TECHNICAL DOCUMENTATION

SSP 326 Audi A6 ‘05 – Electrics

PDFEN92 pages4 MB
SSP 326 Audi A6 ‘05 – Electrics - PDF cover

This PDF is currently unavailable.

Read document text
Service TrainingAudi A6 ‘05 – ElectricsSelf-Study Programme 326 The Audi A6 – the most progressive vehicle takes the leadThe new Audi A6 – the most progressive vehicle takes the lead.The new Audi A6 consistently adopts the highly networked electronic architecture, which is already used in the Audi A8. Overall, new technologies allow the A6 to match up with its "model" vehicle, the Audi A8. Features, which were previously reserved for luxury vehicles, are now also available in the topclass segment.In combination with these diverse capabilities, the underlying technology has, of course, been enhanced considerably. The use of the most modern network technologies, such as CAN, LIN, MOST and Bluetooth, and the related distributed vehicle functions signals the arrival of a new generation of vehicle electrics in this class. Some of these are safety-related features, such as the combined rain/light sensor or the pivoting cornering headlight. Comfort features of the top class, such as the MMI operating system or sophisticated functionalities for the mobile baseplate, which is available ex-works, are part and parcel of these new saloons.The new Audi A6 has everything that is needed to become the Number One model in the top-class range. It combines many different, attractive components to form one unit. Design and performance go hand-in-hand. The new Audi A6 will take over as the most progressive vehicle.Number One: With Design & Performance ContentsOverviewControl unit installation positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Bus topology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installation positions of fuses and relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Convenience electricsControl unit for power management J644 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Access and start authorisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Immobiliser and component protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 External lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Control unit in dash panel insert J285 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Control unit for on-board power supply J519 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Control unit 2 for on-board power supply J520 . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Central control unit for convenience system J393 . . . . . . . . . . . . . . . . . . . . . . . . 55 Door control units J386 - J389 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Control units for seat adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65InfotainmentMultimedia interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Antenna systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Control unit for front information J523 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Sound systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Available telephone systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86The Self-Study Programme provides information on the fundamentals of design and function of new vehicle models, new vehicle components or new technologies. The Self-Study Programme is not a Workshop Manual! Specified values serve only to make the information easier to understand and relate to the software version that was valid at the time the Self-Study Programme (SSP) was created. For maintenance and repair work, please make sure to use the current technical documentation.ReferenceNote OverviewControl unit installation positions1 2 3 4 5 6 7 8 9 10 11 12Auxiliary heating control unit J364 Control unit for ABS with EDL J104 Control unit for distance control J428 Transmitter unit in wheel well for tyre pressure monitoring, front left G431 Control unit for on-board power supply J519 Door control unit, driver's side J386 Control unit for access and start authorisation J518 Control unit in dash panel insert J285 Control unit for steering column electronics J527 Control unit for telephone, telematics J526 Telephone transmitter and receiver R36 Engine control unit J623 Climatronic control unit J25513 Control unit for seat adjustment with steeringcolumn adjustment memory J136 14 Level control unit J197 Control unit for headlight range control J431 Control unit for tyre pressure monitoring J502 Control unit 2 for onboard power supply J520 Control unit for display and operating unit for front information J523 Data bus diagnosis interface J533 Antenna read-in unit for keyless access authorisation J723 15 CD changer R41 CD ROM drive R92 16 Door control unit, rear left J388 17 Airbag control unit J2344 326_14618 Rotation rate sensor 202 19 Door control unit, passenger's side J387 20 Control unit for seat adjustment with memory, passenger’s side, J521 21 Door control unit, rear right J389 22 Transmitter unit in wheel well for tyre pressure monitoring, rear left G433 23 Radio receiver for auxiliary heating R64 24 Control unit for navigation with CD drive J401 Control unit for voice input J507 Digital sound package control unit J525 Radio R TV tuner R78 Digital radio R14725 Transmitter unit in wheel well for tyre pressure monitoring, rear right G434 26 Parking aid control unit J446 Control unit for trailer detection J345 27 Central control unit for convenience system J393 28 Control unit for electric parking and hand brake J540 29 Control unit for power management J6445 OverviewBus topologyDistance control J428Control unit in dash panel insert J285Diagnosis connection T16Data bus diagnosis for data bus J533NOX sensor J583Engine electronics 1 J623Door control unit, driver’s side J386Power management J644Rotation rate sensor G202ABS with EDL J104Door control unit, passenger’s side J387Auxiliary heating J364Seat occupied recognition J706Airbag J234Door control unit, rear left J388Parking aid J446Automatic transmission J217 Power module for left headlight J667 Headlight range control J431Door control unit, rear right J389On-board power supply 2 J520Power module for right headlight J668Seat adjustment with memory Steering column adjustment J136Access and start authorisation J518Electric parking and hand brake J540Seat adjustment with memory, passenger’s side J521On-board power supply J519Level control J197Trailer detection J345Centr. contr. unit for convenience system J393Steering-angle sensor G85Steering column electronics J527Climatronic J255Multi-function steering wheel J453Tyre pressure monitoring J5026 Telephone transmitter and for telephone R36 Telephone/ telematics J526 Handset for telephone R37Display and operating unit for front information J523Navigation with CD drive J401CD changer R41TV tuner R78Digital sound package J525Radio module RVoice input J507MOST bus CAN Instrument clusterSwitch for access and start authorisation E415 Antenna read-in unit for keyless access authorisation J723CAN Diagnosis CAN Drive CAN ConvenienceWiper motor J400Sensor for rain and light detection G397CAN Distance control LIN busPassenger compartment monitoring G273Alarm horn H12Various sub-bus systems Wireless transmission – Bluetooth signalFresh air fan J126Refrigerant pressure and refrigerant temperature G395Transmitter, front left G431Transmitter, front right G432Transmitter, rear left G433Transmitter, rear right G434Antenna, rear R96 326_0277 OverviewInstallation positions of fuses and relays1 E box in radiator tank, left 2 Relay and fuse holder behind dash panel, left 3 Fuse holder in dash panel, left 4 Main fuse carrier in radiator tank, right 5 Fuse holder in dash panel, right 6 Relay and fuse holder in the boot, right8 326_1489 Convenience electricsControl unit for power management J644The basic design of the control unit for power management is the same as the control unit used in the Audi A8 ‘03. It is installed in the boot well, next to the battery. This control unit has been adapted for use in the Audi A6 ’05 in that it now has revised software, which shows the battery condition rather than the battery charge level in the MMI display. Furthermore, the diagnosis tester can be used to read out history data, i.e. data relating to the condition of the on-board power supply in the past.326_094Reference The basic functions of the control unit for power management J644 are described in the SSP 287.Battery conditionThe battery condition indicates how efficient the battery is. The efficiency is determined from the battery charge level and the ability to start. Advantages of the battery condition: – The cut-off stages can be allocated directly to the battery condition. – The messages in the central display of dash panel insert J285 always appear for the same battery condition reading. – A 100 % display indicates that no cut-off stage will be set the next time the engine is switched off. User Car On-board manualBattery conditionSystemsMaintenance326_07210 History dataThe diagnosis tester can be used to read out data from the control unit for power management, which makes it much easier to analyse the on-board power supply and the battery.Guided fault-finding Function/component selection Selecting a function or component Electrical system (Rep. Gr. 01; 90 - 97) 01 – Self-diagnosis systems 61 – Battery control J644 – Control unit for power management, Functions Audi Audi A6 2005 2005 (5) Saloon BBJ 3.0l Motronic / 160 kWSteady battery dischargeThe battery condition is 100 % when the battery is charged. As soon as cut-off level 1 is activated, the MMI "Battery condition" display drops to 90 % and then goes down to 60 % in steps. If cut-off level 1, 2 or 5 is set when the display reads 90 %, the message "Power-saving mode active" appears for a short time on the central display of dash panel insert J285. In addition, the battery symbol in the dash panel insert indicates power-saving mode for the entire load switch-off duration.POWER-SAVING MODE ACTIVEOpen-circuit voltage history If the battery open-circuit voltage is less than the threshold values of 12.5 volts, 12.2 volts and 11.5 volts, an entry is written to the history data. The last four entries can always be read out. Voltage measurement starts when – CAN Convenience is in Sleep mode and – terminal 15 is switched off for at least 2 hours and – the vehicle’s power consumption is 100 mA. Voltage measurement ends when – the voltage increases or – the current increases or – the control unit triggers Sleep mode or – the control unit detects a new battery.A – Battery, Charge level A – Battery, Battery testing J644 – Power management, General description J644 – Control unit for power management, Coding J644 – Read out history data J644 – Power management, Read measured-value blocks J644 – Power management, Query fault memory J644 – Data link tests for generator voltage J644 – Replace control unit J644 – Power management, Activate/deactivate Transport mode326_061326_123Battery condition Cut-off levels 1, 2 or 5Closed-circuit current history POWER-SAVING MODE ACTIVE Cut-off level 3 POWER-SAVING MODE ACTIVE BATTERY LOW If the closed-circuit current exceeds the threshold value of 50 mA, an entry is written to the history data. The last ten entries can be read out. Current measurement starts when – CAN Convenience is in Sleep mode and – terminal 15 is switched off for at least 2 hours and – the vehicle’s power consumption is 50 mA. Current measurement ends when – the current decreases or – the control unit triggers Sleep mode.Battery change history Data for the last three battery changes is stored.Power balance history – driving (= engine on) The power balance and duration of the last five journeys are logged.Cut-off level 6Time/MinutesTime/Minutes326_036Power balance history – idle (= engine off) The power balance and duration of the last five idle times are logged.As soon as cut-off level 3 is activated, the "Battery condition" display drops to 50 % and then goes down to 20 % in steps. Breakdown analysis If the battery condition drops to 10 %, cut-off level 6 is active. In cut-off level 6, the message "BATTERY LOW" appears in the central display of the dash panel insert after the ignition is switched on. If the control unit for power management detects the status "Cannot start vehicle", an entry is written to the history data.Other data is not relevant for Customer Service.Cut-off level history BATTERY LOW Data for the last 15 cut-off levels is stored.326_06112 Convenience electricsAccess and start authorisationFunction diagramLegend E369 E370 E371 E372 E408 E415 F272 F273 F274 F275 F305 Central locking button for outer door handle, driver’s side* Central locking button for outer door handle, passenger’s side* Central locking button for outer door handle, rear left* Central locking button for outer door handle, rear right* Button for access and start authorisation Switch for access and start authorisation Outer door handle switch, driver’s door* Outer door handle switch, passenger’s door* Outer door handle switch, rear left* Outer door handle switch, rear right* Switch for gearbox position P** 1 2 3 4 Terminal 50 (to starter B) CAN Convenience High CAN Convenience Low P/N signal from control unit for automatic transmission J217** Terminal 58s (lighting)* Signal from brake light switch F*5 6G415 Sensor for outer door handle contact, driver’s side* G416 Sensor for outer door handle contact, passenger’s side* G417 Sensor for outer door handle contact, rear left* G418 Sensor for outer door handle contact, rear right* J53 J329 J386 J387 J388 J389 J518 J623 J694 J695 J723 Starter relay Voltage supply relay, terminal 15 Door control unit, driver's side Door control unit, passenger's side Door control unit, rear left Door control unit, rear right Control unit for access and start authorisation Engine control unit Voltage supply relay, terminal 75x Starter relay 2 Antenna read-in unit for keyless access authorisation* Antenna for central locking and anti-theft warning system Antenna on driver’s side for access access and start authorisation* Antenna on passenger’s side for access access and start authorisation* Luggage compartment antenna for access access and start authorisation* Passenger compartment antenna 1 for access and start authorisation*Start requestUlockR47 R134 R135 R137 R138Positive supply Input signal Output signal* only for vehicles with Advanced Key ** only for vehicles with automatic transmissionGround Bi-directional line13 326_03815 Convenience electricsSystem overviewThe Advanced Key system was introduced with the Audi A8 '03 and has been fundamentally revised for the Audi A6 ’05. The most important new feature is that the control unit for access and start authorisation has been combined with the actuator for steering column locking.16 1 Door control unit, driver's side J386 2 Control unit for on-board power supply J519 3 Control unit for access and start authorisation J518 4 Switch for access and start authorisation E415 5 Central locking button for outer door handle, driver's side E369 Outer door handle switch in driver’s door F272 Sensor for outer door handle contact, driver’s side G415 6 Antenna read-in unit for keyless access authorisation J723 7 Antenna on driver’s side for access and start authorisation R134 8 Door control unit, rear left J388 9 Passenger compartment antenna 1 for and start authorisation R138 10 Door control unit, passenger's side J38711 Central locking button for outer door handle, rear left E371 Outer door handle switch, rear left F274 Sensor for outer door handle contact, rear left G417 12 Central locking button for outer door handle, passenger’s side E370 Outer door handle switch in passenger’s door F273 Sensor for outer door handle contact, passenger's side G416 13 Antenna on passenger’s side for access and start authorisation R135 14 Door control unit, rear right J389 15 Antenna for central locking and anti-theft warning system R47 16 Central locking button for outer door handle, rear right E372 Outer door handle switch, rear right F275 Sensor for outer door handle contact, rear right G418 17 Boot antenna for access and start authorisation R137326_14717 Convenience electricsDivision of functionsSystem control is broken down into three basic modules: – the control unit for access and start authorisation J518, – the antenna read-in unit for keyless access authorisation J723 and – the switch for access and start authorisation E415.Access and start authorisation J518Antenna read-in unit for keyless access authorisation J723All three components communicate with each other over a local single-wire bus. The control unit for access and start authorisation is the master of the system and a participant on Convenience. The same control unit is installed for all system versions. The antenna read-in unit for keyless access authorisation is only installed with the Advanced Key option. It serves as the interface between the antennae, sensors and the control unit for access and start authorisation. The switch for access and start authorisation is installed in various versions, depending on the transmission, radio frequency of the central locking system and the Advanced Key option. An evaluation electronic device is also integrated into the switch.Switch for access and start authorisation E415326_06418 Switch for access and start authorisation E415Versions The switch for access and start authorisation is available in the following versions: – with and without Advanced Key function – with and without ignition key anti-removal lock – for radio frequencies of 315 MHz, 433 MHz or 868 MHzFunctions The switch for access and start authorisation includes other functions apart from the ignition switch function:Emergency release326_122– Evaluation of the key position of the ignition switch: The ignition switch evaluates the ignition key position using four switches. The switch information is transferred to the control unit for access and start authorisation in binary code via the local bus and also for monitoring purposes, via two lines. The lock barrel in the ignition switch is not coded mechanically, which means that the turning movement can be performed with every A6 '05 key.326_066– Safety branch for the steering lock of the control unit for access and start authorisation: In addition to the switch-offs in the control unit for access and start authorisation, the voltage supply for the motor of the electromechanical steering lock is interrupted in the switch for access and start authorisation in order to prevent the steering column locking automatically. If terminal 15 is switched on, the voltage supply is always switched off.ULock326_06719 Convenience electrics– Reading in position P of the automatic transmission from the switch for gearbox position P F305: The signal is used to activate the integrated, magnetic ignition key anti-removal lock. If the vehicle battery is flat, the key can be removed by pressing the mechanical emergency release.326_068– Reading in the information from the button for access and start authorisation E408 (only for vehicles with Advanced Key): For safety reasons, the positions of the button for access and start authorisation are evaluated by the switch for access and start authorisation. –326_069– Reading in the information from the antenna for central locking and anti-theft warning system R47: The switch for access and start authorisation passes the data, which the vehicle key sends via remote control, on to the control unit for access and start authorisation. The control unit evaluates the data.– Reading in the signal from the brake light switch F (only for vehicles with Advanced Key): To start the vehicle using the button for access and start authorisation, the brake pedal must be actuated.– Exchanging data with the key using the integrated read coil: If a key is inserted into the switch for access and start authorisation (= S contact on), the electronics system transmits electric power into the key via the read coil. The key then sends the key identification into the switch via the transponder and the read coil. This sends the information to the control unit for access and start authorisation.326_06520 Control unit for access and start authorisation J518The electromechanical steering column lock was integrated into the control unit for access and start authorisation.Functions – Terminal control: The control unit for access and start authorisation puts the information about terminal 15, 75x, 50, S and P on CAN Convenience. The control unit also activates the relays for terminal 15 and 75x and passes the start request signal on to the engine control unit. – Locking the steering column: The motor and gears for locking the steering column are integrated into the control unit for access and start authorisation. The position of the lock is checked using two integrated micro switches. Terminal 15 is only switched on after the steering is unlocked fully.– Immobiliser and component protection: The control unit is the master for these functions.326_09521 Convenience electrics– CAN Communication: The control unit is a participant on CAN Convenience. Data exchange between all the components of the access and start authorisation system is performed via the control unit. It is also the diagnosis interface for the components involved. All data, e.g. code, immobiliser data, etc. is stored in the control unit for access and start authorisation.– Reading in the P/N signal from the control unit for automatic transmission J217: The signal is used to activate the displays relating to engine start in dash panel insert J285.SELECT N OR P START THE ENGINESELECT N OR P TO START THE ENGINE326_062326_06322 Vehicle keyThe key has a mechanically coded hinged bit for the lock cylinder in the driver’s door and the tailgate/ boot lid. The transponder function is integrated into the electronics and also works without a battery. An integrated battery powers the electronics for the radio remote control and Advanced Key functions.326_138A new feature here is the bi-directional data exchange between the radio-control key and the control unit for access and start authorisation via the antenna for central locking and anti-theft warning system R47. This is used to transfer the status of the central locking system into the key. If a button outside of the function range of the key is pressed, the LED integrated in the key shows the lock status of the vehicle. The lock status displayed is always the status, which was achieved using this key when central locking was last actuated. If the vehicle is opened or locked in the interim period using a second key, this does not change the lock status in the first key. Furthermore, the radio frequency is changed from 433 MHz to 868 MHz for the first time in many countries. This radio frequency is ideal for data communication between vehicle keys and the control unit. Since this frequency can only be used for very short transmission pulses, any interference from long-term radio transmitters, such as baby phones, wireless headsets, etc. is eliminated.Signals from the key LED on off Vehicle within key rangeon off Vehicle outside of key range, last vehicle status is lockedon off Vehicle outside of key range, last vehicle status is not locked Approx. 4 seconds326_05823 Convenience electricsAntenna read-in unit for keyless access authorisation J723The control unit is only installed together with the Advanced Key option. It is located at the right of the dash panel, behind the glove compartment. It evaluates the signals from the outer door handle sensors and then activates the antennae for access and start authorisation.326_096Sensors for outer door handle contact G415 - G418The capacity-based operating sensors in the outer door handle detect any contact on the handle and send a signal shortly afterwards to the antenna read-in unit for keyless access authorisation. The antenna read-in unit evaluates the signal and then sends a query to the vehicle key via the antennae for access and start authorisation. The sensors switch off after approx. 80 hours once the vehicle is locked or after 20 actuations without an authorised key.326_09724 Antennae for access and start authorisation E134 - R138Four transmitting antennae are distributed in the vehicle and are used by the vehicle for radio communication with the vehicle key. The antennae transmit on a frequency of 24.5 kHz. The vehicle key evaluates all four signals and determines the position in or on the vehicle based on the field strength of the individual antennae. The antennae are located: – in the rear doors – in the centre console – in the rear bumper326_098Button for access and start authorisation E408The start/stop button works in the same way as the button module, which was first used in the A8 ‘03. For safety reasons, the button positions are evaluated both by the control unit for access and start authorisation and by the switch for access and start authorisation signal.326_08625 Convenience electricsOpening the vehicleAntenna for central locking and anti-theft warning system R47Antenna on passenger’s side for access start authorisation R135Passenger compartment antenna 1 for start authorisation R138Antenna on driver’s side for access start authorisation R134Boot antenna for access start authorisation R137Switch for access and start authorisation E415Control unit for access and start authorisation J518Antenna read-in unit for keyless access authorisation J723Door control unit, driver’s side J386 Sensor for outer door handle contact, driver’s side G415Central control unit for convenience system J393326_05526 1 The driver puts his/her hand into the finger well of the door handle. The sensor for outer door handle contact G415 sends the information "Finger in finger well" to the antenna read-in unit for keyless access authorisation J723.6 The control unit for access and start authorisation sends the information "Opening vehicle" on to the central control unit for the convenience system J393 and to the door control unit, whose door handle initiated the key query.2 The antenna read-in unit sends an alarm signal to the vehicle key via the antenna for access and start authorisation R134.7 The door control unit, which received the instruction from the control unit for access and start authorisation, activates the lock unit, which unlocks the door.3 The antenna read-in unit sends a signal to the vehicle key via all the antennae for access and start authorisation.8 The central control unit for the convenience system J393 sends the information "Opening vehicle – Advanced Key" to CAN Convenience.4 Based on the signals, the vehicle key determines the position on the vehicle and sends information to the antenna for central locking and anti-theft warning system R47.5 The antenna for central locking and anti-theft warning system receives the information. The information is forwarded by the switch for access and start authorisation E415 to the control unit for access and start authorisation J518, where it is evaluated.9 The normal unlocking process takes place. This involves disarming, unlocking, acknowledgement flashing and switching on of the interior light. In addition to acknowledgement flashing, the control unit for access and start authorisation also sends the lock status to the vehicle key via the switch for access and start authorisation and the antenna for central locking and anti-theft warning system R47.27 Convenience electricsStarting the vehicle using the buttonAntenna for central locking and anti-theft warning system R47Antenna on passenger’s side for access start authorisation R135Passenger compartment antenna 1 for access and start authorisation R138Antenna on driver’s side for access start authorisation R134Boot antenna for access start authorisation R137Button for access and start authorisation J408Switch for access and start authorisation E415Control unit for access and start authorisation J518Antenna read-in unit for keyless access authorisation J723Data bus diagnosis for data bus J533Engine control unit J623326_05628 1 The driver presses the button for access and start authorisation E408 down fully. The button sends the information about "Ignition on" and "Engine start" both to the switch for access and start authorisation E415 and to the control unit for access and start authorisation J518.6 Based on the key evaluation, the S contact is sent to CAN Convenience and the steering is unlocked.7 As soon as the steering is fully unlocked, terminal 15 is switched on.2 The switch for access and start authorisation passes the information from the button on to the control unit for access and start authorisation via the data lead. The two button information messages are compared there.8 Once terminal 15 has been switched on, data is exchanged between the engine control unit and the control unit for access and start authorisation via the CAN bus. The immobiliser is then deactivated.3 The control unit J518 sends a key query to the antenna read-in unit for keyless access authorisation J723. The antenna read-in unit sends a signal to the vehicle key via all the antennae for access and start authorisation.9 The control unit for access and start authorisation sends the "Start request" signal to the engine control unit. The engine control unit checks whether the clutch is depressed or whether P or N is selected in the case of an automatic gearbox and then performs the fully automatic engine start.4 Based on the signals, the vehicle key determines the position in the vehicle and sends its information to the antenna for central locking and anti-theft warning system R47.5 The antenna for central locking and anti-theft warning system receives the information. The switch for access and start authorisation E415 passes the information on to the control unit for access and start authorisation, which then evaluates it.29 Convenience electricsImmobiliser and component protectionImmobiliser 4E415J518J533J623326_099The immobiliser 4 technology is used in the Audi A6 ’05. This means that all components must be "taught" online, as is already the case with the Audi A8 ´03 and the Audi A3 ´04.Control unit, which is not integrated into the immobiliser Control unit, which is integrated into the immobiliser Master control unitThe following components are integrated into the immobiliser: – The control unit for access and start authorisation – The engine control unit – The vehicle keysPC/mainframe30 New identityAs is already the case with the Audi A8 ‘03 , if a control unit is stolen, it is no longer necessary (for safety reasons) to also replace the remaining control units, which are integrated in the immobiliser. In this case, the "New Identity" function must be used for the control unit for access and start authorisation and the engine control unit. It is only a matter of installing a new lock set before using the "New Identity" function.Guided fault-finding Function test Teaching driving authorisation systems Testing query The following options are available: 1. Adapt the driving authorisation system to suit the existing immobiliser 2. Assign a new identity to the immobiliser and re-teach the components 3. Terminate the function test Audi Audi A6 2005 2005 (5) Saloon BBJ 3.0l Motronic / 160 kW326_075Switch for access and start authorisation E415The switch for access and start authorisation E415 reads in the key code in electronic form only. The hinged bit coding is not evaluated signal. The ignition switch is not part of the lock set for this reason.326_122Component protectionAs is already the case with the Audi A8 ’03, the Convenience and Infotainment control units are also integrated within the "Component protection" safety system. As a result, these control units must be adapted to the specific vehicle once they have been installed. The data bus diagnosis interface is integrated into the "Component protection" function for the first time. Since component protection works via a number of control units, the Startup menu in "Guided fault-finding" is not assigned to any one control unit and can be found directly under the self-diagnosis systems.Guided fault-finding Function/component selection Selecting a function or component Body (Rep. Gr. 01; 50 - 97) Electrical system (Rep. Gr. 01; 27, 90 - 97) Component protection functions 13 – Distance control, Component protection 05 – Access and start authorisation, Component protection 15 – Airbag, Component protection 06 – Seat adjust. with memory, front pass. side, Comp. protection 36 – Seat adjust. with memory, front driver’s side, Comp. protect. 46 – Central module for convenience system, Comp. protection 66 – Seat adjustment with memory, rear, Component protection 07 – Display/operator unit, front, Component protection 17 – Dash panel insert, Component protection 27 – Display/operating unit, rear, Component protection Audi Audi A6 2005 2005 (5) Saloon BBJ 3.0l Motronic / 160 kW326_07431 Convenience electricsExternal lightsFront headlightsThree different front headlights are used in the Audi A6 ’05: – Halogen headlights – Bi-xenon headlights – Adaptive lightHalogen headlightsHalogen headlights come as standard. The following lamps are fitted in the halogen on the vehicle equipment: – W5W lamp for parking light – H1 lamp for high beam headlight and headlight flasher – H7 lamp for dipped beam headlight and dimmed as a daytime driving light – An orange PY21W bulb as the direction indicator light326_087The daytime driving light in the halogen headlight is only available for Canada and the Northern countries (Scandinavia). It is active when terminal 15 is switched on and the parking light or dipped beam light is off. The following country-specific variants exist: – The daytime driving light is part of the fog lights for Canada and – 3457NA flasher lamps are used for USA and Canada.12345A manual headlight range control system – with potentiometer – is installed for halogen headlights.1 2 3 4 5W5W lamp H1 lamp H7 lamp PY21W lamp D2S lamp326_14932 Bi-xenon headlightsBi-xenon headlights are installed with the "XenonPlus" option. The following lamps are fitted in the bi-xenon headlight: – A blue W5W lamp for the parking light. The colour of the parking light thus corresponds to the xenon light. – A D2S lamp for high beam headlight, headlight flasher and dipped beam headlight. The covers for dipped beam are also activated for high beam and headlight flasher operation. – A P21W lamp for the daytime driving light. This comes on dimmed to 90 %. – A PY21W bulb coated with a reflecting layer of silver is used as the direction indicator light. Only longlife lamps are used. A super-longlife lamp is used as the daytime driving light.326_088The following country-specific variants exist: – No daytime driving lamp is fitted for Japan. – 3457NA flasher lamps are used for USA and Canada.The headlights are changed over to left-hand drive via a lever on the projection module.A dynamic headlight range control system is installed for bi-xenon headlights. The dynamic headlight range control system uses the well-known level sensors. This send the information about the vehicle level to the control unit for headlight range control J431 via a pulse width-modulated signal. The same level sensor is fitted on both the front and rear axle.Headlights are also available with dynamic corner-sensitive lights.326_12433 Convenience electricsAdaptive lightThe adaptive light works as a dynamic cornersensitive headlight. With the dynamic cornering headlight, the headlight projection module is pivoted horizontally by an integrated motor. The headlight lenses and the bracket do not turn. The pivot angle is approx. 15° on the inner curve side and 7.5° on the outer curve side.Pivot range326_076The various pivot angles have advantages in that they provide better lighting for corner routes. In this case, the inner-curve module pivots in twice as much as the outer-curve module. This achieves the maximum possible illumination width with homogeneous light distribution.326_077No pivoting when vehicle is stationary The projection modules are not pivoted at driving speeds of 6 km/h. The pivot angle essentially depends on the steering wheel angle at speeds of more than 10 km/h. This complies with the legal requirement that the headlights must not be pivoted when the vehicle is stationary. At the same time, a slight transition to headlight pivoting occurs during acceleration from idle when the steering lock remains constant.34 Internal structure The pivot angle is monitored by an inductive pickup in the pivot module. The pickup value is evaluated immediately in the relevant power module for headlights as a pulse width-modulated signal. If the motor or pickup does not function, the power module sends an error message to the control unit for headlight range control J431. This is communicated to the driver in a display in dash panel insert J285. The same lamps that are used in the bi-xenon headlight are also used in the adaptive light headlight.326_135 Control motor for dynamic cornering light V318/V319 Sensor for pivot module position G474/G475 Gas discharge light L13/L14Magnet for headlight cover adjustment N395/N396CAN Communication The values marked with (*) are used as input variables in calculating the pivot angle. All other input variables are only needed for dynamic headlight range control.Control unit for headlight range control J431Steering-angle sensor G85 Steering wheel angle* Steering wheel angle speed*Control unit for on-board power supply J519 Dipped beam on*Control unit for ABS with EDL J104 Wheel speeds* Directions of travel* Brake light switch signal Yawing speed* Brake pressure Control unit for access and start authorisation J518 Data bus diagnosis interface J533 Terminal X Terminal 50 326_07935 Convenience electricsSignal and data exchange The same sensors that are used for dynamic headlight range control for bi-xenon headlights are also used as level sensors. They send a pulse width-modulated signal to the control unit for headlight range control. Data is exchanged between the control unit for headlight range control J431 and the power modules in the headlight on the left J667 and right J668 via a 500-kBaud CAN.326_085Show Room function The Show Room function can be used to pivot the headlights by moving the steering wheel – even when the vehicle is stationary – for presentation. The function can be adapted using the diagnosis tester in the control unit for headlight beam adjustment. If the vehicle is then driven at more than 30 km/h, the function is permanently disabled. The function can be switched on again at any time using the diagnosis tester.Guided fault-finding Function/component selection Selecting a function or component Body (Rep. Gr. 01; 50 - 97) Electrical system (Rep. Gr. 01; 27, 90 - 97) 01 – Self-diagnosis systems 55 – Dynamic headlight range control J431 – Dynamic headlight range control, Functions J431 – Contr. unit, head. range control (HRC), General system descr. J431 – Control unit for headlight range control (HRC), Adaptation J431 – Contr. unit, head. range control (HRC), Adapt. – Show Room J431 – Control unit for headlight range control (HRC), Coding J431 – Control unit for headlight range control (HRC), Replacing J431 – Control unit for headlight range control (HRC), Basic setting J431 – Contr. unit, head. range contr. (HRC), Read. meas.-val. blocks J431 - Contr. unit, head. range control (HRC), selective actuator test J431 – Contr. unit, head. range contr. (HRC), sequential actuator test Audi Audi A6 2005 2005 (5) Saloon BBJ 3.0l Motronic / 160 kW326_07436 Back lightsDifferent tail lights are used in the Audi A6 ’05, depending on the equipment variant. This is differentiated into the following: – Basic variant ECE – High variant ECE – High variant SAEBasic variant ECEThe tail light in the basic variant only uses lamps with a 15-mm bayonet socket for the lights. There are three sections for tail light activation. To ensure that the different-sized sections look from the outside to be equally illuminated, the central control unit for the convenience system J393 activates each lamp with a different dimming ratio. The two inner lamps in each back light are also used as the brake light. The outer lamp functions as the "rear fog light". If the rear fog light is on, only the inner lamp is active as the brake light.Tail light and rear fog light Tail light and brake light (if rear fog light is off)Tail light and brake lightDirection indicator lightReversing light326_14137 Convenience electricsHigh variant ECEThese back lights are installed if bi-xenon headlights at least are fitted as the front headlights. The external feature of the High back lights is the use of LEDs for the brake light. The LEDs, which are fixed in the reflector housing, are activated by two contacts from the lamp bracket. The rear fog light is located at the bottom of the back light. Here, the lamp on the driver’s side is used as the rear fog light, while the lamp on the passenger’s side serves as the reversing light. This means that the same lamp bracket can be used for both the High back light and the Basic back light.Brake lightBrake lightTail lightsTail lights Direction indicator light Reversing lightDirection indicator light Rear fog light326_15238 High variant SAEThe back lights for the North American market have standard LED units. The LED units are used for the indicator and brake light function. The three sections underneath are for the tail light lamps. The SAE back lights have two rear fog lights and two reversing lights.Brake light and direction indicator light Tail lightsRear fog lightReversing light 326_142LED unit diagnosisThe failure of an LED is detected by the electronics in the lamp housing. All LEDs are then switched off so that the central control unit for the convenience system J393 can set the relevant fault memory entry.39 Convenience electricsControl unit in dash panel insert J285326_145The control unit in dash panel insert J285 is available in two variants. The High-Line variant with colour display only comes in vehicles with adaptive cruise control. As in the A8 '03, the anti-drive-off feature and gateway are no longer integrated into the dash panel insert. The handy position of the rotary light switch has meant that the indicator lights for dipped beam headlight, fog light and rear fog light could also be fitted directly in the rotary light switch. Likewise, the buttons for instrument lighting, the auto-check system and the daily mileage counter are now positioned to the right, next to the dash panel insert, in the button module (operating buttons for dash panel insert E493).Lamp failureIf an exterior lighting lamp fails, a symbol appears in the central display indicating which lamp has failed. If you now press the Check button, the failed lamp is also described by a text message in the central display.Outside temperature indicatorThe instrument cluster evaluates both the temperature sensor for outside temperature G17 and the outside temperature signal from the Climatronic control unit J255. The lower of the two values is displayed.40 Function diagram326_037Legend E493 Operating button for dash panel insert F1 F34 E66 F77 G G6 G17 G34 G35 G169 G266 J17 J285 J489 J533 J540 Oil pressure switch Warning contact for brake fluid level Switch for low coolant display Warning contact for windscreen washer level Sender for fuel level indicator Pre-feed fuel pump Temperature sensor for outside temperature Sensor for brake pad wear, front left Sensor for brake pad wear, front right Fuel level sensor 2* Oil level and oil temperature sensor Fuel pump relay Control unit in dash panel insert Receiver for radio clock Data bus diagnosis interface Control unit for electric parking and hand brake Additional signal 1 2 Terminal 58d Terminal 58s* only for vehicles with quattro drive41 Convenience electricsControl unit for on-board power supply J519Functions The main function of the control unit for on-board power supply is to read in switch information and activate power outputs. It is familiar from the Audi A8 ‘03 and has been adapted to new functionalities in the Audi A6 ´05.326_107Master functions The following master functions are implemented in the control unit for on-board power supply. – External lighting control – LIN master for the control unit for wiper motor J400 – LIN master for the sensor for rain and light detection G397 (for details of function, see Sensor for rain and light detection)J519Stand-by master function If the central control unit for the convenience system J393 fails, the control unit for on-board power supply J519 takes over the stand-by master function. It sends the information for direction indicators to the CAN bus.G397J400 326_108Reference Further information on this can be found in the SSP 288, Audi A8 ’03 – Distributed Functions.42 Emergency function The software for the control unit for on-board power supply can be used to implement emergency functions. If a fault is detected in the rotary light switch or if there is an open circuit in the line to the rotary light switch, the control unit for on-board power supply switches the driving light on.Other functionalities In addition to the master functions, the following functions are also available in the control unit for on-board power supply. – – – – – – – Steering column adjustment Footwell lighting Selector gate lighting Direction indicator control, front and side Signal horn activation Windscreen washer pump activation Steering column memoryVersionsThere are three functional versions of the control unit for on-board power supply: – Low-Line version (with no electric steering column adjustment, no xenon, no daytime driving lights) – Mid-Line version (with no electric steering column adjustment, with xenon and daytime driving lights) – High-Line version (with electric steering column adjustment, xenon and daytime driving lights)Installation position The control unit for on-board power supply is installed on the left behind the dash panel. It can be accessed by removing the footwell cover.326_13443 Convenience electricsFunction diagramE1 E3 E7 E18Light switch Hazard warning light switch Fog light switch Switch for rear fog lightK4 K6 K13 K17 L9 L13 L14 L22 L23 L174 L175 M1 M3 M5 M7 M18 M19Indicator light for parking light Indicator light for hazard warning lights Indicator light for rear fog light Indicator light for fog lights Lamp for light-switch lighting Gas discharge light, left Gas discharge light, right Lamp for left fog light Lamp for right fog light Lamp for daytime driving light, left Lamp for daytime driving light, right Lamp for parking light, left Lamp for parking light, right Lamp for direction indicator light, front left Lamp for direction indicator light, front right Lamp for side direction indicator light, left Lamp for side direction indicator light, rightF4 Reversing light switch F266 Contact switch for bonnet G357 G358 G397 G474 G475 H2 H7 J4 J400 J431 J519 J667 J66844Sender for vertical steering column adjustm. Sender for axial steering column adjustment Sensor for rain and light detection Sensor for pivot module position, left Sensor for pivot module position, right High-pitch horn Low-pitch horn Relay for dual-pitch horn Control unit for wiper motor Control unit for headlight range control Control unit for on-board power supply Power module for left headlight Power module for right headlight 326_111N395 Magnet for cover adjustment, left headlight N396 Magnet for cover adjustment, right headlight V5 V48 V49 V123 V124 V318 V319 Windscreen washer pump Left control motor for headlight range control Right control motor for headlight range control Motor for vertical steering column adjustment Motor for axial steering column adjustment Control motor for dynamic cornering light, left Control motor for dynamic cornering light, rightAdditional signals 1 2 3 4 5 6 Terminal 58 Terminal 58s CAN Drive High CAN Drive Low CAN Convenience High CAN Convenience LowW9 Footwell light, left W10 Footwell light, right45 Convenience electricsSystem overviewThe control unit for on-board power supply J519 evaluates the following input signals: – Hall sender 1 for vertical adjustment of the steering column – Hall sender 2 for axial adjustment of the steering column – Bonnet switch for anti-theft warning system – Rotary light switch – Hazard warning button – Switch for reversing light (manual transmission) – Sensor for rain and light detection (via LIN bus)The control unit for on-board power supply J519 controls the following loads: – – – – – – – – – Front direction indicator lights, left and right Side direction indicator lights, left and right Front parking light, left and right Dipped beam headlight, left and right High beam headlight, left and right Fog lights, left and right Relay for headlight cleaning system Windscreen washer pump Control unit for wiper motor (via LIN bus) – – – – – – – Supply, terminal 58 Front footwell lights, left and right Relay for dual-pitch horn Steering column adjustment (vertical/axial) Selector lever lighting Indicator light for hazard warning lights Magnets for cover adjustment Headlights (left and right)326_11046 DiagnosisBasic settings After the control unit for on-board power supply J519 or the steering column or the switch for steering column adjustment E167 is replaced, a basic setting in axial and vertical position must be implemented for the steering column.Actuator test An actuator test can be used to carry out the following checks: – – – – – – – – – – – – – – – – – – – – Indicator light for hazard warning lights K6 Lamp for parking light, left M1 Lamp for parking light, right M3 Lamp for dipped beam headlight, left M29 Lamp for dipped beam headlight, right M31 Lamp for high beam headlight, left M30 Lamp for high beam headlight, right M32 Lamp for left fog light L22 Lamp for right fog light L23 Lamp for daytime driving light, left L174 Lamp for daytime driving light, right L175 Direction indicator lights, left Direction indicator lights, right Footwell light, left W9 Footwell light, right W10 Wiper, top turning position Wiper, bottom turning position Windscreen washer pump V5 Relay for dual-pitch horn Terminal 58Coding The control unit for on-board power supply J519 can be coded for the functions – – – – – Daytime driving light, Driving light assistant, Headlight type, Footwell lighting and Country versionsusing the diagnosis tester. Note The actuator test can be performed either sequentially (in sequence) or selectively (individual selection).47 Convenience electricsSensor for rain and light detection G397A combined sensor for rain and light detection is used for the first time in the Audi A6 ’05. The sensor includes a light-control assistant function, which relieves the driver of the job of having to switch the driving light on manually, as well as a wiper control function, which depends on the amount of moisture on the front windscreen. The development goal here was to integrate these functions in a compact housing. The sensor is connected as a LIN slave to the control unit for on-board power supply J519.LIN Terminal 30Terminal 31326_090Installation position The sensor for rain and light detection is located on the windscreen in the attachment base of the interior mirror.Tasks of the light sensor – Switch the driving light on and off automatically – Activate the Coming Home/Leaving Home function – Day/night detection for rain sensor326_153Switch-on conditions The light sensor supplies the control unit for on-board power supply with information for switching on the driving light in the following situations: – – – – Dawn/dusk Darkness Entering/travelling through tunnels Travelling through forestsNote Allowances are made for disruptive influences, such as external light, dirt, vibrations or smears caused by wiper blades.48 Function of the light sensor In order to detect certain ambient conditions, such as tree-lined avenues or routes through tunnels, the light sensor registers the light intensity in two areas. The global field describes the direct brightness on the vehicle, while the fore-field describes the lighting conditions in the section of road lying ahead of the vehicle. This is activated using the "Auto" setting on the rotary light switch.Light sensorRain sensor photodiode is also used326_091Tasks of the rain sensor The following functions are implemented, depending on the amount of water on the windscreen: – Switch the wiper on and off automatically at seven different speeds – Activate the driving light when it is rainingGlobal fieldFore-field326_092Activation The rain sensor is activated by positioning the wiper stalk to the "Intermittent" setting. The driver can then set four sensitivity ranges using the regulator for windscreen wiper intermittent operation. A reference wiper function (wiper action when the rain/light sensor is activated) is no longer necessary with this system. This means that the wiper stalk can always remain at the "Intermittent" setting. For safety reasons, however, the rain sensor operation is only activated in this case when a driving speed of more than 16 km/h is reached, or when the sensitivity on the regulator for windscreen wiper intermittent operation is changed.Note Manually switched wiper intervals have priority49 Convenience electricsFunction of the rain sensor The rain sensor uses the physical light refraction principle to register the amount of moisture on the windscreen. The circular LEDs integrated in the sensor emit infrared light through the windscreen from within the interior of the vehicle.LEDsPhotodiode326_091If the windscreen is dry, the infrared light is reflected on the surface of the glass. The photodiode integrated in the centre of the sensor thus records a high light intensity.326_080If the windscreen is covered with moisture, the optical properties on the surface of the glass change. Light now emerges from the windscreen surface through the light refraction caused by water drops. As a result, less light is reflected back and the photodiode records a lower light intensity (light dispersion principle).Windscreen surfaceLEDPhotodiodeLED326_093Diagnosis The control unit for on-board power supply J519 is used for diagnostic procedures on the sensor for rain and light detection.50 Control unit for wiper motor J400The control unit for wiper motor J400 was redesigned for use in the new Audi A6 ’05. As is already the case in the Audi A8 ‘03 and Audi A3 ’04, the control unit and wiper motor are integrated into one housing. It is linked to the control unit for on-board power supply J519 as a LIN-slave control unit.326_104Functions – – – – – – Intermittent Intermittent stages (four) One-touch wiping Wiper function stage 1 Wiper function stage 2 Wipe over again 5 seconds after the last wash-and-wipe action (at vehicle speed 5 km/h only) – Rain sensor function (see Sensor for rain and light detection G397) – Service setting – Alternating parking position (can be coded)Function diagram G397 Sensor for rain and light detection J400 Control unit for wiper motor J519 Control unit for on-board power supply326_081Note The control unit for on-board power supply J519 now activates the windscreen washer pump V5.Reference For further information on the control unit for wiper motor J400, please refer to the SSP 287, Audi A8 ‘03 – Electrical Components.51 Convenience electricsControl unit 2 for on-board power supply J520An additional on-board power supply control unit is needed in the Audi A6 ´05 because of the huge range of functions it offers.Functions Control unit 2 for on-board power supply J520 includes the following functions: – – – – – Activate the solenoid valve for Servotronic N119 Sliding roof convenience opening/closing Speed signal for sliding roof Tilt sensor for anti-theft warning system Glove compartment release326_103Installation position Control unit 2 for on-board power supply is located behind the glove compartment in the module carrier on the passenger’s side.VersionsTwo different versions of control unit 2 for on-board power supply are available, depending on the vehicle equipment. – Low version (only includes glove compartment release and Servotronic function only) – High version (also with sliding roof/anti-theft warning system)52 Function diagram326_082Legend E316 J520 N119 V1 V327 Glove compartment button Control unit 2 for on-board power supply Solenoid valve for Servotronic Motor for sliding roof Motor for glove compartment releaseAdditional signals 1 2 CAN Convenience High CAN Convenience Low53 Convenience electricsTilt sensor for anti-theft warning systemThe tilt sensor for the anti-theft warning system is integrated directly in control unit 2 for on-board power supply J520 in the new Audi A6 ‘05. The fluid-filled sensor registers changes in the vehicle tilt both transversely and longitudinally, thereby preventing incorrect triggering as a result of shaking through viscous fluid and electronic delay. The current tilt values can be read out using measured-value blocks.Note The tilt sensor function can be switched off using a button in the driver’s door panel.Reference For further information on the tilt sensor function, please refer to the SSP 254, Audi A4 ‘01 – Technology. Diagnosis – Measured-value blocks Measured-value blocks are available for the following functions: – Servotronic – Sliding roof – Tilt angle– Actuator test Checks can be carried out for the following functions, depending on the version: – Glove compartment release – Servotronic valve – Sliding roof activation (can be measured using a multimeter on the on-board power supply control unit, sliding roof does not open, however, if it is not released by the central control unit for the convenience system)– Coding The High-Line version of control unit 2 for on-board power supply J520 must be coded for the following functions: – Tilt sensor (with or without) – Sliding roof (with or without)54 Central control unit for convenience system J393The central control unit for the convenience system J393, with which you may be familiar from the Audi A8 '03, is used in the Audi A6 ’05. The tasks and functions have been adapted according to requirements. The control unit is a participant on the CAN Convenience data bus.Master functions The master functions of the central control unit for the convenience system are as follows: – – – – Direction indicator master Central locking master Interior lighting master LIN master for alarm horn H12 and sensor for passenger compartment monitoring G273326_113Other functionalities In addition to the master functions, other functions are also available in the central control unit for the convenience system. The power outputs integrated in the control unit activate the following loads: – – – – – – Back lights Rear sun blind Rear window heating Rear footwell lights Boot light Tailgate/boot lid releaseVersions Two versions of the central control unit for the convenience system are available: – Basic – High-Line (with rear sun blind/anti-theft warning system/light package for ambient lighting/area lighting)55 Convenience electricsInstallation position The central control unit for the convenience system is installed above the battery in the rear right of the boot.326_114System overviewThe central control unit for the convenience system J393 receives the following input signals: – – – – Tailgate/boot lid "softtouch" Tailgate/boot lid locking cylinder closed Brake light switch Brake light signal from control unit for ABS with EDL J104 – Garage door opener (adaptation flashing) – – – – – Crash input Tailgate/boot lid contact Tank plug lock detection (USA) Alarm horn H12 (via LIN bus) Sensor for passenger compartment monitoring G273 (via LIN bus)The central control unit for the convenience system J393 activates the following loads: – – – – – – – – Rear footwell lights, left and right Boot light Motor for rear sun blind V91 Motor for tank cap locking V155 Motor for tailgate/boot lid central locking V53 Interior lighting roof module Passenger compartment light Alarm horn H12 (via LIN bus) – – – – – – – – High-level brake light (LED) Tail light, left and right Brake light, left and right Reversing light, right Rear fog light, left Number plate light Heated rear window Z1 Rear direction indicator light, left and right– Level control unit J197 (doors open/closed)326_121 56 Interior lighting controlStandard equipment function The standard function includes activating the inside light in the roof lining, the front footwell lights, the glove compartment light and the boot light. The central control unit for the convenience system J393 activates the inside light in the roof lining, the boot light and the glove compartment light directly via its own outputs and inputs. The control unit for on-board power supply J519 activates the front footwell lights via CAN messages from the central control unit for the convenience system J393.Additional equipment function (light package) The light package additional equipment also includes a door contour light in every door as well as footwell lights (front and rear), which are based on LED technology. The door contour lighting is activated by the door control unit, which receives the CAN messages for this from the central control unit for the convenience system J393.57 Convenience electricsFunction diagramC18 E26Interference filter for windscreen antenna Switch for glove compartment lightJ9 Relay for rear window heater J393 Central control unit for convenience system L46 Lamp for rear fog light, left Lamp for tail light, right Lamp for tail light, left Lamp for direction indicator light, rear left Lamp for direction indicator light, rear right Lamp for left brake light Lamp for right brake light Lamp for reversing light, right Lamp for high-level brake light Lamp for tail light 2, left Lamp for tail light 2, right Lamp for tail light 3, left Lamp for tail light 3, rightF124 Contact switch for lock cylinder for tailgate/boot lid, anti-theft warning system, central locking F147 Contact switch for make-up mirror driver’s side F148 Contact switch for make-up mirror passenger’s side F218 Switch for tailgate/boot lid central locking F248 Button for tailgate/boot lid lock cylinder release G273 Sensor for passenger compartment monitoring H12 Alarm hornM2 M4 M6 M8 M9 M10 M17 M25 M49 M50 M54 M5558 326_120V53 Motor for tailgate/boot lid central locking V91 Motor for rear sun blind V155 Motor for tank cap locking W6 W14 W18 W20 W35 W45 W46 X Z1 Glove compartment light Illuminated make-up mirror, passenger’s side Boot light, left Illuminated make-up mirror, driver’s side Boot light, right Footwell light, rear left Footwell light, rear right Number plate lightAdditional signals 1 2 3 4 CAN Convenience High CAN Convenience Low Brake light switch F ESP brake signal from control unit for ABS with EDL J104 Crash signal from airbag control unit J234 "Doors OPEN" signal to level control unit J197 "Adaptation flashing" signal from control unit for garage door opening J530 "Release" signal to motor for sliding roof V15 6 Heated rear window 789 + 10 "Interior light" activation signal to roof module W159 Convenience electricsDiagnosisThe central control unit for convenience system, J393, has the usual diagnostic functions, such as read fault memory, read measured value blocks, adaptation, coding, as well as selective and sequential actuator test at its disposal.Actuator test The selective actuator test initiated by the diagnosis tester can be used to check the following actuators: – Indicator light for safe central locking K133 (in door rim) – Lock central locking signal (once) – Activate safe locking for doors (once) – Unlock central locking signal – Lock filler flap – Unlock filler flap – Lamp for left brake light M9 – Lamp for right brake light M10 – Lamp for high-level brake light M25 – Lamps for tail light, left – Lamp for parking light, left M43 – Lamps for tail light, right – Lamp for parking light, right M44 – Lamp for reversing light, left M16 – Lamp for reversing light, right M17 – Lamp for direction indicator light, rear left M6 – Lamp for direction indicator light, rear right M8 – Lamp for rear fog light, left L46 – Lamp for rear fog light, right L47Note In addition to the selective actuator te