TECHNICAL DOCUMENTATION
SSP 030 Engineering of the 85 kW Engine

This PDF is currently unavailable.
Read document text
Maximum power and torque - minimum emissions!SP30_25The range of petrol engines for the OCTAVIA is supplemented with the 2.0-litre engine. This engine is an addition to the EA 113 series. It makes use of components from the successful Group engine series. Consequently, the engine block is similar in design to that of the Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted 1.8-ltr. engine. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� The operation of components such as the coolant pump, coolant thermostat, oil pump and oil pump drive are identical to that described in SSP 19. The engine is characterized by control systems which greatly reduce the level of pollutants in the exhaust. It complies with the stricter EU IV emission criteria which will be incorporated in future by legislation in the new European driving cycle. This Self Study Programme is intended to make you familiar with the design of the engine and the new operational features. Planned further developments are also presented.2ContentsEngineering of the 85 kW Engine System Overview Positions of Components Mechanical Components of Engine Crankcase Breather Fuel Injection System Pistons Sensors PTFE Seals Secondary Air System Emission Control System Exhaust Gas Monitoring System OBD II Function Diagram Self Diagnosis Further Development of the 88 kW Engine Test Your Knowledge 4 6 8 10 12 13 14 16 17 18 22 24 27 30 31 34Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Servicexxxxxxxxxxxxxxxx OCTAVIAXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXServicexxxxxxxxxxxxxxxx OCTAVIAXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXServicexxxxxxxxxxxxxxxx OCTAVIAXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXService Servicexxxxxxxxxxxxxxxx OCTAVIA xxxxxxxxxxxxxxxx OCTAVIAXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXService Servicexxxxxxxxxxxxxxxx OCTAVIA xxxxxxxxxxxxxxxx OCTAVIAS e r v i c eXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXYou will find notes on inspection and maintenance, setting and repair instructions in the Workshop Manual.3Engineering of the 85 kW EngineEngineering at a glanceProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP30_25Code letter: AQY Design: 4-cylinder inline engine 1984 cm3 Displacement: Bore: 82.5 mm Stroke: 92.8 mm Compression ratio: 10,5 : 1 Rated output: 85 kW (115 HP) Engine management: Motronic 5.9.2 (electronically controlled, sequential fuel injection, fully mapped ignition, cylinder-selective knock control) Valves per cylinder: 2 Emission control system: Lambda control (2 Lambda probes), catalytic converterTechnical highlights: – – – – distributorless high-voltage ignition distribution with 2 twin-spark ignition coils overhead camshaft - OHC hydraulic bucket tappets reference mark and engine speed detection by means of sensor on crankshaft (toothed gear with 58 teeth and 1 gap of 2 teeth) phase detection by means of Hall sensor at camshaft secondary air system– –4P = Output M = Torque n = Engine speedProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP30_14– – –– – – –cross-flow cylinder head with swirl port and power-optimised inlet port two-section light alloy intake manifold stainless steel exhaust manifold, with cylindrical pipe for each cylinder, which are then merged in pairs (2-branch pipe manifold), Lambda sensor in front pipe flange front exhaust pipe as double pipe knock control system with 2 knock sensors new PTFE seals for crankshaft and camshaft compliance with EU IV standardThe 2.0-ltr. engine produces power output of 85 kW (115 HP) at a speed of 5200 rpm. The maximum torque of 170 Nm is available at 2400 rpm. Power output and torque are based on operation of the engine with premium unleaded RON 95 petrol. The engine can also be operated with regular grade unleaded RON 91 petrol. In this case, however, full power output is not available.5System OverviewMotronic 5.9.2 The new Motronic 5.9.2 introduces a number of technical improvements regarding starting of the engine, improved fuel consumption and reduction in exhaust emissions. It complies with the requirements of OBD II. The pollutant emissions are continuously monitored. Diagnosis relevant to the emission control is displayed by means of the readiness code.Engine speed sender G28Camshaft position sender G40Hot film mass air flow sensor G70 and Intake air temperature sender G42Throttle valve control unit J338 with Idling speed switch F60 Throttle valve potentiometer G69 Throttle valve positioner potentiometer G88Lambda probe G39Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permittedCoolant temperature sender G62Knock sensor I G61Knock sensor II G66 Additional signals: AC compressor on AC readiness Road speed signal6CAN-Bus -CAN-Bus +unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability Lambda probe downstream of catalytic with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� converter G130Exhaust gas warning lamp K83Motronic control unit J220Fuel pump relay J17 Fuel pump G6Injectors N30 ... N33Ignition coil 1 N Ignition coil 2 N128 Ignition output stage N122Activated charcoal filter solenoid valve N80Throttle valve control unit J338 with throttle valve positioner V60Heater for Lambda probe Z19Diagnostic connectionHeater for Lambda probe 1 downstream of catalytic converter Z29 Secondary air injection valve N112 Secondary air pump relay J299 and Secondary air pump motor V101 Additional signals: AC compressor off Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Fuel consumption signal unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP30_137Positions of ComponentsJ338G40N80RTPG61 G66G40 G61 G66 J338 N80 RTPCamshaft position sensor Knock sensor I Knock sensor II Throttle valve control unit Activated charcoal filter solenoid valve Fuel pressure regulator Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permittedunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�8N112 J220G42 G70G62Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�G28N N122 N128V101SP30_24Notes on the engine speed sender G28. If no signal is received, the engine stops. It cannot be started again.G28 G42 G62 G70 J220 N N112 N122 N128 V101Engine speed sender Intake air temperature sender Coolant temperature sender Hot film mass air flow sensor Motronic control unit Ignition coil 1 Secondary air injection valve Power output stage Ignition coil 2 Secondary air pump motor9Mechanical Components of EngineGeneral view of engineCylinder headWeight-reduced pistonsOil pan Oil pumpProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP30_22The crankshaft is mounted in 5 bearings. The cylinder block is a grey iron casting. The crankcase is ventilated through the cylinder head cover. Weight-reduced pistons minimize the moving masses of the engine. The cylinder head is manufactured from aluminium.The oil pan is manufactured from aluminium and is bolted at 3 points to the gearbox. The oil pump is an internal gear pump which is chain-driven by the crankshaft. Spray nozzles for cooling the pistons, with a spray nozzle being assigned to each piston.10Intake manifoldLightweight valve gearIntake pipeExhaust manifoldPower-optimised inlet portProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted SP30_23 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The cross-flow cylinder head is based on triedand-tested design details. It offers the following advantages: – optimised gas cycle for improving drivability and exhaust emissions by means of a swirl port and power-optimised inlet port. intake pipe on the front side of the engine is favourably positioned in the event of a crash as greater space exists between intake manifold and bulkhead. It is a twopart design.The exhaust manifold is a 2-pipe manifold. A further feature is the lightweight valve gear: – – – – hydraulic bucket tappets Ø 35 mm exhaust valves Ø 33 mm inlet valves Ø 40 mm valve stem Ø 7 mm–Stroke of inlet valve 10.6 mm Stroke of exhaust valve 10.6 mm11Crankcase Breatherelectrically heatedBreather housing Intake manifoldHeater elementSP30_12Task You will be familiar with the fact that the crankcase has a breather to compensate for the pressure difference.+30The crankcase is filledCopying from the oil pan up purposes, to Protected by copyright. for private or commercial in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability the cylinder head cover not only with oil mist with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� from the oil pan, but also with gases which escape out of the combustion chamber past the piston rings. As a result of the pumping movement of the pistons, this mixture of oil mist and gas flows back through the breather in the cylinder head cover into the intake manifold. To avoid these vapours condensing when they enter the intake manifold, the inlet point is surrounded by a ring-shaped electric heater element. Operating period The heater element always operates when “Ignition on”. This is the case when the engine is operating both in winter as well as in summer. Electric circuit J17 N79J17S243 10AN79SP30_11Fuel pump relay Heater element (crankcase breather)12Fuel Injection SystemInjector with air shroudingFuel railInjectorFrom intake manifoldSP30_28Air pipe Fuel feedAn injector is assigned to each cylinder. The four injectors at the top project into the fuel rail and at the bottom into the intake manifold of the engine. The fuel flows through the injectors from the top to the bottom, in the so-called “top feed” method. The mixture formation is improved as a result of the additional air shrouding of the injector. An air pipe is connected to the intake manifold. Each injector is connected, in turn, to the air pipe. As a result of the vacuum in the intake manifold, air is drawn out of the intake manifold and flows through the air pipe to the individual injection nozzles. This interaction between the fuel and the air molecules results in the fuel being extremely finely atomised. The air shrouding is effective primarily in the part throttle range of the engine.Air feed from air pipeAir shroudingSP30_18Advantages: Combustion is improved. Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept liability The pollutants in the exhaust areany reduced.with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�13PistonsGraphite coatingSP30_30Shortened stem Box shapeSP30_33Piston design Use is made of aluminium lightweight pistons. These feature a shortened, graphitecoated stem and bearings for the piston pin which are offset to the inside. This produces the shape of a box. Added to the advantages offered by the lighter-weight design of piston and piston pin is the fact that the piston moves over a relatively narrow friction surface.The shape of the piston necessitates a specific installation position which is marked Protected by copyright. Copying for private or commercial purposes, in part or by in whole, is not permitted unless authorised by ŠKODA AUTO S. ŠKODA AUTO A. piston S. does notcrown guarantee or accept any liability This in turn makes it possible to use a shorter means of an A. arrow on the with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� and thus lighter-weight piston pin. (points toward belt pulley). The piston crown has a combustion chamber recess.14Oil spray nozzle with pressure relief valveSP30_34Piston cooling To intensify the cooling of the piston, a small part of the lube oil in the circuit is branched off and flows to the piston. Each cylinder has its own oil spray nozzle for this purpose, this being bolted to the cylinder block and supplied with oil directly from the oil pump through an oil passage. The oil spray nozzle has a pressure relief valve which opens at a pressure of 0.25 to 0.32 MPa. The lube oil flows into the interior of the Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted piston and cools it. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�15SensorsCamshaft position sensor G40Camshaft position sensor operates on the Hall sensor principle. It is located behind the camshaft drive sprocket. The measuring wheel is attached to the rear of the camshaft drive sprocket.New!Camshaft drive sprocketUse of signal The position of the camshaft is determined by means of the camshaft position sensor. In addition, it acts as a quick-start sensor.Operation and design Two of the measuring windows of the measuring wheel are wide and the other two are narrow. The result of this is to produce a characteristic signal pattern for each 90° revolution of the crankshaft. The engine control unit in this way determines the position of the camshaft and controls the fuel injection and ignition before the engine has completed half a revolution (quick-start sensor). This improves cold starting properties. A reduced level of exhaust emissions is produced during a cold start.Camshaft position sensor Measuring wheel with measuring windowsSP30_21Substitute function and self-diagnosis If the camshaft position sensor fails, the engine continues running, using a substitute signal. The ignition angle is retarded as a safety measure. The sensor is tested in the self-diagnosis.Camshaft position sensorSP30_19Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP30_2016PTFE SealsThe seals of the crankshaft and camshaft are radial seals manufactured from PTFE (polytetra-fluor-ethylene). PTFE is also known by the name Teflon and characterizes a particular type of heatresistant, wear-proof plastic. These seals offer improved sealing functions from the inside and protect the engine from the outside from abrasion and dust. The sealing lip features a return-flow swirl which operates in a particular direction. Ribs on the outer diameter support the seat of the seal in the crankcase. The design and the material of the seal necessitate new tools for reliably installing Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted this new generation of seals, and a modified Ribs on outer diameter unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability removal and installation procedure. with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP30_35Sealing lip with return-flow swirlNote: PTFE seals are installed dry! The sealing studs of the crankshaft/ camshaft must be free of grease. PTFE seals are always installed in a particular direction (right and left seals).Dust lipStud of crankshaftNote also the information in Workshop Manual 2.0-ltr./85 kW Engine, Mechanical Components.SP30_3617Secondary Air System5p6 4p2t°13SP30_01Secondary air system activatedInitial situation In the cold start phase of an engine the pollutant concentrations of uncombusted hydrocarbons are relatively high as the catalytic converter has not yet reached its operating temperature.System design When the engine is started, additional (secondary) air is drawn out of the air filter -1by the secondary air pump -2- and injected directly downstream of the exhaust valves.The system operates as a result of the The purpose of the secondary air system is to interaction of the system components. reduce the emissions during purposes, this in part or in whole, is not permitted Protected bypollutant copyright. Copying for private or commercial unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability – ŠKODA engine control unit -3phase. with respect to the correctness of information in this document. Copyright by AUTO A. S.� – relay for secondary air pump -4Injecting additional (secondary) air into the – secondary air pump -2exhaust gas enriches it with oxygen. The – secondary air injection valve -5result is thermal post-combustion of the – combination valve -6uncombusted elements of carbon monoxide (CO) and hydrocarbon (HC) present in the The input parameters for the engine control exhaust gas. unit are the coolant temperature -t°- and the The heat released as a result of postLambda control -λ-. combustion ensures that the catalytic converter more rapidly reaches its operating temperature.1856 4p2t°1part or in whole, is not permitted 3 Protected by copyright. Copying for private or commercial purposes, in unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�de-energized Secondary air system not activatedSP30_02Description of operation The secondary air system is active only for a limited time and in two operating states: – – cold start engine idling after warm start Voltage is supplied to the secondary air pump -2- through the relay for secondary air pump -4-. The secondary air injection valve -5- is operated in parallel and the combination valve -6- is opened by means of the vacuum “p”. Air is injected for a short time by the secondary air pump into the exhaust flow downstream of the exhaust valves. In the non-activated state, the combination valve shuts off the flow of hot exhaust gases to the secondary air pump. When the system is operating, it is checked by the self-diagnosis. The Lambda control must be active for this purpose because the probe voltage is reduced as a result of the increased oxygen concentration in the exhaust. If the secondary air system is operating properly, the mixture detected at the Lambda probes must be extremely lean.19The system is activated by the engine control unit -3- on the basis of the prevailing operating conditions.StatusCoolant temperature +5°C +5 ... 33°CActivated time not active 100 s 10 sCold startWarm start Idlingup to max. 96°CSecondary Air SystemSecondary injection valve N112 The secondary air injection valve is an electropneumatic valve. It is operated by the Motronic control unit and controls the combination valve. It is linked to the combination valve over a control line. It opens the combination valve by releasing the flow of the intake manifold vacuum. The combination valve is closed by releasing the atmospheric pressure and allowing to flow to the combination valve. The valve is integrated in the self-diagnosis.SP30_06Relay for secondary air pump J299 and secondary air pump V101 The secondary air pump relay J299 which is operated by the Motronic control unit, switches voltage for the motor of the secondary air pump V101. The secondary air pump draws fresh air out of the air filter housing and pumps it through the combination valve to the exhaust valves. The secondary air pump relay is integrated in the self-diagnosis.SP30_07 SP30_09Electric circuit J17 J220 J299 N112 V101 S+30Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Fuel pump relay J17 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability +30A. S.� Motronic control with respect to unit the correctness of information in this document. Copyright by ŠKODA AUTO Secondary air pump relay Secondary air injection valve S162 S243 Secondary air pump motor 50A 10A FuseN112J299V101M3330J2203120SP30_08The combination valve The combination valve is bolted onto the intake manifold support and, together with this, forms the air distribution system. It is a pneumatic valve which is connected – by a pressure hose to the secondary air pump through the intake manifold support by a pressure line to the secondary air port in the exhaust manifold by a vacuum line to the secondary air injection valve N112.From secondary air pumpControl line–To secondary air port–Valve opened The engine control unit has operated the secondary air injection valve.Intake manifold supportSP30_03Vacuum is now active in the control line of the Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability combination valve.with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The air passage is opened from the secondary air pump to the secondary air port. The secondary air pump pumps air as far as the exhaust valves.Fresh air from secondary air pumpVacuum in control line from secondary air injection valveSP30_04Valve closed The engine control unit has not operated the secondary air injection valve. Atmospheric pressure is active through the secondary air injection valve at the combination valve. The air passage from the secondary air pump is shut off. The combination valve shuts off the hot exhaust gases and prevents them flowing to the secondary air pump and damaging the pump.To secondary air port at exhaust valvesAtmospheric pressure of control line from secondary air injection valveSP30_05Exhaust gas21Emission Control SystemTwo-probe Lambda control You will be familiar with the fact that harmful exhaust emissions can be most effectively reduced with a closed-loop exhaust system.Exhaust emissions, probe voltageλ windowNOxConverting the 3 exhaust components of HC, CO and NOx is only possible, however, within a very narrow range, the so-called “Lambda window” (λ = 0,99 ... 1) this being achieved by means of the Lambda control. The Lambda probe measures the residual oxygen concentration in the exhaust.COVoltage curve of λ probeHCA lean mixture (λ 1) produces a probe voltage of approx. 100 mV. 0,9 A rich mixture (λ 1) produces a probe Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted voltage of approx. 800 mV. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�0,951,01,051,1λ Air indexSP30_16Note: λ = indicates the extent which the actual fuel-air mixture differs from the mixture theoretically required.Why a second Lambda probe? Lambda probes are exposed to high levels of pollution in the exhaust. A probe installed downstream of the catalytic converter is less susceptible to pollution. Designing the Lambda control with only one probe downstream of the catalytic converter is not a good solution, however, because of the lengthy gas flow times. The control would react too slowly. The stricter exhaust emission regulations, however, necessitate a Lambda control which operates more rapidly and accurately. That is why a second Lambda probe G130 is positioned downstream of the catalytic converter. It is used for verifying the operation of the catalytic converters. In addition, an adaptation of the upstream Lambda probe (G39) is performed.Catalytic converter Lambda probe G39 upstream of catalytic converterSP30_15Lambda probe G130 downstream of catalytic converterConnections of Lambda probes to electrical system22Engine Catalytic converterInducted airExhaustG28 G70 G39G130FuelUVU G39U G130SP30_17J220G28 G39 G70 G130 UG39 UG130 UVEngine speed sender Lambda probe upstream of catalytic converter Air mass meter Lambda probe downstream of catalytic converter Probe voltage of Lambda probe upstream of catalytic converter Probe voltage of Lambda probe downstream of catalytic converter Control voltage of injectorsThe control of the downstream Lambda probe takes priority over that of the upstream probe. At the same time, the conversion efficiency of the catalytic converter (measure for cleaning efficiency) is checked by the 2nd Lambda probe. The probe voltages UG39/upstream probe and UG130/downstream probe, are compared by the engine control unit. If the ratio varies from the specified figure, the engine control unit detects a malfunction of the catalytic converter. This is stored as a fault in the fault memory. The voltage curves of both probes can be checked as part of the self-diagnosis. Effect in the event of failure – Failure of upstream Lambda probe: no Lambda control. Adaptation inhibited. Emergency running by means of map control. – Failure of downstream Lambda probe: Lambda control continues operating. Operation of catalytic converter can be checked, however.The signals regarding air mass and engine speed are the basis for the fuel injection signal (Uv) which is generated by the engine control unit. The engine control unit calculates from the signal supplied by the Lambda probe, the additional correction factor for the injection time (extending or reducing). for the Lambda control). The control cycle is thus stabilised as a result of the constant data interchange.In addition, the Lambda map in which various operating states are specified (e.g. cold, warm, Lambda pre-control when engine off) is stored in the control unit. The shift of the Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted voltage curve is corrected within a defined unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� frame (adaptation) with the aid of a second control loop, which ensures a stable mixture composition over the long term.23Exhaust Gas Monitoring System OBD IIAir pollution resulting from the exhaust gases emitted by vehicles is a worldwide phenomenon. Legislative standards have obliged manufacturers to minimize exhaust emissions. The California Air Resources Board (CARB) in the USA has played a leading role in exhaust emission legislation. Even if national legislation today in some cases still lays down different limits, the trend is clearly toward implementing the strict exhaust emission limits applicable in the USA. The stricter emission standards for achieving clean air necessitate ensuring that all the system components which have an impact on exhaust emissions, are operating properly.Exhaust emission limits100 % 80 % 60 % 40 % 20 % 0% 1975 1980 1985 1990 1995 2000 YearSP30_26CO NOx HCDevelopment of pollutant emissions in the State of CaliforniaMalfunctions and faulty components in the engine management system can result in a considerable increase in pollutant emissions. The OBD (On-Board Diagnosis) has been introduced to avoid such situations. This is in effect a diagnosis system which is integrated in the engine management system of a vehicle and constantly monitors all exhaust-relevant components.. The Motronic 5.9.2 of a 2.0-ltr. engine complies with these requirements.OBD On-Board DiagnoseThe driver is informed of faults in components which affect exhaust emissions by means of a warning lamp (exhaust gas warning lamp Protected by copyright. Copying for private or commercial purposes, in part .2or in whole, is not permitted 5.9 ic unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability n K83). o r t o Mwith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP30_2724The readiness code The readiness code is an 8-digit numerical code which indicates the status of the diagnoses of relevance for exhaust emissions. The diagnoses are performed at regular intervals if the vehicle is driven in normal conditions. The readiness code does not provide any information regarding whether faults are present in the system. It states merely whether certain diagnoses have been completed -0- or have not been carried out or have been aborted -1-. If the engine management system has detected a fault and stored this in the fault memory, the fault can be determined by reading the fault memory with a fault reader.1 4 7 C O 8 Q 52 6 93HELPV.A.G. 1552202_CZ_002 SP17-29Note: The readiness code can be read with the V.A.G You can find information on how the diagnosis testers by means of address word readiness code is generated and how “01” in function “15” and also by starting a short it is read in Workshop Manual 2.0-ltr./ test. 85 kW Engine Motronic Fuel Injection Use the current software status, Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted and Ignition System. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability 5 or higher for V.A.G 1552, with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� 8 or higher for V.A.G 1551.Meaning of the 8-digit numerical block for the readiness codeThe readiness code is generated only if all the places indicate 0.12345678 0 Catalytic converterDiagnosis function0Catalytic converter heater (at present no diagnosis/always “0”)0Activated charcoal filter system (fuel tank vent system)0Secondary air system0Air conditioning (at present no diagnosis/always “0”)0Lambda probes0Lambda probe heater (at present no diagnosis/always “0”)0Exhaust gas recirculation (not present/always “0”)25Exhaust Gas Monitoring System OBD IIExhaust gas warning lamp K83Function The warning lamp indicates that the exhaust monitoring system has detected a malfunction of relevance for the exhaust emissions. The warning lamp is integrated in the instrument panel. Like all the warning/indicator lamps, it comes on for a few seconds when the ignition is switched on. If it does not go out after the engine has started, or comes on or flashes when driving, this indicates that there is a fault in the engine electronic systems or in the system components of relevance for exhaust emissions. – Flashing: A fault is present which causes damage to the catalytic converter in this driving state. The car should continue to be driven only at reduced engine output. Continuous light: A fault is present which adversely affects Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted emission levels.unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�3 2 1 41/min x 10005 6 760 40 2080100120km/h140 160 180 200 220 240SP30_46–An exclamation mark is an indication to the driver to contact a Skoda workshop for professional advice.SP28_04Note: The warning lamp is known as an MIL - this being an acronym for Malfunction Indicator Light.J28532K83Electric circuit The warning light is linked directly to the engine control unit. It is stored in the fault memory.17J220SP30_4726Function DiagramLegend of function diagram of page 28 The function diagram represents a simplified current flow diagram. Components A D E45 F F36 F47 Battery Ignition/starter switch Cruise control system switch Brake light switch It shows all the connections of the Motronic Clutch pedal switch 5.9.2 engine management system for the Brake pedal switch for cruise 2.0-ltr./85 kW engine. control system F60 Idling speed switch G6 Fuel pump G28 Engine speed sender Additional signals G39 Lambda probe (upstream of catalytic converter) 1 AC compressor on/off G40 Camshaft position sensor G42 Intake air temperature sender 2 AC readiness (in) G61 Knock sensor I G62 Coolant temperature sender 3 Road speed signal G66 Knock sensor II G69 Throttle valve potentiometer 4 Fuel consumption signal G70 Air mass meter G88 Throttle valve positioner 5 Driver door rotary tumbler switch potentiometer G130 Lambda probe 6 Airbag (downstream of catalytic converter) J17 Fuel pump relay J220 Motronic control unit J299 Secondary air pump relay Colour coding/Legend J338 Throttle valve control unit K83 Exhaust gas warning lamp N Ignition coil = Input signal N30 ... 33 Injectors N79 Heater element = Output signal (crankcase breather) N80 Activated charcoal filter system = Battery positive solenoid valve N112 Secondary air injection valve = Earth N122 Power output stage N128 Ignition coil 2 = Bi-directional P Spark plug connector Q Spark plugs = Diagnosis connection S Fuse ST Fuse carrier V60 Throttle valve positioner Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted V101 Secondary air pump motor unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the Z19 correctness of information in this probe document. heater Copyright by ŠKODA AUTO A. S.� Lambda (upstream of catalytic converter) Z29 Lambda probe heater (downstream of catalytic converter)27Function Diagram172116231920242218J17 4S163 50A STS228 15AS232 10A5D6S243 10AS162 50A STZ19G39 Z29G130 N80G42/G70N112λN30 + 73 A 66 59 69 74 75 62 76 19 80 58 65 04 27 25 26 N31 N32 N33λ28 51 52154014 11 12 1333J220 17 41 29 56 63-Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�M V60 F60 G88 J338 G69+K83CAN - BUS +CAN - BUS-G40G28MG631For designation of components refer to page 27.28D/+15+30D/+30S243 10A E45 31S5 7,5AS13 10AS10 10AS29 15AF47 J299 V101 4MFN79F363046 3635 34484703016068081020185367 027178N1221G66 G61234G62N N128IIVIIIIIQ P31inoutAdditional element of cruise control system,Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted ready for use unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP30_1029Self-DiagnosisThe control unit of the Motronic 5.9.2 is equipped with a fault memory. All the colour-coded parts of the system are monitored by the self-diagnosis. The self-diagnosis can be performed with the vehicle system tester V.A.G 1552, the fault reader V.A.G 1551 or with the vehicle diagnosis, measurement and information system VAS 5051. It is initiated by entering the address word 01 – Engine electronics. The following functions are possible: 01 02 03 04 05 06 07 08 10 11 15 Interrogating control unit version Interrogating fault memory Final control diagnosis Basic setting Erasing fault memory Ending output Coding control unit Reading measured value block Adaptation Login procedure Reading readiness codeCAN-Bus -CAN-Bus +SP30_29Note: Function 04 - Basic setting - has to be performed after replacing the engine control unit, the throttle valve control unit or the engine, and after disconnecting the battery. Protected by copyright. Copying for private commercial purposes, in part or in whole, is not permitted Advise your customer toor have the unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability basic setting carried out in a workshop with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� 202_CZ_002 after the customer has replaced the SP17-29 battery or has disconnected and reconnected the battery. You can find the individual fault codes in the Workshop Manual 2.0-ltr./85 kW Engine Motronic Fuel Injection and Ignition System.1 2 3 4 5 6 7 8 9 C O QHELPV.A.G. 155230Further Development of the 88 kW EngineThe further development of the 88 kW version of the 2.0-ltr. engine features the following characteristic modifications – – – – camshaft adjustment (inlet cams) electric throttle operation variable intake manifold secondary air system operates without secondary air injection valve. Note: On the basis of this operating principle, this engine is also known as the “Flino engine”.The camshaft adjustment is described below. The function of the electric throttle control is explained in SSP 27. Technical data Output: 88 kW Torque: 175 Nm Compression ratio: 10 : 1 Fuel: RON 95 unleaded Homologation conforming to EU IV.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�31Further Development of the 88 kW EngineCamshaft adjustmentThe adjustment of the camshaft operates mechanically with “floating” inlet cams. This camshaft - known by the acronym FliNo is a camshaft which permits inlet closing in line with engine speed. Advantages: Higher torque curve over the entire engine speed range. Improvement in fuel consumption and improvement in elasticity.Rotation angle Direction of rotation Roller Variable inlet camNew!Oil cushionOil drilling Camshaft base bodySP30_3750 40Inlet closes (degree crankshaft after BDC)30 20 10 0 -10 -20 1000 2000 3000 4000 5000 6000Inlet closes position as a function of engine speedfixed camshaft adjustable camshaftSP30_38Function Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted The opening process at the inlet valve does not differ from that of a fixed camshaft. During the closing operation, however, the cam rotates when subjected to the spring force of the valve spring.unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The rotation angle of the inlet cam depends on the engine speed. At low revs, it is greater than at high engine revs.32Base body Parallel key RollerParallel key Bush Inlet cam Bush Spring Exhaust cam Bush Inlet cam Exhaust camSP30_39Function Camshaft85 kW engine Shaft, inlet cam and exhaust cam are a single part88 kW engineunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Base body with oil drilling lengthwise and transverse to inlet cam. Exhaust cam with parallel key permanently connected to base body. Inlet cam pivots on base body. An integral roller acts as a driver for the cam and limits the rotation angle. The space in the cam above the base body is pressurized by oil pressure. The oil cushion absorbs Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted the rotary movement and minimizes noises.AdjustmentNoneThe inlet cam rotates in line with the engine speed. It rotates in the direction of rotation of the camshaft as a result of the force of the valve spring, but faster than the camshaft itself would rotate. The cam “flies” ahead of the camshaft.TimingFixed timing for exhaust valve and inlet valveExhaust valve fixed timing. Inlet valve fixed timing for start of opening, variable timing for end of opening.33Test Your KnowledgeWhich answers are correct? Sometimes only one. But perhaps also more than one - or all! Please complete the blank spaces.1.The position of the camshaft is indicated by the camshaft position sensor G40. It has A. B. C. a measuring window of the same width for each cylinder, four different measuring windows, two narrow and two wide measuring windows,?as a result of which a characteristic signal is generated in each case for each 90° rotation of the crankshaft.2.The injectors are A. B. C.identical to those of the 1.6-ltr. and 1.8-ltr. engines. additionally equipped with an air shrouding. designed to operate with the so-called “top feed” method.3.The crankcase is provided with a breather for compensating for the pressure differences. The mixture of gas and oil vapour is fed back …………………………. To avoid condensation at the inlet, the inlet point is heated. It is heated A. B. C. constantly when the engine operates in winter. constantly when the engine is switched on. during the starting operation, in the same way as the diesel preglow system.4.Injecting additional (secondary) air into the exhaust gases results in post-combustion of the pollutants contained in the exhaust. This ensures that A. B. C. the catalytic converter heats up more rapidly to its operating temperature. the pollutant concentrations of CO and HC are reduced. the engine operates with an air excess.34?Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�5.The secondary air system is A. B. C. constantly active. only active during a cold start. active during a cold start and when engine idling after a warm start.6.The combination valve in the secondary air system A. B. C.is an electro-pneumatic valve operated by the engine control unit. is a pneumatic valve controlled by means of a vacuum. is a pneumatic valve which is operated by means of a separate electro-pneumatic valve.7.The two-probe Lambda control A. B. C.ensures rapid and accurate Lambda control. verifies the conversion efficiency of the catalytic converter. detects a malfunction of the catalytic converter by comparing the probe voltages with a specified voltage.8.The readiness code A. B. C.indicates that diagnoses are performed for ensuring exhaust emission-compatible operation. indicates faults in the emission control systems. can be generated and read.9.The new Motronic 5.9.2 is a generation of engine control units which features A. B. C. technical improvements regarding starting of engine, improved fuel consumption and reduction of exhaust emissions. technical control systems for stabilising the temperature of the inducted air. compliance with the requirements regarding OBD II.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�1. C.; 2. B., C.; 3. into the intake manifold, B.; 4. A., B.; 5. C.; 6. C.; 7. A., B., C.; 8. A., C.; 9. A., C Answers35?