TECHNICAL DOCUMENTATION

SSP 201 The Lupo

PDFEN56 pages4 MB
SSP 201 The Lupo - PDF cover

This PDF is currently unavailable.

Read document text
The LupoDesign and functionSelf-Study Programme No. 201SE LF -STUD YPRO GRAM ME No 201 The Lupo, a new addition to the subcompact family, extends the Volkswagen product range.In spite of its compact dimensions, the Lupo boasts a specification which stands comparison with any saloon and is rounded off by a distinctive design.Environmental pollution kept to a minimum by using fuel-efficient, low-emission and quiet engines as well as recycleable and recycled plastic parts.The Lupo conforms to all internationally recognised safety standards for head-on collision, side impact, offset collision and rear collision as well as for rollover.SSP 201_134SSP 201_130SSP 201_131The small and highly manoeuvrable vehicle is simply likeable, chic and natural.NewImportant NoteThe Self-Study Programme is no Workshop Manual.Please always refer to the relevant Service Literature for all inspection, adjustment and repair instructions.2 At a glanceThe Lupo ....................................................................... 4Vehicle dimensions, aerodynamics The car and the environment Environmental protection, recyclingBody .............................................................................. 10Safety bodyshell, paintwork structure and corrosion protection, high-strength body panels Soundproofing, Isofix, fabric sliding roof Front and rear bumpers Restraint system, airbagsEngines .......................................................................... 18Engine-gearbox combination Engines, roller cam follower,Power transmission ...................................................... 26Manual gearbox 085 and gear selection Manual gearbox 002 and gear selection Automatic gearbox and gate selectionFuel system ................................................................... 29 Running gear ................................................................ 30Steering Front axle/rear axle Brake system Front and rear brakes ESBSElectrical system .......................................................... 38Vehicle electrical system/components Fitting locations of control units, Dash panel insert, central locking Radio generation ’99Heating, air conditioning system ............................... 48Heating, air conditioning system, Radiator fan control unit, high pressure sender, system overview, functional diagramService ........................................................................... 55Special tools3 The LupoThe small LUPO achieves great things in terms of safety, quality, performance, running gear and equipment.• Safety The safety bodyshell, belt tensioners, front airbags and side airbags mean that the little Lupo is no baby when it comes to safety.SSP 201_174SSP 201_133• The running gear The suspension strut front axle with wishbones, as well as the torsion beam rear axle are a winning team and place the LUPO firmly on the road.SSP 201_0804 • Equipment level A 4-seater or 5-seater version can be specified. Easy Entry seats are standard for the driver and front passenger. They exceed the standard specification. Also available for the LUPO is a complete range of extras ranging from the electric fabric sliding roof and the air conditioning system to the navigation system.SSP 201_168• Quality The Lupo also meets Volkswagen's recognised quality standard: • Narrow body joints • High-quality materialsSSP 201_131• Engines and gearboxes A choice of four petrol engines and one diesel engine in combination with a 5-speed manual gearbox and a 4-speed automatic gearbox will be available when the LUPO is launched on the market.SSP 201_1325 The LupoVehicle dimensionsTank capacity 34 litresWidth: 1639 mmFront track width: 1387 mm (4 1/2 J x 13) 1371 mm (5 1/2 J x 13, 6 J x 14)SSP 201_010Height: 1460 mmRear track width: 1400 mm (4 1/2 J x 13) 1384 mm (5 1/2 J x 13, 6 J x 14)SSP 201_011With a maximum length of 3527 mm, the LUPO belongs to the subcompact class.729 mmWheelbase: 2323 mm Length: 3527 mm475 mmSSP 201_012The Lupo offers space for 4 or 5 persons, depending on the equipment level.The luggage compartment has a capacity of 139 or 792 litres. The rear seat backrest can be folded down. The inclination of the rear seat backrest can be adjusted in two stages in order to enlarge the luggage compartment.SSP 201_0076 Aerodynamicscd = 0.32A = 1.94 m2SSP 201_018SSP 201_130Aerodynamic drag D = 0.62 m2SSP 201_020One of the main goals in the development of the LUPO's aerodynamics was to streamline the bodyshell in such a way as to eliminate additional measures to improve the vehicle’s aerodynamics, measures which involve higher costs and weight.A streamlined bumper with integral front spoiler, optimised door mirror, small gap and joint dimensions as well as flush-fitting windows and headlights minimise aerodynamic drag and wind noise.7 The car and the environmentIn addition to households, industry, power stations, heating stations and industrial agriculture, the car is one of the principal sources of air pollution.Global annual CO2 emissions caused by manOther modes of transport Ocean-going ships Air traffic Trucks and buses Passenger cars Industry Power stations and heating stations Combustion of biomass House fires and small consumers Source: Technical University of ViennaSSP 201_005CO2 emissions constitute approx. 50 percent of the greenhouse gases which are responsible for the "manmade" phenomenon of global warming. Industry, power stations, households and small consumers are responsible a good two thirds of CO2 emissions. Road traffic worldwide accounts for approx. 12 percent of CO2 emissions, whereas cars contribute less than 6 percent.Fuel consumption of cars supplied by Volkswagen in GermanyPolo SDI 3-litre carFor Volkswagen, reducing fuel consumption, and along with it CO2 emissions, is one of its main goals in the development of new automobiles. We have agreed to reduce the fuel consumption of our new vehicles by 25 percent between 1990 and 2005. During the period from 1990 to 1995, we achieved a 10 percent reduction. We plan to achieve another 15 percent reduction within the next ten years. The so-called "3-litre car" (a car which consumes 3 litres of fuel per 100 km) is a major step towards low-CO2-emission vehicles, both for production and during operation.Source: VOLKSWAGEN AGSSP 201_0068 RecyclingVolkswagen, in association with disposal firms, runs a Workshop Disposal Programme. This process is co-ordinated through the distribution centre or the importer in charge in accordance with prevailing national legislation.These components can be disposed of without posing a burden on the environment:Wor ks Prog hop Dis posa ram me: l Disp os auto al of a w m id med otive com e range ia fre of e of ponents char and ge Advi ce envir in matte onm ent a rs conce rn nd w aste ing the dispo sal Inexp ensiv othe r item e dispos al of s fers for• Starter batteries • Laminated glass windscreens • Airbags and belt tensioner (not fired) • Brake fluid • Coolant • Shock absorbers • Plastic bumpers • Radiator grilles • Plastic fuel tanks • Wheel housing liners • Wheel covers • Lock carriers/subframes • Old tyresSSP 201_013SSP 201_0099 BodyDevelopment of the safety bodyshellThe blueprint for development of the LUPO's body was the Polo ‘95. A key development goal was to design a body whose occupant cell offers a high level of dimensional stability in crash situations.SSP 201_021During a head-on collision, the impact energy is absorbed via 2 crash planes: In the 1st crash plane, the side re-inforcement in the doors located directly behind the bumper cover, transmits the impact energy to the side members. The energy is then distributed evenly to the centre tunnel and re-inforced side members.In the 2nd crash plane, the wheelhouse side members transfer the impact energy via the door re-inforcements to the rear end.= 1st crash plane = 2nd crash planeSSP 201_046In the event of a rear collision, the side re-inforcement in the doors behind the bumper cover transmits the force to the side members. The body side panel which is almost fully enclosed on the inside helps to absorb more energy.= 1st crash plane = 2nd crash planeSSP 201_04610 In the event of a side impact, the re-inforced A- and B-pillars, the strong side members and the almost fully integrated inner panel of the door minimise deformation of the occupant cell.SSP 201_024The side impact re-inforcement in the door, the door-glass channel reinforcement and the intermediate padding produce an optimal barrier against the force of impact.Door-glass channel reinforcementPaddingSide impact reinforce ment in the doorSSP 201_026The closed door is securely anchored to the side member by means of a bracket on the underside. During a side impact, it prevent the door from intruding into the occupant cell.Bolt-on bracketPlastic guideSSP 201_02511 BodyThe body of the LUPO hasfeatures which surpass the norm for this class: - Long-term corrosion protection - Fully-galvanised body-Crash performance in acordance with VW's safety standard Modular design Narrow iointsPaintwork structure and corrosion protectionEnvironmentally friendly, waterdilutable paints are:Legend:Galvanised sheet steel Zinc phosphatisation Water based Cathodic immersion cataphoresis Filler coat-The cathodic cataphoresis, filler, top coat (met. base coat, solid base coat )SSP 201_027-All outer panel are electroplated. All inner panels are hot-dip galvanised.Top coatClear coatHigh-strength body panelsare also used in the LUPO. They are not as thick as conventional body panels and, as a result, weigh less but are stronger. High-strength body panels have the task of absorbing and distributing energy during a crash in a more controlled manner. They absorb vibrations at the rear axle mount.High-strength body panels You can find detailed information regarding high-strength sheet-metal panels in Self-Study Programme No. 200.SSP 201_02812 FBitumen-based heat-shrinkable and adhesive foils of various thickness as well as felt parts and carpeting are used for soundproofing purposes. The adhesive foils absorb the vibrations which occur in various areas of the body. Felt parts absorb noise by interrupting the sound wave.B FB BF Felt parts B Heat-shrinkable/ adhesive foilsFSSP 201_029The Isofix child safety seat fasteningis fitted in the LUPO as standard. There are 4 retaining eyelets below the rear seats, which make it possible to install two child safety seats with the Isofix fastening system. The retaining eyelets are welded to the floorpan assembly and hold the child safety seat securely during a crash.SSP 201_030The electric fabric sliding roofIn addition to the electrically-operated glass sliding/tilting roof, an electrically-operated fabric sliding roof is also available for the LUPO. The roof spoiler allows the vehicle to be driven without any draught and quietly with the sunroof open, even at high speed.Fabric sliding roof Sunroof openingRoof spoiler The electric fabric sliding roof is identical to the sunroof used in Polo model ‘95.SSP 201_03113 BodyThe front and rear bumperscomprise a side re-inforcement in the doors and a bumper cover.FrontThe front bumper cover comprises 2 componentsSide re-inforcement in the doorsThe upper section is painted in the body colourSSP 201_032The front and rear bumper covers are capable of absorbing impact energy at speeds of up to 4 kph without damage. Higher impact speeds of up to approx. 15 kph are absorbed by the side re-inforcement in the doors without deformation of the side members. The side members only become deformed as a result of a severe impact.RearSide reinforcement in the doorsBumper coverSSP 201_03414 The restraint system and the airbagsSeat belts Front: They have ball-type tensioners which are fired both mechanically and pyrotechnically.SSP 201_171 SSP 201_170For more detailled information on the belt tensioners, please refer to Self-Study Programme No. 192.3-point seat belt concepts for the rear seatsStandard equipmentThe 5-seater version is also equipped with a lap belt for the middle seat.SSP 201_172SSP 201_17315 BodyThe front airbags have a volume of 57 litres for male/female drivers and a volume of 95 litres for the front passenger. At production launch, a 120-litre front passenger's airbag will be used. It will be identical to the airbag used in the Golf ’98. The 120-ltr. front passenger's airbag cannot be replaced by the 95-ltr. airbag, therefore it can only be replaced in accordance with the original equipment level.SSP 201_174The side airbags have a volume of 12 litres.All gas generators contain acid-free propellant.SSP 201_175The function of the restraint system during severe accidents The restraint system prevents contact occurring between the shoulder and head area with the steering wheel or dash panel insert. Once the firing threshold is attained, the airbag control unit transmits the "Open central locking (CLS)" signal to the CLS control unit.SSP 201_17616 The airbag system As of a defined degree of accident severity and the the associated delay period, the appropriate airbags are triggered depending on the impact side and the angle of impact.Head-on collisionThe driver's and front passenger's airbags are triggered. Side/head-on collisionSSP 201_102The driver's, front passenger's and side airbags are triggered.SSP 201_103Side impactOnly the side airbag which is actually required to protection the vehicle's occupants is triggered. This considerably reduces repair costs after an accident.SSP 201_10417 EnginesThe engine-gearbox combinationEngines Gearbox 5-speed manual gearbox 085 4-speed automatic gearbox 001 5-speed manual gearbox 0021.0-ltr. 37 kW petrol engine with camshaft in block1.4-ltr. 16V 55 kW petrol engine1.4-ltr. 16V 74 kW petrol engine1.7-ltr. 44 kW SDI engine1.0-ltr. 37 kW rocker lever petrol engine18 The 1.0-ltr. 37 kW petrol engineis an advanced version of the proven 1.0-ltr. aluminium engine with the camshaft in block Features of the engine mechanicals are: • Aluminium cylinder crankcase with press-fitted cast iron cylinder liners • Cylinder head with single overhead camshaft • Bucket tappets with hydraulic adjusters Features of the engine management system are: • Motronic MP 9.0 (refer to Self-Study Programme No. 168) • Sequential injection • Rotating ignition voltage distribution • Selective knock controlSSP 201_038• Conforms to exhaust emission standards EU III and D3 Specifications Engine code “ALL“ 4-cylinder inline engine Valves per cylinder Displacement : 2 : 999 cm3 : 70.6 mm : 67.1 mm : 10.5 : 1 : 37 kW at 5000 rpm : 86 Nm at 3000 to 3600 rpm : Bosch Motronic MP 9.0 : unleaded 95 RONPower output crankshaft80Torque Nm2007018060160Bore50 140Stroke Compression ratio Max. output Max. torque Engine management Fuel type4012030100208010600 0 1000 2000 3000 4000 500040 6000Engine speed rpmSSP 201_041Knock control allows the engine to be operated alternatively with unleaded 91 RON fuel but with a slight reduction in power output and torque.19 EnginesThe new engine generation:Overview The 1.4-ltr. engines described on the following pages belong to a new generation of petrol engines. All have: • a new cylinder head with valve activtion via roller cam follower • Aluminium cylinder block • An engine speed sensor which is integrated in the flange for the crankshaft sealing ring at the flywheel end • static high-voltage distribution All conform to exhaust emission standards EU III and D3.SSP 201_044 SSP 201_049Cylinder head The camshafts are mounted in the camshaft housing. The camshaft housing also acts as the valve cover.Camshaft Roller cam followerCamshaftThe valves and hydraulic support elements are fitted in the cylinder head. The roller cam follower engages in the support element and abut the end of the valve stem.Hydraulic support elementIllustration of the 16V engineSSP 201_05020 Valve activation by roller cam followerConventional cam followerSlip faceCounterbearing (adjustable)The cam glides over the slip face of the cam follower. As a result, high friction losses occur and the cam follower is subjected to mechanical stress. Valve clearance is adjusted manually via the adjustable counter-bearing.SSP 201_052The roller cam followerThe roller cam follower (depressed)Hydraulic support elementRoller running in needle bearingsOil ductSSP 201_053SSP 201_054The cam of the roller cam follower rolls off a roller running in needle bearings. The cam stroke is transmitted to the valve stem with minimal friction loss.The hydraulic support element replaces the manually adjustable counter-bearing. It acts as the pivot for the roller cam follower and assumes the task of automatic valve clearance adjustment. Lubrication and filling are performed via an oil channel in the cylinder head.For more detailled information, please refer to Self-Study Programme No. 196.21 Drive unitsThe 1.4-ltr. 16V 55 kW petrol engineFeatures of the engine mechanicals: • Aluminium cylinder crankcase • Press-fitted cast iron cylinder liners • Cylinder head with roller cam followers • Secondary belt drive • Primary catalytic converter integrated in the exhaust manifoldSSP 201_043• Conforms to exhaust emission standards EU III and D3Power output kW80Torque Nm200Specifications Engine code “AKQ“ 4-cylinder inline engine Valves per cylinder : 4 : 1390 cm3 : 76.5 mm : 75.6 mm : 10.5 : 1 : 55 kW at 5000 rpm : 128 Nm at 3300 rpm : Magneti Marelli 4AV : unleaded 95 RON7018060160Displacement Bore Stroke501404012030100Compression ratio Max. output2080Max. torque10 600 0 1000 2000 3000 4000 500040 6000Engine speed rpmSSP 201_045Engine management Fuel typeFor more detailed information, please refer to Self-Study Programme No. 196.Knock control allows the engine to be operated alternatively with unleaded 91 RON fuel but with a slight reduction in power output and torque.22 The 1.4-ltr. 16V 74 kW petrol engineThe basic engine is the 1.4-ltr.-16V 55 kW petrol engine. The key differences compared to the 1.4-ltr. 16 V 55 kW petrol engine • Stronger pistons • Cylinder head with larger intake and exhaust ducts • Modified camshaft timing • Modified intake module • Modified exhaust system • Aluminium oil sump for increased rigidity of higher-performance engineSSP 201_147• conforms to exhaust emission standards EU III and D3Torque Nm200Power output kW80Specifications Engine code “ANM“ 4-cylinder in-line engine Valves per cylinder Displacement Bore Stroke : 4 : 1390 cm3 : 76.5 mm : 75.6 mm : 10.5 : 1 : 74 kW at 6000 rpm : 128 Nm at 4500 rpm : Magneti Marelli 4 AV : unleaded 98 RON70180601605014040120Compression ratio30 100Max. output20 80Max. torque10 60Engine management0 0 1000 2000 3000 4000 5000 6000 40Engine speed rpmSSP 201_048Fuel typeFor more detailed information, please refer to Self-Study Programme No. 196.The knock control also allows the engine to be operated alternatively with unleaded 91 RON fuel with a slight reduction in power output and torque.23 Drive unitsthe 1.7-ltr. 44 kW SDI diesel engineFeatures of the engine mechanicals: • Diesel direct injection engine • Naturally aspirated engine • Displacement was reduced to 1.7-ltr. from 1.9-ltr. by modifying the crankshaft stroke. • The external crankcase breather has been deleted. • The gases in the crankcase are diverted into the intake duct via the oil return ducts and the valve cover.SSP 201_055is the ne The basic engi is the 1.9-ltr. TDI with aft intermediate sh or Bosch distribut injection pump• Two-stage EGR valve for better metering of the exhaust gas recirculation • conforms to exhaust emission standards EU IIIPower output kW80Torque Nm200Specifications Engine code “AKU“ 4-cylinder inline engine Valves per cylinder Displacement : 2 : 1.7-ltr. : 79.5 mm : 86.4 mm : 19.5 : 1 : 44 kW at 4200 rpm : 115 Nm at 2200-3000 rpm : Bosch distributor injection pump and electronic control unit EDC 15 : min. 45 CN7018060160Bore50 140Stroke Compression ratio Max. output Max. torque Mixture preparation4012030100208010600 0 1000 2000 3000 4000 500040 6000Engine speed rpmSSP 201_05724Fuel type The 1.0-ltr. 37 kW petrol engineis an improved version of the 1.3-ltr. engine fitted in the Skoda Felicia. ( for certain markets only ) Features of the engine mechanicals are: • The valve is driven via a camshaft in block (ohv), tappets, push rods and rocker levers• The cylinder crankcase is made of die cast aluminium • “wet-type" cast iron cylinder liners • The crankshaft runs in 3 bearings Features of the engine management system are: • Multipoint injection • Static high-voltage distributionSSP 201_037• Conforms to exhaust emission standards EU III and D3 Specifications Engine code “AHT“ 4-cylinder in-line engine Valves per cylinder Displacement : 2 : 997 cm3 : 72 mm : 61.2 mm : 10 : 1 : 37 kW at 5000 rpm : 84 Nm at 3250 rpm : Siemens Simos 2P : unleaded 95 RONPower output kW80Torque Nm2007018060160Bore50 140Stroke Compression ratio4012030100Max. output Max. torque Engine management Fuel type208010600 0 1000Engine speed rpm200030004000500040 6000SSP 201_039For more detailed information, please refer to Self-Study Programme No. 203.Knock control allows the engine to be operated alternatively with unleaded 91 RON fuel with a slight reduction in power output and torque.25 Power transmissionThe 5-speed manual gearbox 085is fitted in petrol engines with overhead camshaft and in the diesel engine. The total transmission ratio matched to the installed engine version is spread by means of different gear ratios and final drive ratios. The gearbox is assigned to the engine via the gearbox code.ed, Tried and test the also fitted in Polo˚95Double ation synchronis gear d n 2 1st andis Reverse gear ed is unsynchronlow-motion hanism selector mecSSP 201_062The gear selection system Gear engagement is via a gate selector lever and gear selector cable.Gear selector cableGate selector cableSSP 201_063Thanks to the selector cables, the swinging motion of the engine only has a minimal effect on the gear lever. As a result, gears can be selected with greater precision.26 The 5-speed manual gearbox 002is exclusive with the 1.0-ltr. rocker lever petrol engine “AHT“, an improved version of the 1.3-ltr. engine in the Skoda Felicia. Technical features: • • ( for certain markets only ) • 5-speed manual gearbox Reverse gear is unsynchronised Two-part aluminium gearcase The end cover and the engine suspension have been modified. Common oil filling for gearbox and final drive Final drive via drive shaft flangesTried and testedgearbox adopted from the Caddy pickup•••SSP 201_060A gear change is performed by a selector rod. The gear lever is mounted on two bearing bolts in a guide in floating configuration. A cable pull transmits the relative movement of the engine to the guide. This reduces oscillation at the gear lever. The gears can therefore be engaged with greater precision.GuideSelector rodSelector housing Cable pullSSP 201_06127 Power transmissionThe 4-speed automatic gearbox 001is available for 1.4-ltr. 16V 55 kW petrol engine “AKQ“. Technical features: • Ravigneaux planetary gearElectronically controlled x 4-speed gearbois the fitted Previously also lo'95 Po e th in• Torque converter with integrated lock-up clutchSSP 201_064• Solenoid valves at the valve body for electro-hydraulic controlGear selection The individual drive positions, the parking lock and neutral are selected mechanically with the gate selector lever.• Common oil supply for planetary gear and final driveinoutThe control unit records the incoming sensor signals during vehicle operation, evaluates these signals and activates the individual solenoid valves. The integrated dynamic shift program automatically selects the "Eco" shift characteristic or "Sport" shift characteristic.SSP 201_065For more detailed information, please refer to in Self-Study Programme No. 176 “4-speed Automatic Gearbox 001“ .28 Fuel systemThe fuel tankProvenof the LUPO is located in the crash-protected area in front of the rear axle. It has a volume of 35 litres.Electric interior tank pump Gravity pressure relief valve Activated charcoal canister systemPetrol enginesThe activated charcoal canister is located at the front righthand side of the vehicle. The activated charcoal absorbs fuel components from fuel vapours.SSP 201_047 SSP 201_051Quick-release couplings are used for installing the fuel pipes.Quick-release couplingsAct. char. canister Fuel pumpSSP 201_059The fuel gauge sender is attached to the fuel pump housing.SenderSSP 201_058Diesel enginesDiesel-engined vehicles do not require a fuel pump or activated charcoal canister. The fuel gauge sender, in combination with the intake manifold for the intake, form a single unit. The fuel pump is an integral part of the distributor injection pump.29 Running gearThe running gearof the LUPO is identical to the Polo’95.les Suspension modu comprising stem group modular sytheSteeringThe running gear has been adapted to the LUPO, making allowance for driving safety and driving comfort.Front axleTorsion beam rear axleSSP 201_080The following pages will present you with the following items:• • • • •The steering The front axle The rear axle The brakes The traction control systems30 The steeringcomprises a safety steering column which is height-adjustable and a mechanical steering gear.The safety steering columnSuspension modu les comprising the Group modula r system Safety steering columnMechanical steering gear Power steering gear39 m m150 mmSSP 201_066The safety steering column can be compressed by up to 150 mm during a crash. This reduces the injury risk for the driver.Power steering Depending on performance and wheel size, the LUPO is equipped with power steering.The two track rods for power steering and mechanical steering are adjustable.SSP 201_06731 Running gearThe front axle of the LUPOcomprises suspension struts and wishbones. The suspension struts are bolted to the wheel bearing housing and the wishbones are bolted to the subframe by rubber mountings.les from the Suspension modu stem Group modular sySuspension strut Subframe g Wheel bearin housingFor more detailed information regarding this axle in respect of castor, shock absorption characteristics and the track-stabilising kingpin offset, please refer to Self-Study Programme No. 166.SSP 201_068The Lupo with power steering has an antiroll bar on the front axle.Anti-roll barSSP 201_06932 The rear axleis a torsion beam axle. Toe and camber design are defined by design and are non-adjustable. For vehicle alignment, the ascertained values can only be compared with the nominal values in the Workshop Manual.Shock absorbersSuspension modu les comprising The Group modula r system Torsion beamrear axle Second wheel bearing generationSprings and dampers are positioned separately.SSP 201_070SSP 201_083SSP 201_072The bonded rubber bushes of the rear axle have been fitted rotated through 45°. This reduces noise transmission from the road to the body.33 Running gearThe brake systemThe standard equipment comprises:are standard The following items equipment in all vehicles:• •ventilated front disc brakes self-adjusting rear drum brakesDiagonal split uit irc -c al du brake system Brake servo nt Load-depende r to la regu brake pressureFor added active safety, the anti-lock braking system ITT Mark 20 IE is available with electronic brake pressure distributor.SSP 201_07334 The front brakesVentilated disc brakesup to 55 kW dia. 239 mm x 18 mmas of 74 kW dia. 256 mm x 20 mmSSP 201_074SSP 201_071The rear brakesDrum brakes to 55 kW dia. 180 x 30 mm without ABS dia. 200 x 40 mm with ABSDisc brakes for 74 kW and above dia. 232 x 9 mm Alu. sliding caliperSSP 201_075SSP 201_07635 Running gearThe ElectronicStabilityBrakeSystemimproves track stability and steerability when the vehicle is being braked by activating the brakes selectively.ESBS is an improved software in the ITT Mark 20 IE control unit. It utilises the sensors and actuators from the antilock braking system system.SSP 201_077Understeer If a vehicle is braked heavily in a corner, the wheel location forces acting on the front wheels are reduced. As the vehicle has forwards momentum, its pushes towards the outer edge of the corner over the front axle. This driving situation is termed “understeer“.SSP 201_078In vehicles with ESBS, the ABS control unit recognises this driving situation and responds by altering the speeds of the individual wheels as appropriate. The anti-lock braking system reduces the brake pressure applied to the front axle. This increases the wheel location forces and the vehicle retains its directional stability.SSP 201_07936 Oversteer If the vehicle is steered into a corner too sharply at high speed and if the brakes are applied heavily, the rear will break away towards the outer edge of the corner. This driving situation is referred to as “oversteer“.SSP 201_081The ABS control unit recognises this situation and responds by reducing the speed of the rear wheels and reducing the brake pressure applied to the wheels on the inside of the corner. This increases the wheel traction forces acting on the wheels on the inside of the corner and the vehicle rear end retains its directional stability.SSP 201_082Malfunctioning of the ESBS can neither be diagnosed nor repaired, because a vehicle's driving dynamics cannot be reproduced with workshop facilities.37 Electrical systemDecentralised vehicle electrical systemThe layout of the electrical system is decentralised, i.e. the basic component parts of the electrical system are located at different fitting locations.The main components are: • Main fuse box at the battery • Relay carrier, coupling station, potential distributor and fuse holder behind the dash panel insert • Coupling station at A-pillar, left and right • Vehicle-specific wiring harness • Diagnosis plugDiagnosis plugCoupling station A-pillarCoupling station at A-pillar Fuse holder Relay carrier Main fuse box BatteryBracket at en-gine bulkheadPot. distributorCoupling stationSSP 201_09538 The components of the decentralised vehicle electrical systemMain fuse box Here, the electrical system is protected by fuses directly behind the battery. • The alternator, cabin power supply, glow plug system and the air conditioning system are protected by metal fuses.SSP 201_090• The ABS system and the radiator fan are protected by micro-fuses (Little Fuse). In the current flow diagram, the fuses positioned here have the code designation “SA“.Relay carrier16710019Used for mounting the relays for standard equipment and optional extras.The relay carrier is fixed by two retaining lugs.15 15 30 30 20 15 15 15 15 15 15 15 15 30 15 15 15SSP 201_091Coupling station below relay carrier16710019The connections to the vehicle electrical system are made in the coupling station by means of colour-coded and mechanically coded connectors (e.g. engine compartment, dash panel insert). The potential distributor is located on the left next to the coupling station (threaded terminal, terminal 30).SSP 201_09215 15 30 30 20 15 15 15 15 15 15 15 15 30 15 15 1539 Electrical systemThe components of the decentralised vehicle electrical systemFuse-holder16710019Two different fuses are used to protect the electrical circuit. - Mini-fuse rated for max. 15A - Micro-fuse (Little Fuse) rated for over 15 A15 15 30 30 20 15 15 15 15 15 15 15 15 30 15 15 15SSP 201_093This combination offers the following advantages: - More fuses within the same construction space - More electrical circuits protected by individual fuses In the current flow diagram, the fuses positioned here have the code designation “SB“.Coupling station at A-pillar The connections to the doors, e.g. loudspeakers, central locking and power windows, are located in this coupling station.SSP 201_097Diagnosis plug Fitting location: in dash panel insert, behind oddments tray.SSP 201_08740 The fitting locations of the control unitsAirbag control unit on gearbox tunnelEngine control unit Automatic gearbox control unitABS control unitControl unit for radiator fanControl unit for central locking/above relay carrierControl unit for immobiliser/above fuseholderSSP 201_09441 Electrical systemThe dash panel insertThe distinctive design of the dash panel insert comprises two instrument clusters.The rev counter comprising: Fuel indicator Coolant temperature display Digital clock and warning lampsThe speedometer comprising: Odometer and trip recorder Service Interval Display Indicator and warning lamps30 40 50 20 10 0 60 70SSP 201_098Setting buttons for digital clockReset button for trip recorder and Service Interval DisplayTechnical features: • LEDs are used exclusively for illumination and as warning lamps.• Connected to vehicle electrical system by means of a 32-pin connector. • The same version of the dash panel insert is used for all model variants.• Blue instrument lighting with luminous red pointers. • The analogue displays (rev counter, speedometer, fuel gauge and coolant temperature) are activated by stepping motors with software-controlled damping.42• The Lupo has the same self-diagnosis (address word 17) as in the Polo ‘98.SSP 201_089 The immobiliserThe immobiliser has a separate control unit which is equivalent to the 2nd generation in design and function and comprises an additional variable code. The control unit is behind the dash panel insert via the fuse holder. The self-diagnosis function (address word 25) is identical to the POLO ‘98.Functional description:After turning on the ignition, the transponder transmits a fixed code via the reader coil to the immobiliser control unit. If this code matches the code stored in the immobiliser control unit, a random number generator generates a variable code. This variable code is transmitted to the transponder in the car key fob. A secret arithmetic operation is now started in the transponder and in the immobiliser control unit. The transponder transmits its result to the immobiliser control unit which recognises the correct car key by comparing this result with its own result. A variable code is then cross-checked between the immobiliser control unit and engine control unit. Once a match has been established, the vehicle is ready for operation.Engine control unitTransponderReader coilImmobiliser control unitSSP 201_09943 Electrical systemThe central locking systemThe central locking system, in combination with manual window lifters, is available as an optional extra. The motors for central locking are activated directly by the central control unit. In vehicles that are also equipped with power windows, a control unit is integrated in the window lifter motor for operation and force limitation. With this version also, the motors for the central locking and window lifters are activated directly by the central control unit.The central locking comprises the following functions: • Electric motor operated central locking system with SAFE function for locking the doors and tailgate.•Convenience opening of the power windows as well as convenience locking of the window lifters and sliding/tilting roof is possible via the door lock cylinder.• • •Doors are locked and unlocked with interior Lock - Unlock button Interior light and boot light control. The airbag control unit unlocks the doors if it recognises that the vehicle has been involved in a crash.• •Self-diagnostic capability (address word 35). Anti-theft warning system with radio-wave remote control as an optionWindow lifter motor and control unitTailgate actuator motorContact switch for antitheft warning system (option)Alarm signal horn (option)Window lifter motor with control unit Operating unit Central moduleSSP 201_09644 Radio generation ‘99The BETA and GAMMA radio systems have been fundamentally revised from a technical viewpoint and their design has been updated. The alpha radio system is available with unchanged technology and design. . Control panel The figures show the user interface of the BETA and GAMMA radio systems with removable control panel.SSP 201_124Radio system BETASSP 201_118Radio system GAMMASSP 201_119The main new features of the BETA and GAMMA radio systems are:•New menu adjustments, e.g. balance or bass, and on-screen menu assistance are possible. The convenience anti-theft device saves recoding the radio system, e.g. after cutting off the power supply for servicing.•Display lighting in blue, button and buttons backlit in red.••Optionally available with permanent or removable control panel.•Self-diagnostic capability45 Electrical systemThe BETA radio system The new functional features are: • • 30-station memory • The loudspeaker balance on the left and right can be adjusted with the BAL (Balance) button. • Prepared for connecting CD changer Playback of calling or called party through all loudspeakers while conducting a telephone call. • S peed-dependent volume adaption / GALASlider for removing the control panelSSP 201_127The convenience anti-theft device To commission the radio, the four-digit code number of the electronic anti-theft device must be entered. If the radio recognises the dash panel insert, the radio is again ready for operation without having to reenter the four-digit code number a delay of several seconds. However, if the radio is fitted in another vehicle, the four-digit code number must be re-entered.When the NO contact is closed, a communication link is established between the radio and the dash panel insert via the selfdiagnosis wire (K wire). If the supply is cut off, e.g. to carry out work on the electrical system, the radio checks whether the dash panel insert is the same as before voltage cut-off after inserting the ignition key and turning on the ignition.46 The GAMMA radio system offers the following new features in addition to the functional features of the BETA: • If the vehicle has a Highline dash panel insert, the frequency and the station name are displayed.The above-specified combination is currently not available for the LUPO.•Due to programme content, e.g. classical music or rock music, the various stations have a different basic volume. The radio adjusts the basic volume by automatically adapting the volume, provided that the stations have been programmed in the station keys.•With the TIM function, up to 9 traffic announcements of a selected TP station can be recorded automatically. Max. total duration is 4 minutes. When the radio is on, every traffic information message is recorded as soon as TP appears in the display. When the radio is off, record mode can be activated by briefly pressing the TIM button. The memory automatically stores traffic information messages for a 24-hour period. Once this period of time has elapsed or when the radio is switched on, the standby function ends.For more detailed information regarding the subject of Radio Reception/Basics, please refer to Self-Study Programme No. 147 “Radio Systems ´94“.The CD player The new CD player can be combined with the BETA and GAMMA radio systems. The fitting location is above or below the radio, depending on the vehicle model.CDCD PLAYER SELECTCD INCD CHANGERCDSSP 201_125SELECT button To select CD player mode and CD changer modeCD eject buttonThe CD player can play back one music CD at a time. The CD player is operated by means of the radio buttons.The CD player can also be combined with a 6disc CD changer which has been optimised in size.47 Heating, air conditioningFor heater and air conditioner operation in the LUPO, two equipment variants are available: - a heater or a manually operated heater and air conditionerHeaterAs in other models, too, fresh air/air recirculation mode is possible for added comfort. Air recirculation mode can be switched on and off with the air recirculation button Air recirculation mode is switched off automatically when the rotary switch for air distribution is set to "Defrost". The depressed air recirculation button is released mechanically. This keeps any moist cabin air, e.g. due to wet clothing, away from windscreen.SSP 201_106SSP 201_107Manual air conditionerIn the case of the manual air conditioning system, the driver or front passenger controls the interior climate. Air conditioning mode can be switched on or off by pressing the AC button (Air Conditioning). The fresh air/air recirculation flap isoperated by electric motor. All other flaps are activated via Bowden cables.SSP 201_108An electronic high pressure sender records the overall refrigerant pressure curve.SSP 201_10948 High pressure sender G65is integrated in the high-pressure pipe of the refrigerant circuit. It records the refrigerant pressure and transduces the physical quantity of "pressure" into an electrical signal. It is an electronic pressure sensor which replaces the air conditioner pressure switch F 129 used previously.SSP 201_110The high pressure sender is currently fitted in petrol-engined vehicles with air conditioning system.Unlike the pressure switch for the air conditioning system, not only the defined pressure thresholds but also the overall pressure characteristic of the refrigerant are recorded.Signal utilisation: By evaluating the signal, the engine control unit and the radiator fan control unit recognise the load which the air conditioner compressor exerts on the engine.Plus-points: In idling mode, engine speed can be adapted exactly to the power consumption of the air conditioner compressor.Signal failure: If the radiator fan control unit does not detect a pressure signal, the air conditioner compressor is switched off.The cut-in and cut-out cycles of the radiator fan settings are staggered by a short delay time. This ensures that the speed variations of the cooling fan are barely perceptible in idling mode and enhances comfort particularly in vehicles with less powerful engines.Self-diagnosis “fault message“: The high pressure sender is stored in the fault memory of the engine electronics. e.g.: 00819 high pressure sender G65 “Signal too low“49 Heating, air conditioningFunction of the high pressure sender The refrigerant pressure is sent to a silicon crystal. A characteristic of this silicon crystal is that its electrical resistance changes as soon as it is “bent“. This is dependent on pressure level and curve. The silicon crystal, together with a microprocessor, is integrated in the sensor and supplied with voltage. Changes in the resistance of the silicon crystal and the resulting voltage changes in the crystal are processed by the microprocessor and converted into a pulse-width modulated output signal (PWM).At low pressurea If the crystal is only “bent“ minimally, the resistance change is equally as a small as the voltage change.Low pressureSilicon crystal (resistance)Voltage MicroprocessorPulse-width modulated signalSSP 201_111Pulse-width modulated signal (PWM) The pulse-width modulated signals are generated at a frequency of 50 Hz. This results in a period duration of 20 ms, which is equivalent to 100%.Period duration 20 ms ≈ 100%Pulse width 2.6 msThe pulse width at a low pressure of 1.4 bar is 2.6 ms. This is equivalent to 13% of the period duration.Low pressure 13% ≈ 1.4 barSSP 201_11350 At high (rising) pressure is the crystal thickness “bent“. The resistance increases in direct proportion to the voltage change.High pressure Silicon crystal (resistance)VoltageMicroprocessorPulse-width modulated signalSSP 201_112Pulse-width modulated signal (PWM) The pulse width increases in direct proportion to increasing pressure. The pulse width at a high pressure of 37 bar is 18 ms. This is equivalent to 90% the period duration.Period duration 20 ms ≈ 100%Pulse width 18 msHigh pressure 90% ≈ 37 barSSP 201_11451 Heating, air conditioning systemRadiator control unit J293has been improved technically, and its function has been adapted to the new high pressure sender G65. It will be fitted with the high pressure sender, and its distinguishing design features are its modified plug connections.SSP 201_121The functions are: Activating/de-activating the next higher radiator fan setting and the solenoid coupling of the air conditioner compressor Monitoring the overall pressure characteristic of the refrigerant by evaluating the pulse-width modulated signal (PWM) from the high pressure sender--Bi-directional signal exchange with the engine and gearbox control unitTest function: The control unit currently does not have selfdiagnostic capability. For details of test possibilities, please refer to the current Workshop Manual on the "Heating/air conditioning system".52 System overviewEngine ctrl unitJ...Switch for A/C systemHigh press. senderG 65E 35Ambient temperature switchF 38Gearbox control unitJ...Radiator fan control unitJ 293Solenoid couplingThermoswitch for radiator fanN 25Radiator fanF 18V7SSP 201_11653 Heating, air conditioning systemFunctional diagramA/+E9 0 SA7 SA8 SA4 SB27 SB48 1 2 3 4 N 24E35 F38F18 G65 J 293 V2V7N25Engine control unit engine control unitSSP 201_117Gearbox control unitColour codes:Input signal Output signalPositive terminal Earth N25 SB 27 SA 4 SA 8 SA 7 SB 48 V2 V7Bidirectional PWM signalComponents A/+ E9 E 35 F 18 F 38 G 65 J 293 N 24 Battery positive terminal Switch for fresh air blower Switch for air conditioning system Thermoswitch for radiator fan Ambient temperature switch High pressure sender Radiator fan control unit Series resistor for fresh air blower with safety thermal cut-outSolenoid coupling Fuse in fuse holder/relay board Fuse in fuse holder/battery Fuse in fuse holder/battery Fuse in fuse holder/battery Fuse in fuse holder/relay board Fresh air blower Cooling fan54 ServiceHere you can see the new special tools and workshop equipmentL a s h i n g s t r a p set (2 pcs.) T 100 38SSP 201_192SSP 201_193ApplicationBefore removing the rear axle, the Lupo must be lashed to the support arms of the lifting platform. For this purpose, the plugs must first be removed from the side members. The lashing straps on the left and right must then be fed through the holes in the side members and lashed securely.If the vehicle is not lashed securely, there is the danger that the vehicle will slide off the lifting platform because the front end of the vehicle bears most of the weight.55 Service.201For internal use only. © VOLKSWAGEN AG, Wolfsburg All rights reserved. Technical specifications subject to change without notice. 740.2810.15.00 Technical status: 08/97! This paper is produced from non-chlorine-bleached pulp.