TECHNICAL DOCUMENTATION
SSP 053 Škoda Octavia

This PDF is currently unavailable.
Read document text
Service ŠkodaOctaviaThe second generation Presentation of the vehicle53List of Self-Study Programmes so farNo. Title 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 Mono-Motronic Central locking Anti-Theft Alarm Working with current flow diagrams ŠKODA FELICA ŠKODA-Vehicle safety Principles of ABS - not published ABS-FELICIA Immobilizer with transponder Air conditioning in vehicles FELICIA Air conditioning 1.6-ltr. Engine with MPI 1.9-ltr. Naturally aspirated diesel engine Power-assisted steering ŠKODA OCTAVIA 1.9-ltr.TDI engine OCTAVIA Convenience electronic system OCTAVIA Manual gearbox 02K/02J 1.6-ltr./1.8-ltr. Petrol engines Automatic gearbox - fundamentals Automatic gearbox 01M 1.9-ltr./50 kW SDI, 1.9-ltr./81 kW TDI 1.8-ltr. 110 kW petrol engine 1.8 ltr. 92 kW turbo petrol engine OCTAVIA, CAN databus OCTAVIA - CLIMATRONIC OCTAVIA - Vehicle safety OCTAVIA - 1.4-ltr. Engine and Gearbox 002 OCTAVIA - ESP OCTAVIA - 4x4 Petrol engine 2.0-ltr. 85 kW/88 kW OCTAVIA - Radio/navigation system ŠKODA FABIA ŠKODA FABIA - Vehicle electrics ŠKODA FABIA - Power-assisted steering Petrol engines 1.4-ltr. - 16V 55/74 kW ŠKODA FABIA - 1.9-ltr. TDI Unit injection 5-Speed manual gearbox 02T and 002 ŠkodaOctavia - Model 2001 Euro-On-Board-Diagnosis Automatic gearbox 001 6-speed manual gearbox 02M ŠkodaFabia - ESP Exhaust emissions Extended maintenance interval 1.2-ltr. 3-cylinder petrol engines ŠkodaSuperb; Presentation of the vehicle part I ŠkodaSuperb; Presentation of the vehicle part lI ŠkodaSuperb; 2.8-ltr./142 kW V6 petrol engine ŠkodaSuperb; 2.5-ltr./114 kW TDI V6 Diesel engine ŠkodaSuperb; Automatic gearbox 01V 2.0-ltr./85 kW Petrol engine with balance shaft transmission and 2-stage switching intake manifold ŠkodaFabia; 1.4-ltr. TDI engine with unit injection system ŠkodaOctavia; Presentation of the vehicle53Self-study programmeOnly intended for internal use in the Škoda-Organisation. All rights reserved. Subject to technical modification. C This paper was made out of chloriS00.2003.53.20 GB Technical status 01/04 ne-free bleached cellulose Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted © ŠkodaAuto http://portal.skoda-auto.comunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�ŠkodaOctavia - Vehicle with traditionŠkodaOctavia 1959 - 1964SP53_69ŠkodaOctavia 1996 - 2004Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP53_70ŠkodaOctavia 2004SP53_712GBGB47NotesContentsOctavia Vehicle measurements Body Occupant protection Engine/gearbox combinations Drive assemblies Force transmission ChassisProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�4 6 8 12 16 18 26 29 33 37 46Heating and air conditioning Electrical system NotesYou will find detailed inspection, setting and repair instructions in the provided repair manuals. The time of going to press was on the 20.1.2004. The contents are not updated.46GBGB3OctaviaBrief presentation of innovations and modifications on ŠkodaOctavia The radio AudienceThe radio Audience with integrated 6 CD changer compartment and high quality functions represents the Top Model amongst the radio systems obtainable for ŠkodaOctavia. Technical Data: • Output power 4 x 35 W • Tuner with RDS and FM/AM • Memory for up to 36 transmitter frequencies • Active graphic display with resolution 198x46 • Disks in format CD Audio, CD-R, CD-RW, multisession and MP3 playable • Digital audio processor with equalizer according to vehicle model • Connectable external sound amplifier • Integrated 6 CD changer compartment • Control via multifunction steering wheelSP53_48SP53_60Direction indicators installed in the exterior mirrors• Connectable hands-free kit • On vehicles with parking aid, schematic display of the distance from the vehicle to the obstacle is possible • Display of outside temperature and time is possibleSP53_31The new 6-speed direct manual gearbox 02EThe radio navigation systemThe radio navigation systemProtected by copyright. Copying for private or commercial purposes, in part or in whole, is notdistricts permitted during all passing through unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability and adapts to the routes of with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S. � the localIt is a device of a new generation, which monitors navigation traffic situation. Technical Data: • Output power 4 x 20 W • Multicolour display 6.5 “ • Tuner with RDS and FM/AM • Dynamic traffic guidance • Vocal and graphical output during navigation • Display of stored transmitter in the display • CD Audio, CD-R and CD-RW playable • Connectable external CD changer • Control via multifunction steering wheelSP53_61SP53_21• Connectable hands-free kit • Several selectable languages for voice output of the navigation as well as for menu functionsNew engines with FSI technology4GBGB45Electrical systemThe radio systemsThe radio MelodyThe radio Melody represents the base model in the series amongst the radio systems obtainable for ŠkodaOctavia. Technical Data: • Output power 4 x 20 W • Tuner with RDS and FM/AM • Memory for up to 30 transmitter frequencies • Cassette drive with autoreverse function • Connectable hands-free kitSP53_67SP53_58Head airbags for a better occupant protectionThe radio StreamThe radio Stream represents the middle class amongst the radio systems for ŠkodaOctavia with a large variety of functions and full graphical display with display possibility of information regarding the status and mode of Climatronic.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP53_68Automatic gearbox - TiptronicTechnical Data: • Output power 4 x 35 W • Tuner with RDS and FM/AM • Memory for up to 36 transmitter frequencies • Disks in format CD Audio, CD-R, CD-RW, multisession playable • Integrated single CD drive • Connectable external CD changer • Connectable hands-free kit • On vehicles with parking aid, schematic display of the distance from the vehicle to the obstruction is possible • Display of outside temperature and time is possibleSP53_59 SP53_01SP53_37A completely newly developped four control armed rear axleSP53_412C-Air conditioning44GBGB5Vehicle measurementsInnovation!DesignOne of the essential and positive modifications relating to the vehicle measurements of ŠkodaOctavia is the enlargement of the wheelbase to 66 mm in contrast to the previous model. This made it possible for the passenger seating compartment to be enlarged to 47 mm.Note! The measurements marked in blue are dimension modifications in comparison to the first generation of ŠkodaOctavia.The parking aid system consists of: • Control unit • 4 ultrasonic sensors in the rear bumper • 4 ultrasonic sensors in the front bumper • Loudspeaker • Switch + electric installation.SP53_55Control unitSP53_56Ultrasonic sensorActivation/deactivation of parking aid The parking aid is activated: • When ignition is switched on, • when reverse gear is engaged, or • by pressing the M switch (for the activation by means of the switch, the vehicle speed must be below 15 km/h). The system is deactivated: • By pressing the M switch, or • by increasing the vehicle speed to above 15 km/h. By pressing the M switch the parking aid is simultaneously activated or deactivated at the front as well as at the rear.Switch for the parking aid in the centre consoleSP53_57*)SP53_02The given value means the vehicle height when empty including 3 persons.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP53_03SP53_04Note! On vehicles with standard installed trailer coupling device, the rear parking aid is automatically deactivated after coupling a trailer.GB 436GBElectrical systemInnovation!The parking aid - rear and frontFor an easy parking, ŠkodaOctavia was equipped with the parking aid, not only at the rear as on the previous model but also at the front. The parking aid functions with the aid of ultrasonic signals, which are transmitted and received by ultrasonic sensors. If an obstacle is located within a certain minimum distance from the sensors, the driver is informed about this fact through acoustic signals in combination with a visual display in the radio display. The acoustic distance warning begins at a distanProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted ce of 160 cm to the obstacle. If the distance is unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability decreased the timely between the sound with respect to theinterval correctness of information in this document. Copyright by ŠKODA AUTO A. S.� impulses becomes shorter. A continuous signal sounds at a distance less than 30 cm (the so-called danger zone).SP53_05Parking aid control unitLuggage compartment capacity Tank capacity560 l 55 l 1230 - 1550 kg 660 - 470 kgAcoustic distance warning (loudspeaker)SP53_53Empty weight 1) Payload1)Ultrasonic sensorMax. permissible trailing load Braked 1) 900 - 1400 kg 600 - 650 kg 75 kgThe visual distance warning is performed in the radio display, where the distance to the obstacle is schematically displayed.Brakeless 1)Max. permissible draw-bar support load on the ball head of the trailer coupling device1)Note! The visual display of the distance to an obstacle is only assisted by the radio systems AUDIENCE and STREAM.SP53_54The given values represent the dependent weight range of the fitted drive assembly and the special equipment.42GBGB7BodyThe body characteristicsIt was the task of the design work on the body of ŠkodaOctavia to achieve a higher safety of the body in comparison to the previous model. The body profiles were optimized by means of modern mathematical calculations and models, through which new standards in the static and dynamic rigidity could be set.C D A BInnovation!The automatic driving light controlThe automatic driving light control has first of all a safety relevant function. When positioning the light spindle switch to the function „automatic driving light control“, the complete vehicle lighting is automatically switched on in line with the surrounding brightness. The automatic driving light control switches on the following lights: • Low beam light • Tail light • Surrounding light • Licence plate light The sensorCDue to this knowledge, an increased rigidity of the body and simultaneously a weight reduction has been achieved. The body light construction is identified through an even better detailed design than on the previous model. This becomes also clear in the lower value of the so-called „light construction quality“.SP53_51EThe light sensor for the automatic driving light control is installed in the foot of the interior mirror. The light sensor consists of the following components: • Three directional sensors with vision in direction of the vehicle horizontal with an opening angle of 10° per sensor • A surrounding light sensor with vision in direction of the vehicle verticle with an opening angle of 10° and 80° to the side The switch-on conditionsNote! The light function activated via the light spindle switch has always priority in relation to the independently chosen light function from the automatic driving light control.Note! The light construction quality is determined by a mathematical relation where the following values are put into proportion: • Mass of basic body frame • Wheel tread and • Torsion rigidity Therefore the light construction quality is higher, the lower its value.8When driving into a tunnel, the vehicle lighting is switched on immediately and after leaving the tunnel it is switched off after a time delay of about 5 seconds. When passing under bridges and short underProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted passes as well as in fog, the vehicle lighting is unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability not activated, because the horizontally directed with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP53_52light sensor (in contrast to the vertically set light sensor) detects the light.Note! The vehicle lighting must be set manually if required.GBGB41Electrical systemThe automatic dimming interior rear-view and exterior mirrorsThe automatic dimming interior rear-view and exterior mirrors should protect the driver in the dark from being dazzled by the following traffic, without the driver having to adjust the mirrors. Decreased night vision, reduced dawn visual acuity in the dark and increased dazzle sensitivity considerably increase the risk of accident.The body structureWhen making the body of ŠkodaOctavia the heat moulded sheet metal, the so-called „solid sheet metal“, is used more often than on the previous model The firmness of the individual components could be increased without any detriment to the body weight through the use of solid sheet metal.Innovation!Electrochromatic cell by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Protecteddimming in this mirror document. Copyright by ŠKODA AUTO A. S.� Silver reflectivewith respect to the correctness of informationmatic coating Glass pane Glass panePhotosensorforAUTO switching the autounless authorised by ŠKODA AUTO A. S.Knob ŠKODA A. S. off does not guarantee or accept any liabilityThe body shell forms a combination of certain types of solid sheet metal: • Standard sheet metal (220 - 300 Mpa) (36%) • High solid sheet metal (300 - 550 Mpa) (16%) • Maximum solid sheet metal (550 - 1400 Mpa) (14%) The remaining part of the body: • Overall deep-drawing sheet steel (0 - 220 Mpa) (30%) • „Tailored-Blank“ boards (4%) „Tailored-Blanks“ is laser welded sheet metal with different material thicknesses.E Electrolyte SealingSP53_50AWO3 coating transparent, electrically conductive coatingThe solid sheet metal is fitted with several shells in particular for the „B-pillar“ and the adjoining body area in direction „A-pillar“. A high level of safety for the occupants in the event of a side collision is assured by using the heat moulded sheet metal in this area.Operation The interior rear-view mirror consists of an electrochromatic cell, an electronics and two photosensors. The photosensors are mounted in the mirror housing opposite each other. The sensor directed towards the driver monitors the dazzlement. The sensor directed towards the windscreen monitors the surrounding light. The signals of both sensors are compared and evaluated in the electronics. If more light falls onto the photosensor on the driver side than on the other side, a voltage is applied through the electronics to the tranparent electrically conductive coating. The applied voltage leads to the immediate darkening of the WO2 coating. As soon as more light is detected by the other sensor, the mirror immediately returns to its original state. The exterior mirrors have no photosensors and their dimming is controlled in line with the interior rear-view mirror.SP53_06BDNote! When engaging the reverse gear, the dimming function of the interior rear-view and exterior mirror is deactivatedSP53_07Heat moulded sheet metalSP53_0840GBGB9BodyThe technology of body seamsOther elements of the technology applied on the body of the second generation of ŠkodaOctavia can be observed in the field of seam technology. The following technologies have been applied more often than on the previous model. • Laser seams • Glue lengthInnovation!The direction indicatorsOne of the innovations in the design of ŠkodaOctavia are the direction indicators integrated in the exterior mirrors. The direction indicators which are installed in such a way contribute considerably to the active safety of the vehicle, because they are well visible for the other oncoming traffic that has enough time and space to react to a change of driving direction.SP53_48The technology of the laser seamsThe technology of laser seams displays better characteristic features in comparison to the usual welding method. • The laser seams show more bending and torsion rigidity in comparison to the usual welding seams. • The laser seams are narrower than the usual welding seams. • During the welding procedure of the laser seams, the parts to be connected are not under such a high thermal load which otherwise could have a negative influence on the material properties (firmness, rigidity, shape...). This technology of welded joints is applied e.g in the superstructure of the body (roof + outer side part), for the frame side rails in the front and rear part (rear side part + tailgate water drain channel).The glue lengthsThe glue lengths are applied: • for increasing firmness of the welding seams, • there, where welding is not permitted due to thermal load. The glueing is performed through the application of a high strength glue before the actual welding, there, where an increased firmness is required. In the oven the seam hardens completely and acquires its required properties. The seams which are treated in this way are used e.g. in the area of the rocker panel.Innovation!The tyre inspection displayThe automatic tyre inspection display also belongs to the active safety. The pressure loss in the tyre is indicated by the lighting up of the warning light in the dash panel insert in combination with a brief warning signal, whenever the pressure loss is about 30 % or more.The tyre circumference is dependent on the tyre inflation pressure. When changing the tyre inflation pressure, the tyre circumference changes as Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted well. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�A-ARoof Laser soldered zero jointThe tyre inspection display is performed via a software which belongs to the ABS control unit. The ABS control unit compares the circumferential speed on all 4 wheels and determines on the basis of the determined values and their possible deviations the pressure loss in the tyres.SP53_49Outer side partSP53_09 SP53_10Note! In case of extremely fast driving, when cornering or driving on uneven surfaces as well as braking or activating an ABS system, the tyre inspection display temporarily switches off automatically.GB 3910GBElectrical systemCAN databus-networking conceptK-wireCAN databus diagnosisThe well-adapted deformable frame side railJ285 CU for display in dash panel insertJ533GatewayDiagnostic connection J503CU for display unit for radio and navigationCAN databus infotainmentCAN databus convenienceJ543 CU for seat adjustment with memory J345 CU for trailer drawbar J446 CU for parking aidJ412 CU for mobile phone controlCo-driver door control unit J388In order to achieve the best possible crash results for individual components at low speeds (up to 15 km/h), the development work on the entire bumper system with its detachable components was already coordinated in good time. Thus their CAN databus drive shape and properties could be improved, which made it possible to drastically reduce the damage J386 J527 J743 on important components, such as for example Direct shift CU for steeDriver door on: gearbox mecharing column control unit tronics* electronics Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted • AC condenser unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability G85 • Radiator with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� J217 J387 • Air guide Steeringangle sender CU for automatic gearboxCAN databus combiOne of the design elements which reduces the damage on the individual components, is the well-adapted deformable frame side rail. The well-adapted deformable frame side rail-front part should absorb if possible a lot of movement energy in case of a frontal collision, while its part which is located further to the rear remains undamaged. Therefore the frame side rail-front part is well-adapted deformed in case of a collision and reduces through this the effects of deformation on the other components of the vehicle.J525 CU for digital sound packageLIN databusE221J587 CU for selector lever sensors* J...Engine control unitRear left door control unitMulti-function steering wheel G273 Interior monitoring sensor H12 Alarm hornDeformation foam (reduces the risk of injury for pedestrians in case of collision)Bumper cross memberWell-adapted deformable frame side rail-front partJ255/J301CU for Climatronic/air conditions systemJ389 Rear right door control unit J393Convenience system central control unitJ583 CU for NOx sensorJ400 CU for wiper motor LIN databus G397 Rain and light detector sensorJ604 CU for auxiliary air heaterJ431 CU for headlight range control J104 CU for ABS and ESPSeparate CAN databusJ519 CU for onboard supplyLIN databusG384 Vehicle inclination senderG419 ESP sensor unitJ500 CU for power steeringFront bumperSP53_11J234 Note: CAN = CAN databus. * only on gearbox 02E CU for airbag SP53_47Note! All mathematically calculated deformation ranges of the body are practically inspected in the event of type damage tests.GB 1138GBOccupant protectionPassive safetyTheProtected airbagby system copyright. Copying for private or commercial purposes, in part or in whole, is not permittedunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to comprises: the correctness of information in this document. Copyright ŠKODA AUTO S.�airbag control The airbag system The vehicle is by equipped with A. the unit with integrated crash sensors (sensors for • all existing airbags in the vehicle negative acceleration), which ensures the com• Airbag control unit munication with two types of external crash • Crash sensors sensors: • Key switch and electric installation • Crash pressure sensorsElectrical systemThe fuse boxes and relay positions in the electrical system The electrical system in ŠkodaOctavia is also designed decentralized as on the previous model. Because of the diffferent installation conditions, the fuse boxes and the relay positions are located at different locations in the vehicle. These components are mounted decentralized. This means, they are located close to their relevant components and functional groups. The functioning of the entire system in the vehicle is controlled by a series of specialised control units. The communication between the control unit and other functional groups of the electrical system is performed via CAN databus.The airbag system in ŠkodaOctavia is based on the proven system from the previous model. Certain design elements are newly added.Innovation!• Sensors for negative vehicle acceleration The signals coming from the external pressure sensors are evaluated by the airbag control unit and compared with the signals of the integrated pressure sensors in the airbag control unit. The force of the accident is assessed by matching these signals. If a large accident force is detected, the corresponding airbags are activated.In contrast to the previous model the vehicle can be additionally fitted with two head airbags besides the driver and front passenger airbag as well as the two side airbags. For the protection of the cockpit and rear passengers, two head airbags are mounted in the upper part of the door fame from „A“ to „C-pillar“.Fuse boxAirbag control unit with integrated sensors for negative acceleration in case of side and frontal collision.Onboard supply control unitNote! If the vehicle is equipped with an airbag system, which comprises the front and side airbags and also the head airbags, the airbag control unit (optional) enables a reuse up to 3x frontal and 3x side collision with airbag deployment.12 GBElectric box in engine compartmentAdditional relay carrier below the dash panelSP53_46GB37Heating and air conditioningThe ClimaticThe Climatic enables an automatic temperature setting in the interior of the vehicle with manual operation of the air distribution flaps. The function is similar to the system from ŠkodaFabia. The fresh air flap and the recirculated air flap as well as the temperature flap are driven by the control motors. The flaps for the air distribution are manually operated with a rotating actuator via a flexible shaft, similar as on the previous model. The air distribution in the vehicle is identical to the Climatronic system.Innovation!For the first time on ŠkodaOctavia, a pressure sensor was installed for detecting a side collision. It is installed in the front doors for a precise detection of the collision point. In case of side collision, the inside of the door is distorted, which results in a change of pressure in the door. The pressure sensor detects the pressure change and transmits a signal to the control unit. The control unit assesses this signal and activates the side and also the head airbags.Additionally a sensor for negative lateral acceleration in the rear wheelhouse trim panel is used for detecting a side collision which does not distort the front door but through which the side and also the head airbags should be activated.SP53_43Pressure sensor for detecting a side collision in the door range.SP53_13Operating unit - ClimaticSP53_14SP53_44Sensor for negative lateral acceleration in case of side collision towards the rear of the vehicleThe heating and ventilation systemThe function of the heating and the ventilation system in ŠkodaOctavia is similiar to the system in the previous model. The temperature as well as the air distribution flaps are manually operated. Only the fresh air-recirculated air flap is operated via a control motor. The temperature flap is operated via a Bowden cable. The flaps for the air distribution are manually Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted operated with a rotating actuator via a flexible SP53_45 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability shaft. with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� 36 GB GB Operating unit - heatingSP53_12Note! For safety reasons, if an airbag is deployed, the fuel supply is automatically interrupted, the hazard warning light system is switched on, the vehicle doors are unlocked and the interior light is switched on.13Occupant protectionThe seat belts and the belt tensioners with belt force limiterŠkodaOctavia was equipped with a three-point seat belt system for the front seated positions and also for all the rear seated positions in order to meet the increasing demands for the safety of the occupants. The ball belt tensioners are installed in Škoda Octavia. The belts for the driver and the front passenger are fitted with belt tensioners as standard. The rear, outer seated positions are only fitted with belt tensioners when equipped with head airbags. The seat belt and the ball belt tensioner form together with the belt force limiter one component. The automatic air conditioning system Climatronic All versions of heating and air conditioning are based on the same base unit. The difference of the individual systems lies in the operation of the air distribution flaps. The 2C-Climatronic has an additional fresh air-air flow flap, which is closed as of 100 km/h at an increasing speed. This results in the quantity of supplied fresh air remaining constant also at different speeds.BeltThe automatic air conditioning Climatronic has a fresh air-air flow flap as well as a separate recirculated air flap. The heating and the semi-automatic air conditioning Climatic have a combined fresh air-recirculated air flap.Deployment devicepyrotechnical propellantThe belt tensioners for the front seated positions as well as for the rear outer seated positions are activated before the deployment of the front Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted airbags. unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Defroster flap Left footwell vent temperature sender G261Fresh air/air flow flap V71 control motor Central flapFresh air/air flow flap Fresh air intake duct temperature sensor G89 Recirculated air flap Recirculated air flap control motor V154 Right footwell vent temperature sender G262The belt tensioners are electrically activated by the airbag control unit.Ball collecting reservoirSP53_15Defroster flap control motor V107GearSupply pipe with ballsLeft temperature flap control motor V158The belt tensioners in combination with the three-point seat belts offer the occupant a better seated position in case of an accident and therefore considerably reduce the risk of injury.Note! Please use SSP 47 for the exact description of the function of the ball belt tensioner.Central flap control motor V70 Left and right temperature flaps Vent for rear left footwellRight temperature flap control motor V159 Evaporator out-flow temperature sender G263 Vent for rear right footwell Vent for rear centre (centre console)SP53_4214GBGB35Heating and air conditioningFor ŠkodaOctavia, three versions of the heating and air conditioning system are offered: • Climatronic (fully automatic air conditioning and heating) • Climatronic (semi-automatic air conditioning and heating) • Heating and ventilation systemInnovation!The active head restraint systemFor the first time in ŠkodaOctavia the front seats are equipped with an active head restraint system. This system contributes considerably to passive safety, in particular in case of rear collision. The effective principle of the active head restraint system consists of decreasing the distance between the head of the occupant and the head restraint in the event of a collision so that the risk of injury to the cervical vertebra is reduced.Innovation!The ClimatronicOnly the model ŠkodaOctavia from the complete model range of Škoda vehicles has been fitted for the first time with the fully automatic 2-zone air conditioning system. The 2-zone air conditioning system distinguishes itself through different temperature ranges which can be set for the driver and the front passenger side independent of each other. All flaps for air distribution are operated via the control motors. The air guide to the left and right dash panel vents passes through the dash panel. The air guide to the rear footwell blowers and to the rear vents is separated in the centre console.In case of rear collision the activation of the system is performed through the inertia force of the occupant. The transmission of the occupants force onto the seat exerts pressure onto the rear suspension of the backrest. A lever mechanism which is connected to the head restraint is located in the lumbar support. The pressure release of the occupants force puts pressure onto the lumbar, which moves the head restraint upwards and forwards by means of a lever mechanism and thereby reduces the distance between the head of the occupant and the head restraint. After the collision the system returns to its home position.SP53_16The ISOFIX systemSP53_40ISOFIX is an international designation for a uniform child seat attachment system in the vehicle.Operating unit - ClimatronicThe retaining eyes which are pushed into the retaining clamps of the child seat, are attached at the rear of the vehicle body. Due to this support, Protected by copyright. Copying for private or commercial purposes, inthe partchild or in whole, isreliably not permitted seat is and safely attached in the unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability vehicle. with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� In ŠkodaOctavia this system is not only installed on the rear seat bench as on the previous model but also on the front passenger seat. In this case the retaining eyes for the retaining clamps of the child seat are anchored in the front passenger seat frame.SP53_17SP53_4134GBGB15Engine/gearbox combinationsHeating and air conditioningThe air distribution in the vehicleSetting the air distribution flaps with either heated or cooled air flowing through regulates the temperature in the vehicle.1.4-ltr. - MPI Engine 55 kW 126 Nm1.6-ltr. - MPI Engine 75 kW 148 Nm1.6-ltr. - FSI Engine 85 kW 155 NmSP53_18SP53_19SP53_20SP53_62Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� SP53_63 SP53_64SP53_395-speed manual gearbox 0AF6-speed automatic gearbox 09G6-speed manual gearbox 02SInnovation!The rear footwell vents in the centre console are intended for the occupants at the rear.Note! The list corresponds to the engine/ gearbox combinations after start of series manufacturing.The vehicle is equipped with a dust and pollen filter for collecting mechanical contaminations in the suctioned outside air.The recirculated air mode prevents contaminated outside air entering the inside of the vehicle.16GBGB33ChassisInnovation!The steeringFor the first time in ŠkodaOctavia, an electro/ mechanical steering with double pinion is used and replaces the hydraulic steering assistance of the previous model. The steering support results from a separate transmission, which is effective on the steering rack and is driven by an electric motor. A torque sensor, which is seated on the steering housing, determines the torque at the steering pinion. The necessary supporting torque is dependent on: • the vehicle speed • the operating force at the steering wheel • the steering angle. The E-engine and the control unit form a compact unit with the steering housing (cannot be replaced separately).Attachment (elastic) Worm drive Servopinion Steering housing Steering shaft connectionThe communication is performed via a CAN databus line All the vehicles are equipped with the electro/ mechanical steering support. Advantages of the electro/mechanical steering: • Reduction of fuel consumption, because the steering only needs energy, when the vehicle is actually steered. • the hydraulic components (e.g.: Servo oil pump, hoses, oil reservoir) • low sensitivity in case of uneven road surface • low noise development in the inside of the vehicle • a good straight ahead drive through „active resetting“ of the steering (wheels) in the straight ahead position and through this an optimal steering feeling in each situation2.0-ltr. - FSI Engine 110 kW 200 Nm1.9-ltr. - TDI PD-Engine 77 kW 250 Nm2.0-ltr. - TDI PD-Engine 103 kW 320 NmSP53_21SP53_22SP53_23Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP53_64SP53_65SP53_665-speed manual gearbox 0A4Bellows Track rod Control unit E-engine Sensor steering torque Steering pinion Attachment (rigid)SP53_386-speed manual gearbox 02Q6-speed direct manual gearbox 02E32GBGB17Drive assembliesThe 1.4-ltr./55 kW MPI Engine with 4-valve technologyTechnical descriptionThis engine is based on the known engine from the other Škoda vehicles. It was adapted with certain new design modifications to the space conditions of ŠkodaOctavia.The rear axleThe completely newly developped compact four control armed rear axle: • upper and lower transverse control arm + connecting control arm and • 1 longitudinal control arm increases driving comfort and stability. Coil springs out of high quality steel with linear spring characteristics are used. The hanging of the springs is performed through rubber supports on the body and the spring control arm. The two-pipe gas pressure dampers are positioned at the far outside of the wheel-bearing housing. Thus the optimal ratio from the wheel path to the damper path is achieved and a large luggage compartment through-loading width is assured.Innovation!SP53_18• Change of location of the non-return valve for the cylinder head cover ventilation • Pre-catalytic converter integrated in the exhaust gas pipe (previously in the exhaust manifold) The assembly carrier is designed as a welding • Reflux-free fuel system part and is screwed rigidly to the body. • Electrical acceleration control with touchless accelerator pedal position sender on the basis The upper transverse control arm establishes the Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted of the electromagnetic induction connection between assembly carrier and unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept the any liability wheel-bearing housing • Touchless clutch with position respect to sender the correctness of information in this document. the Copyright by ŠKODA AUTO A. S.�in the upper level. It serves first and foremost for transducing the lateral forces by means of its T-shape cross-section.On all vehicles the rear axle is equipped with disc brakes as standard.Torque and power output diagram220 200 180 160Torque (Nm)Technical DataEngine identification character110 100 90 70 60 50 40 30 20 10 1000 3000 5000 7000Power output (kW)Design Displacement (cm3) Bore (mm) Stroke (mm) Valves per cylinder Compression ratio max. power output max. torque Engine management Fuel Emission after treatmentBCA 4-cylinder inline engine 1390 76,5 75,6 4 10,5 : 1 55 kW at 5000 rpm 126 Nm at 3800 rpm Bosch Motronic ME 7.5.10Super unleaded RON 95, or normal unleaded RON 91Upstream of catalytic converter probe: Linear lambda probe, downstream of catalytic converter probe: Jump probe80140 120 100 80 60 40 20Engine speed (rpm)SP53_24Emission standardEU4Note! The track and the camber at the rear axle are adjusted separately on ŠkodaOctavia.GB GBSP53_371831ChassisThe front axleThe front axle in ŠkodaOctavia distinguishes itself through a series of design modifications and innovations. The McPherson axle with lower three-corner transverse control arm and assembly carrier with console. The assembly carrier with console serves as a support of the transverse control arm, anti-roll ball, steering gear and thus contributes considerably to the increase of the body rigidity. Linear coil springs with advanced polyurethane auxiliary springs are fitted as spring elements.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted SP53_35 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Innovation!In ŠkodaOctavia, the second generation uses a screwed wheel bearing unit of the 3rd generation (flange bearing with wheel hub as structural unit).The 1.6-ltr./75 kW MPI Engine with 2-valve technologyTechnical descriptionThe 1.6-ltr./75 kW MPI Engine is based on the engine from ŠkodaOctavia of the first generation with identification characters AVU and BFQ. It was adapted to the space conditions of the second generation of ŠkodaOctavia, which required certain modifications. • Shape of the switching intake manifold adapted to the space conditions • Reflux-free fuel system • Intake manifold pressure and temperature sender (beforehand air mass meter) • Electrical acceleration control with touchless accelerator pedal position sender on the basis of the electromagnetic induction • Touchless clutch position senderSP53_19Torque and power output diagram220 200 180 160Torque (Nm)Technical DataEngine identification character110 100 90 70 60 50 40 30 20 10 1000 3000 5000 7000SP53_25140 120 100 80 60 40 20Power output (kW)80Design Displacement (cm3) Bore (mm) Stroke (mm) Valves per cylinder Compression ratio max. power output max. torque Engine management Fuel Emission after treatmentBGU 4-cylinder inline engine 1595 81 77,4 2 10,5 : 1 75 kW at 5600 rpm 148 Nm at 3800 rpm Simos 7.1Super unleaded RON 95, or normal unleaded RON 91Upstream of catalytic converter probe: Linear lambda probe, downstream of catalytic converter probe: Jump probeEngine speed (rpm)SP53_36Emission standardEU4/EU2 DDK30GBGB19Drive assembliesInnovation!ChassisTechnical descriptionThe 1.6-ltr./85 kW FSI Engine belongs to the engines of a complete new generation. Only the model ŠkodaOctavia from the complete model range of Škoda vehicles has been fitted for the first time with the FSI Engine. The main feature of the FSI engines is the fuel direct injection into the combustion chamber, which leads to an increase in power output, an improved torque course and a low fuel consumption. • Camshaft drive via a timing chain • Controlled dualcentric oil pump (up to 30% less energy consumption of the engine) • Variable intake camshaft control (max 40°) • Petrol direct injection MED 9.5.10 with double injection • Controlled fuel system (exact fuel proportioning for the specified time) • Two-circuit cooling system (2 coolant thermostats)The chassis characteristicsThe chassis of ŠkodaOctavia was subject to a series of design modifications with emphasis on the always increasing demands for vehicle dynamics and vehicle comfort. The design modifications which fulfill these demands are in particular identified through the use of the completely new front and rear axle. The electro/mechanical power steering assists the driving behaviour in an excellent way and creates a precise steering feeling as well as adapts harmonically the steering forces to the increasing vehicle speed. ŠkodaOctavia offers three chassis versions: • Standard chassis • Sport chassis (inserted 15 mm deeper in comparison to the standard chassis) • Rough road chassis (adjusted 20 mm higher in comparison to the standard chassis). The chassis differ in springs, dampers, anti-roll bars as well as bearing elements.The 1.6-ltr./85 kW FSI Engine with 4-valve technologySP53_20Note! Use SSP 55 for further information regarding the 1.6-ltr./85 kW FSI Engine.Torque and power output diagram220 200 180 160Torque (Nm)Technical DataEngine identification character110 100 90Power output (kW)80 70 60 50 40 30 20 10 1000 3000 5000 7000140 120 100 80 60 40 20BLF Design 4-cylinder inline engine Displacement (cm3) 1598 Bore (mm) 76,5 Stroke (mm) 86,9 Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Valves per cylinder 4 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with ratio respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Compression 12 :1 max. power output 85 kW at 6000 rpm max. torque 155 Nm at 4000 rpm Engine management Bosch Motronic MED 9.5.10 Super Plus unleaded RON 98, Fuelor Super unleaded RON 95Linear lambda probe upstream of 1st catalytic converter, jump probe downstream of 2nd catalytic converterSP53_34Emission after treatment Emission standardDepending on the chassis and the drive assembly the vehicle is fitted with 15, 16, 17-inch wheels.Innovation!Engine speed (rpm)SP53_26EU4The vehicle is also equipped in the basic version with the brake system with ABS (model: MK70) in combination with all chassis and drive assemblies. 2920GBGBForce transmissionInnovation! Innovation!Technical descriptionThe 2.0-ltr./110 kW FSI Engine belongs to the new generation of powerful engines and is fitted for the first time only in the new model ŠkodaOctavia from the complete model range of Škoda vehicles. The function of the 2.0-ltr./110 kW FSI Engine is similar to the 1.6-ltr. FSI Engine. The fuel direct injection in the combustion chamber offers a lot of advantages, just as for the 1.6-ltr FSI Engine. The FSI engines have larger compression ratios than the MPI engines. • Up to 15% less fuel consumption • Two subjacent camshafts with variable intake camshaft control driven via a toothed belt • Balancing shaft transmission in the oil pan • Plastic switching intake manifold with contactor controller for homogeneous and mixture mode (only the BLX engine) • Water-cooled valve for exhaust gas recirculation • One piston high pressure pumpThe TiptronicIn the vehicles ŠkodaOctavia, automatic gearboxes with the shifting program Tiptronic are used in contrast to the automatic gearboxes in the previous model. The Tiptronic is a shifting program of the automatic gearbox, which enables the driver to shift the gears manually (sequentially) with the selector lever. However the driver does not control the shifting fully, because if required (engine speed too high or too low) the gearbox changes the gears independently of the driver‘s instruction. Left selector passage: If the selector lever is in the left selector passage; the dynamic shifting program DSP is active. The selector lever can be moved in the following positions: • P, R, N (park position, reverse gear, neutral) • D (permanent position for driving forwards) • S (sport position)The 2.0-ltr./110 kW FSI Engine with 4-valve technologyRight selector passage: The manual (sequential) shifting program Tiptronic: The Tiptronic is activated, when the The selector lever is identical for the direct madriver moves the selector lever out of the poProtected bythe copyright. Copying for private or commercial purposes, in part or in whole, is not permitted nual gearbox 02E as well as for automatic sition „D“ into the right selector passage. Theany liability unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept gearbox 09G. The selector lever for thecorrectness auto- of information shifting is performed briefly tipping the A. S.� with respect to the in this document. by Copyright by Š KODA AUTO matic gearbox with Tiptronic offers two shifting selector lever in direction „+“ and „-“. If the programs and therefore can be moved in two selector lever is tipped in direction „+“, the selector passages. gearbox shifts to a higher gear, in direction „-“ it shifts to a lower gear.SP53_21Note! Use SSP 55 for further information regarding the 2.0-ltr./110 kW FSI Engine.Torque and power output diagram220 200 180 160Torque (Nm) left selector pathTechnical DataEngine identification character110 100 90 70 60 50 40 30 20 10 1000 3000 5000 7000SP53_27140 120 100 80 60 40 20Power output (kW)80Design Displacement (cm3) Bore (mm) Stroke (mm) Valves per cylinder Compression ratio max. power output max. torque Engine management Fuelright selector pathSP53_33Engine speed (rpm)Emission after treatment Emission standardBLX/BLR/BLY 4-cylinder inline engine 1984 82,5 92,8 4 11,5 : 1 110 kW at 6000 rpm 200 Nm at 3500 rpm Bosch Motronic MED 9.5.10 Super Plus unleaded RON 98, or Super unleaded RON 95 2 Pre-catalytic converters, 1 catalytic converter BLX/BLR-EU4/BLY-EU228GBGB21Drive assembliesThe FSI fuel system with controlled fuel deliveryInnovation!The 6-speed automatic gearbox 09GDoor contactElectrical system conProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted trol unit J519 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The 6-speed automatic gearbox 09G in ŠkodaOctavia is based principally on the already previously installed automatic gearbox 01M in the other Škoda vehicles. The gearbox in the second generation of ŠkodaOctavia distinguishes itself through a series of design modifications and innovations, such as e.g. through the 5th and 6th gear.The 6-speed automatic gearbox 09G is a compact, light, electrohydraulically controlled planetary gear. It is designed for front-wheel-drive and lateral installation.Features of the gearbox: • max. torque 310 Nm • weight of 84 kg • structural length of approx. 350 mm • hydrodynamic torque converter with converter lockup clutch coupling • Automatic and Tiptronic modeFuel pump control unit J538Fuel filterSP53_32The gearbox designPressure from 4 - 5 barThe gearbox actuationJust as for the gearbox 02E the gearbox 09G offers two shifting programs: • the dynamic shifting program DSP which allows the selection of two driving styles (driving style „D“ for all types of driving and driving style „S“ for sport driving) and • the shifting program Tiptronic (the manual shifting program). The control of the shift programs is performed by an external electronic control unit. Its own shifting is performed by a hydraulic control unit in the oil pan.The six forward gears and the reverse gear are possible through the arrangement of a simple set of planetary gears with a series- connected double planetary gear set (Ravigneaux planetary gear set). The planetary gear sets are mounted according to the Lepelletier principle.Fuel pump G622GBGB27Force transmissionInnovation!The 6-speed direct manual gearbox 02EThe second generation of ŠkodaOctavia is the first vehicle from the ŠkodaAuto Production which is equipped with the 6-speed direct manual gearbox 02E and has the following advantages of a manual gearbox: • High efficiency • as well as ruggedness and sportiness with that of an automatic transmission: • a lot of comfort, especially when shifting gears. On the basis of its conception with two multiple disk clutches and different automatic shifting programs, the gearbox 02E fulfills the high comfort demands of the automatic gearbox driver. Furthermore it offers the manual gearbox drivers a lot of driving satisfaction through the possibility of exerting direct influence and rapid, jerk-free shiftings. Features of the gearbox 02E: • 6 forward gears + 1 reverse gear • Mechatronic (electronic and hydraulic control unit) forms a unit and is located in the gearbox. • Oil cooler and pressure oil filter mounted at the gearbox • maximum torque 350 NmEngine control unitThe gearbox actuationThe gearbox 02E offers two shifting programs: • the dynamic shifting program DSP which allows the selection of two driving styles: • Driving style „D“ for all types of driving (economic) • Driving style „S“ for sport driving (the shifting of the gears is performed at high engine speeds, at which the engine has more power) and • the shifting program Tiptronic (the manual shifting program).Pressure from 50 - 100 bar, depending on drive modePressure oil filter Oil cooler Valve limit 120 barFuel pressure sender G410 (low pressure)Fuel pressure sender G247 (high pressure)High pressure pumpSP53_28Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP53_31Two multiple disk clutches in DSG oilMechatronic26GBGB23Drive assembliesThe 1.9-ltr./77 kW TDI PD Engine with 2-valve technologyTechnical descriptionThe 1.9-ltr./77 kW TDI Engine with Pump-nozzle injection system is a further development of the 1.9-ltr./74 kW TDI Engine from ŠkodaFabia, the first generation of Škoda Octavia and Škoda Superb. • Switchable radiator for exhaust gas recirculation (only the engine with identification character BKC) • Rear crankshaft sealing flange with integrated engine speed rotor • Electrical acceleration control with touchless accelerator pedal position sender on the basis of the electromagnetic induction • Touchless clutch position sender • Electrically controlled intake manifold flap (only the engine with identification character BKC)SP53_23Innovation!Technical descriptionThe 2.0-ltr./103 kW TDI PD Engine with Pump nozzle injection system is based on the 1.9-ltr./ 96 kW TDI Engine. For ŠkodaOctavia various design innovations were carried out on the engine. In particular the cylinder head was completely reworked. • Enlargement of the displacement by increasing the size of the cylindre bore • Two camshafts driven via a toothed belt • Hydraulic supporting element operated via roller rocker arm • New pump-nozzle units • Electrically controlled intake manifold flap • New preheating system • Switchable radiator for exhaust gas recirculation • Rear crankshaft sealing flange with integrated engine speed rotorThe 2.0-ltr./103 kW TDI PD Engine with 4-valve technologySP53_22Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Technical Data Torque and power output diagramNote! Use SSP 57 for further information regarding the 2.0-ltr./103 kW TDI PD Engine.400 320Torque (Nm)100Power output (kW)Engine identification character80 60 40 20 1000 2000 3000 4000Engine speed (rpm)240 160 80 0240 160 80 0 1000 2000 3000 4000Engine speed (rpm)60 40 20 00SP53_29Fuel Emission after treatment Emission standardDiesel, min. 49 CNExhaust gas recirculation, oxidation catalytic converterPower output (kW)Torque (Nm)Design Displacement (cm3) Bore (mm) Stroke (mm) Valves per cylinder Compression ratio max. power output max. torque Engine managementBJB/BKC 4-cylinder inline engine 1896 79,5 95,5 2 19 : 1 77 kW at 4000 rpm 250 Nm at 1900 rpm Bosch EDC 16Torque and power output diagram400 320 100 80Technical DataEngine identification characterDesign Displacement (cm3) Bore (mm) Stroke (mm) Valves per cylinder Compression ratio max. power output max. torque Engine management FuelBKD 4-cylinder inline engine 1968 81 95,5 4 18 : 1 103 kW at 4000 rpm 320 Nm at 1900 rpm Bosch EDC 16 Diesel, min. 49 CNExhaust gas recirculation, oxidation catalytic converterBJB-EU3/BKC-EU4SP53_30Emission after treatment Emission standardEU424GBGB25