TECHNICAL DOCUMENTATION
SSP 074 1,2 CBZB 77kW TSI petrol engine with turbocharger

This PDF is currently unavailable.
Read document text
Service1.2 ltr./77kW TSI petrol enginewith turbocharger74Self-study programmeProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB1Škoda is consistently pursuing its TSI strategy and continues the successful history of its engine family with the new 1.2 ltr. TSI engine with a power output of 77kW. The technological advancements of this small but powerful engine series lie in the consistent performance optimization as well as the weight reduction of the structure. The engine, which is fitted with a new aluminum alloy cylinder block and which comprises a newly developed combustion system, distinguishes itself by the combination of the dynamic characteristics, a low consumption and low CO2 emissions. Meanwhile, the aspect of CO2 emissions has become an important factor which, amongst other things, influences the purchase decision of the customer.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�2GBContentsBrief description of the engine 4Mechanical part of the engineCylinder block Crank mechanism Pistons, conrods Chain drive for the control system and the oil pump Cylinder head Injection valves Turbocharger Cooling systems Lubrication system6 7 9 11 12 14 17 19 25 29 32 32 34 36 39 42Engine control systemSystem overview Engine control unit Charge pressure control Coolant pump control solenoid valveWiring diagramYou will find the instructions for the assembly and disassembly, repair, diagnostics and detailed user information in the workshop manuals, the diagnostic unit VAS 505x and in the onboard literature. The time for going to press was on the 10/2009. This brochure is not subject to update.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB3Brief description of the engineEngine characteristicsThe fundamental structural part of the 1.2 ltr. TSI engine is based on the 1.4 ltr. TSI engine which, amongst other things, is installed on the ŠkodaSuperb II. The development work on the 1.2 ltr. TSI engine was oriented towards the so-called "downsizing". On an engine with a smaller displacement, maximum power is achieved with minimum fuel consumption. By reducing the engine displacement, engine efficiency is increased because lower friction losses occur. Engines with a smaller displacement also have the advantage of a lower weight and thus do not have to move large masses.SP74_01Technical highlights• 2-valve technology • supercharged homogeneous charge Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted • cylinder block and made out of AUTO A.•S. turbocharger unlesscylinder authorised byhead ŠKODA AUTO A. S. ŠKODA does not guarantee or with accept any liability electrically controlled bypass Copyright by ŠKODA AUTO A. S.� aluminium alloy with respect to the correctness of information in this document. valve • crankcase ventilation integrated in the cylinder • sodium-filled exhaust valves block • mechanical coolant pump with shut-off • cast-in cylinder bushes made out of grey cast mechanism iron • holder of generator with integrated oil filter and • output of the camshaft toothed belt oil cooler • liquid-operated charge air cooler within the • divided trim panel of chain drive housing suction pipe • electromagnetic controlled injectors4GBTechnical dataEngine code Structure Number of cylinders Valves per cylinder Displacement Bore Stroke Compression ratio max. power output max. torque Control unit Fuel Exhaust after treatment Emission standardCBZB Production engine 4 2 1197 cm3 71 mm 75.6 mm 10 : 1 77 kW at 5000 rpm 175 Nm at 1500 - 3500 rpm Continental Simos 10.1 Super unleaded with octane number 95 (normal unleaded with octane number 91 with low reduction in performance) Three-way-catalytic converter; linear lambda probe before catalytic converter; snap-action lambda probe after catalytic converter EU5Power output and torque curveProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�100 90 80 70 P (kW) 60 50 40 30 20 10250 225 200 175 M (Nm) 150 125 100 75 50 25010002000 3000 4000 5000 6000 7000 n (min-1)SP74_02GB5Mechanical part of the engineEngine blockDue to the constructive measures, it was possible to reduce the engine weight of the 1.2 ltr. 77 kW TSI engine by 24.5 kg compared to the 1.4 ltr. 92 kW TSI engine. Further development work led to a reduction of friction losses and a new combustion process.1,4l 92kW TSICylinder block Crankshaft Cylinder head with valve control Chain drive housing other components-14,5kg -2,0kg -3,5kg -2,0kg -2,5kg114kg g89,5kg gProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�in total-24,5kgSP74_456GBCylinder blockThe cylinder block of the 1.2 ltr. TSI engine is made of aluminium die-cast. Compared to the cylinder block made out of grey cast iron with flake graphite, as used for the 1.4 ltr. TSI engine, the weight of the cylinder block is now reduced by 14.5 kg to 19.5 kg. The cylinder block is an open-deck design just like the one used for the 1.4 ltr. TSI engine. This means that there are no partitions between the internal wall of the cylinder block and the cylinder housing in the area of the head flange. Advantages of the structure: • The reduction of the air bubble formation can cause problems with the ventilation and cooling of the two-circuit cooling system. • When screwing the cylinder head to the cylinder block, the deformation of the cylinder is less and more uniform than in the case of a closed-deck design with partitions, due to the separation of the cylinder body from the cylinder block. As a result of this the oil consumption is reduced, because the piston rings can adapt better to this advantageous deformation.Internal wall of the cylinder blockCylinder bodySP74_28profiled cylinder bushCylinder blockCylinder bushesIn the cylinder block or cylinder body, four grey cast iron cylinder bushes are cast-in whose outside is profiled. This profile improves the quality of the connection between the cylinder body and the cylinder bushes, thereby reducing the deformation of the cylinder block. In addition, an uneven heat distribution, which occurs as Protected a result of theCopying joint for formation between the cylinder bushes and the aluminum by copyright. private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability alloy, is resolved by this solution. with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB7Mechanical part of the engineGuidance of the oil level gauge On a 1.2 ltr. TSI engine, the oil level gauge is guided through a channel drilled in the cylinder block and the cylinder head and is further guided through a feeder which includes a hole provided on the cylinder head cover.Cylinder head coverOil level gaugeCylinder headChannel for oil level gauge Cylinder blockSP74_22Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�8GBCrank mechanismThe crank mechanism consists of the crankshaft, the connecting rods, the bearing shells, the pistons and the piston pins. Numerous modifications were carried out on the crank mechanism of the 1.2 ltr. TSI engine, in order to reduce friction losses as well as the weight while at the same time increasing the strength of the crankshaft.PistonPiston ringsConrodsSP74_24CrankshaftProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB9Mechanical part of the engineCrankshaftThe forged crankshaft is fivefold mounted and fitted with only four counterbalances. The diameters of the crankshaft bearings and connecting rod bearings are the same, i.e 42 mm. The widths of the crankshaft bearings and connecting rod bearings are reduced in order to increase the rigidity of the crankshaft. The outer walls of the webs are widened in the critical bending area of the crankshaft. Optimized design for transition radii of crankshaft journals and crankpins HOE.Outer wall of web Connecting rod bearingCounterbalance Crankshaft bearingSP74_25HOE – Transition radii HOE is a technical method for transition radii of crankshaft journals and crankpins which allows an extension of the crank webs (increased rigidity of the crankshaft) with an unchanged load-bearing surface.Conventional method for transition radii Transition radii HOE transitionProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability reduced width of with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�radiusLoad-bearing surfaceLoad-bearing surfaceSP74_43SP74_4410GBPistons, conrodsPistons The pistons are manufactured in cast-iron moulds. They are made of aluminum alloy. The piston crowns are provided with indentations which have an optimized shape for the direct injection of fuel (facilitating the fuel distribution in the combustion chamber → very good mixture formation). The piston skirt has an anti-friction coating which reduces piston friction. The piston rings have a reduced tangential preload which reduces friction losses.Piston ringsPiston Circlip upper connecting rod bearingPiston pin ConrodsConrods The large conrod eyes are separated by fractures during the production, while a precise mutual fitting together of both parts of the conrods is ensured and a good frictional connection is achieved. At the same time this method of separating the conrod eyes helps to lower the costs of production.Bearing shellConrod boltSP74_03Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB11Mechanical part of the engineChain drive of the camshaft and the oil pumpThe drive of the camshaft as well as the oil pump is performed using maintenance-free toothed chains, which are driven by the crankshaft via gear wheels. A reduced noise level was achieved through the use of the toothed chain.CamshaftChain wheel of camshaftSlide barhydraulic chain tensionerProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Drive chain sprockets on the crankshaftSP74_26Clamping rail Chain wheel of oil pumpIt was possible to design the clamping rail and the slide bar with low-friction, large radii based on the 2-valve technology.The tensioning of the chain for the camshaft drive is performed using a hydraulic chain tensioner.12GBDivided trim panel of chain drive housingOn the 1.2 ltr. TSI engine, the trim panel of the chain drive housing consists of two independent parts. The top part of the trim panel is made out of plastic and is screwed to the cylinder head cover and the cylinder head. The bottom part is made out of a die-cast magnesium alloy. It is attached to the cylinder block and the cylinder head with screws made of aluminum alloy. Both parts of the trim panel can be separately disassembled.top part of the chain drive housingbottom part of the trim panel of chain drive housingSP74_21specific uncoated aluminum alloy boltsEnsure that solely the specific uncoated aluminum screws for the assembly of the bottom part of the trim panel are used.When disassembling the cylinder head, the bottom trim panel of the chain drive must not be disassembled (only remove the three screws in the cylinder head). The hydraulic chain tensioner can be loosened from the outside by mounting the chain on the cast-on section in the top part. Thus, the loosening of the chain from the chain wheel on the crankshaft is prevented. Besides helping to reduce weight, the repair of the engine is also facilitated.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB13Mechanical part of the engineCylinder headThe cylinder head of the 1.2 ltr. TSI engine is manufactured in a cast-iron mould and is made of an aluminum alloy. The cylinder head uses the two-valve technology and is designed as a cross-flow cylinder head with cooling. The changeover from the four- to the two-valve technology reduces the friction and the weight (by approx. 8.2 kg). However, this also requires a new arrangement of the injection valves and the spark plugs. The knowledge gained from the previous developments of the direct injection system in the TSI engine family, was applied to the design of a two-valve combustion process with fixed engine timing in order to meet the requirements of the mixture preparation, the charge and purging of the combustion chamber as well as the combustion rate.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP74_27The cylinder head has a roof-shaped combustion chamber and the inlet and exhaust valves are inclined at an angle of 12° to the vertical axis of the engine. The camshaft in the cylinder head cover controls the inlet and exhaust valves via roller rocker arms with hydraulic tappets. The high bore diameter/piston stroke ratio improves the charge and purging of the combustion chamber during the inlet and exhaust stroke. The valve plates of the inlet valves have a diameter of 35.5 mm and the valve plates of the exhaust valves have a diameter of 30 mm. The injection valves are installed on the inlet side of the cylinder head and the spark plugs are installed on its exhaust side.vertical engine axis Valve angle12°12°Inlet sideExhaust sideSP74_04Inlet valve - diameter 35.5 mmExhaust valve - diameter 30 mm14GBBaf fle channel in the cylinder head The shape, size and location of the inlet and outlet ducts ensure a good volumetric efficiency and a more advantageous change of the mixture in the combustion chamber. Based on the two-valve technology, a baffle channel was developed for the1.2 ltr. TSI engine in order to achieve a very good mixture formation. The suction channel has a helical shape. The air sucked into the cylinder flows through this channel in a rotative movement and a swirl motion is created in the whole cylinder. The result is an efficient mixture distribution and turbulence in the whole combustion chamber. Advantages: • improved mixture turbulence • high combustion rate • high knock resistance The two-valve swirling combustion process operates with injection pressures of less than 90 bar. This protects the material and contributes to a low noise development.Swirl motion of the in-flowing air Inlet valveSP74_05Core of the inlet ductCore of the outlet ductSP74_23Baf fle channelInlet ductInlet valvesInlet valveThe position of the inlet valve seat and the shape Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted of the inlet duct are such that the fresh air inflowunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� ing to the cylinder assists in the formation of a homogeneous fuel-air mixture in the cylinder.SP74_06flowing airSwirl motion is increasedGB15Mechanical part of the engineEngine timing Although the timing of the 1.2 ltr. TSI engine is not variable, it is set in such a way that it enables a smooth run at idle speed as well as a dynamic full throttle acceleration. Requirements for the engine timing concept: • smooth run at idle speed • maximum acceleration attained at low engine speeds Engine timing for valve stroke of 1 mm: • • • •TDCthe exhaust valve opens before BDC 8.41° the exhaust valve closes before TDC 8.10° the inlet valve opens after TDC 18.95° the inlet valve closes after BDC 13.95°BDCBDC Valve opening [mm]9,5 9 8 7 6 5 4 3 2 18.41° before BDCProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�8.10° before TDC18.95° after TDC13.95° after BDCCrankshaft angle [°] Inlet valve Exhaust valveSP74_29Implementation of the requirements: • A small valve overlap is decisive for the smooth run at idle speed and during the double injection when the catalytic converter heats up. This avoids the emitted exhaust gases being sucked again into the combustion chamber and adversely affecting the mixture formation. • To reduce the residual gas formation in the cylinder, the exhaust valves open in a range of 180° of the crankshaft angle. This will prevent the exhaust gases being sucked in again by the cylinder during the inlet stroke. • For a good full throttle acceleration at low speeds, the inlet valves must open in the range of approx. 175° of the crankshaft angle. The inlet valves close even before the piston, which travels from BDC to TDC, expels the fresh air. • For a better supply of fresh air into the cylinder, the stroke of the inlet valve was increased from 9 mm to 9.5 mm compared to the 1.4 ltr. TSI engine.16GBInjection valvesThe injection valves also have a significant influence on the mixture formation. The better the fuel propagation in the combustion chamber, the better the mixture is prepared. Magnitude of influence on the mixture formation: • Number of injection jets • Geometry and jet orientation of the individual jets • Injection time • Injection pressure Each injection valve of the 1.2 ltr. TSI engine has six individual jets just as the 1.4 ltr. TSI engine. The individual jets are arranged in such a way that an optimal spatial orientation of the individual jets is achieved over the entire area of the combustion chamber. This ensures a fast and efficient mixing with the in-flowing air. The minimum injection time was reduced in comparison with the 1.4 ltr. TSI engine. The injection pressure is regulated from 40 to 125 bar.Cylinder block Piston Injection valve with six injection jetsSP74_08GBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�17Mechanical part of the engineIntake manifold with charge air coolerA liquid-cooled charge air intermediate cooling system integrated in the intake manifold module is used for the 1.2 ltr. TSI engine as well as for the 1.4 ltr. TSI engine. The compressed and therefore warmed up charge air flows through the intake manifold into the inlet ducts via the liquid-cooled charge air intermediate cooler, where it is cooled. The coolant is pumped to the charge air intermediate cooler by a pump for the coolant after-running V50. Subsequently, the warmed up coolant flows back to the additional liquid cooler for the charge air cooling in the front part of the vehicle. The charge air cooling system is an independent cooling circuit in which the exhaust turbocharger is also integrated.cold charge airCoolant supplywarmed up charge airOutlet of the warmed up coolantliquid-operated charge air intermediate coolerSP74_1618Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GBTurbochargerThe dynamic characteristics of the charged engine depend to a large extent on the response mode of the turbocharger, this is why the volume of the induction tract was reduced between the compressor wheel of the exhaust turbocharger and the combustion chamber on the 1.2 ltr. TSI engine. In this way, the time delay for the charge pressure build-up was reduced.Turbocharger Bypass valve with electrically operated charge pressure regulator V465Air filterCharge pressure sender G31 with intake air temperature sender G299Exhaust manifoldCharge air pathThrottle valve module J338SP74_09Intake manifold pressure sender G71 with intake air temperature sender G42 Intake manifold with charge air coolerProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Differences to the 1.4 ltr. TSI engine On the 1.2 ltr. TSI engine, the charge pressure control is stepless and is carried out via an electromotive actuating element. This constructive solution replaces the use of a solenoid valve for the charge pressure control N75 and the pressure vessel. The rapid response of the electromotive actuating element greatly reduces the undesirable drop in speed of the turbocharger, for example when braking. Therefore, the circulating air valve for the turbocharger N249 is not needed.GB19Mechanical part of the engineTurbocharger module The 1.2 ltr. TSI engine has a very good response and achieves a relatively high torque already at low speeds, just as the previous TSI engines. The demands on the performance of the turbocharger are particularly high for this engine as the unit disposes of no camshaft adjustment and no variable engine timing. Thus, there is no possibility to increase the cylinder charge and therefore the charge pressure at different engine speeds via a larger valve overlap. Similarly, the purging of the remaining gas from the combustion chamber can be intensively assisted. There are relatively narrow limits for reducing the turbine geometry, because the demand on the charge pressure (required charge pressure) and thus on the exhaust gas back pressure is greater for the two-valve swirling combustion process than for a four-valve tumble-supported combustion process.electric charge pressure regulator V465Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. wheel S. does not guarantee or accept any liability Turbine with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Bypass valve Compressor wheelSP74_3620GBElectric bypass valve An instantaneous load change is a decisive quality criterion for turbo engines. The rapid and precise control of the bypass valve on the exhaust turbocharger is therefore of great importance. Instead of the previously used pneumatic actuating elements (pressure vessel), an electrically operated wastegate actuator for charge pressure control is fitted on the 1.2 ltr. TSI engine. This newly developed actuating element shows advantages with respect to previous systems in all major performance criteria. The adjustment of the bypass valve is performed by an electrically operated control motor and is therefore much faster than on the previously used solenoid valve for charge pressure control N75 and a pressure capsule. The adjustment time from stop to stop is only 80 ms. Another advantage is that the bypass valve can be adjusted to each position at any time. As a result of this, the minimum charge pressure in front of the throttle valve can be decreased by about 0.03 MPa. This leads to less pumping work and the fuel consumption in the partial load range drops noticeably.electric charge pressure regulator V465Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Bypass valveGB21Mechanical part of the engineIt functions as follows A certain amount of charge pressure is required depending on the torque demand. The bypass valve remains closed until this required charge pressure is reached. Thus, the total exhaust flow is directed towards the turbine wheel and drives it. The turbine wheel is connected to the compressor wheel of the fresh air side via a common shaft. This compresses the drawn-in air until the required charge pressure is reached.Bypass valve is closed Bypass valve electric charge pressure regulator V465Exhaust manifoldSP74_10Once the required charge pressure is reached, it is maintained by opening and closing the wastegate. It is possible to set the wastgate in any position, fully opened to completely closed, using the electrically operated control motor. When the bypass valve opens, a portion of the exhaust flow is guided past the turbine wheel. The wider the bypass valve opens, the more exhaust flows past the turbine wheel without driving it. Thus the speed of the two turbine wheels, which are connected, decreases. The drawnin air is no longer as densely compressed and the charge pressure drops.Bypass valve is openedProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP74_11Another advantage is that the electric actuating element exerts an operating force on the bypass valve up to three times greater than the previously used solenoid valve for charge pressure control N75 with pressure vessel. Through this, the bypass valve can be kept completely closed, for example, even under unfavourable pressure fluctuations in the exhaust manifold. This is how the required charge pressure can also be maintained constant even during fast acceleration.22GBVenting the crankcaseVentilation of the crankcase Purging of the crankcase is ensured by the crankcase ventilation and thus the formation of water in oil is reduced. The ventilation is performed via a hose leading from the air filter to the cylinder head cover. The non-return valve ensures a continuous air supply and prevents direct and unfiltered suction of the so-called blow-by gases from the crankcase. The non-return valve also has a safety function. If there is an overpressure in the crankcase, the non-return valve opens, preventing in this way that the gasket will be damaged by the overpressure.SP74_32Air supply from the air filterVenting the crankcase On the 1.2 ltr. TSI engine, the crankcase venting system is integrated in the cylinder block and the cylinder head. The gases flowing out of the crankcase (the Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted so-called blow-by gases) are directed through a unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness information in this document. Copyright by ŠKODA AUTO A. S.� chamber system which isofintegrated in the cylinder block. This is where the oil is separated from the gases. Next, the gases flow into the cylinder head and the cylinder head cover and from there into the intake manifold in front of the compressor wheel in the turbocharger.Pipe line of the blow-by gasesPipe line of the blowby gases to the intake manifoldSP74_33 GB23Mechanical part of the engineOil separator On combustion engines the pressure differences between the combustion chamber and the crankcase produce air flows, the so-called blow-by gases, between the piston rings and the cylinder running surface. These oleiferous blow-by gases are lead back again via the crankcase venting system into the suction area so that they do not escape into the ambient air and pollute the environment. The blow-by gases contain harmful oil particles which must be effectively separated. On the 1.2 ltr. TSI engine, this is ensured by the oil separator which is integrated in the cylinder block. A large part of the oil separator consists of a plastic housing which is bolted to the cylinder block. The other part of the oil separator is directly integrated in the cylinder block.part of the oil separator integrated in the cylinder blockSP74_34Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted Plastic housing of the oil separator unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�24GBCooling systemsThe 1.2 ltr. TSI engine has two independent cooling systems, except for two connection points, just as the 1.4 ltr. TSI engine. One system for cooling the engine as always and a second one for cooling the charge air. A common expansion reservoir can be installed using the two connection points. The temperature difference between the engine cooling system and the charge air cooling system can be up to 100°C.Engine cooling system • mechanical coolant pump with shut-off mechanism • Two-circuit cooling system for various coolant temperatures in the cylinder head and the cylinder block (two thermostats) • Coolant distributor housing with two thermostatsCharge air cooling system • electrical pump for coolant circulation V50 • liquid-operated charge air cooler within the suction pipe • Cooling of the exhaust turbochargerbLegend a b c Expansion reservoir Heat exchanger for heating electrical pump for coolant circulation V50 d liquid-cooled charge air cooler within the suction pipe e Thermostat 1 for the cylinder head f Thermostat 2 for the cylinder block g mechanical coolant pump with shut-off mechanism h Exhaust turbocharger i Additional cooler of charge air system j Cooler k Non-return valve l Throttle m Oil coolera kc g k f d emhlCharge air cooling system Engine cooling systemi jSP74_12Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Venting the cooling system takes place either with the cooling system filling device -VAS 6096- or via the controlled function "fill up and vent cooling system". Please observe the instructions in ELSA during all service work.GB25Mechanical part of the engineEngine cooling system The 1.2 ltr. TSI engine uses a proven two-circuit cooling just as the 1.4 ltr. TSI engine. The separate flow of the coolant in the cylinder head and the cylinder block enables a different control of the temperature in both components. The coolant flow is controlled by two thermostats in the coolant distributor housing. One thermostat for the cylinder head and another one for the cylinder block.The two-circuit cooling system has the following advantages: • The cylinder block is more rapidly heated, because the coolant will remain in the cylinder block until it reaches 87°C (the fast heating up of the cylinder walls reduces the emissions of hydrocarbons). • The higher temperature level in the cylinder block leads to less friction in the crank assembly. • The lower temperature level (87°C) in the cylinder head allows a better cooling of the combustion chambers. This ensures a better filling, a lower risk of engine knocking and fewer nitrogen oxide emissions.The thermostat for the cylinder head opens at 80°C.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�The thermostat for the cylinder block opens at 87°C.Vacuum linemechanical coolant pump with shut-off mechanismSP74_35In order to further reduce the energy or fuel consumption and therefore the CO2 emissions on the 1.2 ltr. TSI engine, a mechanical coolant pump with shut-off mechanism is used, which does not deliver any coolant into the circuit during the warming-up phase. For that reason, the inflow of coolant in the cylinder block and the cylinder head is closed off, vacuum-operated, using a bezel.26GBMechanical coolant pump with shut-off mechanism On the 1.2 ltr. TSI engine, a mechanical coolant pump with shut-off mechanism is fitted for quickly warming up the fuel to operating temperature. Therefore the coolant pump is not switched on during the warming-up phase of the engine until the temperature of 87°C is reached. In such a way, the coolant does not circulate in the whole engine circuit and the engine reaches the operating temperature quicker, which in turn positively influences the fuel consumption, the CO2 emissions and the exhaust gas quantity.SP74_13electromagnetic control valve for mechanical coolant Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODAN513 AUTO A. S. does not guaranteepump or acceptwith any liability coolant pump shut-off with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� mechanismFunction Coolant pump - without coolant delivery: The control valve for the coolant pump N513 is actuated by the engine control unit and opens to allow the supply into the intake manifold. A diaphragm, which is connected to the control spool via the piston rods, is actuated by the vacuum generated from the intake manifold. The control spool moves towards the fan wheel of the pump through the vacuum effect and thus blocks the coolant supply from entering the engine circuit.Vacuum line to the electromagnetic control valve for coolant pump N513 DiaphragmPiston rod Control spool Fan wheelSP74_14the coolant flow is closed off by the control spoolGB27Mechanical part of the engineCoolant pump - with coolant delivery: The engine control unit closes the control valve for coolant pump N513 and no vacuum is exerted on the diaphragm of the pump. The springs press the diaphragm and thus the connected control spool into the initial position. The fan wheel of the pump is loosened and the coolant is delivered back into the engine circuit. In order to switch the coolant pump on again, the valve N513 is closed and opened several times per second at an interval of approx. seven seconds. This ensures that the control spool does not straddle when it is pushed back and the fan wheel is not completely loosened.SpringControl spoolSP74_15the fan wheel delivers the coolant into the circuit total coolant flow rateProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�28GBLubrication systemDuocentric oil pump The duocentric oil pump is located under the cylinder block and is driven by the crankshaft via a maintenance-free toothed chain drive. The pressure control in the oil circuit is performed via a dual piston valve with spring. The oil pressure in the engine is regulated by three forces which act on the valve: - Spring force - Force of the oil at the pump outlet - Force of the oil in the main oil duct in the cylinder block With this control system, the oil pressure in the lubrication system is almost independent of the degree of oil filter clogging and at the same time the oil pulsations in the lubrication system are reduced.SP74_31Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Force of the oil from the main oil duct in the cylinder blockSP74_48Spring forceForce of the oil at the pump outletGB29Mechanical part of the engineOil filter: Spin-on cartridge filter On the 1.2 ltr. TSI engine, the oil filter is secured to the holder of the generator and is very well positioned for the service work. During a filter change, the so-called spin-on cartridge filter including a diaphragm valve and a non-return valve ensure that the oil from the filter area flows back into the oil pan via a channel in the holder of the generator and in the cylinder block. This prevents the oil from getting onto the exterior surface of the engine below the filter and primarily onto the three-phase generator.Oil filterProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability SP74_51 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Holder of generatorOil filter elementBypass valveNon-return valvespecial attachment for draining the oil from the area below the oil filter when changing the filterDiaphragm valveChannel for the return flow of oil into the oil panSP74_4930GBDisc-type oil cooler The oil cooler as well as the oil filter is fixed to the holder of the generator. The coolant is supplied (hose-free) to the oil cooler - from the cylinder head through a channel located in the holder of the generator. The coolant from the oil cooler is discharged through a hose. The oil is supplied to the oil cooler and is discharged by means of channels leading from the cylinder block into the holder of the generator. The oil which flows into the oil filter is already cooled.Holder of generator The holder of the generator is equipped with a system of channels leading to the oil and coolant lines.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Holder of generatorExit of the filtered out oil for the bearing lubrication of the turbochargerOil supply to the oil coolerCoolant supply to the oil coolerEntry of the unfiltered oilSP74_50Channel for draining the oil into the oil pan when changing the oil filter cartridgeEntry of the filtered out oil into the cylinder blockGB31Engine control systemSystem overviewSensorsIntake manifold pressure sender G71 with intake air temperature sender G42 Charge pressure sender G31 with intake air temperature sender G299 Engine speed sender G28Hall sender of camshaft G40 Throttle valve control module J338/ Throttle valve drive angle sender 1 G187/ Throttle valve drive angle sender 2 G188 Accelerator pedal position sender G79/ Accelerator pedal position sender 2 G185 CAN data bus of drive train GATEWAY J533 Diagnostic connectionGBClutch position sender G476Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Brake pedal position transmitter G100Fuel pressure sender - high pressure G247Knock sensor 1 G61Coolant temperature sender G62Radiator outlet coolant temperature sender G83Lambda probe G39Lambda probe after the catalytic converter G130 Pressure sensor for brake booster G294Oil level and oil temperature sender G266 Position sender for charge pressure regulator32ActuatorsFuel pump control unit J538/ Fuel pump G6Injection valves N30, N31, N32, N33 Engine control unit J623 with ambient pressure senderIgnition module N152Throttle valve control module J338/ Throttle valve drive for electric throttle control G186Current monitoring relay for engine components J757Fuel pressure control valve N276 Control unit in dash panel insert J285Activated charcoal filter system solenoid valve N80CAN data bus dash panel insertLambda probe heater Z19Bulb failure warning light of right brake and tail light K132Exhaust gas warning lamp K83Lambda probe heater 1 after catalytic converter Z29electromagnetic control valve for coolant pump N513electric charge pressure regulator V465Additional coolant pump relay J496/ Pump for coolant circulation V50SP74_19Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB33Engine control systemThe engine control unit J623The 1.2 ltr. TSI engine is equipped with the engine control unit Continental Simos 10.1. Compared to the 1.6 ltr. FSI engine, additional functions include for example the charge pressure control, a Winter Driving Program, the circulation pump control and the snap-action lambda probe control. The engine runs in three operating modes: • Supercharged homogeneous charge • Double injection at full load • Double injection catalytic converter heatingSP74_20The emission-related faults are indicated by the exhaust gas warning lamp K83 and the functional faults in the system are indicated by the bulb failure warning light of right brake and tail light K132.When the vehicle is stationary, the engine speed is limited to approx. 4000 rpm to protect the clutch.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�34GBInjection controlFuel high pressure pumpFuel supply Engine control unitSP74_17Fuel railInjection valvesDouble injectionIdle to full load up to 3000 rpmCatalytic converter heatingDouble unless injection full load Double injection authorisedat by Š KODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability catalytic converter heatingwith respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permittedAn undesirable, uneven mixture distribution partially occurs on engines with direct petrol injection at speeds up to 3000 revolutions per minute and at full load. This is prevented by a targeted double injection and in addition a torque increase of 1 to 3 Nm is achieved. Furthermore, the double injection leads to a more even mixing (homogeneity) of the fuel-air mixture and thus to a better combustion. The injection cycles are performed in the double injection mode from idle up to full load and at a speed of maximum 3000 revolutions per minute.Here, the double injection ensures a faster heating of the catalytic converter (homogeneous catalytic converter heating). In this way, the catalytic converter reaches its operating temperature more quickly, thus increasing the smooth running of the engine after a cold start and furthermore reducing the emissions of hydrocarbons (HC). Therefore, the homogeneous catalytic converter heating leads to an overall improvement of the exhaust gas quality and a reduction of the fuel consumption.GB35Engine control systemCharge pressure controlThe charge pressure control determines the air mass which is compressed by the exhaust turbocharger and guided into the cylinder. Two intake manifold pressure senders, each one comprising an intake air temperature sender, are combined in the intake system for a relatively precise charge pressure control.electric charge pressure regulator V465 with position sender for charge pressure regulatorCharge pressure sender G31 with intake air temperature sender G299Ambient pressure sender in the engine control unitSP74_41Intake manifold pressure sender G71 with intake air temperature sender G42Intake manifold pressure sender G71iswith Charge pressure sender G31 with intake airby copyright. Protected Copying for private or commercial purposes, in part or in whole, not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability intake air temperature sender G42 temperature sender G299 with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� The charge pressure is controlled with the charge pressure sender G31. The intake air temperature sender G299 serves as a correction value for the charge pressure, whereas the temperature influences the density of the charge air. This sensor also has a safety function: the charge pressure is down-regulated for the protection of the components if the temperatures are too high. The air mass behind the charge air cooler is calculated by the engine control unit using the intake manifold pressure sender G71 with the intake air temperature sender G299. Depending on the calculated air mass, the charge pressure is adapted according to the performance map and increased to a definite pressure of 2.1 bar.36GBAmbient pressure sender The ambient pressure sender is integrated in the engine control unit and measures the surrounding air pressure. This is used as a correction value for the charge pressure control, whereas the density of the suctioned air decreases with increasing height.The course of the charge pressure control The engine control unit calculates the value needed for the charge pressure based on the required torque. If the actual value of the charge pressure differs from the specified value, the electric charge pressure regulator V465 either opens the wastegate flap more (the charge pressure drops) or closes it more (the charge pressure rises).SP74_42Bypass valve is closedElectric motor with ad-Engine control unitThe electric charge pressure regulator V465 is justment mechanism not energized. In order to determine the required charge presLinkage of sure, the engine control unit calculates the disthe bypass valve tance needed to adjust the bypass valve and operates the electric charge pressure regulator or its electric motor using theProtected PWMby signal. copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised byadjustŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability In order to determine the distance for with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� ing the flap of the bypass valve and thus set the required charge pressure, a position sender for charge pressure regulator is installed in the electric charge pressure regulator V465. A Hall sender is connected to the adjustment mechanism via a lever arm.SP74_46Hall senderPermanent magnetsGB37Engine control systemBypass valve is opened The electric charge pressure regulator V465 is energized. The spring presses the permanent magnets against the lever arm, which operates the bypass valve together with the linkage. Both magnets move past the Hall sender each time the bypass valve is adjusted. The encoder electronics or the engine control unit determines the position of the adjustment mechanism according to the intensity of the magnetic field and thus the position of the bypass valve as well.Lever arm Engine control unitLinkage opens the flap of the bypass valveSP74_47Hall senderSpringProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�38GBCoolant pump control solenoid valve N513The coolant pump control solenoid valve N513 is fixed to the side wall of the intake manifold module. Function The solenoid valve N513 is operated by the engine control unit using the PWM signal. According to this signal, the valve opens or closes the entry into the intake manifold and thus controls the vacuum, which determines the activation and deactivation of the coolant pump. Influence of signal failure When the solenoid valve N513 fails, the coolant pump can be activated and deactivated as needed.SP74_37electromagnetic control valve for coolant pump N513If the coolant pump is deactivated in case of failure of the solenoid valve N513, the coolant temperature rises to unacceptable levels as no coolant circulation is ensured in the engine circuit. The exhaust gas warning lamp K83 lights up in the dash panel insert. If the coolant pump is activated in case of failure of the solenoid valve N513, the heating up of the coolant or the engine to operating temperature takes longer.Intake manifold modulemechanical coolant pump with shut-off mechanismProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB39Engine control systemIgnition module N152 The ignition module N152 serves to build up and control the high voltage for the spark plugs and is screwed onto the intake manifold module. Function The ignition module has the task to ignite the mixture in the cylinder at the right moment (the so-called ignition angle) by means of the spark plugs. The ignition angle is separately controlled for each cylinder. Influence of signal failure In case the ignition module fails, the engine switches off. The fault is entered in the fault memory of the engine control unit and the exhaust gas warning lamp K83 lights up in the dash panel insert.Intake manifold moduleIgnition module N152SP74_38Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�40GBNotesGBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�41Wiring diagramWiring diagramJ519 J681SSSSSSSSSSV192 N80 N513 N276 G39 Z19 G130 G100Z29G476T60/35T60/19T94/78T94/56T94/57T94/62T94/34T94/43T94/10T94/92T94/24 T60/23V50T60/25T60/7T60/22T60/8T60/57T60/54T60/53T60/29T60/40G247 G61 G31 G299N152G62G40A G1 G28 G31 G39 G40 G42 G61 G62 G71 G79 G83 G100 G130Battery Fuel gauge Engine speed sender Charge pressure sender Lambda probe Hall sender of the camshaft sensor Intake air temperature sender Knock sensor 1 Coolant temperature sender Intake manifold pressure sender Accelerator pedal sender Coolant temperature sender at radiator outlet Brake pedal position transmitter Lambda probe after the catalytic converterG185 G186 G187 G188 G247 G294 G299 G476 J338 J519 J533 J538 J623Accelerator pedal position sender 2 Throttle valve drive Throttle valve drive angle sender 1 Throttle valve drive angle sender 2 Fuel pressure sender - high pressure fuel pressure sender Pressure sensor for brake booster Intake air temperature sender 2 Clutch position sender Throttle valve module Onboard supply control unit Data bus diagnostic interface (GATEWAY) Fuel pump control unit Engine control unitT60/39AT60/10T94/1T94/2Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee J623 or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�T94/19T60/20T94/79T94/29T94/7SP74_3942GBJ519SSSJ533 N30 N31 N32 N33 G G6 J538 S G7 G185T94/3+5T60/31T60/33T60/48T94/30T94/83T94/35T94/82T94/61T94/81T94/68J338J285 J285G1T60/32T60/49T60/47T60/34T60/46T60/43T60/45T60/60T60/36T60/51T60/17T60/16T60/12T60/41T60/44T60/13T60/42T60/55T60/27T94/36T94/14T94/58G71 G42V465G28G83G294T94/13G187G188G186T60/24J623J681 Voltage supply relay, terminal 87 N30-33 Injection valve for cylinders 1-4 N80 Activated charcoal filter system solenoid valve N80 Activated charcoal filter system solenoid valve Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted N152 Ignition module unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability N276 Fuel pressure control valve with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� N513 Coolant pump control solenoid valve S Fuse V50 Cooling fluid pump for after-cooling V192 Brake vacuum pump V465 Electric charge pressure regulatorPlus Earth Input signal Output signal CAN data busGBT94/67T94/11SP74_4043List of Self-Study Programmes so farNo.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50TitleNo.TitleMono-Motronic 51 2.0 ltr./85 kW petrol engine with balancing shaft and Central locking two-stage suction line Vehicle alarm 52 ŠkodaFabia; 1.4 ltr. TDI engine with unit injection Working with electrical plans system ŠKODA FELICIA 53 ŠkodaOctavia; Vehicle presentation Safety of the ŠKODA vehicles 54 ŠkodaOctavia; Electrical Components Principles of ABS - not published 55 FSI petrol engines; 2.0 ltr./110 kW and ABS - FELICIA 1.6 ltr./85 kW Protection against starting with transponder 56 Automatic gearbox DSG-02E Air conditioning in the vehicle 57 Diesel engine; 2.0 ltr./103 kW TDI with pump-nozzle Air conditioning FELICIA unit, 2.0 ltr./100 kW TDI with pump-nozzle unit 1.6 engine - MPI 1AV 58 ŠkodaOctavia, Chassis and electromechanical Four-stroke diesel engine power-assisted steering Power-assisted steering 59 ŠkodaOctavia RS, 2.0 ltr./147 kW FSI turbo engine ŠKODA OCTAVIA 60 2.0 ltr./103 kW 2V TDI diesel engine; solid particle 1.9 ltr. TDI diesel engine filter with additive ŠKODA OCTAVIA Convenience electronic system 61 Radio navigation systems in the Škoda ŠKODA OCTAVIA mech. gearbox 02K, 02J 62 ŠkodaRoomster; Vehicle presentation – part l 1.6 ltr. and 1.8 ltr. petrol engines 63 ŠkodaRoomster; Vehicle presentation part ll Automatic gearbox - fundamentals 64 ŠkodaFabia II; Vehicle presentation Automatic gearbox 01M 65 ŠkodaSuperb II; Vehicle presentation part l 1.9 ltr./50 kW SDI diesel engines, 66 ŠkodaSuperb II; Vehicle presentation part ll 1.9 ltr./81 kW TDI 67 2.0 ltr./125 kW TDI diesel engine with Common Rail 1.8 ltr./110 kW and 1.8 ltr./92 kW petrol engines injection system OCTAVIA, CAN BUS data logger 68 1.4 ltr./92 kW TSI petrol engine with turbo drive OCTAVIA - CLIMATRONIC 69 3.6 ltr./191 kW FSI petrol engine OCTAVIA - Vehicle safety 70 All-wheel drive with Haldex coupling of the OCTAVIA - 1.4-ltr./44 kW engine and gearbox 002 lV generation OCTAVIA - ESP - fundamentals, design, functions 71 ŠkodaYeti; Vehicle presentation part l OCTAVIA 4 x 4 - all-wheel drive 72 ŠkodaYeti; Vehicle presentation, part ll 2.0 ltr. 85 kW and 88 kW petrol engines 73 LPG system in Škoda vehicles Radio navigation system - design and function 74 1.2 ltr./77kW TSI petrol engine with turbocharger ŠKODA FABIA - technical information ŠKODA FABIA - electrical units ŠKODA FABIA - electro-hydraulic power-assisted steering Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted 1.4-ltr. - 16 V 55/74 kW AUTO petrol engines unless authorised by ŠKODA A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to correctness ofUnit information in this document. Copyright by ŠKODA AUTO A. S.� ŠKODA FABIA -the 1.9 ltr. TDI injection Mechanical gearbox 02T and 002 ŠkodaOctavia; model 2001 Euro-On-Board-Diagnosis Automatic gearbox 001 Six-speed gearbox 02M ŠkodaFabia - ESP Emissions in the exhaust gases Extended service intervals Three-cylinder petrol engines 1.2 ltr. ŠkodaSuperb; Vehicle presentation; part l ŠkodaSuperb; Vehicle presentation; part ll ŠkodaSuperb; 2.8-ltr./142 kW V6 petrol engine ŠkodaSuperb; 2.5 ltr./114 kW TDI V6 diesel engine ŠkodaSuperb; automatic gearbox 01VOnly for the internal use in the service network ŠKODA. All rights reserved. Subject to technical modification. S00.2002.74.20 GB Technical status 10/2009 © ŠKODA AUTO a.s. http://portal.skoda-auto.com44This paper was made out of chlorine-free bleached cellulose.GB74