TECHNICAL DOCUMENTATION
SSP 811213 – The High-Voltage System in the ID4

This PDF is currently unavailable.
Read document text
Self Study Program 811213The High-Voltage System in the ID.4Tablet FormatVolkswagen Group of America, LLC Volkswagen Academy Published in U.S.A. 1/2021 Course Number SSP 811213©2020 Volkswagen Group of America, LLC. All rights reserved. All information contained in this manual is based on the latest information available at the time of publishing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, LLC., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. All requests for permission to copy and redistribute information should be referred to Volkswagen Group of America, LLC. Always check Technical Bulletins and the latest electronic repair information for information that may supersede any information included in this booklet. Trademarks: All brand names and product names used in this manual are trade names, service marks, trademarks, or registered trademarks; and are the property of their respective owners.Table of ContentsIntroduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 High-voltage System Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Wiring and Connector Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 High-voltage System Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Thermal Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 High-voltage Safety Concept. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Driving Mode Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59IntroductionThe ID.4 High-Voltage SystemThe high-voltage system in the ID.4 is completely redesigned to integrate seamlessly with the MEB platform architecture. The battery is a part of the vehicle chassis, mounted low in the vehicle to provide a lower center of gravity. The ID.4 will initially be offered with an 82 kWh (gross) battery and a rear-mounted motor with 201 horsepower and 228 pound-feet of torque. Prior to launch, the Environmental Protection Agency (EPA) estimated 250 miles of range on ID.4 1st Edition and ID.4 Pro 82 kWh rear-wheel-drive models on a single battery charge. An all-wheel-drive version with 302 hp will follow later in 2021. At market introduction the ID.4 will be equipped with a 82 kWh battery. A 62 kWh variant will be available later. The 82 kWh battery has 288 cells in 12 modules. It is housed in a lightweight aluminum structure that is bolted to the body of the ID.4, helping to improve rigidity. The ID.4 can be charged with both alternating current (AC) and direct current (DC) fast-charging capability. The onboard charger allows the ID.4 to charge the battery up to 33 miles in about one hour, and charges to full in around seven and a half hours at a home or public Level 2 charger. At a DC fast-charging station, with 125 kW charging, the ID.4 can go from five to 80 percent charged in about 38 minutes.1The ID.4 High-voltage System OverviewComponent Location and InformationSelecting a component will hyperlink you to the page in this SSP with additional information.UX4 High-Voltage Battery Charging Socket 1ZX17 HighVoltage Heater A19 Voltage ConverterAX2 High-Voltage BatteryJX1 Power and Control ElectronicsVX81 A/C CompressorAX4 Charging Unit 1Z132 PTC Heater VX54 Three Phase Current Drive2The ID.4 High-voltage System OverviewHigh-Voltage Battery 1 AX2AX2 Specifications:Weight Net Energy Content Nominal Voltage Cell Technology Number of Modules Capacity Cooling System Operating Range Protection Range 842 - 1109 lb (382 - 503 kg) 58 kWh to 77 kWh 400 V Li-ion prismatic/pouch 9 - 12 156 Ah to 234 Ah Liquid Cooling -18 to 140° F (-28° to 60° C) IP6K7, IP6K9KReturn to the Basic Component Location and Information Page3The ID.4 High-voltage System OverviewThree-phase Current Drive VX54 with One-speed Transmission 0MHVX54 Specifications:Weight Output Torque Max. Engine Speed Transmission Ratio Drive Shafts Manufacturer 198 lb (90 kg) including JX1 Maximum 201 hp (150 kW) Maximum 228 lb/ft (310 Nm) 0 - 16,000 rpm 12.976:1 Inserted Volkswagen KasselReturn to the Basic Component Location and Information Page4The ID.4 High-voltage System OverviewHigh-Voltage Battery Charging Socket 1 UX4UX4 Specifications:AC – Connector J1772 – Number of Phases – Max. AC Charging capacity 2-3 7.2 kW - 11 kWDC – Connector – Max. DC Charging capacity – Communication: • PLC (Power Line Communication) communication with the charging station / charging cable • HLC (High Level Communication) for communication with the vehicle CCS (Combined Charging System) 50 kW - 125 kWReturn to the Basic Component Location and Information Page5The ID.4 High-voltage System OverviewCharging Unit 1 for High-Voltage Battery AX4Charging Unit 1 Specifications:– Input – Output – Number of Phases – Max. AC Charging capacity – Operating Range 78 V to 272 V 16 A to 50 A 220 V to 470 V Two 7.2 kW - 11 kW -40° F to 149° F (- 40° C - 65° C)– Efficiency 94%Return to the Basic Component Location and Information Page6The ID.4 High-voltage System OverviewPower and Control Electronics for Electric Drive JX1JX1 Specifications:– Voltage Range – Maximum Current – Frequency 150 V to 475 V 450 A 9 Hz to 10 HzThis component has an integrated capacitor, which is why a secondary voltage check is required when de-energizing the high-voltage system.Return to the Basic Component Location and Information Page7The ID.4 High-voltage System OverviewAir Conditioner Compressor VX81VX181 Specifications:– Type Scroll Compressor – Voltage – Functional Engine Speed – Max. Power Consumption – Ambient Temperature: • Air Conditioning Mode • Capable of Communication – Refrigerant for USA – Refrigerant for Canada 23° F to 158° F (-5° C to 70° C) -40° F to 158° F (-40° C to 70° C) R1234yf R744 195 V to 470 V 600 to 8,600 rpm 5.5 kWFor more information regarding refrigerants used, refer to SSP 881213 The Air Conditioning and Heat Pump Systems in MEB vehiclesReturn to the Basic Component Location and Information Page8The ID.4 High-voltage System OverviewPTC Heater Element 3 Z132Z132 Specifications:– Nominal Voltage – Activation – Max. Power Consumption – Input Current 150 V to 475 V 0 - 100 % 5.5 kW Maximum 30 A– Communication LIN-busReturn to the Basic Component Location and Information Page9The ID.4 High-voltage System OverviewVoltage Converter A19A19 Specifications:– Nominal Input Voltage – Charging Power 12 V – Diagnostic Address 150 V to 475 V 3 kW 8105Return to the Basic Component Location and Information Page10The ID.4 High-voltage System OverviewHigh-Voltage Heater (PTC) ZX17ZX17 Specifications:– Nominal Voltage – Activation – Maximum Power Input – Input Current – Weight – AC/DC Isolation 150 V to 475 V 0 - 100 % 6 kW Maximum 21 A 4 lb (1.9 kg) 10 MOhm– Communication LIN-busReturn to the Basic Component Location and Information Page11The ID.4 Wiring and Connector ConceptWiring ConceptA new high-voltage wiring concept is being use in Modular Electric Drive Matrix (MEB) vehicles. Thanks to the revised electromagnetic compatibility (EMC), shielded cables are not necessary. The EMC filters are adapted to the individual requirements of the different high-voltage components. They can be made of capacitors, restrictors or more complex circuitry. Key A19 Voltage Converter AX2 High-Voltage Battery 1 AX4 High-Voltage Battery Charger 1 JX1 Electric Drive Power and Control Electronics UX4 High-Voltage Battery Charging Socket 1 VX54 Three-Phase Current Drive VX81 A/C Compressor Z132 Heating Element (PTC) 3 ZX17 High-Voltage Heater (PTC)A19 VX81 AX2 Z132 ZX1712AX4 UX4 JX1 with VX54The ID.4 Wiring and Connector ConceptWiring JunctionsThe components do not require power distribution panels. They are replaced by wiring junctions in the high-voltage wiring harnesses. The wiring junctions in the rear area connect AX4 High-Voltage Battery Charger 1 to AX2 High-Voltage Battery 1 and the high-voltage components in the front of the vehicle. The wiring junction in the front of the vehicle connects the Z132 Heating Element (PTC) 3, the VX81 A/C Compressor, the A19 Voltage Converter and the ZX17 High-Voltage Heater (PTC) to the components in the rear of the vehicle. The small connectors in the high-voltage circuit are glued during production and cannot be separated.Connectors at the Front of the VehicleSmall Connectors Do Not Separate!13The ID.4 Wiring and Connector ConceptConnector ConceptThe connectors of high-voltage components are required to protect against foreign objects touching the contacts that carry life-threatening voltage. This is known as Ingress Protection (IP). The connectors on MEB vehicles have been designed with a higher ingress protection standard to ensure a greater degree of protection against penetration of a solid object (such as a finger). Because of this new connector concept with heightened touch protection, there is no longer need for a “pilot line” between all components in the high-voltage system.All HV wires in the ID.4 are connected mechanically. No screw connections on the wires are used.The electrical connectors are a new component developed for advanced accidental contact protection. To ensure that the contacts still have the necessary cross-sections, the connectors are wide.14High-voltage System ComponentsNetworkThe control units for the high-voltage components are connected to two data-bus systems. Both are 2,000 kBaud, ensuring high-speed information exchange. • CAN EV • Powertrain CAN busActuator 1 for Engine Sound Generator R257 is controlled by the CAN Display and Operation unit.J533CAN Display and Operation 500 KbpsCAN-EV 2000 KbpsPowertrain CAN-bus 2,000 KbpsKey A19 Voltage Converter J623 Engine/Motor Control Module J840 Battery Regulation Control Module J841 Electric Drive Control Module J842 A/C Compressor Control Module J848 High-Voltage Heater (PTC) Control Module J979 Heating and Air Conditioning Control Module J1050 High-Voltage Battery Charger Control Module J1208 Battery Module Control Module R257 Engine Sound Generator Actuator 1 V711 Radiator Blind Adjustment Motor Z132 Heating Element (PTC) 3R257J979J848 J842J840Z132 J1208 J12xxJ623 V711 J841A19 J1050...15High-voltage System ComponentsJ623 Engine Control Module - Location and FunctionsThe ECM is located on the right A-pillar in the vehicle interior. It has the following key functions: • Implementation of driver assist systems • Management of the torque requirement • Management of energy recovery intensity • Thermal management • Monitoring the high-voltage components (high-voltage coordination) The ECM performs the same functions as it does in all other high-voltage vehicles. The new central processor does not require the hybrid data-bus. The components are divided up into three different systems (CAN-EV, powertrain CAN-bus and CAN display and operating unit). The following components are connected directly to the ECM: • Accelerator Pedal Module GX2 • Temperature Sensor G18 • Radiator Fan VX57 • Control Motor for Radiator Roller Blind V711 (LIN-Bus) • Coolant Pump for Low-temperature Circuit V468 When energy recovery is performed, the CAN-Bus sends a signal to the Onboard Supply Control Module J519 that controls the brake lights.16High-voltage System ComponentsJ623 Engine Control Module - High-Voltage CoordinationThe high-voltage coordinator in the J623 manages the activation and deactivation sequence for the high-voltage system, and also prevents a system start if any anomalies occur in high-voltage components. Its functions are: • Coordination of all high-voltage sub-systems and networks involved • Implementation of defined operating states • Interface between the high-voltage functions and the other vehicle systemsHigh-voltage sub-systems refer to high-voltage functions that only require individual high-voltage components for implementation. For example: • The High-Voltage Battery 1 AX2 and the Charging Unit 1 for High-Voltage Battery AX4 are responsible for the charging process • The High-Voltage Battery 1 AX2, the Air Conditioner Compressor VX81 and the High-Voltage Heater (PTC) ZX17 are responsible for the air conditioning17High-voltage System ComponentsEngine Sound GeneratorsThe ID.4 has two engine sound generators to make the vehicle noticeable to pedestrians. One sound generator is located at the front of the vehicle, and one is located in the rear. The front sound generator is covered on this page, and the rear sound generator is covered on the next page. Sound is generated: • When the vehicle is stationary with a forward or reverse gear selected • in vehicle operation at speeds up to approximately 20 mph (25 km/h) in both forward and reverseEngine Sound Generator Actuator 1 RX21 - Location and FunctionThe Actuator 1 for Engine Sound Generator RX21 is located on the front right side of the vehicle behind the bumper. Sound is generated out the front of the vehicle. It is made up of: • The Engine Sound Generator Actuator 1 R257 • The Engine Sound Generator Control Module J94318R257 Sound OutletHigh-voltage System ComponentsEngine Sound Generator Module 2 RX22 - Location and FunctionThe Actuator for Engine Sound Generator Module 2 RX22 is located on the rear right side of the vehicle behind the bumper. Sound is generated out the rear of the vehicle when a forward or reverse gear is selected. Sound output is directed towards the road surface. It is made up of: • The Engine Sound Generator Actuator 2 R258 • The Engine Sound Generator Control Module 2 J1167R25819High-voltage System ComponentsJX1 Electric Drive Power and Control Electronics - Location and DesignThe Power and Control Electronics for Electric Drive JX1 are located on the three-phase current drive. They consist of the following components: 1. J841 Electric Drive Control Module 2. EMC and suppression filter 3. A37 Drive Motor Inverter 4. C25 Intermediate Circuit Capacitor 1 5. V141 Electric Drive Motor 6. Connections for coolant 3 The JX1 Electric Drive Power and Control Electronics are cooled using the VX54 Three-Phase Current Drive in the low-temperature cooling circuit. The JX1 is new and has improved current carrying capacity and continuous output. It has a watertight connection to the VX54 that can be replaced separately. The power electronics and e-machine are a single unit. If they are separated for any service procedures, a tightness test must be performed when assembling. No components in the JX1 can be replaced. 4 2 15620High-voltage System ComponentsJX1 Electric Drive Power and Control Electronics - FunctionsThe J841 Electric Drive Control Module is located inside of the JX1 and cannot be replaced separately. It has the following functions: • Implementation of the driver’s request • Monitoring the three-phase current drive temperature • Rotor position identification The following components are connected to the control module: • G712 Drive Motor Temperature Sensor • G713 Drive Motor Rotor Position Sensor 1 It regulates and monitors the three-phase current drive and controls the A37 DC/AC Converter for Drive Motor for the three-phase alternating voltage. J84121High-voltage System ComponentsJX1 Electric Drive Power and Control Electronics - FunctionsThe J841 Electric Drive Control Module uses G713 Drive Motor Rotor Position Sensor 1 to determine the speed and the position of the rotor in the V141 Electric Drive Motor. This data is used for exact activation of the electric drive motor. The G712 Drive Motor Temperature Sensor is used to determine the temperature of the V141. The component temperatures are determined using internal temperature sensors in the JX1 in the J841. J84122High-voltage System ComponentsVX54 Three-Phase Current Drive - LocationThe three-phase current drive is located in the rear of the vehicle together with the JX1 Electric Drive Power and Control Electronics. It is connected to the lowtemperature cooling circuit. It has the following components: • V141 Electric Drive Motor (rotor and stator) • G712 Drive Motor Temperature Sensor • G713 Drive Motor Rotor Position Sensor 1 The stator for the V141 is manufactured using the hairpin method. The individual stator elements look like hair pins, which is where the name comes from. In addition to the advantages for automated high volume production, the stator features better heat dissipation and lower rotor losses when compared to wound coil designs. StatorRotor23High-voltage System ComponentsVX54 Three-Phase Current Drive - G712 Drive Motor Temperature SensorThe G712 Drive Motor Temperature Sensor is located between two stator solenoids to improve signal detection. It is a Negative Thermal Coefficient (NTC) sensor and reports the temperature to the JX1 Electric Drive Power and Control Electronics. The signal is needed to prevent overheating of the V141 Electric Drive Motor. The de-rating of VX54 begins at approx. 160°CG71224High-voltage System ComponentsVX54 Three-Phase Current Drive - G713 Drive Motor Rotor Position Sensor 1G713 Drive Motor Rotor Position Sensor 1 is installed on the VX54 Three-Phase Current Drive and functions as an inductive sender with advanced evaluation. The sensor wheel is attached to the rotor of the electric drive motor, which drives it. The G713 determines the position, the direction of rotation and component tolerances. It has a direct connection to the JX1 Electric Drive Power and Control Electronics.Sender WheelG71325High-voltage System ComponentsAX4 High-Voltage Battery Charger 1The AX4 is located in the rear of the vehicle. It converts any Alternating Current (AC) into Direct Current (DC) for the high-voltage battery. The charging unit is regulated by the J1050 High-Voltage Battery Charger Control Module, which monitors and regulates the charging process. The DC charging process is also monitored and regulated by the J1050. A maximum DC charging rate of 125 kW is possible for the 82 kWh battery. These components have a direct connection to AX4: • F496 High-Voltage Charge Door Lock 1 Adjuster • L263 Charging Socket 1 LED Module • F498 High-Voltage Charging Connector Lock 1 Adjuster • UX4 High-Voltage Battery Charging Socket 1 with G853 Charging Socket Temperature Sensor 1 • G1151 Charging Socket 2 Temperature Sensor 1 • G1152 Charging Socket 3 Temperature Sensor 1Coolant ConnectionsAC InputDC Output26Low-voltage ConnectionHigh-voltage System ComponentsA19 Voltage Converter - Location and FunctionsThe A19 is located in the front of the vehicle and supplies the 12 V electrical system with energy. It has a maximum power of 16 V. The A19 uses bidirectional operation to charge and discharge the C25 Intermediate Circuit Capacitor 1 located in the JX1. This is why it is an additional source of high-voltage to supplement the AX2 High-Voltage Battery 1. It must also be checked to ensure it is de-energized when the high-voltage system is deactivated. It is cooled by coolant. The bidirectional operation of the voltage converter is only used for charging/discharging the C25. Recharging the high-voltage battery is not possible. Connections: • Terminal 30, 30 A • Terminal 31 • HV-positive and HV-negative • CAN-EVCoolant Connection High-Voltage Connection12V Charging Connections Low-voltage Connection27High-voltage System ComponentsZX17 High-Voltage Heater (PTC) - Location and FunctionsThe ZX17 is installed in the air-conditioning box in the ID.4. It heats the interior air and is infinitely variable using Pulse-Width Modulation (PWM). The High-Voltage Heater has a J848 High-Voltage Heater (PTC) Control Module of its own. This is controlled and monitored by the J979 Heating and Air Conditioning Control Module by means of LIN-Bus.High-Voltage ConnectionPotential EqualizationLow-voltage Connection28High-voltage System ComponentsZ132 Heating Element (PTC) 3 - Location and FunctionThe Z132 is located in the front end of the ID.4. It heats up the coolant for the high-voltage battery and is infinitely variable using Pulse-Width Modulation (PWM). Temperature sensors are located in the coolant inlet and outlet. The Z132 is connected to the J840 Battery Regulation Control Module by LIN-Bus.Coolant Connections High-Voltage ConnectionLow-voltage Connection29High-voltage System ComponentsAX2 High-Voltage Battery 1 - LocationThe AX2 is located between the axles under the vehicle. The battery housing is made of aluminium. Reinforcements have been installed inside the housing to provide the battery modules with the best possible protection in the event of an accident, both in the longitudinal and the lateral directions. There are additional lateral reinforcements below the housing. The housing is surrounded by solid extruded aluminium profiles.Internal ReinforcementsExtruded Aluminium Profiles30Make sure nobody enters the vehicle after the high-voltage battery is removed because the battery contributes to the overall body rigidity. Once the high-voltage battery has been removed, there is a risk of vehicle body damage due to distortion.High-voltage System ComponentsAX2 High-Voltage Battery 1 - Battery DesignsThere are two versions of the AX2 used in the ID.4 due to size and energy content. Only the 82 kWh battery will be available at launch. The maximum AC charge rate for each battery is: • 7.2 kW for the 62 kWh battery • 11 kW for the 82 kWh battery The maximum DC charge rate for each battery is: • 50 kW for the 62 kWh battery • 125 kW for the 82 kWh battery 9 battery modules 62 kWh gross 58 kWh net12 battery modules 82 kWh gross 77 kWh net31High-voltage System ComponentsAX2 High-Voltage Battery 1 - ComponentsThis is the ID.4 with an energy content of 82 kWh. The components in the 62 kWh battery are similar. Many battery components can be replaced for service procedures.J1208 - J1210 Battery Module Control ModulesBattery ModuleSX7 High-Voltage Battery Control Module, Negative TerminalSX8 High-Voltage Battery Control Module, Positive TerminalJ840 Battery Regulation Control Module32High-voltage System ComponentsAX2 High-Voltage Battery 1 - Electrical Connections in the AX2Low-voltage ConnectionPressure-Equalization ElementJX1 Electric Drive Power and Control ElectronicsTo the Wiring JunctionUX4 High-Voltage Battery Charging Socket 1High-Voltage Connections Assignment of the low-voltage connection T32g: • Terminal 30 • Terminal 30C • Terminal 31 • J234 Airbag Control Module • G898 High-Voltage Battery Coolant Temperature Sensor 1 • G899 High-Voltage Battery Coolant Temperature Sensor 2 • Pilot line • Z132 Heating Element (PTC) 3 • Powertrain CAN bus • V590 High-Voltage Battery Coolant Pump • V683 Mixing Valve for High-Voltage Battery Warming • V696 Mixing Valve 2 for High-Voltage Battery Warming33High-voltage System ComponentsAX2 High-Voltage Battery 1 - Battery ModuleThe battery modules of the ID.4 may have either prismatic cells or pouch cells. Prismatic lithium-ion cells made by LG will be used upon launch. Other suppliers may be added, depending on the market and date of use. Battery modules with different cell types will not be used in one battery. The battery modules are configured as 8 in series and 3 in parallel in the battery with 82 kWh. For the 62 kWh battery, the modules are arranged as 12 in series and 2 in parallel Due to the encapsulated aluminum housing, internal module circuit configuration can’t be determined. The difference is only indicated by the part number. Technical Data 62 kWh Cell technology Cell type Manufacturer Capacity per battery cell Number of cells Circuitry of the module Number of modules in battery Capacity of the module Nominal voltage of the module Energy content of the module Weight per module Lithium-ion Prismatic LG 78 Ah 24 12 in series, 2 in parallel 9 156 Ah 44.4 V 6.926 kWh approx. 66 lbs (30 kg) 62 kWh Battery Module 82 kWh Lithium-ion Prismatic LG 78 Ah 24 8 in series, 3 in parallel 12 234 Ah 29.6 V 6.926 kWh approx. 66 lbs (30 kg) HV-Negative 82 kWh Battery Module Connection to the Battery Modules Control Unit HV-Positive++ + - - - ++ + - - - ++ + - - - ++ + - - -34- - - ++ + - - - ++ + - - - ++ + - - - ++ +High-voltage System ComponentsAX2 High-Voltage Battery 1 - Switching UnitsThe components and functions have been divided up between two switching units. This allows them to fit into the different spaces required by the different high-voltage batteries. The intermediate circuit capacitor 1 C25 in the JX1 Electric Drive Power and Control Electronics in the ID.4 is pre-charged by the A19 Voltage Converter. This eliminates the need for a pre-charge relay and a pre-charge resistor.SX8 High-Voltage Battery Control Module, Positive TerminalHV-Positive Connection, Battery ModulesHV-Negative Connection, Battery ModulesSX7 High-Voltage Battery Control Module, Negative Terminal3562 kWh battery configuration shown. To the High-Voltage Connections on the Battery HousingHigh-voltage System ComponentsAX2 High-Voltage Battery 1 - Switching Unit for SX7 High-Voltage Battery Control Module, Negative TerminalThe S415 Fuse for High-Voltage Battery Interruption is a pyrotechnic fuse and increases the level of safety in the high-voltage system. In the event of a fault, it can trip faster than a high-voltage relay. If the fuse has tripped, the entire SX7 unit must be replaced. It cannot be replaced or reset. There are voltage taps on the high-voltage connectors. The J840 Battery Regulation Control Module uses these to monitor the high-voltage connectors. G1132 Temperature Sensor 1 for High-Voltage Battery HighVoltage HeaterJ1058 High-Voltage Battery Power Output Protection 2J1053 DC Current Charge Protection 2HV-negative connection, battery modulesG848 High-Voltage Battery Voltage SensorG1131 High-Voltage Battery Voltage Sensor 2S415 Fuse for High-Voltage Battery InterruptionJX1 Electric Drive Power and Control ElectronicsHV-negative DC charging connection36High-voltage System ComponentsAX2 High-Voltage Battery 1 - Switching Unit for SX8 High-Voltage Battery Control Module, Positive TerminalThe SX8 unit has an internal S352 High-Voltage System Fuse 2. Once tripped, this fuse cannot be replaced or reset, requiring replacement of the entire SX8 unit. This fuse protects the following high-voltage sub-components • AX4 High-Voltage Battery Charger 1 • Z132 Heating Element (PTC) 3 • ZX17 High-Voltage Heater (PTC) • VX81 A/C Compressor • A19 Voltage Converter G1133 Temperature Sensor 2 for HighVoltage Battery High-Voltage Heater J1052 DC Current Charge Protection 1 J1057 High-Voltage Battery Power Output Protection 1S352 High-Voltage System Fuse 2HV-positive connection, battery modulesHV-positive Connection to the Wiring JunctionHV-positive DC Charging ConnectionJX1 Electric Drive Power and Control Electronics37High-voltage System ComponentsAX2 High-Voltage Battery 1 - J840 Battery Regulation Control ModuleFunctions of the J840:• Communication using the powertrain CAN-bus • Master control unit for the internal data-bus system • Monitoring and controlling the switching units in the high-voltage battery • Monitoring of the pilot line • Insulation resistance monitoring • Provision of measured values for the high-voltage battery • Activation of the S415 Fuse for High-Voltage Battery Interruption in the event of a fault38High-voltage System ComponentsAX2 High-Voltage Battery 1 - J840 Battery Regulation Control ModulePin assignment on the J840:• 32-pin connection: – Connection to the low-voltage connector on the battery housing (see electrical connections for AX2) – Connection to the J1208–J1210 Battery Modules Control Modules (CAN-bus and LIN-bus) – Additional Ground connection to the battery housing • 12-pin connection: – Voltage signals before and after the high-voltage connectors in the switching units for high-voltage battery • 40-pin connection: – S415 Fuse for High-Voltage Battery Interruption – G1132 Temperature Sensor 1 for High-Voltage Battery High-Voltage Heater – G1133 Temperature Sensor 2 for High-Voltage Battery High-Voltage Heater – G848 High-Voltage Battery Voltage Sensor – G1131 High-Voltage Battery Voltage Sensor 232-pin Connection12-pin Connection40-pin Connection39High-voltage System ComponentsAX2 High-Voltage Battery 1 - J1208–J1210 Battery Module Control ModulesA maximum of four battery modules are connected to each battery module control unit. Two or three control units are used, depending on the size of the battery. Functions of the J840 Battery Regulation Control Module (through the J1208-J1210): • Monitoring the cell voltages • Monitoring the module temperatures • Cell balancing The 22-pin connections connect the battery modules control units to the individual battery modules. The 12-pin connection is used for connecting other battery modules control units or the J840. The ID.4 battery cells have passive balancing. This means that all battery cells are discharged to the voltage level of the weakest battery cell using resistors.22-pin connections12-pin connection40Thermal ManagementBatteryAll high-voltage batteries in the ID.4 have an active thermal management system. The aluminium heat sink is located outside of the battery housing. This prevents contact between coolant and the high-voltage components inside of the battery housing. The high-voltage battery modules are connected to the base of the battery housing by a thermally conductive paste. The aluminium heat sink is also connected to the housing base with a thermally conductive paste. The solid aluminum underbody guard protects the heat sink from mechanical damage.Upper part of Battery Housing Battery HousingCoolant Connections Heat Sink for the HighVoltage BatteryUnderbody Guard for the High-Voltage Battery41Thermal ManagementBatteryThe coolant temperature sensors are connected directly to the J840 Battery Regulation Control Module. The control unit uses the sensor information to regulate the V590 High-Voltage Battery Coolant Pump. The battery cooling not only occurs when the vehicle is moving, but can also be activated during charging. This significantly reduces battery temperature increases, especially when using DC charging. This allows for a faster charging rate, even for repeated charging processes. The high-voltage battery can be both actively cooled and heated. This happens depending on the internal battery temperature. • 46°F: heating by the Z132 Heating Element (PTC) 3 • 95°F (in vehicle operation): cooling by the heat exchanger for heat condenser • 86°C (during charging): cooling by the heat exchanger for heat condenser It can also be integrated into the low-temperature cooling circuit. Different operating states are shown on the following pages. G898 High-Voltage Battery Coolant Temperature Sensor 1 G899 High-Voltage Battery Coolant Temperature Sensor 2High-Voltage Battery Coolant InletHigh-Voltage Battery Coolant Outlet42Thermal ManagementThe Coolant Circuit without a Heat PumpAt a temperature of 59°F (15°C) or higher the thermostat opens, allowing coolant to flow to the radiator. The mixing valve can be used to integrate the battery into the low-temperature circuit, or to maintain the correct temperature in a separate circuit with the Z132 Heating Element (PTC) 3. The J840 Battery Regulation Control Module controls thermal management of the high-voltage battery. In the version without a heat pump, it regulates the V683 Mixing Valve for High-Voltage Battery Warming and the V590 High-Voltage Battery Coolant Pump. The V468 Low Temperature Circuit Coolant Pump is always activated by the J623 Engine Control Module. 13 12 1 11 2 3 1. VX54 Three-Phase Current Drive 2. JX1 Electric Drive Power and Control Electronics 3. AX4 High-Voltage Battery Charger 1 4. V468 Low Temperature Circuit Coolant Pump 5. V683 Mixing Valve for High-Voltage Battery Warming 6. Heat Exchanger for Heat Condenser 10 4 7. Z132 Heating Element (PTC) 3 8. AX2 High-Voltage Battery 1 9. V590 High-Voltage Battery Coolant Pump 10. A19 Voltage Converter 6 5 7 11. Radiator 12. Thermostat 13. Coolant Expansion Tank 8 943Thermal ManagementThe Coolant Circuit with a Heat Pump (not for US vehicles)The coolant circuit has been adapted for the ID.4 with a heat pump, including the V696 Mixing Valve 2 for High-Voltage Battery Warming. The heat exchanger for heat condenser and the Z132 Heating Element (PTC) 3 are now installed in branches of the coolant circuit that can be separately controlled. This is necessary to allow the heat exchanger for heat condenser to be activated individually when the heat pumps are operating, and to heat the battery using the Z132 Heating Element (PTC) 3 at the same time. 14 13 1 2 12 The J840 Battery Regulation Control Module controls thermal management of the high-voltage battery. In the version with a heat pump, it regulates the V683 Mixing Valve for High-Voltage Battery Warming, V696 Mixing Valve 2 for High-Voltage Battery Warming and the V590 High-Voltage Battery Coolant Pump. The V468 Low Temperature Circuit Coolant Pump is always activated by the J623. A number of potential switch variants are shown on the following pages. 1. VX54 Three-Phase Current Drive 2. JX1 Electric Drive Power and Control Electronics 3. AX4 High-Voltage Battery Charger 1 4. A19 Voltage Converter 5. V468 Low Temperature Circuit Coolant Pump 6. V683 Mixing Valve for High-Voltage Battery Warming 7. Heat Exchanger for Heat Condenser 8. Z132 Heating Element (PTC) 3 11 9. AX2 High-Voltage Battery 1 10. V590 High-Voltage Battery Coolant Pump 11. V696 Mixing Valve 2 for High-Voltage Battery Warming 7 6 8 9 10 12. Radiator 13. Thermostat 14. Coolant Expansion Tank34 544Thermal ManagementCooling and Heating Strategies for Vehicles with a Heat Pump (not for US Vehicles)Radiator bypass active - Battery is not cooled or heatedPrerequisites: • Temperature at the thermostat 59°F (15°C) • Battery temperature 47°F (8°C) to 95°F (35°C) • No demand by the heat pump ThermostatThe versions shown here do not show all possible operating modes. Other ambient conditions, customer requirements and component temperatures may require other operating modes.The thermostat opens the radiator bypass. The V696 Mixing Valve 2 for HighVoltage Battery Warming activates the minimum possible low-temperature cooling circuit. The V468 Low Temperature Circuit Coolant Pump is activated when the heat pumps are operating, and to heat the battery using the Z132 Heating Element (PTC) 3 at the same time. V468 V696V683V59045Thermal ManagementCooling and Heating Strategies for Vehicles with a Heat Pump (not for US Vehicles)Radiator bypass active - Battery is heatedPrerequisites: • Temperature at the thermostat 59°F (15°C) • Battery temperature 47°F (8°C) • No demand by the heat pump ThermostatThe versions shown here do not show all possible operating modes. Other ambient conditions, customer requirements and component temperatures may require other operating modes.The thermostat opens the radiator bypass, then the V696 Mixing Valve 2 for High-Voltage Battery Warming activates the minimum possible lowtemperature cooling circuit. The V683 Mixing Valve for High-Voltage Battery Warming activates the battery heating circuit. Both coolant pumps are activated. V468 V696V683V59046Thermal ManagementCooling and Heating Strategies for Vehicles with a Heat Pump (not for US Vehicles)Radiator flow - Battery is not cooled or heatedPrerequisites • Temperature at the thermostat 59°F (15°C) • Battery temperature 47°F (8°C) to 95°F (35°C) • No demand by the heat pump ThermostatThe versions shown here do not show all possible operating modes. Other ambient conditions, customer requirements and component temperatures may require other operating modes.The thermostat closes the radiator bypass, then the V696 Mixing Valve 2 for High-Voltage Battery Warming activates the minimum possible lowtemperature cooling circuit. Only the coolant pump for V468 Low Temperature Circuit Coolant Pump is activated. V468 V696V683V59047Thermal ManagementCooling and Heating Strategies for Vehicles with a Heat Pump (not for US Vehicles)Radiator flow - The battery is cooled by the heat exchanger for heat condenserPrerequisites: • Temperature at the thermostat 59°F (15°C) • Battery temperature 95°F (35°C) in vehicle operation • Battery temperature 86°F (30°C) when charging • No demand by the heat pump ThermostatThe versions shown here do not show all possible operating modes. Other ambient conditions, customer requirements and component temperatures may require other operating modes.The thermostat closes the radiator bypass, then the V696 Mixing Valve 2 for High-Voltage Battery Warming activates the minimum possible lowtemperature cooling circuit. The V683 Mixing Valve for High-Voltage Battery Warming activates the battery coolant circuit. Both coolant pumps are activated.V468V696V683V59048Thermal ManagementCooling and Heating Strategies for Vehicles with a Heat Pump (not for US Vehicles)Radiator flow - Battery is cooled by low-temperature circuitPrerequisites: • Temperature at the thermostat 59°F (15°C) • Battery temperature 86°F (30°C) • No demand by the heat pump ThermostatThe versions shown here do not show all possible operating modes. Other ambient conditions, customer requirements and component temperatures may require other operating modes.The thermostat closes the radiator bypass, then the V696 Mixing Valve 2 for High-Voltage Battery Warming opens the connection to the battery. The V683 Mixing Valve for High-Voltage Battery Warming activates the battery coolant circuit. Both coolant pumps are activated.V468V696V683V59049Thermal ManagementCooling and Heating Strategies for Vehicles with a Heat Pump (not for US Vehicles)Radiator flow - Battery is not cooled or heatedPrerequisites: • Temperature at the thermostat 59°F (15°C) • Battery temperature 47°F (8°C) to 86°F (30°C) • Demand by the heat pump ThermostatThe versions shown here do not show all possible operating modes. Other ambient conditions, customer requirements and component temperatures may require other operating modes.The thermostat closes the radiator bypass, then the V696 Mixing Valve 2 for High-Voltage Battery Warming opens the connection to the battery. The V683 Mixing Valve for High-Voltage Battery Warming activates the battery heating circuit. Only the V468 Low Temperature Circuit Coolant Pump is activated. V468 V696V683V59050High-voltage Safety ConceptSafety MeasuresThe high-voltage safety concept was modified for the ID.4. Some of these are carryover from the previous high-voltage concept. Safety measure overview: • Color coding of the high-voltage wiring and connectors • Safety markings on all high-voltage components • Accidental contact protection • Emergency cut-out connections: Maintenance connector for high-voltage system Fuse on the A-pillar with a small “flag” • Pilot line • Insulation resistance monitoring• Electrical isolation between high-voltage system and body (terminal 31) • Active discharging • Passive discharging • Crash shutdown • Monitoring of the high-voltage relays • Short-circuit test • Short-circuit shutdown • Detection of open circuits in high-voltage wires51High-voltage Safety ConceptMarkingColor coding of the wiring and connectorsAll high-voltage connectors and wiring are orange to make identification easier.Safety markings on all high-voltage componentsAll high-voltage components are marked with warning stickers. There is an additional high-voltage warning on the lock carrier in the engine compartment with a yellow background. These warning stickers are relevant for the vehicle safety inspection.52High-voltage Safety ConceptAccidental Contact ProtectionAll high-voltage connectors are equipped with improved accidental contact protection (IPXXB+, touch-proof). A smaller test finger is used. High-voltage potentials inside of the components are sealed off by a cover with coded screws and cannot be opened during service work. Accidental contact protection has also been used inside the high-voltage battery. The Electromagnetic Compatibility (EMC) filters are adapted to the individual requirements of the different high-voltage components. They can be made of capacitors, restrictors or more complex circuitry.Shielding of the high-voltage wires is not required. The EMC measures are implemented in the high-voltage components by the EMC filter.53High-voltage Safety ConceptEmergency Cut-out ConnectionsThe emergency cut-out connections are the TW Maintenance Connector for High-Voltage System in the left side of the engine compartment, and the SC28 Fuse 28 (on Fuse Panel C) on the left A-pillar.The TW Maintenance Connector for HighVoltage System disconnects terminal 30 A and pilot line.The fuse SC28 has a small “flag” on it. When removed, terminal 30 A is disconnected. The small “flag” is attached to allow quick removal without tools. The small “flag” can be replaced separately and the fuse is commercially available.Terminal 30 A (previously terminal 30 C) in the ID.4 supplies both the voltage for the high-voltage relay in AX2 High-Voltage Battery 1 and the supply voltage for the A19 Voltage Converter. There is also a Bowden cable located in the trunk to release the charge plug if there is a problem.54High-voltage Safety ConceptPilot Line and Insulation Resistance MonitoringPilot LineThe pilot line is now only routed to the TW Maintenance Connector. It was removed from other areas because all high-voltage connectors have improved accidental contact protection. It is monitored by the J840 Battery Regulation Control Module. T32jSC28 TWPilot Line Terminal 30AJ840B298AX2 A19Insulation Resistance MonitoringThe insulation monitoring checks the electrical isolation of the high-voltage potentials to the chassis. When the value falls below a threshold of 510 kOhm, a yellow warning lamp illuminates on the instrument cluster. A red lamp appears when the value falls below 90 kOhm. DC charging is either deactivated or prevented. The insulation resistance monitoring is initiated by the J623 Engine Control Module and performed by the J840. Among other things, it is part of highvoltage system activation, which is monitored by the high-voltage coordinator. Its function and circuitry is similar to the insulation resistance monitoring in the e-Golf. A19 – Voltage Converter AX2 – High-Voltage Battery 1 B298 – Positive Connection 2 (30) (in Main Wiring Harness) J840 – Battery Regulation Control Module SC28 – Fuse 28 (on Fuse Panel C) TW – High-Voltage System Maintenance Connector T32j – 32-pin Connector, Onboard Supply Connection, on AX2 HighVoltage Battery 155High-voltage Safety ConceptActive and Passive DischargingActive DischargingIf there is an emergency shutdown of the high-voltage system, such as if a crash or the TW Maintenance Connector is removed, the high-voltage system is discharged within five seconds. Active discharging is performed in the JX1 Electric Drive Power and Control Electronics.Passive DischargingHigh-voltage components have capacitors in their circuitry. Passive discharge guarantees that the voltage falls to 60 V within two minutes of disconnecting the components from the high-voltage battery.56High-voltage Safety ConceptCrash ShutdownFollowing an accident that may damage components in the high-voltage system, the high-voltage system is shut down and actively discharged. Because a number of high-voltage components in the ID.4 are installed very close to the outer body shell, severe and minor accidents are treated the same. This means that in case of an accident, the high-voltage potential is immediately disconnected (by pyrotechnic means). This can be repaired in the workshop. The pyrotechnic disconnection is performed by the S415 Fuse for High-Voltage Battery Interruption in the switching unit for SX7 High-Voltage Battery Control Module, Negative Terminal.57High-voltage Safety ConceptMonitoring of the High-Voltage Relays and Short-Circuit TestMonitoring of the High-Voltage Relays• Each high-voltage relay has a voltage tap before and after the relay • If an unintended condition is identified to be affecting one of the high-voltage relays, the high-voltage system is deactivated until the defect is eliminated • A lamp is illuminated in the instrument clusterShort-circuit Test• When C25 Intermediate Circuit Capacitor 1 is being pre-charged, a current measurement is performedShort-circuit Shutdown• If a short circuit occurs during pre-charging, it is isolated and the high-voltage system is not activated • If a short circuit is detected when the high-voltage system is already activated, the high-voltage system is turned off • A lamp is illuminated in the instrument cluster58Driving Mode SelectionOverviewThe ID.4 features multiple driving mode selections: • ECO - The maximum speed is 130 km/h and the power output and A/C is reduced by approximately 30% • Convenience - On average, all systems are balanced • Sport - All systems are tuned for sporty characteristics • Individual - All systems can be configured individuallyLow Voltage ModesThe vehicle does not switch into ECO mode when the high-voltage battery is discharged. Instead, a yellow turtle is displayed in the dash panel insert and the power output is reduced. Yellow turtle (reserve mode): • A yellow turtle lamp appears in the ID display and an acoustic warning sounds. • Power output is reduced significantly, and may continue to be reduced. • The convenience functions of the A/C are reduced to extend the range Red turtle (absolute reserve mode): • After starting, the temperature or charge level of the high-voltage battery is too low. Only movement up to 7 km/h is possible. An emergency start of the vehicle can still be performed twice to allow movement over a short distance. The vehicle key must be in the center console compartment for an emergency start. When the charge level increases again, the warning lamp goes out. During vehicle operation: • If the charge level of the high-voltage battery is too low during operation, the vehicle may stop operating. Park the vehicle safely or drive to the next charging station if possible. When the charge level increases again, the warning lamp goes out.59Volkswagen Group of America 2200 Ferdinand Porsche Drive Herndon, VA 20171 January 2021