TECHNICAL DOCUMENTATION

SSP 088 Brake and stabilisation systems

PDFEN56 pages5 MB
SSP 088 Brake and stabilisation systems - PDF cover

This PDF is currently unavailable.

Read document text
Brake and stabilisation systemsSelf-study programmeProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�ŠKODA Service®88 IntroductionNowadays, a motor vehicle driver encounters more often crisis situations, which he cannot always solve himself with his skills and experience. Crisis situations often arise for the following reasons: • increasing traffic density and speed on the roads; • climatic conditions; • technical condition of the vehicle. During the last thirty years, vehicle manufacturers and brake system suppliers have reacted to this situation with the development of braking and stabilisation systems that help the drivers to master some of the crises situations. These systems, together with seat belts and airbags, are among the most important elements of active safety.Myths about safety systems There are a lot of rumors circulating among the general public because of poor information about the operating principle of the assist systems. The most common myths include the following false statements: • the ABS system increases the braking distance; • the ABS system can be replaced by rapid, intermittent braking; • the interventions of the ESC system are premature and inaccurate; • the ESC system solves every critical driving situation for the driver.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP88_052GB Contents1.Importance of the braking and stabilisation systems ........................................................................................................ 5 1.1. Increased active vehicle safety .............................................................................................................................................................................5 1.2. Assisted driving and increased driver comfort ...................................................................................................................................5 2. Elements of active vehicle safety .......................................................................................................................................... 6 2.1. Braking and stabilisation systems as design elements of active safety..............................................................................6 2.2. Importance of the braking and stabilisation systems in road safety .................................................................................... 7 3. Categories of the braking and stabilisation systems .......................................................................................................9 3.1. Overview of the braking and stabilisation systems .........................................................................................................................9 3.2. Hierarchy of the braking and stabilisation systems ......................................................................................................................10 3.3. Application of the systems depending on the driving mode ....................................................................................................11 4. Fundamentals of vehicle dynamics .......................................................................................................................................12 4.1. Circle of frictional forces ............................................................................................................................................................................... 12 4.1.1. Straight-ahead position of the vehicle ............................................................................................................................................... 13 4.1.2. Cornering ........................................................................................................................................................................................................... 13 4.2. Tyre slip .................................................................................................................................................................................................................. 14 4.3. Braking path ....................................................................................................................................................................................................... 15 5. Sensor ....................................................................................................................................................................................... 16Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted 5.1. Sensor logic of the braking and stabilisation systems .................................................................................................................16 unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liabilitywith respect to the correctness of information in.............................................................................. this document. Copyright by ŠKODA AUTO A. S.�17 5.2. Sensors used in the circuits of the braking and stabilisation systems5.3. Communication protocol ..............................................................................................................................................................................19 6. Antilock braking system (ABS)..............................................................................................................................................20 6.1. Functional requirements of the ABS .....................................................................................................................................................20 6.2. Vehicle behaviour without ABS ..............................................................................................................................................................20 6.3. Vehicle behaviour with ABS ......................................................................................................................................................................20 6.4. ABS system components ............................................................................................................................................................................ 21 6.5. ABS hydraulic diagram.................................................................................................................................................................................. 22 6.6. ABS operating principle ............................................................................................................................................................................... 23 7. Electronic braking force distribution (EBV) ........................................................................................................................25 8. Cornering brake control (CBC) ............................................................................................................................................... 27 9. Influence of the yaw moment (GMB)....................................................................................................................................28 10. Traction control system (TCS) .............................................................................................................................................29 10.1. Arrangement .................................................................................................................................................................................................... 29 10.2. TCS function ....................................................................................................................................................................................................30 11. Engine towing torque control (MSR)................................................................................................................................... 31 11.1. Functional description ..................................................................................................................................................................................31GB3 12. Electronic stability control (ESC).........................................................................................................................................32 12.1. Vehicle path with stability control ESC............................................................................................................................................... 32 12.2. Hydraulic diagram ESC ................................................................................................................................................................................ 34 13. Electronic differential lock (EDL).........................................................................................................................................35 13.1. EDL operating principle ...............................................................................................................................................................................36 14. Extended differential lock (XDL) ........................................................................................................................................37 14.1. Arrangement......................................................................................................................................................................................................37 14.2. Function ..............................................................................................................................................................................................................37 15. Hydraulic brake assist (HBA) ................................................................................................................................................38 15.1. Arrangement .....................................................................................................................................................................................................38 15.2. Functional description HBA ....................................................................................................................................................................39 16. Overboost (FBS)...................................................................................................................................................................... 40 17. Hydraulic brake booster (HBB) ............................................................................................................................................. 41 18. Trailer Stability Assist (TSA).................................................................................................................................................42 19. Dynamic steering response for improved stability of the vehicle (DSR)..................................................................43 20.1. Functional description ............................................................................................................................................................................... 43 20. Hill Hold Control (HHC) ......................................................................................................................................................... 44 21. Brake-disc wiper system (BSW) ..........................................................................................................................................45 22. Tyre pressure monitoring (TPM) ........................................................................................................................................ 46 22.1. Functional description ...............................................................................................................................................................................46 23. Hill descent control (Offroad) ..............................................................................................................................................47 23.1. Activation conditions .................................................................................................................................................................................. 47 23.2. Deactivation conditions............................................................................................................................................................................ 47 23.3. Hill descent control - activation of function ..................................................................................................................................48 23.4. Hill descent control - driving over cross-sleepers ......................................................................................................................48 24. ABS Offroad .............................................................................................................................................................................49 25. EDL Offroad ..............................................................................................................................................................................50 26. TCS Offroad .............................................................................................................................................................................. 51 27. Legislation for brake assist systems .................................................................................................................................52 Vocabulary ......................................................................................................................................................................................53Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�4GB 1. Importance of the braking and stabilisation systems1.1. Increased active vehicle safety– – – – – shortening the braking distance of the vehicle brake pressure build-up in crisis situations (e.g. during frequent or prolonged hard braking) improved steering ability improved driving stability of the vehicle improved traction of the vehicle1.2. Assisted driving and increased driver comfort– – – – Hill ascent assist brake-disc wiper system tyre pressure monitoring assisted driving on unpaved roads and off-roadAccording to a study conducted by the Volkswagen Group in 2004, it was estimated that equipping all vehicles with an ESC system would have the following advantages: – reduction in road fatalities by 35%, – reduction in road fatalities by 25%.SP88_01SP88_02SP88_03SP88_04Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB5 2. Elements of active vehicle safety2.1. Braking and stabilisation systems as design elements of active safetyThe braking and stabilisation systems described in this brochure contribute significantly to an increase in vehicle safety. These design components directly affect the operation of the vehicle and the vehicle control in road traffic. Therefore, these complex systems help us to avoid traffic accidents. Such vehicle parts belong to the group of active safety. Passive safety systems ensure the safety of occupants and protect them from serious injuries. They reduce the risk of accidents and their consequences. One example of a passive safety element is the airbag, which protects the occupants of the vehicle, if the systems of active safety could not prevent an accident.*Road safetySurroundingsVehiclePeopleActive safetyPassive safetyProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability Driving characteristics with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Outside safetyInterior safetyControl elements improving driver visibility Impact behaviour of the external vehicle body shape Interior restraint system of the steering column* The passive safety elements are addressed in the workshop teaching aid SSP78.6GB 2.2. Importance of the braking and stabilisation systems in road safetyActive safetyPeopleVehicleOutside influencesConditionVisibility IlluminationWeather Road conditionConcentration AttentionBrakes Acceleration DynamicsTraffic regulation Signs SignalsSkills ExperienceConvenience Interior noiseTraffic densityOperationProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB7 Passive safetyPersonal protectionProtection of other traffic participantsDriver protectionPassenger protectionPedestrians CyclistsOccupant protectionImpact zonesRestraint systems AirbagsPassenger compartmentProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�8GB 3. Categories of the braking and stabilisation systems3.1. Overview of the braking and stabilisation systemsIt is difficult to classify the large number of braking and stabilisation systems. Some of the systems are linked hierarchically, others have rather different developmental stages or are extentions for the hardware and software which complement the existing features.System division Brake safety systems ABS EBV CBC GMB MSR HBA HBB FBS Antilock braking system ESC Stabilisation systems Electronic stability control Trailer Stability Assist Sensitive stability control Corrective steering when braking or turning the vehicleElectronic braking force distribution at the rear axle TSA Extended cornering brake control S-ESCExtended stabilisation of the vehicle steering angle DSR while braking Engine towing torque control Hydraulic brake assist Hydraulic brake boosterProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�(Overboost) Compensation of braking effect during brake release Traction control safety systems Auxiliary systems HHC BSW TPM Hill Hold Control Brake-disc wiper system Tyre pressure monitoringTCS EDL XDLTraction control system Electronic differential lock Extended differential lock Offroad functionHill descent control ABS OFFROAD TCS OFFROAD EDL OFFROAD Antilock braking system Traction control while driving Electronic differential lockGB9 3.2. Hierarchy of the braking and stabilisation systemsESCABS - Offroad TCS - Offroad EDL - Offroad Hill descent controlHBA , HBB, Overboost,HHC , TSA, BSWDSR Dynamic steering response for improved stability of the vehicleEDL , XDLProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright ŠKODA AUTO A. S.� TCSby , MSRABS, including the sub-systems EBV, CBC , GMBSP88_20The ESC system - combines all the systems for traction control and assist systems Offroad mode - support systems for driving on unpaved road surfaces Support systems for improving the driving safety Correction of driving characteristics during intervention Systems with specific brake intervention (ESC system is required) Systems with specific intervention of the engine control system Systems with specific brake intervention10GB 3.3. Application of the systems depending on the driving modeOne of the possibilities of classification is the assignment of the control systems to the driving modes "Starting off", "Driving" and "Braking". The following illustrations show what systems can be used in which operating mode.Passenger carSP88_29Starting offEDL TCS HHC XDL (RS) TCS MSR ESC DSR TSA BSWDrivingABS – EBV – CBC – GMB ESC HBA Overboost HBBBrakingOffroadSP88_30Starting offEDL - Offroad TCS - OffroadDrivingHill descent controlBrakingABS - OffroadProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB11 4. Fundamentals of vehicle dynamicsBefore we continue with the principle explanation of the brake assist systems, we want to remind you once more of the basic principles of the behaviour of a rolling tyre on the road. If the vehicle is not equipped with tyres that are able to transfer braking forces, traction forces and interventions of the brake assist systems effectively onto the road, then the assist systems do not operate correctly and cannot assist the driver in a critical situation. ŠKODA Auto a. s. works actively together with the tyre manufacturers during the vehicle's development process, when coordinating the driving behaviour of the chassis with all of the brake assist systems and tests the functions in extreme weather and driving conditions. ŠKODA AUTO a.s. recommends tyres for each vehicle model that make the driving behaviour of Škoda vehicles predictable, so that the brake assist systems can ensure higher safety on the road for the driver.4.1. Circle of frictional forcesThe momentary adhesion behaviour of the wheel or the tyre can be shown using the so-called circle of frictional forces whose diametre corresponds to the tyre adhesion on the road (the better the adhesion, the larger the diametre of the circle). To prevent the loss of adhesion between the tyre and the road surface, the total force acting on the wheel G (sum of the longitudinal force B and lateral force S ) must not exceed the radius of the circle of frictional forces. Otherwise, the wheel is locked (when braking), or it spins (when accelerating), which is always combined with skidding or loss of steering abilityIn reality, however, tyres have a greater adhesion in longitudinal direction so that the circle of frictional forces actually has the shape of an ellipse. We will however continue to use the term circle for reasons of simplification.The size and direction of the individual forces is expressed by vectors, which are shown with arrows and by adding geometric composition. • The longitudinal forces ( B) arise during acceleration or deceleration of the vehicle • The lateral forces (S ) arise, especially when cornering (due to the centrifugal force acting on the vehicle) and also during an initial road surface inclination When illustrating the adhesion behaviour of the circle of frictional forces, the larger circle diametre ( b) corresponds to a dry road surface and the smaller circle diametre (a) to a wet road surface. If the total vector (G) obtained by the vector addition of the longitudinal and lateral forces does not exceed the radius of the individual circle, the tyre rolls correctly along the road and helps to steer the vehicle in the desired direction.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�12GB However, if the total size of the vector (G) exceeds the radius of the circle, the tyre no longer helps to steer the vehicle and it becomes uncontrollable. The vehicle starts moving in the direction of the total vector.4.1.1. Straight-ahead position of the vehicleIf you brake hard when driving straight ahead and the vector of the longitudinal force (B), i.e. the braking force still remains in the valid circle for the corresponding road surface, the wheel continues to roll on and helps to steer the vehicle in the desired direction. However, if you increase the brake pressure further (and the vehicle is not equipped with braking and stabilisation systems), the vector of the longitudinal force leaves the circle and the wheels are locked because the adhesion can no longer transfer the resulting braking force. b The vehicle goes into an uncontrollable tailspin. S B G a b - lateral force - longitudinal force - total force - wet road surface - dry road surfacea S B G4.1.2. CorneringWhen braking in a curve or on a road surface with lateral inclination, the wheel can also lock if the vector of the longitudinal force ( B), i.e the braking force is smaller than the radius of the respective circle of frictional forces, because the lateral force or the centrifugal force vector plays a part at the contact point of the tyre with the road surface. However, the sum of both vectors is decisive, and if only one of them exceeds the circle of frictional forces the wheel will lock and the vehicle will go into a tailspin in direction of the total vector or the vector sum. A similar situation can occur even during rapid acceleration or when driving on snow, if one of the drive wheels begins to spin. For this reason, braking or accelerating around a corner, especially on a wet road surface or on ice, is dangerous. The vehicle quickly looses its steerability and is spinning out after navigating the curve.SP88_09S - lateral force B - longitudinal force G - total forceProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SB GSP88_10GB13 4.2. Tyre slipThe tyre slip is defined by the difference between the theoretical and actual distance travelled by the vehicle. While the length of the theoretical distance corresponds precisely to the circumscribed tyre circumferences, the actual distance travelled at the slip ratio is shorter.I=Stable range1(vof the vehicle – vof the tyre circumference) v of the vehicleUnstable rangeFriction coefficient μHFLateral force coefficient μS20100 λ [%]SP88_07ABS control range Friction and lateral force coefficient depending on the brake slip for the respective angle of the directional deviationThis results in a brake slip when the wheel rotates at a slower speed compared to the vehicle speed. The coefficient of the adhesion depends on the size of the slip and reaches its maximum at about λ = 20%. The coefficient of the lateral force defines the ability of the wheel to transfer the lateral (steering) forces and drops with increasing slip - the ability to steer the vehicle is reduced. The ABS system attempts to use the maximum range of the friction coefficient.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�14GB 4.3. Braking pathProbably only few of us are aware that the problem does not arise when starting off, but rather that there is a problem when bringing the vehicle to a complete stop at any time. Before driving off, the vehicle is stationary and I can take my time to determine the proper timing free of stress. Valuable time and the distance traversed by the vehicle from the instant the brakes are applied until the vehicle comes to a complete stop, are lost. Add to this that not everyone is able to solve critical situations under pressure. In critical situations, drivers often act hastily or panic. Then the drivers are slow in applying the brakes or only applied full brake pressure when it was too late, etc. Each driver has actually several individual diagrams: • the driver acts confidently and he has the vehicle under control, • stress, when the driver is under pressure, • driver fatigue, etc. This changes the response time of the driver, during which he evaluates the situation and decides which steps to take next. Driver response time Braking distance Deceleration Beginning of the braking effectPerception of obstacle Assessment of the situation Response time Brake pedal actuationDis tan ceVe hFull brakingiclespeedTimeSP88_28The driver hits the brakes at the point in time when he sees the obstacle. The driver then assesses the situation and responds to it; the response time depends on the experience, physical condition and concentration of the driver. During the response time of the system, all the interactions of the braking system must be overcome. When the driver steps on the brake pedal, the response time of the braking system begins until a determined brake pressure value is achieved. The braking time is calculated from the beginning of the braking operation. The duration of the braking effect corresponds to the time the braking force is applied until the vehicles comes to a complete stop.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB15 5. Sensor5.1. Sensor logic of the braking and stabilisation systemsSo that man can respond to his environment and has enough time to avoid approaching danger, he must be able to perceive his environment ("scan"). For this, he must use his senses. Optical sensors (eyes), acoustic sensors and vestibular sensors (ears), sensors that react to chemicals (smell and taste), as well as sensors that respond to contact or temperature (sense of touch). The aural sense is a kind of "sensor unit", i.e a combination of multiple sensors, because they register both sound and acceleration. SensorControl unitActuatorSP88_13Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�ABS/ESP control unit Sensor Pushbutton A similar logic applies to vehicles as well as braking and stabilisation systems. In order to ensure that these systems can operate correctly and the risk of critical driving situations can be reduced or prevented, the systems must be equipped with sensors (senders) that can detect the driving situations. In particular the wheel speed sensor, the acceleration sensor, the turning angle sensor and the steering angle sensor detect the vehicle's current position on the road. So that the system can work with complex information, it is also equipped with brake pressure senders in the master brake cylinder as well as brake pedal position senders, etc. Hydraulic unit Brake light switch ActuatorSteering angle sensor Return pumpSpeed sensorThe main difference between the senses of a human being and the sensors of electronic systems is the sense of sight. It enables people to see things. The electronic systems respond only to a vehicle's condition that has already occured. They try to reduce the risk of the situation resulting from the driver's poor assessment.SP88_12*The senser unit for the acceleration is integrated in the ESC control unit* The fi g. SSP88_12 is only an example. The number of sensors and actuators as well as their interaction can vary depending on the model version and the vehicle equipment.16GB 5.2. Sensors used in the circuits of the braking and stabilisation systemsBased on the information from the sensors, it is evaluated in which direction the vehicle accelerates or decelerates and whether it revolves around its own axis using various functions of the wheel slip control and assist systems. The control systems can use this data in order to determine the actual direction of vehicle motion or the force acting on the vehicle and this may influence the direction of movement to some extent. Highly sensitive sensors are used to detect a critical driving situation already in the beginning phase and thus the corresponding measures can be initiated.Angular speed of rotation along the vertical axis of the vehicleLateral forcesAcceleration and deceleration forcesLateral forcesSP88_11Inclination along the transverse axis of the vehicle Inclination along the longitudinal axis of the vehicle Wheel rotationvalues measured by the sensors recalculated values centre of gravity of the vehicleProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�• The ABS system uses the wheel speed sensor for determining the wheel rotation speed. • The ESC system, as opposed to the ABS system, also uses the acceleration sensor and the turning angle sensor in order to evaluate the direction of the vehicle motion on the basis of the centrifugal forces acting on the vehicle.GB17 ESC system ABS systemWheel speed sensor - active sensors, which operate on the Hall effect principle, are used - the wheel speed is measured depending on the alternating frequency of the Hall voltage, which increases in line with increasing speed low frequency Steering angle sensor - optical sensor or Hall sensor; depending on vehicle class and year of manufacture - the optical sensor is built into the steering column, the Hall sensor is an integral part of the power steering high frequencySP88_18 SP88_17low engine speedhigh engine speedThe ESC system, fitted to the models Fabia and Roomster, includes a steering angle sensor.Turning angle sensor - the sensor is integrated in the ESC control unitAcceleration sensor - the transverse and longitudinal acceleration sensors are integrated in the ESC control unitThe pressure sensor - is integrated in the ESC unitSP88_42Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�You will find a detailed description of the sensors in the Self-Study Programme No. 82.18GB 5.3. Communication protocolThe ESC is an extension of the ABS system and meets the increasing consumer demand - increased computing power of PC hardware components, - Communication with other electronic systems in the vehicle (engine, steering, airbags ...), which makes the use of the communication protocol CAN bus necessary. Currently the networks based on the communication protocol CAN bus are used to their full capacity and are gradually replaced by communication networks based on optical cables, such as Flex Ray (first used in the BMW X5 Shock Absorber Control 10/2006) that has ten times more capacity than CAN bus.bit/s 400 M Transmission speedof the mediumFirewire25 MMOST Safety10 MFlex Ray Convenience systems in the interior of the vehicle1MCAN driveTT CANBluetooth500 K CAN Convenience 20 K LINProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB19 6. Antilock braking system (ABS)The ABS system automatically controls the braking effect of one or several vehicle wheels. It is the basis for all the braking and stabilisation systems and is a system with specific brake intervention.6.1. Functional requirements of the ABSensuring the stability and steerability of the vehicle, ensuring the controllability of the vehicle during heavy braking, optimum use of adhesion of all the wheels to ensure the shortest possible braking distance, quick response to the change of road surface, i.e. changes in adhesion (e.g. asphalt/ice) and detection of the so-called "aquaplaning" (swimming of the tyres), - in the event of a failure of one of the components of the control loop, a conventional braking system must act as a back-up and the fault must be signaled.6.2. Vehicle behaviour without ABSIn the event of heavy braking and depending on the adhesion property of the vehicle surface, one or several wheels do no longer have sufficient adhesion in order to transfer the braking force onto the road, and tend to lock up. If a wheel locks in this way, we refer to it as 100% wheel slip. In the event of friction loss, the tyres do no longer develop cornering forces which keep the vehicle in its lane and it becomes uncontrollable through the effect of the centrifugal force.6.3. Vehicle behaviour with ABSProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP88_31These dangerous driving situations can be prevented effectively by using the ABS system. The ABS system increases the driving stability by preventing the wheels from locking up during braking maneuvers. It reduces the braking force or the brake pressure on the respective wheels so that guiding forces are transferred onto the road and the vehicle remains controllable.SP88_3220GB 6.4. ABS system componentsSpeed sensor ABS warning lightTandem main cylinderSpeed sensorProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Speed sensor Brake light switchSpeed sensor ABS control unit with hydraulic unitSP88_47The division of the system into two separate brake circuits increases vehicle safety during braking situations. In the case that one of the circuits is defective, the second one intervenes and the vehicle can be stopped. A double-circuit brake system with diagonal arrangement is used in Škoda vehicles.GB21 6.5. ABS hydraulic diagramvalve open1 2valve closed435M8 7 9 10 12 11 13 14 16 15 6}}Source of hydraulic pressureControl elements17 1819 2021 2223 24}SP88_36Actuators and sensors1 – reservoir 2 - brake booster 3 - brake pedal sensor 4 - brake pressure sender 5 - ABS/ESC control unit 6 - return pump 7 - pressure vessel 8 - bumper9 - front left ABS inlet valve 10 - front left ABS outlet valve 11 - rear right ABS inlet valve 12 - rear right ABS outletProtected valve by copyright. Copying for private or commercial in part or in whole, is not permitted Control purposes, elements authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability 13 - front right ABS inletunless valve with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� 14 - front right ABS outlet valve 15 - rear left ABS inlet valve 16 - rear left ABS outlet valve 17 - front left wheel brake cylinder 18 - front left speed sensor 19 - front right wheel brake cylinder 20 - front right speed sensor 21 - rear left wheel brake cylinder 22 - rear left speed sensor 23 - rear right wheel brake cylinder 24 - rear right speed sensor 22} } }Source of hydraulic pressureActuators and sensorsGB 6.6. ABS operating principleI. Brake pedal actuationII. Pressure controlIII. Pressure releaseIV. Pressure build-up1 26 8 79 1017 18SP88_351 - brake pedal pressed 2 - tandem main cylinder 6 - return pump7 - pressure vessel 8 - bumper 9 - ABS inlet valve10 - ABS outlet valve 17 - wheel brake cylinder 18 - speed sensorI. Brake pedal actuation The ABS system compares the speed of all the wheels after the brake pedal actuation ( 1). In the case of impending wheel lock, the ABS system closes the inlet valve (9) of the respective wheel. This holds the brake pressure on the respective wheel at a constant value and the driver can no longer increase its value by depressing the pedal. II. If the wheels still show a tendency to lock, the control opens the ABS outlet valve ( 10) and the pressure is released into the pressure vessel ( 7 ). III. Pressure release If the wheels continue to show a tendency to lock, the excess pressure is released via the return pump (6 ). IV. Pressure build-up If the wheels do no longer show any tendency to lock, the inlet valve (9) is opened and the ABS outlet valve ( 10) is closed so that once again brake pressure can build up.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.� Pressure controlGB23 This system keeps the vehicle under control and tests continuously during each test cycle the limit of adhesion, so that the maximum braking effect can always be achieved. Part of the ABS system are also systems that improve the basic function of the ABS. These systems do not perform any independent operation, yet only support the ABS system. These systems include: - electronic braking force distribution (EBV), - cornering brake control, CBC, - influence of the yaw moment (GMB).You will find a detailed description of the antilock braking system (ABS) in the Self-Study Programme No. 8 and 26.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�24GB 7. Electronic braking force distribution (EBV)If on a vehicle both wheels of the rear axle lock up, the vehicle will be directionally unstable and usually the driving direction changes in an uncontrollable manner. In order to prevent such a dangerious driving situation from occurring, the vehicle is fi tted with the electronic braking force distribution EBV. The electronic braking force distribution EBV is a software upgrade of the ABS system. The EBV function requires no additional components, it uses only the existing components of the ABS system. The EBV function replaces the previously used mechanical brake power distributor.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Brake pressure on the front axleBrake pressure on the rear axlethe EBV-function prevents over-braking of the rear axleSP88_43When braking, a dynamic moment occurs due to the centre of gravity of the vehicle that changes the axle load distribution. The front axle load increases while the rear axle is relieved due to the dynamic moment. This leads to vehicle inclination along the transverse axis, which results in locked rear wheels.GB25 With the help of the wheel speed sensor, the ABS control unit detects that over-braking (wheel locking) of the rear wheels is about to take place when the vehicle tilts along the transverse axis. With the help of the electromagnetic valves integrated in the ABS control unit, the EBV function reduces the brake force of the rear wheels and thereby ensures maximum braking effect on the front and rear axles. This prevents the deviation of the rear wheels from the direction of travel as a result of wheel lock.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP88_38In contrast to the previously used mechanical brake power distributor, the EBV function can control the braking force individually for each rear wheel. This allows the various adhesion conditions of the road to be considered. The EBV function detects the deceleration of one or both rear wheels and reduces the braking pressure on the respective wheel.26GB 8. Cornering brake control (CBC)The dangerous handling characteristics of the vehicle when braking around a corner may show themselves in oversteering or understeering, resulting from the vehicle reaching the limits of traction and starting to skid. This vehicle characteristic results from the braking forces of the wheels and tyres transferred to the road which are restricted by the adhesion conditions. If the vehicle is to remain in "neutral" when braking around a corner, the brake pressure to each each wheel must be controlled individually depending on the transfer of the tyre guiding forces onto the road. For this reason, the cornering brake control (CBC) improves the stability CBC is a software upgrade of the ABS system. The CBC function requires no additional components, it uses only the existing components of the ABS system. The CBC function detects dangerous situations when braking in a curve - understeer/oversteer - based on the wheel speed (without mandatory use of the rotation angle sensor or lateral acceleration sensor). The CBC function is applied only in the control range of the ABS system. This situation is detected by the CBC function based on the speed of each wheel. Through further analysis, the ABS control unit can identify understeer or oversteer of the vehicle and controls the brake pressure accordingly. The brake pressure control has three phases just like the ABS control: - pressure control, - pressure release, - pressure build-up. The ABS system overrides the CBC function. If the limit of the ABS control range is reached during wheel lock, the CBC function is switched off. The ABS system itself now prevents wheel lock.UndersteerOversteerProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�On vehicles with CBC function, the brake pressure to the front axle is reduced in an understeer situation.On vehicles with CBC function, the brake pressure to the inner wheels is reduced in an oversteer situation during cornering.SP88_44GB27 9. Influence of the yaw moment (GMB)Yaw moments result along the vertical axis of the vehicle under heavy braking on a road where the adhesion levels between the vehicle tyre and the road surface differ on both sides of the vehicle. This causes the vehicle to move laterally out of its lane and the vehicle begins to spin on the surface with high adhesion. The GMB function is a software upgrade of the ABS system which eliminates the yaw moment by means of the build-up of different brake pressures applied between the left and right wheels, and delays the yaw moment through the time delay. If the ABS system in the context of the GMB function detects different wheel locking during brake application on each side of the vehicle, the system will analyse the possibility to generate yaw moment. For this reason, the system reduces the braking force to those wheels which tend to lock up, until the wheel speed on the right and left wheel is balanced again.Situation without GMBSituation with GMBProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP88_45The brake pressure applied to the wheels does not increase quickly on a rough road surface. The dangerous turning of the vehicle is compensated for.28GB 10. Traction control system (TCS)The TSC system facilitates the start-off on a wet road, because it reduces the slip of the drive wheels. It operates within the entire speed range. In order to reduce the slip of the drive wheels, the TCS system takes over the task of the engine torque control. The driver should imagine the accelerator pedal is disengaged.10.1. ArrangementThe TCS system is a software and hardware upgrade of the ABS system. The TCS software is integrated in a more powerful ABS control unit with an extended programme memory. It uses the speed sensor signals just as in the ABS system. To perform the desired functions, the ABS braking system communicates with the engine control unit via a CAN databus. Interface to engine control system In contrast to the ABS system, the TCS acts on the engine power i.e the drive torque of the wheels. Thus the accelerator pedal must be mechanically separated from the throttle valve position. It must therefore be possible to control the engine power output regardless of the accelerator pedal position. In the first ABS systems with TCS function, the attempts to solve the engine torque reduction have differed considerably. For example, systems have been used with an additional throttle valve or with the possibility of ignition suppression. With the introduction of the CAN data bus systems and the electronic throttle function, this convenience interface for modifying the torque and the engine speed can be used for additional components. Changes in the hydraulic unit If the vehicle is equipped with the ESC system, the TCS function also operates together with the EDL function. Protected by copyright. Copying for orexplanation commercial purposes, in part or in whole, is not permitted In the chapter EDL, you can fiprivate nd an of the principle (hardware change) in the hydraulic unit.unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�Situation with TCSSituation without TCSSP88_46GB29 10.2. TCS functionOn vehicles with the TCS system, four wheel accelerations are calculated in accordance with the wheel speed. With the help of extended evaluation, the TCS software analyses the following driving situations: • Front-wheel drive - the acceleration of the front drive wheels is determined, - the speed, the acceleration of the vehicle or the curve data recognition is determined by the wheel speed sensors of the non-driven or trailing axle. - the drive slip is calculated from the difference in speed of the driven and non-driven wheels. • 4x4 drive (standard equipment – ESC): - the acceleration of the drive wheels on both axles is calculated, - the system uses the longitudinal and lateral acceleration sensors, the rotational speed sensors and the steering wheel angle sensors for determining the speed, the acceleration of the vehicle or the curve data recognition, - the drive slip is calculated from the difference between the information from the longitudinal acceleration sensor and the acceleration of the drive wheels on both axles.With this information, the TCS system determines the inclination of the spinning drive wheels. The current engine torque signal is read by the engine control unit. The TCS system evaluates the information and adopts the necessary measures. If the vehicle is equipped with the ESC system, it will also use the DS function at lower speeds and brake the faster spinning wheel of the drive axle. The control has two stages: 1. By reducing the engine torque the slip of the drive wheels is also reduced to zero, i.e. to a state in which the wheels are able to transfer control forces, 2. if the vehicle is equipped with the ESC system, the EDL also assists the TCS function; by comparing the slip values of the drive wheels on the axle, the EDL system brakes the faster spinning drive wheel.In order to intervene in the engine control system, the TCS system determines the required engine torque from the calculated drive slip and the actual engine torque. This will be transmitted to the engine control unit. The engine torque restriction is carried out by the engine control unit in the following way: - by changing the position of the throttle valve, - by changing the injection pulses, - by changing the injection pulses on diesel engines, - by suppressing the switching process (automatic transmission).Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�30GB 11. Engine towing torque control (MSR)It is applied when wheel slip occurs during engine braking. This situation can occur in the case of rapid deceleration or driving in the single speed range and quickly releasing the clutch pedal. The MSR reduces the braking effect of the engine through an intervention in the engine control and an increase in the engine torque. The MSR intervenes only if the following conditions are met: • accelerator pedal disengaged, • slip on the drive wheels, • gear engaged, • clutch pedal disengaged, The engine drag torque control (MSR) is the opposite of the TCS system. If the system detects that a slip occurs on the drive wheels resulting from the braking effect, it will retrieve the appropriate drive torque of the engine torque, which facilitates the re-turning of the wheels. The slip phase of the wheels is shortened and the maneuverability of the vehicle is restored. The driver takes his foot off the accelerator and changes down to a lower gear. The resulting braking force on the wheel can lead to a slip or even to the wheels locking up due to adverse driving conditions and in turn the vehicle becomes unsteerable. The MSR function acts on the braking effect of the engine and reduces it due to the increase in engine torque. In this way, the MSR function ensures stability and steerability of the vehicle.11.1. Functional descriptionThe MSR system determines whether a slip occurs on the drive wheels when the available engine torque is reduced, using the information of the engine control system (e.g. engine speed, throttle valve position, accelerator pedal position) and the speed sensor signal. The brake control unit evaluates this information and transmits the necessary data to the engine control unit. The system remains in the control range that best exploits the engine brake torque, while at the same time ensuring sufficient cornering forces. The MSR operates in the entire engine speed range. The engine Copying drag torque control stops operating when the driver takes his foot off the accelerator. Protected by copyright. for private or commercial purposes, in part or in whole, is not permittedunless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�SP88_50GB31 12. Electronic stability control (ESC)The ESC system has been developed to improve the vehicle stability during evasive maneuvers. It improves the directional stability of the vehicle during critical situations in combination with the driving dynamics. The assessment of critical situations is based on the evaluation of actual vehicle behaviour in comparison with a determination of vehicle behaviour demanded by the driver. The electronic stability control ESC uses its sensors to detect when a critical situation is developing. Thereafter, it responds to the situation by selectively braking the individual wheels and intervenes in the engine and transmission control system, thus preserving the stability and steerability of the vehicle. The ESC system decides under what dynamic driving conditions, which traction control system should intervene earlier or at a later stage and controls their mutual intervention. The ESC system is always ready. The assessment of a critical situation involving the driving dynamics is based on the evaluation of actual vehicle behaviour in comparison with a determination of vehicle behaviour demanded by the driver. A control intervention by the ESC commences when a deviation occurs. Depending on the situation, the ESC system reduces the engine torque and suppresses the switching processes of the automatic gearbox. Then the ESC system stabilises the vehicle behaviour by selectively braking one or several wheels. The engine control system is the first to intervene in case of understeer, whereas the brake system intervenes first in case of oversteer. The control intervention continues until the vehicle stability is achieved. The ESC system creates the yaw moment acting around the centre of gravity of the vehicle by braking the individual wheels. The yaw moment acts against the direction of vehicle motion and stabilises the desired driving direction. Sensor • turning angle • pressure in the master brake cylinder • accelerator pedalDemand on the driver?Vehicle behaviourSensor • wheel speed • centrifugal acceleration • yaw velocity (longitudinal acceleration)ESC intervention12.1. Vehicle path with stability control ESCThe basic conditions that can occur while driving, are understeer, oversteer, and evasive maneuvers. Understeer An indication of the understeer of the vehicle (spinning of the front axle) is the reduced steering sensitivity. It arises most often while accelerating through a curve. The tyre of the front axle transfers the driving and control forces onto the road. The load of the front tyres is exceeded. The vehicle maneuvers around a curve of a larger radius, than the driver visualises when turning the steering wheel. The ESC unit stabilises the vehicle in two stages: 1. The engine control unit receives a command to reduce the engine torque, Situation without ESC Situation with ESC 2. While braking the inner wheel when driving around a curve, a stabilisation torque arises against the centre of gravity of the vehicle which turns the vehicle into the direction set on the steering wheel. Older systems used the rear inner wheel for the stabilisation intervention when cornering. The current ESC systems use both inner wheels for thestabilisation intervention when cornering. The ESC unit determines the choice of the wheel Protectedbased by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted and the intensity of the braking intervention unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability on the degree of vehicle understeer. with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�32GB Situation without ESCSituation with ESCOversteer The vehicle oversteering behaviour must be corrected (skidding of the rear axle) by changing the direction of rotation of the steering wheel. This condition is more difficult to master than the vehicle's understeering behaviour. The ESC unit stabilises the vehicle in two stages: 1. While braking the outer front wheel, a stabilisation torque arises against the centre of gravity SP88_65 of the vehicle which turns the vehicle into the direction set on the steering wheel. 2. If this intervention is not sufficent, the ESC unit transmits the command to the engine control unit for accelerating the vehicle over a short period of time (this condition occurs very rarely).Evasive manoeuvre The primary reason for the ESC development was to achieve that this maneuver could be completed in the safest possible way. A vehicle without ESC system must avoid an unexpected obstacle according to the illustration. The driver turns the steering wheel to the left and then immediately to the right. The vehicle starts swaying and the rear part of the vehicle swings out. The driver can hardly turn the vehicle and this can cause the vehicle to skid uncontrollably. Vehicle with ESC system. The driver attempts the same maneuver as in the previous case. The ESC system assists the driver in the following steps: 1. During the first left turn, the vehicle understeers. By reducing the engine torque and braking the rear inner wheel when cornering, the vehicle's understeer is minimised. 2. During the second turn to the right, the direction of movement of the vehicle is assisted through the intervention of the front wheel in order to accelerate the change in direction. 3. When the vehicle returns to the right side of the road, the driver turns the front wheels to the left and the vehicle's response is assisted by the intervention of the left front wheel. Above you can find a very simplified description of the vehicle behaviour. During an actual maneuver, the vehicle understeers and oversteers in quick succession, understeering and oversteering of the vehicle is then corrected via the ESC unit. It is very diffcult to describe all the conditions that the vehicle encounters during the maneuver. In addition, each vehicle has different handling and response characteristics. Situation without ESC Situation with ESCSP88_47The evasive maneuver is composed of road stretches where the vehicle may understeer and oversteer.Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�GB33 12.2. Hydraulic diagram ESC1 - reservoir 2 - brake booster 3 - brake pedal sensor 4 - brake pressure sender 5 - ESC control unit 6 - return pump 7 - pressure vessel 8 - bumper 9 - front left inlet valve 10 - front left outlet valve 11 - rear right inlet valve 12 - rear right outlet valve 13 - front right inlet valve 14 - front right outlet valve 15 - rear left inlet valve 16 - rear left outlet valve} }1Source of hydraulic pressure17 - front left wheel brake cylinder 18 - front left speed sensor 19 - front right wheel brake cylinder 20 - front right speed sensor 21 - rear left wheel brake cylinder 22 - rear left speed sensor 23 - rear right wheel brake cylinder 24 - rear right speed sensor 25 - changeover valve 26 - high-pressure changeover valve 27 - CAN data bus}} } }}Actuators and sensorsControl elements22743Source of hydraulic pressure (driver) Control elements (x ABS) Source of hydraulic pressure& & & & & && & & & & &252652526M8 7 6(pump, accumulator)910121113141615Control elementsProtected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�17 1819 2021 2223 24}Actuators and wheel speed sensor34GB 13. Electronic differential lock (EDL)The EDL system fulfills a similar function as the mechanical differential lock and is used on the drive wheels during the vehicle acceleration under different adhesion conditions. The EDL uses the ESC hydraulic unit. It builds up the brake pressure independently (without brake pedal actuation). If the EDL system detects that one of the drive wheels is spinning, it slows down the wheel through a targeted brake intervention in such a way that the drive force from the second wheel of the axle can be transferred via