TECHNICAL DOCUMENTATION

SSP 215 Painting the Vehicle The Topcoat

PDFEN52 pages3 MB
SSP 215 Painting the Vehicle The Topcoat - PDF cover

This PDF is currently unavailable.

Read document text
Service.Self-Study Programme 215Painting the Vehicle The TopcoatBasic Principles IntroductionThe first part of the topic v e h i c l e p a i n t i n g is described in Self-Study Programme 214, “Painting the Vehicle - Pre-Treatment”. Self Study Programme 215, “Painting the Vehicle The Topcoat”, expands on this theme. It provides basic, specialist, as well as practical knowledge and supplements the subject matter of SSP 214. Self-Study Programmes 214 and 215 were designed to provide an overview of the current state of vehicle paintwork. q SSP 214: Painting the Vehicle – Pre-Treatmentq SSP 215: Painting the Vehicle - The Topcoat215_001NEWCaution NoteThe self-study programme is not a workshop manual!Testing, adjustment and repair instructions may be found in the appropriate service material.2 At a GlanceVehicle Painting – Basic Principles . . . . . . . . . . . . . . . .4 An introduction to colours . . . . . . . . . . . . . . . . . . . . . . . 4 Composition of colours . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Matching the colours . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Types of topcoats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Equipment, Auxiliary Tools . . . . . . . . . . . . . . . . . . . . 20 Equipment in the paint workshop . . . . . . . . . . . . . . . . 20 Spray chambers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Equipment for mixing the paint . . . . . . . . . . . . . . . . . . 24 Tools and auxiliary devices. . . . . . . . . . . . . . . . . . . . . . 27 Sanding tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Application of the Topcoat . . . . . . . . . . . . . . . . . . . . . .34 Mixing and applying the topcoat . . . . . . . . . . . . . . . . 34 Basic requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Spray guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Check your Knowledge. . . . . . . . . . . . . . . . . . . . . . . . 46Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .503 Vehicle Painting – Basic PrinciplesAn introduction to coloursThe colour of objects is a matter of perception, which depends upon the characteristics of the object, the lighting and the eye that observes it. Colour is the brain’s interpretation of various natural phenomena which are captured by our sensory organs: the eyes. The phenomenon which stimulates the sensory organs is l i g h t . The various sources of light - such as the sun, light bulbs, fluorescent substances and fire - affect the eyes directly. Three elements must be present for the eyes to perceive c o l o u r : q The light Illuminates the object. q The object Reflects and absorbs light in various ways, depending on the composition and surface of the material. q The eye Receives the light reflected by an object. It then conveys the information to the brain, which interprets it as form and colour.LightEyeObject215_002Elements of colour perception4 Light That which we call light is electromagnetic radiation with a wavelength from 400 to 700 nanometers (1 nanometer = 1 thousandth of a micrometer = 1 millionth of a millimetre). Only these rays can stimulate the photosensitive cells of the human eye. They make up the so-called v i s i b l e s p e c t r u m of electromagnetic radiation. The various wavelengths are perceived as different colours: From violet (400 nm) to red (700 nm). When light contains t h e e n t i r e v i s i b l e s p e c t r u m and is distributed relatively evenly, it is called w h i t e l i g h t . White light is a combination of all colours and is also perceptible to the eye.Wavelength1000 m10 m1m1 cm0,1 mm 7 0 0 n m 4 0 0 n m10 nm 0,01 nmType of waveMWShort wavesTV/ Radar UKWMicrowavesInfraredV i s i b l e Ultraviolet X-rays lightGamma raysElectromagnetic rays215_003Issac Newton formulated a theory of the origin of the spectral colours. When white light is directed through a transparent quartz prism, the light splits up into the colours of the rainbow. The split is a result of each colour’s various angles of refraction.Quartz prism215_004Spectral analysis5 Vehicle Painting – Basic PrinciplesThe eye The cells of a human eye contain sensitive substances which react to the rays of the visible spectrum. Cells stimulated by incoming light send a nerve impulse to the brain. All of the information which the brain receives from these millions of cells make up the field of vision: forms and colours. There are three types of cells for the perception of colour: q Cells sensitive to red light q Cells sensitive to green light q Cells sensitive to blue light Colour perception is a result of the mixture of sensations of these three types of cells. The objects We see everything around us in various colours. Objects receive the light of different sources of light. The various materials which constitute an object can absorb all or part of the light and reflect the rest. The reflected light is received by the eye and recognised as colour. Example: q An object appears red when it absorbs green and blue rays and reflects red rays. q An object appears yellow when it absorbs blue rays and reflects red and green rays.Light receptors Eyeball Retinae hit W lig ht e hit WlightLensPupil Optic nerveThe human eye215_005Absorption characteristics of objects215_005A6 Metamerism The colour of an object depends upon the light which falls upon it. Light can have various compositions. Daylight is bluish, light from a light bulb is reddish. M e t a m e r i s m means: Two objects seen under one source of light have the same colour. But view both objects under a different source of light and they will take on different colours. When reproducing a vehicle’s colour from various base colours, it is very important to use the same pigments contained in vehicle’s original paint job. To ensure that two objects d o n o t show signs of colour variation (metamerism), both objects must have the same composition. Results for the repair paint job:Daylight (white)ed ur ) sh -c blui n a Cy reen (g o ollight215_006Metamerism7 Vehicle Painting – Basic PrinciplesComposition of coloursLight: Additive colour mixtures The entire pallet of colours can be reproduced by mixing the three colours r e d , g r e e n and b l u e in various intensities. That is why these three colours are called the primary colours of light. Pigments: Subtractive colour mixtures When a certain substance absorbs only one colour of light, i.e. one wavelength, the colour reflected is the result of two of the three colour receptors of the eye. These three colours are called p r i m a r y pigment colours.215_007A215_007BThe primary colours are added in various proportions; the combination is called additive colour mixtures. The colour television is based on this principle (RGB screen). q White - mixture of the three primary colours with maximum intensity. q Black - mixture of the three primary colours with 0 intensity.q C y a n absorbs red. q M a g e n t a absorbs green. q Y e l l o w absorbs blue. Mixing the pigments of two or three of these colours can reproduce the entire colour spectrum. A mixture of cyan and yellow pigments absorbs red and blue light and reflects green light (secondary pigment colour). The mixture of the three pigments does not result in white, because red, green and blue light is absorbed. The result is instead black, or a dark grey.215_007Additive colour mixture Subtractive colour mixture215_0088 Ostwald-chromatic circle, pigment-chromatic circle The pigment-chromatic circle - also called the Ostwald-chromatic circle - consists of all of the primary pigment colours and their mixtures. It is a template representing all of the colours which can be mixed from yellow, red and blue. The chromatic circle starts from a specific cyan pigment. Replace one of the primary pigments with another, deviating pigment and the result is different chromatic circles with different shades of colour in various mixtures. More than three colours are used in the mixing machine, however, because in reality not all colours can be mixed from the three primary colours.Primary colourYellowOrangeSecondary colourSecondary colourGreenRedPrimary colourBluePrimary colourSecondary colourPigment-chromatic circleViolet215_009The names cyan (sky blue) and magenta are often replaced by simply b l u e and r e d .Replacing the primary colours sky blue and fuchsia red with navy blue and orange-red, respectively, simplifies the names. These are then considered to be the three primary pigment colours. The mixtures of these three colours - g r e e n , o r a n g e and v i o l e t - are called secondary colours.9 Vehicle Painting – Basic PrinciplesMatching the coloursIdentification of colour and tendencies Knowing the vehicle’s paint number is essential to producing a topcoat paint. The colour code can be found on the body’s type plate. The identifying colour code is compared with the standard pattern and its possible colour variations. The colour variations result from analyses performed by the paint producers for the purpose of repair painting. The process includes a check for any possible deviations from the standard pattern.FarbtonPrüfkarteFarbtonBezeichnung: RezepturNummer: MPFNummer: RezepturBasislack-Teilenr. Kunde: Menge Nuance: Lacktyp:Fahrzeug:Muster Gefertigt am: von:000.5010.71.00215_010Type plate and colour codeVehicle paint jobs with the same colour code should have identical colours. Possible reasons for deviations (colour variations) from the standard pattern include: q Different paint suppliers for series production The paints produced by the respective paint suppliers exhibit permissible deviations from the standard pattern. These differences can increase even more among the various paint suppliers. q Different painting lines in the factory Slight differences in the parameters - such as layer thickness, drying time and temperature - can be detected in the various painting lines. q Natural ageing of the paint These are changes in the tone over the years - due to fading, for example.10 Painting samplesSample checkThe repair paint, along with the chosen colour, is mixed according to the instructions on microfilm. To ensure that the choice of paint is correct, a sample must first be sprayed. The following must be taken into consideration: q For single-coat painting, the 2C paint must be diluted with hardener and thinner before the vehicle can be painted. q For two-coat painting, thinner must be used during application of the paint, which is then coated with clear lacquer. q Only compare the colour after the sample is completely dry (a small kiln may be helpful). q The application of a topcoat on a sample should be carried out under the same conditions as on the vehicle.215_011q Samples used must have contrast marks (black lines on a white background, or black and white rectangles).Contrast marksComparison of the sample with the vehicle paint The following results are possible: q If the sample has the same colour as the vehicle paint, then the mixed colour can be applied to the part that is to be painted. q If the colour of the sample is different from the vehicle paint, then the colour needs to be corrected.An a n a l y s i s o f t h e c o l o u r d e v i a t i o n t e n d e n c i e s must be performed before the colour can be corrected.11 Vehicle Painting- Basic PrinciplesAnalysis of the tendencies The following colour deviations can occur: q T o n e compared to adjacent surfaces q P u r i t y of colour q B r i g h t n e s s of colour Deviation in tone A colour sample is placed in the pigmentchromatic circle, and a shift in one of the two directions is detected: One of the two tones is intensified. Deviation in purity A colour sample is placed in the pigmentchromatic circle, and a colour shift toward the centre of the chromatic circle or outer ring is detected. The pure colours are located on the edges of the pigment-chromatic circle. Towards the circle’s centre, the colours become “dirtier” due to mixing with other colours. The mixture of all of the colours without any tendencies takes place in the centre of the circle. Which means, black and all levels of grey are produced until finally white is reached. Deviation in brightness A colour sample is placed in the pigmentchromatic circle, and it is identical with the position of the vehicle paint. The colour shift, however, can be seen one level higher or lower, that is, one colour brighter or darker. The next page shows you an example of colour deviations.Vehicle colour and purity deviationVehicle colour and tone deviationVehicle colour and brightness deviation215_012Tendencies12 Concrete example of colour deviationsBlue GreenVehicle colour and purity deviationVioletVehicle colour and tone deviationVehicle colour and brightness deviationYellow OrangeRed215_009Analysis of colour deviationq Deviation in tone If the colour of the vehicle is orange: The colour sample can deviate in the direction of red or yellow. As a result, the vehicle colour will be either a reddish or yellowish orange. q Deviation in purity If the colour of the vehicle is green: The colour sample can have a deviation in the direction of either a more lively, pure green or a “dirtier” green (such as olive).q Deviation in brightness If the colour of the vehicle is red: The tone is correct but the colour sample can deviate in the direction of dark red (darker paint) or light red (lighter paint).13 Vehicle Painting- Basic PrinciplesCorrecting colour deviations Colour can be corrected by adding base paint. The paint added shifts the colour of the mixed paint in the chromatic-circle direction of the vehicle’s colour. Chromatic colours (= colours with a clearly defined colour trend, such as red a n d g r e e n ) usually require a tone correction, and often a brightness adjustment. Purity correction is most often necessary with achromatic colours (= colours with a neutral tendency, such as white, grey, beige). Tone correction A base paint, which counteracts the tendencies of the deviation determined, is added in order to correct the tone. If a colour sample of a green paint has become a bit too yellow, then a blue or green-bluish base paint is added.215_012ATone correctionA base paint is added to preclude the possibility of a m e t a m e r i s m effect (deviation of the colour of an object when viewed under different sources of light).Purity correction A paint with the exact opposite colour in the chromatic circle (= complementary colour) is used to correct the purity. If a colour sample of a grey paint has become a bit too yellow, then a more violet or bluish base paint is added.215_012BPurity correction14 Brightness correction Two options are available for correcting the brightness or brilliancy: Darkening the topcoat q For chromatic colour mixtures (such as red and green), black base paint is added. q For achromatic colour mixtures (such as white and grey),the predominant chromatic base colour is added to the original composition. Lightening the topcoat q White is added to pastel or mono colours. q The metallic primary colour with the largest grain is added to metallic colours. White may not be added because it cancels out the metallic effect.215_012CBrightness correction15 Vehicle Painting - Basic PrinciplesTypes of topcoatsVarious procedures are employed for applying the topcoat. T h e o n e - c o a t p r o c e d u r e and t h e t w o c o a t p r o c e d u r e are used most often. Certain two-coat paints with a pearl effect require the t h r e e - c o a t p r o c e d u r e . Topcoat and type of application The topcoat is resistant to sun rays, moisture, friction, etc. and protects the underlying layers. The application of the topcoat is the decisive criterion for assessing the quality of a paint job. Colour and shine are the decisive factors for the appearance of the paint job. Currently acrylic-polyurethane paints are used in vehicle repair due to their excellent finishing and protection properties. They are used as single-layer as well as doublelayer topcoat paints. Single-layer topcoat The paint coat is responsible for all of the important properties, such as resistance, hardness and degree of shine. Double-layer topcoat The two-layer base (base paint) is responsible for the colour. All of the remaining properties are taken care of by the clear lacquer.215_017Single-layer and two-layer topcoatsSingle-layer topcoat Single-layer topcoatPrimer extenderTwo-layer topcoatClear lacquerPrimer extenderTwo-layer baseOne-coat paint and clear lacquer are two-component acrylic paints which are nearly identical in their application.16 Types of topcoats In the s i n g l e - l a y e r p r o c e d u r e , the singlelayer topcoat, also called uni-topcoat, is applied with many covering pigments. The t w o - l a y e r p r o c e d u r e was developed mainly for the two-layer metallic topcoat. There are also uses for two-layer topcoats with permanent colours (uni-base paint). Since the introduction of the pearl effect, the twolayer procedure has been used for this type of paint. The desired colour effect depends completely on the thickness of the coat of paint and the base to which it is applied. The t h r e e - c o a t p r o c e d u r e is often required for pearl-effect paint jobs. Before the application of the pearl base, a colour base must be applied to the entire repaired area to ensure that the undercoat is covered.Single-layer topcoat Permanent, uni Topcoat Metallic paint (today rare)Two-layer topcoats Topcoat Permanent, uni Metallic paint Pearl colours or pearl effectThree-layer topcoats Pearl colours or pearl effectPigments:OpaqueMetallicPearl colours215_018Types of topcoats in the automobile industry17 Vehicle Painting - Basic PrinciplesPigmentation of the topcoat Topcoats may contain various types of pigments. These pigments determine the colour and the effect of the paint job. Pigments can be divided into three categories: q Topcoat pigments q Metallic pigments q Pearl-effect pigments Topcoat pigments The topcoat pigments are mineral or organic substances which are colour-fast and opaque. These pigments can be red, white, green or blue. Metallic pigments Metallic pigments are very fine aluminium platelets. They provide opacity and at the same time yield a metallic mirror finish. This finish takes on different appearances depending on the size and shape of the metallic pigment. The combination of metallic pigments and topcoat pigments produces metallic colours such as metallic red or metallic blue. If metallic pigments are used alone - i.e. without topcoat pigments - then the topcoat is called “silver”, “silver-grey” or “metallic grey”. Pearl-effect pigments The pearl-effect pigments (pearl colours) are produced from artificial materials and then coated with titanium oxide or iron oxide. The grain and coating of the pigments are transparent. Reflections and light refractions produce the chromatic effect (colour nuances) when rays of light penetrate the pigment. The thickness of the oxide layer determines the pearl effect: reddish, white, violet or golden. In order to attain complete opacity, the pearleffect pigment must be mixed with the topcoat pigment. Only then will the base be completely covered. Without the topcoat pigment, the undercoat colour alters the pearl effect.Pigments used when painting the vehicle.LightLightMetallic pigmentPigmentation of the topcoatPearl-effect or pearl-coloured pigment215_01918 Notes19 Equipment, Auxiliary ToolsEquipment in the paint workshopTo perform high-quality paint jobs, while observing all of the prescribed safety regulations, the paint workshop must possess the necessary equipment and the appropriate auxiliary tools. To achieve a high-quality paint finish at a reasonable price: All facilities, such as the preparation areas or spray chambers, all devices, such as compressors or distribution networks, all tools, such as spray guns or sanding machines, must be selectively and efficiently operated by t r a i n e d w o r k s h o p personnel. The s a f e t y a n d e n v i r o n m e n t a l p r o c e d u r e s are not a part of SelfStudy Programmes 214 and 215. Please refer to the customer-service materials for information on safety and ambient conditions when painting in the workshop.1 2 3 4 5 6 7Intake and exhaust ventilation with heating Injection channel with filter cover Suction removal Adjustment flap with drive Control panel Curtains for flexible separation Movable infrared beam field125 7634215_020Suction removal of extender and sanding dust20 A modern paint workshop should be equipped with the following facilities, devices and tools: q Sanding tools Manual, electric and pneumatic tools. q Tools for applying paint Spray guns q Devices for mixing the paint Mixing bench, microfilm reading device, precision scale, mixing stick, measuring stick, funnel viscometer, viscosity measuring beaker, paint filter q Auxiliary tools and devices For cleaning the parts: towels, soft cloths and dust cloths For cleaning the spray guns: spray-gun cleaning facilities For air supply: compressor, filter and pressure reducer q Sanding and priming equipment Under-pressure levelsq Facility for applying paint Spray chamber q Facilities for drying paint Drying chamber, infra-red devices, kiln215_020Preparation area Spray chamber215_02121 Equipment, Auxiliary ToolsSpray chamberThe spray chamber is the most important facility for carrying out a high-quality paint repair job. Regular maintenance and care is essential to ensure the proper functioning of the spray chamber - as well as a good paint job. The spray chamber is a closed room in which the vehicle or part to be painted is placed. It is equipped with vertical air circulation with induced downward flow, which carries off the spray mist. The air is directed from above by ceiling filters into the cabin and then warmed to the desired temperature by the heating system . The air is guided to the floor area - by the way of the object - and then sucked out via a paint-stop filter. Ceiling and paint-stop filters must be exchanged every so often, depending on the number of operating hours. The air passes through an active carbon filter to prevent solvents from being released into the environment. These filters must be replaced every so often, depending on the number of operating hours. Care and maintenance procedures include: Exchanging filters, cleaning the walls and luminous strips, as well as maintenance of the motor, burners and all add-on units. The volume of air blown into the cabin is slightly greater than the volume suctioned out. A slight excess of pressure is thus generated which spreads over grooves, seals and door gaps. Without this excess of pressure, unfiltered air from outside could make its way into the cabin and contaminate the painted areas. Luminous strips are located on the slanted part of the ceiling and, if possible, on the sides in order to ensure good lighting conditions all around. A combined spray/drying cabin with the drying chamber located on one side is the type most commonly used. All-in-one spray/drying cabins have a lower capacity and are usually preferred by smaller operations.22 Air outletAir inletFlow regulatorFlow regulator Plenum (filter mat) Pressure gaugeVentilation unit Heating system ThermometerSuction unitCarbon filterPaint-stop filter215_022Spray chamber23 Equipment, Auxiliary ToolsEquipment for mixing the paintA range of equipment is necessary to ensure the correct combination of colours and the proper mixture of thinner and hardener. q q q q q Mixing bench Microfilm reader Precision scale Computer scale Measuring stick and similar tools Mixing bench Various topcoat-paint containers are kept in the mixing bench. Every container is provided with a special cover and stirring tool. These are used to mix and dose the paint. Paint tends to separate in storage. It must therefore be stirred before use in order to yield a homogeneous mixture.Equipment for mixing the paintPrecision scale Microfilm readerMixing containers Mixing/measuring stick215_024Mixing bench24 Microfilm reader The microfilm reader, along with the microfilm and colour template, form the database containing all of the information on the composition of colours and colour mixtures. Precision scale The precision scale is an essential tool for combining primary colours, because the amounts added must be exact. The new generation of c o m p u t e r s c a l e s provides additional information on paints, tables for mixing colours, as well as mixing problems and their solutions.Measuring and mixing stick The materials to be added to the acrylic paint and primer extender can be easily measured and mixed with the aid of measuring and mixing sticks. Any amount of paint can be mixed, depending on the manufacturer’s specifications.Original Lack GrundlackGrundlack VerdünnerOriginal Lack DecklackOriginal Lack 2K FüllerOriginal Lack 2K Füller2:1Verdünner Härter Lack2:1Verdünner Härter Füller2:1Härter Verdünner Füller10+10% +5%109109+20%10+20%89 8+10%8 109+20% +5%7 88 7 7 10 9 8 7 4 6 5 4 2 3 2 1 1 1000.5010.41.008 7 96 7 6 9 6 5 8 5 7 4 6 3 5 3 4 2 3 2 1 1 2 3 2 2 1 1000.5010.70 00760 910 9 88 6 7 8 6 5 7 5 4 6 5 3 3 4 3 2 3 2 1 1 1 2 2 4 3 5 4 6 557 4 3 6 5 441215_026Measuring and mixing stick25 Equipment, Auxiliary ToolsBeaker for measuring viscosity The viscosity is checked with the aid of a viscosity-measuring beaker. The viscosity-measuring beaker is a funnelshaped container with a calibrated opening. The time it takes for the beaker to completely drain is measured. The longer the draining time, the higher the viscosity.Funnel vicosimeterStopwatch215_027Viscosity-measuring beakerPaint filter The mixed paint or primer must be inspected for foreign substances. The suspended particles must be filtered using a paint filter, to prevent both clogging of the spray gun deposition of particles on the coat of paint. Beaker and spray-gun filters are used to filter the particles.The correct filter must be used for each paint.215_028Spray-gun filter Beaker filter215_028A26 Tools and auxiliary devicesCompressed-air gun The compressed-air gun is connected to the workshop’s compressed-air system. It removes most of the residue from the sanded surface. A multi-nozzle is attached at the front. This special nozzle can a triple the lag effect at a constant air intake.215_030Compressed-air gunImpregnated dust cloth The impregnated dust cloth picks up dust particles especially well because it is impregnated with resin. Cleaning with an impregnated dust cloth takes place directly before the application of the top coat.Spray-gun cleaning facilities Spray guns, filler,containers and measuring sticks are cleaned with cleaning materials and solvents or universal cleaner. The spray-gun cleaning facility consists of an airtight chamber. The tools and equipment to be cleaned are placed in this chamber. When the cover is closed, a pneumatically driven pump distributes the solvent throughout the inside of the cleaning facility. The pump shuts off automatically once the wash cycle is complete or the cover is opened.215_029Spray-gun cleaning facilities27 Equipment, Auxiliary ToolsCompressors Since the paint is applied using compressed air, a workshop must be equipped with a compressor to supply enough pressure to maintain sufficient operational capacity. The compressor must be equipped with a water and oil separator. Purification filter and regulating manometer The compressed air for the spray and airpressure gun must be free of solid particles, fats, oils and water. Particles which are larger than 0.01 micrometer are caught and held back by the filter. The air pressure is adjusted according to the material to be sprayed. Shut-off valves with manometers must therefore be provided in order to regulate the pressure.215_031Compressor and filter unitExtender- and sanding-dust extraction systems These systems are used for preparation, priming and sanding tasks. The extraction system is located on the floor. It extracts residue from the primer-sanding and even from the spray.Under-pressure level215_032Extraction system28 Sanding toolsSandpaper Sandpaper in the shape of discs and sheets is rarely used directly in the hand. The sandpaper is instead attached to a sander. Manual sanding tools are available as blocks and planes. They are used for small sanding jobs or touch-up work. Electrically or pneumatically driven sanding machines are also available. Sanding disks and sanding sheets can be fastened to the tool in the following ways: q q q q q Clamp fitting Slot-in Manual positioning Self-adhesive backside of sanding paper Velcro-fastening system When using sanding machines that perform the sanding movement, the sandpaper must be securely attached to the sliding block. The selfadhesive and velcro-fastening systems are usually the best solution for these machines. The type of sliding block used with the sander depends upon the application. q A r i g i d sliding block does not adjust to the surface but rather “marks” it. It is usually used on even surfaces. q A f l e x i b l e sliding block adjusts to the contours of the surface. It is used for the fine-surface work (such as sanding the primer before application of topcoat).215_033Manual sanding tools29 Equipment, Auxiliary ToolsPneumatic and electric sanders Sanding tools are either pneumatically or electrically driven. Each type of drive has its advantages and disadvantages. For the majority of jobs, the pneumatic drive offers the most advantages. Primary characteristics of sanding drives: Pneumatic sanders q q q q Ajustable operating speed Low weight Do not heat up during extended operation Compressed-air system required Electric sanders q q q q q Non-adustable operating speed Heavier Heat up during extended operation No special operating equipment necessary Safety regulations for electric devices must be observedStart buttonSpeed regulatorSander body Compressed-air and suction hoseDisc or sliding block Sandpaper215_034Pneumatic sander30 Types of sanders Sanders are classified according to their sanding motion. Orbital sander The sand paper performs a rotating motion. The sliding block is round.Advantage: q Very aggressive sanding possible q Ideal for difficult sanding jobs q Fast sanding possible Disadvantage: q High heat development q Difficult to use on even surfaces Application: q Removing old layers of paint q Preparing panels for the application of filler q Removing rustSanding motion215_035Orbital sanderVibrating sander The sandpaper performs a vibrating motion. The sliding block is rectangular.Advantage: q Ideal for large, even areas q Large sanding surface Disadvantage: q Cannot be used on rounded surfaces q Vibrations, if the sliding block is not appropriately mounted q Cannot be used with a flexible sliding block Application: q Sanding even surfaces q Sanding polyester fillerSanding motion215_036Vibrating sander31 Equipment, Auxiliary ToolsOrbital vibrating sander The sand paper performs a rotating-vibrating motion. The sliding block is round. Advantage: q Good handling and high sanding power q Minimal heat development Disadvantage: q The sliding block must be guided flat to prevent the formation of sanding tracks q Not appropriate for sanding filler on a flat surface Application: q Sanding coats of paint q Well-suited to the final preparation of the primerSanding motionStroke in mm215_037Orbital vibrating sanderThe following should be observed: For c o a r s e s a n d i n g , such as filler, a machine with a 5-10 mm stroke should be employed. For fine sanding or sanded old paint, a device with a 3-5 mm stroke is employed. For more detailed information on sanding, please refer to the B a s i c P r i n c i p l e s chapter of Self-Study Programme 214, “Painting the Vehicle - Pre-Treatment”.32 Notes33 Application of the TopcoatMixing and applying the topcoatFor the optimal application of the topcoat, all of the parameters which can influence the process should be taken into account: hardener, thinner, processing temperature, adjustment and motion of the spray gun. Mixing single-coat paint A single-coat paint is mixed by adding hardener and thinner in a precise ratio. The ambient temperature is an important factor in the mixing process. The optimal processing temperature is between 18 °C and 25 °C. Mixing two-coat paint q Two-layer base The two-layer base is made of one component. Only thinner needs be added in order to adjust the viscosity. Various thinners may be used, depending on the temperature. q Clear lacquer For two-coat paint, clear lacquers with various qualities can be used as a topcoat. Hardener and thinner must be added to the lacquer - same as with the one-coat paint.Hardener (catalyst) Single-coat paint Mixing two-coat paintMixing single-coat paintThinner (Extender)Thinner (Extender) Base paintMixing clear lacquerThinner (Extender) Hardener (catalyst) Clear lacquer215_038Mixing34 Processing with the spray gun Producing a good topcoat without any application marks depends on many factors. These include: q q q q q Composition of the paint Thinner Ambient temperature Composition of the part that is to be sprayed Evaporation of the solventsEvaporation of the solvents (volatile bonding agents) The evaporation speed of the solvent is decisive in the formation of the paint coat. If the solvent evaporates too quickly, the coat of paint will not extend sufficiently. A wrinkled surface forms.Orange peel215_039If the solvent evaporates too slowly, the paint will separate. The result is the formation of drops or cracks. The evaporation curve of the processing temperature can be adjusted by mixing in the correct amount of thinner (extender). Various thinners are available for application at various temperatures. At higher processing temperatures, the thinner slows down the process of evaporation. At lower processing temperatures, the thinner accelerates the evaporation process.215_040Formation of drops and runs35 Application of the TopcoatSurface, coat of paint The injection pressure and the diameter of the nozzle opening determine the flow of paint as well as the amount of solvent which evaporates before reaching the part to be painted. Spraying distance The optimal working distance depends upon the type of paint, its viscosity and the spray gun. The spraying distance is normally between 15 and 20 centimetres. The greater the distance, the more the solvent evaporates, and as a result the paint spreads poorly (orange peel). The smaller the distance, the higher the concentration of paint and proportion of solvent, causing “runs” to form. Humidity A relative humidity of 80% slows down the process of solvent evaporation. Very low humidity - under 20% speeds up the process of evaporation. Both conditions can lead to a poor drying result.High pressure Low pressure Decisive factors in the formation of the coat of paint Imperfectly spread coat of paint Perfectly spread coat of paint Contracted coat of paintOrange peelRunsHigh viscosityLow viscosityComposition of paintHigh temperatureLow temperatureProcessing temperatureProcessing pressureDistance of the spray gun215_041Factors which influence the coat of paint36 Basic requirementsPainting with a spray gunTo produce a high quality paint job, the spraying process must satisfy certain basic requirements. q Mix the paint according to the instructions on the datasheet (manual). q Monitor the ambient temperature and decide what sort of hardener or thinner should be used. q Maintain the spraying distance. The spray gun must always held vertically to the area that is to be painted (see following chapter). q For an even coating, guide the spray gun evenly. q Do not pull back the spray gun trigger until the gun is set in motion. Release the trigger while the gun is still in motion. q The distance between strokes should not be too large. Each pass must cover half of the previous pass.SlowerNormal thinner Faster thinnerManualthinnerSpray guns and settings ApplicationProduct to be processedApplication distanceSweeping motionPosition of the spray gun215_042Basic requirements37 Application of the TopcoatSpray gunsAn absolutely even coating thickness with a smooth paint surface can be achieved with the aid of a spray gun. The spray gun is the most important tool for any paint job. Regular maintenance, complete cleaning after every use and careful handling of all the parts of a spray gun are essential for a high-quality topcoat. How the spray gun works Through the supply of a compressed stream of air and the design of the spray gun, the paint is entrained (Venturi principle) and then released from the nozzle. If the paint container is attached over the spray gun, it is called a j e t p i s t o l , and if it is attached under the spray gun it is called a s u c t i o n pistol. When you pull back the trigger to the first pressure point, only the compressed air valve opens. If you pull it back further, the nozzle needle shifts, and the paint shoots out from the air stream at a high speed. The mist, made up of micro drops, is formed by this process. The air pressure determines the size of the droplets: High pressure = small droplets Low pressure = large droplets215_043Jet pistol215_04438Suction pistol Cross section of a jet pistolThe correct nozzle must be chosen for the application of the different types of paints . Greater paint visocosity requires a larger nozzle diameter. The point at which the paint and air emerge from the nozzle is called the “hot spot”. The size of the nozzle is specified in millimetres.Paint containerNozzle with a head or mouthpiece Amount regulator Pressure regulatorHot spotNozzle needleThe quality of a spray gun depends upon its headpiece. The spray gun contains air channels which end at the headpiece. These determine the form of the paint stream. The projection form is a cone. A larger spray cone has a higher concentration of paint and a smaller spray cone has a lower concentration.TriggerCompressed-air connection215_04539 Application of the TopcoatAdjusting the spray gun The spray gun must be adjusted to give the spray cone the optimal size and shape.Adjustment knobs on the gun Paint mark or coneDistance and projection215_046Spray coneq The spray regulator can progressively adjust the stream from a circular-section jet to fan jet. q The flow-rate adjustment knob regulates the amount of paint applied. A sample spray on a carton or piece of sheet metal - from the correct distance - is the simplest way to check the spray gun settings.q The air-flow knob adjusts the air pressure. The working pressure is chosen based on the material and technical specifications. For conventional spray guns, the working pressure is between 3 and 5 bars. The adjustment knob can also be used to adjust the shape of the cone.Spray adjustment: The spray cone is progressively adjustable from wide to round.Amount adjustment: A spray sample is the simplest way to adjust the amount of paint sprayed.Working pressure regulator: The working pressure is adjusted depending on the material and technical specifications.215_04740Adjusting the spray gun Spraying the paint The distance between the piece to be painted and the spray gun must remain constant. The speed at which the spray gun is guided must also be even and constant. HLVP spray guns The HLVP spray gun (high volume, low pressure) can apply paint at a very low working pressure. The projection cone (paint-air mixture) can be adjusted to make better use of the paint at a lower pressure. The result is that less paint goes beyond the part that is to be painted. Using an HLVP spray gun reduces the overall amount of paint consumed. At the same time, less solvent evaporates into the atmosphere.215_048Spraying the paint41 Application of the TopcoatDryingFor fast drying and hardening of paint, the workshop must possess the appropriate facilities and devices. Spray/drying cabins The spray/drying cabin is a combination of a spray cabin and drying chamber (see page 23). In the drying chamber, the air can be warmed to up to approximately 60 °C. This temperature accelerates the chemical reaction as well as the evaporation of the solvent and thinner (extender) contained in the paint. The temperature may only be increased in stages. These stages are automatically controlled by the drying chamber.215_049ACombination spray/drying cabin with water filterIf the drying temperature rises too fast, the result may be the formation of bubbles.Cause of bubble formation When temperatures rise too quickly, the paint surface dries up first (skin formation). Solvent cannot evaporate from the paint coat into the atmosphere. The result is the formation of bubbles. After the application of the top coat, a drying time of 10 minutes must be observed to allow the volatile solvents to evaporate.215_05042Bubble formation Infrared drier In an infrared drier, thermal radiation - as opposed to the thermal conduction (convection) of a drying chamber - is responsible for the drying process. Only after the underlying panel has become warm does the warmth carry over to the coat of paint. Advantage: The drying process starts from within and continues outwards. The drying time is shorter than with the warm-air system. The following must be observed: q The ventilation time of the paint before the infrared drier is turned on q The distance between the infrared drier and the surfaceq The duration of the radiation The infrared drier is most commonly used for drying filler and primer. The time between steps is shortened without having to use the spray/drying cabin. The spray/drying cabin can be used exclusively for the application and drying of the topcoat (see graphic Page 20).Infrared drier radiation There are two types of infrared driers: q Infrared drier with short-wave radiation q Infrared drier with medium-wave radiationInfrared radiationSteel panelPaint coatThe drying process starts from within and continues outwards.Thermal radiation215_05243 Application of the TopcoatThe s h o r t - w a v e devices generate radiation by means of quartz tubes. They emit rays which lie within the field of vision (a red/orange-coloured light). The working temperature is reached within seconds, and the cooling follows quickly. The drying time is short because the rays are intense. The m e d i u m - w a v e s devices generate the rays by means of ceramic plates. They emit rays which lie outside the field of vision. They give off heat when in operation. The working temperature is reached after a few minutes, the cooling process also takes some time. The drying time is longer than with the shortwave devices.Drying times-infrared drier(Example at 80cm distance)MaterialPolyester filler Spray filler Water-based primer extender Primer TopcoatDrying time2 minutes 2 to 7 minutes 7 to 9 minutes 3 to 8 minutes 7 to 10 minutesWarm-air drierWarm air Steel panelPaint coatThe drying process starts from outside and continues inwards. 44Thermal conduction215_051 Notes45 Check Your Knowledge1.) A B C What is light? Electromagnetic rays with waveslengths between 400 and 700 nanometers. Electromagnetic rays with wavelengths between 100 and 300 nanometers. The visible spectrum of electromagnetic radiation.2.) A B CWhen does an object appear yellow to the human eye? When the object absorbs red radiation are and reflects green and blue. When the object absorbs blue radiation and reflects red and green. When the object obsorbs green radiation and reflects blue and red.3.) AWhat does metamerism mean? Two objects viewed under the same source of light have the same colour, and viewed under a different source of light have different colours. Two objects have different colours viewed under each source of light. Two objects have the same colour viewed under each source of light.B C4.) AWhat is the Ostwald-chromatic circle? The representation of the primary pigment colours and their mixtures in a pigment-chromatic circle. The representation of all the colours that can be mixed from red, yellow and blue. The representation of all of the colours that can be mixed from secondary colours.B C46 5.) A B C DHow can the colour of a sample spray deviate from that of the vehicle? Tone Degree of shine Purity Brightness6.) A B CWhich types of topcoat paints are most commonly used? One-layer topcoat Two-layer topcoat Three-layer topcoat7.) A B C DCovering pigments may consist of which materials? Mineral/organic substances Aluminium platelets Synthetic core with an enamel coat Synthetic material with a layer of oxide8.) A B CWhat volume of air must be blown into a spray chamber? The same volume as drawn out of the spray chamber A smaller volume than drawn out of the spray chamber A larger volume than drawn out of the spray chamber47 Check Your Knowledge9.) A B C D What information does the new generation of computer scales provide? Information about paints Information about colour-mixing tables Information about mixing problems Information about painting equipment10.) What does a viscosity beaker measure? A B C The volume of the paint The thickness of the paint The density of the paint11.) A B C DWhich of the following describes the compressed-air properties required by a spray gun? It must be free of solid particles and water Highly compressed Free of fats and oils Pre-heated12.) A B CWhich sliding block is best suited to finish-sanding a coat of paint? Flexible sliding block Rigid sliding block Rectangular sliding block48 13.) A B C DThe vibrating sander with a rectangular sliding block is best suited to which application? Removing old layers of paint Removing rust Sanding even surfaces Sanding polyester filler14.) A B C DWhich factors are decisive in the formation of a paint coat? Spraying pressure Spraying distance Composition of the paint Humidity15.) A B C DWhich rules must be observed when painting with a spray gun? The spraying distance must be maintained The spray gun must always be guided at an even and constant speed The cone must be as small as possible The spray gun must be vertical to the surface16.) A B C DWhat advantages does an HLVP spray gun offer? Better utilisation of the paint Shorter painting time Lower consumption of paint Less evaporation of the solvent into the atmosphere49 GlossaryAbsorbTo absorb; to occupy completelyColourantsMostly organic compounds, which can colour other materials so that they are more or less wash-resistant. One differentiates between natural colourants, such as carmine, purple, indigo, and artificial (synthetic) colourants. Those groups responsible for colours in their molecules are called chromophore groups (chromophores), through these, colourless compounds become colourants (chromogens); groups with characteristics of an acid have a colour strengthening effect (these are called auxochromes groups or auxochromes).Absorption1) Physics: The partial or complete absorption of electromagnetic waves or particle radiation while passing through matter. The energy of the absorbed rays is converted to heat (absorption heat). 2) Chemistry: The absorption of gases and vapours through liquids or solid bodies and the even distribution within the absorbing substance. 3) Biology: The absorption of liquids, vapours, etc. via the cells.FluoresceTo illuminate (material) ba means of radiation (such as light)AcrylicSynthetic material made of polyacrylonitrileCatalyst1) Chemistry: Substance which even in slight amounts changes the speed of a chemical reaction (catalyse), usually accelerating, without itself being used up. Important catalysts include vanadium oxide, platinum, peroxide, active coal, metalorganic complex compounds and ion exchangers. 2) Technical: Catalytic converterChromoModifier with the meaning ›colour‹, ›pigment‹CyanideSalts from hydrogen cyanide; very poisonous; technically important intermediate productsComplementary colours(Supplementary colours), colour stimulus specifications which become white with additive mixtures, and with subtractive mixtures become very dark, almost black; examples inclued yellow and blue, cyan and red, purple and green.ChromaticsScience of colours as an optical phenomenon (perception), as colour-causing agent (paint), colour, pigment, as variegation (in their entirety to achromatic = white, grey, black), as electromagnetic tadiation (light with specific wavelengths). A sensation of a colour in general occurs through the reaction of visible light (wavelength range 400700 nm) on the eye’s colour-sensitive retinal cones. The manifestation of colours are the colourful lights (primary source of light) and the body colours (non-primary sources of light). The tone is the characteristic of all variegated colours. The greater or less strength of the emergence of the tone in a variegated colour determines the saturation. Every colour has a luminosity. Each colour can be clearly described with the aid of these three characteristics . In a colour system, a legally-determined selection made from the range of possible colours, which are colorimetrically defined, is perceived by the viewer in equal increments across the spectrum. The DIN colour system uses as a certification of the colours: tone (T), chroma/saturation (scale) (S) and blackness value (D); a colour is also labelled using the colour symbols T:S:D e.g. 3:6:2. The colour measurement serves as a determination of the 3 colorimetricals which indicate a colour stimulus specification. These numbers are in general specific to a certain colour temperature.MagentaIn the printing industry, the designation for the primary colour purple, aniline redMetamerismProperty of spectrally different chromatic stimuli, which trigger the same colour perception.NanometerOne thousand millionth of a meter, symbol: nmNewtonEighteenth century English mathematician, physicist and astronomer.50 OstwaldOstwald, Wilhelm, *)Riga 2.9. 1853, †)Großbothen near Grimma 4.4. 1932, German chemist and philosopher .Phenomenon1) Philosophy: Appearance 2) General: Exceptional occurrence, event; person with exceptional talentsPolyurethaneSynthetic material, multi-purposeReceptorsThe sensation faculties of a living cell (or organ) for the reception of certain stimuli. According to type of adequate stimuli one differentiates among chemo-, osmo-, thermo-, mechano-, photo-, phono- receptors, according to the location in the organism, extero receptors (on the body’s periphery; for the reception of exterior stimulation) and internal receptors (within the body).Receptor(mostly plural) Ends of nerve fibre or specialised cells in the skin and in the internal organs for the reception of stimuli.Spectral coloursThe unmixed, pure colours of a spectral breakdown of the light (7 main colours of varying wavelength, which can no longer be broken down)ThinnerFast or slow setting / attractive (volatile) substances which are mixed with the finished solutions.ViscosityViscosity, inner friction, that property of a liquid or a gaseous medium (fluids), which, during deformation, yields friction tensions in addition to thermodynamic pressure, working against the displacement of liquid or gaseous particles.Solutions to the test questions:1: A, C/ 2: B/ 3: A/ 4: A, B/ 5: A, C, D / 6: A, B/ 7: A/ 8: C/ 9: A, B, C/ 10: B/ 11: A, C/ 12: A / 13: C/ D 14: A, B, C D / 15: A, B, D / 16: A, C, D51 215SSDiverseDiverseABABSSABABOnly for internal use © VOLKSWAGEN AG, Wolfsburg All rights reserved 940.28100.34.20 Issued 02/99Y No chlorine was used to bleach this paperduring manufacture.