TECHNICAL DOCUMENTATION
SSP 065 Škoda Superb II Presentation of the vehicle part I

This PDF is currently unavailable.
Read document text
ServiceŠkodaSuperb IIPresentation of the vehicle part I65Self-study programmeThe individual design concept of the ŠkodaSuperb makes it a fascinating vehicle. The spaciousness of the interior and the materials used increase the already exceptional driving convenience.the new ŠkodaSuperb combines the practical advantages of a liftback with the elegance of a sedan body.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The unique system for opening the Twindoor tailgate represents an original technical innovation which allows you to have high flexibility when loading and unloading objects of different sizes. If you wish to place smaller luggage items in the luggage compartment, you just need to open the bootlid as on a classical sedan body. The transportation of an extensive load is however not a problem for the new ŠkodaSuperb. It is possible to open the tailgate together with the rear window by means of the Twindoor system - in the same way as on vehicles with a liftback body. Now you can more easily reach the luggage compartment with a volume which can be increased up to an impressive 1670 litres by folding down the rear seats.GBContentsŠkodaSuperb II Vehicle dimensions Body Combination of engines and gearboxes Engines Fuel system Transmission Chassis 4 6 8 16 18 24 26 30You will find notes for the assembly and disassembly, repair and diagnostics as well as detailed user information in the SSP, in the diagnosis unit VAS 505x and in the on-board literature. The time for going to press was on the 04/2008. This brochure is not subject to an update.GBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�ŠkodaSuperb IIŠkodaSuperb II: short introduction• Driver's knee airbag• crosswise position of the 3.6 ltr. engine VR concept with FSI technologyProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�• Park assist (PA)• Bi-xenon headlights• “Intelligent“ front headlights• automatic 7-speed gearboxGB• 9 airbags• electric tailgate lock tightener• Four-wheel driveSP65_11• separate opening of the Twindoor tailgate• central locking with remote control mounted in series; electrical opening of all the windowsProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GBVehicle dimensionsOuter dimensions of the vehicle9642761 48381113SP65_01Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�1545 1817SP65_021518 2009SP65_031462GBInner dimensions of the vehicle988956953-11971004-742522565 lSP65_071545 19391082SP65_17711SP65_18Weight and volumeAir resistance correction value cx Luggage compartment volumeProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�0,30565 l 1670 l 60 l 1425 - 1665 kg 620 kgLuggage compartment volume after folding down the rear seats Tank volume Unladen weight1) Vehicle loading capacity1)1) Depending on the unit fitted and on the special equipment of the vehicle.GBBodyThe body and its characteristic featuresThe goal pursuit in the development work of the ŠkodaSuperb II vehicle body was to create a body which fulfils the continuously increasing safety and dynamic requirements. The development work on the ŠkodaSuperb II body was carried out by means of most modern mathematical calculation methods and models. Optimal body profiles including a high rigidity were therefore ensured.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GBStructure of the bodyFollowing the previous generations of Škoda vehicles modern high-tensile steel, which is divided in several categories according to its fluidity limit, was also used on a large scale for the ŠkodaSuperb II body. By using high-tensile steel, a higher firmness of the individual body parts was achieved while preserving a relatively low weight. On the ŠkodaSuperb II body, effective modern technologies of sheet metal processing were used: among others, hot forming, flexible roll forming or laser-welded sheet metal laminations - so-called Tailored Blanks. For the first time a hot formed high-tensile steel was used in the area of the front wall or the middle tunnel on the ŠkodaSuperb II body. This design ensures higher passenger safety during a frontal impact.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP65_61Firmness of the used sheet metals Rp0.2 180 MPa Rp0.2 180-300 MPa Rp0.2 300-500 MPa Rp0.2 500-1200 MPa Rp0.2 - yield strengthThe percentage of the individual sheet metal types13% 19%19% 49%SP65_31GBBodyThe tailgate – TwindoorŠkodaSuperb II is an absolute novelty. This is a multifunction system which enables the opening of either a small or a large tailgate version. There are two "Softtouch" micro switches on the tailgate for the operation of both operating modes. One of the micro switches is located as usual in the centre on the lower side of the flap, the other one on the right of it. The complete multifunction system is coordinated by the onboard BCM* supply control unit.* You will find a detailed description of the onboard BCM supply control unit function in the SSP No. 66.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP65_281 2 3 4 5 6Onboard BCM supply control unit Locking motor (electric motor) Tailgate lock Micro switch for opening the small/large tailgate Micro switch for switch-over of the locking mechanisms electric tailgate lock tightener10GBSmall tailgate – luggage compartment flap The opening of the luggage compartment flap is possible by pressing the micro switch A in the centre on the lower side of the flap. After operating this micro switch, the luggage compartment flap opens by means of the gas pressure springs. The luggage compartment flap can also be opened by pressing the middle button (approx. 3 seconds) on the remote control of the central locking.The complete automatic opening of the luggage compartment flap to its highest position is ensured up to a temperature of 0°C. It is possible that the flap does not open completely below 0°C due to the low temperature and that it must be operated manually.SP65_32Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP65_34SP65_09AGB11BodyThe function principle of the locking mechanism for opening the luggage compartment flapFixed arm In combination with the luggage compartment flapElectric motormoveable armProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Hinge cam Hinge camsSP65_23Bolt Hinge boltsLuggage compartment flap – basic operating mode The fixed arm attached at the upper part of the tailgate is secured with a hinge bolt via a hinge cam and connected to the body in this way. The bolt attached on the movable arm is not locked with the hinge cam, the movable arm is unlocked in this way and enables the opening of the luggage compartment flap.12GBLarge tailgate Both micro switches are used for opening the tailgate. After pressing the micro switch B on the right, both locking mechanisms are switched over from the operating condition of the luggage compartment flap (basic operation) into the operating condition of the large tailgate. This procedure lasts maximum two seconds; it is indicated by the third brake light flashing two times. Subsequently, the micro switch A in the centre on the lower side of the flap is pressed and the large tailgate can be opened. If the large tailgate does not open within 15 seconds after the switch-over of the locking drives, the locking mechanisms return again into the operating condition for the luggage compartment flap (basic operation). The reverse switching in the basic operation does only occur if the tailgate lock is completely closed.BSP65_34SP65_19AProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The function (the switch-over) of the locking mechanisms is only active if the tailgate lock is closed in the second position.GB13BodyThe function principle of the locking mechanism for opening the large tailgate.Fixed arm In combination with the luggage compartment flapElectric motorMoveable armHinge cam Hinge camSP65_24Bolt Hinge boltsLarge tailgate The electric motor turns the locking cam into the second final position, therefore the hinge bolt is unlocked and the position of the hinge cam is altered. A functional unit is created from the movable arm and the fixed arm by combining the hinge cam with the pivot. This enables the opening of the large tailgate. Opening the tailgate lock in case of emergency. If the tailgate lock is blocked (if the lock does neither react to the commands of the micro switch nor to the remote control of the central locking), then the flap can be emergency opened mechanically. For this purpose, the textile lining in the lock area is cut into. A screwdriver or possibly an ignition key can be inserted into the left edge position of this cut-in and moved in the direction of the bore to the other final position. Therefore the tailgate lock is manually unlocked and the tailgate can be opened.SP65_37Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�14GBElectric tailgate lock tightenerAn electric tailgate tightener is installed in the ŠkodaSuperb II for the higher convenience when closing the tailgate.Cover of the electric motor and the gear ratio housingSpring Tightening arm Spring Electric motor Gear ratioOperating mechanismSP65_64Function Close As soon as the tailgate lock latches into the first position in the tightening arm, the electric motor alters the operating mechanism in the direction of the arrow A which subsequently moves the tightening arm in the direction of the arrow B. Through this, the tailgate lock is pulled into the final position (second position). Locking principle Open The electric motor adjusts the operating mechanism in the direction of the arrow A. The tightening arm moves in the direction of the arrow B; thus the tailgate is unlocked.Unlocking principleBBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�ASP65_66ASP65_65GB15Combination of engines and gearboxesCombinations of engines and gearboxesPetrol engines EngineFront-wheel driveTransmissionFour-wheel drive1.4 ltr./92 kW - TSI6-speed manual gearbox 0AJ (MQ 200-6F)1.8 ltr./118 kW - TSI6-speed manual gearbox 02S (MQ 250-6F)6-speed manual gearbox 02Q (MQ 350-6A)Automatic 7-speed gearbox 0AM (DQ 200-7F)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�3.6 ltr./191 kW - FSIAutomatic 6-speed gearbox 02E (DQ 250-6A)16GBDiesel engines EngineFront-wheel driveTransmissionFour-wheel drive1.9 ltr./77 kW - TDI PD5-speed manual gearbox 0A4 (MQ 250-5F)2.0 ltr./103 kW - TDI PD6-speed manual gearbox 02Q (MQ 350-6F)Automatic 6-speed gearbox 02E (DQ 250-6F)2.0 ltr./125 kW - TDI CR6-speed manual gearbox 02Q (MQ 350-6F)6-speed manual gearbox 02Q (MQ 350-6A)Automatic 6-speed gearbox 02E (DQ 250-6F)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB17Engines1.4 ltr./92 kW petrol engine – TSIThe 1.4 ltr./92 kW engine is an additional representative of the TSI engine series and the basic drive unit for the ŠkodaSuperb II. This engine is used here for the first time in Škoda vehicles. Technical highlights - - - - - - - - - 4-valve technology Grey cast iron-cylinder block homogeneous operation during the fuel injection Turbocharger with electrically controlled wastegate Two-circuit cooling system Liquid-cooled charge air cooler High pressure fuel pump with integrated pressure relief valve Suction pipe line without adjustable regulating flaps Adjustment of the inlet camshaftSP65_68Power output and torque diagramTechnical Data Engine code letters: Type: Number of cylinders: Valves per cylinder: Displacement: Bore diameter: Stroke: Compression ratio: Max. power output: Max. torque: Engine management: 100 90 80 70 P (kW) 60 50 40 30 20 10010002000 3000 4000 5000 6000 n (min-1)CAXC Inline engine 250 4 225 4 200 1390 cm3 175 76,5 mm 75,6 mm 150 10 :1 125 92 kW at 5000 min-1 100 200 Nm at 1500 - 4000 min-1 75 Bosch Motronic MED 17.5.20 50 Fuel: unleaded Petrol RON 95 25 (or RON 91 with low reduction in performance) 7000 Exhaust after treatment: Three-way catalytic converter; lambda conProtected by copyright. Copying for private or commercial purposes, in part or in whole, probe is not permitted SP65_42 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. trol does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Emission standard: EU4 PlusM (Nm)18GB1.8 ltr./118 kW petrol engine - TSIThe 1.8 ltr./118 kW engine is a further stage of development of the TSI engines. This engine reaches a high power output owing to the advantages of the FSI technology and corresponds ** to the newest emission standard EU5. Technical highlights - 4-valve technology - Grey cast iron-cylinder block - balance shafts located in the cylinder block of the engine - integrated oil pump is driven via a chain by the crankshaft - Adjustment of the inlet camshaft - adjustable regulating flaps in the suction pipe line - Multi Point-High pressure-Injection units - exhaust turbocharger integrated in the exhaust manifold - Charge pressure control - Turbocharger with electrically controlled wastegate - Homogeneous regime of cylinder filling Power output and torque diagram Technical Data300SP65_67120 110 100 90 80 70 P (kW) 60 50 40 30 20 10** *010002000 3000 4000 5000 n (min-1)Engine code letters: BZB; CDAA Type: Inline engine Number of cylinders: 4 275 Valves per cylinder: 4 250 Displacement: 1798 cm3 225 Bore diameter: 82,5 mm Stroke: 84,2 mm 200 Compression ratio: 9,6 :1 * 175 Max. power output: 118 kW at 5000 - 6200 min-1* ** 150 118 kW at 4500 - 6200 min-1** Max. torque: 250 Nm at 1500 - 4200 min-1* 125 250 Nm at 1500 - 4500 min-1** 100 Engine management: Bosch Motronic MED 17.5 Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Fuel: petrol 75 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A.unleaded S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S.� low RON 95 (or RON 91 with 50 reduction in performance) 25 Exhaust after treatment: Three-way catalytic converter; linear lambda probe before 6000 7000 the catalytic converter;*; linear lambda probe before the catalytic converter and jump probe SP65_43 after the catalytic converter** Emission standard: EU4*; EU5**M (Nm)* Valid for engines with the code letters BZB GB** Valid for engines with the code letters CDAA19Engines3.6 ltr./191 kW petrol engine - FSIThe 3.6 ltr./191 kW engine is the first representative of the VR concept with FSI technology which is available for Škoda vehicles. This engine has a high power output and a high torque with a relatively low fuel consumption owing to its large engine displacement and the use of the FSI technology. The FSI technology with direct injection also ensures that the imposed emission standard EU4 Plus is fulfilled. Technical highlights 4-valve technology with roller rocker arm inner exhaust gas recirculation grey cast iron-cylinder block discharge integrated high pressure pump for fuel and oil driven by a timing chain - Adjustability of the camshaft for the suction and outlet valves Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability - two-part plastic intake manifold with modified sucwith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� tion channel geometry - Coolant-circulating pump - - - - SP65_40Power output and torque diagramTechnical Data Engine code letters: Type: Number of cylinders: Valves per cylinder: Displacement: Bore diameter: Stroke: V-angle: Compression ratio: Max. power output: Max. torque: Engine management: Fuel: CDVA VR engine 6 4 3597 cm3 89 mm 96,4 mm 10,6° 11,4 : 1 191 kW at 6000 min-1 350 Nm at 2500 - 5000 min-1 Bosch Motronic MED 9.1 Super Unleaded RON 98 (or RON 95 with low reduction in performance) Exhaust after treatment: 2 Three-way catalytic converters; 2 linear lambda probes before the catalytic converter and 2 jump probes after the catalytic converter Emission standard: EU4 Plus190 180 170 160 150 140 130 120 P (kW) 110 100 90 80 70 60475 450 325 400 375 350 325 300 M (Nm) 275 250 225 200 175 150 0 1000 2000 3000 4000 5000 6000 7000 n (min-1)SP65_4420GB1.9 ltr./77 kW diesel engine - TDI PDThe 1.9 ltr./ 77 kW TDI PD engine is a proven drive unit, which was already used in previous Škoda vehicles. It represents the basic alternative within the range of diesel engines supplied for the ŠkodaSuperb II. Technical highlights - 2-valve technology - Injection nozzle pump units with solenoid valve - Turbocharger with alterable vane geometry - Version available with exhaust gas particle filter - Exhaust gas recirculation radiator - electrically controlled throttle valve in the intake manifoldSP65_69Power output and torque diagramTechnical Data100 90 80 70 P (kW) 60 50 40 30 20 10Engine code letters: BXE; BLS Type: Inline engine Number of cylinders: 4 Valves per cylinder: 2 Displacement: 1896 cm3 275 Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Bore diameter: 79,5 mm 250 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright ŠKODA AUTO A. S.� Stroke: 95.5by mm 225 Compression ratio: 18.5 : 1 200 Max. power output: 77 kW at 4000 min-1 175 Max. torque: 250 Nm at 1900 min-1 Engine management: Bosch EDC 15P+ 150 Fuel: Diesel 125 Exhaust after treatment: exhaust gas recirculation, 100 exhaust gas particle filter **; 75 oxidation catalytic converter 50 Emission standard: EU4*; EU4+DPF**25 0 1000 2000 3000 4000 5000 6000 7000 n (min-1) M (Nm)SP65_45 * Valid for engines with the code letters BXE GB ** Valid for engines with the code letters BLS21Engines2.0 ltr./103 kW diesel engine - TDI PDThe 2.0 ltr./103 kW was already used in the ŠkodaOctavia II. This engine underwent a few modifications in the context of constant further development, which include the installation of 2 balance shafts; this renewed version can be found in the new ŠkodaSuperb II. Technical highlights - 2-valve technology - System with 2 balance shafts below the crankshaft - controlled cooling of the exhaust gas recirculation - Camshaft with V-belt - electrically controlled throttle valve in the intake manifoldSP65_70Power output and torque diagramTechnical Data130 120 110 100 90 80 70 P (kW) 60 50 40 30 20 10Engine code letters: BMP Type: Inline engine Number of cylinders: 4 325 Valves per cylinder: 2 300 Displacement: 1968 cm3 275 Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Bore diameter: 81 mm unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness250 of information in this document. Copyright by ŠKODA AUTO A. S. � Stroke: 95.5 mm 225 Compression ratio: 18,5 : 1 Max. power output: 103 kW at 4000 min-1 200 Max. torque: 320 Nm at 1800 - 2500 min-1 175 Engine management: Bosch EDC 16 150 Fuel: Diesel 125 Exhaust after treatment: exhaust gas recirculation; 100 exhaust gas particle filter; oxidation catalytic converter 75 Emission standard: EU4+DPF 5025 0 1000 2000 3000 4000 5000 6000 7000 n (min-1) M (Nm)SP65_4622GB2.0 ltr./125 kW diesel engine - TDI CRThe base component of the 2.0 ltr./125 kW TDI CR engine is a 2.0 ltr./125 kW TDI PD engine which is already known from the ŠkodaOctavia II RS. Due to the increasing demands on fuel consumption, emission limit values etc., many engine components for the 2.0 ltr./125 kW TDI CR engine were improved. One of the most important design innovations is the replacement of the unit injection system with the "Common Rail" system. Technical highlights - Fuel injection system "Common Rail" with injection units controlled by a Piezo valve - electrical exhaust gas recirculation valve - Turbocharger with alterable vane geometry - Exhaust gas particle filter and oxidation catalytic converter - adjustable regulating flaps in the suction pipe lineSP65_39Power output and torque diagramTechnical Data Engine code letters: Type: Number of cylinders: Valves per cylinder: Displacement: Bore diameter: Stroke: Compression ratio: Max. power output: Max. torque: Engine management: Fuel: Exhaust after treatment: Emission standard: CBBB Inline engine 4 4 1968 cm3 81 mm 95.5 mm 16.5 : 1 125 kW at 4200 min-1 350 Nm at 1750 - 2500 min-1 Bosch EDC 17 Diesel fuel Exhaust gas recirculation; exhaust gas particle filter; oxidation catalytic converter EU4 plusProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� 140 350130 120 110 100 90 80 70 P (kW) 60 50 40 30 20 10 325 300 275 250 225 200 175 M (Nm) 150 125 100 75 50 25 0 1000 2000 3000 4000 5000 6000 7000 n (min-1)SP65_47GB23Fuel systemFuel tankThe fuel tank of the ŠkodaSuperb II was taken over by the model ŠkodaOctavia II with fourwheel drive. It is divided into two chambers due to the installation of the propshaft passing through to the rear axle. An electrical fuel delivery pump is located in the (in driving direction) right tank chamber. A suction jet pump is located in the left chamber, which functions according to the principle of the "Venturi effect" and ensures the fuel delivery in the housing of the electrical fuel delivery pump in the right tank chamber. The suction jet pump is driven by the fuel delivery pump via a lateral fuel pressure line.A float is fitted in each chamber for the accurate measurement of the fuel quantity in the tank. The float in the right chamber is a component of the housing of the electrical fuel delivery pump. The float in the left chamber is an independent body with a suction jet pump attached to the lower part of it. The tank volume amounts to approx. 60 litres, of which 7 litres are the reserve.You can find a detailed function description of the suction jet pump which operates according to the Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted principle of the "Venturi effect" in unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�the SSP No. 49.Right tank chamber Left tank chamberElectrical fuel delivery pumpSP65_14Suction jet pump24GBMeasuring device for the fuel gauge, electrical fuel delivery pump and suction jet pump.Electrical fuel delivery pumpLateral fuel pressure lineSuction jet pumpFuel gauge sender housing Fuel delivery lineFuel line to engineSuction jet pumpFuel tank with electrical fuel delivery pumpSP65_26 SP65_27Float of the measuring device for the fuel gauge GFloat of the fuel gauge sender -2G169The measurement of the fuel quantity in the tank is carried out with the control unit on the dash panel J285.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB25TransmissionMechanical gearbox 0A4 (MQ 250-5F)The mechanical 5-speed manual shift gearbox 0A4 is designed for the transfer of midrange torques. It is used for vehicles with front-wheel drive.Technical Data - - - - Weight: approx. 40 kg Clutch: Single plate dry clutch Operation mode: Manual shift Oil quantity: approx. 1.9 ltr.SP65_50Mechanical gearbox 02S (MQ 250-6F)The mechanical 6-speed manual shift gearbox by copyright. Copying private or commercial 02SProtected is designed for the for transfer of highpurposes, meanin part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability torques. It is used for vehicles with front-wheel with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� drive.Technical Data - - - - Weight: approx. 44.5 kg Clutch: Single plate dry clutch Operation mode: Manual shift Oil quantity: approx. 2.1 ltr.SP65_4926GBMechanical gearbox 0AJ (MQ200-6F)The mechanical 6-speed manual shift gearbox 0AJ is designed for the transfer of low torques. It is used for vehicles with front-wheel drive.Technical Data - - - - Weight: approx. 39-39.5 kg Clutch: Single plate dry clutch Operation mode: Manual shift Oil quantity: approx. 2 ltr.SP65_48Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Automatic gearbox 0AM (DQ 200-7F)The automatic 7-speed gearbox 0AM with direct shift gear stages is a newly developed complete gearbox, however it is based on the same principle as the gearbox 02E (double clutch gearbox) and is designed for the transfer of low and midrange torques. It is used for vehicles with frontwheel drive.Technical Data - Weight: - Clutch: approx. 72 kg two automatically controlled single plate dry clutches - Operation mode: Automatic and Tiptronic - Oil quantity: approx. 1.7 ltr.SP65_52GB27TransmissionMechanical gearbox 02Q (MQ 350-6F), (MQ 350-6A)The mechanical 6-speed manual shift gearbox 02Q is designed for the transfer of high torques and for vehicles with front-wheel drive as well as with four-wheel drive. The gearbox is fitted with axle drive for the vehicle version with four-wheel drive.Technical Data - Weight: - Clutch: - Operation mode: - Oil quantity - Gearbox: - Axle drive: approx. 55,1/68,5* kg Single plate dry clutch Manual shift approx. 2.3 ltr. approx. 0.9 ltr.Front-wheel driveFour-wheel driveProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP65_51SP65_60* The indicated values correspond to the gearbox version for vehicles with four-wheel drive (gearbox+axle drive). GB28Automatic gearbox 02E (DQ 250-6F), (DQ 250-6A)The automatic 6-speed gearbox 02E with direct shift gear stages is designed for vehicles with front-wheel drive as well as with four-wheel drive. Furthermore the version with four-wheel drive is fitted with axle drive. The gearbox was designed for the transfer of midrange and high torques.Technical Data - Weight: - Clutch: - Operation mode: - Oil quantity - Gearbox: - Axle drive: approx. 80/93* kg Two automatically controlled multi-plate clutches in oil bath Automatic and Tiptronic approx. 7.0 ltr. approx. 0.9 ltr.Front-wheel driveFour-wheel driveProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP65_53SP65_38* The indicated values correspond to the gearbox version for vehicles with four-wheel drive (gearbox+axle drive). GB29ChassisThe chassis and its features in briefThe chassis of the ŠkodaSuperb II consists to a large extent of the components which were used for the model ŠkodaOctavia II. However some of them were modified for reasons of technical installation.• electronic brake and stabilization program (ESP)• electromechanical power-assisted Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability steering with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�• 15˝, 16˝, 17˝ chassis• McPherson front axle30GB• System Driver Steering Recommendation (DSR)• Four-wheel driveSP65_12• Multi-arm rear axle• System for drying the brake discs (RBS)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB31ChassisFront axlethe ŠkodaSuperb II, the proven McPherson drive axle is used for the kinematically independant front wheel suspension. It is equipped on both sides with a triangular shaped track control arm and a wheel-guiding suspension strut. The outstanding characteristics of this type of axle could still be improved through careful further development. The result is a considerably improved agility of the chassis, improved steering accuracy and thus a noticeable improvement of the driving convenience. The lateral stability of the vehicle front was also increased, which provides for an exact and safe curve guidance of the car.Suspension strutCoupling rod of the anti-roll barAnti-roll barTrack controlProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability armwith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Console Assembly carrier Anti-vibration supportSP65_0432GBRear axleThe rear axle of the ŠkodaSuperb II has a multicomponent design. This ensures excellent driving characteristics and more stability in extreme situations. The multi-arm rear axle is formed of four semi axle arms: - Top suspension arm - Bottom suspension arm – spring arm - Track rod (suspension arm) - Trailing arm The arms are fastened in the subframe with rubber metal bearings; with which the complete rear axle is attached to the body. This design enables an optimal response to the longitudinal and transverse forces while driving. The transverse dynamics is secured by three suspension arms. The carefully defined and co-ordinated position enables an accurate setting of the kinematics and elasto-kinematics of the rear axle. The frame of the rear axle and the above mentioned arms are identical on vehicles with frontwheel drive and for the version with four-wheel drive. Only the wheel-bearing housings are different. For vehicles with four-wheel drive, the axle drive with Haldex coupling and the drive shafts are also installed in the subframe.Shock absorberTop suspension arm Rubber metal bearing for fastening Helical springBracketCoupling rod of the anti-roll bar Track rodProtected (suspension arm) by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted SubframeSP65_06unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Trailing armGB33ChassisSteeringthe ŠkodaSuperb II was already used in the model ŠkodaOctavia II. It is also an electromechanical power-assisted steering with double pinions. The easy steering is assisted by a separated transmission, which is effective on the rack pinion of the steering and is driven by an electric motor. The sender which is effective on the steering torque of the steering wheel is fitted on the steering gear and detects the height of the steering torque on the steering pinion. The communication is performed via the CAN bus dataline. The advantages of the electromechanical power-assisted steering – Reduction of the energy consumption, because the power-assisted steering only uses energy if it is in operation (when steering). – the components of a hydraulic system (servo oil pump, hoses, hydraulic oil reservoir) are not applicable – no unpleasant steering reactions on bumpy road – low noise transfer in the vehicle – the electromechanical power-assisted steering maintains a good straight course with the function "active reverse gear" and assists in resetting the steering in the straight ahead position which actively ensures the exact track guidance of the vehicle.Steering columnSteering torque senderProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Steering connecting rodSteering gear Electric motorSP65_0834GBBrake systemA dual circuit brake system with diagonal arrangement is used in the previous model ŠkodaSuperb as well as in the successive model. Depending on the equipment and motorisation level, two electronic brake and stabilization systems are available for the ŠkodaSuperb II: - M-ABS - ESP The M-ABS system belongs to the basic equipment of the ŠkodaSuperb II. The ESP system is supplied as a special equipment.Vehicles with four-wheel drive are always equipped with the ESP system.SP65_10Brake booster The brake system is fitted with a brake booster with "dual rate" function which was taken over from the ŠkodaOctavia II. The 10“ brake booster was developed by the company Conti-Teves. The right-hand drive vehicles receive a tandem brake booster of the size 7/8˝.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP65_62GB35ChassisHydraulic control units for the brake and stabilization systemsThe hydraulic control unit consists of: - a hydraulic control unit with hydraulic pump and an electric motor for the hydraulic pump - a control unitHydraulic control unit MK70 The ŠkodaSuperb II is fitted in series with the MABS brake system, of which the main component is the hydraulic control unit MK70 (developed by the company Conti-Teves). Function of the hydraulic control unit MK70: - Antilock braking system (ABS) - Electronic braking force distribution (EBV) - mechanical brake assistant (MBA) - Engine towing torque control (MSR) - Drive slip control (ASR) - Tire pressure inspection (RKA) The functions of the drive slip control (ASR) and the engine towing torque control (MSR) are carried out by the engine control unit, i.e without active brake intervention.Hydraulic unit with hydraulic pumpHydraulic unit with hydraulic pump V39SP65_56Control unit J104Hydraulic control unit MK60 The ŠkodaSuperb II is fitted with the brake and stabilization program ESP as a special equip ment. Its operation is carried out by the hydraulic control unit MK60 with the integrated brake pressure sender G201 (developed by the company Conti-Teves). The hydraulic control unit MK60 in reference to the MK70 has additionally the following functions:Hydraulic unit with hydraulic pumpHydraulic unit with hydraulic pump V39- electronic stabilisation system (ESP) Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability - hydraulic brake assistant (HBA) with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� - electronic differential lock (EDL) - Uphill-start off-assist (HHC) SP65_57 - System DSR (Driver Steering Recommendation) - Trailer stability assist (TSA) Control unit J104 - System for drying the brake discs (RBS)36GBHydraulic control unit MK60 PYA The hydraulic control unit MK60 PYA carries out the operation of the brake and stabilization pro gram ESP for the vehicle version with four-wheel drive. The hydraulic control unit MK60 PYA can carry out the same functions as the MK60, but in addition it has the following function: - Hydraulic assistance of the brake booster (BPS)Hydraulic unit with hydraulic pump Electric motor of the hydraulic pump V39SP65_13Control unit J104Hydraulic assistance of the brake booster (BPS) The BPS function is an electronically triggered hydraulic assistance of the brake booster which also ensures the increase of the brake pressure in situations of crisis, for example during frequent and hard braking for a long period. This means that when the brake booster becomes "ineffective", a greater increase (point A) is therefore no longer possible, yet the brake pressure is still increased by the hydraulic unit.without BPS Brake pressure A Brake pressurewith BPSProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�force applied on the brake pedalforce applied on the brake pedalSP65_29Only left hand drive cars are fitted with the BPS system.GB37ChassisBrake assignmentEngine Front brake15˝ FN3 Ø 288 x 25 mmRear brake15˝ CII 41 Ø 260 x 12 mm1.9 ltr./77 kW - TDI PDSP65_58SP65_5916˝ FN3 Ø 312 x 25 mm15˝ CII 41 Ø 260 x 12 mm1.4 ltr./92 kW - TFSI 1.9 ltr./77 kW - TDI PD*Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP65_72SP65_5916˝ FN3 Ø 312 x 25 mm16˝ CII 41 Ø 286 x 12 mm1.8 ltr./118 kW - TFSI 2.0 ltr./103 kW - TDI PD 2.0 ltr./125 kW - TDI CRSP65_72SP65_7517˝ FNR-G Ø 345 x 30 mm17˝ CII 41 Ø 310 x 22 mm3.6 ltr./191 kW - FSISP65_73 *) This brake combination is only possible for the version ŠkodaSuperb II GreenLine.SP65_7438GBWheels and tiresfor the ŠkodaSuperb II in the series as well as a special equipment. You can select further versions of light alloy wheels from the range of Škoda Original Accessories. Depending on the version of the chassis fitted, light alloy wheels are available with the diameters 16˝, 17˝ and 18˝.Overview of light alloy wheels and tyres – series and special equipmentLEAF GULL STYLER SPARING7.0 J x 16˝ HZ 45 tyre 205/55 R16 XENOX7.0 J x 17˝ HZ 49 tyre 225/55 R17 DION7,5 J x 17˝ HZ 49 tyre 225/55 R177,5 J x 17˝ HZ 49 tyre 225/55 R177,5 J x 18˝ HZ 46 tyre 225/40 R187,5 J x 18˝ HZ 46 Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted tyre 225/40 R18unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Overview of light alloy wheels and tyres – Škodaoriginal accessoriesLAUREL LUXONWinter tyreFLASH7,5 J x 17˝ HZ 49 tyre 225/45 R177,5 J x 18˝ HZ 46 tyre 225/40 R186,0 J x 17˝ HZ 45 tyre 205/50 R17SP65_35GB39ChassisAssistance systemsSystem for drying the brake discs (RBS) During rainy weather a thin water film may coat the brake disc. This causes a delay in the braking effect as first of all the brake pad slips on the thin water film. Only after the brake disc is dry through heat, a complete braking effect can be reached. Each second counts when braking in critical situations. Therefore an assistance system for drying the brake discs was developed to avoid this delay during a braking maneuver in rainy weather. This system for drying the brake discs ensures that the brake discs for the front wheels are dry and clean. This is achieved by short-term braking which is completely unnoticeable for the driver (the brake disc is only slightly touched by the brake pad). This ensures the maximum braking effect and the brake path is shortened.Requirements for the activation of the RBS sysThe vehicles can only be fitted tem: with the RPS system if they are - Vehicle speed max. 70 km/h equipped with the ESP system. - switched on window wipers (continuous/interval setting) Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted If these requirements are given, the brake pads for the front wheels are pressed for a certain length of time on the brake discs. Thus the brake pressure reaches a maximum of 0.02 MPa. As already mentioned, this slight intervention in the brake system is not noticed by the driver.unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Brake pressure 3 seconds 3 kmSP65_76 0.02 MPa3 secondsStartEndTime/distance40GBFunction The ABS/ESP control unit receives the information that the vehicle speed is higher than 70 km/h via the CAN bus dataline as well as the information concerning the operation of the window wiper motor. This way the control unit detects when driving in wetness and that a delay of the brake effect is expected (water film on the brake discs). This triggers the braking cycle of the RBS system. The filling valves of the brake cylinders for the front wheels are adjusted; the delivery pump begins to operate and then generates a pressure of approx. 0.02 MPa in the brake system for the duration of 3 seconds. During this process the pressure is continuously checked in the brake system. If an increase of the brake pressure occurs in the system above the specified value (0.02 MPa), the brake pressure is immediately reduced so that no noticeable brake effect arises.ABS/ESP control unit Signal for switching on the window wipersSignal for vehicle speedPressure produced in the brake cylinSP65_77 ders of the front wheelsProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Brake discThin water filmIf an active intervention in the brake system is incurred by the driver (by operating the brake pedal), thus the braking cycle of the RPS system is immediately interrupted.SP65_78Short-term pressing of the brake pad on the brake disc.Brake padGB41ChassisTrailer stability system (TSA)A vehicle towing a trailer by comparison can get into critical situations, during which even an experienced driver cannot always keep control of it. In order to prevent these critical situations, the ŠkodaSuperb II can be equipped with a trailer stabilisation assist system (TSA). When driving in critical situations, for example during strong side wind, wheel ruts, abrupt change of the driving direction, if the driving speed is too high or on a steeply sloping roadway, the trailer can sway while creating this same effect on the towing vehicle. Depending on the swaying force and the weight of the trailer, the towing vehicle alternatively turns around the axle and at the same time a lateral acceleration occurs. This interaction between the towing vehicle and the trailer can result in the complete vehicle towing combination breaking away. Furthermore if the trailer is not braked, there exists the real danger that the complete vehicle combination pulls apart.The system for stabilising a vehicle combination is a software upgrade of the brake and the stabilisation system ESP which prevents the dangerous swaying of the trailer. The first intervention phase of this upgraded ESP system is the braking of the front wheels of the towing vehicle. If this intervention does not assist and the swaying of the trailer becomes stronger, the system begins the braking of all the wheels of the towing vehicle; if a braked towing trailer is coupled behind the vehicle, this occurs via the overrun brake Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted as well as the unless trailer wheels. authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP65_3042GBSP65_33As already mentioned, the system for stabilising a vehicle combination is a simple software upgrade of the brake and stabilization program ESP and therefore does not need any further measuring device. To activate the upgrade of the ESP system, the following requirements must be given: • the ESP system must be active The stabilisation of the vehicle • the ESP control unit must measure the distance combination is only active if the of the trailer via the trailer socket and determine vehicle is fitted with an original if the trailer is connected to the towing vehicle; Škoda Auto Protected by copyright. Copying for private or commercial purposes, in part or in whole, is nottowing permitted device. authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability this information is unless transmitted by means of the with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� CAN bus data bus line. In order to suppress the swaying that occurs and the lateral acceleration, the individual wheels of the front axle are braked. Thus the formation of turns of the vehicle around the vertical axle and the effects of inadvertent forces onto the axles of the towing vehicle or the trailer are reduced. If this intervention does not help and the trailer still sways, the increase of the brake pressure rises and all four wheels of the towing vehicle are braked until the problem is eliminated. During the brake intervention, the brake lights of the towing vehicle as well as the trailer light up. The driver is informed about the intervention of the system for stabilising the vehicle combination - i.e the ESP system - in the steering through lighting up of the warning light in the dash panel insert.Function If the trailer sways, this may result in the towing vehicle turning around the vertical axle and as a consequence its lateral acceleration. This is detected by the ESP system senders and passed on to the ESP system control unit. The information received (wheel movement speed, turning of the vehicle around the vertical axle, lateral acceleration, steering angle, activation of the brakes) is compared with a performance map predefined in the ESP control unit. In case the predefined values are exceeded, the system for stabilising the vehicle combination is activated.GB43List of Self-Study Programmes so far Title No. Title No. 1 Mono-Motronic 51 2.0 ltr./85 kW Petrol Engine with balance shaft 2 Direct manual gearbox transmission and 2-stage switching intake manifold 3 Anti-Theft Alarm 52 ŠkodaFabia; 4 Working with current flow diagrams 1.4-ltr. TDI engine with unit injection system 5 ŠKODA FELICA 53 ŠkodaOctavia; Presentation of the vehicle 6 ŠKODA-Vehicle safety 54 ŠkodaOctavia; Electrical Components 7 Principles of ABS not published 55 FSI Petrol engines; 2.0 ltr./110 kW and 1.6 ltr./85 kW 8 ABS-FELICIA 56 Direct manual gearbox 9 Immobilizer with transponder 57 Diesel engine 10 Air conditioning in vehicles 2.0 ltr./103 kW TDI Unit injector, 11 Air conditioning FELICIA 2.0 ltr./100 kW TDI Unit injector, 12 1.6-ltr. engine with MPI 58 ŠkodaOctavia; Chassis and electromechanical 13 1.9-ltr. Naturally aspirated diesel engine power-assisted steering 14 Power-assisted steering 59 ŠkodaOctavia RS, Petrol Engine 2.0-ltr./147 kW FSI 15 ŠKODA OCTAVIA turbo 16 1.9-ltr. TDI engine 60 2.0-ltr./103 kW 2V TDI diesel engine; diesel particle 17 OCTAVIA Convenience electronic system filter system with additive 18 OCTAVIA Manual gearbox 02K/02J 61 Satellite navigation systems in Škoda vehicles 19 1.6-ltr./1.8-ltr. Petrol engines 62 ŠkodaRoomster; Presentation of the vehicle part I 20 Automatic gearbox - fundamentals 63 ŠkodaRoomster; Presentation of the vehicle part II 21 Automatic gearbox 01M 64 ŠkodaFabia II; Presentation of the vehicle 22 1.9-ltr. 50 kW SDI/1.9-ltr. 81 kW TDII 65 ŠkodaSuperb II; Presentation of the vehicle part I 23 1.8-ltr. 110 kW turbo petrol engine 1.8-ltr. 92 kW petrol engine 24 OCTAVIA, CAN databus 25 OCTAVIA - CLIMATRONIC 26 OCTAVIA - Vehicle safety 27 OCTAVIA - 1.4-ltr. Engine and Gearbox 002 28 OCTAVIA - ESP 29 OCTAVIA - 4x4 30 Petrol engine 2.0-ltr. 85 kW/88 kW 31 OCTAVIA - Radio/navigation system 32 ŠKODA FABIA 33 ŠKODA FABIA - Vehicle electrics 34 ŠKODA FABIA - Power-assisted steering 35 Petrol engines 1.4-ltr. - 16V 55/74 kW 36 ŠKODA FABIA - 1.9-ltr. TDI Unit injection 37 5-Speed manual gearbox 02T and 002 38 ŠkodaOctavia - Model 2001 39 Euro-On-Board-Diagnosis 40 Automatic gearbox 01 41 6-Speed manual gearbox 02M 42 ŠkodaFabia - ESP 43 Exhaust emission 44 Extended maintenance interval Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability 45 1.2-ltr. 3-cylinder petrol enginesunless with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� 46 ŠkodaSuperb; Presentation of the vehicle part I 47 ŠkodaSuperb; Presentation of the vehicle part II 48 ŠkodaSuperb; 2.8-ltr./142 kW V6 petrol engine 49 ŠkodaSuperb; 2.5-ltr./114 kW TDI V6 Diesel engine 50 ŠkodaAutomatic gearbox 01VOnly intended for internal use in the Škoda-Organisation. All rights reserved. Subject to technical modification. GB Technical status 04/08 S00.2002.65.20 CZ © ŠKODAAuto a. s. http://portal.skoda-auto.comThis paper was made out of chlorine-free bleached cellulose65