TECHNICAL DOCUMENTATION
SSP 891213 – The ID4 New Model Overview

This PDF is currently unavailable.
Read document text
Self Study Program 891213The ID.4 New Model OverviewTablet FormatVolkswagen Group of America, LLC Volkswagen Academy Published in U.S.A. 3/2021 Course Number SSP 891213©2020 Volkswagen Group of America, LLC. All rights reserved. All information contained in this manual is based on the latest information available at the time of publishing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, LLC., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. All requests for permission to copy and redistribute information should be referred to Volkswagen Group of America, LLC. Always check Technical Bulletins and the latest electronic repair information for information that may supersede any information included in this booklet. Trademarks: All brand names and product names used in this manual are trade names, service marks, trademarks, or registered trademarks; and are the property of their respective owners.Table of ContentsIntroduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Body. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 High-voltage Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Power Transmission. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Running Gear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Driver Assist Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Climate Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Infotainment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41IntroductionThe ID.4 - a Departure into a New EraIn the North American Region, the ID.4 launches a new defining model generation at Volkswagen. It is an electric vehicle built on the new Modular Electric Drive Matrix (MEB), that networks with the internet, has digital display and control elements, natural voice control and other pioneering technologies to signal the beginning of a new era. Intelligent, innovative and sustainable – the ID.41IntroductionProduction SitesThe Volkswagen ID.4 is being built at Zwickau and Chattanooga. Zwickau is playing a key role with the start of production: for the first time, a large car factory has been completely re-equipped for electric mobility. In the final expansion stage from 2021, the Zwickau plant will build six electric models for three Group brands with a volume of up to 330,000 vehicles per year. The site is developing into Europe’s largest and most efficient electric car factory and is leading the way in the transformation of Volkswagen’s global production network. Production of the ID.4 will be coming to Chattanooga in 2022. To support this, Volkswagen is expanding it’s Chattanooga operations with a 564,000 squarefoot electric vehicle expansion and a 198,000 square foot battery pack assembly facility. This will solidify Volkswagen’s hub for electric vehicles in the region. Along with increasing regional engineering capabilities, this step also supports the effort to localize all aspects of vehicle development and production.2IntroductionProduct Features of ID.4The Innovative and striking product features are:Disctinctive exterior lightingFive-link rear axleThree-phase current drive in different battery power levelsRear drum brakes with Electromechanical Parking Brake EMPBSecond Generation Electromechanical Brake BoosterModular high-voltage batterySingle-pinion power steering, speeddependentNew Keyless Access (KESSY) vehicle functionsEquipment varies from country to country.3IntroductionExteriorThe exterior of the ID.4 has the following features: • LED headlights • Illuminated light strips in the front trim on the left and right of the front VW badge • Panoramic glass sunroof (optional) • 19” and 20” alloy wheel rims • LED tail light clusters • Light strip between the VW logo and the tail lights • Composite rear wing above the rear glass4IntroductionInteriorThe interior of the ID.4 has the following features: • ID.Light, an intuitive light strip in the front area of the dash panel. It indicates locking status, driver assist information, navigation system information, braking prompts and incoming phone calls • Either 10 or 30-color ambient lighting across the dash panel, in the door handles and in the cell phone compartment in the center console • Multifunction steering wheel with touch control • 12” display and control panel with integrated temperature and volume adjustment • 5.3” dash panel insert with integrated driving mode selector • Pedals featuring “Play & Pause” design (1st Edition Only) • 30.3 cubic feet of cargo area with the rear seat up5BodyTechnical DataExterior dimensions and weights63.5 in (1,612 mm)REPLACE WITH ID.4 IMAGE853 mm108.9 in (2,766 mm) 180.5 in (4,584 mm)965 mm61.6 in (1,565 mm) 83 in (2,108 mm)62.5 in (1,587 mm) 73 in (1,852 mm)Weight and additional information Gross vehicle weight rating Curb weight according to DIN* Turning radius Ground clearance Drag coefficient** * DIN German Institute for Standarization ** According to equipment 5,644 - 6,019 lb 2,560 - 2,730 kg 4,599 - 4,888 lb 2,068 - 2217 kg 33.5 - 38 ft 10.2 - 11.6 m 6.4 in - 163 mm 0.28 Cd6BodyTechnical DataInterior dimensions and capacities30.3 ft326.8 in 29.7 in (753 mm) (681 mm)85.4 in (2,170 mm)42.4 in (1077 mm)Volume and power Luggage compartment volume Luggage compartment volume with rear seat backrest folded down Through load width between wheel housing Weight of high-voltage battery Nominal energy (net): Max. output front (optional) Max. torque front (optional) Max output rear Max Torque Rear 30.3 ft3 (858 liters) 64.2 ft3 (1817 liters) 39.4 in (1001 mm) 1087 lb (493 kg) 82 kWh 107 hp (80 kW) 119.5 lb-ft (162 Nm) 201 hp (150 kW) 228 lb-ft (310 Nm)7BodyBody Structure OverviewThe new strategy of the Modular Electric Drive Matrix (MEB) is based on the floorplan. The wheelbase is longer and the overhangs at the front and rear are shorter compared with the MQB. The battery is bolted to the vehicle floor between the front and rear axles. A battery located on the vehicle floor provides a lower center of gravity, more balanced weight distribution in the body and better driving dynamics. The interior space is also greater because many components normally found in an internal-combustion engine vehicle have been removed, such as space for the combustion engine, transmission, transmission tunnel, fuel tank and exhaust system. The electric drive motors are located directly on the axles, which saves space and also lowers the center of gravity. The front longitudinal members are connected directly to the ultra-high strength hot formed footwell cross member.Front Longitudinal MemberExtruded Inserts 160 MPa Mild steel 220 MPa High-strength steel Footwell Cross Member 1000 MPa Ultra-high-strength steel 1000 MPa Hot-formed steel Aluminium8420 MPa Extra-high-strength steelBodyBody StructureExtruded ProfileThe battery is protected by the hot formed side members that have internal extruded aluminium inserts. These side members absorb side impact energy and distributes it to other parts of the vehicle.3-part Inner Sill Panel (hot-formed)Aluminium Insert (extruded profile)Outer Side Member (hot-formed)Aluminium Insert (extruded profile)9BodyBody AssemblyRear LidThe rear lid on the ID.4 has: • • New Volkswagen logo • A one-piece rear lid with integrated spoiler on the upper sides • Side spoilers (“aerodecks”) on the rear lid • Black side spoilers and upper spoiler area • A trim panel under the spoiler that holds the third brake light Third Brake Light"Aerodeck" Side SpoilersNew Logo10BodyTensioning SpringBody AssemblyDoor HandleThe door handle on the ID.4 is significantly different from other Volkswagen vehicles. It is flush with the door panel. To open the vehicle, only a gentle touch is needed to activate the microswitch in the handle. This microswitch unlocks the lock, which opens the door. If the vehicle does not have electrical power, mechanical manual operation is possible. Using enough force the door handle can be moved upward, actuating the door latch via Bowden cable. If the vehicle loses electrical power when locked, a lock cylinder is located under a removable trim piece on the driver’s door handle. LED LightingRelease Sensor Mounting Bracket Anti-theft PanelManual Release Actuating ArmRocker SwitchSlide Mechanism Locking ElementLocking Plate11Red indicates the starting position of the handle locking assembly. Blue indicates when the door handle is in its locked and secure position.Eccentric Locking Element (used to lock the door handle into the mounting bracket)Safety EquipmentOccupant ProtectionThe ID.4 comes with the maximum range of safety features. Numerous assist systems ensure the highest possible level of safety and comfort. All ID.4 vehicles have the following standard features: • Driver and front passenger airbags • Front side airbag • Head airbags (curtain) front and rear • Belt tensioners on front and outer rear seats • Reversible belt tensioners with single-stage belt force limiters at front • Rear seat top tether Active Safety: • Multicollision Brake 2.0 • Front Assist with Pedestrian Monitoring • PreCrash basic • Emergency Assist Head Airbag Driver AirbagSide AirbagThe center airbag shown in this image is not for the North American market.12High-Voltage SystemOverview of High-Voltage ComponentsHigh-Voltage Battery Charging Socket 1 UX4 Voltage Converter A19 Three-phase Current Drive VX54Air Conditioning Compressor VX81Power and Control ELectronics for Electric Drive JX1PTC Heater Element 3 Z132High-Voltage Heater (PTC) ZX17 (inside of cabin in air distribution box) High-Voltage Battery 1 AX2Charging Unit 1 for High-Voltage Battery AX4The following two pages have a summary of each component. It can be accessed by selecting the hyperlinked text on this page or by scrolling to the next pages.13There is detailed information about the high-voltage system in SSP 81 1213 The ID.4 High-Voltage System.High-Voltage SystemA19 Voltage Converter provides the 12-volt electrical system with voltage and pre-charges the capacitor in the Power and Control Electronics for Electric Drive. It serves as a second energy source. AX2 High-voltage Battery 1 is a lithium-ion battery. This is located on the vehicle underbody. This placement provides a low center of gravity and optimized weight distribution. The High-voltage Battery 1 AX2 supplies the electrical energy for driving and is offered in both a 62 and an 82 kWh configuration. Only the 82 kWh battery will be available at launch.AX4 Charging Unit 1 for High-Voltage Battery is located in the rear of the ID.4. It converts the alternating current from the charging connection into a direct current for charging the high-voltage battery.58 (62) kWh77 (82) kWhVX81 Air Conditioning Compressor is integrated into the high-voltage system. It is used for heating both the interior and the high-voltage battery. JX1 Power and Control Electronics for Electric Drive converts the customer's power requests into electrical signals. The power electronics control the three-phase current drive. DC voltage from the highvoltage battery is converted into a threephase AC voltage for acceleration. Back to Overview Page14High-Voltage SystemUX4 High-Voltage Battery Charging Socket 1 can charge the high-voltage battery. Either AC or DC charging is possible. Status lights indicate the vehicle’s current charging status.Z132 PTC Heater Element 3 both heats the coolant for the high-voltage battery and for active heating. It is controlled by the Battery Regulation Control Unit J840 using LIN-bus communication.VX54 Three-phase Current Drive can drive the vehicle as an electric motor or charge the highvoltage battery as an alternator. The three-phase current drive is available in two different output levels that are softwarebased. The basic level provides 201 hp (150 kW) and the performance level provides 302 hp (224 kW)ZX17 High-Voltage Heater (PTC) is a cabin air heater and contains both the high-voltage heater (PTC) Z115 and the control module. It has an output of up to 6,000 watts and can be regulated in three stages. The air conditioning control module controls this heater.Back to Overview Page15TransmissionOne-speed Transmission 0MHGeneral DesignThe single-speed transmission 0MH is attached to the Three-phase Current Drive VX54 on the rear axle. When compared with the e-Golf transmission, it is considerably more compact, lighter and durable. However, the transmission design is very similar. There is no longer a parking lock in the transmission. This function is performed by the Electromechanical Parking Brake (EMPB). The following parts are located in the transmission: • Input shaft with gear Z1 • Output shaft with gears Z2 and Z3 • Differential with axle drive gear Z4 • Oil collector The output shaft allows the overall ratio to be created in two steps (Z1 + Z2, then Z3 + Z4). This creates a compact and lightweight design. Transmission Housing Oil CollectorInput Shaft with Gear 1 Output Shaft with the Gears Z2 and Z3 Differential with Axle Drive Gear Z416TransmissionOne-speed Transmission 0MHTechnical DataWorkshop/Internal Designation Gearbox code Number of gears Transmission stepsOne Speed Transmission 0MH/EQ310-1P UMG (ID.4) 1 2 Total: 11.53 Step 1: 2.957 (Z1=23; Z2=68) Step 2:3.9 (Z3=20; Z4=78) 310 Nm (229 lb/ft) 16,000 rpm 21.4 kg (47 lb) 0.81 + 0.1L / lifetime fill (always check the Repair Manual for the latest information) splined connectionTransmission ratiosMaximum input torque Maximum input speed Total Weight Oil quantity/maintenance Input shafts17TransmissionOne-speed Transmission 0MH - OperationDriving Mode Selection and Parking BrakeThe driving mode is selected using the drive mode selector located on the steering column switch module. The Electromechanical Parking Brake (EMPB) is activated with the EMPB Button E538. The button is connected directly to the ABS Control Module J104.Driving Mode SelectorEMPB Button E538Driving Mode SelectorWhen the driving mode selector is turned to select a gear, two detents can be overcome in both directions of rotation. If it is turned one detent upward, the forward gear D is selected. If it is turned again in that direction, it switches from D to B and vice versa. If the switch is turned one detent downward from this driving mode, driving mode N will be activated. If it is turned past two pressure points, R will be immediately selected. If, when turning upward, two pressure points are passed at once, the D/B driving mode previously deselected will be active again. This fast change allows the vehicle to be rocked free in case it is stuck. When released, the driving mode selector will always spring back to its initial position. The EMPB is engaged by pressing the button E538 or by using the Auto P function. Steering Column Switch Module with J52718TransmissionOne-speed Transmission 0MH - OperationDriving Mode DisplayTransmission Range Display is part of the Driver Information System Control Module with Display Unit J1254. The active driving mode is highlighted in amber. Inactive driving modes are white. D – Continuous setting for forward travel – The electric drive is in the normal program (automatic energy recovery is enabled when ECO assist system is activated). B– P– High energy recovery on deceleration or when off-throttle. The driven wheels are locked by the EMPB.N – The electric drive is in neutral position. No power is transferred to the wheels and the braking effect of the electric drive is not available. R – Reverse gear is engaged.19Running GearRunning Gear OverviewThe illustration shows standard and optional running gear for the ID.4. The following items are not pictured: • ABS/ESC by ZF-TRW is in a similar location to MQB vehicles • Second Generation Electronic Brake Servo (eBKV) • Staggered tires (different sizes front and rear) New five-link rear axle McPherson strut front suspensionRear drum brakes with Electromechanical Parking Brake (EMPB) Front disc brakes New Electromechanical Power Steering (EMPS), progressive and speed-dependentAdditional chassis information is located in the SSP 862213 ID.4 Chassis and Driver Assistance Systems.20Additional information on the 2nd Generation Electronic Brake Servo is located in the SSP 861213 The Second Generation Electromechanical Brake ServoDriver Assist SystemsDriver Assist SystemsThe illustration shows standard and optional driver assist and other safety systems for the ID.4. Adaptive Cruise Control (ACC) Front Assist emergency braking function with: • Pedestrian / cyclist monitoring • Oncoming vehicle braking when turning • Distance warning • Swerve support Lane departure warning - Lane Assist Rear View Camera Lane Assist Blind Spot Monitoring (Side Assist)Rear Traffic AlertEmergency Assist Park Distance Control with Rear Braking Travel Assist Tire Pressure Monitoring System- TPMS Dynamic Road Sign Display Light AssistMulticollision BrakeAdditional chassis information is located in the SSP 862213 ID.4 Chassis and Driver Assistance Systems.21Climate ControlClimatronic OperationGeneral OperationThe all-new look continues seamlessly through the interior. Futuristic, comfortable and clearly laid out. All Climatronic functions are simple and quick to activate using the large touchscreen (ID.Cockpit) and the light and visibility cluster on the left.ID.CockpitLight and Visibility Cluster22Climate ControlClimatronic OperationAll functions of the 1-zone and 2-zone Climatronic can be operated using the center touch screen. The direct access button below the screen opens the air conditioning menu. In the air conditioning operating display, three air conditioning menus are available: • Smart Climate (only with 2-zone Climatronic) • Classic Climate • Air CareDirect Access Button - Center Switch Module in Dash Panel EX22Air Conditioning Menu Button23Climate ControlSmart Climate MenuThe following functions are available in the “Smart Climate” menu. Only one can be selected at a time.Defog windows:• Volume of air flowing towards the windshield increases • The vent temperature is adjusted as needed • Air drying increases by lowering the evaporator temperatureWarm my feet:• Volume of air flowing into the footwell increases • Vent temperature increasesWarm my hands:• Volume of air flowing towards occupants increases • Vent temperature increasesFresh air:• Volume of air increases (without changing the air distribution) • Vent temperature decreases • Switch over from (automatic or manual) air recirculation mode to fresh air mode. Manual activation of air recirculation mode when the “Fresh Air” function is active will end the function.Quick cooling:• Maximum cooling output of the A/C systemCool my feet:• Volume of air flowing into the footwell increases • Vent temperature decreases24Climate ControlClassic Climate MenuThe Classic Climate menu has the familiar air conditioning system buttons and functions. If the Climatronic system is switched off, it can be activated using the ON/OFF function or using the defrost function button in the light and visibility cluster. The temperature regulation for the steering wheel and seat heating can also be activated and adjusted on this screen.Air Care MenuThis Air Care system has an air quality sensor to detect pollutants and an active biogenic filter to prevent them from coming into the cabin. This special filter is even more efficient than traditional pollen filters and stops fungal spores and extremely small allergens. When the Air Care function is activated in the Climatronic operating menu, fresh air is drawn in. The proportion of recirculated air in the interior is mixed and cleaned to provide a high level of air quality. In addition, an air quality sensor detects if the ambient air is polluted with certain harmful substances. If necessary, the Air Care Climatronic switches completely to air recirculation mode so that pollutants such as exhaust gases from other vehicles do not enter the interior.25Climate ControlVoice ControlMany operations in the ID.4 can be controlled using voice control. The system can be easily activated by saying “Hello ID...” (the wake-up phrase) or by pressing the Voice button on the steering wheel. The ID.4 will respond by saying by saying phrases such as “Yes?” or “What would you like to do?” and reacts intuitively to voice commands such as “I feel cold” when the 2-zone Climatronic is installed. New digital microphones drastically improve voice recognition and quality when making phone calls and pinpoint who is speaking (driver or front passenger)."I feel cold""Hello, ID..."26Climate ControlOperating Unit for Lighting EX59The front window defrost and heated rear window function have both been moved into the light and visibility cluster. This cluster provides all light and visibility functions into one easy-to-reach control.Windscreen defrost function on/offHeated rear window on/off27Climate ControlID.4 Component LocationsHeater and Air Conditioning Control Module J979The heater and air conditioning control module is located to the right of the air conditioning unit under the dash panel.Vehicle Interior Temperature Sensor G1090The vehicle interior temperature sensor is located between the center vent and the storage compartment in the center console.Heater and Air Conditioning System Control Unit J979Vehicle Interior Temperature Sensor G109028Climate ControlHeater and Air Conditioning Unit R1234yf/R7442-part Basic ConceptThe MEB has a completely new heater and air conditioning unit. The unit is two pieces. There is an intake box in front of the bulkhead (under the hood) and a distribution box in the cabin. Interior heating uses a PTC heating element. Vehicles utilizing R744 refrigerant (Canada) may be equipped with a heat pump heat exchanger system.Underhood Intake Box Intake Box Under the HoodRecirculated Air DuctDistribution Box in Cabin29Climate ControlHeater and Air Conditioning Unit R1234yf/R744Interior FilterThe dust and pollen filter is accessed through the engine compartment and can be removed by unclipping the cover. The air intake box is designed to accommodate two filters. The North American Region uses a single filter element.Cover30Interior FilterElectrical SystemNetworking in the ID.4There are new and extensive high-speed communication channels in the ID.4. These range in speed between 500 kbit/s and 1 Gbit/s. These modules utilize some existing, and some new bus systems.EV CAN-BusBattery CAN-BusMultifunction Steering Wheel CAN-Bus 500 kbit/sRunning Gear CAN-Bus 2,000 kbit/sPowertrain CAN-BusConvenience CAN-Bus2,000 kbit/s500 kbit/s2,000 kbit/s500 kbit/sDriver Assistance CAN-BusEthernetEthernetConnectivity CAN-BusMIB CAN-BusDisplay CAN-Bus2,000 kbit/s31100 Mbit/s1 Gbit/s500 kbit/s500 kbit/s2,000 kbit/sElectrical SystemNetworking in the ID.4Two new control modules, the J533 (ICAS1) and J794 (ICAS3) are the primary processors. ICAS (In-Car Application Server) modules are central computers/servers that bring together a variety of basic services and vehicle functions to control the vehicle systems.J533 (ICAS1)8123 8124 C002 C003AB CANJ794 (ICAS3)Ethernet BridgeEthernet, 100 Mbit/s8125 5F MIB CAN LVDS J965 J1192 J1193Ethernet Switch CON. CANEthernet 1 Gbit/s MIB CAN-Bus 500 kbit/s CAN-FD AB 2,000 kbit/s Convenience CAN-Bus 500 kbit/sJ1254 L385Convenience CANDriver Assist CANJ772 R242 J428 J519 J949 J666LVDS Connectivity CAN-Bus 500 kbit/sJ685J1194 J1195Legend 5F 8123 8124 8125 C002 C003 J428 J519 J525 J533 J666 J525Information Electronics Display Control Application Server 1 System 1 Adaptive Application Server 1 System 2 Java Application Server 3, System 1 for Infotainment Software Cluster, Imbedded 1 Software Cluster, Housekeeping 1 Control Module for Adaptive Cruise Control Vehicle Electrical System Control Module Digital Sound System Control Module Data Bus on Board Diagnostic Interface (ICAS1) Internet Access Control ModuleJ685 Front Information Display Control Head J794 Information Electronics Control Module 1 J949 Control Module for Emergency Call Module and Communication Unit J965 Access/Start System Interface J1192 Burglary Protection Control Module 2 J1193 Burglary Protection Control Module 3 J1194 Burglary Protection Control Module 4 J1195 Burglary Protection Control Module 5 J1254 Driver Information System Control Module with Display Unit L385 Dynamic Lighting Strip 1 for Information in Instrument Panel R242 Driver Assistance Systems Front Camera More information regarding the ID.4 networking system can be found in SSP 871213 ID.4 Electrical Systems.32Electrical SystemOnboard SupplyThe 12V battery is needed for the electrical demands of all 12V consumers. In addition, the 12-volt battery is needed to enable high voltage flow. The 12volt system controls the high-voltage contactors that connect the high-voltage battery to the high-voltage circuit. A electric vehicle with discharged 12-volt battery cannot be “started.” Once the high voltage system is enabled, the Voltage Converter A19 provides the 12-volt vehicle electrical system with power from the high-voltage battery.Battery Monitor Control Unit J367 Voltage Converter A19Negative Jump Starting Point 12-volt BatterySB Fuse Panel SA Fuse Panel12-volt WireHigh-voltage CableSC Fuse PanelPositive Jump Starting Point12-volt Main Supply Wire If a jump box is ever used to “start” and ID.4, do not leave it connected after the vehicle “starts.”33Electrical SystemExterior Lighting - HeadlightsTwo headlight assemblies are available for the ID.4: • Basic • High HeadlightBasic HeadlightHigh Headlight34More information regarding the ID.4 lighting system can be found in SSP 871213 ID.4 Electrical Systems.Electrical SystemTail Light ClustersOne tail light clusters is available on the ID.4. It uses LED technology.Tail Light ClusterLight Configuration35More information regarding the ID.4 lighting system can be found in SSP 871213 ID.4 Electrical Systems.Electrical SystemBackground LightingThe ID.4 has background lighting to illuminate different areas of the vehicle interior. The color of the lighting offers either 10 or 30 colors, depending on vehicle configuration. There are pre-configured lighting profiles and the option of individually configuring the background lighting in single colors. The single colors can also be assigned to the individual zones of the vehicle interior. These areas in the vehicle interior are illuminated in the selected color: • The control clusters on the doors • The trim strip in the instrument panel • The mobile telephone storage compartment Trim Strip in the Instrument PanelThe infotainment system background uses the dash panel color selection.Control Cluster in the DoorsMobile Phone Storage Compartment36Electrical SystemMultifunction Steering WheelThe steering wheel has controls for both the driver assistance systems and the media system. The controls for the driver assist systems are located on the left-hand side of the steering wheel. The controls for the media system are located on the right-hand side. The most important new features are: • Touch buttons: the conventional buttons and rocker switches have been replaced by touch buttons on the multifunction steering wheel for the ID.4 • Sliding and two-step operation: new digital functions like sliding and twostep operation are supported • Black panel effect: individual symbols on the touch buttons can be displayed and hiddenControls for Driver Assist SystemsControls for Media Playback37Electrical SystemID. LightID. Light is a light strip that stretches across the entire dash panel. Animated light patterns are displayed using LEDs. It is used as a secondary display for some vehicle functions. The ID.Light supports the following functions: • Welcome and goodbye • Locking and unlocking • Charging process • Navigation • Voice control • Incoming telephone call • Braking request from Front Assist • Activation of absolute reserve mode (when battery charge is very low) ID. Light38Absolute reserve mode is activated when the battery charge level is very low to save energy. More information about this mode can be found in the Owner’s Manual.Electrical SystemID. LightDisplay Area AssignmentsThe individual functions use different display areas along the light strip. The animations are shown in the indicated areas. Driver Centered Vehicle Centered Across Complete Width Note for Driver or Front Passenger A B C DWelcome & Goodbye Lock and Unlock Charging Process Navigation Voice Control Incoming Telephone Call Braking Request Absolute reserve ModeA, C C C C D B C C39Electrical SystemVehicle ActivationVehicle activation is executed by both the Data Bus on Board Diagnostic Interface J533 (ICAS1) and the Vehicle Electrical System Control Module J519. The J533 is the primary module. The J519 reads the ignition starter button and activates the terminal 15 relay. Process Start: Vehicle unlocked /driver seat not occupied The key approaches the vehicle and the vehicle unlocks.Comfort Ready: Driver seat occupied, ignition off, air conditioning active, infotainment activeThe "Comfort Ready" state allows the driver to operate the infotainment system and the air conditioning even when the ignition is off. It is activated when the seat occupied sensor detects a weight. The vehicle key does not have to be inside the vehicle. The high-voltage circuit is audibly closed upon activation. A "Welcome driver" message is displayed in the dash panel insert. The ignition can be activated using either the ignition starter button on the steering column or by pressing the brake pedal. The display in the dash panel insert switches to the standard view. In addition, all control displays are shown briefly. The word PARK informs the driver that the parking brake is activated.Ignition switched on PARKReady to Drive READYTo prepare the vehicle for driving, the driver needs to press the brake and select a gear. The parking brake disengages and the word READY appears in the dash panel insert. The vehicle slowly starts to roll once the driver releases the brake pedal.40InfotainmentDash Panel InsertJ1254 - Control Unit with Display Unit for Driver Information System• Diagonal display of 5.3” • Display resolution 800 x 400 pixels • Graphics content provided by ICAS3 (J794) • Integrated driving mode display using LED’s next to the display • Now only four warning lights in form of LED’s • Subscriber on Display and Operation CAN-Bus Driving Mode SelectorThe functions of J1254 differ greatly from MQB instrument clusters. For example, Infotainment content, vehicle status and driving data are not displayed. Also, the control module is not an immobilizer or component protection subscriber. The display is located in a housing with the drive mode selector and the parking brake button. The component does not have its own loudspeaker. All information and warning tones are output through the audio system.Control Unit with Display Unit for Driver Information System J125441InfotainmentDash Panel InsertViewThe driver can switch between three views with the VIEW touch control on the multifunction steering wheel: • Standard • Navigation • Driver assist systems Standard ViewThe vehicle always starts in the standard view. The following information can be shown in the display area: • Warning lamps • Pop-up warning and information messages • Current speed • Battery charge level and remaining range • Available power and currently used power (blue bar) • Energy recovery availability and current energy recovery intensity (green bar) • Driver assist systems • Navigation Navigation ViewVIEW Touch Control42Driver assist systems viewInfotainmentRadio NavigationDiscover Pro Navigation System• Display and control panel with 12” screen (measured diagonal) • Screen resolution: Up to 1666 x 820 pixels • Control module J794 behind glove box • Homescreen 2.0 • Display of navigation map on display and control panel • Contactless gesture control • Touch slider (touch-sensitive strip as used in Golf 2020) • FM and DAB+ radio reception • Data bus connections: – Ethernet 1 Gbit/s – Display and operation CAN busControl Module for Information Electronics J79443InfotainmentSound SystemTwo sound systems are available for the ID.4: Center Loudspeaker • Basic sound: 4 + 1 speakers • Premium sound: 6 + 1 speakers J949 OCU (location prior to week 10/20) Treble SpeakerThe standard center speaker has two functions: it is used both for music playback and for emergency call communication. To ensure it functions in an emergency, it is connected to the Control Module for Emergency Call Module and Communication Unit J949 (OCU). The remaining speakers are controlled by the 4-channel amplifier of the Information Electronics J794 (ICAS3). The sound system speakers are used for all acoustic warnings in the vehicle (parking aid and instrument cluster). J749 ICAS3 Bass Speaker Speakers Front Treble Front Bass Center Rear Broadband Basic Sound Sound Package J949 OCU (location after week 10/20) Broadband Speaker44InfotainmentAntenna SystemsMobile Communications AntennasThe illustration shows the mobile communication aerials. In vehicles with a panoramic sunroof, the Radio Data Transmission Antenna R180 and the Roof Antenna RX5 are located above the front camera. Radio Data Transmission Antenna R180 (only vehicles with panoramic sunroof) Control Module for Emergency Call Module and Communication Unit J949 (location prior to production week 9/2020)Telephone Baseplate R126 Roof Antenna RX5Internet Access Control Module J666 Control Module for Emergency Call Module and Communication Unit J949 (location after production week 10/2020) LTE Antenna 1 R297Transceiving Stabilization Control Module R308 LTE Antenna 2 R30645InfotainmentAntenna SystemsRadio AntennasThis illustration shows the antenna components. The ID.4 has a composite rear lid, so there is a central Ground connection. Network Connection Left Impedance Converter Ground Connection Frequency Modulation (FM) Frequency Filter in Positive Wire R179Right Impedance ConverterFrequency Modulation (FM) Frequency Filter in Negative Wire R178 Heated Wires in Rear Window46Volkswagen Group of America 2200 Ferdinand Porsche Drive Herndon, VA 20171 March 2021