TECHNICAL DOCUMENTATION

SSP 355 The EOS 2006

PDFEN62 pages5 MB
SSP 355 The EOS 2006 - PDF cover

This PDF is currently unavailable.

Read document text
Service TrainingSelf-study Programme 355The EOS 2006 The Volkswagen Eos combines the characteristic flair of a cabriolet with the emotional design of a coupé. It is thus aimed at two different groups of buyers and builds on the tradition of cabriolet production at Volkswagen. This very successful tradition started in 1949 with the first Beetle Cabriolet and continued in 1979 with the Golf Cabriolet and in 2003 with the New Beetle Cabriolet.Unlike its predecessors, the Eos is not derived from another model, it is an independent development that unites the characteristics of different vehicle types and heads in a totally new direction in terms of roof technology. Together with the values of quality, comfort, safety and engines, the Eos has a rounded, promising vehicle concept that sets new standards among its rivals.Make sure you read self-study programme SSP 379 “EOS 2006 – Electrical System”. You will need to read both programmes to gain an insight into the complex roof system and its operation.S355_007NEWImportant NoteThe self-study programme shows the design and function of new developments. The contents will not be updated.For current testing, adjustment and repair instructions, refer to the relevant service literature.2 ContentsIn Brief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Body. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Occupant Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Engines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Heating and Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Convenience Electrics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Radio and Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 593 In BriefThe Volkswagen Eos Cabriolet-CoupéThe Eos is named after the Greek goddess of the dawn, who was the daughter of the Titans Hyperion and Theia. According to legend, the Titans, the oldest race of Greek deities, are the children of the first gods Gaia and Uranus, who originate from chaos. Eos is the sister of the sun god Helios and the moon goddess Selene. Eos rises out of the Oceanus every morning and travels ahead of Helios in his chariot as he rides across the sky to herald the new day. Homer praises her beauty and her grace and describes her as a wonderful, beautiful and curly-haired goddess. The Eos from Volkswagen combines the everyday and all-year round suitability of a coupé with the classic opentop driving characteristics of cabriolets without their disadvantages like, for example, high noise level. The Eos is built at the Auto Europa plant in Palmela, Portugal.Eos — The CoupéS355_0174 Being an independently developed cabriolet-coupé, the Eos has the following characteristics:-Sporty design and handling Electrohydraulically operated, five-piece folding steel roof with integrated glass sliding sunroof Four full-sized seats High-level of interior comfort thanks to 12-way electrically adjusted seat with electrical easy-entry function Rear seat system with through-load option Generous boot volume when roof closed Extensive safety concept with driver, front passenger and head airbags and active rollover protection system High torsional stiffness Low level of wind noise High-end sound system from Dynaudio ParkPilot with boot lid assist and a wide range of engines.Eos — The CabrioletS355_0095 In BriefTechnical dataExterior dimensions and weightsS355_002 2578 44071443S355_001 1545 1791 1553S355_003Exterior dimensionsLength Width High with roof closed Wheelbase Track width at front Track width at rear 4407mm 1791mm 1443mm 2578mm 1545mm 1553mmWeightsMaximum weight Curb weight Cd value as coupé 2090kg* 1713kg* 0.315* when equipped with 3.2l 185kW V6 engine6 Interior dimensionsS355_006S355_004S355_005Interior dimensionsInterior length Front shoulder width Front headroom Rear shoulder width Rear headroom 1684mm 1390mm 952mm 1055mm 909mmOther dimensions and dataCoupé boot volume Cabriolet boot volume Tank capacity 380l / 358l* 205l / 183l* 55l* when equipped with 3.2l 185kW V6 engine7 BodyBody structureS355_010A body with a high static and dynamic rigidity is the requirement for good vibration behaviour and excellent driving properties. This is achieved by using high, higher and higheststrength sheet qualities as well as THERMOFORMED SHEETS in conjunction with modern joining methods like laser welding and structural adhesive joints. The use of thermoformed sheets, in particular, has increased the stability of the body without making it heavier. The following components are made from higheststrength sheets: Inner A-pillar Seat consoles Sills Rear longitudinal membersLegend Normal sheets with a strength up to 140N/mm2 Strong sheets with a strength from 180 to 240N/mm2 High-strength sheets with a strength from 260 to 300N/mm2 Highest-strength sheets with a strength from 300 to 420N/mm2 Thermoformed sheets with a strength of over 1000N/mm2 PlasticHighest-strength tubes are fitted in the upper area of the doors and under the rear seat bench. Thermoformed sheets are used: - in the front bumper cross-members - in the A-pillar reinforcements and in the front windscreen frame - in the door reinforcements8 Special body-in-white measuresCross member top edge of door High sillsFront subframeUnderbody capsule Front module Diagonal struts S355_011To also guarantee the excellent vibration behaviour of the cabriolet-coupé when the roof is open, extensive reinforcements were made to the body-in-white in addition to the use of the described sheet qualities. In addition to the higher sills, the cross members on the upper edges of the doors and the reinforcement of the rear panel, they are mainly in the introduction of a supporting front underbody capsule made from aluminium and diagonal struts mounted in the rear area.The underbody capsule and diagonal struts are bolted. The underbody capsule connects the front subframe to the longitudinal members. Together with the diagonal struts, this creates an additional reinforcing level and thus increases the torsional rigidity of the whole body.9 BodyPedestrian protectionIn the body development, greater focus has been placed on pedestrian protection in addition to occupant protection. The aim is to reduce the risk of injury to pedestrians and cyclists by means of constructive measures. The Eos has a complete concept for the front end that comprises the following measures: - Sufficient spacing from hard engine compartment parts under the bonnet - Optimisation of hinges and interior sheets on the bonnet - Lower risk of leg injuries Reduction of leg injuries The Eos has an additional cross member for pedestrian protection that has a deformation element made from foam. The deformation element absorbs a large proportion of the energy in a collision so that the risk of severe leg injuries is reduced.S355_016Deformation elementFront-end framePedestrian protection cross memberCrash safetyIn terms of car crash safety, we distinguish between three different load levels that have to absorb the forces in an accident. The upper load level is formed by the roof, the middle load level is the side structure of the vehicle and the lower load level is the vehicle floor structure. On cabriolets, the forces caused by a collision mainly need to be absorbed by the centre and lower load level because the roof construction is, to a great extent, not part of the vehicle statics.Centre load level Upper load levelLower load levelS355_04810 Absorption of force in side collisionThe aim of all crash safety measures is to preserve the crash survival space inside the vehicle and provide maximum protection for the occupants in accidents. This is achieved by transferring the forces arising in the collision specifically to the vehicle structure. In this way, the degree of deformation at the point of impact is reduced as the forces affect a larger area.S355_012Impact force Absorption of force in frontal collisionS355_013 Impact forceOn the Eos, in frontal and side collisions, the forces are distributed broadly across the centre and lower load levels thanks to the reinforcing and stiffening measures on the side and floor structure so that maximum protection for occupants is guaranteed even when the roof is open.S355_01411 BodyInteriorFront seatsThree different front seat versions are available for the Eos. The standard equipment comprises a mechanical 8-way seat with a manual 2-way lumbar support. The next equipment version up is the mechanical 8-way seat with electrical 2-way lumbar support and manual easy-entry function. The top of the range version is the electrical 12-way seat with electrical 4-way lumbar support and electrical easy-entry function. On this front seat, you can also adjust the seat tilt electrically.S355_16212 Rear seat benchS355_021The rear seat bench in the Eos is produced in a new manufacturing process. The wire frame is foamed into the upholstery. The cover is glued to the upholstery. This method is called “IN SITU” manufacturing. The rear seat bench has two pairs of Isofix anchors and three-point seat belts with belt force limiters as standard.S355_036A lockable through-load facility, which is also standard, allows you to transport skis, for example. Brackets for securing a first-aid kit are integrated in the lid of the through-load facility. Once the lid has been removed, you can reach the emergency boot release.13 BodyWind deflectorS355_018A wind deflector is available as an optional extra for the Eos. It folds into a small package with carrying handle allowing it to be stored away in the boot. Once unfolded, the wind deflector fits into the mountings provided. It covers the rear seat bench completely up to the head restraints. Finally, the partition section folds up towards the front seats and locks into place. The wind deflector reduces the formation of turbulence. It also helps keep the rear seat bench clean.Unfolding wind deflectorS355_019Airflow with wind deflectorS355_03714 BootWhen you drive the Eos as a coupé, a generous boot with a volume of 380 litres is available. If you want to drive with the roof open, the luggage cover needs to be closed beforehand to protect the cargo and, most importantly, the cabriolet roof from damage. The boot still has a volume of 205 litres when the roof is open and the luggage cover is closed. The roof can only be opened when the luggage cover is locked in place. A microswitch checks if the cover is positioned correctly. If the luggage cover is not closed, a warning signal will sound and warning message will appear in the dash panel insert display to inform the driver about the problem. Stickers on the left-hand and right-hand side of the boot and on the luggage cover inform you that nothing may be stowed there as the roof side members and roof mechanism use this space when the roof package is lowered.Boot space in coupéS355_022S355_045 Luggage compartment coverWarning stickers on sides of bootS355_103Warning sticker on luggage compartment coverS355_10415 BodyCSC roofS355_038S355_008CSC stands for Coupé Sunroof and Cabriolet roof. It is a multi-part folding roof made from steel sheet and represents a completely new development with its complicated electrohydraulic operation. Since the roof has five parts, the A-pillar with the wind-protection frame could be made shorter than on other cabriolets. The windscreen therefore does not extend too far over the interior meaning the driver and front passenger are more in the open and climbing in and out is easier. An electrical glass sunroof integrated in the CSC roof with sliding headliner also provides ventilation and light when you are driving the car as a coupé.The CSC roof and the externally running sunroof are operated using a switch in the centre console. When the roof is operated, the CSC roof segments are placed one on top of each other in a sandwich and are stored in the boot. To support the driver when the roof is retracted, the Eos Park Assist system is supplemented with the function of a boot lid assist. It monitors the area behind the Eos and ensures that the boot lid can move in its full range when the roof is opened. The Park Assist is available as an optional extra.You will find detailed information on the Eos onboard supply and electrics in self-study programme SSP 379 “EOS 2006 – Electrical System”.16 Roof mechanismCSC roof designM-segment Roof side member Sunroof module Mounting frame C-segmentBoot lidBoot lid lockBoot lid hinge Main drive S355_165The CSC roof is made up of five main modules or segments: - The glass sunroof or ESS module for short (ESS stands for external sliding sunroof), - the M-segment with the centre part of the roof frame and the electrical drive for the ESS module functions, - the C-segment with the rear windscreen and - the left-hand and right-hand main drive with the respective roof side members, the accompanying locks and two hydraulic cylinders for each. Together with the roof movement, the boot lid is opened and closed to store the roof in the boot. The movement of the boot lid with the necessary locking and unlocking processes is also carried out by hydraulic cylinders.The boot lid mechanism is basically made up of the following components: the boot lid the boot lid hinges the mounting frame 2 hydraulic cylinders on each side of the car the boot lid lock.All in all, the complete movement procedure to open and close the CSC roof is a complex interaction of individual movements in which the completion of one part of a step is often the requirement for the next step to be carried out. The system is supported by an extensive set of sensors that monitor the movement and the position of the CSC roof.17 BodyCSC roof driveHydraulic cylinder in boot lid mounting frame (4)Hydraulic cylinder in roof side member (2)Hydraulic cylinder in main hinge (1)Hydraulic cylinder in boot lid hinge (3)S355_166All roof movements together with the unlocking or locking of the different components are made by the four hydraulic cylinders for the CSC roof as well as the four hydraulic cylinders for the boot lid mechanism. Only the glass sunroof is powered by an electric motor. The following hydraulic cylinders are fitted on each side of the car: - 1 hydraulic cylinder in main hinge of CSC roof (1) - 1 hydraulic cylinder in side member of CSC roof (2) - 1 hydraulic cylinder in boot lid hinge (3) - 1 hydraulic cylinder in boot lid mounting frame (4)When the roof is operated, different lids and flaps are opened or closed while the CSC roof is stowed away completely or closed again. These movements, like the locking and unlocking of roof components, are also carried out by a clever system of mechanical couplings with the help of rods and Bowden cables via the Eos hydraulic cylinder. When the roof is operated, parts of the interior panelling also have to follow the movement of the roof. The whole mechanism of these components has been constructed without additional drives like electric motors, for example.18 Tasks of the hydraulic cylinders1. Hydraulic cylinders in main hinges - Lowering the roof package into the boot or lifting the roof package out of the boot - Performance of a desmodromic sideways swinging movement of the roof side members 2. Hydraulic cylinders in roof side members - Swinging the C-segment over the M-segment when opening the roof and swinging back the C-segment when closing the roof - Locking and unlocking the roof side members on the A-pillars - Locking or unlocking the C-segment on the M-segment 3. Hydraulic cylinders in the boot lid hinges - Carrying out the swinging movement of the boot lid - Opening and closing the roof side member flaps via cables 4. Hydraulic cylinders in mounting frame - Locking and unlocking the mounting frame to/from the boot lid for roof movement - Unlocking or locking the mounting frame from/to the body when roof completely open or closed - Opening and closing the covering flaps using cablesM-segmentC-segment Hydraulic cylinder in mounting frame (4)Hydraulic cylinder in roof side member (2) Mounting frame in boot lid Hydraulic cylinder in main hinge (1) Hydraulic unit Convertible roof actuation control unit S355_131 Hydraulic cylinder in boot lid hinge (3)19 BodyExternal sliding sunroofThe name “External Sliding Sunroof” (ESS) refers to the sunroof running over the M-segment and not under the roof panel as usual. The glass sunroof is operated with the inner part of the roof switch. Depending on how long the switch is pressed, an automatic run or a manual run can be carried out. Sunroof operation If you press the switch for longer than 0.5 seconds, an automatic run is started that moves the sunroof to ventilation position and stops there. Pressing the switch again for less than 0.5 seconds starts a second automatic run that opens the sunroof completely. If you press the switch for longer than 0.5 seconds when the sunroof is closed, a manual run is started. The sunroof opens manually for as long as the switch is pressed. Once it passes the ventilation position, the control unit switches to automatic mode and opens the sunroof completely. When closing the sunroof, there is also an automatic and manual mode. In manual closing mode, you can also stop the sunroof in an intermediate position by letting go of the switch.S355_040S355_039S355_117S355_04120 Design The main components of the sunroof module are the sunroof lid made from tinted glass and the sunroof mechanism with carrier sheets and mechanism gates. The guide rails and the mechanism gates for the sunroof are accommodated in the roof side members.Sunroof moves over the M-segment when openingSide roof members with guide railsElectrical drive in M-segment Drive shafts Sliding sunroof motor V1S355_054S355_105How it works Unlike the other movements of the car roof and boot lid, the sunroof is not driven by hydraulic cylinders, but by an electric motor, the sliding sunroof motor V1. It is located centrally at the rear of the M-segment and is connected to the ESS module via two pairs of flexible shafts. One shaft pair moves the sunroof upwards to the ventilation position. The other pair of shafts opens the sliding inner headliner.21 BodyM-segmentSliding inner headlinerM-segmentS355_130 S355_053The middle segment (M-segment) is made from steel and contains the electric motor for the sunroof as described. It is the central connecting point to the two roof side members. On the underside, the M-segment has space to hold the sliding inner headliner. The M-segment is placed at the bottom of the folded roof package that is transported to the boot by the main drive. The sliding sunroof is on top of the M-segment and the C-segment is placed on top of that. The roof package is only moved by the main drive once the sunroof and C-segment have reached their final positions on top of the M-segment and the boot lid along with all necessary flaps have been opened.M-segment C-segment SunroofFolded roof packageS355_10622 C-segmentThe C-segment is made up of a rear windscreen frame and the heated rear windscreen. The segment is connected to the roof frame via a four-link mechanism. The C-segment is moved by two separate hydraulic cylinders one in the left-hand roof side member and one in the right-hand roof side member.S355_116Rear windscreenFour-link mechanismS355_111S355_05123 BodyHow it works While the sunroof opens, the hydraulic pump starts to work. The roof control unit activates the hydraulic unit valves so that the following functions can be carried out independently of each other:- The hydraulic cylinder in the boot lid mounting frame unlocks the C-segment in the lower section. - The hydraulic cylinder in the roof side member unlocks the C-segment in the top section. - The C-segment is then swung over the M-segment by the hydraulic cylinders in the roof side members.Striker on C-segmentLatch in top section open/closedLatch Roof side memberS355_149S355_148Latch in lower section openLatch closed S355_150 S355_137 S355_13624 Main driveThe main drive connects the CSC roof to the body and carries out the actual retraction and extension movement of the roof into and out of the boot. For a short while, it has to support the whole weight of the CSC roof. The movement of the main drive is closely linked to the movements of the other roof components as well as the boot lid.S355_118The main drive is basically made up of the following components and modules on each side of the car: the main hinge the hydraulic cylinder in the main hinge the roof side member incl. various guide rails, connecting rods and latches the hydraulic cylinder in the roof side member the roof side member panelling the sensorsRoof side member with panelling and internal hydraulic cylinderS355_113 Main hinge Hydraulic cylinder in main hinge S355_059 S355_11425 BodyHow it works Before the roof package can be stored in the boot, the following sequence of interdependent movements needs to be carried out: - While the C-segment is opened by the two hydraulic cylinders, the two latches holding the roof side members to the A-pillars are released desmodromically. - The boot lid is moved to the open position by its hydraulic cylinders. The roof side member flaps are opened by this movement with the help of cables.Lock roof side member to A-pillarS355_107S355_061Unlock roof side member from A-pillarS355_124S355_06026 S355_062The whole roof package is now moved by the hydraulic cylinders in the main hinge towards the boot. A mechanical coupling swings the roof side members outwards with this movement so that the roof side members can pass the roof side member flaps and fit into the space provided on the left-hand and right-hand side of the car.Roof side member movement during “open roof” process Direction of travel S355_123 Movement of main arm pulls gate back Inside of main drive Direction of travelThe spreading movement of the roof side members is achieved with a gate that is connected to the main arm of the main drive via a lever system. If the main drive swings towards the boot to store the roof package there, the gate in the roof side member is pulled to the rear. This pushes the roof side member outwards.S355_121 Gate moves downwards and pushes roof side member outwards. Outside of main driveRoof side member movement during “close roof” process Direction of travel S355_122 Movement of main arm pushes gate towards the front Inside of main drive Direction of travelIf the roof package is raised out of the boot to close the roof, the gate is pushed to the front again inside the roof side member by the lever system. This movement swings the roof side members towards the inside again so that the roof side members can dock onto the A-pillars.S355_120 Gate moves towards the front and pulls roof side member inwards. Outside of main drive27 BodyBoot lidParcel shelf Linkage Hydraulic cylinder in mounting frameMounting frame Boot lid hinge Boot lidBoot lid hinge Hydraulic cylinder in boot lid hingeRoof package stowed awayS355_119The boot lid is made up of the following components: - Parcel shelf - Boot lid - Boot lid hinge with mounting frame and boot lid hinge The essential feature of the boot lid movement is that the movement for normal opening of the boot lid is totally different to that for stowing away the CSC roof. In order to store the roof package in the boot, the boot lid needs to open out over the tail as show in the diagram. This is possible thanks to the boot lid being connected to a mounting frame on each side. A hydraulic cylinder is fitted on each side of the mounting frame.The unit consisting of the boot lid and mounting frame is mounted on the body via the boot lid hinges. There is a hydraulic cylinder in each boot lid hinge. The boot lid is connected to the mounting frame via the boot lid hinges.28 Open covering flapMounting frame (here locked to boot lid)S355_055 Boot lid hinge Boot lid hingeSwinging movement to open the boot lidWhen opened normally (to access boot), the boot lid swings about an axis close to the C-pillar towards the C-segment. To lower the roof into the boot (cabriolet roof operation), the boot lid has to swing upwards and backwards about an axis near the taillights to provide the necessary space. These two opposing movements are made possible by the two independent hinges.S355_157Furthermore the covering flaps over the mounting frame mechanism are opened and closed. The hydraulic cylinders in the boot lid hinges now carry out the movement of the boot lid and open or close the roof side member flaps with the aid of Bowden cables.29 BodyHow it works If the CSC roof is opened or closed, the boot lid needs to be swung to the rear. To make this possible, the hydraulic cylinder unlocks the mounting frame from the body using latches (a+b) and locks it to the boot lid with latch (c). The boot lid can now be swung towards the rear by the hydraulic cylinder in the boot lid hinge. Once the roof operation has been completed, the hydraulic cylinder locks the mounting frame again to the body using latches (a+b) and unlocks latch (c) on the boot lid.S355_057S355_056Boot lid during cabriolet roof operationBoot lid during boot usageThe boot lid can now be opened again normally. During roof operation, the boot lid cannot be opened. When the roof is not being opened or closed, the boot lid can be opened normally, for example, to stow away luggage. The boot opens and closes manually — closing is supported by a power latching system.Hydraulic cylinder in mounting frame Boot lid connecting rods Mounting frame Boot lid striker b ca Latch c S355_058 Mounting frame Mounting frame locked to boot lidMounting frameS355_141 Striker on body Mounting frame unlocked from bodyLatch a S355_140 Mounting frame locked to body Mounting frame unlocked from boot lid S355_138 S355_13930 Covering flapsThese flaps close the opening that is occupied by the C-segment latch to the boot lid when the roof is closed. The covering flaps are on the boot lid and are each operated by the hydraulic cylinders in the mounting frame via a Bowden cable. If the roof is closed, the flaps will be in the “open” position. They are covered by the sliding interior panelling on the C-pillar. Once the roof is stored away, the covering flaps switch to the “closed” position when the boot lid closes.S355_127S355_126Roof side member flapsThe roof side member flaps close the space where the roof side members are stored when the roof package is stored in the boot. They each are driven by a Bowden cable due to the movement of the boot lid hinge. The position of the roof side member flaps is recorded by the roof sensor system via Hall sensors. This guarantees that the roof package is only stored away when the roof side member flaps are open.S355_067S355_12531 BodyPanels, flaps and coversRoof side member panel Roof corner panel Panel for right-hand roof side memberLower trim for rear windscreen frameSliding inner headlinerLower trim for rear windscreen frame Panel for left-hand roof side member Tensioned headliner S355_025When the cabriolet roof is operated, numerous parts of the interior lining have to follow the movement of the roof. The tensioned headliner is folded together in the area of the C-pillars via a complex system of cables and deflector lugs. The interior panels of the roof side members are also shortened by cables and deflector lugs.32 Deflector lug Guide spring Tensioning tape 1Sliding lining on roof side members To store the CSC roof in the boot, the lining of the roof side member needs to be shortened during the opening process. This is caused by sliding gate 3, which is operated by tensioning tapes 1 and 2. Tensioning tape 1 pulls the lining together via slider 3 when the roof is opened. Tensioning tape 2 opens out the lining via slider 3 when the roof is closed. The tensioning tapes run through various lugs. Tensioning tape 1 is also fed through a guide spring.Tensioning tape 2 Roof side member interior liningSliding gate 3S355_159Deflector lug Side section of tensioned headliner with reinforcements 4 5Moving tensioned headliner The tensioned headliner is folded in a controlled method when the CSC roof is opened. The tensioning tapes 1, 2, 3 and 4 on each side of the car are used for this. Rubber cord 5 is used as a guide for tensioning tape 4.31 2S355_158Precise laying and fastening of the tensioning tapes is the requirement for perfect and lasting operation of the CSC roof. Make sure you read the related repair literature before carrying out work on the tensioning tapes.33 BodySystem control unitRight-hand side of carc a d b 2 4 e f 3Legend Hydraulic cylinders: 1 in left-hand main hinge 2 in left-hand roof side member 3 in left-hand boot lid hinge 4 in left-hand boot lid mounting frame 5 in right-hand main hinge 6 in right-hand roof side member 7 in right-hand boot lid hinge 8 in right-hand boot lid mounting frame a b c d e f g h i Sunroof module M-segment C-segment Roof side member Boot lid Roof side member flap Convertible roof actuation control unit Hydraulic unit Luggage compartment cover1i hg 867 5Sensors Actuators Hydraulic line S355_089Left-hand side of carOperation of the CSC roof is a complex interaction of roof hydraulics and roof sensors. The whole movement process of the roof except for the ESS module is carried out by 8 hydraulic cylinders as described that are operated in pairs by a hydraulic unit. They are operated via three solenoid valves and several mechanical valves in the hydraulic unitvalve block.To allow the current positions of all moved components to be monitored by the roof control unit, the roof system has 12 Hall sensors. A microswitch in the boot checks the correct position of the luggage compartment cover. A temperature sensor on the hydraulic pump monitors the temperature of the hydraulic fluid.You will find detailed information on the Eos onboard supply and electrics in self-study programme SSP 379 “EOS 2006 – Electrical System”.34 Overview of operation proceduresThe following conditions need to be met so that the roof can be opened: Ignition on Battery voltage sufficiently high Boot closed Luggage compartment cover in boot locked correctly Enough space behind the car for boot lid to open (when equipped with Park Distance Control this is monitored by the Boot Lid Assist function.) - Roof switch pressed - Car travelling below 1km/hIf these conditions are met, the side windows will first start to lower. This is necessary because the roof package would otherwise collide with the rear side windows when it is lowered. At the same time as the side windows move, the sunroof starts to open and move over the M-segment.Side windows and sunroof open S355_075Once the side windows have passed a defined position, the movement procedure of the C-segment begins. Two sensors detect that the C-segment latches are unlocked at the top and bottom. Another sensor signals that the C-segment has reached its end position for opening the roof.C-segment opens S355_07635 BodyOnce the Boot Lid Assist (optional) has checked that there are no obstacles behind the car in the range of the boot lid movement, the unlocking of the mounting frame is signalled by two sensors in the latch bearings of the boot lid. At the same time, the boot lid is locked to the mounting frame. The boot lid must be fully opened before the roof package can be lowered into the boot. The boot lid can now swing towards the rear. The roof side member flaps open with this movement. A sensor on each flap monitors that the flaps are fully open.Boot lid and roof side member flaps openS355_077Once the C-segment opens, the two roof side members are unlocked from the A-pillars. A sensor in each roof side member confirms that they are unlocked.Unlock roof side membersS355_143The main drive now swings the roof package to the rear. The roof side members also swing outwards. Two sensors in the cowl inform the roof control unit that the roof is no longer in the front end position. Once the roof package reaches its position in the boot, this will also be confirmed by a sender in the main drive. The roof control unit thus recognises that the roof is in the rear end position.S355_079Roof package is stowed awayS355_07836 If the feedback “roof package stored in boot” is not received within 8 minutes after leaving the A-pillar, the roof will be lowered automatically in steps. Depending on the roof position reached, it is lowered by the force of gravity in the “open” or “close” direction.Boot lid and roof side member flaps close S355_080Side windows closeS355_082Once the roof package has reached its final position in the boot, the boot lid and the roof side member flaps start to close. Once the mounting frame is locked to the body and has been unlocked from the boot lid, the boot can be opened “normally” again. Upon completion of the roof operation, the side windows are raised again.37 BodyBoot Lid AssistThe Boot Lid Assist is a function that has been provided using the Park Distance Control components. It has the task of monitoring the area behind the car for obstacles that could block the movement of the boot lid as it opens. The space requirement for boot lid movement is approx. 38cm. The Boot Lid Assist scans a range of 50cm. Pressing the roof button activates the Boot Lid Assist function in the Park Distance Control system. If the system detects an obstacle, a constant tone sounds as a warning and a message appears in the dash panel insert display. The roof movement is interrupted. The procedure can, however, be continued despite the warning if you press the roof switch again.Obstacle S355_152The roof movement and thus opening of the boot lid is interrupted. Monitoring areaThe Boot Lid Assist is deactivated just before the boot lid is lowered into the scanning area.Just before the boot lid is lowered into the sensor scanning area, the Boot Lid Assist is deactivated as it cannot distinguish between the boot lid and a real obstacle. This means that if an obstacle appears after this point in time, for example, another vehicle pulls up close to the rear of the Eos while the boot is being opened for the roof package, it cannot be detected by the Boot Lid Assist.S355_15338 Occupant ProtectionAirbag and restraint systemsS355_027The extensive measures taken on the body to improve the passive safety are supplemented by the components for active safety. Due to the special requirements for cabriolets, there is also an active rollover protection system for when the roof is open in addition to the airbag and restraint system. The Eos has single-stage airbags for the driver and front passenger as well as side and head airbags in the seat backrests. Each door has a pressure sensor to detect side collisions. The front passenger airbag can be deactivated with a key switch in the glove compartment. The front seats have 3-point seat belts with belt force limiters and pyrotechnic belt tensioners. The two rear seats have 3-point belts with belt force limiters, but without belt tensioners.The airbags and belt tensioners can only be activated for 150ms after the power supply fails. In accidents, in addition to the airbag and belt tensioner functions, the fuel pump is switched off in all engine versions above a threshold value defined in the airbag control unit. When equipped with the 3.6l engine, the system also automatically disconnects the two 6-volt batteries.39 Occupant ProtectionRollover protectionRollover element extended Rollover element tensionedS355_161S355_152Even when there is no roof, a cabriolet has to provide occupants with the maximum protection if the car rolls over. In the Eos, this is provided by an active rollover protection system in addition to the A-pillar reinforcements and the doors. Like the New Beetle Cabriolet, there is an active rollover element behind each of the head restraints on the rear seat bench. Together with the two A-pillars they secure the crash survival space if the car rolls over.The rollover protection is triggered by the airbag control unit in severe front, side and rear collisions if the car rolls over or tilts extremely.40 EnginesEos engine rangeS355_028The 2006 Eos engine range includes four petrol engines with outputs ranging from 85kW to 184kW and a diesel engine delivering 103kW. The specific engines are: the 1.6l/85kW FSI engine the 2.0l/110kW FSI engine with 4-valve technology the 2.0l/147kW FSI engine with 4-valve technology and turbocharging the 3.2l/185kW V6 engine with multi-point injection the 2.0l/103kW TDI engine with 2-valve technology and diesel particulate filterAll of these engines have been further developed for use in the Eos. All engines fulfil the EU4 emissions standard. The TDI engine has a diesel particulate filter close to the engine.You will find detailed information on the engines in the following self-study programmes: SSP 296 “The 1.4l and 1.6l FSI engine with timing chain” SSP 316 “The 2.0 l TDI engine” SSP 322 “The 2.0 l FSI engine with 4-valve design” SSP 334 “The fuel system in FSI engines” SSP 337 “The 2.0l FSI engine with turbocharger”41 EnginesThe 1.6l/85kW FSI engineThe 1.6l/85kW FSI engine from the Golf Plus and Touran is available for the Eos. The following features have already been used in series production in these models. Technical features ● Lambda-1 operation (homogeneous operation) ● There is no fuel pressure sender for low pressure G410. The required fuel quantity is determined from the coolant temperature, intake air temperature and oil temperature. The pulse control factor (PWM signal) for controlling the electrical fuel pump is then obtained using a map. ● The connecting tube between the cylinder head and exhaust gas recirculation valve has changed. The exhaust gases are diverted away from the throttle valve in the intake manifold. This prevents coking of the throttle valve to a great extent.S355_084●The engine control unit software has been adapted to the changes.Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine Management Fuel BLF 4-cylinder in-line engineTorque and power diagram180 160 1598cm3 76.5mm Torque [Nm] 86.9mm 4 12:1 85kW at 6000 rpm 155Nm at 4000 rpm Bosch Motronic MED 9.5.10 Super unleaded RON 95 (torque increase in mid rev range when Super unleaded RON 98 is used) 140 120 100 80 60 40 20 1000 3000 5000 Engine speed [rpm] 90 80 70 60 50 40 30 20 10 7000 S355_086 Power [kW]Exhaust gas treatmentStarter catalytic converter, main catalytic converter, Lambda controlDo not run the car with Normal unleaded RON 91 because the ignition retardation will reach its control limit.Emissions standardEU442 The 2.0l/110kW FSI engine with 4-valve technologyThe 2.0l/110kW FSI engine from the Jetta and Passat Estate is available for the Eos. The following features have already been used in series production in these vehicles. Technical features ● Homogeneous mode (Lambda 1) ● A Lambda probe before the catalytic converter ● There is no fuel pressure sender for low pressure G410. The required fuel pressure is determined from the required fuel quantity, coolant temperature, intake air temperature and oil temperature. The pulse control factor (PWM signal) for controlling the electrical fuel pump is then obtained using a map.S355_083●●The throttle valve is made from plastic. It uses a contact-free sensor (not a potentiometer). There is no need for water cooling. The engine control unit software has been adapted to the changes.Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Fuel BVY 4-cylinder in-line engine 1984cm3 82.5mm 92.8mm 4 11.5:1 110kW at 6000 rpm 200Nm at 3500 rpm Bosch Motronic MED 9.5.10 Super unleaded RON 98 (Super unleaded at RON 95 with reduction in performance)Torque and power diagram220 200 180 160 Torque [Nm] 140 120 100 80 60 40 20110 100 90 80 70 60 50 40 30 20 10 1000 3000 5000 Engine speed [rpm] 7000 Power [kW]Exhaust gas treatmentTwo starter catalytic converters and a three-way catalytic converter with Lambda control EU4Emissions standardS355_08743 EnginesThe 2.0l/147kW FSI engine with 4-valve technology and turbochargerThe 2.0l/147kW FSI engine with turbocharger is also used in the Golf GTI, the Passat and the Jetta. The following features have already been used in series production in these vehicles.Technical features●S355_091● ●● ●● ●Single-pipe exhaust system with starter and underbody catalytic converter mounted near engine Ethanol-resistant Hitachi high-pressure pump There is no fuel pressure sender for low pressure G410. The required fuel pressure is calculated in the same way as for the 2.0l/110kW FSI engine. Turbocharger with improved efficiency Grey cast iron piston with spherical recessMechanical brake servo pump Continuously adjustable charge-air flapsYou will find further information on this engine in self-study programme SSP 337 “The 2.0l Turbo FSI Engine”.Technical dataEngine code Type Displacement Ignition sequence Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Camshaft timing adjustment Fuel BWA 4-cylinder in-line engine 1984cm³ 1-3-4-2 82.5mm 92.8mm 4Torque and power diagram330 300 270 240 Torque [Nm] 210 180 150 120 90 60 30 1000 3000 5000 Engine speed [rpm] 7000165 150 135 120 105 90 75 60 45 30 15 Power [kW]10.3:1 147kW at 5100 to 6000 rpm 280Nm at 1800 to 5000 rpm Bosch Motronic MED 9.1 42° crank angle Super Plus unleaded RON 98 (Super unleaded RON 95 with slight reduction in performance) Two three-way catalytic converters with Lambda control EU4Exhaust gas treatmentEmissions standardS355_09044 The 3.2l/185kW V6 engine with 4-valve technology and multi-point injectionThe top of the range engine for the Eos is the 3.2l V6 engine delivering 184kW (250hp) and producing a maximum torque of 320Nm.Technical features of engine management● ● ● ● ●Bosch Motronic ME 7.1.1 Plastic variable intake manifold Internal exhaust gas recirculation Non-return fuel system Secondary air inletS355_163Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Fuel BUB VR engine 3189cm3 84mmTorque and power diagram340 320 Torque [Nm] 300 280 260 240 220 200 180 4000 6000 2000 Engine speed [rpm]180 160 Power [kW] 140 120 100 80 60 40 2095.9mm 4 10.85:1 184kW at 6300 rpm 320Nm at 2500up to 3000 rpm Bosch Motronic ME 7.1.1 Super Plus unleaded at RON98 (Super unleaded at RON 95 with reduction in performance) Two three-way catalytic converters with constant Lambda control EU 4Exhaust gas treatmentS355_151Emissions standard45 EnginesThe 2.0l/103kW TDI engine with 2-valve technology and diesel particulate filterThe 2.0l/103kW TDI engine with 2-valve technology and diesel particulate filter is also available for the Passat model year 2006. Technical features ● 2-valve technology ● Catalytic-coated diesel particulate filter ● High-mounted turbocharger turned 180° to allow the diesel particulate filter to be placed close to the engine. ● Ceramic glow plugsS355_085Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management BMM 4-cylinder in-line engine 1968cm3Torque and power diagram400 320 Torque [Nm] 240 160 80 0100 80 60 40 20 0 Power [kW]81mm 95.5mm 2 18 : 1 103 kW at 4000 rpm 320Nm at 1750 rpm to 2500 rpm Bosch EDC 16 with unit injector system Diesel, min. 51CN Exhaust gas recirculation and diesel particulate filter1000 2000 3000 4000 Engine speed [rpm]Fuel Exhaust gas treatmentS355_088Emissions standardEU4You find information on the diesel particulate filter in self-study programme SSP 336 “The catalytic coated diesel particulate filter”.46 TransmissionEngine/gearbox combinations6-speed manual 0AJ6-speed manual 02S6-speed manual 02Q6-speed Direct Shift Gearbox DSG 02E1.6l/85kW FSI engine2.0l/110kW FSI engine2.0l/147kW TSI engine3.2l/185kW V6 engine2.0l/103kW TDI engine47 ChassisThe chassis is also configured for the special requirements of a cabriolet. The Eos therefore has an enhanced strut front axle that is based on the Golf 2004 front axle. The multi-link rear axle with aluminium hub carriers comes from the Passat 2006. On the front and rear axle, we have made sure that the springs, dampers and the stabilisers have been configured for sportiness. The second-generation electromechanical power steering is supplemented with the counter-steer support function. It allows stable straight running in cross winds or on roads that are inclined sideways. The brakes have been optimised and have hydraulic brake assist and ABS with ESP function as standard.●Second generation electromechanical power steering●ESP MK60 system from Continental Teves with hydraulic brake assist●Lightweight strut axle using the McPherson principle48 ●Tyre Mobility Set●Four-link rear axle with high transverse stiffness and decoupled longitudinal and transverse dynamicsS355_142●Tyre pressure monitoring system (optional)●Safety steering column, height and reach adjustableYou will find information on the chassis in self-study programme SSP 321 “The Golf 2004 – Chassis”.49 Heating and air conditioningThe Eos can optionally be equipped with the Climatic system with semi-automatic control or with 2C-Climatronic.S355_168As the passenger compartment can either be relatively sealed from environmental influences (coupé) or exposed to them (cabriolet roof open) the air-conditioning system needs to be flexible. The air-conditioning regulation has therefore been reconfigured for the Eos to increase driving comfort. During development, the focus was placed on making manual adjustment after opening the roof unnecessary. This was achieved by among other things: - adapting the fan voltage, - taking the greater sunlight intensity into consideration, - adapting the air distribution in heating mode, - adapting the compressor regulation and - the behaviour of the Climatronic.Compressor operation When the Eos is driven as a cabriolet, the airconditioning compressor only needs to be run if the required outlet temperature is below the intake air temperature. The intake air temperature is calculated from the measured outside temperature and a presumed increase of 3°C for the heat from the engine compartment. When the roof is closed, the compressor also runs when the outlet temperature is above the intake air temperature to dry the air and thus reduces misting of the windows.50 2C-Climatronic in the EosFan voltage In cabriolet mode, the passengers are, of course, exposed to greater air turbulence. If the Climatronic is in cooling operation and automatic mode, the fan voltage is lowered from the basic level. If heating mode is required, this voltage level is lowered even further. In cooling mode, the fan voltage is also raised in relation to the speed. We have made sure that the level of noise produced by the fan is below the other airflow noises.S355_033 FanSun intensity When the roof is open, all occupants are exposed to more intense sunlight from all sides. Therefore the values measured by the sun sensors in the instrument panel are used as a value for the air-conditioning regulation. The sunlight from the rear is also measured by a light-sensitive diode in the air-conditioning control panel.S355_155The 2-zone air-conditioning control is also available when the roof is open even though a large temperature regulation range is not possible like in coupé mode. The sun intensity factor has a higher priority for control of the outlet temperature and fan voltage than in coupé mode.Temperature sensor and light-sensitive diode in centre operating button of 2C-Climatronic S355_15651 Heating and Air ConditioningClimatronic regulation behaviour Pressing the “ON/OFF” button on the 2C-Climatronic control unit activates the automatic climate control. Since the occupants are exposed very quickly to the outside temperature conditions when the roof is opened, the automatic switch-over of the control logic from coupé to cabriolet has to be very fast. When closing the roof, the change-over of the control logic to coupé mode is more gradual. In cabriolet mode, there is no airflow regulation nor automatic cold air functions. The inside temperature sensor value for regulation in cooling mode corresponds with the outside temperature. In heating mode, the control value is calculated proportionally from the value measured by the inside temperature sensor and the outside temperature.S355_169The settings that are present upon the respective switch-over from cabriolet or coupé mode are stored by the 2C-Climatronic system. When the system returns to this operating mode, the stored values are applied again.Air distribution in heating mode To create a feeling of warmth when the outside temperature is low and the roof is open, the heated air is almost exclusively supplied via the footwell and the passenger vents because the windscreen cannot fog in cabriolet mode. As the speed of the car increases, the passenger vents supply a greater amount of air compared with the footwell vents. This is because there would otherwise be over-proportional heating of the footwell due to the climate conditions inside the car in cabriolet mode (back pressure). The air is only supplied to the defrost vents in automatic air-conditioning mode when the outside temperature is very low.52 Electrical SystemOnboard supplyThe circuit diagram shows which control units and components in the onboard supply communicate with each other via the CAN data bus in the Eos.J285 J334J533 J604 J412 R J503 J525 R78SDARSJ364 J345 J446J255 J519J400 G397 H8 G384J623 J743J393G303J527E221G85 J234 J745J667 J668J104 J500J386 J388 J256 J387 J389 J572 J573G197S355_102 J500 Power steering control unit J503 Control unit with display for radio and and navigation system J519 Onboard supply control unit J533 Data bus diagnostic interface J525 Digital sound package control unit J527 Steering column electronics control unit J572 Driver side easy entry control unit J573 Front passenger side easy entry control unit J604 Auxiliary air heater control unit J623 Engine control unit J667 Power output module for left headlight J668 Power output module for right headlight J743 Mechatronic unit for direct shift gearbox J74 Cornering light and headlight range control unit R Radio R78 TV tuner SDARS = Satelite Digital Audio Radio Services (digital audio satellite reception system)Legend E221 Operating unit in steering wheel G85 Steering angle sender G197 Magnetic field sender for compass G303 Interior monitor send and receive module 1 G384 Vehicle inclination sender G397 Rain and light sensor H8 Anti-theft alarm system horn J104 ABS control unit J234 Airbag control unit J255 Climatronic control unit J256 Convertible roof actuation control unit J285 Control unit with display in dash panel insert J334 Immobilizer control unit J345 Trailer detector control unit J364 Auxiliary heater control unit J386 Driver door control unit J387 Front passenger door control unit J388 Rear left door control unit J389 Rear right door control unit J393 Convenience system central control unit J400 Wiper motor control unit J412 Mobile telephone operating electronics control unit J446 Parking aid control unit53 Electrical SystemLightsHeadlightsThe headlights are equipped with the Advanced Frontlight System AFS including the Bi-Xenon cornering lights and automatic turn-off light for improved road illumination. The maximum swivelling angle of the cornering light is 15°. The turn-off light is aligned at approx. 80° to the car longitudinal axis. Both functions are activated by turning the steering wheel or switching on the turn signals.S355_030You will find more information on the cornering lights in self-study programme SSP 335 “Cornering Light System”.S355_132TaillightsThe taillights are divided by the boot lid. The reverse lights and the rear fog lights are located in the respective boot lid sections. The sidelight, brake and turn signal functions use LED technology on the Eos. The taillight, reverse light and rear fog light functions use normal bulbs.S355_03154 Convenience electricsInterior monitoringThe Eos interior monitoring system works when the roof is open and closed. It uses microwave technology and is therefore to a great extent not sensitive to movements outside the car, airstream or electromagnetic interference. If a child or dog, for example, is left briefly in the parked car, the interior monitoring system can be deactivated with a button in the storage compartment of the driver’s door.S355_032Electrical easy-entry functionThe Eos sees an electrically activated easy-entry function being used for the first time. It has the function of moving the front seats electrically to make access to the rear seats easier. It is operated with a rocker switch on the top side of the seat backrest. Flicking the switch in one direction activates the easy-entry fast forward movement and in the other easy-entry fast backward movement.S355_134S355_133 Easy-entry fast forward movement Easy-entry fast backward movementYou will find detailed information on the microwave technology used in the interior monitoring system and the electrical easy-entry function in SSP 397 “EOS 2006 – Electrical System”.55 Radio and NavigationSound systemS355_034A wide range of radio and navigation systems are available for the Eos. It can be equipped with the RCD 300 together with either 2 20W speakers, 4 20W speakers or 8 speakers. As an alternative to the RCD 300, the RCD 500 with 4 20W speakers, 8 speakers or with the Dynaudio sound package can be selected. A 6-CD changer can be added to the Eos audio system. The RNS 300 and the RNS MFD-DVD are available as navigation systems.You will find more detailed information on these audio systems in the user’s manual or self-study programme SSP 342 “Radio Systems”.56 Aerial conceptThe Eos aerial system is integrated in the boot lid and is invisible from outside. To make this possible, the boot lid is mainly made from plastic to allow the radio waves to reach the aerial system.Radio amplifier moduleAerial module carrierS355_035Design The most striking part of the system is a plate-shaped aerial module carrier that is fitted in the centre under the outer skin of the boot lid. It holds the aerial modules for: - Telephone (GSM, Global System for Mobile Communications), - SDARS (Satellite Digital Audio Radio Services) and - GPS (Global Positioning System). The radio amplifier module is accommodated on the right-hand side of the boot lid. It processes the signals from the AM/FM1 and the FM2 aerial wire and has two Fakra interfaces. The remote start aerial (optional with auxiliary heating) is integrated in the radio amplifier module.You will find detailed information on the Eos aerial system in self-study programme SSP 379 “EOS 2006 – Electrical System”.57 ServiceSpecial toolsName VAS 6205 Roof attachment device VAS 6365 Hinge supports Application Device for lifting off CSC roofFor holding roof in mounting positionVAS 6367 Support for side member VAS 6368 Key for barrel screw VAS 6369 Clamp for C-segmentHolds the roof in closed position so the roof side members can be removed or fitted.Adjusting tool for securing the roof side membersLocks the folded roof packageVAS 6370 Gauge for guide rails VAS 6371 Gauge for main bearing VAS 6372 Seal pliersFor adjusting the guide rails on the sliding sunroofFor checking and adjusting the main bearings of the CSC roofFor sealing the tensioning tapes for the side member liningVAS 6240-6 Straightening bracket set VAS 5007-27 Portal gauge58 GlossaryAUTO EUROPA “Volkswagen Autoeuropa – Automóveis Ltda.” is now one of the most modern car plants in Europe. It covers a total area of 2,000,000 square metres. Of that, 1,100,000 square metres is used for production and 900,000 for an industrial park for suppliers and service providers. The VW Sharan and the Seat Alhambra are produced there. Among other things, Palmela has a high-tech forging press department as well as an efficient bodyshop, paintshop and final assembly. The “Volkswagen Autoeuropa – Automóveis Ltda.” plant in Portugal has been operating since April 1995. It was set up in 1991 in an agreement between Volkswagen and Ford. The Palmela plant has been a hundred-percent subsidiary of Volkswagen AG since 1999.Volkswagen Autoeuropa – Automóveis Ltda in PalmelaS355_160IN SITU This term is Latin and literally means “in original place” or “on site”. If, for example, you observe a metabolism process “in situ”, this means that you observe the processes in living cells. The opposite would be “in vitro”. In this case, you would remove the cells and carry out the metabolism process in a test tube. In relation to the Eos, the rear seat bench is produced “in situ”, i.e. manufactured completely on a machine. As the wire frame is foamed into the upholstery, the rear seat bench no longer has to run through several different production stages in different locations.59 GlossaryPALMELA Palmela is a small town in the municipality of the same name in the district of Setúbal. This historical and very old town in the west of Portugal today has a population of around 16000. THERMOFORMED SHEETS In thermoforming (e.g. forging), the metal lattice is recrystalised during the shaping process. The recrystalisation prevents embrittlement and avoids a reduction in the tenacity of the workpiece as occurs during cold forming.PortugalPalmela municipalityS355_043 Spain60 Notes61 355© VOLKSWAGEN AG, Wolfsburg All rights and rights to make technical alterations reserved. 000.2811.69.20 Technical status 04.2006 Volkswagen AG Service Training VSQ-1 Brieffach 1995 38436 Wolfsburg❀ This paper was manufactured from pulp that was bleached without the use of chlorine.