TECHNICAL DOCUMENTATION

SSP 046 Škoda Superb Presentation of the vehicle part I

PDFEN38 pages11 MB
SSP 046 Škoda Superb Presentation of the vehicle part I - PDF cover

This PDF is currently unavailable.

Read document text
Škoda - a name with a commitment!ŠkodaFabia The car radiates dynamism which is accentuated by the characteristic of the front section. This is underscored by the brand-typical radiator grille with the wide chrome surround and large dominant Škodalogo. The tight panel gaps between the individual parts of the body not only make the car look good, but are visible proof of the high precision in production and contribute to a reduction in the aerodynamic drag and the aerodynamic noise level.SP46_01ŠkodaOctavia The ŠkodaOctavia RS was, up until now, the most powerful and also the fastest standardproduction car in the entire history of ŠkodaAuto. The model designation RS (Racing Sport) is a reminder of the famous sports tradition of the brand. The dynamic ŠkodaOctavia RS offers outstanding performance and, at the same time, is also a family car which satisfies all the requirements which are made in respect of the car for day-to-day living.SP46_02ŠkodaSuperb The Škoda brand is able to look back today on a tradition of more than one hundred years in automobile production. Part of this tradition right into the 40s of the last century were the luxury class cars which achieve worldwide recognition. The top models of the brand bore the harmonious name Superb from the mid-30s. The new ŠkodaSuperb now links once again to this tradition. The car supplements the previous range of products comprising the successful model series ŠkodaFabia and ŠkodaOctavia at the top of the range by introducing a further, even more powerful model Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted series. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP46_03The new model ŠkodaSuperb is manufactured at the Škoda Plant at Kvasiny.2GB ContentsŠkoda Plant at Kvasiny ŠkodaSuperb - Brief presentation of the vehicle Engine/Gearbox Combinations Engines Gearboxes Body SafetyProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�4 6 8 10 16 21 22Running Gear unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability23 Electrics Climatronic Dimensions Details Notes 24 35 36 38 39Servicexxxxxxxxxxxxxxxx SUPERBServicexxxxxxxxxxxxxxxx SUPERBServicexxxxxxxxxxxxxxxx SUPERBService Servicexxxxxxxxxxxxxxxx SUPERB xxxxxxxxxxxxxxxx SUPERBService Servicexxxxxxxxxxxxxxxx SUPERB xxxxxxxxxxxxxxxx SUPERBS e r v i c eXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX XXXXXXXXYou can find information regarding inspection and maintenance, setting and repair instructions in the Workshop Manuals.GB3 Škoda Plant at KvasinySP46_04Historical background The history of the automobile plant at Kvasiny extends back into the 20s of the past century when Dipl.-Ing. František Janeček began the production of body parts in a former sawmill, a former cooper's workshop and brickmaking plant. Production developed well and it was hear in the year 1934 that production of bodies for JAWA 700 began, under licence from the German company DKW (The name JAWA originated from the family name Janeček and Wanderer).Škoda Plant at Kvasiny 2001Production was enlarged in the year 1936 to include the manufacture of paints and varnishes. The next success did not take long in coming. It was in 1938 in the form of a car which was an in-house construction with the name JAWA. It was called the JAWA Minor I and had a cubic capacity of 600 cm3. This car was also presented as a convertible with a soft top, as a Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted sporty two-seater roadster and as a sedan in AUTO A. S. does not guarantee or accept any liability unless authorised by ŠKODA AUTO A. S. ŠKODA with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� different versions. Even about 400 units of the military version of this car were also produced.SP46_054GB During the Second World War production was adapted to the needs of the armaments industry. The paint and varnish production was maintained. The result of the strategic negotiations with Škoda AZNP* Mladá Boleslav, which had commenced two years prior to the end of the war, was an agreement relating to the manufacture of cars of the Škoda brand. The result of this agreement was, for example, the Škoda 1200 model range which was available as a sedan, and also as a rescue vehicle and hearse. The company became the manufacturer of special replacement parts for the body. During the period of the 50s and 60s the Škoda plant at Kvasiny became familiar from the production of the Škoda 450 Felicia and Škoda 445 Octavia Estate models. All in all more than 65 000 of these cars were manufactured. It was in particular the sporty Felicia which was a successful export product. Its successful design was regarded as one of the most attractive Škoda cars of the post-war period.JAWA Minor ISP46_06Škoda 450 FeliciaThe plant was enlarged in the 60s and 70s which made it possible to incorporate the standard production of the popular Škoda 110 R Coupé. This was followed by the model series of the Škoda 105, 120 and 130. The sporty versions, the Škoda 120 Garde and Škoda 130 Rapid Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted were added to this model line at a later date. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability The production of this model ended in the with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� early nineties. It was in 1995 that production of the modernised model range ŠkodaFelicia in the versions Felicia Pickup, VW Caddy and VanPlus commenced. The new model, the ŠkodaSuperb, has been produced here since 2001.SP46_07*AZNP = Automobilové závody, národni podnik = (Automobile Plants, State-owned company)GB5 ŠkodaSuperbBrief presentation of the vehicleSP46_126 different engines are envisaged for useSP46_43Bi-xenon headlights with integrated cleaning systemProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP46_31SP46_30Automatic dimming interior rear-view mirrorFour-link front suspension6GB Exterior mirror with entrance lightingSP46_59SP46_27 SP46_28Enhanced passenger safety as a result of head airbagsSP46_33Rear suspension - torsion beam Automatic Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee oranti-roll accept any liability axle with bar transmission - Tiptronic with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP46_34GB7 Engine/Gearbox CombinationsEngine code Displacement Power output Engine management system Emission standard AZM 2.0-ltr. 85 kW Simos 3.2 EU4 AWT 1.8-ltr. 110 kW Bosch Motronic ME7.5 EU4 AMX 2.8-ltr. 142 kW Bosch Motronic ME7.1 EU4SP46_09SP46_08SP46_12standard optionalProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Note: This provides an overview of the engine/gearbox combinations at start of production.SP46_115-speed manual gearbox 01W/0128GB AVB 1.9-ltr. 74 kW TDI unit injection EU3AWX 1.9-ltr. 96 kW TDI unit injection EU3AYM 2.5-ltr. 114 kW TDI EU3SP46_14 SP46_13 SP46_13Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP46_16 SP46_156-speed manual gearbox 01EAutomatic gearbox 01VGB9 Engines2.0-ltr./85 kW - AZMEngine mechanical components The engine is derived from the already familiar transversely-mounted engine of the ŠkodaOctavia. – – – – – – – –SP46_09Installed transversely Cross-flow cylinder head with swirl port and power-optimised inlet port Two-section aluminium intake manifold Phase recognition by means of Hall sender at camshaft Rotorless high-voltage ignition distribution with 2 twin-spark ignition coils Air-enveloped injectors Secondary air injection system Electronic power control; any faults are indicated by the EPC lamp150500Specifications AZM Inline engine 4 2 10.3 : 1 1984 cm3 82.5 mm 92.8 mm 85 kW at 5400 rpm 172 Nm at 3500 rpm Simos 3.2 Electronic injection system Unleaded petrol 95 RON (91 RON possible, with reduction in output) EU41351201059075 P (kW)60Engine code: Type: No. of cylinders: 400 Valves per cylinder: Compression ratio: 350 Displacement: Protected by copyright. Copying for private or commercial purposes, in Bore: part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A.300 S. does not guarantee or accept any liability Stroke: with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Max. output: 250 Max. torque: Engine management system: 200 Mixture formation:450 150 M (Nm)45Fuel:301001550Emission standard:01000200030004000500060007000n (min –1 )SP46_1810GB 1.8-ltr./110 kW - AWTEngine mechanical components The engine is derived from the already familiar transversely-mounted engine of the ŠkodaOctavia. Installed transversely 5-valve technology Double overhead camshafts (DOHC) Camshaft adjuster - chain adjuster only inlet camshaft – Piston crown cooling by oil spray nozzles – Turbocharger with charge pressure control (charge pressure sender, turbocharger changeover valve) – Charge air cooler – Crankcase ventilation by means of pressure control valve – Oil pump chain-driven SP46_08 – Coolant pump driven by toothed belt – Lambda probe upstream of cat (broadband probe) – Single ignition coil with power output stage – Secondary air injection system Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted – AUTO Electronic power control; any faults are unless authorised by ŠKODA AUTO A. S. ŠKODA A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by Š KODAlamp AUTO A. S.� indicated by the EPC150 500– – – –Specifications Engine code: Type: No. of cylinders: Valves per cylinder: Compression ratio: Displacement: Bore: Stroke: Max. output: Max. torque: Engine management system: Mixture formation: Fuel: AWT Inline engine 4 5 9.5 : 1 1781 cm3 81.0 mm 86.4 mm 110 kW at 5700 rpm 210 Nm at 1750 - 4600 rpm Bosch Motronic ME7.5 Electronic injection system Unleaded petrol 95 RON (91 RON possible, with reduction in output) EU41354501204001053509030075250P (kW)6020045150301001550M (Nm)Emission standard:0 1000 2000 3000 4000 5000 6000 7000 n (min –1 )SP46_17GB11 Engines2.8-ltr./142 kW - AMXEngine mechanical components – – – – – – – – – – Installed transversely V6 engine with 5-valve technology Double overhead camshafts (DOHC), inlet camshaft with hydraulic adjustment Electronic fuel injection system with integrated mapped ignition Cylinder-selective knock control Maintenance-free ignition system with rotorless high-voltage ignition distribution Variable intake manifold 2 lambda probes upstream of cat, 2 lambda probes downstream of cat Secondary air injection system Electronic power control; any faults are indicated by the EPC lampSP46_12150500Specifications Engine code: Type: No. of cylinders: Valves per cylinder: Compression ratio: Displacement: Bore: Stroke: Max. output: Max. torque: Engine management system: Mixture formation: Fuel: AMX V engine 6 5 10.6 : 1 2771 cm3 82.5 mm 86.4 mm 142 kW at 6000 rpm 280 Nm at 3200 rpm Bosch Motronic ME7.1 Electronic injection system Unleaded petrol 98 RON (95 RON possible, with reduction in output) EU41354501204001053509030075250P (kW)6020045150301001550M (Nm)Emission standard:01000200030004000500060007000n (min –1 )SP46_2012Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB 1.9-ltr./74 kW - AVBEngine mechanical components The engine is derived from the already familiar transversely-mounted engine of the ŠkodaFabia. – – – – – – Installed transversely With unit injection system Bucket tappets with hydraulic valve clearance compensation Turbocharger with charge pressure control Charge air cooler Electronic power control; any faults are indicated by the glow period warning lampProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability SP46_13 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�150500Specifications Engine code: Type: No. of cylinders: Valves per cylinder: Compression ratio: Displacement: Bore: Stroke: Max. output: Max. torque: Engine management system: Mixture formation: Fuel: AVB Inline engine 4 2 19 : 1 1896 cm3 79.5 mm 95.5 mm 74 kW at 4000 rpm 250 Nm at 1900 rpm Bosch EDC 15P Direct injection with unit injection system Diesel 49 CN, biodiesel EU31354501204001053509030075250602004515030100M (Nm)P (kW)Emission standard:155001000200030004000500060007000n (min –1 )SP46_21GB13 Engines1.9-ltr./96 kW - AWXEngine mechanical components – – – Installed transversely With unit injection system In comparison to the 1.9-ltr./74 kW engine • software in engine control unit matched to higher engine power output • injection nozzles have larger nozzle holes • turbocharger is dimensioned larger • crankcase and conrods are manufactured of a higher-strength material • diameter of conrod bearing on crankshaft is increased Electronic power control; any faults are indicated by the glow period warning lamp–SP46_13150500Specifications Engine code: Type: No. of cylinders: Valves per cylinder: Compression ratio: Displacement: Bore: Stroke: Max. output: Max. torque: Engine management AWX Inline engine 4 2 19 : 1 1896 cm3 79.5 mm 95.5 mm 96 kW at 4000 rpm 285 Nm at 1750 - 2500 rpm1354501204001053509030075250P (kW)6020045Bosch EDC Protected by copyright. Copyingsystem: for private or commercial purposes, in part or in whole, is not15P permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability Mixture formation: Direct injection with 150 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�100M (Nm)30Fuel: Emission standard:1550unit injection system Diesel 49 CN, biodiesel EU301000200030004000500060007000n (min –1 )SP46_2214GB 2.5-ltr./114 kW - AYMEngine mechanical components – – Installed transversely V6 engine with 4-valve technology, camshaft drag levers with valve clearance compensation elements With balance shaft (prevents engine wobble) Radial piston distributor injection pump Turbocharger with charge pressure control Charge air cooler Exhaust gas recirculation Electronic power control; any faults are indicated by the glow period warning lamp– – – – – –SP46_14150500Specifications Engine code: Type: No. of cylinders: Valves per cylinder: Compression ratio: Displacement: Bore: Stroke: Max. output: Max. torque: AYM V engine 6 4 18.5 : 1 2496 cm3 78.3 mm 86.4 mm 114 kW at 4000 rpm 310 Nm at 1400 - 3500 rpm1354501204001053509030075250P (kW)6045200 by copyright. Engine management Protected Copying for private or commercial purposes, in part or in whole, is not permitted unless authorisedsystem: by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability Bosch EDC 14M with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Mixture formation: Direct injection with 150M (Nm)301001550Fuel: Emission standard:electronically controlled distributor injection pump Diesel 49 CN, biodiesel EU301000200030004000500060007000n (min –1 )SP46_23GB15 Gearboxes5-speed manual gearbox 01W/012Technical highlights – – – Installed transversely Two-section aluminium or magnesium housing The input shaft is mounted in the gearbox in 3 bearings and in the crankshaft in 1 bearing Shift rods mounted in ball sleeves produce improved shifting performance Flange shafts mounted in polygon bearings (needle bearings) reduce throbbing noises in the area of the differential– –SP46_11Shift gearSliding sleeve Synchroniser ringSynchromesh The lock synchromesh is a new design in the form of an external synchromesh. – Synchroniser ring with external tapered friction surface – Sliding sleeve with internal taper This results in a larger friction surface.SP46_46Input shaftOil gallery unless authorised by ŠKODA AUTO A. S. Š KODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Longitudinal compensation of drive pinion bearing Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted – A thrust plate and a pretensioned rubber plate are installed behind the outer race and the shim of the tapered roller bearing. This makes it possible to maintain the set bearing pretension within the tolerance irrespective of the thermal expansion of the gearbox housing. – The shift gears and the input shaft are lubricated by means of an oil drip pan through which oil is transported into the hollowdrilled input shaft. – At the same time the rear needle bearing of the input shaft and the rear tapered roller bearing of the drive pinion are supplied with oil through the oil galleries.Oil drip panShimPretensioned rubber plateSP46_47Drive pinion 16Thrust plateGB Indication of vehicle speedReed contacts closed Reed contacts openedSpeedometer senderSpeedometer drive gearProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP46_24SP46_25Reed contacts closedReed contacts openedThere are two Reed contacts (tongue contacts) integrated in the speedometer sender G22. They are enclosed in a moulded plastic tube, filled with inert gas, as a protection against impurities, moisture and corrosion. The contacts are closed and opened by means of magnetic force. Four permanent magnets, distributed around the circumference, are cast in the drive gear of the speedometer.When the drive gear rotates, changes to the magnetic field cause the Reed contacts to open and close. The signal from the speedometer sender passes to the control unit with display unit in the dash panel insert J285. It is conditioned here for displaying the vehicle speed and distance.GB17 GearboxesGearbox housingReverse lockLocking elementReverse lockStopThe reverse lock prevents the gearbox from being shifted through from 5th into reverse. It is installed as a complete assembly and does not required to be set. This is how it operates If an attempt is made to shift out of the 5th gear position into reverse gear, the relay shaft with its stop strikes against the locking element of the reverse gear lock and thus prevents the gearbox shifting through into reverse. It is always possible to engage reverse gear only from the Neutral position. The locking element of the reverse gear lock is then pushed against the spring force into the gearbox housing as a result of the axial movement of the relay shaft and the passage is free for the shift finger to move into the shift rod for reverse gear.Relay shaftDouble shift cam on relay shaftSP46_56Multifunction switch Gearbox housingMultifunction switch The multifunction switch is operated by the relay shaft during a gearshift. When reverse gear is engaged, it switches on the reversing lights.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. SP46_57 S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Relay shaft 18GB 6-speed manual gearbox 01ETechnical highlights: – – – Installed transversely Three-section gearbox housing Lock synchromesh design as external synchromesh (as on 5-speed manual gearbox 01W/012) Input shaft running in three bearings (in gearbox) 1x radial needle bearing 1x radial cylindrical roller bearing 1x four-point bearing (axial bearing) Use of the four-point bearing eliminates the need to set the input shaft Additional mounting of input shaft by means of a needle bearing in the crankshaft of the engine (as for 5-speed manual gearbox 01W/012) Speedometer sender with Reed contacts (as for 5-speed manual gearbox 01W/012) Shift rods mounted in ball sleeves to reduce friction Synchromesh reverse gear––SP46_15–– – –Relay leverRetaining plateFunction of synchromesh reverse gear The driver for reverse gear pushes the reverse idler gear by means of the relay lever into the splines of the input shaft and at the same time into the synchroniser ring with locking pins. The synchroniser ring is held tight by the retaining plate by means of the locking pins. As a result, the reverse idler gear is braked together with the input shaft until they have come to a stop. Following this, the locking pins are centered in the holes of the retaining plate. Reverse gear can be engaged silently.SP46_42Synchroniser ring with locking pins **Reverse idler gearunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�To provide a clearer illustration the synchroniser ring with locking pins and the retaining plate are shown rotated 90˚ to their actual Protected by copyright. Copying forthe private or commercial purposes, in part or in whole, is not permitted installation position in gearbox.GB19 GearboxesAutomatic gearbox 01VTechnical highlights: – – Installed transversely The mechanism of the automatic gearbox operates in the principle of the planetary gear The gearbox is controlled electricalhydraulically, the hydraulic shift control unit (control valve body) being attached to the gearbox and the automatic gearbox control unit housed in the vehicle The engine torque is introduced into the gearbox by means of a hydrodynamic torque converter with integrated torque converter lockup clutch––SP46_16Operation of shift lever The shift lever for the automatic gearbox 01V with Tiptronic can be moved in two selection gates.Right Left selection gate: selection gate The dynamic shift programme (DSP) isLeft selection gateP RNDactive. It is possible to engage the positions P, R, N, D, 4, 3 and 2 in the same way as for the normal shift lever. The driver is not able to select first gear. This is engaged by the control unit only if necessary. Right selection gate: The manual shift programme - Tiptronic is active. The Tiptronic is activated by the driver moving the selector lever out of position D into the right selection gate. The gears are shifted by a short one-touch of the selector lever. If the selector lever is moved forward (in direction +) by means of a one-touch, the gearbox shifts up one gear. If the selector lever is moved back (in direction –) by onetouch, the gearbox shifts down one gear.4 32SP46_26Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�20GB BodySP46_36The body of the ŠkodaSuperb is the body offering the highest torsional rigidity at present within the range of Škoda cars. Thanks to the high deformation performance of the crumple zones of the car it is possible to already absorb a major part of the impact energy at these points.The ŠkodaSuperb was awarded a very good rating in the test conducted according to the Euro-NCAP (European New Car Assessment Programme). One must not forget in this connection that the test in conformity with Euro-NCAP is more demanding than required by legislation.The passenger cell of the ŠkodaSuperb is a space offering considerable shape stability Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted and assures a high degree of survival for unless the authorised You can find further information regarding the any liability by Š KODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept with respect to the correctness of information in this document. Copyright by Š KODA AUTO A. S.� occupants in the event of a crash. body and the Euro-NCAP in Self Study Programme 47.Front roof cross memberB-pillar reinforcementRear roof cross memberTop A-pillar reinforcementSill reinforcementBottom A-pillar reinforcementSeat belt reinforcementC-pillar reinforcementGB21 SafetyNew!In addition to the two front and side airbags the ŠkodaSuperb now additionally features a head airbag on the left and right.Head airbagSP46_28ISOFIX System ISOFIX is a name for a standard plug-type connection for child seats. Two metal lugs which operate in a pliers movement are attached in the bottom area of the rear of the child seat. These metal lugs are pushed through between the surface of the seat and the backrest and snap into bows which have been bolted to the body. The ISOFIX system thus ensures that the child seat is reliably anchored in the car.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability SP46_45 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�You can find further information on occupant protection in Self Study Programme 47.22GB Running GearSP46_37Front suspension The four-link front suspension used in the ŠkodaSuperb has contributed to perfecting the front-wheel drive of the car. It practically eliminates any influences transmitted from the drive train to the steering. The result is comfortable and safe driving. The handling is easy and pleasant, the straightahead running is particularly exact. An additional safety element is the neutral to understeering self-steering characteristic of the car. A feature of the four-link front suspension is that each wheel is located by four independently suspended track control arms and the track rod.Rear suspension The rear suspension is a torsion beam axle with anti-roll bar which has undergone further development. This modern and proven design is characterised by its simplicity and compactness while offering excellent properties in respect of wheel location. Coil springs and shock absorbers are separate and positioned one behind the other. This design permits a large through-loading width in the luggage compartment.Steering –Steering column adjustable forward/back and for height –or commercial Conventional power-assisted steering gear Protected by copyright. Copying for private purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability – Power-assisted steering gear not mounted The front suspension is attached to a subfwith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� on the subframe, but bolted to the underrame with large-volume bonded rubber busside of the plenum chamber hes. Coil spring and double-tube gas-filled shock absorber are combined to form a suspension strut.You can find further information regarding the running gear in the Self Study Programme 47.GB23 ElectricsControl units in the carPassenger-side door control unit J387 Control unit with display unit for radio and navigation system J503Mobile phone operating electronics control unit J412 Radio RClimatronic control unit J255Airbag control unit J234Right gas discharge bulb control unit J344Automatic gearbox control unit J217Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�ABS/ESP control unit J104Left gas discharge bulb control unit J343Radiator fan control unit J29324GB Sliding roof adjustment control unit J245Right rear door control unit J389Parking aid control unit J446Amplifier R12CD changer R41Headlight range adjustment control unit J431SP46_10Left rear door control unit J388Driver-side door control unit J386Traffic information control unit (TMC box) J559Convenient system central control unit J393Seat adjustment with memory control unit J136Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Engine control unit J...Control unit with display unit in dash panel insert J285GB25 ElectricsCAN bus systemEngine control unit J...W wire Drive train CANSteering angle sender G85GatewayABS/ESP control unit J104Automatic gearbox control unit J217Airbag control unit J234Control unit with display unit for radio and navigation system J503Mobile phone operating electronics control unit J412Multifunction steering wheel control unit J453K wireRadio RInfo CAN Convenience CANConvenient system central control unit J393Climatronic control unit J255Parking aid control unit J446Seat adjustment with memory control unit J136Convenience CANDriver-side door Passenger-side door Left rear door Right rear door Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted control unit control unit control unit control unit unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability J386 J387 J388 J389 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�this link will be implemented at a later dateSP46_35The ŠkodaSuperb features a CAN bus system, consisting of the drive train CAN and Convenience CAN. These differ in terms of their data contents and their transmission rate. – – Drive train CAN Convenience CAN 500 kbit/s 100 kbit/sThe databus diagnosis interface J533 (Gateway) is housed in the dash panel insert and performs the following tasks: – Data transfer between drive train CAN and Convenience CAN – Transmission of diagnostic data from drive train CAN and Convenience CAN over the K wire and vice versa The W wire transmits diagnostic data from the engine control unit.The Info CAN is integrated in the Convenience CAN.26GB Bi-xenon headlightsThe ŠkodaSuperb also features bi-xenon headlights. In these headlights both the dipped beam as well as the main beam are produced by a gas discharge bulb. The main beam is intensified by an additional halogen bulb. The improved light source is a further enhancement to active driving safety as it enables hazards to be detected sooner. In the system, already familiar from Self Study Programme 38, it was not possible to produce both dipped beam as well as main beam with only a single gas discharge bulb. The advantages which this system offers compared to the previous xenon headlight, are in particular: – Xenon light when driving with main beam which results in improved illumination of the road ahead and the surrounding area – Reduction in installation spaceComparison between halogen and bi-xenon main beamProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Halogen main beamSP46_54Xenon main beam enables the driver to see the deer on the left-hand side of the road sooner and to also reduce speed sooner.SP46_55GB27 ElectricsDesign The bi-xenon headlight consists of • the housing, • the bulbs for parking light, additional main beam, fog light and turn signal light, • the gas discharge bulb for dipped beam and main beam with ignition unit, • • • • the control unit for the gas discharge bulb, the baffle mechanism, the headlight cleaning system, and the headlight range adjustment motor.Fog light Additional main beam Dipped and main beam (gas discharge bulb) Headlight range adjustment motorSP46_43Parking lightTurn signal light Gas discharge bulb control unitSP46_44Headlight cleaning system (retractable)Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Headlight cleaning system A headlight cleaning system is integrated in the bi-xenon headlights. The headlights are cleaned when the righthand lever behind the steering wheel (windshield wipe/wash system lever) is moved into the automatic wipe/wash position when the lights are switched on, and is pulled and held in this position for more than about 2 seconds.SP46_5328GB Gas discharge bulbIgnition unitBaffle mechanism The use of a baffle mechanism makes it possible to achieve both main beam as well as dipped beam with only one gas discharge bulb in the so-called "bi-xenon headlight". The headlight is dipped by means of a solenoid which swivels a baffle into the light cone of the main beam and thus produces the dipped beam.Lens Baffle mechanism ReflectorSP46_48Baffle mechanism in dipped beam position Baffle SolenoidBaffle mechanism in main beam positionSP46_49SP46_50In the dipped beam position, the baffle is moved electromagnetically in such a way that part of the light cone produced in the gas discharge bulb is screened off.In the main beam position, the baffle is moved in such a way as to allow the entire light cone to pass through. An additional halogen bulb for the main beam is also switched on.Headlight flasher The headlight flasher is switched on by pulling the turn signal and main beam lever toward you. When this is done, the main beam halogen bulb is illuminated and the baffle is moved into the main beam position. If the dipped beam has been switched on beforehand, the gas discharge bulb is also illuminated. Note: The following additional equipment is mandatory on cars fitted with gas discharge headlights: • a headlight cleaning system • an automatic headlight range adjustment systemGBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted 29 any liability unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� ElectricsComing-HomeThe Coming Home function makes it possible for the dipped beam to remain illuminated for a certain time after leaving the car. This allows the area around the car to be illuminated at night and to assure a safer passage. This function is implemented by means of a control unit installed in the auxiliary relay holder above the relay holder on the driver side. The following steps must be performed in the order stated within 2 minutes in order to activate the Coming Home function: – – – – Switch ignition off (terminal 15), Switch dipped beam or main beam off (light switch E1), Operate headlight flasher once (dipped beam and headlight flasher switch E4), and Open the driver door (signal from convenient system central control unit J393).+15 +30 E4 J393J665E1J571When the driver door is open, the dipped beam is switched on. If the door remains open, the light switches off automatically after 3 minutes. If the driver door is closed within this time, the dipped beam remains on for a further 30 seconds.M29M31SP46_60Electric circuit E1 E4 J393 J571 J665 M29 M31Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Colour coding unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Light switch Dipped beam and headlight flasher switch Convenient system central control unit Bulb failure control unit Dipped headlight On/Off, Coming Home control unit Left dipped beam bulb Right dipped beam bulb= Input signal = Output signal = Battery positive = Bidirectional30GB Dash panel insertProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Classic and Comfort equipment versionSP46_51The dash panel insert features green illumination and red pointers. It is available in 2 versions: • Classic and Comfort • Elegance They differ in the display facilities used in the information display (large centre display). The following information is shown in this display: – On-board computer – Radio – Navigation system – Service interval – Auto check control – Selector lever position of automatic gearbox – Door, bonnet and boot lid warningThe dash panel insert comprises: – – – – – – – – – – Control unit with display unit in dash panel insert J285 Immobiliser control unit J362 Diagnosis interface for databus (Gateway) J533 Speedometer Rev counter Fuel gauge Coolant temperature gauge Warning lights (all as LEDs) Digital clock Information displayNew!Warning light for bonnet openGB31 ElectricsImmobiliser Generation IIICommunication betweenIgnition key with transponder ad immobiliser control unitGeneration IGeneration IIGeneration IIIFixed codeCryptic random codeCryptic random codeImmobiliser control unit and engine control unitFixed code over W cableFixed code over W cableCryptic random code over CAN busProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Dash panel insertImmobiliser warning lightImmobiliser control unitEngine control unitIgnition key with transponderIgnition key with reader coilSP46_52The immobiliser prevents the car being operated by an unauthorized person by intervening in the engine control unit. The new type of communication between the components using a cryptic random code which is always regenerated, makes it impossible to copy the ignition key.Note: If a non-authorized ignition key is used, the immobiliser warning light in the dash panel insert flashes constantly and it is not possible to operate the car.32GB Overview of immobiliserImmobiliser control unitCommunication Communication over single cable Ignition ONTransponder in keySP46_62SP46_51Energy If fix key code is o.k. Cryptic random code generated Cryptic random code Fix key code*Calculation based on algorithm ACalculation based on algorithm AResult immobiliser control unit Comparison of result immobiliser control unit/transponderResult transponderEngine control unit≠ =STOPProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP46_61Cryptic random codeCryptic random code generatedCalculation based on algorithm BCommunication over CANCalculation based on algorithm BResult immobiliser control unitResult engine control unit Comparison of result immobiliser control unit/engine control unit ENGINE START ENGINE STOP= ≠*Fix key code = fixed element of random code of transponder in keyGB33 ElectricsExterior mirror with entry lighting To enhance the convenience function when getting into and out of the car in the dark, the ŠkodaSuperb features a light to illuminate the entry area. This is located in the exterior mirrors. The light is produced by 6 LEDs in the mirror. To switch on the light – unlock the car, or – open a door. To switch off the light immediately – lock the car, – switch the ignition on, or automatically after 30 seconds if – all doors closed or not locked, – no door is opened after unlocking the car.SP46_58Marking for folding in both exterior mirrorsA further new electric function is the exterior mirror fold-in function as required by means of a switch.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability SP46_64 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Door handle lightingDoor handle lighting Door handleThe door handles feature illumination. The position of the door handles is thus also clearly visible in the dark. A white LED in each door acts as a light source. This light-emitting diode is activated when the exterior lights are switched on. The intensity of the light can be adjusted at random at the thumbwheel of the instrument lighting rheostat.SP46_63Front and rear footwell lighting The footwell areas of the driver, front passenger as well as at the rear left and right, are each equipped with illumination.Grab handle34GB ClimatronicEvaporator air outlet temperature sender G263 Heat exchanger EvaporatorTemperature flap motor V68Footwell/defrost motor V85 Fresh air blower V2 Central flap motor V70Climatronic control unit J255 AC compressorSP46_41Climatronic The Climatronic is featured with an additional evaporator air outlet temperature sender G263. It constantly signals the air temperature downstream of the evaporator to the Climatronic control unit J255. The ambient temperature (ambient temperature sensor G17 and fresh air intake duct temperature sensor G89) and the air outlet temperature downstream of the evaporator G263 are detected and this enables the Climatronic control unit J255 to more accurately control the switching off of the AC compressor. Dehumidification of the interior is improved as the air is dried to a greater extent. This largely prevents the windows from misting up. The Climatronic control unit is supplied with a signal from the wiper motor. If the wiper motor is operating – the speed of the fresh air blower is increased, – the air outlet temperature is increased by altering the position of the temperature flap, – the position of the footwell/defrost flap is altered (in "defrost" direction), and – the AC compressor is engaged, depending on the ambient temperature.Note: A brief signal sounds after the pushbuttons are operated. This function can be switched off or on Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability by pressing the DEFROST and with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� ECON buttons at the same time.GB35 Dimensions9572803 48031043SP46_3814691515 17651515 1895SP46_40SP46_39Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�36GB 1005964504462 l 103562 l834 957 2803 4803935SP46_32Volume of luggage compartment:462 litresPayload is dependent on drive train (engine/gearbox) and on the equipment of the car, it is:475 -585 kgPermissible trailer load (depending on engine) unbraked: braked: 650 750 kg1300 - 1600 kgCapacity of fuel tank:62 litresProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�671903 min. 2 . 113 maxmax. 1006 min. 757GB169737 DetailsUmbrella compartment A particularly practical detail in the Comfort and Elegance version is the umbrella compartment with a special umbrella in the left rear door. The umbrella compartment is integrated in the armrest. It is also possible to place the umbrella in this compartment when it is wet for the drops of water flow out along a separate water drain. If the umbrella compartment is not used for storing an umbrella, it is available for holding small items. In this case, the compartment is subdivided by a partition which folds down automatically and prevents the small objects placed in the compartment from slipping down to the bottom.SP46_66Adjuster for rear seat heatersRear operating unit The ŠkodaSuperb is equipped with an operating unit in the rear passenger compartment as a standard feature. This unit comprises: – – – an ashtray a cigar lighter which can also be used as a 12 V power socket two adjustable air outlets for the air conditioning or Climatronic systemAs an optional feature, two adjusters for the Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted heaters of the outer seat and backrest unless authorised byrear ŠKODA AUTO A. S. ŠKODA AUTO A. S. does surnot guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� faces can be integrated in the operating unit. The heaters are operated in the same way as for the front seats. Cigar lighterSP46_65AshtrayRear air vents38GB NotesProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB39