VAN DER VEER ENGINEERING / NETHERLANDS

One engineer.

A connected approach.

From electronic design to embedded software and vehicle wiring. I develop the connections that bring your build together.

Product development

Embedded software

Vehicle integration

AT THE DESK / ORIGINAL DEVELOPMENT PHOTO

•   Independent development

•   Personal contact

•   Based in the Netherlands

ONE ENGINEER / THE WHOLE PICTURE

A personal approach
to automotive electronics.

I’m Jeroen van der Veer, the independent hardware and software developer behind Van der Veer Engineering. My focus is automotive control systems, embedded firmware and CANbus communication.

I develop and test each product myself, from circuit and PCB design to firmware, CAN protocols and refinement. Working across both hardware and software helps me understand how the electronics behave as a complete system.

I run a small, independent engineering business and work with specialist companies where their expertise adds value. When you get in touch, you speak directly with the person developing the product.

Jeroen van der Veer

Jeroen van der Veer

Independent hardware & software developer

Zoelmond, the Netherlands

WHAT I DEVELOP

Product development

Automotive controllers, electronic hardware and PCB design.

Embedded software

Firmware, control logic and product configuration software.

Vehicle integration

CANbus communication, wiring and drivetrain electronics.

I like understanding how things work — and making different systems work together.

Jeroen van der Veer

HOW IT STARTED

From a hobby
to my everyday work.

An education in electronics and a passion for cars gave me the starting point. Turning those interests into my own controllers and interfaces gradually made the hobby my everyday work.

Today, real builds keep that work moving forward. Each integration challenge is a chance to improve how the hardware, software and vehicle systems work together.

DEVELOPMENT / FROM DESK TO VEHICLE

Every connection
has a purpose.

Hardware and software are developed as parts of one system — with practical vehicle integration in view.

CAN converter installation in the Golf 7R R36 and DSG swap

REAL PROJECT / GOLF 7R · R36 + DSG

HANDS-ON VEHICLE INTEGRATION

Built with the
vehicle in mind.

CANbus systems & vehicle integration

Modern vehicles rely on electronic modules sharing information over CANbus networks. In an engine or drivetrain swap, components from different platforms may expect different messages and cannot always communicate directly.

I develop interfaces that translate those messages and controllers that manage supported drivetrain functions, alongside the wiring needed to connect them. The aim is to make complex conversions easier to integrate and use.

CANbus converters

Drivetrain control modules

Engine-swap wiring harnesses

Embedded firmware

Vehicle electronics integration

Plug-and-play controllers

View all projects →

PROJECTS / PRACTICAL EXPERIENCE

Built around real challenges.

Different vehicles and different components. The same need to make the electronics work together.

View photo ↗

Golf 7R · R36 + DSG

Full engine and DSG swap, with CANbus integration.

View photo ↗

Audi S1 · DAZA

Engine-swap project using CAN Convertor MQB–PQ.

View photo ↗

Golf Mk2 · R36 4Motion

R36, DSG and Haldex AWD conversion project.

DIRECT CONTACT / TECHNICAL UNDERSTANDING

Have a question about your build?

Tell me about your vehicle, the components you are using and what you want to achieve.