TECHNICAL DOCUMENTATION

SSP 327 Audi engines – Chain drives

PDFEN60 pages3 MB
SSP 327 Audi engines – Chain drives - PDF cover

This PDF is currently unavailable.

Read document text
Service TrainingAUDI engines – Chain drivesSelf-Study Programme 327 A compact engine design has been achieved by positioning the chain drive on the gearbox side and by using a four-piece chain drive distributed on two planes. Thus, it is possible to install multi-cylinder engines in smaller model series without the need for extending the front end of the vehicle. The chain drive helps reduce operating costs, because it is maintenance free and designed for long life.Audi V8 4.2 5V chainAudi V8 4.2 5V chain ZR seriesCompetitors of the V8464 mm 516 mm approx. 656 mm Table of contentsContents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61.6-litre R4 FSI engineDescription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Performance features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Chain drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Intake system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Oil circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163.2-litre V6 FSI engineDescription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Performance features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Chain drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Intake manifold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Oil circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Petrol direct injection with supply on demand fuel system . . . . . . . . . . . . . . . . 263.0-litre V6 TDI engineDescription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Performance features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Chain drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Backlash compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Intake manifold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 4.0-litre V8 TDI engineDescription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Performance features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Chain drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Engine lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Cooling system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Air intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Exhaust system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 454.2-litre V8 engineDescription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Performance features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Chain drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Intake system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516.0-litre W12 engineDescription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Performance features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Chain drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Cooling system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Oil circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Exhaust system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58The Self-Study Programme imparts a basic knowledge of the design and function of new models, new automotive components or new technologies. The Self-Study Programme is not a Repair Manual! The values given are intended as a guideline only and refer to the software version valid at the time of publication of the SSP . For maintenance and repair work, always refer to the current technical literature.ReferenceNote IntroductionOverviewAudi engines with camshaft timing chainIn the Audi engines specified below, the camshaft is timed by a chain drive.3.2-litre V6 FSI engine1.6-litre R4 FSI engine327_0026.0-litre W12 engine327_001_1327_0066 3.0-litre V6 TDI engine4.0-litre V8 TDI engine327_0034.2-litre V8 engine 327_004327_0057 1.6-litre R4 FSI engineDescriptionTechnical features– Camshafts driven by timing chains – Air filter integrated in the engine cover – Oil circuit with closed-loop Duocentric oil pump – Bosch Motronic MED 7.5.11 petrol direct injection system – Dual circuit cooling system – Petrol direct injection with supply on demand fuel system327_001Reference For further information, please refer to SSP 296 - The 1.4-litre and 1.6-litre FSI engines with timing chain.8 Performance featuresTorque and power outputThe engine code and engine number can be found on the left-hand side of the cylinder block under the battery mounting.327_022Torque/power curve180 90Max. torque in Nm Max. power output in kW140 Nm 100 70 kW 50603020 1000 3000 5000 700010Engine speed in RPMSpecificationsEngine code Type of engine Displacement in cm3 Max. power output in kW (bhp) Max. torque in Nm Number of valves per cylinder Bore in mm Stroke in mm Compression ratio Firing order Fuel gradeBAG 4-cylinder inline engine 1598 85 (115) at 6000 RPM 155 at 4000 RPM 4 76.5 86.9 12 : 1 1–3–4–2Super Plus unleaded, at least 98 RON (unleaded Super, 95 RON, as an alternative with slight reduction in performance) Close-coupled primary catalytic converter, NOx storage catalytic converter, Exhaust gas recirculation Fully electronic engine management with drive-bywire throttle control EU IV9Exhaust emission control Engine management Emission category 1.6-litre R4 FSI engineChain driveDriven camshaftsThe overhead camshafts are driven directly by the crankshaft via a timing chain. The camshaft timing chain is guided by a slide rail and tensioned by the tensioning rail.Intake camshaft sprocket Exhaust camshaft sprocketTensioning rail Camshaft timing chainSlide railOil pump drive chainSprocket wheel for driving the camshaft timing chain and oilpump327_059Oil pump sprocket10 Camshaft adjusterThe intake camshaft can be adjusted in dependence on engine speed and load. The camshaft timing is adjusted continuously over a range of 20° camshaft angle in the "advance" direction relative to the basic setting. A vane cell adjuster, which is actuated by the engine oil pressure, is used as the adjustment mechanism. Intake camshaft timing adjustment valve -1- is activated by the engine control unit. It regulates the oil pressure in the camshaft adjuster, and hence the camshaft timing.Intake camshaft timing adjustment valve -1-Intake camshaft adjuster327_060Camshaft adjuster20° The camshaft adjuster housing is rigidly connected to the intake camshaft sprocket, the internal rotor to the intake camshaft. The oil inlet pressure causes the internal rotor to counter-rotate relative to the housing, thus adjusting the camshaft.327_06111 1.6-litre R4 FSI engineIntake systemEngine coverThe following parts are integrated in the engine cover: – the air filter, – the air duct running from the air inlet to the throttle valve control unit, – the air duct for intake noise absorption, – the hot air feed control thermostat and – intake air temperature sender -2- for engine load calculationIntake air temperature sender -2-Air outlet to throttle valve control unitAir filter327_062Air duct for intake noise absorptionHot air feed control thermostatCold intake air inletHot intake air inlet12 Intake manifold upper sectionThe upper section of the intake manifold is made of plastic and accommodates the vacuum reservoir required to operate the intake manifold flaps.Intake manifold flap air flow control valve N316Throttle valve control unit J338Intake manifold pressure sender G71to activated charcoal canisterActivated charcoal filter solenoid valve -1-327_063Fuel distributor (intake manifold lower section)The fuel distributor represents the lower section of intake manifold and is bolted to the cylinder head. In addition to the ports for distributing fuel to the injectors, the fuel distributor accommodates the intake manifold flaps for intake air flow control.327_064Intake manifold flapsReference For a functional description of the intake manifold flaps, please refer to SSP 279 - The 2.0-litre 110 kW engine with petrol direct injection (FSI).13 1.6-litre R4 FSI engineOil circuitControlled Duocentric oil pumpA closed-loop Duocentric oil pump is employed. It maintains a near-constant oil pressure over the entire RPM range. Oil pressure is regulated by the control spring and control ring integrated in the oil pump.HousingExternal rotor Input shaft with internal rotorHousing coverDrive gearControl ringControl spring Oil intake manifold327_065CrankshaftDuocentric oil pump driveThe oil pump is driven by the crankshaft via a separate timing chain. The chain is tensioned by a mechanical chain tensioner.Drive chainReference For a functional description of the Duocentric oil pump, please refer to SSP 296 The 1.4-litre and 1.6-litre FSI engines with camshaft timing chain.Mechanical chain tensioner327_066 Oil pump drive gear14 Cooling systemCoolant circuitThe cooling system has two circuits - one for cooling the cylinder block and one for cooling the cylinder head. One third coolant flows into the cylinder block and two thirds into the cylinder head. Coolant flow is regulated by two thermocouples integrated in the coolant thermostat housing. Whereas the short thermocouple probe for the coolant thermostat regulates coolant flow in the cylinder block, the long thermocouple probe for coolant thermostat regulates coolant flow in the cylinder head. Both thermocouples are closed up to a coolant temperature of approx. 87 °C, thus allowing the engine to reach operating temperature more quickly. The long thermocouple probe for the coolant thermostat is open at coolant temperatures from approx. 87 °C to 105 °C and the coolant temperature in the cylinder head is kept at approx. 87 °C. The temperature in the cylinder block can continue to rise. Both thermocouples are opened when the coolant temperature exceeds 105 °C, whereby the temperature is kept at 87 °C in the cylinder head and 105 °C in the cylinder block.Expansion tankEGR valveLong thermocouple probe for coolant thermostatHeater heat exchangerCoolant pumpCoolant circuit Cylinder blockCoolant circuit Cylinder headEngine oil cooler327_067Cooler Short thermocouple probe for coolant thermostatCoolant thermostat housing15 1.6-litre R4 FSI engineFuel systemSupply on demand fuel systemThe fuel system comprises a low-pressure circuit and a high-pressure circuit. The delivery rate of the electrical fuel pump G6 in the low-pressure circuit is regulated by the fuel pump control unit J538 so that only as much fuel as is necessary is delivered. This reduces the power consumption of the fuel pump and allows the fuel pressure to be increased in critical engine operating conditions involving possible vapour bubble formation. The electrical fuel pump is energised by the onboard power supply control unit when the driver's door is opened, thus resulting in the buildup of fuel pressure. After the engine is started, voltage is fed via the engine electronics control unit.Door contact switchBatteryLow-pressure circuitThe low-pressure circuit consists of – – – – the fuel tank, the fuel pump G6, the fuel filter, the fuel pressure sender, low pressure G410 and – the fuel pump control unit J538.Fuel pump control unit J538Fuel filterElectrical fuel pump G6Fuel tankPressureless Pressure 4 – 5 bar Pressure 50 – 100 bar16 High-pressure circuitThe high-pressure circuit consists of – – – – – – the high-pressure fuel injection pump, the fuel pressure regulating valve, the high-pressure fuel rail, the high-pressure fuel pressure sender G247, the high-pressure fuel lines and the high-pressure injectors.Onboard power supply control unit J519Engine control unit J623High-pressure fuel pressure sender G247Fuel pressure sender, low pressure G410High-pressure fuel injection pump327_068High-pressure fuel railHigh-pressure injectors17 3.2-litre V6 FSI engineDescriptionTechnical features– Timing gear with chain – Timing chain on the transmission side – Continuously variable valve timing – Counter-rotating balancer shaft running at engine speed to compensate for crankshaft vibrations – Twin-path intake manifold made of plastic – Petrol direct injection with supply on demand fuel system – Siemens engine management system – Dual-circuit cooling system – Oil circuit with Duocentric oil pump and cold start valve327_002Reference For further information, please refer to SSP 325, AUDI A6 ‘05 - Ancillaries.18 Performance featuresEngine code, torque and power outputThe engine code and engine number can be found on the front left-hand side of the cylinder block.327_008Torque/power curve440220Max. torque in Nm Max. power output in kWNmkW36014032010028060240 0 2000 4000 6000 800020Engine speed in RPMSpecificationsEngine code Type of engine Displacement in cm3AUK 6-cylinder vee-engine with 90° included angle 3123 188 (255) at 6500 RPM 330 at 3250 RPM 4 84.5 92.8 12.5 : 1 1–4–3–6–2–5 Unleaded Super, 95 RON (unleaded regular-grade, 91 RON, as an alternative with slight reduction in performance) Closed-loop catalytic converter with lambda control, NOx storage catalytic converter Siemens engine management system EU IVMax. power output in kW (bhp) Max. torque in Nm Number of valves per cylinder Bore in mm Stroke in mm Compression ratio Firing order Fuel gradeExhaust emission control Engine management Exhaust emission standard19 3.2-litre V6 FSI engineChain driveDriven camshaft, oil pump and balancer shaftA flywheel-side chain drive was selected for the 3.2-litre V6 engine, as it is subject to less load than a front-side chain drive. The chain drive consists of sprockets A, B and C. The four camshafts are driven by the crankshaft by pinions A, B and C using a single-bush chain with two intermediate shafts. The required reduction ratio between the crankshaft and the camshaft is provided by the intermediate shaft. Hydraulic chain tensioners with built-in non-return valves are used for tensioning the chains. Oil is supplied via a separate riser.Pinion C Pinion BPinion APinion D327_010Note When removing and installing the balancer shaft and oil pump sprockets, attention must be paid to correct installation position as per the workshop manual.Oil pump drivePinion D drives the oil pump and the balancer shaft via a single roller chain. The chain drive is configured in such a way that the direction of rotation of the oil pump and the balancer shaft are reversed. The reduction ratio (i = 0.86) required for adapting the rotational speed of the oil pump is achieved by using different sprocket wheels.20 Continuously variable valve timingContinuous adjustment of the intake and exhaust camshafts is provided by hydraulic swivel motors. The adjustment range for intake and exhaust camshafts is 42° in the "advance" direction. The adjusters are locked mechanically until the start of adjustment (once the required oil pressure has been reached). The Simos control unit (J361) controls the adjustment process via intake camshaft timing adjustment valve -1- (N205), intake camshaft timing adjustment valve -2- (N208), exhaust camshaft timing adjustment valve -1- (N318) and exhaust camshaft timing adjustment valve -2- (N319). Hall sender G40 (cylinder bank 1) and hall sender 2 G163 (cylinder bank 2) supply the signals required to locate the position of the intake camshafts, while hall sender 3 G300 (cylinder bank 1) and hall sender 4 G301 (cylinder bank 2) supply the signals required to locate the position of the exhaust camshafts.Hall sender G40 Exhaust camshaft timing adjustment valve -1- (N318)Intake camshaft timing adjustment valve -1- (N205)Hall sender 3 G300Intake camshaftExhaust camshaft327_020Variable valve timing adaptation A distinction is made between basic adaptation and fine adaptation. Basic adaptation After the engine is started, the camshafts remain in the starting position until their exact position has been determined in relation to the crankshaft. The values are stored in the Simos control unit. Basic adaptation is carried out when the voltage supply for the Simos control unit is disconnected or the fault memory is erased. Fine adaptation Fine adaptation is carried out after the engine is started if the camshafts are in the basic position and the coolant temperature is higher than 85 °C.21 3.2-litre V6 FSI engineBalancer shaftIn V6 engines with a cylinder angle of 90°, free inertial forces will cause the engine to run unevenly. A balancer shaft provides the necessary balancing of masses. The 3.2-litre V6 FSI engine therefore has a balancer shaft which is driven by the crankshaft via chain drive D. The timing chain is configured in such a way that the balancer shaft rotates in the reverse direction, thus allowing the inertial forces produced by the balancer shaft to counteract the first-order free inertial forces.Balancer shaftSplit conrod journalCrankshaft 327_01122 Intake manifoldDesignA new plastic variable inlet manifold was developed for the 3.2-litre V6 FSI engine. Flow losses were reduced through intensive testing and calculation. The intake manifold comprises an upper section and a lower section. The vacuum reservoir is an integral part of the intake manifold upper section.Intake manifold flapsThe variable inlet manifold has two intake manifold flaps operated by two actuating shafts. Both actuating shafts are interconnected by a pair of gears. The actuating shaft is vacuum-activated by the intake manifold change-over actuator. The vacuum is controlled by the intake manifold flap changeover valve N239. The Simos control unit recognises the position of the intake manifold flaps via the variable inlet manifold potentiometer.Intake manifold upper sectionThrottle valve control unit J338Integrated vacuum reservoirStainless steel plateTumble flapIntake manifold lower section 327_012Tumble flapsThe tumble flaps are housed in the intake port, which is split horizontally into two halves by means of an inserted stainless steel plate. The tumble flaps seal the lower part of the intake port, depending on the required flow intensity. Intensifying the air flow causes the air column within the combustion chamber to "tumble", thus optimising the swirl conditions for air-fuel mixture preparation. The tumble flaps are vacuum operated via the Simos control unit, which recognises the left-hand flap position via intake manifold flap potentiometer 2 G512 and the right-hand flap position via intake manifold flap potentiometer G336.23 3.2-litre V6 FSI engineOil circuitDescriptionThe pressurised circulating lubrication system is driven by an internal-geared wheel oil pump (Duocentric) with an oil strainer on the inlet side. The oil pump is located in the oil sump. A pressure relief valve operating in parallel provides overload protection (11 bar ) for the oil cooler and oil filter in the cold-running phase at low ambient temperatures. The cylinder heads are supplied with oil via two separate risers per cylinder head. The first riser supplies the pivot element with hydraulic clearance compensation and the camshaft bearing. The second riser supplies the tensioners for the camshaft timing chains and the camshaft adjusters. The separate risers isolate the cylinder head supply from the pulsation caused by the dynamics (changes in volume) of the camshaft adjuster and the chain tensioner. When the engine is running, the oil temperature and oil level are monitored by the oil level/oil temperature sender G266. The sender is integrated in the bottom section of the oil sump. The oil pressure retaining valves ensure that enough oil is present in the cylinder head and that proper lubrication is provided as quickly as possible after the engine is started.Main oil galleryOil filter moduleRiser 2 Oil pump driveRiser 1Stacked-plate oil coolerReturn-flow channelDuocentric oil pump327_01324 Cooling systemCooling circuitThe conventional coolant pump is accommodated in the V of the central crankcase. The pump is driven by a ribbed V-belt. The coolant flows via the cylinder crankcase to the water jackets in the engine. To maximise cooling efficiency at the cylinder heads, coolant flows diagonally through the cylinder heads from the outlet side. The coolant thermostat is located adjacent to the coolant pump in the cylinder crankcase, resulting in short flow paths duringshort circuit operation.Heater heat exchangerExpansion tankVent screwOil coolerCoolant thermostatCoolant run-on pump V51327_092CoolerCoolant pump25 3.2-litre V6 FSI enginePetrol direct injection system with supply on demand fuel systemFuel supply systemThe fuel supply system consists of the low and high pressure systems. The low-pressure system consists of: – the fuel supply unit – the fuel filter and – the fuel lines The high-pressure system consists of: – – – – – – the high-pressure fuel rail the pressure sensor the pressure limiting valve the high-pressure fuel injection pump the high-pressure fuel lines and the high-pressure injectorsHigh-pressure pumpLow-pressure systemThe fuel pump control unit J538 adjusts the fuel pressure in the low-pressure system on demand and is activated by the Simos control unit J361 using a pulse-width modulated (PWM) signal. Control unit J538 activates the fuel pump (presupply pump) G6 via an additional pulse-width modulated signal. The fuel pressure sender, low pressure monitors the fuel pressure and sends an electrical signal to the Simos control unit. The Simos control unit is thus able to gauge the current fuel pressure and modify the PWM signal as required, enabling the fuel pressure to be increased or decreased.Low-pressure sensor G410Quantity control valve N290Fuel filterHigh pressurePressureless to Simos control unit26 High-pressure systemThe fuel pressure in the high-pressure system is developed by the single-piston high-pressure pump. The pump is driven mechanically by a single threelobe cam located at the end of the cylinder bank 2 intake camshaft. The fuel metering valve N290 integrated in the pump regulates the fuel pressure within the range from 30 – 100 bar. The pump is activated by the Simos control unit. The Simos control unit monitors the pressure in the high pressure system via fuel pressure sender G247.High pressure sensor G247Injectors 4 – 6Pressure relief valveInjectors 1 – 3Fuel supply unit with fuel pump (pre-supply pump) G6 and fuel gauge senderFuel tank Fuel pump control unit J538 327_01427 3.0-litre V6 TDI engineDescriptionTechnical features– Camshafts driven by timing chains – Timing chain on the transmission side – Backlash compensation between the exhaust and intake camshafts – Balancer shaft rotating at engine speed, to compensate for crankshaft vibrations – Intake manifold with swirl flaps – Oxidation catalytic converter with lambda control – Electrically adjustable VTG turbocharger – Additive-free particulate filter (optional) (Catalysed Soot Filter) – Common rail diesel direct injection – High-pressure pump drive via toothed belt – Piezoelectric injectors – Dual-circuit cooling system – Oil circuit with Duocentric oil pump and cold start valve327_003Reference For further information, please refer to SSP 325, AUDI A6 ‘05 - Ancillaries.28 Performance featuresEngine code, torque and power outputThe engine code is located at the front left under the toothed belt for driving the high-pressure pump.327_015Torque/power curve500200Max. torque in Nm Max. power output in kWNmkW30012020080100400 1000 2000 3000 4000 5000Engine speed in RPMSpecificationsEngine code Type of engine Displacement in cm3ASB 6-cylinder vee-engine with 90° angle 2967 165 (224) at 4000 RPM 450 at 1500 RPM 4 83 91.4 17 : 1 1–4–3–6–2–5 Diesel, at least CN 51 Oxidation catalytic converter with lambda control, optional particulate filter Bosch EDC 16 CP (common rail) EU IVMax. power output in kW (bhp) Max. torque in Nm Number of valves per cylinder Bore in mm Stroke in mm Compression ratio Firing order Fuel grade Exhaust emission control Engine management Exhaust emission standard29 3.0-litre V6 TDI engineChain driveDriven camshafts, oil pump and balancer shaftThe short dimensions of the Audi vee-engines combined with the compact two-piece chain drive on the transmission side have made it possible to limit engine length to 444 mm despite the widening of the cylinder spacings from 88 mm to 90 mm. The chain drive comprises four simplex chains arranged in two planes. They drive the camshafts of the left and right banks of cylinders, the oil pump and the balancer shaft. The four simplex chains are divided into pinion gears A, B, C and D. The chains are driven by the crankshaft, which connects to chain drive A, which connects to the idler gears, which drive the camshafts via chain drives B and C. The necessary reduction ratio between the crankshaft and the camshaft is provided by the idler gears. The oil pump and the balancer shaft are driven by the crankshaft via chain drive D. Hydraulic chain tensioners with built-in non-return valves are used to tension the chains.Camshaft drive - pinion gear B Bank 1 Central chain drive - pinion gear ACamshaft drive - pinion gear C Bank 2Oil pump drive Balancer shaft drive327_042Crankshaft drive Second chain drive - pinion gear DBalancer shaftEngine vibrations are compensated by the balancer shaft. The balancer shaft is driven by chain drive D and counter-rotates relative to the engine at the same speed as the engine. The balancer shaft is installed in the vee of the engine. The unique feature of this configuration is that the balancer shaft is guided by the engine and the balance weights are located on the engine side opposite the drivetrain.Balancer shaft driveCounterweights 327_04330 Backlash compensationSpur gearThe spur gear of the respective exhaust camshaft is split in two to compensate for backlash between the intake and exhaust camshafts of each bank of cylinders.327_058 327_029The wider part of the spur gear is shrink-fitted onto the camshaft. The narrower part of the spur gear is attached to the camshaft by a circlip and pressed against the wider part by the diaphragm spring.327_031327_032Tooth backlash compensationThe diaphragm spring presses (axial force) the narrower part of the spur gear against the wider part with a defined force, with the result that the three ramps on the wider part of the spur gear are pressed into the three recesses in the narrower part. Due to the shape of the ramps and recesses, the two parts of the spur gear counter-rotate in relation to each other, resulting in an offset between the teeth and compensating for backlash.31 3.0-litre V6 TDI engineIntake manifoldSwirl flapAdjustable swirl flaps are incorporated into the intake manifold. The flaps are adjusted by the electrical swirl flap adjuster. They enable the airflow to be adjusted to suit engine speed and load. Not only additional power and torque result, but also lower fuel consumption and emissions. The electrical swirl flap adjuster is activated by the engine control unit, which is notified of the momentary position of the swirl flap by a potentiometer integrated in the swirl flap adjuster.Exhaust gas recirculation connection Exhaust gas recirculation current Intake manifoldThrottle valve positioner Intake airSwirl flaps Electrical swirl flap adjuster 327_033Throttle valve positionerTo reduce the compression effect and ensure a smooth engine shutdown, the throttle valve positioner is closed when the engine is shut down. When the engine is running, the opening and closing of the throttle valve positioner are mapcontrolled. As a result, the exhaust gas recirculation rate is regulated.32 ChargingElectrically adjustable turbocharger with variable turbine geometry (VTG)The 3.0-litre V6 TDI engine has a variable turbine geometry (VTG) turbocharger. The guide vanes in the turbocharger are adjusted by the turbocharger control unit. This provides enhanced turbocharger response and optimised boost pressure in all RPM ranges. The turbocharger control unit is activated by the engine control unit.Catalytic converter temperature sensor ITurbocharger control unitGuide vane adjustment327_034Temperature senderCatalytic converter temperature sensor I measures the charge air temperature. With this data, the turbocharger can be protected against overheating by the intervention of the engine control unit.33 3.0-litre V6 TDI engineFuel systemThe 3rd generation common rail system performs fuel/air mixture preparation. The fuel system has a high-pressure circuit, a supply pressure circuit, a low-pressure return circuit from the injector and a return pressure circuit.300 – 1600 barMax. permissible 1.8 barMax. permissible 1.6 barMechanical fuel pumpFuel metering valve N290 (fuel metering unit ZME) High-pressure pump CP3.2+ Pressure maintaining valve G410 with 10 bar Permeability in opposite direction at 0.3 – 0.5 bar fill pressure after injector repair work.Fuel temperature sender G81High pressure 300 – 1600 barBimetallic fuel pre-heating valveReturn pressure from injector 10 barMax. supply pressure 1.6 bar Max. return pressure 1.8 barFuel filter with water separator34 The maximum injection pressure is now 1600 bar, 250 bar higher than on earlier 2nd generation common-rail systems.Pressure sensor G247Rail element, cylinder bank II 4 5 6RestrictorRail element, cylinder bank I 1 2 3Pressure limiting valve N7510 barPiezoelectric injectors 1 – 3 N30, N31, N32 Mechanical crash valveFuel cooler (air) on vehicle undersideBaffle housingFuel tank Fuel pump (pre-supply pump) G6327_035 35 4.0-litre V8 TDI engineDescriptionTechnical features– Camshafts driven by timing chains – Timing chain on the transmission side – Ancillary units driven by chains – Toothed belt drive by means of a high-pressure pump – Backlash compensation between the exhaust and intake camshafts – Intake manifold with swirl flap – Electrically adjustable VTG turbocharger – Common rail diesel direct injection system – Dual-circuit cooling system – Oil circuit with Duocentric oil pump and cold start valve – Oxidation catalytic converter with lambda probe327_02436 Performance featuresTorque and power outputThe engine code is located in the inner vee of the engine block on the left-hand side of the cylinder head.327_091Torque/power curve700 200Max. torque in NmNm kWMax. power output in kW500 14040011030080200 0 1000 2000 3000 4000 500050Engine speed in RPMSpecificationsEngine code Type of engine Displacement in cm3ASE V8 TDI with two VTG turbochargers, DOHC 3936 202 (275) at 3750 RPM 650 at 1800 to 2500 RPM 4 81 95.5 17.5 : 1 1–5–4–8–6–3–7–2 Diesel, at least CN 49 Oxidation catalytic converter with lambda probes, water-cooled EGR, optional particulate filter Bosch EDC 16 C, EU IIIMax. power output in kW (bhp) Max. torque in Nm Number of valves per cylinder Bore in mm Stroke in mm Compression ratio Firing order Fuel grade Exhaust emission control Engine management Exhaust emission standard37 4.0-litre V8 TDI engineChain driveCamshaft driveThe 4.0-litre V8 TDI engine has a four-piece chain drive arranged in two planes. The chain drive is located on the transmission side of the engine. Chain drive A is the basic drive unit, which propels the camshaft chain drives B and C in the cylinder heads. Each of the intake camshafts is driven. Chain drive D drives the ancillary units.Chain drive CChain drive B Chain drive AChain drive D327_044Ancillary units driveChain drive D drives the oil pump, the coolant pump and the power steering pump. The gear module includes a ratio for coolant pump speed adjustment.Coolant pump Gear moduleChain drive A Oil pumpPower steering pump327_04638 Engine lubricationOil circuitThe oil circuit has an external gear type oil pump which is shaft-driven by chain drive D. The heat exchanger is incorporated into the inner vee of the engine. It is configured so that the oil temperature does not exceed 150 °C at maximum power output and in high ambient temperatures. The oil filter is mounted in an upright position inside the inner vee of the engine and is readily accessible for servicing.Crankcase ventilationA three-cyclone oil mist separator is used to remove oil particles from the blow-by gases. The cyclone oil separator is located inside the inner vee of the engine. The blow-by gases flow via the settling chamber and the three-cyclone oil mist separator - in which existing fine oil particles are separated - to the intake side of the turbocharger for the right-hand bank of cylinders. The separated oil flows back into the oil sump through a port in the crankcase.to intake side of turbochargerIntake manifold outletOil return pipe327_05439 4.0-litre V8 TDI engineCooling systemCoolant circuitThe coolant flows through the crankcase and the cylinder head according to the cross-flow principle. The coolant thermostat and the coolant pump are combined as a single unit and positioned at the front left-hand side of the engine. The coolant pump is driven by a stub shaft and a gear module via the oil pump from drive D. The coolant pump has two outlets on the pressure side, each leading to a single bank of cylinders. Located on both sides of the cylinder crankcase are cast-on coolant distributor rails, where the coolant is admitted into the cylinder water jackets through four holes. The crankcase coolant chamber is split lengthways into two halves. The main body of coolant is admitted into the cylinder heads, flows crosswise through the cylinder heads and returns to the crankcase on the inside of each bank of cylinders. A smaller quantity of coolant flows directly from the pressure side to the intake side of the crankcase through vee-shaped holes in the cylinder webs. This is required to cool the throughflow areas. In the main (larger) cooling circuit, the coolant from the cylinder banks and heat exchanger which has accumulated inside the crankcase circuit flows to the radiator. In the secondary (smaller) coolant circuit, the coolant flows directly to the coolant pump.Cylinder bank 1Cylinder bank 2to radiatorCoolant distributor rail Cylinder bank 1Coolant distributor rail Cylinder bank 2Outlet, cylinder bank 2Coolant pump Coolant thermostatOutlet, cylinder bank 1from radiator327_05240 Air intakeIntake moduleAir is induced through a double-chamber system with two air filters and two charge air intercoolers. The two charge air intercoolers are located below the front headlights. The intake manifolds and the pressure equaliser tube (for interconnecting the cylinder bank intake manifolds) are made from plastic to save weight and to reduce the friction of the intake air against the cylinder walls.Air filterAir filterAir inletTurbochargerCharge air intercoolerCharge air intercooler327_08641 4.0-litre V8 TDI engineSwirl flapsThe swirl flaps for shut-off of the helical inlet port at low engine speeds are located in the intake manifold. The flaps are injected into the flap frame (lower section of intake manifold) using a special production method. The 4.0-litre V8 TDI engine has a flap frame with a one swirl flap per cylinder for each bank of cylinders. The swirl flaps in each bank of cylinders are operated by an electric motor (swirl flap adjuster) and a connection rod.Pressure equaliser tube Swirl flap adjusterSwirl flap frameSwirl flaps from charge air intercooler327_048Swirl flaps closedA closed helical inlet port in the lower RPM range provides improved torque and combustion efficiency.Swirl flaps openThe helical inlet port is open in the mid and upper RPM ranges to maximise engine power output and combustion efficiency. The swirl flaps can be in one of two positions: open or closed.Swirl flaps closedSwirl flaps openSwirl flap frame 327_07242 Fuel systemInjection system componentsA second-generation common rail injection system which allows injection pressures up to 1600 bar is used. The system is configured similarly to the system used on the 3.3-litre V8 TDI engine. The three-piston high-pressure pump and the fuel rail are incorporated into the inner vee of the engine. The maximum permissible fuel temperature is maintained by using an under-vehicle fuel cooler and a low-temperature coolant-fuel heat exchanger. The heat exchanger is located below the highpressure pump and is supplied by an electrical coolant pump via a separate circuit.Fuel rail High-pressure pump Fuel filterRail element Cylinder bank 2Rail element Cylinder bank 1Armature InjectorsArmature Injectors327_053 Low-temperature coolant-fuel heat exchangerReference For a more detailed functional description of the fuel system, please refer to SSP 227 The 3.3-litre V8 TDI common rail injection system.Note After replacing, each injector must be adjusted to the injection system. Please use the function "Guided Fault Finding" or "Guided Functions" on the Audi diagnostic systems.43 4.0-litre V8 TDI engineChargingExhaust manifoldThe exhaust manifold is an air-gap insulated sheetmetal manifold. The turbochargers are midmounted below the exhaust manifolds. This spatial layout minimises exhaust gas heat losses due to the close proximity of the exhaust ports and turbochargers.Electrically adjustable VTG turbochargerThe engine has two turbochargers with a variable turbine geometry. The following modifications were made to the turbochargers: – – – – – Electrical actuator for enhanced response Coolant-filled central housing Exhaust gas temperature sensor Improved materials Improved bearings With these modifications, the turbochargers meet the requirements for higher exhaust gas temperatures, boost pressures and turbocharger speeds, as well as extended oil change intervals.Oil inletCoolant outletElectrical actuatorLinkage for adjusting the guide vanes Coolant inletOil outlet327_05144 Exhaust systemExhaust systemThe exhaust system comprises – – – – – pipe connections, air-gap insulated headpipes, two air-gap insulated exhaust manifolds, two primary catalytic converters and two main catalytic converters. For emission control, oxidation catalytic converters are used in addition to the engine-specific modifications. The exhaust system is double-chambered and the primary catalytic converters are positioned close to the engine so they reach operating temperature very quickly. The two main catalytic converters are located in the underbody area.Exhaust gas recirculation (EGR)Exhaust gases from the two banks of cylinders are recirculated separately. Exhaust gas is extracted from the exhaust manifold at the rear cylinder in each bank of cylinders. The exhaust gas flows into the intake manifold through ports cooled by the engine coolant. The necessary units (EGR valves, EGR cooler) for exhaust gas recirculation control are incorporated into the inner vee of the engine. The exhaust gas recirculation rate is controlled by two lambda probes.Exhaust gas inlet into intake manifold EGR valve327_056EGR coolerCoolant discharge from EGR cooler Exhaust gas extraction pointCoolant inlet for EGR cooler45 4.2-litre V8 engineDescriptionTechnical features– Camshafts driven by timing chains – Timing chain on the transmission side – Ancillary units driven by chains – Continuous intake camshaft adjustment – Two-stage intake manifold – Air-gap insulated, highly heat resistant sheetmetal manifold – Bosch ME 7.1.1 engine management system – Dual-circuit cooling system – Oil circuit with Duocentric oil pump – Closed-loop catalytic converters with lambda control and secondary air system327_005Reference For further information, please refer to SSP 217 - The V8 5V engine.46 Performance featuresTorque and power outputThe engine code can be found in the inner vee of the engine block, on the end face above the belt pulley.327_076Torque/power curve500 250Max. torque in Nm400 200 kW 150Max. power output in kWNm 3002001001005001000300050007000Engine speed in RPMSpecificationsEngine code Type of engine Displacement in cm3BMK 8-cylinder vee-engine 4163 220 (300) at 6200 RPM 380 at 2700 to 4600 RPM 5 84.5 92.8 11 : 1 1–5–4–8–6–3–7–2 Premium unleaded, 98 RON two primary catalytic converters and two main catalytic converters with lambda control Bosch Motronic ME 7.1.1 EU IVMax. power output in kW (bhp) Max. torque in Nm Number of valves per cylinder Bore in mm Stroke in mm Compression ratio Firing order Fuel grade Exhaust emission control Engine management Exhaust emission standard47 4.2-litre V8 engineChain driveCamshaft driveThe 4.2-litre V8 engine has a four-piece chain drive arranged in two planes. The chain drive is located on the transmission side of the engine. Chain drive A is the basic drive; it propels the camshaft chain drives B and C in the cylinder heads. In each case, the intake camshaft is driven. Chain drive D drives the ancillary units.Chain drive C Chain drive B Chain drive A327_069Chain drive D48 Ancillary units driveChain drive D drives the oil pump, the coolant pump, the power steering pump and the air conditioner compressor pump. The auxiliary drive has a gear module for adjusting the rotational speed of the coolant pump. The air conditioner compressor is driven by chain drive D via an additional gear module.Power steering pumpChain drive DCoolant pump327_085Air conditioner compressor Oil pump Gear module49 4.2-litre V8 engineContinuously variable valve timingCamshaft adjusters which operate according to the vane cell principle are mounted on the intake camshafts. They continuously adjust the intake camshafts, and hence the valve opening times, within a range of 52°.Camshaft adjuster, intake camshaft cylinder bank 1Camshaft adjuster, intake camshaft cylinder bank 2327_090AdjustmentThe internal rotor is connected to the camshaft and the timing case to the camshaft drive gear. The engine control unit adjusts the timing of the camshafts over the entire engine RPM range. The camshaft timing data is stored in a map. For adjustment, the inlet camshaft timing adjustment valve is activated by the engine control unit, thus displacing the adjusting piston. The displacement of the piston opens the passage to the oilway to a degree dependent on the activation signal. This allows the engine oil to flow through the timing advance port into the annular channel. From the annular channel, the engine oil flows through holes in the camshaft into the camshaft adjuster, where it exerts pressure on the vanes of the inner rotor, causing the rotor to counter-rotate relative to the timing case and adjust the camshaft timing. The timing retard is adjusted according to the same principle, albeit using different oil ports.Differential pressure bolt Working chamber B Camshaft sprocket Inlet advance positionWorking chamber ARotor in working chamberfrom inlet camshaft timing adjustment valveStator 327_089 Inlet retard position 50 Intake systemAir filterThe air filter has a compact design with paper round cartridge, front-end intakes and variable wheel-arch intakes. This minimises intake losses even in extreme conditions (spray, snow).Variable inlet manifoldThe variable inlet manifold has two paths. The ram tube is 705 mm long in the 'Torque' position and 322 mm long in the 'Power' position.'Torque' position327_094'Power' position327_093Note The mechanical design of the 4.2-litre V8 engine is otherwise identical to that of the 4.0-litre V8 TDI engine. Exception: cylinder heads51 6.0-litre W12 engineDescriptionTechnical features– Camshafts driven by timing chains – Timing chain on the transmission side – Continuous intake and exhaust camshaft adjustment – Dual-circuit cooling system – Liquid-cooled alternator – Wet-sump lubrication system – Catalytic converter with lambda control – Four air-gap insulated exhaust manifold/ catalytic converter modules – Pneumatically activated exhaust flaps – Inner exhaust-gas recirculation – Bosch Motronic engine management system327_006Reference For further information, please refer to SSP 267 - The 6.0-litre W12 engine in the Audi A8 - Part 1.52 Performance featuresTorque and power outputThe engine code is located at the front on the cylinder block, below the left-hand cylinder head.A Z C .. .AZC...327_077Torque/power curve600 300Max. torque in Nm Max. power output in kW500250400 Nm 300200 kW 1502001001005001000300050007000Engine speed in RPMSpecificationsEngine code Type of engine Displacement in cm3AZC 12-cylinder W-engine 5998 331 (450) at 6200 RPM 580 from 4000 to 4700 RPM 4 84 90.2 10.75 : 1 1–12–5–8–3–10–6–7–2–11–4–9 Super Plus unleaded, Euro-Super, 98/95 RON Closed-loop catalytic converter with 8 lambda probes, air-gap insulated exhaust manifold/ catalytic converter modules Bosch Motronic ME 7.1.1 EU IVMax. power output in kW (bhp) Max. torque in Nm Number of valves per cylinder Bore in mm Stroke in mm Compression ratio Firing order Fuel grade Exhaust emission controlEngine management Exhaust emission standard53 6.0-litre W12 engineChain driveCamshaft driveThe timing chains are located on the flywheel side of the engine. The camshaft is driven by a simplex (single-link) chain (primary chain) running from the crankshaft to the intermediate shaft, which connects to a further two simplex chains (secondary chains) running to cylinder banks 1 and 2. The required reduction ratio from the crankshaft to the camshaft is provided by the different diameters of the sprockets. The timing chain is tensioned by hydraulic chain tensioners.Cylinder bank 2 Chain tensioner Cylinder bank 2Cylinder bank 1Slide railSlide railIntermediate shaft chain sprocketChain tensioner Cylinder bank 1Chain tensioner, primary chain Slide rail327_078 Crankshaft chain sprocket54 Continuously variable valve timingThe four vane cell adjusters for exhaust and intake camshaft adjustment are supplied with pressurised oil via the engine oil circuit.Camshaft adjuster Exhaust camshaft Camshaft adjuster Intake camshaft Retard Camshaft adjuster Intake camshaft Advance E E Advance Retard Advance ACamshaft adjuster Exhaust camshaftRetardAdvance A Retard327_079 Cylinder bank 2 A – adjustment range, exhaust 11° (22° crank angle) E – adjustment range, intake 26° (52° crank angle) Cylinder bank 1Coil springCamshaft adjuster with springThe oil circuit has been optimised to ensure proper lubrication of the low-friction bearings under all operating conditions. However, an insufficient supply of oil to the camshaft adjusters can occur when the engine is hot-idling. To ensure sufficient oil pressure is available in order to advance the exhaust camshaft timing, an auxiliary coil spring resting on the adjuster housing helps to turn the internal rotor in the "advance" direction.327_09655 6.0-litre W12 engineCooling systemCoolant circuitThe coolant pump delivers coolant to the two cylinder banks, where the coolant flow is divided into two partial flows passing through the cylinder banks and cylinder heads. The coolant then enters the coolant reservoir in the inner vee of the engine, from where it flows to the cooler (primary coolant circuit) or the coolant thermostat and the coolant pump (secondary coolant circuit). Some of the coolant is tapped from the return line from cylinder bank 1 to cool the alternator and from the return line from cylinder bank 2 to supply the heat exchanger.Expansion tankVent pipeTemperature sender F18Coolant temperature sender G2/G62Non-return valve 2Continued coolant circulation pump V51Coolant thermostat ATF coolerVent screwsHeat regulation valve N175/N176Heat exchangerCoolant reservoir327_08056 Oil circuitWet-sump lubrication systemThe oil circuit in the Audi 6.0-litre W12 engine is designed as a wet-sump lubrication system. The oil filter and the oil cooler module are attached to the crankcase. The mounting bracket for the water-cooled alternator is located on the oil cooler module. The main bearings are supplied through an overhead oilway in the vee of the engine. The camshaft timing chains (secondarychains) have oil injection ports in the chain tensioner rails for lubrication and cooling. The contact surfaces on the primary chain are lubricated by the oil which flows back from the cylinder heads into the chain housing and through oil injection ports in the secondary chains.Oil retention valve Camshafts Bank 1Riser with oil retention valve Camshafts Bank 2 to intermediate shaftto chain tensionerCentral oil portRiserOil return pipeOil return pipe Piston injectors with oil pressure release valves Crankcase breather Return line Supply line Oil inlet from oil sump Main bearingMain oil port327_083Cyclone fine separatorBlow-by gases to intake manifoldPressure control valveOil separatorMounted on the intake manifolds are separator modules which remove oil particles from the blow-by gases. For this purpose, the blow-by gases are channeled to the oil separator through coarseparticle separators integrated in the cylinder heads and lines. A large proportion of the oil is separated at the inlet to the oil separator by baffle plate separators. Three cyclone fine separators operating in parallel separate the existing ultra-fine oil droplets and channel the blow-by gases through a pressure control valve into the cylinder bank intake manifolds. The separated oil collects in the bottom part of the separator and returns directly to the cylinder heads.Oil return pipe Ribs as coarse-particle preseparator 327_09557 6.0-litre W12 engineExhaust systemExhaust manifoldThe four 3-in-1 manifolds, the two headpipes and the four close-coupled catalytic converters have been combined to create four manifold/catalytic converter modules. Dispensing with a flanged connection between the headpipe and the manifold offers the following advantages: – enhanced inflow to the close-coupled catalytic converters – no flange-related heat loss – better pipe layout – reduced weightManifold/catalytic converter module 1Manifold/catalytic converter module 2327_098Inner exhaust gas recirculationNitrogen oxides are reduced by the internal exhaust gas recirculation system. The proportion of exhaust gas recirculated is defined by the intake and exhaust camshaft adjustments.327_08258 Information on engine selection Vorsprung durch Technik www.audi.co.ukAll rights reserved. Technical specifications subject to change without notice. Copyright AUDI AG I/VK-35 Service.training@audi.de Fax +49-841/89-36367 AUDI AG D-85045 Ingolstadt Technical status: 08/04 Printed in Germany A04.5S00.10.20327