Engine code letters: BTS Type: Inline engine Number of cylinders: 4 Valves per cylinder: 4 Displacement: 1,598 cm3 Bore diameter: 76.5 mm Stroke: 86.9 mm Compression ratio: 10.5 Max. power output: 77 kW at 5600 rpm-1 Max. torque: 153 Nm at 3800 rpm-1 Engine management: BOSCH ME7.5.20 Fuel: unleaded Petrol RON 95 or RON91 with reduced power output Exhaust gas aftertreatment: 2 three way catalytic converters; lambda probes with jump characteristic in front and behind the cata lytic converter Emission standard: EU4, EU2DDKGB15 Engines1.4 ltr./51 kW diesel engine - TDI 2-valve technologyTechnical highlights of the engine This unit is the basis diesel motorizing of the Fabia II. The engine is derived from the the 1.4 ltr./55 KW TDI, which was used for the 1st generation of Fabia. - - - - - - - - - - Cylinder block out of grey cast iron Cylinder head out of aluminum alloy Valve control with toothed belt Drive of the crankshaft balancing shaft using a chain Cooling pump integrated into the engine block Turbocharger with regulated Bypass Vacuum pump at cylinder head driven by the camshaft Engine with pendulum suspension Unit injection Exhaust gas recirculation with coolingSP64_07Note: You will find the detailed description of the engine 1.4 ltr./55 KW - TDI PD in the Self-Study Program No. 52. Power output and torque diagram Data Protected by copyright. Copying forTechnical private or commercial purposes, in part or in whole, is not permitted70 65 60 55 50 45 40 35 P (kW) 30 25 20 300 250 200 150 100 50 0 M (Nm)unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� 35010002000-13000 n (min )40005000Engine code letters: BNM Type: Inline engine Number of cylinders: 3 Valves per cylinder: 2 Displacement: 1,422 cm3 Bore diameter: 79.5 mm Stroke: 95.5 mm Compression ratio: 19.5 Max. power output: 51 kW at 4000 rpm-1 Max. torque: 155 Nm at 1600-2800 rpm-1 Engine management: BOSCH EDC15P+ Fuel: Diesel at least 51 CN Exhaust gas recirculation treatment: Oxidation catalytic converter Emission standard: EU4SP64_3116GB 1.4 ltr./59 kW diesel engine - TDI 2-valve technologyTechnical highlights of the engine The 1.4 ltr.l/59 KW TDI is an uprated variant of the basis diesel engine and is derived exactly from the 1.4 ltr./55 KW TDI of the 1st generation of Fabia. - - - - - - - - - - - Cylinder block out of grey cast iron Cylinder head out of aluminum alloy Valve control with toothed belt Drive of the crankshaft balancing shaft using a chain Cooling pump integrated into the engine block Turbocharger with regulated Bypass Vacuum pump at cylinder head driven by the camshaft Engine with pendulum suspension Unit injection Exhaust gas recirculation with cooling Ceramic glow plugs (BMS)SP64_08Note: You will find the detailed description of the engine 1.4 ltr./55 KW - TDI PD in the Self-Study Program No. 52. Power output and torque diagram70 65 60 55 50 45 40 35 P (kW) 30 25 20 350 300Technical Data10002000Engine code letters: BNV, BMS Type: Inline engine 250 Number of cylinders: 3 200 Valves per cylinder: 2 150 Displacement: 1,422 cm3 100 Bore diameter: 79.5 mm 50 Stroke: 95.5 mm 0 Compression ratio: 19.5 Max. power output: 59 kW at 4000 rpm-1 Max. torque: 195 Nm at 2200 rpm-1 Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability Engine EDC15P+ with respect to the correctness of information in this document. Copyright management: BOSCH by ŠKODA AUTO A. S.� Fuel: Diesel at least 51 CN Exhaust gasrecirculation: Oxidation catalytic converter 3000 5000 4000 Emission standard: EU4, EU4+DPFn (min-1)SP64_32*) The engine with the engine code letters BMS is shown on the figure GBM (Nm)17 Engines1.9 ltr./77 kW diesel engine - TDI 2-valve technologyTechnical highlights of the engine The 1.9 ltr./77 KW engine is the highest performance diesel engine of ŠkodaFabia II. It is the well-known 1.9 ltr./74 KW unit from the other Škoda models, with a power output increase due to a software modification. - - - - - - - - - SP64_08Cylinder block out of grey cast iron Cylinder head out of aluminum alloy Unit injection Valve lever with hydraulic compensation of valve play Tandem pump (fuel feed and low pressure generation) and electrical fuel pump Turbocharger with adjustable blade geometry Radiator of fuel recirculation Exhaust gas recirculation with cooling Ceramic glow plugsPower output and torque diagram90 85 80 75 70 65 60 55 P (kW) 50 45 40 35 400 350 300 250 200 150 100 50 M (Nm) 0Technical Data Engine code letters: BNV, BMS Type: Inline engine Number of cylinders: 4 Valves per cylinder: 2 Displacement: 1,896 cm3 Bore diameter: 79.5 mm Stroke: 95.5 mm Compression ratio: 19 Max. power output: 77 kW at 4000 rpm-1 Max. torque: 240 Nm at 1800-2200 rpm-1 Engine management: BOSCH EDC15P+ Fuel: Diesel at least 49 CN Exhaust gas aftertreatment: Exhaust gas recirculation, oxidation catalytic converter Emission standard: EU4, EU4+DPF100020003000 n (min-1)40005000Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted SP64_33 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�*) The engine with the engine code letters BMS is shown on the figure18GB Fuel systemFuel tankThe fuel tank of the ŠkodaFabia II was taken over by the previous model. The tank is made of high-molecular low pressure polyethylene. The fuel tanks for petrol and diesel engines are shaped identically, however they differ in the fuel vapor line. The tank for petrol and diesel engines covers about 45 litres, of which 7 litres are the reserve. Directly in the tank is an electrical delivery pump, which delivers the fuel to the engine.Fuel tank - petrol enginesGravity valve Filler neckExpansion reservoir (ventilation during operation)Activated charcoal filterProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Fuel lineCable to activated charcoal reservoir Ventilation cableElectrical fuel pumpFuel filter with pressure regulatorSP64_49Fuel tankNote: In order to prevent hydrogen - molecules penetrating through the reservoir walls, the reservoir wall is fluidized.GB19 Fuel systemActivated charcoal filter The activated charcoal filter serves to collect fuel vapors which result from the warmth in the tank. The vapors collect themselves in the tank and if they reach a certain pressure, they are led via the electromagnetic valve N80 back to the engine. The filter is fastened to the filler neck. The electromagnetic valve N80 is directly attached at the intake manifold of the engine.Line of vapors from the fuel tankExhaust pipe to intake manifold of engineSP64_71Petrol steam line of fuel tankGravity valveFiller neck Expansion reservoir (ventilation during operation)Electrical fuel pump Ventilation cableFuel lineFuel tankProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP64_5020GB Schematic representation of the fuel system - petrol enginesThe fuel is delivered from the fuel tank with an electrical delivery pump via the fuel filter with pressure regulator. The pressure regulator provides for the necessary pressure of 0.4 MPa in the entire fuel system, up to the injection units, the excess fuel is led via a return pipe back into the tank. The ventilation was taken over by the previous Fabia model.Gravitational valve (roll-over valve)Operational exhaust air unitFuel unit with delivery pumpActivated charcoal filterM Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Drawn in air Fuel distributor Fuel filter with pressure regulator Electromagnetic valve of activated charcoal filterInjection unitsSP64_58Intake manifoldGB21 Fuel systemSchematic representation of the fuel system - diesel enginesThe fuel is delivered with a delivery pump via fuel filter to the injection pump. The operating pressure depends on the respective unit. The delivery pump generates in the fuel system the following system pressure: 0.05 MPa (0.5 bar) for the 1.9 ltr. TDI Engine 0.08 MPa (0.8 bar) for the 1.4 ltr. TDI EnginesPre-heating valve Fuel temperature sensorThe fuel is led from the injection pump through a fuel channel in the cylinder head to the unit injectors. The excess fuel is diverted through a returnflow in the cylinder back into the tank.Fuel cooler (only for 1.9 ltr. TDI Engine)Fuel tankMElectric delivery pumpFuel filterCheck valveNote: The fuel system of the 1.4 l TDI unit does not have a fuel cooler in contrast to the fuel system of the 1.9 ltr. TDI.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�22GB Bypass to system ventilation (e.g. for low fuel level) Pressure control valve Opening to the air bubble line from the fuel channel in the fuel return-flow channel.Return-flow hole Feed holeProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP64_59Mechanical injection pumpPressure control valveStrainerNote: You will find a detailed description of the fuel systems for diesel engines in the SSP No. 36 and SSP No. 52.GB23 TransmissionManual gearbox 02T and 02RFor the vehicle ŠkodaFabia II there are two 5-speed manual gearboxes; 02T and 02R. - the manual gearbox 02T is designed for the transfer of a torque up to 200 Nm - the manual gearbox 02R is designed for the transfer of a torque up to 250 NmTechnical main highlights: - 5 forward gears + 1 reverse gear - hydraulic actuation of the clutch - the manual gearbox and the differential gear form a unit - Inner shifting, the gearshift forks can swivel, the gearshift shaft is inserted into the gearbox from above - lifelong oil filling in the gearbox, no necessary oil change - For the gearbox 02T, the oil level check screw is located in the area differential and for the 02R next to the gearbox cover.- the gear pinions of the individual gears are po sitioned in needle bearings in order to de crease the inner frictionProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�- double synchronisation of the 1st and 2nd gear (precise shifting)The manual gearbox 02TThe manual gearbox 02RSP64_12SP64_1324GB Automatic gearbox 09GThe 6-speed automatic gearbox 09G for the ŠkodaFabia II is already used in the vehicles ŠkodaRoomster and ŠkodaOctavia II. This concerns a compact planetary gear with electrohydraulic actuation, which is characterized by a low weight and intended for vehicles with front wheel drive and engine installed crosswise. Technical main highlights: - the gearbox 09G is designed for the transfer of torque to 250 Nm - Weight 84 kg - Length 350 mm - hydrodynamic torque converter with lockup clutch - Operating mode for automatic and Tiptronic Highlights of the gearbox The six forward gears and the reverse gear are implemented by the arrangement of a simple planetary gear set with a double planetary gear set downstream (Ravigneaux planetary gear set). The planetary gear sets are arranged according to Lepelletier. Controlling the gearbox The gearbox 09G enables two operating modes: - the dynamic shift system DSP enables the selection of one of two driving modes „D“ for the usual style of driving and „S“ for the sporty drivingSP64_14- the operating mode of Tiptronic The control of the gearbox is safetly positioned by an outside electronic control unit. The hydraulic unit in the oil bath ensures actual switching of gears. Protected by copyright. Copying for private orthe commercial purposes, in part or in whole, is not permittedunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB25 Running gearDescription of running gearThe running gear of the ŠkodaFabia II consists to a large extent of the components, which have already been tried and tested for the Fabia of the 1st generation. The running gear of the ŠkodaFabia II is available in three variants. The basic version is a 13" running gear for the smallest engine variants, the 14" and 15" running gears are used depending on the engine type. • Brake pad - wear inspection• Brake and stabilization systems ABS, MABS (TCS) and ESP - BOSCH 8.0• Dual circuit brake system diagonally divided (X - allocation of brake circuit)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�• The electrohydraulical power steering is known from the ŠkodaFabia 1st generation• Brake booster with progressive brake pressure increase (dual rate characteristic)26GB • Tire pressure inspection• 14", 15" a 16" wheels with light alloy rims• Disc brakes at the front and rear axleProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP64_64• The rear torsion beam trailing arm axle originates from the ŠkodaFabia of the first generation• The suspension front axle (McPherson) was taken over by the ŠkodaFabia of the 1st generationGB27 ChassisFront axleThe front axle installed in the ŠkodaFabia II was taken over by the model series ŠkodaFabia and thus contributes to the proven driving characteristics as well as the characteristic features of this front axle: - Single wheel suspension of the front wheels with McPherson suspension strut distinguishes itself by a good driving stability and driving dynamics - weight-optimized axle elements (consoles of the assembly carrier are made out of aluminum cast iron parts) - double-row angular ball bearing integrated into the wheel hub - Disc brakes with internal ventilationShock absorber unitNote: The assembly carrier for vehicles with petrol engines was adapted in shape for installation reasons of the exhaust system.SP64_15Wheel-bearing housingAnti-roll bar Steering gearProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Track control armAssembly carrierSP64_16Depending on the engine type the steering knuckle variants for 14" or 15" running gear are installed.28GB Rear axleThe rear axle of the ŠkodaFabia II is also a tested and tried design, which was used for the first time for the ŠkodaOctavia of the first generation. This concerns a torsion beam trailing arm axle, which consists of two transverse torsion members connected with steering wheels. The axle is placed at the front side (in driving direction) on both sides into the rubber metal supports, with which the axle is fastened to the body. The helical springs are fixed at the bottom in two steel supports fastened to the towing steering wheels. At the top the helical springs are attached to the frame side rail of the body. Thus the noise transfer into the passenger compartment is reduced. The shock absorbers are accommodated behind the helical springs (in the driving direction).Fastening points to the bodyShock absorberProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Helical springTowing steering wheelAnti-roll bar Torsion memberSP64_18GB29 ChassisSteeringThe steering of the ŠkodaFabia II just like the front axle is taken over by the model Fabia. It is an electrohydraulic rack pinion power steering, which offers an exact track guidance to the car at higher speeds as well as a high measure of driving convenience during the parking procedures. For the electrohydraulic power steering, the hydraulic pump is driven with an electric motor and thus remains independent of the engine gear. The variable steering rigidity which depends on the driving speed and the steering rotating speed contributes to the increase in safety and driving convenience. This means that the reinforcement effect is higher e. g. during parking procedures and lower in case of fast driving on the motorway. For this purpose a sender is accommodated above the steering body that transmits the information about the speed of the steering wheel rotation to the power steering control unit. The detail about the driving speed is taken over by the CAN databus line.in two axles adjustable steering columnPower steering senderSteering gear of the power steeringhydraulic control unit of the power steeringSP64_17All model variants of the ŠkodaFabia II are equipped in series with the power steering - with exception of the basic variant: 1.2 ltr./44 KW MPI engine without steering anti-roll bar, 13" wheels, 13“ FS-II brakes with wheel bearing diameter 66 mm without air conditioning system.Note: You will find a detailed description for the function of the electrohydaulic power steering in the SSP No. 34.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�30GB Brake systemFor the ŠkodaFabia II a dual circuit-diagonally partitioned brake system (X arrangement) is used. The electronic brake and stabilization systems offered for the ŠkodaFabia II were developed by the company BOSCH. This is the eighth generation of these systems (BOSCH 8.0): - ABS BOSCH 8.0 - MABS (TCS) BOSCH 8.0 - ESP BOSCH 8.0 Brake booster The vehicles equipped with the brake or stabilization systems ABS, MABS or ESP are equipped according to standard with brake booster with „dual rate“ function. This system was already used for the model Octavia. The designation "dual rate" means that it is a brake booster with progressive brake pressure increase. The diameter of the brake booster is 8.5".For vehicles without ABS, MABS or ESP a load Note: Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted controller according to standard is used similar as unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability You will find a detailed description respect to theFabia. correctness of information in this document. Copyright by ŠKODA AUTO A. S.� for with the model for the function of the brake booster with "dual rate" function in the SSP No. 58.SP64_56Note: If the vehicle is equipped with the 15" running gear, the ABS System is always installed.Note: The vehicle versions intended for EC countries are equipped according to standard with ABS.GB31 ChassisHydraulic control units for the brake and stabilization systems The hydraulic control unit consists of: - Hydraulic unit with hydraulic pump and electric motor - Control unit Hydraulic control unit ABS BOSCH 8.0 and MABS BOSCH 8.0 In the vehicles ŠkodaFabia II are installed optionally the hydraulic control units ABS BOSCH 8.0 and MABS BOSCH 8.0. The technical main highlights: - Antilock braking system (ABS) - Electronic braking force distribution (EBV) - Engine brake torque control system (MSR) Apart from the functions mentioned above the hydraulic control unit MABS BOSCH 8.0 has additionally also the function of the traction control system (TCS). The function of the traction control system (TCS) is implemented via the engine control unit, i.e. without active brake interference. Hydraulic control unit ESP BOSCH 8.0 As a special equipment for the vehicle ŠkodaFabia II the hydraulic control unit ESP BOSCH 8.0 is supplied with the integrated brake pressure sender. In comparison to the hydraulic control unit ABS BOSCH 8.0 and/or MABS BOSCH 8.0 this equipment has additionally: - electronic stability program (ESP) - Hydraulic brake assistant (HBA) - Traction control system (TCS)* - Electronic differential lock (EDL)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP64_25 SP64_24Note: With regard to the fact that the hydraulic control unit ABS and/or MABS implements fewer functions in relation to the hydraulic control unit ESP, it is smaller and easier. * The control unit MABS BOSCH 8.0 is equipped in series with the function traction control system (TCS)32GB Brake assignmentThe disc and drum brakes of the ŠkodaFabia were taken over by the Fabia of the 1st generation. Engine Front wheel brake 13" Running gear FS - II Ø 239 mm x 18 mm Rear wheel brake Ø 200 mm x 40 mm1.2 ltr./44 kW - MPI 1.2 ltr./51 kW - MPISP64_21SP64_4814" Running gear FS-III Ø 256 mm x 22 mm 1.2 ltr./44 kW - MPI + ESP* 1.2 ltr./51 kW - MPI + ESP* 1.4 ltr./63 kW - MPI** 1.6 ltr./77 kW - MPI** 1.4 ltr./51 kW - TDI PD* 1.4 ltr./51 kW - TDI PD + ESP* 1.4 ltr./59 kW - TDI PD**Ø 200 mm x 40 mmSP64_21C 38 Ø 232 mm x 9 mmSP64_20SP64_23Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�15" Running gear C 54 - II Ø 288 mm x 25 mmØ 200 mm x 40 mmSP64_211.9 ltr./77 kW - TDI PD**SP64_22C 38 Ø 232 mm x 9 mmSP64_23*) only drum brake on the rear axle **) for ESP, only disc brake is possibleGB33 ChassisWheels and tiresThe ŠkodaFabia II has standard steel wheels for the equipment variants Fabia, Classic and Ambiente and light alloy wheels for the equipment variants Sport and Elegance. Depending upon the vehicle variants, the wheels of the size 13", 14", 15" or 16" are offered. The customer can select other light alloy wheels from the wide range of Škoda Original Accessories.Overview of steel wheels and wheel trims - series equipment PLUTO DRACO CASTOR HERMES5.0J x 13" HZ 35 Tyres 155/80 R13Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�5.0J x 14" HZ 35 Tyres 165/70 R146.0J x 14" HZ 37 Tyres 185/60 R146.0J x 15" HZ 43 Tyres 195/55 R15Overview of light alloy rims - series and special equipment ATIK ANTARES ATRIA6.0J x 14" HZ 37 Tyres 185/60 R146.0J x 15" HZ 43 Tyres 195/55 R156.5J x 16" HZ 43 Tyres 205/45 R1634GB Overview of light alloy rims - Škoda Original Accessories FUN SHELL AVIOR5.0J x 14" HZ 35 Tyres 165/70 R146.0J x 14" HZ 37 Tyres 185/60 R146.0J x 15" HZ 43 Tyres 195/55 R15LINEBEAR6.0J x 15" HZ 43 Tyres 195/55 R156.5J x 16" HZ 43 Tyres 205/45 R16Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Note: The overview of the wheels and wheel covers corresponds to the status at purchase.GB35 Occupant protectionAirbag systemThe airbag system intended for the ŠkodaFabia II offers front airbags for the driver and front passenger, two side airbags and for highest possible safety of the passengers optionally also two head airbags. Note: For EC countries, all vehicles are equipped according to standard with two front and two side airbags.Elements of the airbag system The airbag system consists of: - Airbags - Crash sensors - Central control unit for airbag - Electrical installation - Switch for switching off the front passenger airbagsAirbag volume: - Driver airbag: 64 l - Front passenger airbag: 120 l - Side airbag: 12 l - Head airbag: 25.5 lProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�36GB Note: If necessary it is possible to deactivate the front passenger airbags (front as well as side airbag) by the switch accommodated on the right side of the dash panel.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP64_57GB37 Occupant protectionRestraint and safety systems (belts)The ŠkodaFabia II is equipped, like its predecessor with three point seat belts at the front as well as at the rear seats. The seat belts at the front seats are equipped additionally with belt tensioners, which function according to the principle of the rack pinion - as for the ŠkodaRoomster. In comparison with the first generation of the Fabia, the equipment of the middle seat of the rear bench with complete three-point seat belt is new. This is anchored in the backrest of the rear bench.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP64_62TopTether System - further developed Fastening of the child seatNew for the ŠkodaFabia II is the system for child seat fastening TopTether. The TopTether designation stands for the three point attachment of the child seat. The child seat is tensioned in the lower part of the ISOFIX fixing eyes according to standard. The upper part of the child seat is fastened with the seat belt and the fastening hook (a component of the child seat) above the upper section of the backrest to the fastening eye on the rear side of the backrest in the vehicle.SP64_63Fastening eye38GB Pedestrian protectionIn order to avoid serious injuries in case of collision with the pedestrians, the ŠkodaFabia II is equipped in the front end area with special measures for the protection of the pedestrians. Like that the front bumper is equipped with an additional strut and a foam material filling. Additional strut The strut is made of plastic and is located at the lower part of the bumper, which improves its total rigidity. In case of possible collision with a pedestrian, the pedestrian is not pulled under the wheels, which could cause substantially severe injuries, but lifted up by the impact onto the engine bonnet.SP64_51additional strutFoam material filling The filling consists of polypropylene foam and is located under the front part of the bumper at the cross member. It serves for the absorption of energy released in case of a collision at low speed (max. up to 40 km/h) and decreases the risk of serious injuries to pedestrians.front bumperSP64_52Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Foam material fillingNote: The ŠkodaFabia II is the first vehicle in the VOLKSWAGEN company, which fulfills the law requirements for pedestrians (2003/102/EU).GB39 Heating and Air conditioning systemJust as for its predecessor, the ŠkodaFabia II is offered with two variants of heating and ventilation system. - Heating and ventilation system - Climatic (semiautomatic air conditioning and heating system) To increase the comfort and ensure optimal temperature conditions in the interior under all circumstances, the ŠkodaFabia II - new in comparison with the previous Fabia, can be equipped with fully automatic air conditioning system Climatronic.ClimatronicThe fully automatic air conditioning system Climatronic All variants of the heating and ventilation systems are based on the same basic module. There are differences in the actuation of the control flaps. For climatronic, all air distribution flaps are operated electrically via servo motors. The fresh air, air flow and re-circulating air flaps are operated together via a segment group and with the V71 control motor.Central flap Defroster flapEvaporatorAir flow flap control motor V71 (for variant Heating/Climatic - control motor for freshair/re-circulating Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted flap V154 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept air any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Fresh air flapControl motor for defroster flap V107Fresh air blower V2Re-circulating air flap Control motor for temperature flap V68 Control motor for central flap V70Dust and pollen filter Heat exchangerSP64_72Auxiliary heating element Z3540GB Climatronic Operating unitOn/Off switch; setting the ventilator speedSetting the desired interior temperatureButton for air flow to the windscreen - defrostRe-circulation switch (air circulaSP64_69 tion)automatic mode of ClimatronicButton for air flow to the legsButton for air flow to the middle body areaButton for air vent of head areaECONOMY switch - switches AC offDust and odour filterTo prevent harmful or unpleasantly smelling air particles penetrating into the vehicle, the heating and air conditioning systems are equipped with the dust and odour filter. The heating and ventilation system is equipped with a dust filter. The Climatronic and Climatic systems are also equipped with the dust filter, which is extended additionally by the odour filter function. In order to be able to fulfill this function, the filter fleece is Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted SP64_26 layered with activated charcoal. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�combined filterNote: If the filter is replaced, it is possible to use upon request from the customer every filter independently of whether the vehicle is equipped with the Climatronic or Climatic system or only with heating.GB41 Electrical systemThe fuse boxes and relay places in the electrical systemThe electrical system in the ŠkodaFabia II is decentralized. Due to different installation conditions the fuse and relay boxes are located in different places in the vehicle. The components are decentralized. This means that they are in the proximity of their associated components and function groups. The function of the overall system in the vehicle is controlled by a series of specialized control units . The communication between the control units and other function groups of the electrical system is performed via CAN databus.Fuse box in engine compartmentcontrol Protected by copyright. Copying for private or commercial purposes, in partOnboard or in whole, issupply not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability J519 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�unitFuse box42GB Coupling point of A-pillarCoupling point of B-pillarProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP64_74Additional relay carrier under the dash panelGB43 Electrical systemThe fuse boxes and relay places in the electrical systemT16 G419J217J...J500J104J234J519Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�J393J255/J301J446J527J412J386J387J388J38944GB Legends:G85 G419 J… J104 J217 J234 J255 J285 J301 J386 J387 J388 J389 J393 J412 J446 J500 J503 J519 J527 J745 R94 T16 Steering angle sender Sensor unit for ESP Engine control unit ABS with ESP control unit Automatic gearbox control unit Airbag control unit Climatronic and air conditioning system control unit Dash panel insert control unit Climatronic and air conditioning system control unit Driver side door control unit Front passenger side door control unit Rear left door control unit Rear right door control unit Central control unit for convenience system Control unit for operating electronics of the mobile phone Parking aid control unit Steering aid control unit Control unit with display unit for radio Onboard supply control unit Multi-function steering wheel control unit Cornering light and headlight range control unit Infotainment Gateway Diagnostic connectionJ745G85J285 Maxi DOTJ503R94Drive CAN databus CAN data bus diagnosis LIN busJ503CAN databus drive train CAN TP 1.6* databus convenienceProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted CAN TP unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�2.0* databus convenienceSP64_70CAN databus diagnosis LIN data bus K cable separate databus*) Version of the transport protocol GB45 Electrical systemCAN data bus diagnosisTransmission speed 500 kbit/s The CAN bus for diagnostic purposes serves as data exchange between the diagnosis unit VAS 5051/5052 and the Gateway unit, which are integrated in the onboard supply control unit system in the vehicle. It is used here only for special development purposes. For communication with the diagnosis unit VAS 5051/5052 the Gateway unit uses the K-line.Onboard supply control unit J519Control unit in dash panel insert J285SP64_76Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Diagnostic connection T1646GB Drive CAN databusTransmission speed 500 kbit/sCornering light and headlight range control unit J745Airbag control unit J234Control unit in dash panel insert J285ABS and ESP control unit J104SP64_77Onboard supply control unit J519Automatic gearbox control unit J217Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted J... or accept any liability unless authorisedtrol by ŠKODA A. S. ŠKODA AUTO A. S. does not guarantee unit AUTO J500 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Steering aid con-Engine control unitGB47 Electrical systemCAN - BUS ConvenienceTransmission speed 100 kbit/sControl unit with display Control unit with display unit for radio and naviga- unit for radio and navigation system J503 tion system J503 Air conditioning system control unit J255 or J301Control unit in dash panel insert J285Central control unit for convenience system J393Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Parking aid control unit J446SP64_78Multi-function steering wheel control unit J527Control unit for operating electronics of the mobile phone J412Onboard supply control unit J51948GB LIN data busTransmission speed 19.2 kbit/sFront passenger side door control unit J387Door control unit rear right J389Rear left door control unit J388SP64_79Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Driver side door unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability unit J386 with respect to the correctness of information in this document. Copyright by Šcontrol KODA AUTO A. S.�GB49 Electrical systemMain headlight - equipment versionsFor the ŠkodaFabia II 3 versions of the main headlights were developed.1) Fixed headlight with the halogen reflector H4, acrylat - windshield, which is intended for the standard - equipment.SP64_532) Protected Fixed by Bi-halogen headlight with DE-moducopyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability le H7, which uses a projection lens for light with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� scattering on the roadway, similar to the xenon headlights.SP64_543) As special equipment, the customer can select swivelling Bi-halogen headlights with DE-module H7 and independent fog lights with the Corner Light function.SP64_5550GB The swivelling halogen headlightsFor the ŠkodaFabia II, the swivelling halogen headlights with DE-module H7 are available within the auxiliary equipment possibilities. Its design is based on the fixed headlight with DE-module H7, however it has additionally the swiveling module, which laterally swivels the light cone depending on the angle of rotation of the steering wheel. The headlights swivel 15° from the middle axis of the car to the car exterior and 7.5° to the car interior. The headlights are swivelled if: - the steering wheel is turned - the engine runs - the car speed is more than 3 km/hr - the light / main beam is switched on - the reverse gear is not engaged The swivelling main headlights serve particularly for lighting up corners with larger radii and owing to their design can be used even at higher speed.15SDgr7.5SDgr 0SDgrSP64_61Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Note: For the ŠkodaFabia II the swivelling main headlights are always combined together with the fog headlights with Corner Light function.Note: You will find a detailed description of the swivelling main headlights in the SSP No. 63.GB51 Electrical systemFog light with the "Corner light" functionThe main headlights can be supplemented with independent fog headlights, which are integrated in the lower range of the bumper. As a special equipment the fog headlights can be equipped with the function of the active turning light - the so-called „Corner Light“ function. This function switches on individually the fog headlight on the left or right side, which as necessary for the forthcoming maneuvers was evaluated - depending on the steering wheel turning angle and switching on of the turn signals. Conditions for activating the „Corner Light“ function: - the engine runs - the vehicle speed is less than 40 km/hr - the light/main beam is on - the fog lights are switched on - the reverse gear is not engaged - the warning lights are not switched on - the turning signal was switched on to the right and/or to the left - the rotation angle for switching the „Corner Light“ function was exceeded The fog headlight lights up a broad field at the side of the wheel track within the range of -30° to +60° of the straight car axle. Individually switched on fog headlights help to improve the view with bending and park maneuvers particularly in cities on crossings and exits. The switching on/off of the lights is performed in such a way that the field exposed by the main headlights is extended in a natural way.+60SDgr-30SDgrSP64_60Note: You can find the detailled descripton for the fog headlights with the „Corner light“ function in the SSP No. 63.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�52GB Tyre pressure monitorFor the increase of active safety the ŠkodaFabia II is equipped with an automatic pressure monitor of the air filling in the tires. The tire circumference depends on the air pressure in the tires. The tire air pressure is monitored by the software, which is a component of the ABS control unit. The ABS control unit compares the peripheral speeds of all 4 wheels and it determines the drop in air pressure of the tyres from the determined values and their deviations. If the air pressure in the tire drops around more than about 20%, this fact is indicated by a control light in the instrument cluster lighting up and accompanied simultaneously with a brief acoustic signal.SP64_65unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability Multi-function module below the with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� steering wheelProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permittedWith the multi-function module under the steering wheel, with which the ŠkodaFabia II is equipped, the frequently used functions of the car radio, and/or the mobile phone can be operated as for the multi-function steering wheel without the driver having to remove the hands from the steering wheel. This contributes to the increase of comfort and safety when steering. The multi-function module is accommodated at the left side of the steering column trim panel. The electronics for the evaluation of button actuation or the rotation of the rolling knob is integrated in the module. The communication and diagnostics are performed by the CAN bus convenience. The multi-function module is active, i.e. to send ready for use instructions of the car radio and/or the mobile phone if the ignition is switched on.SP64_75GB53 Electrical systemAudio systemThe offer of original audio equipment for the ŠkodaFabia II is 2 radios, 2 radio navigation systems and an external CD player.Car radio BeatThe car radio Beat is a representative of the base class, it is a so-called 1-DIN equipment and is the basic model amongst the car radios for the ŠkodaFabia. Technical basic parameter - Power output 4 x 20 W - Tuner with RDS and FM/AM reception range - Memory for storing up to 30 stations - Possibility to connect a hands-free system for mobile phone - Possibility to connect an external CD playerSP64_66Car radio DanceProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The high class of the car radios for the ŠkodaFabia II is represented by the radio Dance. This so-called 2-DIN car radio offers a whole series of useful functions to the user. Technical basic parameter - Power output 4 x 20 W - Tuner with RDS and FM/AM reception range - Memory for storing up to 36 stations - Possibility to play the CD in the format CD-Au dio, CD-R, CD-RW, multisession and MP3 - integrated CD player for 1 CD - Possibility to connect an external CD changer - Possibility to connect a hands-free system for mobile phone - if the vehicle is equipped with parking aid, the car radio shows a schematic representation of the distance to the obstacle - Outside temperature and date - Possibility of operating via multi-function module below the steering wheelSP64_6754GB Satellite navigation system Lowline- indicates the remaining distance (km) up to the specified destination - indicates the distance to the announced change of direction (also on DOT display in the instru ment cluster) - Warnings about traffic obstacles (TM announce ments) + dynamic destination navigation (DX navigation) - Function CORRIDOR* Mode of operation for radioSP64_68The radio navigation system Lowline provides the user with the exact and current information about the traffic conditions in the surrounding. Thus it contributes to the increase of comfort when travelling and to the safety in the road traffic. Technical basic parameter Mode of operation for navigation- Waveband ranges FM + TP and AM - 18 memory spaces per waveband range FM and 12 memory spaces per waveband range AM - RDS-EON-PTY (expanded RDS functions) - Traffic messages (TIM) - Function GALA (adaptation to the volume in line with the driving speed) - Playing audio CDs in the drive of the equipment - integrated CD playing device enables the play ing of CDs in the MP3 format and assists ID3 tags (information about the album, the inter preter etc.)- Schematic representation of information for General data route guidance on the DOT display in the instru ment cluster - commercial monochromatic display with green background Protected by copyright. Copying for private or purposes, in part or in whole, is not permitted - linguistic and visual routeunless guidance (representa authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability lighting with respect to the the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� tion of the map and the symbols on display) - Connection to DOT display in the instrument - Route guidance by means of navigation sym cluster bols (arrows) - controllable also via the multi-function steering - indicates the arrival time at the destination and wheel the remaining travel duration - indicates to the driven road, if possible the Supplement equipment next road (also on DOT display in the instrument cluster) - CD changer for 6 CDs - Input for hands-free telephone system * CORRIDOR is a function, which enables the equipment to transfer the data after calculation of the route to the internal memory and to keep the vehicle on the selected route, without the navigation CD being in the drive. If the vehicle leaves the fixed corridor, the driver is requested to insert the navigation CD in order to calculate again the changes of the route and the route guidance. This function makes it possible while driving to play audio or MP3 CDs in the drive of the equipment.GB55 Electrical systemNavigation system ViaMichelinSP64_27SP64_28In the offer of the Škoda original accessories for ŠkodaFabia II is the portable navigation system ViaMichelin available. This equipment can later be installed by the authorized Škoda service. For the assembly however a pre-installation is necessary, which must be indicated when ordering the vehicle. Technical Data: - Mass in mm: 121x71x19 - Weight: 138 g - Display: 3.5“ (8.9cm) QVGA-LCD (320x240 Pixel) - Operating voltage: 5V - Battery integrated, battery mode up to 5 hours - Communication interface: Mini-USB - Software platform: Windows CE.net 4.2 - Language selection menu: DE, EN, ES, FR, IT, NL - Language selection of sound output