TECHNICAL DOCUMENTATION

SSP 417 The Passat CC 2009

PDFEN68 pages4 MB
SSP 417 The Passat CC 2009 - PDF cover

This PDF is currently unavailable.

Read document text
Service TrainingSelf-study Programme 417The Passat CC 2009 Volkswagen has developed its first four-door coupé on the basis of the 2006 Passat. The new Passat CC Comfort Coupé combines the dynamics of a sports car and the comfort of a saloon without making compromises. The advantage of this concept is that you do not have to go without all-round comfort nor without a sporty elegant design. All requirements are met in one car. The Passat CC is therefore more than just a sporty saloon. It is a 4-door/4-seater with striking coupé looks and sporty engines. The Passat CC stands for elegance & style, sportiness and dynamism.It is therefore aimed at two groups of buyers: the saloon drivers, who are fed up of the normal, plain saloons, but will not accept any loss of functionality, the coupé drivers, who do not understand why design and dynamics should not be functional and comfortable.-S417_002The self-study programme shows the design and function of new developments. The contents will not be updated.For current testing, adjustment and repair instructions, refer to the relevant service literature.NEWImportant Note2 ContentsIn Brief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Occupant Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Convenience Electrics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Radio, Telephone and Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Heating and Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 663 In BriefThe Passat CC 2009●Front windscreen with acoustic enhancement●Active climatised seat with integrated ventilation for driver and front passenger●Multi-function steering wheel (MFW)●New RCD 310 module radio generation●Lane Assist●Media Device Interface box (MDI)●DCC adaptive chassis control4 ●Tilting panorama sunroof●Pivoted badge with mounting for reversing camera●Optical park assist (OPS)S417_086●Mobility tyres●Frameless doors and windows●UMPP Low telephone preparation with audio streaming5 In BriefTechnical dataExterior dimensions and weightsS417_0669812710 4796110514221553 1856 S417_0681557 S417_070Exterior dimensionsLength Width Height Wheelbase Track width at front Track width at rear 4796mm 1856mm 1422mm 2710mm 1553mm 1557mmWeights/further dataKerb weight without driver Tank capacity Drag coefficient 1430kg 70l (4MOTION 68l) 0.297cw6 Interior dimensions949 930375 82514522 S417_090Interior dimensions and volumesInterior length Boot volume max. 1790mm 535l Front headroom Rear headroom Front elbow room Rear elbow room 949mm 930mm 1422mm 1389mm7 BodyBody structureThe body structure of the Passat CC is based on the body of the 2006 Passat saloon. Compared with the saloon, the Passat CC with its typical coupé design is a few centimetres shorter, wider and longer. The roof stretches in a shallow radius from the A-pillar far beyond the C-pillar. The body structure has been modified for this reason. The following are new parts: the top left and right longitudinal members the window cross members the rear panel the A-pillar reinforcement8 The Passat CC sees the use of high to ultra-highstrength thermoformed steel panels continue. Using ultra-high-strength thermoformed steel panels allows the body weight to be reduced without losing strength.The distribution of steel sheet qualities in the Passat CC are identical to that in the Passat saloon. The pie chart shows the substantial proportion of higher strength and ultra-high-strength thermoformed steel panels as percentages.Sheet quality distribution16%19%S417_05813% 27% 25%S417_108Legend Steel panels up to 140MPa High-strength steel panels from 180 to 240MPa Higher-strength steel panels from 260 to 320MPa Ultra-high-strength steel panels from 340 to 700MPa Ultra-high-strength, thermoformed steel panels over 1000MPa9 BodyNew body featuresTilting panorama sunroofThe optional tilting panorama sunroof consists of a large glass roof and a roof control unit to operate it. The large glass roof is a single-piece glass lid driven by an electric motor. The roof controls are in a module mounted in the car headliner. Tinted glass and a fabric blind ensure a pleasant climate and good protection from the sun.S417_062Module constructionThe tilting panorama sunroof is assembled as a top-load system. This means a roof module is fitted or cemented to the body-in-white from above. This allows the glass areas to span a large section of the roof creating a fully glazed look. The fully pre-assembled module with glass lid, blind system, guide rails, mechanism, mounting frame, electric motor drive and sealing system makes assembly easier and reduces the manufacturing costs. The mounting frame, which holds the whole system and guarantees vehicle stiffness, is made from fibreglass reinforced plastic. The front area of the roof between the front windscreen and the glass lid of the tilting panorama roof was integrated in the module and is gloss black. The tilting panorama sunroof thus seems to extend the front window visually to behind the B-pillar and also contributes to the coupé-like looks of the Passat CC.Adhesive bead Roof moduleS417_060The sealing system of the module also guarantees water drainage to the outside. A separate water drainage system using cost intensive drainage hoses that are laid internally is not required.10 OperationThe tilting panorama sunroof can be raised up to four centimetres. The tilting panorama sunroof is operated using the two tilt position buttons that are operated by pulling or pushing the roof control. The buttons are connected directly to the tilting panorama sunroof control unit.S417_126Tap mode The tilting panorama roof is automatically moved to the tilt position or zero position. The automatic run can be cancelled by pressing or pulling the button.Hold mode The tilting panorama sunroof is opened or closed manually for the duration that the button is operated.Sun blindThe manual sunshade system on the tilting panorama sunroof is a complete and complex development compared to conventional sunshade systems: An opaque blind fabric is used to increase the level of shade. The blind system is infinitely variable regardless of the opening position and has an additional front blind latch. The blind system has steel tape guides at the side to ensure that the fabric is tensioned. The blind roller has been carefully adapted, i.e. it is arched crossways to ensure the necessary headroom.S417_150-11 BodyFrameless doorsThe four doors are frameless. This allowed the roof to be lowered to create the coupé-like silhouette of the Passat CC.S417_102The door window fits into a 3-lip door-frame seal. The door window first needs to be lowered out of the seal before the door can be opened. Therefore, whenever you open a door, the glass is lowered slightly. This function in the Passat CC window regulator system is extremely fast. This is achieved, among other things, with an additional microswitch in the outside door handle. The procedure is started as soon as you pull the door handle.Cross-section through the roof frame sealRoof frame seal S417_114 Door windowDoor handle mountingS417_178 MicroswitchS417_15112 Adjustment of the door windowsTo ensure a perfect seal when the doors are closed, the longitudinal direction, tilt and height of the door windows all need to be set properly. These adjustments can only be made when the vehicle is standing on all four wheels.Adjusting the height of the front door windowEntry depth at A-pillar2.4mm +/-1mm 7mm +/-1mmEntry depth at B-pillar0.6mm +/-1mm 9mm +/-1mmS417_098S417_094S417_100S417_096The height of the front door window needs to be adjusted if the entry depth of the window in the area of the A-pillar and in the area of the B-pillar does not coincide with the set values and the window edge does not run parallel to the B-pillar panel.Door window S417_116Before adjusting the height, the door window needs to be lowered completely and the plugs removed. Now you can insert the tool (ratchet) into the adjustment spindle through the adjustment openings on the left and right. Turning clockwise moves the window downwards and turning anti-clockwise moves it upwards. One rotation corresponds with 1 millimetre. After adjustment, fit the plugs again and raise the door window.Adjustment spindlePlugRatchet13 BodyAdjusting the tilt of the front door windowIf the tilt of the window at the B-pillar does not coincide with the set value, the door window needs to be adjusted at the rear. The tilt is adjusted first at the bottom and then at the top. The respective settings can only be made once the respective plug has been removed from the adjustment opening and the nut has been loosened. Following the adjustment, the nut needs to be tightened and the plug fitted again.Tilt of the window in the area of the B-pillarS417_1186.3mm +/-1mmS417_094S417_128Adjustment of tilt at top: The setting can be made by turning the tool left or right in the adjustment spindle. One rotation corresponds with 1.25 millimetres. Adjustment of tilt at bottom: If you do not know to which position the adjustment spindle is set, first turn the bolt clockwise as far as it will go. The adjustment from the end position is then made with a maximum of 10 turns anti-clockwise. The construction position is approx. 3 turns anti-clockwise from the end position.RatchetPlugAdjustment of tilt at top Bolt Adjustment of tilt at bottom Nut Plug14 Adjusting the height of the rear door windowEntry depth at B-pillar0.2mm +/-1mm 9mm +/-1mmEntry depth at C-pillar0.2mm +/-1mm 9mm +/-1mmS417_100 S417_132 S417_134S417_096The height of the rear door window needs to be adjusted if the entry depth of the window in the area of the B-pillar and in the area of the C-pillar does not coincide with the set values and the window edge does not run parallel to the B-pillar panel. The height of the rear door window is adjusted in the same way as the height of the front door window.Adjusting the tilt of the rear door windowTilt of the window in the area of the B-pillarS417_1186.1mm +/-1mmS417_132If the tilt of the window at the B-pillar does not coincide with the set value, the tilt of the rear door window needs to be adjusted. Here too, the tilt is adjusted first at the bottom and then at the top. The tilt of the rear door window is adjusted in the same way as the tilt of the front door window.15 BodyAdjusting the height and the tilt of the rear window pillarPosition of window pillar4mm +/-1mm6mm +/-1mm4mm +/-1.5mm 6mm +/-1mmS417_136 S417_140 S417_142 S417_138If the position of the window pillar does not coincide with the specified values, the height and tilt needs to be adjusted.Before an adjustment is made, the plug and the panelling cap need to be removed and the bolts loosened. The height is adjusted by raising or lowering the window pillar. The tilt is adjusted by pivoting the window pillar. Following the adjustment, the bolts need to be tightened and the plug or panelling cap fitted again.Window pillarBoltLoosening and tightening the boltsS417_154Adjusting the tilt Adjusting the height16 Acoustically enhanced front windscreenThe Passat CC has an acoustically enhanced front windscreen as standard. This front windscreen allows the very good aeroacoustic values for the Passat saloon to be further reduced. The total thickness of the windscreen with the acoustic enhancement is the same as the conventional front windscreen. An additional acoustic film has simply been used here.Acoustically enhanced front windscreenOuter pane (2.1mm) PVB layer (0.33mm) Acoustic PVB layer (0.1mm) PVB layer (0.33mm) S417_120 Inner pane (1.6mm)Conventional front windscreenOuter pane (2.1mm)PVB layer (0.76mm)Inner pane (1.6mm) S417_122The abbreviation PVB stands for polyvinyl butyral. PVB is a synthetic material.17 BodyInteriorFront seatsActive climatised seats with integrated ventilation for the driver and front passenger are available as an option for the Passat CC. The ventilator motors are in the seat base and backrest. The air is supplied through moulded ducts in the seat and backrest cushions. The air is then distributed across the cover and shaped foam base. The ventilation is provided using the air from the vehicle interior. The seat ventilation provides a cooling effect depending on the temperature. The system is controlled by a switch that is located immediately next to the seat adjustment controls. You can set three ventilation levels (low, medium and high) individually. Parallel to the seat ventilation, you can also switch the seat heating on whenever necessary. The active climatised seat is an electrically adjusted 6- or 12-way seat on the driver’s side and, on the passenger’s side, a manually adjusted seat or electrically adjusted 12-way seat.Air ductsVentilator motorsClimatised seat switchS417_072S417_15818 Rear seatsS417_124The rear seats in the Passat CC are a fixed full seat bench with two seats. A storage compartment has been integrated in the middle area where you cannot sit. There is a storage compartment for the first aid box in the centre armrest. A lockable through-load aperture is available as an option.S417_13019 Occupant ProtectionSafety equipmentThe Passat CC has the same equipment as the Passat saloon with airbags, belts and belt tensioners. The airbags have simply been adapted to the new vehicle contours.●driver and front passenger airbag●Front passenger airbag can be deactivated using a key switch in the glove compartment●Belt locks on driver’s and front passenger side with belt query●Belt tensioners on the front seats as standard, optional for the rear seats●Seats with belt tension limiters, front and rear●Rear side airbags, optional●2 pressure sensors for side crash detection, in the front doors20 Top TetherThe Passat CC is equipped with the Top-Tether system as standard. The Top-Tether system is used for additional child seat anchoring on the rear seat bench and is in the rear parcel shelf.S417_168S417_112S417_166●Head airbags●2 acceleration sensors in the vehicle longitudinal direction in the airbag control unit, 1 acceleration sensor in vehicle crossways direction in airbag control unit●2 acceleration sensors for side crash detection, in C-pillar area21 EnginesPassat CC 2009 engine rangeThe engine range for 2008 comprises two common-rail diesel engines delivering 103kW and 125kW as well as three petrol engines with direct injection that deliver between 118 and 220kW and are already in production for the Passat saloon, Passat R36 and Tiguan models. The engine control units are networked via the powertrain CAN and have been adapted due to new functions like, for example, Lane Assist or damper control.The 6-speed manual and 6-speed automatic that are already used in production as well as the 6- and 7speed Direct Shift Gearbox are available. For reasons of comfort, the 6-speed Direct Shift Gearbox has been modified for use with the 3.6l 220kW FSI engine. It has longer gear ratios and the 6th gear is configured as Economy.S417_104The specific engines are: the 1.8l 118kW TSI engine with 4-valve technology, the 2.0l 147kW TSI engine with 4-valve technology, the 3.6l 220kW FSI engine with 4-valve technology, the 2.0l 103kW CR TDI engine with diesel particulate filter, the 2.0l 125kW CR TDI engine with diesel particulate filter.The specific gearboxes are: the 6-speed manual gearbox 02S, the 6-speed manual gearbox 02Q, the 6-speed automatic gearbox 09G, the 7-speed Direct Shift Gearbox 0AM, the 6-speed Direct Shift Gearbox DSG 02EYou will find detailed information on the engines in the following self-study programmes: No. 360 “The 3.2 ltr. and 3.6 ltr. FSI engine”, No. 401 “1.8l TFSI 16v 118kW engine”, No. 403 “The 2.0 ltr. TDI Engine with Common Rail Injection System”. You will find detailed information on the gearboxes in the following self-study programmes: No. 308 “The Direct Shift Gearbox 02E”, No. 309 “6-speed automatic gearbox 09G/09K/09M”, No. 390 “The 7-speed Direct Shift Gearbox 0AM”.22 The 1.8l 118kW TSI engine with 4-valve technologyThe 1.8l TSI engine EA888 is a technically optimised further development of the familiar 4-cylinder engine series EA113. Proven engine components have been specially developed further. The engine has already been used in the Golf GTI.Technical features● ● ●●●●Improved pedestrian protection Considerable comfort and acoustic improvement Balancer shaft system with two shafts that are mounted in three bearings and offset vertically Reduced maintenance due to modified location of oil filter module Configuration of basic engine for a very wide performance spectrum The turbocharger pressure canister can be exchanged and adjusted.S417_034You will find further information on this engine in self-study programme 401 “1.8l TFSI 16v 118kW engine”.Technical dataEngine codes Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Fuel BZB 4-cylinder in-line engine 1798cm³ 82.5mm 84.2mm 4 9.6:1 118kW at 5000 to 6200 rpm 250Nm at 1500 to 4200 rpm Bosch Motronic MED 17.5 Super unleaded RON 95 (normal unleaded RON 91 with reduction in performance) Starter catalytic converter close to engine, main catalytic converter, a step-type Lambda probe after the starter catalytic converter EU4Torque and power diagram330 300 270 240 210 Torque [Nm] 180 150 120 90 60 30 1000 3000 5000 Engine speed [rpm] 7000 165 150 135 120 105 90 75 60 45 30 15 Power [kW]Exhaust gas treatmentS417_036Emissions standard23 EnginesThe 2.0l 147kW TSI engine with 4-valve technology and turbochargerThe 2.0l TSI engine is also part of the EA888 inline four-cylinder engine range. It is identical to the 1.8l TSI engine with only the displacement being increased.Technical features●●The larger displacement has been achieved with modified pistons, connecting rods and crankshaft. The turbocharger pressure canister can NOT be exchanged and adjusted.S417_074Technical dataTorque and power diagram330 300 270 240 210 Torque [Nm] 180 150 120 90 60 30 1000 3000 5000 Engine speed [rpm] 7000 165 150 135 120 105 90 75 60 45 30 15 S417_054 Power [kW]Engine codes Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management FuelCAWB 4-cylinder in-line engine 1984cm³ 82.5mm 92.8mm 4 9.6:1 147kW at 5100 to 6000 rpm 280Nm at 1700 to 5000 rpm Bosch Motronic MED 17.5 Super unleaded RON 95 (normal unleaded RON 91 with reduction in performance) Starter catalytic converter close to engine, main catalytic converter, a step-type Lambda probe after the starter catalytic converter EU4Exhaust gas treatmentEmissions standard24 The 3.6l/220kW FSI engine with 4-valve technologyThe 3.6l 220kW FSI engine with 4-valve technology comes from the VR engine range.Technical features● ● ● ● ● ● ●●●Outside dimensions have been kept FSI petrol direct injection Four-valve technology with roller rocker arms Internal exhaust gas recirculation Two-piece plastic variable intake manifold Lightweight crankcase made from grey cast iron Forged steel crankshaft and forged aluminium pistons Camshaft driving chain with integrated drive for high-pressure fuel and vacuum pump Continuous inlet and exhaust camshaft timing adjustmentS417_042Technical dataPower and torque development graph Type Displacement Bore Stroke V angle Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Fuel 6-cylinder VR engine 3597 cm 89 mm 96.4 mm 10.6° 4 11.4 : 1 220kW at 6600 rpm Torque [Nm] 350Nm at 2400 – 5000 rpm Motronic MED 9.1 Super Plus unleaded at RON 98 (Super unleaded at RON 95 with reduction in performance) Two three-way catalytic converters with Lambda control EU4, LEV21000 2000 3000 4000 5000 6000 280 240 200 160 120 80 40 320 160 140 120 100 80 60 40 20 3603220 400 200 180Exhaust gas treatmentEmissions standardS417_046Engine speed [rpm]Power [kW]25 EnginesThe 2.0l 103kW CR TDI engine with 4-valve technologyThe new 2.0l/103kW TDI engine with common rail injection system was used for the first time in the Tiguan. It is based on the 2.0l TDI engine with 4-valve technology and unit injector system. Technical features●●● ● ●●Common rail injection system with piezo injectors Diesel particulate filter with upstream oxidation catalytic converter Intake manifold with swirl flap adjustment Electric exhaust gas recirculation valve Adjustable turbocharger with travel feedback Low-temperature exhaust gas recirculation coolingS417_010You will find further information on this engine in self-study programme no. 403 “The 2.0ltr. TDI Engine with Common Rail Injection System”.Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management CBAB 4-cylinder in-line engine 1968cm3 81mmTorque and power diagram350120300 Torque [Nm]100 Power [kW]95.5mm 4 16.5:1 103kW at 4200 rpm 320Nm at 1750 to 2500 rpm Bosch EDC 17 (common rail fuel injection system) Diesel, in accordance with DIN EN 590 Exhaust gas recirculation, oxidation catalytic converter and diesel particulate filter EU4250 200806015040Fuel Exhaust gas treatment Emissions standard1002010002000300040005000 S417_009Engine speed [rpm]26 The 2.0l/125kW CR TDI engine with diesel particulate filterThe 2.0l 125kW CR TDI engine with diesel particulate filter corresponds, to a great extent, with the 2.0l 103kW CR TDI engine with 4-valve technology. However, it has a larger turbocharger and the software in the engine control unit has been adapted for increased performance.S417_010Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management CBBB 4-cylinder in-line engine 1968cm3 81mmTorque and power diagram350120300 Torque [Nm]100 Power [kW]95.5mm 4 16.5:1 125kW at 4200 rpm 350Nm at 1750 to 2500 rpm Bosch EDC 17 (common rail fuel injection system) Diesel, in accordance with DIN EN 590 Exhaust gas recirculation, oxidation catalytic converter and diesel particulate filter EU4250 200806015040Fuel Exhaust gas treatment Emissions standard1002010002000300040005000 S417_038Engine speed [rpm]27 EnginesEngine/gearbox combinationsPetrol engine Diesel engine 6-speed manual gearbox MQ250-6F 02S 6-speed manual gearbox MQ350-6F 02Q1.8l 118kW TSI engine with 4-valve technology2.0l 147kW TSI engine with 4-valve technology3.6l 220kW FSI engine with 4-valve technology2.0l 103kW CR TDI engine with diesel particulate filter.2.0l 125kW CR TDI engine with diesel particulate filter.28 6-speed automatic gearbox AQ250-6F 09G7-speed direct shift gearbox DQ-200-7F 0AM6-speed direct shift gearbox DQ250-6F DSG 02E front-wheel drive6-speed direct shift gearbox DQ250+ -6A DSG 02E four-wheel drive29 ChassisOverview of chassisThe chassis of the Passat CC is essentially based on the chassis of the Passat 2006. By using the modern McPherson strut front suspension, the four-link rear axle, the electromechanical steering with parallel-axis drive from the Tiguan and the electromechanical parking brake, Volkswagen is employing thoroughly tested technology. The chassis components are supplemented by standard mobility tyres and through the DCC adaptive chassis control.●Safety steering column with electrical steering column lock●Electromechanical power steering - For LHD vehicles: Electromechanical power steering with parallel axis drive - For right-hand drive vehicles: Electromechanical power steering with dual pinion●ABS/ESP from TRW, EBC 440, with trailer stabilisation●Lightweight strut front axle●DCC adaptive chassis control30 Systems that have been taken from the Passat 2006 include:● ● ●Dynamic auto release Tyre pressure monitor system, standard with V6 engine Standard tyre pressure monitor display●Four-link rear axleS417_144●Electromechanical parking brake with planetary gear●AUTO HOLD function, with memory function●Mobility tyresYou will find further information on the DCC adaptive chassis control in self-study programme no. 406 “DCC Adaptive Chassis Control”.31 ChassisDCC adaptive chassis controlWhen it comes to suspension systems, the rule is that a truly noticeable gain in sportiness always comes at the cost of comfort and vice versa. It would therefore be ideal to have a chassis that can constantly adapt itself to the road conditions and the respective needs of the driver. An electrically adjusted suspension system is required for this, however. It is available with the Passat CC, but is only standard with the V6 engine. Not just the damper recognition, but also the configuration of the electromechanical power steering is the controlled. The new system is called DCC adaptive chassis control. It has three programmes “Normal”, “Sport” and “Comfort”. These are selected using a button to the right of the gear selector. However, the fact that the driving properties are further (permanently) improved in “Normal” mode by the DCC adaptive chassis control is apparent. The suspension is constantly adapted to the road and the driving situation. The DCC adaptive chassis control also reacts to acceleration, braking and steering procedures.S417_08032 The conflict of aims between a sporty harder ride and a comfortable configuration has therefore been solved. This is noticeable for drivers and passengers due to the considerably better ride comfort also in “Normal” mode. In the “Sport” programme, however, the Passat CC becomes an agile sports car as the suspension becomes considerably harder and the steering assistance is reduced simultaneously with a more direct configuration.The “Comfort” mode is a stark contrast. In particular on bad roads and when driving slowly, the comfort is improved decisively. The suspension characteristics are now similar to those of a luxury saloon like the Phaeton.Wheel travel sensorsGateway control unit Button Electronically controlled damping control unitMapped dampersS417_078 Body movement sensors Electromechanical power steering Dash panel insert display Mapped dampersThe components of the DCC adaptive chassis control include four mapped dampers, a gateway control unit as an interface to the CAN data networks in the Passat CC, the electronically controlled damping control unit, three sensors for measuring the wheel travel and three sensors for measuring the body movement. The “Normal”, “Sport” and “Comfort” modes are displayed in the dash panel insert.You will find further information on the DCC adaptive chassis control in self-study programme no. 406 “DCC Adaptive Chassis Control”.33 ChassisMobility tyresThe Passat is fitted with special tyres from Continental. The tyre called “Conti Seal” is a mobility tyre. If foreign bodies penetrate the tread, they are enclosed by a viscous sealant. Holes up to 5mm in diameter that are left when you remove the foreign body are sealed safely. The sealing function lasts the life of the tyre. The otherwise conventional tyres are given a locally firm, highly viscous polymer layer inside the tyre around the tread in an additional production step.Unlike other mobility solutions, for example, run-flat tyres with reinforced walls (SST, Self Support Tire) or asymmetric rim systems (PAX), the mobility tyre does not have any concept-related disadvantages like increased rolling resistance, acoustic and mechanical comfort effects or poor uniformity.S417_052S417_082S417_084 Foreign body Highly viscous polymer layer34 Convenience ElectricsReversing camera systemThe reversing camera system supports the driver while reversing by showing the driver the traffic situation behind the vehicle on a screen. The reversing camera system consists of the following components: reversing camera, reversing camera system control unit and display screen (e.g. radio or radio/navigation system with reversing camera input).DesignJ772Video signal Video signalR189J519Display on respective radio or radio/ navigation systemJ533Convenience CAN data busJ527Infotainment CAN data busG85Legend G85 J519 J527 J533 J772 R189 Steering angle sender Onboard supply control unit Steering column electronics control unit Data bus diagnostic interface Reversing camera system control unit Reversing cameraS417_19335 Convenience electricsReversing cameraTwo familiar systems have been combined on the Passat CC in a very compact area. The pivoted badge that is used to open the boot lid manually is also the mount for the reversing camera. The camera is well protected from rain, dirt and the elements behind a protective flap inside the pivoting badge while reverse gear is not selected. When you select reverse gear, the camera swings out electromechanically, the protective flap and the badge fold out and the camera covers the area behind the vehicle with its wide-angle lens. The boot lid cannot be opened while the reversing camera is extended. This is prevented by the “open boot lid” switch signal being suppressed by the camera electronics so that it is not forwarded to the convenience control unit. If you still want to open the boot despite the camera being extended, you have to do so manually using the button in the driver’s door. When you deselect reverse gear, the reversing camera will fold back in after 9 seconds. The picture is also still displayed on the screen during this time. If a different menu is required before the end of these 9 seconds, you can switch the screen over on the respective radio or radio/navigation system.S417_09236 Reversing camera system control unit“Park box” modeThe reversing camera system control unit has the task of processing the images supplied by the camera and preparing them for output on the display screen of your radio or radio/navigation system. This includes rectifying the supplied image and adding the static and dynamic helper lines that depict the vehicle with and without steering wheel turn. Two parking modes are available for the Passat CC: S417_242for reverse parking in “park box” mode for parallel parking in “parallel” mode“Parallel” modeThe mode should be selected using the buttons on the corresponding radio or radio/navigation system before you start the parking procedure.S417_244You will find further information on the design and function of the reversing camera system in self-study programme. 407 “The Reversing Camera System”.37 Convenience ElectricsLane assistS417_999Lane Assist is another driver-assistance system like, the ACC adaptive cruise control or Front Assist (for shortening braking distance 2). The Lane Assist system has the task of automatically correcting the steering via the drive for the electromechanical power steering if the vehicle is in danger of leaving the lane. The Lane Assist system monitors the road ahead of the vehicle with the aid of a greyscale camera. If the road has recognisable lane markings or if the contrast between the road and roadside as well as the centre marking is strong enough, the Lane Assist system will calculate a virtual lane taking safety aspects into account.If the vehicle seems to be leaving this virtual lane, there is an automatic steering correction. A maximum steering moment of up to 3Nm is applied. If this is not sufficient or the correction intervention takes too long, the driver is warned about the situation by a vibration, among other things, and is asked to take over the steering.You will find detailed information on the function and operation of the Lane Assist system in self-study programme no. 418 “Lane Assist”.38 Components and operation The greyscale camera in the Lane Assist control unit is the centrepiece of the Lane Assist system. Other system components are the Lane Assist warning lamp and the field of vision heating for Lane Assist. The warning lamp indicates the operating mode of the Lane Assist system. The field of vision heating for Lane Assist ensures that the area of the windscreen in the camera image does not fog up or become covered with condensation. This ensures that the camera can see the road ahead properly. The Lane Assist can be switched on and off with the button for driver assistance systems on the front of the turn signal lever. If the Lane Assist system recognises clear road boundaries within its system limits, the system switches to the active operating mode in which steering correction can be performed. If road markings cannot be detected or other operating conditions are not fulfilled, the Lane Assist system will switch to passive mode. Now there will be no steering correction or warning, the system will, however, continue to monitor the road and immediately switch back to active mode once the conditions for this have been met, i.e. a clear lane can be recognised among other things.Control unit for Lane Assist with integrated cameraS417_997Field of vision heating for Lane AssistWarning lamp for Lane AssistLane Assist switched offLane Assist switched on and in active modeLane Assist switched on and in passive modeS417_99839 Convenience ElectricsMultifunction steering wheelA new multifunction steering wheel is being used in the Passat CC. The familiar horn button and the integrated driver airbag unit are located in the centre of the multifunction steering wheel. There are now 6 instead of 4 multifunction buttons to the left and right. This increases the user-friendliness. The back function can be used directly with a new button. The new multifunction steering wheel has 12 multifunction buttons. These buttons are used to operate among other things: the radio or navigation unit, the telephone and the cruise control systemS417_146There are two more controls on the back of the multifunction steering wheel in the form of paddles. If the car has an automatic or DSG gearbox, these buttons can be used to select the gear.E439 E440E438 E441J453 LIN LIN F350 The electrical connection between the steering wheel electronics and the onboard supply is formed by a coil connector in the steering wheel. Data is transferred between the two components via the LIN data bus. J527Legend E438 E439 E440 E441 F350 J453 J527 Tiptronic switch in steering wheel to shift up Tiptronic switch in steering wheel to shift down Multifunction buttons on left in steering wheel Multifunction buttons on right in steering wheel Coil connector Multifunction steering wheel control unit Steering column electronics control unitConvenience CAN data busS417_25240 Button assignmentButtons on leftShift down gear Increase volume TelephoneSwitch back through stationsSwitch forward through stationsDecrease volumeSpeech control/ mute S417_248Buttons on rightShift up gear and return to automatic modeConfirm Menu up Main menu backwards Main menu forwardsMenu downBackS417_25041 Convenience ElectricsOptical parking systemThe optical parking system (OPS) is being used for first time in the Passat CC. It is a software expansion for the parking aid. The park distance control system uses ultrasound sensors and an acoustic warning to help the driver judge the distance from other parked cars or obstacles. Only the warning from the sensor closest to the obstacle is supplied. The optical parking system does not only generally detect obstacles in front of or behind the vehicle, but also its position in the scanning area. Now the driver is supported not only acoustically, but also optically. During the parking manoeuvre, OPS displays a diagram of the vehicle on the radio or navigation system screen that is surrounded by coloured areas. These coloured areas show the exact position and distance from obstacles for the driver. The OPS allows a low-cost graphic display to be provided without discrete display elements (e.g. LED bar). The driver can quickly detect the position of the obstacles and navigate more precisely. The picture is switched off above 15km/h.S417_179S417_18142 Function The optical parking system is activated using the parking aid button or by selecting reverse gear. Using the four ultrasound sensors that are located at the front and rear, the distance from an object in front of and behind the vehicle is determined by the parking aid control unit. If the vehicle reaches a specific distance from this object, there is an acoustic warning from the rear parking aid warning buzzer. OPS is achieved by the parking aid control unit evaluating the distance information according to sector and transferring it to the screen. The BAP operating and display protocol is used on the CAN bus for this. The received data is converted into a graphical display in the BAP-compatible RCD 310/510 radio or RNS 510 navigation system.G203Powertrain CAN data busInfotainment CAN data bus Display on respective radio or radio/navigation systemG206 G203J533 G252S417_182G255E266Legend E266 G203 G206 G252 G255 H15 J446 J533 Parking aid button Rear left parking aid sender Rear right parking aid sender Front right parking aid sender Front left parking aid sender Parking aid warning buzzer Parking aid control unit Data bus diagnostic interfaceH1543 Radio, Navigation and TelephoneThe radio systems in the Passat CC 2009The RCD 310 and RCD 510 radio systems as well as the RNS 300 and RNS 510 radio navigation systems are available for the Passat CC.RCD 310 radio●● ●● ●● ● ● ●● ● ●● ● ●FSTN monochrome display, (FSTN=Film-Super-Twisted-Nematic, i.e. liquidcrystal display) Twin tuner with phase diversity Integrated DAB tuner (digital radio) (depending on equipment) Integrated CD drive Media support for MP3 and WMA audio data (with ID3-Tag) Optical parking system (OPS) Climate control information RDS FM/AM Europe radio Two or four loudspeakers with up to 20 Watt output can be connected GALA speed-dependent volume control Self-diagnosis and loudspeaker diagnosis TP button; stations that do not broadcast TP information will be displayed with “No TP”. CAN BAP operating and display protocol Convenience codingS417_218S417_184 Button assignment for version with DABCombination and expansion possibilities● ●● ●● ● ●Universal mobile phone preparation Support of display on dash panel insert via the BAP operating and display protocol as well as the DDP display data protocol External amplifier can be controlled Control via multifunction steering wheel (MFW) and multifunction display (MFD) External CD changer (without MP3 support) Audio input interface (AUX-IN) Media Device Interface (MDI)The ID3 tag is additional information that can be contained in MP3 audio files. ID3 stands for “Identify an MP3”. “Tag” is simply a label attached to the file. MP3 files can, but do not have to contain ID3 tags. The ID3 tag is part of the MP3 file. The most important content of the ID3 tag is the artist, the name of the album and the name of the music track.44 RCD 510 radio●● ● ● ●● ●S417_210●Combination and expansion possibilities● ●●● ● ● ● ●External sound amplifier Support of display on dash panel insert via the BAP operating and display protocol as well as the DDP display data protocol Universal mobile phone preparation Compatible, external telematics units Control via multifunction steering wheel External CD changer (without MP3 support) Media Device Interface (MDI)●● ● ●● ●●Touch-sensitive 6.5" TFT colour screen with a resolution of 400 x 240 pixels Twin-tuner for FM, TP and RDS reception Integrated aerial diversity for two aerials AM reception Two or four loudspeakers with up to 20 Watt output can be connected Integrated 6-CD changer Integrated memory for TIM information (depending on equipment) Integrated DAB tuner (digital radio) (depending on equipment) SDARS tuner (SAT radio) (depending on equipment) Integrated SD memory card reader (SD=Secure Digital) Media support for MP3 and WMA audio data Audio input interface (AUX-IN) Interface for connecting a reversing camera in the radio unit version RCD 510 RVC (Rear View Camera) Self-diagnosis and loudspeaker diagnosis Display of climate control conditions (information displayed temporarily) Optical parking system (OPS)45 Radio, Navigation and TelephoneRNS 300 radio/navigation system● ●● ● ● ●●●● ● ● ●5" monochrome display Two or four loudspeakers with up to 20 Watt output can be connected RDS FM/AM Europe radio FM single tuner with an aerial Integrated CD drive (MP3-compatible) Display of navigation symbols on dash panel insert (only on Highline version of dash panel insert control unit) Route guidance using symbols and speech Navigation without inserted navigation CD (corridor function) Dynamic guidance with TMC CD navigation Media support for MP3 BAP operating and display protocolS417_216Combination and expansion possibilities● ●●●●Universal mobile phone preparation Support of display on dash panel insert via the BAP operating and display protocol as well as the DDP display data protocol Optionally combinable with multifunction steering wheel Optionally combinable with external CD changer (CDC) Media Device Interface (MDI)You will find detailed information on the RNS 300 radio/navigation system in self-study programme no. 397 “2007 Radio/Navigation Systems”.46 RNS 510 radio/navigation system●●● ● ●● ●S417_214Combination and expansion possibilities● ●●●●●●●● ●Controllable via multifunction steering wheel Support of display on dash panel insert via the BAP operating and display protocol as well as the DDP display data protocol Optionally combinable with Volkswagen sound and Dynaudio as well as Volkswagen TV tuner Display of navigation symbols by the dash panel insert control unit (Highline) Video or TV playback from external sources, e.g. DVD player, reversing camera Transfer of video signals for external display units, e.g. rear-seat entertainment (RSE) Audio playback of external sources like, e.g. CD players, iPods Universal mobile phone preparation Media Device Interface (MDI)● ●●●●● ●●●Touch-sensitive 6.5" multi-colour display (MFD) with a resolution of 800 x 480 pixels Two or four loudspeakers with up to 20 Watt output can be connected RDS, FM and AM Europe radio FM twin tuner with two aerials Integrated DAB tuner (digital radio) (depending on equipment) SDARS tuner (depending on equipment) Integrated DVD drive for navigation, audio and video Integrated drive hard for storing navigation and audio data Integrated SD memory card reader Media support for MP3 and WMA audio and video data Map display in 2D, 3D bird’s eye view and topographical view Navigation function with map, split screen and speech TMC function (the current traffic messages are stored), dynamic navigation (Europe, North America) Off-road functions 3 user interfaces (styles) can be programmed, encoded depending on model at factory Display of climate control conditions (information displayed temporarily) Optical parking system (OPS)You will find detailed information on the RNS 300 radio/navigation system in self-study programme no. 397 “2007 Radio/Navigation Systems”.47 Radio, Navigation and TelephoneAerial concept in Passat CC 2009Several aerials are integrated in the rear windscreen of the Passat CC. The aerials for navigation (GPS), telephone (GSM) and auxiliary heating (FFB) are accommodated in a roof aerial. The impedance transformer (amplifier) for the AM and FM systems are mounted in the C-pillars on the left and right. The connections to the aerial amplifiers are adapted to the equipment in the vehicle. Only the connections that are actually required by the infotainment components (radio, telephone, navigation, TV, etc.) are provided on the window. The different radio tuner principles lead to different FM aerial systems being fitted in the vehicle.Aerial version without DABFM2 aerial AM aerial FM1 aerialFM2 Impedance transformerAM/FM1 Impedance transformer- Blocking circuiton heating connection+Rear windscreen heating voltage supplyS417_170-+blocking circuit is incorporated in the supply cable to the rear windscreen heating48 The minus blocking circuit is connected directly to the minus connection of the rear windscreen heating (right). The plus blocking circuit is in the supply cable of the rear windscreen heating connection (left). As the aerial structure for AM does not have a connection to the heating structure, an AM blocking circuit is not required.Aerial version with DABDiagnosis jumper DAB aerials FM2 aerial AM aerial FM1 aerial AM/FM1 impedance transformer Diagnosis jumperDAB/FM2 impedance transformer- Blocking circuit on heating connection+Rear windscreen heating voltage supplyS417_172-+blocking circuitis incorporated in the supply line to the rear windscreen heating49 Radio, Navigation and TelephoneMedia Device Interface boxThe media device interface, or MDI for short, allows passengers in the Passat CC to connect their mobile audio or multimedia devices, e.g. iPod, MP3 players or USB sticks, to the infotainment system and display, select and play the audio content over the vehicle speaker system or the infotainment monitors.MDI control unit MDI boxLocationThe MDI control unit is accommodated in a plastic case of the MDI box. The MDI box has a safe and anti-slip facility for you to place the mobile multimedia device and is single DIN size. The MDI box is fitted in space for the CD changer. Thus, only one device can be fitted at any one time in the Passat CC.S417_224 Adapter connection Storage compartmentS417_226 MDI box MDI control unit50 Connection possibilitiesThe mobile device is connected depending on the type with a special adapter cable that is optionally connected to the central interface, the adapter connection. The following audio formats are currently supported and can thus be played back: MP3, WMA and OGG Vorbis (license-free audio data compression Codec). The AAC format that is also supported is a licensed format from Apple.Connection possibilities with USB adapter cable USB sticks, MP3 player and USB hard drives can be connected via the USB adapter cable.S417_222Connection possibilities with mini USB adapter cable MP3 players, telephone/communicators and MiniUSB hard drives can be connected via the mini USB adapter cable.S417_230Connection possibilities with adapter cable for iPod Different iPods can be connected via the adapter cable for iPod. On the display unit, which has to support the operating and display protocol (BAP), the same audio playback lists are shown as on the iPod.S417_22851 Radio, Navigation and TelephoneTask The media device interface is an interface control unit for connecting a wide range of media devices to the vehicle’s infotainment network. As an interface control unit, the MDI has to ensure that the media unit is adapted to the vehicle infotainment system both on the physical side (connector compatibility) and also by the software. Furthermore the infotainment system has to be informed by the MDI that a new data memory is available from which music, for example, can be read and played back. Finally the MDI should allow the recognised unit to be controlled via the radio or radio/navigation system.RCD/RNSLF+12V EarthMDI boxIf only the AUX-IN socket is fitted in the vehicle, it is connected directly to the AUX input of the fitted RCD/RNS radio or navigation system. If the vehicle also has a Media-Device-Interface, the optional AUX-IN socket is connected to the MDI box as the AUX input of the radio is already occupied by the MDI.52 How it works The MDI box is connected to the vehicle data network via the infotainment CAN data bus and is connected directly to the 12-volt power supply. The connected media devices are thus also loaded automatically.Multifunction steering wheelThe adapter connection and an additional external audio input (AUX-IN) serve as inputs. Using the MDI requires a display device with operating and display protocol (BAP) as it can only be controlled with this via the CAN bus. The MDI itself does not have a control facility. BAP-compatible devices are currently the RDC 510 and RCD 310 as well as the RNS 510. To tackle the many tasks, the MDI box has a range of internal software and hardware modules. In addition to a diagnosis and a CAN data bus interface to the vehicle system, the MDI has a separate decoding module for the MP3, WMA, OGG and AAC (Apple) audio formats. The MDI also has a control module to recognise the provided data, interpret the control signals for the connected devices like iPod or MP3 player and translate them for the infotainment controls like, for example, the touch screen of the RCD 510 and RNS 510.LFS417_241External AUX-IN socketInfotainment CAN data bus Low-frequency audio connectionOn this user interface, the user can then navigate through the folders or playlists.53 Radio, Navigation and TelephoneUniversal mobile phone preparationTwo telephone preparations are available for the Passat CC: The UMPP Premium with BluetoothTM as used in the 2006 Passat estate and the UMPP Low with audio streaming that is being used for the first time in the Passat CC.Premium phone preparation with BluetoothTMJ453Functions●J440J441●●● ●●●●● ●Operation via the multifunction steering wheel and the keypad on the instrument panel Display of telephone information on the Highline dash panel insert Telephone data transfer and mobile link via BluetoothTM transfer Hands-free system and audio mute GSM aerial directly on universal preparation amplifier module SIM data incl. telephone book available in universal mobile phone preparation Separate button module for information and breakdown calls The phone holder can be connected for charging purposes Follow-up time can be set to up to 60 minutes Self-diagnosisJ285 J527J533J738S417_253You will find further information on the premium phone preparation with BluetoothTM in self-study programme no. 356 “The Passat Estate 2006”. You will find more detailed information on the universal telephone preparation in self-study programme no. 345 “Universal Telephone Preparation”.54 Essential technical and functional features:●●●Wireless phone integration You can leave your phone in your jacket pocket. The mobile phone itself does not transmit via GSM in the car. Only BluetoothTM remains active Greater reception and transmission power due to separate GSM module in universal telephone preparation control unit.●●No separate SIM card (twin card) needed for universal telephone preparation operation. The mobile phone needs to be programmed to use the phone system control unit before you use the system for the first time (BluetoothTM pairing).J503 R65E275/E276J412 GSM/GPRS moduleCharging holder for specific mobile phoneMicrocontrollerCAN controller Audio R38 Terminal 30 Terminal 31 Voltage supply Telephone bracket R126 Legend E275 E276 E440E441 J285 J412 J453 J503 J527 J533 J738 R38 R65 R126 Breakdown assistance call button Emergency assistance call button Multifunction buttons on left in steering wheel Multifunction buttons on right in steering wheel Control unit in dash panel insert Mobile telephone operating electronics control unit Multifunction steering wheel control unit Control unit with display for radio and navigation Steering column electronics control unit Data bus diagnostic interface Telephone controls control unit Telephone microphone Telephone aerial Telephone bracket Audio module BluetoothTM module RSAP mobile phoneCAN data bus LIN data bus Serial cable Optional BluetoothTM55 Radio, Navigation and TelephoneUMPP Low (Bluetooth only) with audio streamingBluetoothTM technology is used to connect mobile phones to the vehicle hands-free system. Two Bluetooth profiles are used for UMPP Low with audio streaming:●HFP stands for Hands-Free Profile and is a Bluetooth profile for the telephone audio/speech channel. Pure speech data is transferred here. Transfer of music data is now also possible using the new Bluetooth profile A2DP audio streaming. A2DP stands for Advanced Audio Distribution Profile and is a special Bluetooth profile, just like rSAP on the UMPP Premium, that is not part of the standard Bluetooth connection. The A2DP profile allows music files to be transferred unidirectionally to the UMPP control unit via a stereo audio stream. Considerably higher data quantities are transferred than with pure speech data.●Legend J412 J503 R38 R54 Mobile telephone operating electronics control unit Control unit with display for radio and navigation Telephone microphone Mobile telephoneJ503RCD 310 RCD 510 RNS 510R38 Terminal 30 Terminal 31Mobile phones are always connected to the VW UMPP via Bluetooth. The mobile phone and the UMPP control unit therefore need to be paired with each other before being used for the first time.56 Functions● ● ● ●● ●● ●The operation and display is on the mobile phone. It has a hands-free system and radio mute switching. The phone is charged via the phone holder. The info and breakdown buttons are located on the mobile phone holder. These signals are transferred via a discreet cable connection. There is a CAN data bus interface to the Infotainment CAN data bus. Data is transferred between the mobile telephone and the mobile telephone operating electronics control unit via BluetoothTM. This UMPP is diagnosis compatible. The follow-up time can be set (max. 60 minutes).J412 R54 DSPInfotainment CAN data busµC MemoryCAN controllerPure speech data via HFPStereo channels Audio module Voltage supply S417_236 For music dataA2DPTelephone holderYou will find more detailed information on the universal telephone preparation in self-study programme no. 345 “Universal Telephone Preparation”.A new telephone holder is required to charge Nokia telephones in the Passat CC.57 Heating and Air ConditioningAir conditioningS417_159Two different types of air-conditioning system are fitted in the Passat CC that have also already been used in the Passat 2006:● ●The semi-automatic heater and air conditioner “Climatic” The fully automatic “2C-Climatronic” heating and air-conditioning systemOperationNew controls are being used for the first time that come in different versions depending on the equipment fitted:● ● ●with and without instant heating button for auxiliary coolant heating with and without button for seat heating with or without button for heated windscreenYou will find further information on the air-conditioning systems in self-study programme no. 318 “The 2004 Golf ” and in self-study programme no. 339 “The Passat 2006”.58 ClimaticControlsRear windscreen heating AC button Feedback LED Instant heating button for auxiliary coolant heating Recirculation buttonElectronic rotary knob for air distributionButton for seat heating leftS417_161 Electronic temperature rotary knobButton for seat heating rightAir-conditioning unitAir distribution flapsCurve disc rightThe flaps for air distribution are no longer adjusted via a flexible shaft, but via an electrically operated control motor.S417_163 Control motor Curve disc left59 Heating and Air ConditioningClimatronicControlsElectronic temperature rotary knob for driver’s side S417_165 AUTO button with two fan modes Feedback LED for fan speedElectronic temperature rotary knob for front passenger’s sideAutomatic fresh air controlYou can choose between the two modes AUTO High and AUTO Low for the automatic fresh air fan control. In these modes, not only the fan power is automatically controlled, but also the air distribution and temperature. You switch between the modes by pressing the AUTO button. In the AUTO setting (= automatic mode), the air-conditioning control unit regulates the interior temperature to the required level using the received information quickly and easily and keeps it constant even when outside conditions change.AUTO High The AUTO High mode is an automatic mode with greater quantities of air. The target temperature is reached as quickly as possible. AUTO High is configured especially for a high risk of misting (high inside and/or outside humidity) and for ideal ventilation of the rear area. The right-hand LED in the AUTO button is illuminated in AUTO High mode. The fresh air fan runs in the standard characteristic curve.AUTO Low The AUTO Low mode is an automatic mode with smaller quantities of air. The Climatronic gently regulates the preset interior temperature giving priority to acoustic comfort. The left-hand LED in the AUTO button is illuminated in AUTO Low mode. The fresh-air fan speed in AUTO Low mode is always one level lower than in AUTO High mode.60 In automatic mode, the Climatronic system automatically adjusts the control motors for the air-distribution flaps of the air-conditioning/ heating system. The air flowing from the air-conditioning unit has the set temperature and is conducted towards the windscreen, footwell or air vents. The quantity of air is controlled steplessly via the fan speed depending on how much air is required to reach or maintain the comfortable temperature. The temperature of the air entering the vehicle is also continuously measured by the Climatronic system. By setting the target value on the two temperature rotary knobs, the occupants specify the level of the interior temperature to be set, everything else is controlled automatically by the Climatronic system.Status displayDisplay on RCD310The LEDs in the control indicate that the respective function is activated.S417_174Display on RCD510, RNS310 and RNS510The radio or radio/navigation screen also shows information on the Climatronic system. For example, the temperature appears as a pop-up when you adjust the temperature.S417_17661 Electrical SystemFuse boxes and relay locations in the onboard supplyLocationsThe battery is located on the left of the engine compartment or on the left of the boot depending on the equipment version.Fuse and relay box, left of engine compartmentBack-up fuse box on left of engine compartmentS417_014Additional relay carrier under the fuse and relay box62 Relay carrier on left under dash panel, above onboard supply control unitRelay carrier on onboard supply control unit, on left under dash panelFuse box, on left in dash panelRelay carrier, on left under dash panel63 Electrical SystemNetworking conceptThe data bus diagnostic interface J533 forms the interface for communication between the following data bus systems: Powertrain CAN data bus Convenience CAN data bus Infotainment CAN data bus Combi CAN data bus Diagnostics CAN data bus J285 The following data bus systems are connected downstream of a CAN data bus system as subbus systems: a LIN data buses Sensor CAN data bus Cornering light CAN data bus Lane change assist CAN data bus Serial data bus J428 T16 J788 J623 b J745 J770 c J769J667J668J533J245J503 RJ345R78J519J525Legend Powertrain CAN data bus Convenience CAN data bus Infotainment CAN data bus Sensor CAN data busJ386J388J364J387J389a b cCombi CAN data bus Diagnostics CAN data bus Lane change assist CAN data bus Cornering light CAN data bus LIN data bus CAN data bus line LIN data bus line Communications line Serial data bus cableR190***R215J772G19764 G419 J540J217**J743J446 J791J104J492J500J250J759J527 J234 E221 E415 G85J255J604J136***G397J400J393J764H8G273/G384Legend E221 Operating unit in steering wheel (multifunction steering wheel) E415 Entry and start authorisation switch G85 Steering angle sender G197 Magnetic field sender for compass G273 Interior monitoring sensor G384 Vehicle inclination sender G397 Rain and light sensor G419 ESP sensor unit H8 Anti-theft alarm system horn J104 ABS control unit J136*** Seat and steering column adjustment control unit with memory function J217** Automatic gearbox control unit J234 Airbag control unit J245 Sliding sunroof adjustment control unit J250 Electronically controlled damping control unit J255 Climatronic control unit J285 Control unit in dash panel insert J345 Trailer detector control unit J364 Auxiliary heater control unit J386 Driver door control unit J387 Front passenger door control unit J388 Rear left door control unit J389 Rear right door control unit J393 Convenience system central control unit J400 Wiper motor control unit J412 Mobile telephone operating electronics control unit J428 Adaptive cruise control unit J446 Parking aid control unit J492 Four-wheel drive control unit J500 Power steering control unit J503 Control unit with display for radio and navigation J519 Onboard supply control unit J525 Digital sound package control unit J527 Steering column electronics control unit J533 Data bus diagnostic interface J540 Electromechanical parking brake control unit J604 Auxiliary air heater control unit J623 Engine control unit J667 Power output module for left headlight J668 Power output module for right headlight J738 Telephone controls control unit J743 Mechatronic unit for direct shift gearbox J745 Cornering light and headlight range control unit J759 Lane departure warning control unit J764 Electronic steering column lock control unit J769 Lane change assist control unit J770 Lane change assist control unit 2 J772 Reversing camera system control unit J788 Cut-off relay for CAN powertrain bus J791 Control unit for parallel parking assist R Radio R78* TV tuner R190 Digital radio satellite receiver*** R215 Interface for external multimedia devices T16 Diagnosis connectorJ412J738S417_011* Only Japan ** With automatic gearbox only ***Only North American region (NAR)65 GlossaryAM Amplitude modulation, electromagnetic wave used to transmit messages. In amplitude modulation, the amplitude of the high frequency is varied. MP3 Motion Pictures expert group layer 3 (MPEG Layer 3) Compression standards for video, audio and image formats.NAR BAP North American Region The BAP operating and display protocol is used for communication between function control units and operating and display control units. BAP specifically separates the function from the display and the control.LF Low frequencyFM RDS Frequency modulation, electromagnetic wave used to transmit messages. In frequency modulation, the frequency of the carrier wave varies in step with the information signal. The amplitude remains constant. Radio Data System Standardised system for transferring non-audio additional information for radio e.g. station names, audio titles etc.GPS Global Positioning System, a satellite system set up by the US Department of Defense that aids navigation.SD Secure Digital card Small and robust memory cards, e.g. for digital photo, MP3 players etc.SDARS GSM Global System for Mobile communications Standard for digital mobile telecommunications networks that is also used for data transfer as well as text messages (SMS). Satellite Digital Audio Radio Services A digital radio standard for commercial satellite radio in North America.66 TFT Thin Film Transistor Display (TFT display = flat screen).TMC Traffic Message Channel A digital service in radio for transmission of traffic messagesUMPP Universal Mobile Phone Preparation.USB Universal Serial Bus Universal serial interface between different computers and peripheral devicesWMA Windows Media Audio Special audio format under Microsoft Windows.67 417© VOLKSWAGEN AG, Wolfsburg All rights and rights to make technical alterations reserved. 000.2812.12.20 Technical status 05/2008 Volkswagen AG Service Training VSQ-1 Brieffach 1995 38436 Wolfsburg❀This paper was manufactured from pulp that was bleached without the use of chlorine.