TECHNICAL DOCUMENTATION
SSP 043 Exhaust emission

This PDF is currently unavailable.
Read document text
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted N 2 AUTO A. S. does not guarantee or accept any liability unless authorised by ŠKODA AUTO A. S. ŠKODA N2 N2 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�CO 2N2H 2O H 2O CO 2 N 2 N2SP43_02The environmental discussion in respect of the motorcar in our age centres on three subjects: – – – Exhaust emission Fuel consumption NoiseThe subject of this publication is not only the technology of motor vehicles, but also more extensive information, such as measuring methods and standards. This information is not a substitute for appropriate knowledge of applicable legislation as the standards and laws in force are subject to constant revision and updating in line with technical development.In this Self Study Programme you can inform yourself in detail on the subject of vehicle exhaust emission.2GBContentsTraffic Development Exhaust Components Reduction Measuring Method Standards Test Your Knowledge 4 5 12 17 20 22Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Servicexxxxxxxxxxxxxxxx FABIAServicexxxxxxxxxxxxxxxx FABIAService Service Service Service Servicexxxxxxxxxxxxxxxx FABIA xxxxxxxxxxxxxxxx FABIA xxxxxxxxxxxxxxxx FABIA xxxxxxxxxxxxxxxx FABIA xxxxxxxxxxxxxxxx FABIAS e r v i c eXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXYou will find notes on inspection and maintenance, setting and repair instructions in the Workshop Manual.GB3Traffic DevelopmentMobile and flexibleThe transportation of passengers and freight is a central performance sector of industry and at the same time an essential element of our affluent society. Millions of jobs are linked directly or indirectly to the "motorcar". In past years the car population has increased rapidly, the figures in our examples show the situation in Germany where by the end of 1998 it was close to 42 million vehicles. The large vehicle population is an expression of a high level of flexibility and mobility in modern society (not being tied to a fixed location). The road haulage industry has to satisfy high demands in terms of flexibility and the speed of reaction. Goods have to be supplied "just-in-time". Despite the high level of traffic, the road nevertheless represents the most flexible infrastructure for such requirements. The automobile industry is attempting to counteract the impact of intensified exhaust emissions by introducing appropriate new developments. A comparison between fuel consumption and new registrations of vehicles in Germany shows that this approach is able to bear fruit. Fuel consumption has increased only minimally although the number of new car registrations has jumped by about 13 %.Increase in registrations and fuel consumption Passenger traffic 1991 - 199830 %Freight traffic 1991 - 199820 %Number of registered vehicles (example: Federal Republic of Germany) mill.41,710 % +13,3 % +0,2 % 0%Registrations Consumption Registrations Consumption+36,8 %+32,9 %Cars36,8SP43_04This satisfying development is not an automatic process. 2,6 1,9 Governments create incentives for the Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guaranteeand or accept any consumers liability automobile industry the by with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� enacting strict standards and fiscal legislation. 1991 1998 The aim of this is to promote a development SP43_03 and purchasing behaviour which takes greater account of the environment. As the number of registered vehicles on the roads increases, an ever more significant role is played by the interaction between vehicle and environment. It is essential in future that there continues to be a further reduction worldwide in the extent of exhaust emissions which pollute the environment.Trucks, buses, …4GBExhaust ComponentsOverviewIn the ideal situation the end products which result from the complete combustion of fuel are CO2 and H2O. In the combustion process which in fact takes place in the engine of a vehicle, the exhaust gas may contain not only these components, but also additional ones, such as – uncombusted hydrocarbons, – partially combusted hydrocarbons, – thermal crack products as well as consequential products (e.g. soot particulates), – oxides of nitrogen and – sulphur dioxides (resulting from impurities in the fuel). Whenever the subject turns to the composition of the exhaust gases of a vehicle, the terms which are constantly mentioned include: – – – – carbon monoxide, hydrocarbons, oxides of nitrogen, and soot particulates.≈ 71 %SP43_05Elements of exhaust gas of petrol engines and diesel engines Petrol engines≈ 14 % HC CO2 H2O ≈2% N2 CO ≈ 13 % NOXDiesel engines≈ 12 % SO2 CO2 H2 O O2 ≈ 10 % ≈ 11 % PM HC ≈ 0,3 % NOX CO ≈ 67 %SP43_06What is frequently forgotten in such discussions is that these elements represent only a fraction of the entire quantity of exhaust. The explanations which follow are therefore intended to present the approximate composition of exhaust gases for petrol and diesel engines. The effect of sunlight is such that environmentally-damaging oxidants, such as ozone, peroxyl nitrates or organic peroxides may be produced from a part of the exhaust components. It is possible to reduce or in fact to avoid the creation of such harmful components by influencing the composition of the exhaust gases by means of numerous "engine" and "post-treatment" measures.N2Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted O - Oxygen unless authorised by ŠKODA AUTO A. S. Š KODA A. S. does not guarantee or accept any liability 2 AUTO with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�N2- Nitrogen Water/air humidity Carbon dioxide Carbon monoxide Oxides of nitrogen Sulphur dioxide Hydrocarbons Particulate matter (soot particulates)H2O CO2 CO NOx SO2 HC PMGB5Exhaust ComponentsComponents flowing into and flowing out of the combustion processThe illustration below is intended to present you with a schematic overview of the components which flow into and flow out of the combustion process in the engine.O2 N2Oxygen Nitrogen N2 O2EngineNitrogen OxygenH2O Water (air humidity)H2O Water CO2 Carbon dioxidesAir filter TankCatalytic converterCO Carbon monoxide NOx Oxides of nitrogen SO2 Sulphur dioxideProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP43_07HC HydrocarbonsHC Hydrocarbons S Sulphur (impurities)Particulate matter diesel soot particulates (PM)6GBDescription of exhaust componentsNitrogen - N2 is a non-combustible, colourless and odourless, non-toxic gas. It is the principal element of the air we breathe (78 % N2, 21 % O2, 1 % other gases) and is supplied to the engine together with the inducted air. The major part of the nitrogen flows out again in a pure form in the exhaust. A small part combines with oxygen to form oxides of nitrogen NOx (NO, N2O and NO2).SP43_08Oxygen - O2 is a colourless, odourless, tasteless, non-toxic gas. It is the most important element in the air we breathe. It is inducted through the air filter and is an essential element for the combustion cycle in the engine.SP43_09Water - H2O is inducted through the air filter Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted together unless with the air (air In authorised by Š KODAhumidity). AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� addition, itwith isrespect produced as a result of condensation during the "cold" combustion in the warming-up phase. It is an uncritical component of the exhaust.SP43_10GB7Exhaust ComponentsCarbon dioxide - CO2 is a colourless, noncombustible, non-toxic gas. It is produced when fuels which contain carbon (these also include petrol and diesel fuel) are combusted. During this process, the carbon bonds with the oxygen. As a result of the discussion on climatic change (heating-up of the atmosphere - the so-called greenhouse effect) the subject of CO2 emissions has moved more and more into the forefront of public awareness. CO2 reduces the protective effect offered by the ozone layer from the ultraviolet rays of the sun.SP43_11Carbon monoxide - CO is a colourless and odourless, explosive, toxic gas! Even minor concentrations in the air we breathe are fatal as the transportation of oxygen of the red blood cells is blocked. In normal concentrations in the atmosphere, it oxidises within a short time to form CO2.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP43_12Oxides of nitrogen - NOx are compounds between nitrogen and oxygen (e.g. NO, N2O ...). They are produced during the combustion process in the engine if a high pressure, high temperature and oxygen excess exist. Certain oxides of nitrogen are harmful to your health! Measures aimed at reducing the fuel consumption of a vehicle can unfortunately result in an increase in the concentration of oxides of nitrogen in the exhaust as more effective combustion results in higher temperatures in the combustion chamber.SP43_138GBSulphur dioxide - SO2 is a colourless, pungent smelling, non-combustible gas. It promotes diseases of the respiratory passages! It occurs in slight quantities in the exhaust if a fuel containing sulphur is used. It is possible, by reducing the sulphur content in the fuel, to achieve a corresponding reduction in the sulphur dioxide emission in the exhaust.SP43_14Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Hydrocarbons - HC are fuel elements which unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� occur in the exhaust after incomplete combustion. They may be present in manifold forms as uncombusted or partially combusted elements (C6H6, C8H18, ...).Their effects on the human organism differ. Certain irritate sense organs, while other have a carcinogenic effect (e.g. benzene).SP43_15Particulate matter - PM, according to USA legislation, comprises all those materials which in normal conditions are contained in the exhaust in the form of solid matter (ash, soot) or liquid. The effect which soot has on the human organism has not yet been fully clarified at present.SP43_16Lead - Pb In view of the fact that lead causes damage to the catalytic converters, the car must be operated with unleaded fuel. The introduction of unleaded fuel has made it possible to completely eliminate lead from vehicle exhausts.GB9Exhaust ComponentsDevelopment of the compositionOverall development It is not only in Europe, but also throughout the world, that resolutions and legislation has been enacted in recent years with the aim of reducing the emission of harmful air substances. In this connection, particular emphasis has been placed on the increase in road traffic. In response to this, the automobile industry, motivated by the stricter emission regulations in the USA and Europe, has developed improved and more effective technologies for reducing or even avoiding certain pollutants in the exhaust. The development of the quantities of exhaust gases shows that there has been a significant reduction in the pollution of the air resulting from road traffic between 1990 and 1998. This reduction in emissions will be continued in the years to come.Quantities of the most important exhaust components emitted in road traffic 1990 / 1998 (taking example of the Federal Republic of Germany)100 % 151 Mill. t 171 Mill. t 1,3 Mill. t 0,9 Mill. t 6,7 Mill. t 3,0 Mill. t 1,5 Mill. t 0,4 Mill. t 0,041 Mill. t 0,036 Mill. t100 %+13 %–31 %–55 %–73 %–12 %Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�1990199819901998199019981990199819901998CO2NOxCOHCPMSP43_17The exception to the downward trend illustrated, is shown by CO2. The emission of CO2 is closely linked to the fuel consumption of a vehicle. New technologies have indeed made it possible to improve fuel consumption, but the growing number of registered vehicles and the trend in favour of more powerful and heavier vehicles, has tended to counteract this positive development in the recent past.In the meantime, it has proved possible to put a cap on the growth in CO2 emissions, and it will be possible to achieve a reduction in future.10GBComparison between car and truckThe developers of future vehicles will by necessity take a close look at which vehicle groups produce which exhaust components. A comparison of the distribution of the quantities of exhaust components reveals the difference between car and truck traffic. Despite the fact that the road haulage sector has for some time now not shown the same growth in the numbers of vehicles registered and in the total vehicle mileages compared to car traffic, it is primarily trucks which are responsible for the emission of certain exhaust components. The road haulage industry, as a result of the use of heavy diesel engines, is also responsible for producing a high portion of the oxides of nitrogen NOx and the soot particulates PM, whereas car traffic contributes the greater portion of emissions in terms of carbon dioxide CO2, carbon monoxide CO and hydrocarbons HC.Percentage distribution of the most important exhaust components in road traffic 1998 (taking example of the Federal Republic of Germany)65 %35 %Carbon dioxide CO242 %Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� 58to%Oxides of nitrogen NOx85 %15 %Carbon monoxide CO76 %24 %Hydrocarbons HC26 %74 %Particulate matter PMSP43_18Passenger traffic Freight trafficGB11ReductionIt is no longer sufficient nowadays to optimise individual vehicle subsystems in respect of fuel consumption or the composition of the exhaust gas. Rather, it is necessary to regard the vehicle in question as a whole in development terms and to then harmonise all the individual vehicle subsystems to each other. Within this all-embracing vehicle development, it is possible to emphasize three basic strategies aimed at reducing exhaust emissions: – – – Improving fuel consumption Emission control and post-treatment Operational check of exhaust-relevant systemsThe sections which follow explain in greater detail the measures taken in respect of these three strategies.Improving fuel consumptionAerodynamics Aerodynamically optimised vehicle shapes make it possible to achieve a lower aerodynamic drag for a car. A low aerodynamic drag is an essential element for achieving a low fuel consumption. In recent years, for example, within the VW Group, the aerodynamic drag (cd) has been reduced from an average of 0.45 to around 0.30. The ŠkodaFabia has a cd of 0.31. This is a good achievement. At the same time, though, at a speed of 100 km/h (about 65 mph), some 70 % of the energy produced is required for overcoming the aerodynamic drag.cw = 0,31Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP43_19Reducing weight Reducing weight to some extent runs counter to safety standards and the trend toward increasing comfort. Savings in terms of vehicle weight are essential, however, in order to be able to achieve an improvement in fuel consumption. A compromise between weight reduction and safety demands is possible. This is demonstrated within the VW Group by a number of existing models, the Audi A8, Audi A2, VW Lupo 3L as well as the ŠkodaFabia. An example from the ŠkodaFabia is the gearbox 02T which has a housing made of magnesium.SP43_21SP43_2012GBEngine management systems Modern engine management systems directly influence all the controllable components (actuators) fitted to the engine. What this means is that sensor signals, such as engine speed, air mass, charge pressure..., are transmitted to the engine control unit where they are analysed and control values are computed in respect of the quantity of fuel injected as well as the injection time, the ignition angle etc. This makes it possible to control the engine in line with the engine load and to optimise the combustion process.Engine management control loop Signals from the sensorsControl valueSP43_22Signals to the actuatorsFuel tank ventilation In order to ensure that none of the petrol vapours which evaporate in the tank (hydrocarbons HC) are able to escape to atmosphere, the evaporated petrol is stored in an activated charcoal filter and specifically metered to the combustion system.Activated charcoal filterSP43_24Exhaust gas recirculation valveExhaust gas recirculationRecirculated exhaust Protected by copyright. is not permitted Exhaust gas is once again supplied to the Copying for private or commercial purposes, in part or in whole, unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability combustion chamber. This measure makes it with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� possible not only to improve fuel consumption, but at the same time to reduce Inducted the maximum combustion temperature and ambient air Exhaust thus the proportion of NOx in the exhaust gas. Exhaust gas recirculation can be achieved by means of – appropriate valve overlapping or – controlled exhaust gas recirculation valves.SP43_25GB13ReductionEmission controlPetrol engine The task of the emission control is performed by the catalytic converters. The emission control process is regulated by the engine control unit. The basis for this are the oxygen concentrations in the exhaust gas, as signalled by the lambda probe. The engine control unit sets the fuel/air mixture to a ratio of λ ≈ 1, in other words it ensures that 14.7 kg of air are available for the combustion of 1 kg of fuel (stoichiometric equilibrium). The catalytic converter commences its cleaning effect from a temperature of about 300˚C. After a cold engine start, a certain heating-up time is required until this temperature is reached. To ensure that the exhaust gases are also cleaned before this time lapse, small-dimensioned pre-catalytic converters are used, which are installed close to the exhaust manifold. This makes it possible for them to more rapidly reach their operating temperature. The catalytic cleaning process employs two different types of chemical reactions: – Reduction; O2 is withdrawn from the exhaust gases Oxidation; O2 is supplied to the exhaust gases (post-combustion of CO and HC)SP43_27Lambda control loop Signals from lambda probe (sensor)Modified exhaust to lambda probeSignals to fuel injection, throttle valve etc. (actuators)SP43_26Reduction–Oxides of nitrogen NOX are reduced to form nitrogen N2 and carbon dioxide CO2Oxidation … … CO to CO2 … HC to CO2 and H2OHProtected by copyright. Copying for private or commercial purposes, in part or in whole, is H not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�HSP43_28SP43_29Carbon monoxide CO is oxidised to form carbon dioxide CO2Hydrocarbons HC are oxidised to form water H2O and carbon dioxide CO214GBDiesel engine Diesel engines operate with an air excess in the fuel/air mixture (λ 1). That is why the oxygen concentration in the fuel/air mixture is not controlled. The emission control takes the form of postcombustion, which is achieved by means of an oxidation catalytic converter. The high concentration of residual oxygen in the exhaust gas is used for this post-combustion process. Hydrocarbons HC and carbon monoxide CO are significantly reduced as a result. What this means is that, on a diesel engine, there is no control of the catalytic exhaust cleaning process and that an oxidation catalytic converter is able only to convert oxidisable exhaust components.WaterMain elements of particulate matter (PM)CarbonSulphur and sulphur compoundsSP43_30Concentrations of oxides of nitrogen in the Hydrocarbons exhaust are not affected by this postcombustion. They can be reduced only by means of design measures (such as the Protected of by copyright. Copying for private or commercial purposes, part or in whole, is not permitted shaping the combustion chamber and in the unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability design of the fuel injection system). with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� If the combustion in the engine takes place with a slight air excess, this results in a rise in the emissions of carbon monoxide (CO), hydrocarbons (HC) and particulates PM (soot). The soot particulates which are typical for a diesel engine, consist of a core and several bonded components, of which it is possible to oxidise only the hydrocarbons in the oxidation catalytic converter. The soot particulates can be trapped only by using special soot filters (traps). Various systems have been developed for this purpose (e.g. steel-wool filter, ceramicmonolith filter or ceramic-coil filter). In order to ensure that such filters always offer their best performance, they have to be regenerated at certain time intervals by chemical or thermal methods.Ceramic soot trap (schematic)2 3 1 4SP43_311 - Exhaust inlet 2 - Ceramic plug 3 - Porous cell intermediate wall 4 - Exhaust outletGB15ReductionOperational checkThe operational check of all exhaust-relevant components and systems of a vehicle fitted with a petrol engine will already be familiar to you from the name "On-Board Diagnosis". This diagnosis was first employed in California, USA. The European version is known as "Euro On-Board Diagnosis" (EOBD) and is a legislative requirement since the beginning of 2000, at first only for the type testing of new vehicles fitted with a petrol engine. Legislation provides for diesel engines being included at a later date. Faults which impair the exhaust characteristics of a vehicle, are signalled by the exhaust warning light (also known as MIL - Malfunction Indicator Light) in the display unit of the dash panel insert. It is also possible to read out faults at the diagnostic interface of the vehicle.SP43_32Note: You will find more detailed information on this subject in SSP 39 on the EOBD.Schematic diagram of components monitored by the EOBD EOBDProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted HC unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability CO with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�NOxSP43_3316GBMeasuring MethodProcedureA type test must be conducted for newly developed vehicles. As part of this type testing, the exhaust emissions are also tested on a roller dynamometer using a specified measuring system. A defined driving cycle, which is close to practical driving, is simulated in this case. This makes it possible to obtain reproducible and comparable exhaust test results. Test: – – The specified driving cycle is performed. During the cycle, the exhaust, together with filtered ambient air, is inducted by the main blower in a uniformly defined airexhaust mixture flow. The same quantity of air-exhaust mixture is always inducted. If the vehicle produces more exhaust gas (e.g. during an acceleration phase), less ambient air is inducted. If the vehicle produces less exhaust gas, more ambient air is inducted.The measuring system performs the task of recording and analysing the exhaust components using the worldwide standard CVS (Constant Volume Sampling) dilution Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee accept any liability – Aor constant quantity is continuously method. with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� sampled from the air-exhaust mixture and pumped into a collecting bag.– The exhaust components in the air-exhaust mixture which has been collected, are measured, in relation to the entire "distance driven", and output as a measurement result (in grams/kilometers).Measuring instruments Additionally for diesel engine Driver control stationPM CO2 CO HC NOxAir filter for ambient air Blower for samplingCollecting bagMain blowerThermometer Cooler Pressure gauge Roller dynamometer Measuring system 17SP43_34GBMeasuring MethodDriving cyclesIn contrast to the collection of the exhaust gas and the definition of the emissions, there is no standard procedure laid down for the driving cycles in individual countries. Up until 1999 the so-called NEDC (New European Driving Cycle) was mandatory within the EU. A characteristic feature of this driving cycle was a lead time of 40 seconds before the measurement of the exhaust emission commenced. This lead time could also be regarded as a warming-up phase. This elimination of the lead time is in effect an intensification of the measuring method as all the exhaust components which are produced from the moment the engine is started from cold during the heating-up phase of the catalytic converter, are taken into account in the result of the measurement.Note: The following terms have also been adopted for the NEDC: When the emission standard EU III came into – MVEG (Motor Vehicle Emission effect on 01.01.2000 the lead time was deleted Group) driving cycle, based on the from the existing driving cycle. name of the working group Protected by copyright. Copying for private or responsible commercial purposes,within in part or in the whole, EU is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability Consequently, the measurement commences – ECE/EC driving cycle with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� the moment the engine starts.km/hPart 1 (urban driving cycle)Part 2 (outer-urban driving cycle)120 100 80 60 40 20 0 195 390 585 780 1180 secondsStart of measurementEnd of measurementCharacteristic parametersSP43_35Length of cycle: Mean speed: Maximum speed:11.007 km 33.6 km/h 120 km/h18GBEuropean exhaust limits are often compared with those applicable in the USA in view of the fact that the USA has played a pioneering role in the respect of the legal reduction in exhaust emissions. It is not, however, so easily possible to directly compare the different limits. The following comparison of the driving cycles is intended to illustrate this. In addition, the test results in Europe are expressed in grams per kilometer (g/km) while the results in the USA are stated in grams per mile (g/mile).In order to more clearly illustrate the differences between the European NEDC and the US FTP-75 cycle (Federal Test Procedure), the two curves in the illustration below have been superimposed on each other. They differ in terms of the – test duration – mean speed – maximum speed – speed intervals and – starting-off phase It is in particular the starting-off phase of the FTP-75 cycle which is stricter than that in the NED cycle because higher speeds are driven after a cold start during the heating-up phase of the catalytic converter.km/hFTP-75 driving cycle120 100 80 60 40 20 0NEDCProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability 1180 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�2477 secondsStart of measurementEnd of measurementSP43_36Note: The limits applicable in Argentina, Australia, Brazil, Canada, Mexico and South Korea are also based on the US FTP75 cycle.GB19StandardsStandards for car exhaust emissionAn important step along the path to a Single European Market is the harmonisation of the legal provisions which are intended to ensure unrestricted movement of goods and services within Europe. A basic requirement for this is that test regulations and standards in the individual states are considered as being equivalent. This prerequisite is created by adopting the EC Directives into national legislation, either as an appendix or in place of national regulations. Having explained in some detail the measuring methods involved, let us now turn our attention to the development of car exhaust limits. Before a type approval is issued for a new vehicle model, it is necessary to ensure that it observes the relevant limits. This Self Study Programme limits its look to the development of exhaust limits within the EU. Exhaust legislation of the Member States of the EU is based on Regulation ECE R15 or on Emission Directive 70/220/EEC and subsequent updates.Time schedule of standards EU II valid in EU:1996 2000 2005EU III valid in EU:1996 2000 2005EU IV valid in EU from:1996 2000 2005valid from … valid until …SP43_38The EU III Standard came into effect on 01.01.2000 and replaces the EU II Standard which was in force up and until that date.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The exhaust components of oxides of nitrogen NOx and hydrocarbons HC are listed as separate limits in the EU III Standard. Up until then, they have been stated together in the EU II Standard.20GBThe following graphs show the limits for the EU III Standard presently in effect and for the EU IV Standard which comes into effect from 2005. EU III Standard in effect since 01.01.2000NEDC without 40-second time leadvg/km 2,4 2,2 2,0 1,8 1,6 1,4 1,2 1,0 0,8 0,6 0,4 0,2 tPetrol engine2,300,20 CO HC0,15 NOxg/km 2,4 2,2 2,0 1,8 1,6 1,4 1,2 1,0 0,8 0,6 0,4 0,2Diesel engine0,640,560,50 0,05COHC + NOxNOxPMSP43_39EU IV Standard A further reduction in the limits will come into effect in 2005 with the EU IV Standard, which replaces EU III.Petrol engine g/km g/km 2,4 2,4 NEDC without 40-second Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted 2,2 2,2 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability time lead with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� 2,0 2,0 1,8 1,8 1,6 1,6 1,4 1,4 1,2 1,2 1,00 1,0 1,0 0,8 0,8 0,6 0,6 0,4 0,4 0,10 0,2 0,2 0,08t CO HC NOxDiesel enginev0,50 0,30 0,25 0,025 CO HC + NOx NOx PMSP43_40GB21Test Your KnowledgeWhich answers are correct? Sometimes only one. But, sometimes also more than one – or all of them! Please complete the blank spaces.1.In what respect do the exhaust components of a diesel engine and a petrol engine differ? A. The exhaust gases of a diesel engine have a greater concentration of oxides of nitrogen (NOx). The exhaust gases of a petrol engine do not contain any hydrocarbons (HC). Diesel engines operate with an air excess and therefore have a large concentration of residual oxygen (O2) in the exhaust gases.B. C.2.What is the basic strategy (or strategies) on which reduction of exhaust emission is based?unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability ...................................................................................................... with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted3.Which chemical reactions are responsible in a catalytic converter (petrol engine) for controlling exhaust emissions? ......................................................................................................4.Which element or elements of the particulate matter PM (soot) is (are) converted in the catalytic converter (diesel engine)? Please underline the element or elements!Main elements of particulate matter (PM) CarbonSulphur and sulphur compoundsSP43_30Water Hydrocarbon22GB5.Which emission standards are currently in effect within the EU? A. B. C. EU II EU III D46.Since the emission standard EU III came into force on 01.01.2000 the measurement of the exhaust emissions in the New European Driving Cycle (NEDC) A. B. C. is still based on a 40 s lead time is now based on a 20 s lead time is now based on no lead timeprior to the start of the measurement of the exhaust emissions.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB1. A., C.; 2. Improving fuel consumption, controlling emissions, operational check; 3. Oxidation, reduction; 4. Hydrocarbon; 5. B.; 6. C. Answers:23