TECHNICAL DOCUMENTATION
SSP 066 Škoda Superb II Presentation of the vehicle part II

This PDF is currently unavailable.
Read document text
ServiceŠkodaSuperb IIPresentation of the vehicle part II66Self-study programmeThe new ŠkodaSuperb is available with a whole series of technical novelties and interesting solutions. For example, a few of them include the knee airbag on the driver's side, the rear side airbags, the park assist or the bi-xenon headlights with AFS function.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The headlights of the new ŠkodaSuperb, which extend to the wings with their unconventional design, give a dynamic appearance to the vehicle front. They represent a highly visible component and a striking dominant feature of the elegant vehicle design. The bi-xenon headlights distinguish themselves by their luminous intensity and by their functionality in combination with the new adaptive headlight system AFS (Adaptive Front Lighting System). The light adapts automatically to the optimum roadway illumination of the respective driving situation. When cornering, the headlights swivel according to the steering angle. Depending on the current driving conditions, the illuminated area in front of the vehicle changes in accordance with the detected operating mode for the city, such as the motorway or when driving in rain.GBContentsOccupant protection Heating and air conditioning system Electrical system 4 8 10Notes for the assembly and disassembly, repair and diagnosis; you will find detailed user information in the SSP, in the diagnosis unit VAS 505x and in the on-board literature. The time for going to press was on the 04/2008. This brochure is not subject to an update.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GBOccupant protectionAirbag SystemThe new ŠkodaSuperb is the first vehicle of the Škoda model range fitted with 9 airbags. The airbag system includes driver and passenger airbags, head airbags, side airbags (optional at the rear) and a knee airbag on the driver's side.• Driver and front passenger airbags• Driver side knee airbag Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permittedunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�• Driver and front passenger side airbagsSP66_21GBVolume of the airbags:• Head airbagsDriver airbag Front passenger airbag Front side airbag Rear side airbag Head airbag Driver side knee airbag 64 ltr. 120 ltr. 13 ltr. 9 ltr. 36.5 ltr. 18 ltr.• Rear side airbagsProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted SP66_23 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GBOccupant protectionRestraint systemsSeat belts All the seats of the ŠkodaSuperb II are equipped with 3 point seat belts. Both front seat belts are fitted with belt tensioners according to standard. The rear outer seats only come with seat belt tensioners in combination with the rear side airbags. The seat belt tensioners installed in the new ŠkodaSuperb II and in the model ŠkodaOctavia IIProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted SP66_71 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Coding of the rear seat belt locks The rear seat belts have coded belt locks. It is therefore not possible to insert the belt tongue into a wrong lock, which could influence the restraining function of the belts.GBHeating and air conditioning systemThe air-conditioningIn the ŠkodaSuperb II, two different air conditioning systems are used for the ventilation of the vehicle interior: - the semiautomatic heating and air conditioning system Climatic - the fully automatic heating and air conditioning system ClimatronicProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP66_15ClimaticThe Climatic semiautomatic heating and air conditioning system automatically regulates the temperature set in the interior. The air distribution is manually set by operating a rotary knob for the air distribution flaps.SP66_14GBClimatronicThe Climatronic control unit enables to regulate separately the temperature for the driver side and front passenger side in the temperature range of 18°C to 26°C. The air quality sensor AQS (Air Quality Sensor) ŠkodaSuperb II. The sensor can detect the pollutants through chemical reactions (e.g. NO, NO2, CO). The control determines, by means of an algorithm, whether fresh air or circulating air flows into the vehicle interior. Automatic mode of the air conditioning system The Climatronic functions in the AUTO mode in one of the two operating modes: AUTO HIGH or AUTO LOW. The AUTO HIGH mode regulates the quick heating or the air-conditioning of the interior. The AUTO LOW mode regulates the normal heating and ventilation. The current operating mode is displayed through lighting up of the corresponding LED.SP66_13The driver can choose between the automatic or manual operation for the inner recirculating air.Air filter of the air conditioning systemThe ventilation systems of the ŠkodaSuperb II are fitted with an air filter, which prevents harmful or unpleasantly smelling particles from penetrating into the vehicle. Vehicles with the Climatic ventilation system are equipped with a dust filter. Combi filters are used in vehicles unless with authorised the Cliby - ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� matronic ventilation system. The combi filter consists of a dust and an olfactory filter. In order for the olfactory filter to perform the function, the filter is layered with activated charcoal.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permittedGBElectrical systemOverview of the control units in the ŠkodaSuperb II1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 Engine control unit Automatic gearbox control unit Selector lever sensor control unit (automatic gearbox) Steering aid control unit ABS/ESP control unit Airbag control unit Four-wheel drive control unit (Haldex) Park assist control unit (PLA)/parking aid (PDC) Cornering light and headlight range control unit Power units for left/right headlights (bi-xenon headlights) Control unit in dash panel insert Seat and mirror position control unit on the driver's side Driver side door control unit Front passenger side door control unit Trailer detection control unit Climatronic/Climatic control unit16 Onboard supply control unit (BCM) 18 Steering column electronics control unit 19 Control unit with display device for radio and navigation system 20 Multimedia system control unit 21 Control unit for operating electronics of the mobile phone 22 TV tuner 23 Amplifier (sound system) 24 Additional heating control unit 25 Rear left door control unit 26 Rear right door control unit 27 Rain and light detection sensor 28 Wiper motor control unit 29 Alarm horn 30 Interior monitoring sensor and vehicle inclination sender 31 Right/left multi-function steering wheel button 32 Data bus diagnostic interface (GATEWAY) 33 Operating unit in the steering wheel (multi-function steering wheel)10Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GBSP66_29Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB11Electrical systemIntercommunication of the CAN data bus in the vehicleT16CAN databus diagnosis CAN databus drive CAN databus Combi CAN databus ConvenienceJxxxJ285/J362J543J583J388J386J217J389J387J587 G85G397J345J500J400 J519Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�J104G419H12J234G273/G384J255/J301J492E221J527J446/J791J668J745J667SP66_2012GBLegend:E221 Operating unit in the steering wheel (multi-function steering wheel) G85 Steering angle sender G273 Interior monitoring sensor G384 Vehicle inclination sender G397 Rain and light detection sensor G419 Sensor unit for ESP H12 Alarm horn J… Engine control unit J104 ABS/ESP control unit J217 Automatic gearbox control unit J234 Airbag control unit J255 Climatronic control unit J285 Control unit in the dash panel insert J301 Air conditioning system control unit (Climatic) J345 Trailer detection control unit J362 Immobilizer control unit J364 Additional heating control unit J386 Driver side door control unit J387 Front passenger side door control unit J388 Rear left door control unit J389 Rear right door control unit J400 Wiper motor control unit J412 Control unit for operating electronics of the mobile phone J446 Parking aid control unit (PDC) J492 Four-wheel drive control unit (Haldex) J500 Steering aid control unit J503 Control unit with display device for radio and navigation system J519 Onboard supply control unit (BCM) Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted J527 Steering column unless authorised by ŠKODA AUTO A. electronics S. ŠKODA AUTO control A. S. does unit not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� J533 Data bus diagnostic interface (GATEWAY) J543 Seat and mirror position control unit on the driver's side J583 NOx sensor control unit J587 Selector lever sensor control unit (automatic gearbox) J650 Multimedia system control unit J667 Power module for left headlight (bi-xenon headlight) J668 Power module for right headlight (bi-xenon headlight) J745 Cornering light and headlight range control unit J791 Park assist control unit (PLA) R12 Amplifier (sound system) R78 TV tuner T16 Diagnostic connectionJ533 CAN infotainmentJ503J503J650J412R78R12J364CAN data line drive CAN data line Combi CAN data line Convenience CAN data line infotainment- 500 Kbit/s - 500 Kbit/s - 100 Kbit/s - 100 Kbit/sCAN data line diagnosis LIN data line K-line- 500 Kbit/s - 19.2 Kbit/s - 10.4 Kbit/sGB13Electrical systemOnboard supply control unit (BCM)in the ŠkodaSuperb ll. This control unit combines the functions, which for example are performed by the onboard supply control unit J519 and the convenience system central control unit J393 in the model ŠkodaOctavia II, and carries out further convenience functions of the vehicle The onboard supply control unit BCM communicates with other control units by means of the CAN data bus and its own LIN bus. LIN bus: - Rain and light detection sensor - Wiper motor control unit - Alarm horn - Interior monitoring sensor and vehicle inclination sender CAN data bus: • CAN Convenience: - Steering column electronics control unit - Door control units - Climatronic/Climatic control unit - Trailer detection control unit It communicates via the data bus diagnostic interface (GATEWAY) with: • CAN Combi: - Control unit in the dash panel insert • CAN drive: - Engine control unit - Selector lever sensor control unit (automatic gearbox) • CAN infotainment: - Control unit and display device for radio and navigation system - Control unit for operating electronics of the mobile phoneProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP66_2214GBThe onboard supply control unit BCM controls the inside and outside illumination of the vehicle with its electronics. Main advantages of this use: - It switches individual bulbs on/off (separate control - each bulb has its own semiconductor). - It regulates the maximum output of the bulb voltage by means of the pulse width modulation PWM (prolonged lifetime of the bulbs). - It enables to modulate the homogeneity of the tail lights using the PWM („C“ effect). - It performs the diagnosis of the bulbs and the cable by (short-circuit to positive, short-circuit to earth and interruption of the line). - The voltage feed is automatically cut off (replacement of fuses) in case of short-circuit or interruption of the line. - It operates further convenience functions of the vehicle (e.g fog lights with the function of the turning light „Corner Light“, control of the luggage compartment flap functions etc.).Furthermore, the onboard supply control unit BCM actuates: - Relay of terminal 15 - ignition - Relay of terminal 50 - starter - Relay of terminal 75 – the deactivation of the electrical units when starting - Relay J4 for double tone horn - Relay J17 for fuel pump - Relay J9 for heatable rear window - Washing system pump motor - Control of the illumination intensity of the units in the vehicle interior The control of the central locking system is also integrated in the BCM, including the SAFE function which is carried out using the double motor locks in the doors and by actuating the fuel tank cover. A remote control sensor is a component part of this control unit, which cannot only operate the central locking but also the electrical opening/closing of the side windows, including the roof window, the opening of the small tailgate and the anti-theft alarm.Seat heatingFor a higher driving convenience, in particular during the winter months, the front as well as both outer rear seats can be optionally fitted with seat heating. The operation of the rear seat heating is performed via the operating unit in the rear middle console.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP66_18Seat heating buttonGB15Electrical systemPDC and PLA park assistthe ŠkodaSuperb II: - Rear PDC parking aid - Rear and front PDC parking aid - PLA park assist PDC parking aid The PDC parking aid is a basic version of the park assist, it helps the driver to estimate the distance of parked vehicles or other obstacles by means of ultrasonic sensors and an acoustic signal. The system consists of: - The PDC parking aid control unit, fitted on the inside of the rear right wheel case - 4 or 8 ultrasonic sensors (depending on the version of the system) - 1 or 2 loudspeakers (depending on the version of the system) - Button for the activation/deactivation of the PDC system (only the version with the rear and front parking aid) Acoustic signals The acoustic signals are transmitted by sound impulses and start at a distance of approx. 160 cm to the obstacle. If the distance to the obstacle is shortened, then the interval between the sound impulses is reduced. The sound impulse changes into a continuous tone when the distance to the obstacle has reached approx. 30 cm. Visual displayOn vehicles with a factory-fitted car radio or navigation system, it is possible to monitor the Protected by copyright. Copyingto for private or commercial via purposes, part or in whole, is not permitted distance the obstacle theindisplay. The area unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability theofvehicle isthis shown in 4 parts on the diswith respect tobehind the correctness information in document. Copyright by ŠKODA AUTO A. S.� play, of which each consists of several sections. Rear parking aid The shortening distance between the vehicle and The basic version of the PDC parking aid informs the obstacle is shown with consecutive illumination of the sections in the corresponding parts. the driver about the obstacles located behind The last thicker sections give the critical distance the vehicle. The 4 ultrasonic sensors fitted in the rear bumper are activated by shifting into reverse of the vehicle to the obstacle and are accompanied by a continuous tone. gear. The driver is given information about the distance to the obstacle by means of acoustic signals.16GBVisual display of the vehicle distance to the obstacle in the navigation system ColumbusSP66_53Rear and front parking aid A convenient version of the PDC parking aid system detects the distance to the obstacles located behind as well as in front of the vehicle. The 4 ultrasonic sensors in the rear bumper monitor the distance of obstacles behind the vehicle as in the previous version. The distance to obstacles located in front of the vehicle is monitored by 4 ultrasonic sensors which are installed in the front bumper. This system is either activated by the reverse gear or by operating the button (at a vehicle speed up to 10 km/h). The system is deactivated if the vehicle exceeds the speed of 10 km/h or the button is pressed. Button is PDC button pressed. The acoustic signals inform the driver about the obstacles located in front or behind the vehicle, as already used in the version of the rear parking aid. The two loudspeakers in the interior Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability reproduce the acoustic unless signals for the rear and with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� front parking aid. SP66_26 The loudspeaker in the front interior reproduces the acoustic signals for the obstacles located in front of the vehicle and the loudspeakers in the rear interior alert the presence of obstacles located behind the vehicle. In addition, both signals of the parking aid are acoustically separated. The The acoustic signal can be indisignal for the front parking aid has a higher pitch vidually adapted in the menu of the than the one for the rear. dash panel insert. Therefore the customer can change the pitch and the volume of the sound which notifies the distance to the obstacle.GB17Electrical systemAcoustic signals The acoustic signals in the form of sound impulses start at a distance of approx. 120 cm to the obstacle located in front of the vehicle and at approx. 160 cm to the obstacle located behind the vehicle. If the distance to the obstacle shortens, then the interval between the sound impulses reduces. If a distance of 30 cm to the obstacle located in front or behind the vehicle is reached, the sound impulse changes into a continuous tone. Visual display If the vehicle is equipped with a radio from the Škoda original accessories or the Škoda navigation system, the approaching obstacles can be monitored on the display. With this parking aid, the area around the vehicle is divided into 8 parts on the display, each 4 of the front and 4 of the rear. Just like for the version of the rear parking aid, the individual segments are divided into several sections and show the shortening distance to the obstacle with their consecutive illumination. The last thick sections give the critical distance of the vehicle to the obstacle and are accompanied by a continuous tone. Visual display of the vehicle distance to the obstacle in the navigation system ColumbusSP66_60Visual display of the vehicle distance to the Parking aid with coupled trailer Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability obstacle for the rear and parking with respect to the correctness of information in this document. Copyright by Šfront KODA AUTO A. S.� aid in the navigation system Columbus If a trailer is coupled behind the vehicle with a factory-fitted trailer device, the rear ultrasonic sensors are deactivated. The driver is notified of this with a visual display of a trailer coupled to a vehicle on the display of the radio or navigation system. On vehicles with the rear and front parking aid, the front sensors remain active and fulfill their function.The visual display of the vehicle approaching the obstacle depends on the individual versions of the radio and the navigation system.SP66_5618GBPLA park assistThe ŠkodaSuperb II is complemented with the PLA park assist as a new function. This one is an upgrade of the well-known PDC parking aid. The PLA park assist is a highly convenient assistance system on the driver side as well as on the front passenger side, which helps the driver to park lengthwise in a parking space between vehicles. The PLA system consists of: - 4 front and 4 rear PDC ultrasonic sensors - 2 lateral PLA ultrasonic sensors - PLA park assist control unit - Rear and front loudspeaker - PLA and PDC button The vehicles with a PLA system are equipped as follows: - Dash panel insert with Maxi DOT display - ESP system - Longitudinal acceleration sender G251*PLA park assist control unit Rear PDC system sensors Rear loudspeakerLateral PLA system sensorSP66_24Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Front loudspeakerFront PDC system sensors Lateral PLA system sensor* The longitudinal acceleration senders G251 are installed according to standard on vehicles with four-wheel drive and with HCC equipment (HHC = Uphill start-off assist). GB19Electrical systemFunction of the PLA system The PLA park assist detects the distance at the front and behind the vehicle by means of ultrasonic sensors and enables to park semiautomatically in longitudinal parking spaces. The PLA system carries out the following operations: - Measuring the length and the depth of longitudinal parking spaces while driving - Evaluating the parking space measurement - Determining a suitable position for parking the vehicle - Evaluating the distance for parking - automatic wheel control of the front axle with electromechanical steering assistance PLA park assist control unit Function The PLA park assist control unit processes the information from the lateral ultrasonic sensors, the ESP system and the steering angle sender. On the basis of this data, the PLA control unit calculates the parameters of the parking space and informs the driver about a suitable goingin position for the park maneuver by way of the Maxi DOT display. At the same time the PLA control unit determines the appropriate path for parking. After the calculation of the trajectory, the electromechanical steering assistance turns the wheels of the front axle while driving. The PLA control unit defines the wheel steering lock angle. The PLA control unit also fulfills the function of the PDC parking aid, which is activated by operating the button . Subsequently, the PLA park assist cannot be retrofitted on vehicles factory-fitted only with the PDC parking aid control unit - nor in the reverse order. The PLA control unit is fitted on the inside of the rear right wheel case just as the PDC control unit. The PLA control unit is connected to the CAN drive and communicates with other control units Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability via the CAN data buses. Only the communication with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� with the navigation or radio control unit is performed via the BAP protocol.SP66_58At least one object must be at the end of the parking space.The PLA park assist only carries out the wheel control of the front axle during the parking maneuver. The vehicle is moved upon actuation of the pedal by the driver.PLA park assist control unitSP66_37PLA park assist control unit20GBLateral sensors for the PLA park assist Function When the PLA system is activated 2 ultrasonic sensors, which are laterally installed in the front bumper, send signals to both sides of the vehicle interior. The ultrasonic sensors send signals and receive their reflected sound when the vehicle is moving. The distance to other objects is therefore determined from this (principally the same as for the PDC sensors). The signal range is approx. 4 metres. In order to evaluate the free space as a suitable parking space, a distance of approx. 70 cm is required in front as well as behind the vehicle. The PLA ultrasonic sensors are located in plastic holders which are mounted on the reverse side of the front bumper. The PLA sensors are larger than the PDC parking aid sensors and can therefore not be interchanged.SP66_35If the PDC parking aid is activated by the button , both lateral sensors for the PLA park assist fulfill the function of the PDC sensors, this means they notify the driver of the distance to the obstacle.SP66_36Lateral sensor for the PLA park assistProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB21Electrical systemLoudspeaker for the PLA park assist Function An acoustic sound is transmitted by the loudspeakers while determining the distance to the obstacles in the surrounding area. If the distance to the obstacle shortens, then the interval between the sound impulses reduces until a continuous tone sounds. Two loudspeakers are fitted at different points in the interior to enable the driver to better perceive whether he approaches the obstacle in front or behind the vehicle. The loudspeaker, which is fitted in the rear part of the roof, indicates the presence of obstacles located behind the vehicle. The driver hears the acoustic signals coming from the rear part of the vehicle, this subconsciously creates the impression that the approaching obstacle is indeed located behind the vehicle. The same applies to the loudspeaker in the front part of the vehicle, which is fitted behind the instrument panel near the dash panel insert. The acoustic signals coming from the front part of the vehicle notify the driver that the obstacle is located in front of the vehicle.SP66_57Rear loudspeakerProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP66_30Front loudspeaker22GBPossible use of the PLA park assist On the ŠkodaSuperb II equipped with the PLA park assist, the driver can select various assistance steps from the system when parking. Manual parking The driver parks without the aid of the park assist. The PLA park assist is not activated. The PDC parking aid must be deactivated by operating the button after engaging the reverse gear.Manual parking with the PDC parking aid The driver only parks manually with the PDC parking aid. The PLA park assist is not activated. Semiautomatic parking to the front passenger's and to the driver's side with the PLA park assist The top-level function of the PLA park assist is the semiautomatic parking of the vehicle in a longitudinal parking space. After the activation of this system, the driver only depresses the accelerator and brake pedal (including the clutch pedal on the manual gearbox), however the PLA park assist takes over the control of the parking maneuver (turning the steering wheel). The parking maneuver function is always offered according to standard for the front passenger side. If the vehicle should be parked to the driver's side, the system is informed of this by switching on the corresponding turn signal light. Parking to the front passenger's side using the PLA park assistPDC+X+ X++PLA+PLAParking to the driver's side using the PLA park assist+unless authorised Use of the PLA park assist only for the by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� search of a free parking space.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permittedAfter the activation of the PLA park assist, the driver can also use this system just to search for a suitable parking space. After the deactivation of the PLA park assist, the parking maneuver can be manually performed.PLA+?SP66_38GB23Electrical systemFunction description of the PLA park assist The function of the PLA park assist can be divided into several steps. The individual steps, according to which the driver judges the parking maneuver and the parking procedure itself, are shown on the information display of the instrument panel.Activation of the PLA park assist The PLA sensors are active after switching on the ignition and at a vehicle speed up to 30 km/h. If the sensors are active, the area on both sides of the vehicle is scanned and a parking space with the adequate dimensions is searched for simultaniously on the driver's and front passenger's side. By pressing the PLA button, the parking maneuver is activated and the schematic illustration of the parking position is shown on the information display of the instrument panel. Therefore the vehicle must keep a distance of 0.5 up to 1.5 m when moving along a row of parked vehicles. If the turn signal light is activated or not on the front passenger's side, the area on the front passenger's side of the vehicle is shown on the information display of the instrument panel. If the parking maneuver should be carried out to the driver's side, the turn signal light must be active on the driver's side. The area scanned is shown on the information display of the instrument panel.PLA buttonSP66_52SP66_25Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�24GBThe sequence of the parking maneuver When driving alongside parked vehicles, the PLA park assist searches for a suitable parking space by means of lateral ultrasonic sensors. If the PLA park assist finds a space with the adequate measurements, this is shown by way of graphic symbols on the information display of the instrument panel (fig. SP66_27). When using the PLA park assist, the dimension of the space required for parking must be approx. 1.4 m greater than the vehicle length itself. After identifying a suitable parking space for parking, drive the vehicle further forward until the graphics with the symbol for the parking maneuver is shown on the information display of the instrument panel (fig. SP66_34). At that moment it is necessary to stop the vehicle for at least 1 second. After stopping the vehicle, the driver shifts into the reverse gear and a writing is shown on the information display of the instrument panel (fig. SP66_28). As of this moment, the PLA park assist takes over the steering wheel control. The driver only depresses the brake and accelerator pedal (including the clutch pedal on the manual gearbox), with which he reverses into the selected parking space. In doing so, the driver is notified about the correct parking position by the PDC parking aid (distance to the vehicles in front as well as behind the car).SP66_34 SP66_27SP66_28Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB25Electrical systemTerminating the parking maneuver The driver is notified of the termination of the parking maneuver by a display on the information display of the instrument panel (fig. SP66_59) and at the same time by acoustic signals. If the vehicle is not correctly parked in the parking space, the system corrects the wheel angle when the vehicle is stationed after the reverse gear was disengaged, the driver can then take over the steering and compensate for this simply by driving forward.SP66_59Deactivation of the PLA park assist The PLA park assist is deactivated in the case of: - Exceeding the speed of 30 km/h while searching for a suitable parking space - Exceeding the speed of 7 km/h during the parking maneuver - Exceeding a time limit of 180 s when shifting into the reverse gear after the park assist was activated by operating the PLA button. - Exceeding a time limit of 180 s when parking - Operating the button of the PLA park assist - Activating the PDC parking aid (pressing the P button) - Switching the ESP system on or off - Intervention in the steering (holding onto the steering wheel) - Disengaging the reverse gearProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�26GBVersions of the main headlightsin the ŠkodaSuperb II. Independant fog lights are installed in both versions of the headlight according to standard. Halogene projector headlights The basic version of the main headlights are the projector headlights with H7 halogen bulbs, which use projection lenses for light scattering, similar to the xenon headlights. This projection lens is only intended for the low beam. The halogen bulb H3 which enables the main beam function, is fitted in a separate chamber and uses the reflection layer of the parabolic headlights for light scattering.SP66_79Bi-xenon headlights Bi-xenon headlights are proposed within the range of special equipment. The bi-xenon headlights employ the gas discharge lamp as a light source for the low beam and main beam. Switching over between low beam and main beam is performed by adjusting the diaphragm which is fitted in front of the gas discharge lamp. Furthermore the main beam from the gas discharge lamp is increased through lighting up of the halogen bulb H3, which fulfills here the function of an additional main beam. The halogen bulb H3 is located in a separate chamber of the headlight.SP66_80Fog lights As already mentioned, the fog lights are installed according to standard on both versions of the main headlights mentioned above and are placed in the lower part of the front bumper. These headlights can also be equipped with the function of the turning light "Corner Light" as a special equipment.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP66_81GB27Electrical system"Intelligent" headlightsGeneral characteristic A further new feature in the ŠkodaSuperb II includes the bi-xenon headlights with dynamic cornering light and the adaptive headlight system AFS for the headlights, which is introduced for the first time in the complete Škoda model range. This complete system was supplemented with the turning light "Corner Light" which is already known from the ŠkodaRoomster and the ŠkodaFabia II. As required for the xenon headlights, the complete system is equipped with automatic headlight range control (LWR) according to the regulations. Furthermore, the automatic headlight range control has been enhanced with a preventive (preventive) dynamic control on the model ŠkodaSuperb II.Dynamic cornering light with the adaptive headlight system AFS The dynamic cornering light forms a system together with the adaptive headlight system AFS. The dynamic cornering light illuminates the curves with small and large radii which is carried out by the automatic swivel of the light track for the main headlights according to the steering angle. It is Protected possible to change the light track of the low beam/main beam automatically using the adaptive by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability headlight system AFS. This way in the track can be adapted with respect to the correctness of information this light document. Copyright by Š KODA AUTO A. S.to � the driving situation via so-called light modes (e.g driving in the city or on the motorway). The function control of the dynamic cornering light with the adaptive headlight system is performed via the cornering light and headlight range control unit. Two stepper motors enable the swivelling and the correction of the light track for one headlight. One of them turns the projection lens with the gas discharge lamp and the other one inclines it. Both stepper motors are located at the main headlight. Light modes and AFS system function: - Interurban mode (C) - Interurban mode with rain function (C1) - City mode (V) - Motorway mode (E) - "Tourist light" functionPreventive dynamic headlight range control The dynamic headlight range control function ensures that the headlight inclination remains in its base or in the standard range when the vehicle is loaded or when the chassis is inclined (acceleration/delay). The way in which the body inclines is assessed by means of preventive control based on several parameters, such as the vehicle speed and the braking. Afterwards the headlight range control is actuated before the physical body inclination is performed.28GBThe conditions for the activation of the dynamic cornering light and the AFS system. The dynamic cornering light is only activated together with the AFS system in darkness and if the LDS light switch is in the position "auto". If the light switch is in the position "low beam", the AFS light modes and the dynamic cornering light function is deactivated while the headlights act as if they are fixed (do not swivel).SP66_17The conditions for activating the dynamic cornering light and the AFS light modes: - Position of the LDS light switch in the position "auto" - Low beam/main beam (activated on the basis of the information received by the light sensor regarding the outer low luminous intensity) - Function "tourist light" is not activated - Vehicle speed is higher than 10 km/h – dynamic cornering light - Vehicle speed is higher than 15 km/h – AFS light modes The headlights incline to the respective side depending on the steering angle and the vehicle speed. The individual light modes are subsequently activated depending on the vehicle speed and the time delay.The actual speed is regarded as the activation and deactivation speed and not the speedometer speed which is normally higher. If the light switch is in the position "auto", the fog lights cannot be switched on. To switch on the fog lights it is also necessary to change the light switch over into the position "marker light" or "low beam", in which the AFS light modes as well as the dynamic corner light are deactivated. If the vehicle skids, the dynamic corner light function with the adaptive headlight system AFS is deactivated and the headlights return into the basic position.GBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�29Electrical systemActivation of the individual light modes depending on the vehicle speed0 km/h C1550708090100110VCE2E1EC1SP66_49C C1 V E2, E1, E-Interurban mode Interurban mode with rain function City mode Motorway modeStandstill and reversing Legal regulations stipulate that the swivellable headlights should only be active when driving forward. When reversing, the swivellable headlights are in the so-called zero position, which means that they are directed forward parallel to the longitudinal axis of the vehicle. The system is notified of the re verse movement when the reverse gear is engaged. Reference step After the engine was started, all the headlights carry out the so-called reference step - the projection lenses of the headlights incline to their lower limit and rise to the basic set value of the inclination, whereby it is not important if the headlights are switched on. Therefore the headlights are synchronized and adjusted to the basic position for the automatic headlight range control (LWR). The reference step can be complemented by swivelling the projection lenses to the side, which can only be carried out if the vehicle is in standstill and if the low beam lights up (no daylight illumination function). This results in the following movement of the projection lenses: 1. The projection lenses incline to their lower limit. 2. They swivel outwards and return to their position. 3. They rise into the basic position.unless authorised by ŠKODA AUTO A. S. ŠKODA S. does not guarantee or acceptrange any liability The value of the basic setting forAUTO the A. automatic headlight control is -1% on the regloscope. with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permittedMalfunction of the swivelling When detecting a malfunction of the AFS/LWR system, the headlights incline in the respective position with the aid of the step motor so that no oncoming vehicle can be blinded. The driver is notified of the malfunction of the AFS/LWR system by a control light in the instrument cluster lighting up (the same control light also indicates a defective bulb).30GBCharacteristic of the light mode of the AFS system 1) Interurban mode (C) The interurban mode ressembles most likely the conventional low beam in the distribution of the light track in front of the vehicle. The interurban mode is a basic mode which is always active if no other mode is activated, which means at speeds of 0 - 15 km/h and 50 - 90 km/h.SP66_10Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB31Electrical system2) Interurban mode with rain function (C1) This function shall reduce blinding the drivers on the opposite side of the road, which occurs through the reflection on the wet roadway. The distribution of the light track in front of the vehicle is wider when carrying out this function and the range of the headlights is shortened (the projection lens on the driver's side swivels to the left side and inclines; the projection lens on the front passenger's side only inclines)*. * For vehicles intended for left-hand traffic, the lateral movement of the headlight projection lenses occurs in the opposite direction.The conditions for activating the light mode with rain function: - Position of the light switch in the position "auto" - outer low luminous intensity - Vehicle speed in the range of 15 - 70 km/h - Window wipers switched on for longer than 2 mins - Function "tourist light" is not activeProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Deactivation of the light mode with rain function occurs, if 1. the vehicle exceeds the speed of 70 km/h, 2. the window wipers are switched off for longer than 8 mins, 3. the light switch is in the position "low beam".classic low beamLow beam with rain functionSP66_45SP66_4632GB3) City mode (V) The principal purpose of the City mode is to illuminate the adjoining roadway points, such as pavements, crossings, zebra crossings etc. and therefore to increase the safety when driving through the city. The distribution of the light track in front of the vehicle is wider when using this mode. In order for drivers in the opposite direction to not be blinded when the light track is diffused, the range of the light track of the headlight is shortened (projection lens of the headlight on the driver's side swivels to the left side and inclines; projection lens on the front passenger's side remains in the basic position)*. The advantage of the City mode becomes important in villages or small towns with low street light density. This mode is active in the speed range of 15 - 50 km/h. * For vehicles intended for left-hand traffic, the lateral movement of the headlight projection lenses occurs in the opposite direction.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP66_12GB33Electrical system4) Motorway mode (E) While driving at a higher speed, for example on the motorway, it is necessary to illuminate a larger area in front of the vehicle (for example when driving in the city) and in this way enabling the driver to react in time to an obstacle or to other risks. For this reason, the light track of the motorway mode has an increased range which is diffused in such a way so that it illuminates the left track more (projection lenses of both headlights are raised; projection lens on the driver's side is slightly swivelled to the left)*. This mode was divided into several phases (E2, E1, E), which become active gradually as of a speed of 90 km/h. The light track range of both headlights increases with increasing vehicle speed. The target value range of the light track is therefore different for each headlight. Switching over from the interurban mode to the motorway mode is performed gradually so that the driver is the least disturbed. The maximum effect of the motorway mode is reached at a speed of more than 120 km/h. * For vehicles intended for left-hand traffic, the lateral movement of the headlight projection lenses occurs in the opposite direction.SP66_11Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�34GBFunction "tourist light" If the vehicle is driven in a country with opposite direction of traffic (left-hand/right-hand traffic) as originally intended, the illumination would lead to the blinding of drivers from the opposite direction of traffic which results from the range and geometry of the headlight light track on the front passenger's side. In order to avoid the blinding of drivers from the opposite direction of traffic, the vehicle is equipped with the so-called "tourist light" function. When activating this function, both headlight projection lenses incline and therefore the light track range is shortened. Furthermore, both headlight projection lenses swivel slightly to the left* (however each one at a different angle).* For vehicles intended for left-hand traffic, the lateral movement of the headlights occurs in the opposite direction.The driver can activate or deactivate the "tourist light" function electronically by setting the Maxi DOT display. The function is immediately active, this means it does not depend on a time delay nor on the vehicle speed. When the "tourist light" function is active, the AFS light modes and the dynamic cornering light are deactivated. The sporadic fault "function on left-hand/right-hand traffic active" is stored in the fault memory. After deactivating this function, the fault message is also deleted.The light track of the main beam headlights on vehicles which are driven on the opposite side of the traffic than intended The light track of the main beam headlights on vehicles which are driven on the opposite side of the traffic than intended with the function "tourist light"Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP66_43SP66_44GB35Electrical systemFog lights with the turning light function "Corner light" The "Corner light" function is integrated into the fog lights which are located in the lower area of the front bumper. Besides the standard function, the fog lights also fulfill the function of the active turning light. This function switches on the right or left fog light separately - depending on the steering angle and by switching on the turn signal lights for the relevant side. The fog lights are intended for illuminating the surrounding in front or besides the vehicle in the range of the horizontal angle of -30º up to + 60º upstream immediate direction of axle. The "Corner light" function is suppressed if the reflector is used as a fog light. The function of the "Corner light" fog lights is controlled by the onboard supply control unit BCM. The fog lights with the "Corner Light" function are static – none of their parts swivel.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP66_1636GBOperating conditions The "Corner light" function is active under the following requirements: - The vehicle engine is in operation. - The vehicle is in standstill or moves at a speed up to 40 km/h. - The low beam / main beam is switched on. - The fog lights are not switched on. The "Corner light" function can also be activated if the hazard warning light is switched on and does not depend on the position of the light switch. The lighting up of the fog lights with the "Corner light" function occurs, if - the limit steering angle was exceeded, - the turning signal was switched on. If the reverse gear is engaged, both fog lights simultanously light up using the "Corner light" function. If the right/left turn signal is switched on and the limit steering angle is exceeded in the corresponding direction, the relevant fog light lights up. When different shift versions conflict (e.g steering wheel turned to the left side and right turn signal switched on), the turn signal has priority - afterwards the corresponding fog light lights up (left/right).Control of the turning light The separate lighting up and going out of the fog lights during the "Corner light" function is controlled by the pulse width modulation of the power output signal. This results in these lights lighting up and going out in a dimmed manner, which does not disturb as much as a sudden lighting up or going out.Equipment versionsProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�1) The bi-xenon headlights are equipped according to standard with the dynamic cornering light function of the adaptive headlight system AFS and with the fog lights with "Corner light" turn signal function. The dynamic cornering light function, combined with the adaptive headlight system AFS and the turn signal function "Corner light", form a unit which ensures the optimal lighting of the roadway on which the vehicle moves and the surrounding. 2) The fog lights with integrated turn signal function "Corner light" can also be installed on fixed projection halogen headlights.GB37Electrical systemCornering light and headlight range control unit In the new ŠkodaSuperb II: MASTER SLAVE. The cornering light and headlight range control unit, the so-called MASTER control unit, is located in the interior behind the air conditioning system and is connected to the CAN bus drive. The MASTER control unit communicates via the CAN data sub bus with two "subordinate" SLAVE modules, the so-called power modules for headlights, which take over the control of the control motors. Each headlight is equipped with a SLAVE module. The complete system consists of the MASTER control unit and two SLAVE power modules.MASTER control unitSLAVE power moduleProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP66_07SP66_09The cornering light and headlight range control unit receives the required information from other control units via the CAN data bus. The cornering light and headlight range control unit evaluates the following input information: - Steering angle and steering direction - Vehicle speed - Engaging the reverse gear - if the low beam / main beam is switched on - Vehicle level sender LWR - Window wiper operation - Speed of the individual wheels - outer luminous intensity, determined by the light sensor - Position of the light switch - from the ESP system On the basis of this information, the cornering light and headlight range control unit controls the headlight swivelling and switches into the individual light modes.38GBControl overview of "intelligent" headlights in the vehicle 1) Swivellable bi-xenon headlights 2) SLAVE power module 3) MASTER control unit 4) Fog lights with integrated "Corner light" function 5) Onboard supply control unit BCM 6) Connection to CAN data bus (via GATEWAY) 7) Vehicle level sender (for detecting the longitudinal inclination of the vehicle) 8) Rain and light detection sensorSP66_08Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB39Electrical systemVersions of the dash panel insertfor the ŠkodaSuperb II, depending on the equipment range. Depending on the function, it is a new generation of the dash panel insert which differs from the previous one in particular in design and software. Brief characteristics of the dash panel inserts: - The dash panel inserts have four analogous displays (speedometer, rev counter, fuel gauge sender and temperature gauge of the coolant). - The operating pin was replaced by two operating buttons. - The display technology has a considerable higher contrast. Software modification: Integrated in the dash panel insert are: - additional warning light for front fog lights - Control unit in dash panel insert J285 - integrated immobilizer of the 4th generation with - Immobilizer control unit J362 Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted online adaptation via FAZIT server unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� - integrated characteristicswith ofrespect two to float senders The dash panel insert of the for evaluating the fuel quantity ŠkodaSuperb II does not have an integrated warning light for immobilizer in contrast to the previous Connection to the vehicle on-board power generation. supply The dash panel insert is connected to the onboard power supply of the vehicle using a 32-pin plug (blue). Plug connection, 32-pin17 11 2 3 4 7 8 9 11 15 16 17 Fuel gauge sender 1 fuel tank full Fuel gauge sender 1 fuel tank empty Fuel gauge sender 2 fuel tank full Fuel gauge sender 2 fuel tank empty Immobilizer read coil 1 Immobilizer read coil 2 Speed signal - output Oil level and oil temperature sender Front left brake wear sender Terminal 31 - input Window washing water level sender 18 19 20 25 26 27 28 29 31 32 Sender for coolant level deficiency indicator, temperature sensor for outside temperature Terminal 31 - sender gauge - output Switch for hand brake indicator Warning contact for brake fluid level Oil pressure switch CAN bus dash panel insert High CAN bus dash panel insert Low Terminal 15 - input Terminal 30 - input32 16SP66_0640GBLow line version The low line version is the basic version of the dash panel insert. As already mentioned, the unit has four analogous displays. Furthermore, it is equipped with a multi-function display in the form of a segment display (white, 240 segments), which displays the data via the onboard computer: - Outside temperature - Actual speed - Actual consumption - average consumption - remaining fuel quantity range - distance driven - average speed - Driving time - Warning for exceeding the set driving speed And further useful information such as: - time (hours and minutes) - engaged gear (only vehicles with automatic gearbox; only for the ŠkodaSuperb II GreenLine version with manual gearbox) - Service interval display - Total kilometres driven or second speed in mph* - Trip counterSP66_01Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�* Miles per hour GB41Electrical systemHigh line version The High line version of the dash panel insert originates from the Low line, however it was complemented by a few function elements as well as design elements. Differences to the Low line version: The main difference is the use of the Maxi DOT display (white, 166 x 110 points) instead of the centre segment display. Both displays differ in the fact that the segment display already has firmly etched segments which combine different predefined symbolic displays, superscripts etc. The Maxi DOT display is composed of a point matrix 166 x 110 in contrast to the segment display from which each randomly chosen graphics, pictograms (e.g arrows from the navigation system), texts (e.g information from the PLA park assist) or movable animations (e.g movement when parking the vehicle using the PLA) can be created. The Maxi DOT display also enables the display of the vehicle pictogram (the so-called Car Outline), which informs the driver in detail about the opening/closing of each individual door, the luggage compartment flap, including the two-part tailgate. Furthermore, it can display various information of the radio or mobile phone. A menu in which the desired settings of the vehicle can be carried out (e.g switching options on/off in the menu) is also a component part of the Maxi DOT display. It is also possible to carry out the activation/deactivation of the adaptive headlight system AFS via the Maxi DOT display. On vehicles with navigation system, a compass can be shown on the Maxi DOT display. A further change is the replacement of the warning lights by a symbolic display (pictogram) on the Maxi DOT display (oil pressure, oil level, brake pad) and the addition of the PLA park assist. In the field of design, the chrome trim in the upper range of the dash panel insert was changed.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP66_0242GBCar radio SwingThe car radio Swing is a basic version of the radios offered for the ŠkodaSuperb II. Basic technical data: - Power output 4 x 20 W - Wavelength range AM, FM + RDS + TP - 2 tuners for improved reception quality in the FM range with the use of the roof antenna and an antenna integrated in the rear window - Playback of the discs in the formats CD audio, CD-R, CD-RW, MP3, WMA and multisession - The connection and the operation of the system as MP3 player, Flash, iPod etc. are possible with the use of the MDI box. - Input for external audio signal (3.5 mm "Jack") - Display of information from the PDC and Climatronic as well as time and outside temperature display - Possibility of operating via the multi-function steering wheel - Possibility of connecting an external CD changer - Possibility of connecting car phone and Hands FreeSP66_32Radio BoleroThe radio Bolero is a high class of the car radios which are offered for the ŠkodaSuperb II. Basic technical data: - Power output 4 x 20 W - Wavelength range AM, FM + RDS + TP Protected by copyright. Copying for private or commercial - 2 tuners for higher reception quality in the FMpurposes, rangein part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� with the use of the roof antenna and the antenna integrated in the rear window - Playback of the discs in the formats CD audio, CDR, CD-RW, MP3, WMA and multisession - integrated CD changer with a capacity of 6 CD discs - card reader for SD/MMC memory cards - 6.5“ coloured touch display with high resolution - Possibility of storing the TMC traffic messages in SP66_31 the memory device up to a total length of 4 mins - The connection and the operation of the system as - Possibility of operating via the multi-function MP3 player, Flash, iPod etc. are possible with the steering wheel use of the MDI box. - Possibility of connecting an external amplifier - Input for external audio signal (3.5 mm "Jack") - Display of information from the PDC and Climatronic - Possibility of connecting Hands FreeGB43Electrical systemNavigation system AmundsenThe navigation system Amundsen is a basic version of the navigation system which is offered in the ŠkodaSuperb II and proposes to the customer a whole range of useful extra functions. Basic technical data: - Power output 4 x 20 W - 5“ coloured touch display with 400 x 240 resolution Radio mode: - Wavelength range AM, FM + RDS + TP - 2 tuners for higher reception quality in the FM range with the use of the roof antenna and the antenna integrated in the rear window Navigation mode