TECHNICAL DOCUMENTATION

SSP 373 EcoFuel Natural Gas Drive in Touran and Caddy

PDFEN53 pages4 MB
SSP 373 EcoFuel Natural Gas Drive in Touran and Caddy - PDF cover

This PDF is currently unavailable.

Read document text
Service TrainingSelf-study Programme 373EcoFuel Natural Gas Drive in Touran and CaddyDesign and Function Why natural gas? Driving with natural gas relieves the burden on the environment. The emissions of carbon monoxide and nitrogen oxide are reduced by over 50%. Furthermore, when natural gas is burnt, the amount of carbon dioxide produced is 20-25% less than with conventional petrol engines. Also, from an economic viewpoint, driving a natural gas vehicle is a serious alternative because of the rising petrol and diesel prices. This self-study programme describes the design and function of vehicles for natural gas operation. The petrol mode in natural gas vehicles is only slightly different to when you drive vehicles that run exclusively on petrol.You will find basic information on the topic of natural gas in self-study programme no. 262 “Natural gas — an alternative fuel for motor vehicles”.S373_064NEWImportant NoteThe self-study programme shows the design and function of new developments. The contents will not be updated.For current testing, adjustment and repair instructions, refer to the relevant service literature.2 ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Vehicle population . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Service station network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Natural Gas Drive Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Touran EcoFuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Caddy EcoFuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Engine Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 The 2.0l/80kW natural gas engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Natural Gas Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Natural gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Natural gas system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 High-pressure side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 From high pressure to low pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Low-pressure side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Engine Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Engine control unit J623 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Dash panel insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Safety Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Natural gas system safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Functional Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Touran functional diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Natural gas tank labelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Special tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Test Yourself . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473 IntroductionVehicle populationThere are currently around 0.5 million natural gas vehicles in Europe. Italy accounts for over 430,000 of these natural gas vehicles.Vehicle population in Europe7,000900 600 39,100 3007,900 400 300 400 800 430,000S373_062The Caddy and Touran EcoFuel will be launched in the following European countries in 2006: Belgium Denmark Germany Estonia Finland France Greece Italy Latvia Lithuania Luxembourg Netherlands Austria Poland Portugal Sweden Slovakia Slovenia Spain Hungary Czech RepublicBulgaria and Rumania will follow in 2007.4 Service station networkThe development of the network across Europe is varied. In Italy, Switzerland and Germany, the supply of natural gas vehicles is not a problem. There are already over 660 natural gas garages in Germany. That should rise to 1,000 garages by the end of 2007. Drivers looking for natural gas garages can use special guide maps or, in Germany, for example, a national text message service that informs the driver about the nearest natural gas garage in relation to his location.2 4 45 4 16 8 660 9/10* 1 26/79* 28/40* 5** 10* 100 600 1 3/7* 4 4 3/7* 130 16 S373_061 304 2 25/10** non-public garages ** only for busesYou will find further information and addresses of natural gas garages in Germany on the Internet at www.erdgasfahrzeuge.de and www.gibgas.de.5 Natural Gas Drive ComponentsTouran EcoFuelThe Touran EcoFuel has the following additional components compared with the Touran with petrol engine: - a gas filler neck - four underfloor natural gas tanks each with a tank shut-off valve and a total capacity of approx. 115 litres - a gas pressure regulator - a gas fuel rail with four gas injection valves and the gas fuel rail sensor G401 - a back-up petrol tank with 13 litres capacityGeneral vehicle data 80kW/109hp output natural gas and petrol operation 1 engine control unit for both natural gas and petrol operating modes capacity of natural gas tanks approx. 18kg natural gas consumption approx. 5.9kg natural gas every 100km range in natural gas mode approx. 310km range in natural gas mode together with back-up petrol tank approx. 440kmGas pressure regulatorS373_073S373_081 Gas fuel rail with gas injection valves6 Gas filler neckS373_075S373_070 Stainless steel back-up petrol tankS373_039Natural gas tanks with tank shut-off valves and stainless steel natural gas pipesS373_0687 Natural Gas Drive ComponentsCaddy EcoFuelThe Caddy EcoFuel also has the following additional components: - a gas filler neck - four underfloor natural gas tanks each with a tank shut-off valve and a total capacity of approx. 160 litres - a gas pressure regulator - a gas fuel rail with four gas injection valves and the gas fuel rail sensor G401 - a back-up petrol tank with 13 litres capacityGeneral vehicle data 80kW/109hp output runs on natural gas and petrol 1 engine control unit for both natural gas and petrol operating modes capacity of natural gas tank approx. 26kg natural gas consumption approx. 6.0kg natural gas every 100km range in natural gas mode approx. 430km range in natural gas mode together with back-up petrol tank approx. 570kmGas pressure regulatorS373_073S373_081 Gas fuel rail with gas injection valves8 Stainless steel back-up petrol tankS373_070S373_071Gas filler neckS373_040Natural gas tanks with tank shut-off valve and stainless steel natural gas pipesS373_1149 Engine TechnologyThe 2.0l/80kW natural gas engineThis engine that has been optimised to run on gas is based on the 2.0l 85kW petrol engine. It is built in Mexico and basically differs from its petrol-driven relatives in terms of piston shape, the valve drive and the injection system. The engine is used both in the Touran EcoFuel and in the Caddy EcoFuel. Special features● ● ●●configured for natural gas operation single-spark ignition coil reinforced inlet valves and valve seat rings for inlet and outlet modified piston shape (flat piston instead of double compression piston with combustion chamber)S373_065Technical data Engine code Type Capacity [cm3] Bore [mm] Stroke [mm] Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Fuel BSX 4-cylinder in-line engine 1984 82.5 92.8 2 13.5 : 1 80kW at 5400 rpm 160Nm at 3500 rpm Motronic ME 7.1.1 Natural gas (high), natural gas (low) with reduced performance and range, Super plus unleaded petrol (RON 98) Lambda control EU4Torque and output curve[Nm] 240 220 200 180 160 140 120 100 80 60 [kW] 90 80 70 60 50 40 30 20 10 0 [rpm]Exhaust gas treatment Emissions standard2000 Torque [Nm] Output [kW]40006000S373_06310 Engine mechanics The engine has been revised to run on natural gas. Natural gas has an anti-knock index of 130 RON. This has allowed the compression ratio to be increased to 13.5 to 1. The higher compression has been achieved by using flat pistons. No additives have been added to the natural gas. Therefore no deposits can collect on the valve seats and valve heads of the inlet valves. Due to the higher loading, the inlet valves and the valve seats on the inlet and outlet have been reinforced.PetrolEcoFuel Piston surface without recessS373_100 Double compression piston with combustion chamber Flat pistonIntake manifoldUpper part of intake manifoldGas injection valve insertion pointsThe intake manifold is made up of two parts. The upper part of the intake manifold is made from plastic and forms the engine cover. The lower section of the intake manifold is made from diecast aluminium.S373_116Injector insertion points (petrol back-up mode)The intake manifold pressure sender G71 is fitted in the upper part of the intake manifold. The gas injection valves are inserted into the upper part of the intake manifold. The injection valves for petrol mode are located in the lower part of the intake manifold.Lower part of intake manifoldCompared with petrol engines, gas engines produce a slightly different sound. This is partly caused by a fall in pressure occurring at the valves when the gas injection valves open.11 Natural Gas SupplyNatural gasNatural gas is a combustible natural gas that is found in underground traps. It consists of a mixture of hydrocarbons. The exact composition depends on the source of the natural gas. The main component is methane. The proportion of methane is decisive for the combustion. The higher the proportion of methane, the higher the energy yield. Natural gas is available in two qualities as its composition varies depending on the source: High and low gas. High gas has a methane proportion of approx. 87% to 99%, low gas of approx. 80% to 87%.Natural gas systemIn the following section, we will show you the basic features of the design and function of the natural gas system. We will distinguish between: - the high-pressure side, - the transition from the high-pressure to the low-pressure side and - the low-pressure side.Transition from high- to low-pressure side High-pressure side Low-pressure sideGas filler neckNatural gas pipesGas fuel rail with gas injection valvesNatural gas tanks with tank shut-off valvesGas pressure regulatorS373_052High-pressure sideThe high-pressure side of the natural gas system is made up of: - the gas filler neck, - the stainless steel natural gas pipes and - the natural gas tanks with tank shut-off valves.12 Gas filler neck on TouranThe gas filler neck is under the tank filler cap on the right-hand side of the vehicle next to the petrol filler neck. The gas filler neck has a check valve and a metal filter. The gas filler neck is also protected against dirt with a cap.S373_036Gas filler neck on CaddyThe Caddy tank filler caps are on the left-hand side of the vehicle. The gas and petrol filler necks are also under the same tank filler flap on this car.Tank adapterS373_026The tank adapter is required when driving in Italy because some older Italian garages still have filling connectors that do not correspond with the current standard.S373_04313 Natural Gas SupplyNatural gas pipesThe natural gas pipes are made from stainless steel and are designed for pressures of up to 1000bar. They connect the gas filler neck to the first tank shut-off valve, the four tank shut-off valves and the final valve to the gas pressure regulator. From the gas filler neck to the input of the tank shut-off valve on the fourth natural gas tank, the natural gas pipes have an outer diameter of 8mm. This allows fast and quiet filling. The outside diameter of this natural gas pipe is 6mm from the output on the tank shut-off valve to the gas pressure regulator.S373_033To ensure a good seal on the natural gas pipe, the individual sections are connected on both sides using double-ferrule compression fittings. Between the engine and the depicted fitting on the underbody (behind the shaft outlet), all natural gas components on the Caddy and the Touran are the same. Behind the fitting in the direction of the natural gas tank, they are laid differently depending on to the features of the car. The natural gas pipe is laid parallel to the petrol line.Seal location Seal wedge Union nut Natural gas pipe S373_08814 Tank systemTank system in TouranNatural gas tank arrangement The Touran EcoFuel has four natural gas tanks with a total volume of approx. 115 litres. All four natural gas tanks have different sizes in order to use the available space under the underbody in the best possible way. The natural gas tanks are mounted on two tank racks. The front rack is bolted to the underbody in front of the rear axle. Two natural gas tanks and the back-up petrol tank are accommodated on it. The capacity of the back-up petrol tank is approx. 13 litres. The two smaller natural gas tanks are located on the tank rack behind the rear axle.S373_069 Natural gas tank 3 (34l) Natural gas tank 4 (54l) Rack with plastic cover Natural gas tank 2 (14l) Natural gas tank 1 (12l)S373_045Back-up petrol tankSection of exhaust gas system with rear silencerThe exhaust gas system layout has been adapted to the natural gas tank location. This arrangement also prevents the natural gas tank being warmed and thus the pressure in the natural gas tanks rising.Rear silencerS373_08315 Natural Gas SupplyTank racks with plastic cover The two tank racks carrying the natural gas tanks and the back-up petrol tank in the Touran are tub-shaped and made from steel sheet. The racks are bolted to the underbody with mounting lugs and have the additional function of protection the natural gas tanks, for example, if the vehicle bottoms out on bad roads. The natural gas tanks are fastened securely to the tank racks with two plastic covered metal straps. To remove the natural gas tank, the tank racks have to be removed from the vehicle. The tank rack in front of the rear axle carries the two large natural gas tanks with 54 and 34 litres capacity as well as the back-up petrol tank. The smaller tank rack behind the rear axle carries the two smaller natural gas tanks with 14 and 12 litres capacity.S373_110 Front tank rackRear tank rackS373_111Each tank rack has its own plastic cover that protects the natural gas tanks, the tank shut-off valves, the natural gas pipes and the back-up petrol tank against stone chips and dirt.Front plastic coverS373_112Rear plastic coverS373_11316 Tank system in CaddyNatural gas tank arrangement The four natural gas tanks in the Caddy EcoFuel each have a capacity of 40 litres. As on the Touran, two natural gas tanks are mounted in front of the rear axle and two natural gas tanks behind it. The back-up petrol tank is located between the front natural gas tanks and the rear axle. Unlike the Touran, the natural gas tanks on the Caddy are held under the underbody with straps. There is a plastic cover similar to the Touran.S373_066 Back-up petrol tankS373_067 Natural gas tank 4 Natural gas tank 3 Natural gas tank 1 Natural gas tank 2The exhaust gas system runs completely along the front passenger side past the natural gas tanks. The rear silencer is mounted crossways behind the rear natural gas tank.S373_094 Rear silencer17 Natural Gas SupplyFilling procedure for EcoFuelThe natural gas flows into the gas filler neck with integrated filter and check valve through the natural gas pipes to the tank shut-off valve on the first natural gas tank. Here the natural gas flows through another check valve and pushes the valve in the tank shut-off valve upwards. The natural gas now reaches the first natural gas tank. At the same time, the natural gas flows via the natural gas pipe to the tank shut-off valve on the second natural gas tank and, from there, to the tank shut-off valves on the two last natural gas tanks so these tanks are also filled. The filling process is complete when the same pressure is present in the high-pressure side of the natural gas system as in the garage filling system (approx. 200bar). The natural gas gets as far the gas pressure regulator on the high-pressure side and can only be fed to the engine from there once the engine control unit powers the high pressure valve for gas mode and thus opens it.High-pressure sideGas filler neck with integrated filter and check valveS373_101 Natural gas tank 1 with tank shut-off valve and check valveNatural gas tank 2 with tank shut-off valveNatural gas tank 3 with tank shut-off valveNatural gas tank 4 with tank shut-off valveGas pressure regulatorHigh-pressure valve for gas mode18 Check valvesCheck valve in gas filler neck Filter sieveTwo mechanical check valves are fitted on both natural gas vehicles. One valve is located on the gas filler neck, the other on the tank shut-off valve on the first natural gas tank. How they work The natural gas tank is filled at a high pressure of approx. 200bar. This pressure pushes the valve ball out of its seat against the force of the pressure spring. The natural gas then flows through the filter sieve into the natural gas tanks. Once the pressure on the input side of the valve drops, the springs and filling pressure reached in the natural gas tanks push the ball back into its seat. This prevents the gas flowing back.S373_098 Ball seat Check valve openS373_099 Check valve closedTank shut-off valveTank shut-off valve 1Shut-off tapAs described, each natural gas tank has a complex tank shut-off valve. It consists of: - the manual shut-off tap, - the connecting thread for the natural gas tank, - the connecting thread for the stainless steel natural gas pipe, - the flow restrictor, - a thermal fuse, - a check valve* and - the tank shut-off valves 1 to 4 N361, N362, N363 and N429 (depending on natural gas tank).Check valve* Connecting thread for natural gas pipeS373_049Flow restrictorConnecting thread Thermal release for natural gas tank* only natural gas tank 119 Natural Gas SupplyDesignTank shut-off valveShut-off tap Natural gas tank 1 Connecting thread for natural gas pipe in direction of next tankThermal fuseFlow restrictorS373_107 Check valve* with connecting thread Natural gas pipe in direction of gas filler neck Connecting thread for natural gas pipe in direction of gas filler neck * only natural gas tank 1The schematic diagram of the tank shut-off valve shows you the interaction of the valve components. When natural gas enters the first tank shut-off valve while you are filling up, it first has to flow through the return valve. Then the natural gas arrives at the valve in the tank shut-off valve module and pushes the valve upwards with a high pressure. The route to the natural gas tank is now open and natural gas can reach the natural gas tank.The natural gas passes the manual shut-off tap and then through the flow restrictor into the natural gas tank. A separate fine channel connects the natural gas tank directly to the thermal fuse.20 Tank shut-off valves 1 to 4 N361, N362, N363 and N429Tank shut-off valve Tank shut-off valveS373_020The tank shut-off valves are solenoid valves and are controlled by the engine control unit in natural gas mode. They are part of the tank shut-off valve. The tank shut-off valves close the access to the natural gas tanks. In natural gas mode, they are opened by the engine control unit. They are opened by the filling pressure of the natural gas when you fill up.Cross-section of tank shut-off valve Coil Tank shut-off valvePlunger ValveNatural gas tankS373_017SpringValveOperation duringnatural gas filling The tank shut-off valve is not powered while the car is filled. Due to the high, filling pressure when the car is filled up, the valve is pressed upwards against the spring force and opens the route to the natural gas tank. Once you have finished filling up, the spring pushes the valve downwards and closes the path to the natural gas tank.S373_050 Filling pressure opens valve21 Natural Gas SupplyOperation innatural gas mode The engine control unit powers the tank shut-off valve. The magnetic field pulls the valve upwards and opens the route to the natural gas tank. When the natural gas mode is ended, the engine control unit switches the tank shut-off valve off and the valve is pushed downwards by the spring. The access to the natural gas tank is closed.SpringMagnetic fieldValveS373_130Effect upon failure When not powered, the tank shut-off valves are closed. If all valves are not activated or they are faulty, natural gas operation is not possible. As soon as a valve is working, the vehicle continues in natural gas mode as natural gas is available from this natural gas tank. All tank shut-off valves are diagnosis capable. Electrical circuitJ623N361N362N363N429 S373_104When a crash signal is issued, the tank shut-off valves are closed automatically. The airbag control unit sends a signal to the engine control unit via the CAN data bus.22 Flow restrictorThe flow restrictor is a safety valve and is located in the connecting flange for the natural gas tank. Task It prevents unwanted, sudden flows of gas from the natural gas tanks after the natural gas pipe has been damaged or if the gas pressure regulator is faulty.Flow restrictorS373_025How it worksS373_016 Flow restrictorSealing cone If there is a constant high pressure, the flow restrictor will remain open.If the natural gas pipes are suddenly damaged, the pressure in the pipe system will fall suddenly. If the pressure in the natural gas tank is approx. 2 bar higher than the pressure in the natural gas pipe, the sealing cone will be pressed into the cone seat by the pressure in the natural gas tank. The natural gas tank is now sealed and no natural gas can escape from the natural gas tank.S373_002 Sealing cone If there is a sudden fall in pressure, the flow restrictor will close.Natural gas is odourless. An odorant is added to the natural gas to detect small leaks in natural gas systems.Cone seat S373_00123 Natural Gas SupplyThermal releaseThe thermal release is also part of the tank shut-off valve module. Task It prevents the natural gas tanks bursting if the pressure rises excessively because of high temperatures. The thermal release is installed in such a way that direct release of the natural gas into the atmosphere is possible.Thermal releaseS373_023How it worksS373_015 Thermal releaseThe main part of the thermal release is a small glass tube containing a fluid that seals the gas leak. At temperatures above 110°C, the liquid in the glass tube will expand and cause it to burst. The gas outlet can now open. The natural gas escapes from the natural gas tanks into the atmosphere and can be released there in a controlled manner without, for example, a backflash occurring or the natural gas tanks bursting due to high temperatures if the vehicle is on fire.Drainage channelGas outlet The glass tube closes the gas outlet.Glass tube Flow outlet S373_007 The glass tube bursts and gas can escape.S373_008Effect of heat24 Manual shut-off tapThe mechanical shut-off tap allows you to close the natural gas tank manually with a tool so it is gas-tight. For safety reasons, this is necessary whenever the natural gas tank is removed or fitted again. The drainage channel for the thermal release is also open when the shut-off tap is closed for safety reasons.S373_022Shut-off tap (without hand wheel)Shut-off tapS373_013 Drainage channelThermal releaseShut-off tap openShut-off tap closed S373_003, S373_004Please see ELSA for more detailed information on repair work.25 Natural Gas SupplyFrom high pressure to low pressureGas pressure regulatorThe gas pressure regulator is mounted on the longitudinal member at the front right of the engine compartment. Task The gas pressure regulator has the task of reducing the natural gas pressure from 200bar to approx. 6bar. The relaxation of the natural gas occurs in the gas pressure regulator in a single pressure reduction stage. It thus separates the high-pressure side of the natural gas system from the low-pressure side.Gas pressure regulatorS373_031Fuel tank pressure sensor G400Design The gas pressure regulator is made up of the following components: coolant connections to engine cooling system integrated filter on gas input fuel tank pressure sensor G400 high-pressure valve for gas mode N372 pressure reduction stage mechanical excess pressure valveGas input with filter from natural gas tankCoolant connectionsMechanical excess pressure valveHighpressure valve for gas mode N372 Pressure reduction stage Gas output to gas fuel rail S373_03526 The reduction stage on the gas pressure regulator consists of: the high-pressure chamber with regulating piston the low-pressure chamber with mechanical excess pressure valve the diaphragm disc the springFuel tank pressure sensor G400 High-pressure gas input from the natural gas tanks Low-pressure gas output to engineFilter Excess pressure valveHigh-pressure valve for gas mode N372High-pressure chamber Low-pressure chamber Pressure reduction stage Regulating piston Diaphragm disc SpringLow-pressure section High-pressure section S373_01827 Natural Gas SupplyHigh-pressure valve for gas mode N372Gas flowThis component is built into the side of the gas pressure regulator. Task The high-pressure valve for gas mode closes or opens the access to the reduction stage of the gas pressure regulator. It thus interrupts the connection between the natural gas tank and the engine and thus represents a further safety component in the natural gas system. To perform this task, the high-pressure valve for gas mode is closed in unpowered state. Effect upon failureS373_055 N372 not poweredIf the high-pressure valve for gas mode cannot be powered by the engine control unit, only back-up petrol mode will be possible.Fuel tank pressure sensor G400This pressure sensor is screwed from above into the gas pressure regulator. Task The tank pressure sensor calculates the current natural gas pressure in the high-pressure side of the natural gas system. Using this value, the engine control unit recognises the filling level of the natural gas tank. Effect upon failure If the signal from the tank pressure sensor fails, the fuel gauge for the natural gas tanks will drop to zero. The vehicle will continue to run in natural gas mode as long as a natural gas pressure above 6bar is present at the gas fuel rail sensor G401.G400 Gas flowHigh-pressure chamberS373_05628 Reduction stageTask The natural gas pressure is reduced from high pressure to low pressure in the pressure reduction stage. FunctionHighpressure chamber Regulating piston Diaphragm disc Low-pressure chamber SpringIf the high-pressure valve for gas mode is opened by the engine control unit, the natural gas will flow at high pressure to the regulating piston in the high-pressure chamber. The regulating piston is connected to the low-pressure chamber by a spring-loaded diaphragm.S373_057If the natural gas pressure in the low-pressure chamber is lower than 6bar, the diaphragm and the regulating piston is pressed upwards by the pressure spring. The regulating piston opens the passage to the high-pressure chamber. Natural gas now flows from the high-pressure chamber into the low-pressure chamber.S373_058 Spring pushes diaphragm disc and regulating piston upwards.29 Natural Gas SupplyThe pressure in the low-pressure chamber rises due to the incoming natural gas. If the pressure reaches 6bar, it presses the diaphragm downwards against the spring force. This causes the regulating piston connected to the diaphragm to close the connection to the high-pressure chamber.S373_059 The gas pressure pushes diaphragm disc and regulating piston downwards.When natural gas is consumed by the engine, the natural gas pressure in the low-pressure chamber falls. The spring now pushes the diaphragm disc upwards again, which opens the regulating piston. Natural gas flows into the low-pressure chamber again.S373_060 Spring pushes diaphragm disc and regulating piston upwards again.30 Coolant connectionsIf the natural gas is regulated from 200bar down to 6bar, the natural gas will expand. It draws thermal energy from its surrounds so the gas and its surrounds cool down. The process is similar to the behaviour of the coolant in the evaporator of an air-conditioning system. Task The gas pressure regulator is connected to the coolant system via the coolant connections. This prevents the gas pressure regulator icing.Coolant connectionRisk of icing on regulating pistonS373_105Regulating pistonYou will find more information on the natural gas mode operating conditions on pages 36/37 of this self-study programme.31 Natural Gas SupplyLow-pressure sideGas fuel railThe gas fuel rail is mounted on the upper part of the intake manifold. It has four electrically controlled gas injection valves N366 to N369 as well as the gas fuel rail sensor G401.G401S373_081Gas fuel rail Gas injection valveGas injection valves N366, N367, N368 and N369The gas injection valves are inserted into the cylinder intake ducts. They are activated by the engine control unit in natural gas mode with a pulse-width modulation signal. The opening times of the gas injection valves depend on:S373_082-the engine speed, the engine load, the natural gas quality and the natural gas pressure in the gas fuel rail.Gas injection valveEffect upon failure As soon as one gas injection valve fails, the engine control unit switches to back-up petrol mode.S373_08032 Gas fuel rail sensor G401The gas fuel rail sensor is mounted on the left-hand front side of the gas fuel rail. It determines the natural gas pressure in the fuel rail.Signal use The engine control unit uses the signal from the sensor to calculate and control the opening times of the injection valves.G401 S373_030Effects of signal failure If the pressure in the gas fuel rail rises above the value 10.5bar or if the sensor signal fails, the vehicle will switch to back-up petrol mode.33 System OverviewWith example of TouranSensorsEngine speed sender G28 Hall sender G40 Accelerator position sender G79 Accelerator position sender 2 G185Clutch position sender G476 Brake pedal switch GF47 Throttle valve module J338 Throttle valve drive angle sender 1 for electric throttle G187 Throttle valve drive angle sender 2 for electric throttle G188Engine control unit J623Intake manifold pressure sender G71 Intake air temperature sender G42 Coolant temperature sender G62 Radiator outlet coolant temperature sender G83 Coolant shortage indicator sender G32Knock sensor 1 & 2 G61, G66 Brake light switch FFuel tank pressure sensor G400Gas fuel rail sender G401Oil level and oil temperature sender G266CAN data busLambda probe G39 Lambda probe after catalytic converter G130 S373_08434 Control elementsFuel pump switch-off relay J333 Fuel pump relay J17 Fuel system pressurisation pump G6 Injectors for cylinders 1-4 N30, N31, N32, N33Ignition coils 1-4 with output stage N70, N127, N291, N292Gas injection valve 1-4 N366, N367, N368, N369High-pressure valve for gas mode N372Valves 1-4 for tank shut-off N361, N362, N363, N429Throttle valve module J338 Throttle valve drive for electric throttle G186Heater element for crankcase breather N79Active charcoal filter system solenoid valve N80Control unit with display in dash panel insert J285 S373_085Lambda probe heater Z19Lambda probe 1 heater after catalytic converter Z29Only the sensors and actuators that are required exclusively for natural gas mode are highlighted.35 Engine ManagementEngine control unit J623The engine control unit is mounted in the centre of the plenum chamber. It regulates the mixture preparation in natural gas and back-up petrol mode.Engine control unit functions in natural gas modeEngine start - Coolant temperature below 15°C: Start in petrol mode - Coolant temperature over 15°C: Start in natural gas mode Conditions for natural gas mode - Coolant temperature above 15°C - Natural gas pressure in the gas fuel rail above 6bar Engine start after filling up with natural gas Start always in petrol mode. The switch-over to natural gas mode occurs upon activation of Lambda control or after the engine has been running for 3 minutes at the latest.J623S373_129Lambda regulation in natural gas mode The mixture composition is regulated to Lambda 1 by the engine control unit in natural gas and petrol back-up mode. Depending on the quality of the natural gas used (high or low gas), the engine control unit needs to adjust the mixture. The Lambda probe measures the exhaust gas composition and sends the result as a signal to the engine control unit. Using the signal, the engine control unit calculates the mixture composition that is currently required (air/natural gas). The engine control unit changes the opening times of the gas injection valves to control the mixture composition.36 Adaptation of the natural gas used The engine control unit needs to adjust the opening times of the gas injection valves to the natural gas quality used after you fill up with natural gas. The engine control unit recognised that a filling procedure has occurred using the fuel tank pressure sensor G400.S373_108If the vehicle has been filled up with high gas, a richer mixture results due to the higher proportion of methane in the exhaust gas and accordingly a leaner mixture with low gas. The engine control unit recognises the mixture composition using the exhaust gas quality that is detected by the Lambda probe. If the exhaust gas quality does not correspond with the current mixture composition, the engine control unit presumes that a different natural gas quality has been filled and adjusts the opening times of the gas injection valves to the current natural gas quality.On-board diagnose II The on-board diagnosis checks all components and systems relevant to the exhaust gas while the vehicle is running. It stores the malfunctions and indicates exhaust gas-related errors with a warning lamp (MIL).37 Engine ManagementDash panel insertThe following indicators for natural gas mode and for petrol back-up mode are located in the dash panel insert: - Petrol back-up mode warning lamp - Petrol level bar indicator - Analogue natural gas supply gaugeThere are two different versions of the dash panel insert: - one for the Midline versions of the vehicles and - one for the Highline versions of the vehicles.Dash panel in Midline versionS373_095 Gas supply gaugeIf the arrow next to or above the bar indicator is illuminated, the engine is running on petrol. Once the arrow extinguishes, the vehicle is driving with natural gas again. The natural gas mode is possible from an engine coolant temperature of over 15°C. The engine control unit switches between gas and back-up petrol mode automatically.Warning lamp for back-up petrol modePetrol supply gauge Gas supply gauge S373_09638 Dash panel in Highline versionS373_086 Gas supply gaugeBack-up gauge in natural gas modeS373_087 Petrol supply gauge Warning lamp for back-up petrol mode39 Safety ConceptNatural gas system safetyDuring the development of the two Caddy and Touran EcoFuel natural gas vehicles, particular focus was placed on safety in the area of the natural gas system. To illustrate this, we will summarise the constructive and functional features that influence the safety of the natural gas system for you.- All high-pressure pipes and connecting elements are made from seamless stainless steel. These components are extremely corrosion-resistant and thus not prone to leaks. - There is a tank shut-off valve on each of the four natural gas tanks. In addition, the gas pressure regulator has a high-pressure valve for gas mode. These five valves automatically interrupt the gas supply when the engine is not running, in petrol mode as well as in crashes. - The flow restrictor in the tank shut-off valves prevent natural gas leaking from the natural gas tanks if a pipe is damaged. - In addition, a check valve has been fitted on the tank shut-off valve for natural gas tank 1. It prevents backflow and thus gas escaping through the filling system if, for example, the gas filler neck happens to be leaking.Natural gas tank 4 with tank shut-off valveTank shut-off valve module with the actual valve, flow restrictor, thermal release and shut-off tapNatural gas tank 3 with tank shut-off valveNatural gas tank 2 with tank shut-off valve Natural gas tank 1 with tank shut-off valve and check valve S373_125 Gas filler neck with integrated filter and check valve40 The natural gas system on the Touran Gas fuel rail Flexible braided hose Gas fuel rail sensor G401G400 Gas pressure regulator with high-pressure valve for gas mode N372 and fuel tank pressure sender G400 N372High-pressure natural gas pipe made from stainless steel S373_124 Double-ferrule compression fitting- A flexible braided hose is used between the gas pressure regulator and gas fuel rail. - The whole natural gas system on both vehicles is installed so that it has the best possible protection against damage.- All components and mountings were tested in front and rear collisions.Service and maintenance work on the high-pressure pipes of the natural gas system may only be carried out by specialist technicians. Please make sure you read the latest instructions in ELSA.41 Functional DiagramTouran functional diagramJ519 J681J271SSSSSSSSSSSG476 N30 N33J682J623UN70N127N291N292N429N361N363N362N79G401N80S373_076 G476 J271 J519 J623 J681 J682 N30 N31 N32 N33 N70 N79 N80 N127 N291 Clutch position sender Motronic current supply relay, on E-box, on left-hand side of engine compartment Onboard supply control unit Engine control unit Terminal 15 voltage supply relay Terminal 50 voltage supply relay Injector for cylinder 1 Injector for cylinder 2 Injector for cylinder 3 Injector for cylinder 4 Ignition coil 1 with output stage Heater element for crankcase breather Active charcoal filter system solenoid valve 1 Ignition coil 2 with output stage Ignition coil 3 with output stage N292 N361 N362 N363 N429 S U Ignition coil 4 with output stage Valve 1 for tank shut-off Valve 2 for tank shut-off Valve 3 for tank shut-off Valve 4 for tank shut-off Fuse Battery42 J519SSS J104Input signal Output signal Positive Earth CAN data busG47G39Z19Z29G130J643J333N366 J17N367J623G6G400G185G79 J338 G186 G188 G187 G40 G61S373_077 G6 G39 G40 G61 G79 G130 G185 G186 G187 G188 G400 G401 J17 Fuel pump Lambda probe Hall sender Knock sensor 1 Accelerator pedal position sender Lambda probe after catalytic converter Accelerator pedal position sender 2 Throttle valve drive for electric throttle Throttle valve drive angle sender 1 for electric throttle Throttle valve drive angle sender 2 for electric throttle Fuel tank pressure sensor Gas fuel rail sensor Fuel pump relay on relay carrier on left under dash panel J104 J333 J338 J519 J623 J643 J681 N366 N367 Z19 Z29 ABS control unit Fuel pump switch-off relay Throttle valve module Onboard supply control unit Engine control unit Fuel supply relay Terminal 15 voltage supply relay Gas injection valve 1 Gas injection valve 2 Lambda probe heater Lambda probe 1 heater after catalytic converter43 Functional DiagramConvenience CAN data busDash panel insert CAN data busJ285J527 J533 C/DFM G411 K192 G1J119 Y25Drive CAN data Diagnostic connection N368 N369 bus GInput signal Output signal Positive Earth CAN data busINOUTG62G66G28G71 G42G83S373_078 G G1 G28 G42 G62 G66 G71 G83 G411 J119 J285 J519 J527 J533 J623 J681 Fuel gauge sender Fuel gauge Engine speed sender Intake air temperature sender Coolant temperature sender Knock sensor 2 Intake manifold pressure sender Radiator outlet coolant temperature sender Natural gas gauge Multifunction display Control unit with display in dash panel insert Onboard supply control unit Steering column electronics control unit Data bus diagnostic interface Engine control unit Terminal 15 voltage supply relay K192 N368 N369 Y25 Natural gas mode warning lamp Gas injection valve 3 Gas injection valve 4 Segment display in dash panel insertC/DFM Alternator field monitor (engine control unit adjusts the alternator output to the voltage requirement using the engine speed.)44 ServiceNatural gas tank labellinga Natural gas tank bc S373_053 k i h g f e dLegend and meaning of stamped labels a b c d e VW 1G0201158 BC (example) 50.2kg Do not use after 08/2025 54l PH 30MPA Item number Curb weight Indication of life of natural gas tank (expiry date) Capacity Test pressure of 30MPA (30 MegaPascal = 30,000,000 Pascal = 300bar) Test code Max. filling pressure of 26MPa (260bar) Filling note with date of manufacture Operating pressure of 20MPa (200bar) at a temperature of 15°C ECE normf g h i71675516 U.T. PW26MPA CNG only 08/2005 PS 20MPA / 15°Ck(E) 110R-00102The natural gas tanks have to be replaced after 20 years. Information on the year of manufacture is given on the stamped test label on the natural gas tanks.45 ServiceSpecial toolsName T10349 Magnetic release tool Tool Application The magnetic release tool is used to empty the natural gas tank when the tank shut-off valve is not powered.S373_128 T10350 Special wrench Wrench for removing and fitting the tank shut-off valvesS373_127 T10351 Holder for natural gas tank The holder is used to prevent the natural gas tanks rolling away while they are being fitted or removed. The holder has different radii on the top and bottom for the different sized natural gas tanks.S373_12646 Test YourselfWhich answers are correct? One or several of the answers could be correct. 1. At what pressure are the natural gas tanks filled? a) 15bar b) 200bar c) 6bar2.Which valve is also fitted on the tank shut-off valve for the first natural gas tank? a) An electromagnetic valve b) A check valve c) A mechanical shut-off valve3.The pressure in the gas fuel rail is ... a) 10bar b) 9bar c) 6bar4.How high is the anti-knock index of natural gas? a) 130RON b) 95RON c) 110bar47 Test Yourself5. Name the main components of the tank shut-off valve.d) a)b) e) c) S373_0496.Who may carry out work on the high-pressure side of the natural gas system? a) Service technician b) Any mechanic c) Only a trained person with proof of qualification7.What safety system prevents the natural gas tank bursting in a fire? a) The gas pressure regulator b) The thermal release c) The tank shut-off valve8.What should you observe when carrying out repairs on the natural gas tanks? a) The mechanical shut-off taps should be closed on the tank shut-off valves. b) The natural gas tanks need to be checked for leaks and damage. c) The thermal fuses should always be replaced.48 Notes49Answers 1. b); 2. b); 3. c); 4. a); 5. a) Shut-off tap, b) Flow restrictor, c) Natural gas tank connecting thread, d) Tank shut-off valve, e) Thermal fuse; 6) c; 7) b; 8) a, b 50 51 373© VOLKSWAGEN AG, Wolfsburg All rights and rights to make technical alterations reserved. 000.2811.80.20 Technical status 05/2006 Volkswagen AG Service Training VSQ-1 Brieffach 1995 38436 Wolfsburg❀ This paper was manufactured from pulp that was bleached without the use of chlorine.