Haldex Controller Gen5 0CQ/0AY Plug-and-Play Wiring Harness

€ 75,00 excl. tax

Replacement plug-and-play wiring harness for the VE Haldex Controller Gen5 0CQ (MQB) and Gen5 0AY (PQ).
Ideal for replacing damaged wiring or transferring your existing controller to another compatible vehicle. Connects inline with the original Haldex wiring without cutting or modifying factory wires.
Suitable for compatible Gen5 vehicles, including the Volkswagen Golf Mk7 R, Audi S3 8V, Audi S1 8X and other supported 0CQ/0AY installations.

SKU: HDC-LOOM-PNP-G5 Category: Tags: ,
Brand: VAG
Haldex Type: Gen5 0CQ
Wiring loom: Plug and Play
VE Haldex Controller Gen5 Plug and Play - wiring harness

Haldex Controller Gen5 0CQ/0AY Plug-and-Play Wiring Harness

€ 75,00 excl. tax

In stock

Description

Haldex Controller Gen5 0CQ/0AY Plug-and-Play Wiring Harness

This replacement plug-and-play wiring harness is designed for the VE Haldex Controller Gen5, supporting compatible 0CQ (MQB) and 0AY (PQ) Haldex all-wheel-drive installations.

The harness connects inline with the original Haldex wiring, allowing the VE Haldex Controller to be installed without cutting, soldering or modifying the factory wiring.

Whether you’re replacing a damaged wiring loom or transferring your existing VE Haldex Controller to another compatible vehicle, this harness provides a convenient installation solution while retaining the original Haldex electronics.

Key Features

  • Plug-and-Play Installation: Connects directly to compatible factory Haldex wiring using matching connectors.
  • Gen5 0CQ and 0AY Support: Suitable for supported Gen5 MQB and PQ installations.
  • No Factory Wiring Modifications: No cutting, soldering or splicing of original vehicle wiring required.
  • Replacement or Transfer: Ideal for replacing damaged wiring or moving an existing controller to another compatible vehicle.
  • Original Haldex System Retained: The factory Haldex control module remains installed and connected.
  • Easy Removal: The harness can be disconnected without permanently modifying the vehicle wiring.

Vehicle Compatibility

This wiring harness is suitable for compatible Volkswagen, Audi, SEAT and Škoda vehicles equipped with a Gen5 Haldex system and the appropriate plug-and-play connection.

Gen5 0CQ (MQB)

Common compatible applications include:

  • Volkswagen Golf Mk7 R / 4Motion
  • Volkswagen Passat B8 4Motion
  • Volkswagen Arteon 4Motion
  • Audi A3 / S3 / RS3 8V Quattro
  • Audi TT / TTS / TT RS 8S Quattro
  • Škoda Octavia Mk3 4×4
  • Other compatible Gen5 0CQ installations

Gen5 0AY (PQ)

Common compatible applications include:

  • Audi A1 / S1 8X Quattro
  • Volkswagen Tiguan 5N, later Gen5 versions
  • Volkswagen Caddy 2K 4Motion, later Gen5 versions
  • Škoda Yeti 5L 4×4, later Gen5 versions
  • Other compatible Gen5 0AY installations

Important compatibility information:

  • Gen5 0CQ and Gen5 0AY use different VE Haldex Controller versions. Select the correct controller for your vehicle.
  • Some vehicles equipped with an 0AY Haldex assembly use a Gen4 system rather than Gen5.
  • Volkswagen Transporter T6 and T6.1 installations require vehicle-specific plug-and-play wiring harnesses.
  • Compatibility depends on the actual Haldex generation, wiring connector and vehicle configuration, not just the model year.

Check the Haldex Controller Compatibility List before ordering.

Installation

The harness connects inline with the original vehicle Haldex wiring and provides the additional connection for the VE Haldex Controller.

On supported vehicles such as the Volkswagen Golf Mk7 R, the factory Haldex connection is accessible beneath the rear seat.

  1. Locate the original Haldex wiring connection.
  2. Disconnect the factory connector.
  3. Insert the plug-and-play harness between the original connectors.
  4. Route the additional wiring to the controller mounting location.
  5. Connect the VE Haldex Controller and secure the wiring.

The factory wiring remains intact.

Connector locations and installation procedures may differ depending on the vehicle.

For detailed instructions and installation photos, see the Gen5 Plug-and-Play Installation Guide.

Looking for the Complete Gen5 Plug-and-Play Kit?

This product includes only the replacement wiring harness and does not include the VE Haldex Controller.

If you don’t already have a controller, complete plug-and-play kits are available for both Gen5 systems. Each kit includes the appropriate VE Haldex Controller and installation wiring harness.

Gen5 0CQ (MQB) – Complete Kit

For compatible MQB vehicles such as the Volkswagen Golf Mk7 R, Audi S3 8V and TT RS 8S.

View Haldex Controller Gen5 0CQ Plug-and-Play Kit

Gen5 0AY (PQ) – Complete Kit

For compatible PQ vehicles such as the Audi S1 8X, Volkswagen Tiguan and Škoda Yeti with Gen5 0AY Haldex.

View Haldex Controller Gen5 0AY Plug-and-Play Kit

What’s Included?

  • 1× VE Haldex Controller Gen5 0CQ/0AY Plug-and-Play Wiring Harness

Please note:

  • The VE Haldex Controller is not included.
  • This is a replacement wiring harness, not a complete controller kit.
  • Only suitable for compatible Gen5 0CQ/0AY plug-and-play installations.
  • Other Haldex generations and certain vehicle-specific installations require a different wiring harness.

Additional information

Weight 0,5 kg
Brand

VAG

Haldex Type

Gen5 0CQ, Gen5 0AY

Wiring loom

Plug and Play

Reviews

There are no reviews yet.


Be the first to review “Haldex Controller Gen5 0CQ/0AY Plug-and-Play Wiring Harness”

Related Products

FEATURED PRODUCTS

BEST SELLING PRODUCTS

LATEST PRODUCTS

TOP RATED PRODUCTS