TECHNICAL DOCUMENTATION
SSP 339 The Passat 2006

This PDF is currently unavailable.
Read document text
Service TrainingSelf-study programme 339The Passat 2006The Passat – the unique comfort experienceS339_002The Passat will continue its success story spanning over 30 years with the 2006 model. It will thrill customers by offering a new level of comfort in the upper mid-size class. This is achieved by the fact that the Passat 2006 already meets luxury class quality, safety and design standards. It continues to offer the economy traditional in the mid-size class. The drive concept fitted in the Passat 2006 has been redesigned to achieve these outstanding characteristics. The engine is mounted in the classic transverse configuration.Passat model year 2006 product characteristics:● ● ●All-encompassing comfort Characteristic design and product aesthetics Excellent quality● ● ●Uncompromising safety Generous amount of space and variability High level of economySeparate self-study programmes are available on the following topics:● ● ●SSP 340 SSP 346 SSP 347The Passat 2006 - electrical system The electromechanical parking brake Tyre pressure monitor systems NEW Attention NoteThe self-study programme portrays the design and function of new developments! The contents will not be updated.For current testing, adjustment and repair instructions, please refer to the customer service literature intended for this purpose.2At a glanceIn brief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Occupant protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Power transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Running gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Electrical system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Heater and air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Radio and navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 723In briefThe Passat model year 2006Where will the new Passat 2006 be built?Like its predecessor, the new Passat will also be built in the Emden and Zwickau plants.VW's Emden plantThe Emden plant, in which the majority of the Passat model vehicles will be built, was the first automobile production plant to be certified in Europe in September 1995. Up to December 2004, some 5.1 million Passats had been produced in the Emden plant.S339_0984EmdenZwickauS339_011VW's Zwickau/Mosel plantIn Zwickau/Mosel, around 1150 Golfs and Passats are manufactured each day, in both left and right-hand drive versions, for all markets from Japan to North America. In January 2003, the one millionth Passat rolled off the assembly line in Zwickau/Mosel.S339_003S339_0055In briefThe Passat 2006The Passat 2006 will point the way forward in many disciplines, e.g. Design Vehicle dynamics Drive technology Spatial availability Safety Quality●Dual-zone Climatronic●Light assist●Transversely mounted engine●Bluetooth premium mobile phone pre-installation●Cornering light system with bi-xenon●Adaptive Cruise Control●Comfortable key concept6●High-end sound system●Boot lid easy opening●Rear lights with LED technologyS339_006●Multi-link rear suspension●Electromechanical parking brake●Tyre pressure monitor systems●230V socket7In briefTechnical dataPassat saloon 2006S339_007S339_009 S339_008Length Width Height Wheelbase Roof load Trailed load (braked)4765 mm 1820 mm 1472 mm 2709 mm 100 kg 1300 kgFront track Rear track Permissible gross vehicle weight Unladen weight without driver Drag coefficient Fuel tank capacity1552 mm 1551 mm 1950 kg 1391 kg 0.281 cd 70 litres8Interior dimensionsS339_010S339_0121 2 3 4Headroom, front Headroom, rear Interior length Luggage compartment volume973 mm 961 mm 1797 mm 565 litres** Including 80 litres in the spare wheel recess storage space9BodyThe body structureThe new Passat's body has been optimised in terms of the following focal points:● ● ● ●A-pillarPassive safety Lightweight design Comfort Pedestrian protectionThis has been achieved by using high- and ultra-highstrength steel panels and ultra-high-strength, hotformed steel panels. The steel panel thicknesses have additionally been optimised forthe relevant stresses.The following assemblies are manufactured from ultra-high-strength steel panels:Front bumper cross member● ● ● ●Cross members in the footwell areaThe inner A-pillar The seat brackets The outer sills The rear longitudinal membersThe following assemblies are manufactured from ultra-high-strength, hot-formed steel panels:● ● ● ● ● ●The front bumper cross member The cross members in the footwell area Inner sills The centre tunnel The A-pillar/roof frame area The B-pillarS339_152 Centre tunnel10Centre tunnelRoof frame B-pillarLongitudinal memberS339_018Ultra-high-strength, hot-formed 1000 MPaUltra-high-strength 300 - 420 MPa Outer sills Inner sills Seat brackets Higher-strength 260 - 300 MPa S339_081 High-strength 180 - 240 MPa Steel panels 140 MPaWhat are ultra-high-strength, hot-formed steel panels? These are steel panels which, as the name implies, are formed when hot at temperatures of between 900 °C and 950 °C. The steel panels are provided with their high strength thanks to a specific cooling process in the forming die. They are form-hardened. The use of ultra-high-strength, hot-formed steel panels has enabled the body weight to be lowered by approx. 20 kg without reducing the strength.Yield strengths of the steel panels which are used:● ● ● ●●Steel panels up to 140 MPa High-strength steel panels from 180 to 240 MPa Higher-strength steel panels from 260 to 300 MPa Ultra-high-strength steel panels from 300 to 420 MPa Ultra-high-strength, hot-formed steel panels over 1000 MPa1 MPa = 1 Newton/mm211BodyThe joining techniquesThanks to the use of laser welded and soldered joints and spot welded/bonded joints, the body structure is safeguarded in the event of a crash.S339_019Laser welding Spot welding and bondingThe following joining techniques are employed: Laser welds● ● ● ● ● ●Spot weld bonds●in the area of the door apertures on the front and rear roof member on the lateral windscreen frame in the area of the front wheel housing in the area of the lower rear window frame on the rear cross panel● ●in the area of the longitudinal member to the floor panel in the area of the lower sill in the area of the rear wheel housingLaser soldered joints● ●in the roof skin side panel/luggage compartment sealing duct12The flow of force in a frontal crashIn the event of a frontal crash, the forces which occur are guided into the floor panel and the roof longitudinal members via the upper and lower longitudinal members.Side vieworces from frontal crashView from belowS339_020In the event of a lateral crash, the passenger survival space is ensured by means of a triple-shell side wall. This is supported on the underlying body structure. The side wall's main component is the B-pillar, comprised of hot-formed steel panels. In the floor panel, the B-pillar is supported on the ultra-high-strength steel seat bracket. In the roof, it is supported on the high-strength steel roof cross member.The body colours correspond to the assignment of the steel panel grades from the body structure depiction.13BodyThe seatsThe front seats4-way lumbar supportS339_021Seat railsSeat guidance and adjustment are carried out via parallel seat rails. This results in finer adjustment in comparison with the predecessor's central adjustment rail. Mechanical 2-way and electric 4-way lumbar support adjustment are optionally available. All seat variants are fitted with the familiar Active Head Restraint System AKS. A seat with a massage function in the backrest is available as an additional option.S339_022 Head restraint adjustment is carried out via an integrated actuation mechanism.14The front passenger seat with through-loading functionWith this optional seat, the seat backrest can be folded horizontally forwards by actuating the release lever. This enables the vehicle's entire passenger compartment length to be used as transportation space.Front passenger seat in through-loading positionRelease leverS339_023The seat occupied recognition systemThe front passenger seat is fitted with a seat occupied recognition sensor. This is located under the seat cover on the padded cushion. If the sensor reports that the front passenger seat is occupied and the belt buckle simultaneously outputs a signal that the buckle tab is not inserted, the front passenger is optically and acoustically requested to don his seat belt.Sensor for the seat occupied recognition system S339_02415BodyThe rear seatsThe rear seat bench is split 1/3 to 2/3. The seat backrests can be individually folded.S339_026The backrest locking mechanismThe backrests are locked by means of a rotary latch lock. If the backrest is not locked, this is displayed via a red indicator.IndicatorBody bowRotary latch lock S339_02816The integrated child seatsA rear seat bench with two integrated child seats is optionally available.Seat cushion not raised Lateral bolsters, can be folded upSeat cushion raisedHandle for raisingFootrest Raising mechanismS339_029The seat cushions on the outer seats can be raised. This serves to raise the seat for small children.After raising the seat cushion, the lateral bolsters have to be raised manually. On folding down, these automatically return to their original position.17BodyThe door lockThe door locks are actuated by means of a Bowden cable between the door handle and the door lock.Lock actuation mechanismBoltLeverLever fulcrum Bowden cable Door lockS339_118The lock cylinderWhen installed, the lock cylinder is clamped into the lock actuation mechanism via a lever. To do this, the lever is pivoted around its fulcrum by turning the bolt.Lock cylinder not clamped … Lock actuation mechanism BoltLock cylinder clamped …BoltLeverLeverAperture for lock cylinderLever fulcrum S339_133 S339_14818The rear window roller blindThe rear window roller blind is available as either a mechanical or an electric version.●●In the mechanical variant, the roller blind is pulled up via a handle and is locked in this position. The electric variant is actuated using a button in the centre console.ButtonRear window roller blind, upper terminal position S339_038The electric rear window roller blindHow it works: The rear window roller blind guides are located in the C-pillars. After pressing the button, a drive motor pushes a sliding block located in each guide upwards via two Bowden cables. The rear window roller blind is secured to these sliding blocks. In its upper terminal position, the drive motor is deactivated via an electronic force limiter. This prevents body parts from becoming trapped between the rear window roller blind and the surrounding trim components.S339_031Pressing the button again causes the rear window roller blind to retract into the rear shelf. It is integrated flush into the rear shelf.Sliding block in the guide (not visible)Rear window roller blind, upper terminal position Guide slotGuideGuides for Bowden cablesRear window roller blind, lower terminal position Drive motor S339_13419Occupant protectionIntroductionThe Passat is equipped with the following airbags:● ● ●Two-stage driver and front passenger airbags Head airbags Side airbags (optional in the rear)The outer seats are fitted with seat belts with belt tension limiters. Front seat belt pre-tensioners are fitted as standard. Seat belt pre-tensioners are optionally available for the outer rear seats.The two-stage airbagsThe new Passat is equipped with two-stage airbags on the driver and front passenger side; these inflate to different levels according to the accident severity. Together with the installation position selected for the front passenger airbag, in the upper part of the dash panel, optimal occupant restraint is achieved with minimal risk of injury in the event of a frontal crash thanks to the airbags' activation. The Passat's airbag activation system is comprised of an airbag control unit secured in the front area of the frame tunnel; this is equipped with three internal acceleration sensors (two sensors in the vehicle longitudinal direction and one in the vehicle transverse direction), an early crash sensor in the area of the bonnet lock for supporting front crash detection and 4 sensors for lateral crash detection. Two sensors are designed as pressure sensors and are located in both front doors. During a lateral collision, these sensors measure the rise in air pressure caused by front door deformation.Early crash sensorS339_12020Belt buckles with belt buckle interrogation are fitted on the driver and front passenger side. The front passenger seat is additionally equipped with seat occupied recognition, which is carried out via a sensor on the seat padding. Belt buckle interrogation and seat occupied recognition serve as a seat belt prompt system.The front passenger airbag can be deactivated via a key switch in the glove box.S339_034In the event of collisions which directly damage the front doors, this sensor concept is significantly faster and more robust than conventional measurement of the vehicle's lateral acceleration. In addition, two acceleration sensors are also installed in the lower area of the C-pillar to detect lateral collisions, which do not deform the front doors, in good time.In the event of lateral collisions which exclusively affect the front of the vehicle, the vehicle lateral acceleration measured in the airbag control unit is used for crash detection purposes. Rear crash detection is carried out using the two vehicle longitudinal acceleration sensors in the airbag control unit.21Occupant protectionThe two-stage airbagsTwo separate igniter circuits and charges are fitted within the two-stage airbags. Both stages are always deployed in the event of an accident. However, the deployment times are staggered depending on the accident severity. In a minor accident, the time between deployment of the two stages is greater than in the event of a severe accident.Airbag inflation levelAirbag inflation levelMinor accidentSevere accident2nd stageSevere accidentMinor accident1st stageTimeAirbag inflation level1st stage2nd stageTimeS339_150 Ignition of an airbag stageThe time gap between the deployment of both stages influences the airbag's inflation level: If the second stage is deployed later, the airbag's pressure from initial deployment has already dissipated somewhat, and the airbag inflation level is relatively low. If both stages are deployed shortly after each other, the airbag's pressure from initial deployment has not yet been dissipated, and the airbag becomes harder.22The seat belt pre-tensionersThe outer, rear seats in the Passat 2006 are fitted with a new type of seat belt pre-tensioner.Structure: The belt strap is guided through the deflector in the lower area of the C-pillar. It is held by a cable which leads into the seat belt pretensioner. The cable is firmly anchored in the seat belt pretensioner. How it works: If the seat belt pre-tensioner receives the deployment signal from the airbag control unit, the pyrotechnical propellant charge is ignited. The force which is built up pushes the piston in the direction of the arrow. As a result, the cable which is secured to the piston is carried along and now tensions the seat belt in turn.DeflectorS339_149Seat belt pre-tensionerDeflectorCableConnectorPistonS339_039 Jacket tubeGaskets Pyrotechnical propellant charge23EnginesEngine-gearbox combinationsPetrol engine 5-speed manual gearbox 0AH 5-speed manual gearbox 0A4Diesel engine1.6l/75 kW Petrol engine BSE1.6l/85 kW FSI engine BLF2.0l/110 kW FSI engine BLR2.0l/147 kW FSI engine (turbocharged engine) AXX1.9l/77 kW TDI engine BKC2.0l/103 kW 4V TDI engine BKP 2.0l/103 kW 2V TDI engine with diesel particulate filter BMP246-speed manual gearbox 0AJ6-speed manual gearbox 02S6-speed manual gearbox 02QDirectShift Gearbox 02E6-speed automatic gearbox 09G25EnginesThe 1.6l/75 kW engine with 2-valve technologyThe 1.6l/75 kW engine is based on the familiar 1.6 l/ 75 kW engine with the engine code BGU, which is fitted in the Golf 2004. Special technical features● ● ● ● ●●●2-valve roller rocker fingers aluminium engine block with ribbed oil pan secondary air system plastic variable intake manifold pressure sensor-controlled system, previously hot film air mass sensor (HFM) omission of the crankcase breather, ventilation via the cylinder head only omission of the exhaust gas recirculation systemS339_040Technical dataEngine code Design type Displacement Bore Stroke Valves per cylinder Compression ratio Max. output Max. torque Engine management system Fuel BSE 4-cylinder in-line engine 1595 cm3 81 mm 77.4 mm Torque (Nm) 2 10.3 : 1 75 kW at 5600 rpm 148 Nm at 3800 rpm Simos 7.2 Super unleaded RON 95 (Normal unleaded RON 91 with slight reduction in output) Primary catalytic converter probe: linear lambda probe, secondary catalytic converter probe: transient probe EU 4Torque and output graphExhaust gas aftertreatmentEngine speed (rpm)S339_041Exhaust emission standard26Output (kW)The 1.6l/85 kW FSI engineThis engine originates from the Golf 2004. It differs from this only due to its switch to lambda 1 operation and super unleaded RON 95. Special technical features Stratified charge and homogeneous lean operation have been omitted due to the switch to lambda 1 (homogeneous operation). This leads to the occurrence of less nitrogen oxide, and the omission of complex trapping and regeneration of this. This leads to the following changes:●S339_042●●The exhaust gas temperature sender has been omitted instead of the NOx storage reduction catalytic converter, a three-way catalytic converter has been installed instead of the NOx sender, a transient lambda probe has been installed.The switch from super plus RON 98 to super unleaded RON 95 is achieved via ignition angle adjustment. Operation with RON 91 is not permitted, as ignition is retarded to the control limits in this case.Technical dataEngine code Design type Displacement Bore Stroke Valves per cylinder Compression ratio Max. output Max. torque Engine management system Fuel BLF 4-cylinder in-line engine 1598 cm3 76.5 mm 86.9 mm Torque (Nm) 4 12 : 1 85 kW at 6000 rpm 155 Nm at 4000 rpm Bosch Motronic MED 9.5.10 Super unleaded with RON 95 (super plus RON 98 leads to an increase in torque in the medium engine speed range) Primary catalytic converter, main catalytic converter, lambda control EU 4Torque and output graphExhaust gas aftertreatmentEngine speed (rpm)S339_043Exhaust emission standardInformation on the fuel system can be found in self-study programme 334 "The FSI engine fuel system".Output (kW)27EnginesThe 2.0l/110 kW FSI engine with 4-valve technologyThe 2.0l/110 kW FSI engine dispenses with stratified charging and the NOx sensor system. The abbreviation FSI will be retained. Special technical features● ●●● ●● ● ●ethanol-resistant Hitachi high-pressure pump two overhead camshafts with continuous intake camshaft adjustment roller rocker fingers with hydraulic supporting element balancer shaft gear assembly plastic variable intake manifold with change-over barrel continuously variable tumble flaps water-cooled exhaust gas recirculation homogeneous fuel injectionS339_044Further information on this engine can be found in SSP 322 "The 2.0l/110 kW engine with direct petrol injection".Technical dataEngine code Design type Displacement Bore Stroke Valves per cylinder Compression ratio Max. output Max. torque Engine management system Fuel BLR 4-cylinder in-line engine 1984 cm3 82.5 mm 92.8 mm Torque (Nm)Torque and output graph11.5 : 1 110 kW at 6000 rpm 200 Nm at 3500 rpm Bosch Motronic MED 9.5.10 Super plus unleaded RON 98 (Super unleaded RON 95 with slight reduction in output) Two primary catalytic converters and one threeway catalytic converter with oxygen control EU 4Exhaust gas aftertreatmentEngine speed (rpm)Exhaust emission standardS339_04528Output (kW)4The 2.0l/147 kW turbo FSI engine with 4-valve technologyA further developed turbo FSI engine is to follow on the basis of the 2.0l/110 kW engine. The turbo FSI engine was first launched in 2004 in the Audi A3 Sportback and the Golf GTI. Special technical features●● ● ● ●●single-branch exhaust system with underhood primary and underfloor catalytic converter ethanol-resistant Hitachi high-pressure pump return-free fuel system homogeneous fuel injection decoupled drive sprocket in the balancer shaft gear assembly elliptical toothed belt sprocket on the crankshaftS339_046Further information on this engine can be found in SSP 337 "The 2.0l FSI engine with turbocharging".Technical dataEngine code Design type Displacement Bore Stroke Compression ratio Max. output Max. torque Engine management system Camshaft adjustment Fuel AXX 4-cylinder in-line engine 1984 cm3 82.5 mm 92.8 mm Torque (Nm)Torque and output graph147 kW at 5100-6600 rpm 280 Nm at 1800-4700 rpm Bosch Motronic MED 9.1 42° crank angle Super plus unleaded RON 98 (Super unleaded RON 95 with slight reduction in output) Two three-way catalytic converters with oxygen control EU 4Exhaust gas aftertreatment Exhaust emission standardEngine speed (rpm)S339_047Output (kW)10.5 : 129EnginesThe diesel enginesAll of the diesel engines fitted in the new Passat comply with the EU4 exhaust emission legislation. Optionally, vehicles with diesel engines can be equipped with a state-of-the-art particulate filter system. This new system combines the oxidising catalytic converter and the particulate filter in one component, the catalytically coated diesel particulate filter. Due to its underhood location, no fuel additive is required for soot combustion. In combination with a new engine oil, the diesel particulate filters are entirely maintenance-free.Catalytically coated diesel particulate filterS339_146Information on these diesel particulate filters can be found in self-study programme 336 "The catalytically coated diesel particulate filter".30The 1.9l/77 kW TDI engine with 2-valve technologyThis tried-and-tested 1.9l/77 kW TDI engine is also installed in the current Golf model and in other Volkswagen models. For installation into the Passat, it has been modified and adapted to the new vehicle. Special technical features● ●●●switchable exhaust gas recirculation cooler crankshaft sealing flange with integrated sender wheel for engine speed accelerator pedal module with contact-free accelerator pedal position senders contact-free clutch pedal switch.S339_048Technical dataEngine code Design type Displacement Bore Stroke Valves per cylinder Compression ratio Max. output Max. torque Engine management system Fuel Exhaust gas aftertreatment Exhaust emission standard BKC 4-cylinder in-line engine 1896 cm3 79.5 mm 95.5 mm 2 Torque (Nm)Torque and output graph77 kW at 4000 rpm 250 Nm at 1900 rpm Bosch EDC 16 Diesel, at least 51 CN or rapeseed methyl ester Exhaust gas recirculation and oxidising catalytic converter EU4Engine speed (rpm)S339_049Output (kW)19 : 131EnginesThe 2.0l/103 kW TDI engine with 2-valve technology and diesel particulate filterThe 2.0l/103 kW TDI engine has been developed from the 1.9l/96 kW engine. It was already installed in the Passat model year 2001. Special technical features In comparison with the 2.0l engine in the Passat 2001, this engine has the following special features:● ●●diesel particulate filter raised turbocharger rotated by 180°. Thanks to its current installation position, the turbocharger offers better response behaviour and success has been achieved in reducing the charging flow. balancer shaft module (see page 34)S339_052Technical dataEngine code Design type Displacement Bore Stroke Valves per cylinder Compression ratio Max. output Max. torque Engine management system Fuel Exhaust gas aftertreatment Exhaust emission standard BMP 4-cylinder in-line engine 1968 cm3 81 mm 95.5 mm 2 Torque (Nm)Torque and output graph103 kW at 4000 rpm 320 Nm at 1750 rpm to 2500 rpm Bosch EDC 16 Diesel, at least 51 CN Exhaust gas recirculation and diesel particulate filter EU4Engine speed (rpm)S339_05332Output (kW)18.5 : 1The 2.0l/103 kW TDI engine with 4-valve technologyBased on the 2.0l/103 kW 4V TDI engine fitted in the Golf 2004 and Touran, this engine has been further developed for the Passat 2006. Vibrations and noise emissions have been reduced by a balancer shaft module and new unit injectors with piezo-electric valves.Special technical features● ●unit injectors with piezo-electric valves balancer shaft module (see page 34)S339_050Technical dataEngine code Design type Displacement Bore Stroke Valves per cylinder Compression ratio Max. output Max. torque Engine management system Fuel Exhaust gas aftertreatment Exhaust emission standard BKP 4-cylinder in-line engine 1968 cm3 81 mm 95.5 mm 4 18 : 1 320 Nm at 1750 rpm to 2500 rpm Simos PPD 1 Diesel, at least 51 CN Exhaust gas recirculation and oxidising catalytic converter EU4 Torque (Nm) 103 kW at 4000 rpmTorque and output graphEngine speed (rpm)S339_051Output (kW)33EnginesThe unit injector with piezo-electric valveThe 2.0l/103 kW 4V TDI fitted in the Passat 2006 will be equipped with unit injectors with piezo-electric valves for the first time. This new development offers the following advantages over the unit injector with solenoid valve:● ● ● ●lower noise emissions wider range of injection pressures (130 - 2200 bar) more flexible pilot, primary and secondary injection design high efficiencyFurther information on the unit injector with piezo-electric valve can be found in self-study programme 352 "The unit injector with piezo-electric valve".The balancer shaft moduleCrankshaftSilent chainOil pump S339_116Balancer shaft moduleA balancer shaft module, which is located beneath the cylinder block in the oil pan, offers improved comfort. At high speeds, it prevents the occurrence of droning noises in the interior. The balancer shaft module contains two balancer shafts, which rotate in the opposite direction of the crankshaft and at twice the speed. The balancer shafts are driven by the crankshaft via a silent chain. The oil pump is secured to the balancer shaft module and is driven by one of the two balancer shafts.34The fuel tankThe fuel tank fitted in the Passat 2006 is comprised of two half shells manufactured from a compound of several plastic, adhesive and barrier layers. The two half shells are welded together after the fuel tank's internal breather system has been installed. The fuel tank meets the following extensive requirements:● ●● ● ●Storing the fuel Provision of the fuel in a defined condition, with reference to pressure and delivery volume, for the relevant mixture formation system (MPI, FSI and diesel) which is installed Measurement of the fuel level Compliance with environmental legislation in terms of emissions during operation and refuelling Dissipation of critical electrostatic charges and safety functions in the event of a crash, i.e. fire resistance and impermeability.The fuel tanks for vehicles fitted with front-wheel drive and 4MOTION differ. They are installed above the rear axle in both vehicle versions.Fuel tank structure for front-wheel drive vehiclesFuel filler pipeActivated charcoal canister in the rear right wheel housing Expansion tankFuel pumpHeat shieldAuxiliary heater metering pumpS339_10735EnginesThe fuel delivery unitThe fuel delivery unit is installed in the fuel tank. The following components are contained within this unit:● ● ● ● ●the fuel pump the fuel filter (not in the diesel engine) the fuel pressure regulator the suction jet pumps the potentiometer for the fuel gaugeFuel delivery unit for vehicles with petrol engines and front-wheel drive (MPI and FSI)Suction jet pump Fuel filterFuel pumpFuel intake pipeFuel pressure regulatorPotentiometer for fuel gaugeFloat for fuel gaugeSuction jet pump S339_10836The fuel delivery unit supplies the engine with the precisely required quantity of fuel at the precisely required pressure. It is controlled by the engine control unit according to the fuel requirements. The fuel delivery units differ due to the fuel required by the individual MPI, FSI and diesel engine systems.Fuel delivery unit for diesel enginesFuel pressure regulator Suction jet pumpFuel intake pipeSuction unitPotentiometer for fuel gauge Fuel pumpFloat for fuel gaugeS339_10937EnginesThe fuel delivery unit with integrated fuel pressure regulationFuel pump and fuel regulation initialisation depend on the engine which is installed.The MPI enginesThe engine's fuel supply is ensured by the constantdelivery fuel pump. The fuel is pumped, counter to the pressure regulator's pressure level, within the fuel delivery unit by the fuel pump. The engine takes the quantity of fuel which it requires and the surplus quantity flows back into the fuel tank from the pressure regulator.Fuel pumpS339_110The FSI enginesThe fuel pump provides the engine with the qualtity of fuel which it requires and regulates the fuel system pressure. The engine control unit initialises the fuel pump control unit J538 to regulate the fuel pump. The control unit is located on the fuel delivery unit's cover.S339_111 Fuel pump control unit J538The diesel enginesThanks to their mechanical fuel pump, diesel engines are naturally aspirated. The pre-supply pump is located in the fuel tank. This reduces flow resistance in the fuel lines and ensures improved re-starting behaviour when the fuel tank has been run dry.S339_112 Fuel pump38The suction jet pumpsSuction jet pumpTwo suction jet pumps are located within the fuel delivery unit. These have the task of continuously filling the fuel pump's reservoir chamber with fuel. This reduces the fuel pump's intake consumption, and the fuel pump always has sufficient fuel at its availability. Front-wheel drive vehicles have an additional fuel extraction point in the rear section of the fuel tank. This additional extraction point ensures that sufficient fuel is always available on long hill ascents. 4MOTION vehicles have an additional extraction point in the fuel tank's antechamber.To the additional fuel extraction pointS339_114Suction jet pumpThe fuel filterIn vehicles with petrol engines, this is located in the upper section of the fuel delivery unit. It is designed as a lifetime filter. In vehicles with diesel engines, the fuel delivery unit is not fitted with a fuel filter.Fuel filterS339_113The potentiometer for the fuel gaugeThe fuel level is determined by the fuel gauge float and is transmitted to the fuel gauge potentiometer. The determined value is displayed in the fuel gauge in the dash panel. If the sender is defective, the gauge shows that the fuel tank is empty.Float for fuel gauge Potentiometer for fuel gaugeS339_11939EnginesThe fuel tank for 4MOTION vehiclesThe external shape of the fuel tank is determined by the available installation space, which is in turn determined by the double wishbone rear suspension and the Haldex coupling. Its function is identical to the fuel tank fitted in front-wheel drive vehicles. An additional suction jet pump sucks the fuel out from the fuel tank's antechamber (left area in direction of travel).Fuel tank structure for 4MOTION vehiclesFuel filler pipe Expansion tankActivated charcoal canister in the rear right wheel housingFuel pumpAntechamber Auxiliary heater metering pump Main chamber S339_11540Power transmissionThe manual gearboxes - overviewGearboxes which are already in use within the Group are fitted as the mechanical, manual gearboxes. The gearboxes have merely been adapted for installation in the new Passat. As these gearboxes have already been described more exhaustively in other self-study programmes, they will only be shown in the form of an overview with a brief description here.Already fitted in the:CaddyTechnical featuresAlso see selfstudy programme No.: 328• Further development of the 02T gearbox • Shaft distance increased, final drive strengthened, housing adapted • Without speedometer sender5-speed manual gearbox 0AH Golf Caddy • Further development of the 02J gearbox • Shaft distance increased, final drive strengthened, housing adapted • Without speedometer sender 3285-speed manual gearbox 0A4 Touran • Further development of the 02U gearbox • Extended shafts, additional gear wheel pair, new housing cover • Without speedometer sender 3066-speed manual gearbox 0AJ Golf Touran • Further development of the 02J gearbox • Extended shafts with additional support, additional gear wheel pair, new, extended aluminium housing cover • Without speedometer sender 3066-speed manual gearbox 02S Golf Touran • Further development of the 02M gearbox • Selector shaft modifications, selector forks with stops in the housing, modified support • Without speedometer sender 3066-speed manual gearbox 02Q41Power transmissionThe 6-speed automatic gearboxes 09G and 09MThe 6-speed automatic gearboxes set new standards in terms of dynamics and economy in the segment of transversely mounted stepped automatic gearboxes. They are particularly characterised by● ● ● ●The automatic gearbox with the code 09G has already proved its worth in the Golf 2004, Touran and New Beetle. In design and functional terms, automatic gearbox 09M corresponds to automatic gearbox 09G. It has merely been reinforced to cope with higher torque transmission in the area of the couplings and brakes and in the planetary gear sets. Torque transmission 09G = 250 Nm 09M = 450 NmLow weight, High shifting comfort, Compact gearbox dimensions and High ratio between first and top gear.S339_056The design and function of the selector lever correspond to those in the Golf 2004. The ignition key withdrawal lock is new.Further information on these automatic gearboxes can be found in self-study programme No. 30942The 6-speed Direct-Shift Gearbox 02EFollowing its successful, initial launch in the Golf 2004 and Touran, the Direct-Shift Gearbox is now also being fitted in the Passat. The Direct-Shift Gearbox combines the advantages of a manual gearbox:●The gearbox offers the following characteristics:● ● ● ● ●●High efficiency, i.e. low fuelconsumption on a par with a manual gearbox and spontaneous frictional connection with very short shift times● ●●Six forward gears and one reverse gear Standard and sports gearbox programmes Tiptronic selector level and steering wheel switches Mechatronics Hill-holder function Creep control Pressure oil filter and oil cooler located on the gearbox Maximum torque 350 Nm.with the advantages of an automatic gearbox:●High comfort (no manual clutch actuation or shifting)S339_057Thanks to its design, it meets both the requirements of active, sporty drivers and also the high comfort requirements of rather more relaxed, forward-looking drivers who prefer automatic gearboxes.The design and function of the selector lever correspond to those in the Golf 2004. The ignition key withdrawal lock is new.Further information on the Direct-Shift Gearbox can be found in self-study programme No. 308.43Power transmissionThe ignition key withdrawal lockThe ignition key withdrawal lock is fitted in vehicles with automatic gearboxes. It prevents the ignition key from being removed if the selector lever is not set to the "P" position. If the selector lever is set to a driving position or the "N" position, the vehicle is not secured against rolling away. The ignition key withdrawal lock is comprised of the following components.● ●●The selector lever locked in position "P" switch F319 The steering column electronics control unit J527 and The ignition key withdrawal lock solenoid N376 in the entry and start authorisation switch E415Entry and start authorisation switch E415S339_099S339_100Steering column electronics control unit J527Selector lever locked in position "P" switch F319S339_10144How it works:Ignition switched on, selector lever in driving position or "N"Selector leverDriving position or "N"S339_102 ResistorIf the selector lever is set to a driving position or "N" position, switch F319 is closed. Due to the fact that switch F319 is closed, the current circuit to control unit J527 is made. Based on the made current circuit, control unit J527 detects the selector lever position.It supplies solenoid N376 with current and thereby activates the ignition key withdrawal lock. The ignition key cannot be removed. A resistor limits the voltage to control unit J527.Ignition switched on, selector lever in "P"Parking position "P" Selector leverS339_103If the selector lever is set to "P", switch F319 is open. Opening switch F319 interrupts the current circuit to control unit J527. Based on the broken current circuit, the control unit detects that the selector lever is in position "P", and the ignition key can be removed.Effects in the event of signal failure If the signal from switch F319 fails or solenoid N376 cannot be initialised, the ignition key can be removed although the selector lever is not in position "P". The flashing gear indicator notifies the driver that the selector lever is not in position "P" and that the vehicle is not secured against rolling away.45Running gearThe running gearThe running gear fitted in the Passat 2006 will be the benchmark in the mid-size class vehicle segment. This is achieved by consistent further development of the tried-and-tested axle components in VW's modular running gear system. Modern, lightweight McPherson strut front suspensionand the state-of-the-art 4-link rear suspension therefore remain in use. The Passat's handling behaviour, which is outstanding as a result of these components, is rounded off with the electromechanical power steering system familiar from the Golf 2004.●Safety steering column with electric steering column lock●TRW ABS/ESP with vehicle/ trailer stabilisation●Electromechanical power steering●Lightweight strut front suspension●Dynamic starting-off assist●Self-supporting tyres, optional46However, there are also significant innovations in the Passat's running gear, e.g.●●●The electromechanical parking brake with AUTO HOLD function, The new ABS/ESP system from TRW (Thompson-Ramo-Wooldrigde) and The tyre pressure monitor system from Hella.●Four-link rear suspensionS339_058●Electromechanical parking brake●AUTO HOLD function, optional●Tyre pressure monitor, optional●Tyre pressure monitor system, optional More detailed information on the tyre pressure monitor systems and the electromechanical parking brake can be found in SSP 347 "Tyre pressure monitor systems" and in SSP 346 "The electromechanical parking brake".47Running gearThe front axleThe front axle is the familiar spring strut suspension with lower wishbones. The aluminium subframe is designed in one piece and is joined to the body with 4 bolts.S339_123The rear axleThe front-wheel drive Passat's rear axle is a compact four-link rear suspension in lightweight design.S339_059The 4MOTION rear axleThe 4MOTION rear axle is based on that fitted in the front-wheel drive vehicles and is linked to the body via large bonded rubber bushes.48The steeringThe Passat 2006 is fitted with electromechanical power steering. This is familiar from the Golf 2004. Due to the high front axle loads in the Passat 2006, the characteristic power steering curves have been adapted in the control unit.Electric motorControl unit S339_060The steering columnThe steering column fitted in the Passat 2006 can be adjusted vertically by 60 mm and horizontally by 50 mm. It is equipped with an electric steering column lock. This has enabled the steering lock to be positioned in a crashoptimised area. The position of the steering column adjustment clamping lever has also been crash-optimised and therefore lies outside of the possible knee impact area. This has been achieved by reversing the clamping lever's rotational direction.Crash mechanism (slide and tear tab)Adjustment directionsCrash element Clamping lever for steering column adjustmentLower steering shaft, telescopicSteering shaftSingle universal jointSingle universal joint with angle to the steering boxS339_12449Running gearThe brake systemThe performance and weights of new vehicles are constantly on the increase. This is due to the continuous rise in safety and convenience equipment. The vehicle's brake system therefore has to be adapted to these conditions. Consequently, a new brake system has also been developed for the Passat 2006. This encompasses:●● ● ●● ●A new ESP system from TRW (Thompson-RamoWooldrigde) with vehicle/trailer stabilisation Large wheel brakes A brake disc wiper A tandem brake master cylinder with brake light switch A brake servo with "dual rate characteristics" A hydraulic brake servo (HBV), for vehicles with 16.l/85 kW and 2.0l/110 kW FSI engines only in combination with automatic gearboxesS339_061A new brake fluid will be introduced along with the Passat 2006. Please observe the notes in the workshop manual.50The anti-lock brake system ABS/ESP TRW EBC 440A TRW ESP system will be fitted for the first time at Volkswagen. In addition to a hydraulic brake assist system, this system includes an AUTO HOLD function as an interface to the electromechanical parking brake, plus a vehicle/trailer stabilisation system and a brake disc wiper. The ESP system is fitted as standard in the Passat 2006.S339_125 Hydraulic unit Control unitHydraulic unit with brake pressure sender To facilitate comprehension, the hydraulic unit and the control unit are shown separately (folded open).Hydraulic unitControl unitS339_126Contact for hydraulic pump motor power supply Brake pressure sender 1 G201 Spring contact for brake pressure sender 1 G20151Running gearThe brake disc wiperA film of water may form on the brake disc in severe rain or if the road is wet, for example; this reduces the coefficient of friction between the brake disc and the brake pads on braking. As a result, the braking effect is temporarily changed until the water film is dissipated by frictional heat. This is combated by the new function in the ESP system – the brake disc wiper. By regularly applying the brake pads to the brake discs from time to time at low pressure, this displaces the water film and shortens the stopping distance. This is carried out by cyclical initialisation of the hydraulic pump, which builds up the low brake pressure in the brake system. This process in the brake system is not perceptible to the driver.Brake pressure15 wheel revolutions 2 bar 5 min15 wheel revolutionsStart of executionEnd of executionTime/distanceS339_145The vehicle/trailer stabilisation systemA vehicle/trailer stabilisation system will be launched in the Passat 2006 along with the TRW EBC 440 ESP system. This function is an ESP sub-system. An unstable vehicle/trailer is stabilised by specifically braking the wheels. The towing vehicle's yaw rate and steering angle are used as input variables to achieve this. The trailer's pendulum movements are passed on to the towing vehicle. This leads to yawing moments and lateral forces which are detected by the yaw rate sender and the steering angle sender and are processed in the ESP control unit. The vehicle/trailer's instability is combated by building up pressure in the system and actuating individual valves in the ESP hydraulic unit.52The brake servo - dual rate boosterAll left-hand drive vehicles will be fitted with an 11" brake servo. The right-hand drive vehicles will be fitted with a 7/8" tandem brake servo. Implementation of the "dual rate characteristics" represents a significant innovation.S339_144A progressive characteristic curve is achieved thanks to the brake servo's modified internal design. Even at low pedal forces, this offers higher brake pressures than conventional brake servos. Deceleration nevertheless commences gently when actuated in the normal manner.Standard characteristic curve Dual rate characteristic curveBrake pressurePedal forceS339_14253Running gearThe brake light switch FThe brake light switch F is bolted to the brake master cylinder. It is used to detect whether the brake pedal is actuated. When the brake pedal is actuated, the brake lights are switched on.Brake master cylinderSignal usage The brake lights are switched on via the vehicle electrical system control unit. In addition, the engine control unit prevents the vehicle from accelerating when the brake and accelerator are actuated at the same time. To do this, the quantity of fuel injected is reduced or the ignition timing and throttle valve are adapted.Brake light switch F S339_130 Brake servoPush rodPiston Push rod piston Magnetic ringBrake light switch F Hall sender Brake master cylinderEvaluation electronicsS339_13554How it works: On actuation of the brake pedal, the push rod in the brake master cylinder pushes the piston with magnetic ring (permanent magnet).Brake pedal not actuated: When the brake pedal is not actuated, the piston and magnetic ring are at rest. The evaluation electronics of brake light switch F transmit a signal voltage of 0 - 2V to the engine control unit and the vehicle electrical system control unit. This is used to detect that the brake pedal is not actuated.Signal voltage to the engine control unit S339_136Brake pedal actuated: When the brake pedal is actuated, the piston is moved over the hall sender. When the piston's magnetic ring passes the hall sender's switching point, the evaluation electronics transmit a signal voltage, which is up to 2V lower than the vehicle electrical system voltage, to the engine control unit. This is used to detect that the brake pedal is actuated.Signal voltage to the engine control unitS339_13755Running gearThe brakesEngine Front brake in mm Rear brake in mmØ 312 x 25Ø 286 x 1275 kW to 118 kWS339_140S339_138Bolted swivel bearingØ 345 x 30Ø 310 x 22as of 132 kWS339_141S339_139Bolted swivel bearing56The automatic levelling systemThe Sachs automatic levelling system is a self-inflating shock absorber which will be installed on the Passat's rear suspension instead of the conventional shock absorber. It will be available as an optional extra at a later point in time. The automatic levelling system does not require any separate components, as it makes use of relative movements between the rear axle and the body to maintain a specific vehicle level. Thanks to the automatic levelling system, full spring travel is always available for all load conditions. This guarantees optimal ride comfort and vehicle safety. Axle and tyre wear is additionally reduced.S339_15357Running gearThe wheels and tyresSummer tyres Wheel 205/55 R16 91 H/V Steel Alloy Alloy 6.5J x 16 ET 42 mm215/55 R16 93 H/V7J x 16 ET 45 mm235/45 R17 74 VAlloy7.5J x 17 ET 47 mmWinter tyres (suitable for snow chains) 205/55 R16 91 H/V Steel Alloy 6.5J x 16 H2 ET 42 mmSpare wheelMobility set comprised of a sealant spray bottle and compressor ortemporary spare wheel T125/70 R18 on 3.5J x 18 ora full-size spare wheel if a variable luggage compartment floor is fittedMore detailed information on the tyre pressure monitor systems can be found in self-study programme No. 347 "Tyre pressure monitor systems".58The self-supporting tyreSelf-supporting tyres will be introduced in the Passat 2006. These Bridgestone RFT tyres (Run Flat Tyre) remain stable even in the event of full pressure loss. At a maximum speed of 80 km/h, the vehicle is still able to cover a distance of up to 250 kilometres (depending on the load and the vehicle). This is made possible by a special side wall reinforcement and innovative, extremely heatresistant rubber compounds. A reinforced bead coil ensures that the tyre is securely seated on the wheel – even in the event of total pressure loss. One additional advantage is: Bridgestone RFT tyres do not require special wheels and can simply be mounted on standard wheels.Tyre structure Belt/strip protector layer Tread mixture Steel insertsRayon carcass layerRFT codeSide reinforcementS339_131 Wire coil/bead coil Bead taper/bead apexTyre comparisonStandard tyreSelf-supporting tyre Self-supporting tyre construction Full inflation pressureStandard tyre construction Full inflation pressureDeflatedReinforced side wall DeflatedS339_13259Electrical systemThe fuse boxes and relay positions in the vehicle electrical systemThe installation locationsThe vehicle electrical system in the Passat 2006 has a decentralised structure and is therefore comparable to that in the Golf 2004. Due to the multitude of electrical consumers, the Passat has an additional fuse box on the right-hand side of the dash panel. Distribution of the fuse boxes and relay positions to different locations enables rapid and precise fault diagnosis.Fuse box, right of dash panelFuse and relay box, left of engine compartmentStrip fuses in the fuse and relay box60Relay holder on the vehicle electrical system control unitS339_062Relay holder on the vehicle electrical system control unitFor more detailed information on the electrical system, please refer to selfstudy programme 340 "The Passat 2006 electrical system".Fuse box, left of dash panel61Electrical systemThe networking conceptTo ensure flawless data exchange between the individual control units, these are networked via various data bus systems. The data bus diagnostic interface J533 (gateway) acts as the interface for the following data buses:● ● ● ● ●CAN powertrain data bus CAN comfort data bus CAN infotainment data bus CAN instrument cluster data bus CAN diagnostic data busCAN powertrain data bus CAN comfort data bus CAN infotainment data bus LIN data bus CAN sensor data bus CAN instrument cluster data bus CAN diagnostic data bus CAN data busline K line LIN data busline Serial data line In addition to the CAN data bus, certain electrical components are networked via the LIN data bus.62Legend D E221 G85 G273 G384 G397 G419 H8 J104 J136 J217 J220 J234 J255 J285 J345 J364 J386 J387 J388 J389 J393 J400 J412 J428 J431 J446 J492 J500 J503S339_063J519 J521 J525 J527 J533 J540 J587 J604 J605 J738 J764 J788 NOx R T16Ignition/starter switch Operating unit in steering wheel Steering angle sender Interior monitoring sensor Vehicle inclination sender Rain and light detector sensor ESP sensor unit Anti-theft alarm system horn Control unit for ABS Seat and steering column adjustment control unit with memory function Automic gearbox control unit Motronic control unit Airbag control unit Climatronic control unit Control unit with display in dash panel insert Trailer detector control unit Auxiliary heater control unit Driver door control unit Front passenger door control unit Rear left door control unit Rear right door control unit Convenience system central control unit Wiper motor control unit Mobile telephone operating electronics control unit Adaptive cruise control unit Headlight range control, control unit Parking aid control unit Four-wheel drive control unit Power steering control unit Control unit with display for radio and navigation Onboard supply control unit Front passenger seat adjustment with memory control unit Digital sound package control unit Steering column electronics control unit Data bus diagnostic interface Electromechanical parking brake control unit Selector lever sensor control unit Auxiliary air heater control unit Rear lid control unit Telephone controls control unit Electronic steering column lock control unit Isolation relay for CAN powertrain bus NOx sensor Radio 16-pin connector (diagnostic connection)63Electrical systemThe inverterAn optional 230 V/50 Hz European socket can be ordered for the Passat 2006. An inverter, which is firmly connected to the socket, is installed in the vehicle to generate the alternating voltage. This unit is located in the rear centre console instead of the cup holder.S339_064The 230 V socket is designed without an earthing contact and can be operated at a maximum, continuous output of 150 W. As the temporary (2 min) peakoutput, approx. 300 W can be drawn off.Child safety lock microswitchVoltage can only be drawn from the socket when the engine is running (terminal 61). Besides the engine speed signal line, a voltage supply (terminal 30) and a ground connection (terminal 31) link the inverter to the vehicle electrical system.. Galvanic separation from the alternating voltage level has been implemented.U13 – inverter with socket, 12V - 230VStatus LED above socket*S339_065 230V socket*Red flashing Green= =malfunction ready to operateNo repairs may be carried out on 230V systems. If the socket or the inverter is defective, the entire assembly must therefore be exchanged.64Entry and start authorisation switch E415The entry and start authorisation switch is part of the drive authorisation system. The ignition key is designed without a key bit, as the vehicle is started by pushing the key rather than turningit. The emergency key serves●● ● ● ●to mechanically unlock the driver's door if the vehicle cannot be opened using the radioremote control, to deactivate the front passenger airbag, to lock the glove box, to lock and release the rear seat bench and to activate the child safety lock in the rear doors.Entry and start authorisation switch E415S339_066Ignition keyS339_067 Emergency keyLock for locking and releasing the inserted emergency key65Heater and air conditionerClimate controlThanks to the new powertrain concept with a transversely mounted engine, the heater/ air conditioner concept already implemented in the Golf 2004, Touran and Caddy 2004 can be employed. Two different systems are available in the Passat 2006:●An identically designed air conditioner unit, which has been adapted to the relevant vehicle equipment, is used for both systems. The main difference is in air distribution flap actuation. 2C-Climatronic is fitted with an additional fresh air/air flow flap.●The semi-automatic heater and air conditioner "Climatic" The heater and air conditioner 2C-"Climatronic".Indirect ventilationS339_073Air ducting rear left footwell vent Air ducting rear centre vent Air ducting rear right footwell vent66OperationDifferent control panel versions are available depending on the equipment fitted in the vehicle:● ● ●with or without instant heat button for the auxiliarycoolant heater with or without potentiometer for the seat heating with or without potentiometer for the heated windscreenThe Climatic systemIn the Climatic system, the vehicle's entire interior is comprised to form a single climatic zone. The desired temperature is set at the left rotary switch. The rotary switch is linked to a potentiometer, which passes the temperature command on to the Climatic control unit. The control unit then forwards a calculated flap position value to the temperature flap positioning motor. Climatic is able to control the pre-set temperature by monitoring the vent and interior temperature. The air distribution flaps are actuated via a flexible shaft in the Climatic system. The air conditioner is switched on and off via the ECON button. In ECON mode, the additional heater is also switched off in vehicles fitted with diesel engines. The Climatic air conditioner unit is equipped with a combined fresh air/recirculated air flap.S339_075Climatic control panelECON button Left seat heatingInterior temperature sensor Right seat heatingS339_074 Feedback LED Electronic rotary temperature switch Instant heat button auxiliary coolant heater67Heater and air conditionerThe 2C-Climatronic systemIn the 2C-Climatronic system, the interior is subdivided into two climatic zones. This means that the temperatures desired on the driver and front passenger side can be set independently of each other in the range from 16 °C to 29.5 °C. The climatic zones are separated by two temperature flaps inside the air conditioner unit. All air distribution and temperature control flaps are actuated via positioning motors with an integrated feedback potentiometer. Maintenance of the preset interior temperature and optimal air distribution are thereby controlled and monitored by the Climatronic control unit. The 2C-Climatronic system can be operated in automatic or manual mode. In addition to the Climatic system, 2C-Climatronic is fitted with a fresh air flow flap, which is closed as of 100 km/h as speed increases, in order to keep the volume of fresh air which is supplied constant. One further function which is available is speeddependent blower reduction, which reduces the air conditioner's flow noises at low speed. In cooling mode, this is compensated by lowering the vent temperature and by raising the ventilation temperature in heating mode. To prevent the windscreen from misting when the compressor is switched off and the windscreen wipers are switched on, the defrost flap is automatically opened further to conduct more air to the windscreen.S339_077Climatronic control panelS339_076 Interior temperature sensor Heated windscreen68Indirect ventilation2C-Climatronic is equipped with indirect ventilation. An adapter positioned on the top of the air conditioner unit enables air distribution between the vents in the centre of the dash panel and indirect ventilation via the electrically driven air flap for indirect ventilation. This flap is actuated by the indirect ventilation flap control motor V213, which is initialised by the Climatronic control unit. The potentiometer for the indirect ventilation flap control motor G330 is integrated into the control motor. This records the flap position.●Manual actuationIndirect ventilationS339_104 Vents, centre of the dash panel●After reaching the desired temperature in Climatronic automatic mode, the air flap in the indirect ventilation adapter is automatically switched from the air duct for the vents in the centre of the dash panel to the indirect ventilation air duct. In manual mode, indirect ventilation can be initialised by pressing the "arrow up" button on the air conditioner control panel.Indirect ventilation adapter To indirect ventilation To the left dash panel ventTo the right dash panel ventS339_122To the vents in the centre of the dash panel Indirect ventilation flap control motor V213 Vent on top of dash panel Air flap for indirect ventilation Air flapVents in centre of dash panelThe flow pattern The air coming from the air conditioner unit is forwarded in the indirect ventilation adapter depending on the position of the air flap:●Adapter for indirect ventilation●to the vents in the centre of the dash panel for direct ventilation and to the vents on the top of the dash panel for indirect ventilationFrom the air conditioner unitS339_07969Heater and air conditionerThe Thermo Top V auxiliary heaterThe new Passat can be fitted with the optional Thermo Top V auxiliary coolant heater. The auxiliary heater is installed in the front right wing below the headlight. This undertakes the following tasks:● ● ●Acts as an auxiliary heater for heating the vehicle interior and defrosting the vehicle's windows Acts as stationary ventilation to lower the interior temperature when the vehicle is parked in the sun Acts as an additional heater in vehicles with petrol or diesel engines (fitted as standard in diesel engines)S339_106Thermo Top V auxiliary coolant heaterRadio remote control for auxiliary coolant heaterFor basic information on auxiliary coolant heaters, please refer to self-study programme 280 "The Phaeton – auxiliary coolant heater and additional heater Thermo TOP C".70Structure●●●The auxiliary coolant heater control unit is integrated into the heater unit. The electrical contacts for the combustion air blower are inserted directly into the control unit. The auxiliary coolant heater is fitted with a second NTC temperature sensor for controlling and monitoring the water temperature. The combustion air enters the combustion chamber via a venturi nozzle and thereby draws in the fuel delivered by the metering pump from the fuel line.Water outletCombustion air blowerVenturi nozzle Temperature sensorControl unitS339_033Heat exchanger Electrical connectionFuel inlet Combustion air inlet Exhaust gas outletThe venturi nozzleThe intaken air is guided through a ceramic housing, which is shaped as a venturi nozzle. As a result of this, the air delivered by the combustion air blower is accelerated to approx. 50 m/s. The incoming fuel is therefore drawn from the fuel line and swirled. For information on fuel pre-heating and Thermo Top V activation, refer to selfstudy programme 318 "The Golf 2004".71Radio and navigationThe radio systems in the Passat 2006Radio RCD 300Radio RCD 300 is available as the standard radio system for private customers. It offers the following functions:● ● ●● ●● ● ● ● ● ● ●Two or four loudspeaker channels (20 Watts each) RDS FM/AM European radio (AM without LW) Indication of the stored stations with RDS names in the display FM 2-tuner diversity Control via the multi-function steering wheel (MFL) and multi-function indicator (MFI) Integrated single-CD player Control system for external 6-fold CD-changer Telephone control system (hands-free) GALA Self-diagnosis with loudspeaker diagnosis Transport mode Driving school function (indication of turn signal function and speed via the display)S339_070Radio RCD 500Radio RCD 500 in the Passat 2006 offers the following functions:● ● ●● ● ● ● ● ● ● ● ● ● ●Four loudspeaker channels (20 Watts each) RDS FM/AM European radio (AM without LW) Indication of the stored stations with RDS names in the display FM 2-tuner phase diversity Control via the MFL and MFI Integrated single-CD player Control system for external 6-fold CD-changer Telephone control system (hands-free) GALA Traffic Information Memory (TIM) Vehicle model-specific sound adaptation Self-diagnosis with loudspeaker diagnosis Transport mode Optional connection of an external sound amplifierS339_07172Radio/navigation system MFD 2A radio system with an integrated navigation system is also available for the Passat 2006. The operating sequences are similar to those of the radio/navigation system fitted in the Touareg. It offers the following functions, etc.:● ● ● ● ●● ● ● ● ● ● ●Multi-colour display (MFD) Dynamic guidance Four loudspeaker channels (20 Watts each) RDS FM/AM European radio (AM without LW) Indication of the stored stations with RDS names in the display External diversity changeover box Control via the MFL and MFI Control system for external 6-fold CD-changer Telephone control system (hands-free) GALA TIM Self-diagnosis with loudspeaker diagnosisS339_072The cover frame has to be removed to remove or install a radio, in order to access the threaded connection located behind it.For further information on radios, please refer to self-study programme 342 "Radio systems".73Notes7475339© VOLKSWAGEN AG, Wolfsburg All rights and technical changes reserved. 000.2811.54.20 Technical status 03.2005 Volkswagen AG Service Training VK-21 Brieffach 1995 D-38436 Wolfsburg❀ This paper has been manufactured from cellulose bleached without the use of chlorine.