TECHNICAL DOCUMENTATION
SSP 444 The Polo 2010

This PDF is currently unavailable.
Read document text
Service TrainingSelf-study Programme 444The Polo 2010The new Polo, which is now the fifth generation, communicates particularly high value and quality, which, together with unlimited everyday usability and great economy, sets the benchmark in this class. The new design is shaped by a unique clarity and straightforwardness. Its form and lines convey the precision and quality for which Volkswagen stands. The ESP electronic stability programme with hill start assist will come as standard in many European countries.The combined head-thorax airbags in conjunction with the driver and front passenger airbags have been added to the standard equipment and ensure a high level of passive safety. The new turbo diesel engines using common rail technology, the TSI engines and the 7-speed dual clutch gearbox all allow dramatic cuts in consumption and emissions values across the output levels. The new Polo 2010 — high-quality and dynamic — the standard in its class.S444_005The self-study programme portrays the design and function of new developments. The contents will not be updated.For current testing, adjustment and repair instructions, refer to the relevant service literature.NEWImportant Note2ContentsIn Brief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Occupant Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Gearboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Heating and Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Radio, Telephone and Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Convenience Electrics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453In BriefThe Polo 2010 from VolkswagenThe illustration shows important standard and optional features for the basic version of the Polo. These may vary from country to country.●Combined head-thorax airbags for driver and front passenger, integrated in the front-seat backrests●Multimedia Device Interface box (MDI), optional●Multifunction display and tyre pressure monitor, optional●7-speed dual clutch gearbox, optional●Daytime running lights, optional●Fog lights and static cornering lights, optional●ESP with hill start assist4●“Climatic” and “Climatronic” air-conditioning systems, optional●Rear bench with optimised folding angle to create flat load floor●Variable load floor in two levels, optional●Tyre mobility set●Three head restraints in rear●Three 3-point automatic seat belts in rearS444_002●3-spoke steering wheel5In BriefTechnical dataExterior dimensions and weights8392470 39706611463 168214531456 S444_001Exterior dimensionsPolo 2010 Length Width Height Wheelbase Track width at front Track width at rear 3970mm 1682mm 1453mm 2470mm 1463mm 1456mm Polo 2006 3916mm 1650mm 1467mm 2466mm 1434mm 1426mmWeights/further dataPolo 2010 Maximum weight Kerb weight without driver Tank capacity Drag coefficient 1550kg* 993kg* 45l 0.32 Polo 2006 1570kg* 1018kg* 45l 0.32* 1.2l 51kW engine with MQ200, 3-door, standard equipment6Interior dimensions1674988943S444_003967280S444_004Interior dimensions and volumesPolo 2010 Interior length Boot volume Luggage compartment volume with rear seat backrest folded down 1674mm 280l 967l Polo 2006 1666 mm 270l 1030l Front headroom Rear headroom Shoulder space in front Shoulder space in rear Polo 2010 988mm 943mm 1372mm 1327mm Polo 2006 974mm 958 mm 1350 mm 1332mm7BodyBody structureS444_109High- and ultra-high-strength steels are used to meet the requirements for a stable vehicle structure. For the first time, the B-pillar on the Polo is made from die-quenched steel as it is on the Golf, for example. This has increased the strength of the passenger cell without gaining weight. The passenger cell represents the survival space for the occupants.Frontal crashThe impact cross member is made from die-quenched steel to achieve a stable connection between the front longitudinal members. As a result, both longitudinal members absorb the energy in a front collision.Pedestrian protectionDeformation elements in the area of the impact cross member ensure pedestrian protection.8Strengths of steel sheets 140 Mpa 140-300 Mpa 300-1000 Mpa 1000 MpaS444_10814Side collisionIn a side collision, the B-pillar and the doors are the most important structural components which together absorb the main load in a side collision. Die-quenched steels are used to obtain an efficient construction in terms of weight and component size. This allows the highest level of occupant protection without additional reinforcements. Being the central load distributor, the B-pillar transfers the forces acting on the sill and roof frame. The seat cross member ensures additional stability in the passenger cell by providing support against the opposite side of the vehicle. In conjunction with the doors, which are reinforced with diagonal impact members, the crash energy is reduced at an extremely high force level. In this way, both low penetration speeds and also small penetrations into the passenger compartment are achieved.84236S444_014Rear-end collisionThe rear-end crash requirements for the vehicle relate to the stability of the passenger cell and the rear-end structure. The rear-axle geometry, the shape of the tank filler neck and the position of the tank in front of the rearaxle mounting protect the fuel system in a rear-end collision.9BodyDoorsS444_113The basic door unit has been designed as a single part. Impact members are fitted in the doors.Lifting frameThe window regulator can be accessed once a plastic cover is removed.Cable drum housingS444_011Plastic coverS444_01210Front light conceptS444_125S444_118S444_119Right-hand headlight moduleRight-hand additional front light moduleThe front light concept of the Polo 2010 has two light modules on each side of the vehicle: - The headlight module and - an additional front light module in the front spoiler. The headlight module contains the turn signal, side light, dipped beam light and main beam light. The additional front light module contains the fog light and the optional daytime running light.11BodyH7 headlight moduleS444_006Main beamTurn signalDipped beamThe headlights on the Polo 2010 can be removed with the vehicle’s tool set. This is necessary as the bulbs can only be replaced when the unit is removed. H4 headlights are included in the standard equipment. An H7 headlight with separate reflectors for dipped beam and full beam is available as an option. In Comfortline and above, the H7 headlights come as standard.Functions of the H7 headlightSide lights When the side lights are on, only the side light bulb is illuminated. Dipped beam When the dipped beam is switched on, the dipped beam bulb and the side light bulb are illuminated.S444_043S444_044Main beam When the full beam is switched on, the full beam bulb, the dipped beam bulb and the side light bulb are S444_045 illuminated.12Additional front light moduleIn the additional front light module, the following lights can be fitted:● ●Fog light with optional cornering light Daytime running lightsFog light with optional cornering lightS444_120 Daytime running lightsRear lightsThe rear lights on the Polo 2010 have been designed as one unit. The tail light, brake light, turn signal, rear fog light, reversing light and reflector are integrated in this unit. The rear fog light is in the left-hand rear light and the reversing light is in the right-hand rear light. On the tail light, the light beams from a 5W bulb are aligned parallel via a reflector and diffused widthways by a vertical tubular-look pattern on the inside of the intermediate lens.Tail lightBrake lightBeam path of tail lightS444_008 Turn signal Rear fog light 5W bulbS444_142You remove the complete tail light to replace the bulbs. It is secured by a central nut on the side.13BodyInteriorS444_126The front seatsThree types of seat with form-fitting cushions are available for the new Polo depending on the equipment line. The Trendline, Comfortline and Highline variants are distinguished by the cushion contours, the seat cover materials and the stitching types and patterns. In the Comfort and Highline versions, pockets on the back of the front seats and height-adjustable front seats come as standard. Drawers under the seat base are standard in the Highline versions. An optional two-level seat heating system, which responds very quickly, can be ordered for the front seats. From Comfortline, an easy-entry system with memory function comes as standard on 2-door models.Rear seatsThe Polo 2010 has a non-split and folding rear seat bench as standard. There is an optional 40% / 60% split version. In conjunction with a variable load floor, both rear seat systems can be folded down to form a flat load floor thanks to a raised pivoting point.14Luggage compartmentA variable load floor is available as an option. The lower position allows the maximum stowage volume. The upper position creates a flat load floor including an additional facility for storing a range of items under the load floor.S444_105Storage compartment for warning vestsS444_110A fold-out compartment is provided on the passenger-side in the lower area of the A-pillar panelling for storing warning vests.S444_01515Occupant ProtectionSafety equipmentAirbag system basic equipmentS444_106The Polo 2010 comes with the following safety features as standard: Driver airbag Front-passenger airbag, which can be deactivated Combined head-thorax airbags in front Belt tensioners with belt force limiters for the front seats Three-point belts for the rear seatsCurtain airbags are an available option for the front and rear seats. If this option is chosen, conventional side airbags are fitted in the front seats and no combined head-thorax airbags.16Airbag system optional extrasS444_127In the Polo, the Seat Belt Reminder system (SBR) is used to monitor the belt lock information from the front seats as standard. The occupancy status of the front passenger seat is linked to this. If, at speeds above 25km/h, the driver’s belt lock is recognised as not engaged or the front passenger seat is occupied, but the occupant is not belted in, a warning tone and warning light is activated in the dash panel insert. The airbag trigger system consists of an airbag control unit in the front area of the frame tunnel with three internal acceleration sensors (two sensors in longitudinal direction and one in transverse direction) and four external sensors for recognising side collisions. The sensors are fitted as follows: Pressure sensors in the front doors Lateral acceleration sensors in C-pillar area17EnginesEngine and gearbox combinationsPetrol enginesEngines 1.2 l 44kW engine 1.2 l 51kW engine 1.4 l 63kW engine 1.2 l 77kW TSI engineGearbox5-speed manual gearbox MQ200-5F 02T6-speed manual gearbox MQ200-6F 02U5-speed manual gearbox MQ250-5F 02R7-speed dual clutch gearbox DQ200-7F 0AM18Diesel enginesEngines1.6 l 55kW diesel engine1.6 l 66kW diesel engine1.6 l 77kW diesel engineGearbox5-speed manual gearbox MQ200-5F 02T6-speed manual gearbox MQ200-6F 02U5-speed manual gearbox MQ250-5F 02R7-speed dual clutch gearbox DQ200-7F 0AM19Engines1.2 l 44kW/51kW engine with multi-point injectionThis 1.2 l engine in two output versions is the entrylevel engine for the new Polo. The engine mechanics are identical in both engines. The output is determined exclusively by the software.S444_033Technical featuresAir filter in wheel housing Chain-driven camshaft Split cylinder block Crankshaft drive with balancer shaft Cross-flow cooling in cylinder head Standing oil filter Non-return fuel system Crankcase breather and ventilation system Single-spark ignition coils with integrated output stageTechnical dataEngine codes Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Fuel CHFA 1198cm3 76.5mm 86.9mm 4 10.3 : 1 44kW at 5200 rpm 108Nm at 3000 rpm Simos 9 Super unleaded RON 95 (normal unleaded RON 91 with reduction in performance) Three-way catalytic converters with Lambda control EU5 10.5 : 1 51kW at 5400 rpm 112Nm at 3000 rpm CGPAPower and torque development graphNm 200 180 160 140 120 100 80 60 40 20 1000 2000 3000 4000 5000 6000 Power [kW] - 51kW Torque [Nm] - 51kW Power [kW] - 44kW Torque [Nm] - 44kW kW 90 80 70 60 50 40 30 20 10 0 1/min3-cylinder in-line engineExhaust gas treatmentS444_036Emissions standard201.4 l 63kW engine with multi-point injectionThis engine has been fitted in various models since model year 2007. The output has been increased from 59kW to 63kW.Technical featuresToothed belt pulley on crankshaft with elliptic shape to reduce toothed belt vibrations Coated toothed belt Intake pipe with modular design Crankcase breather and ventilation system with diaphragm valve to regulate pressure in cylinder blockS444_034-Pre-warming for crankcase ventilation integrated in cooling system Exhaust manifold and three-way catalytic converter are combined in one moduleTechnical dataEngine codes Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine Management Fuel CGGB 4-cylinder in-line engine 1390cm3 76.5mm 75.6mm 4 10.5 : 1 63kW at 5000 rpm 132Nm at 3800 rpm Magneti Marelli 4HV Super unleaded RON 95 (normal unleaded RON 91 with reduction in performance) Starter and main catalytic converters with Lambda control EU5Power and torque development graphNm 200 180 160 140 120 100 80 60 40 20 1000 2000 3000 4000 5000 6000 Power [kW] Torque [Nm] kW 90 80 70 60 50 40 30 20 10 0 rpmExhaust gas treatmentEmissions standardS444_03721Engines1.2 l 77kW engine with turbochargerThis engine with 4 cylinders, 2 valves and turbocharger sees Volkswagen continue its downsizing strategy.Technical featuresDiecast aluminium cylinder block with new grey cast cylinder liners Steel crankshaft with connecting rod and main bearing diameter reduced to 42mm Low-friction lightweight pistons with ring set with reduced tangential forces Oil system with reduced oil throughput and oil pump with optimised efficiency Turbocharger module with electrically operated waste gate flap control Split, service-friendly lightweight timing chain case with covers made from plastic and magnesiumS444_039-Crankcase breather and ventilation system with oil separation facility integrated in cylinder block and cylinder headYou will find further information on this engine in self-study programme no. 443 “The 1.2 l 77kW TSI Engine with Turbocharger”.Technical dataEngine codes Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Fuel Exhaust gas treatment CBZB 4-cylinder in-line engine 1197cm 71mm 75.6mm 2 10 : 1 77kW at 5000 rpm 175Nm at 1500 - 3500 rpm Simos 10 Super unleaded RON 95 Three-way catalytic converter with upstream broadband Lambda probe and downstream step-type Lambda probe EU53Power and torque development graphNm 200 180 160 140 120 100 80 60 40 20 1000 2000 3000 4000 5000 6000 Power [kW] Torque [Nm] kW 90 80 70 60 50 40 30 20 10 0 rpmEmissions standardS444_035221.6 l 55kW TDI engineThe 1.6 l TDI engine with common rail injection system and 4-valve technology is based on the 2.0 l 103kW TDI engine with common rail injection system. Thanks to continued further development of the proven technology and a new common rail injection system from Continental, this engine fulfils the EU5 emissions standard. Technical features Common rail injection system with piezo injectors and maximum injection pressure of 1600bar Adjustable turbocharger Exhaust gas recirculation module consisting of exhaust gas recirculation with exhaust gas recirculation valve and exhaust gas recirculation cooler Diesel particulate filter with oxidation catalytic converter Plastic intake manifoldS444_029-You will find further information on this engine in self-study programme no. 442 “The 1.6 ltr. TDI Engine with Common Rail Injection System”.Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Fuel Exhaust gas treatment Emissions standard CO2 emissions CAYA 4-cylinder in-line engine 1598cm3 79.5mm 80.5mm 4 16.5:1 55kW at 4000 rpm 195Nm at 1500-2000 rpm Simos PCR2 Diesel complying with DIN EN590 Exhaust gas recirculation, oxidation catalytic converter and diesel particulate filter EU5/EU3 109g/km (Polo 2010)Power and torque development graphNm 240 210 180 150 120 90 60 30 kW 80 70 60 50 40 30 20 10100030005000rpmPower [kW] Torque [Nm]S444_03023Engines1.6 l 66kW TDI engineThe 1.6 1 66kW TDI engine is based on the 1.6l 55kW TDI engine. The software in the engine control unit has been adapted to the higher output.S444_029You will find further information on this engine in self-study programme no. 442 “The 1.6 ltr. TDI Engine with Common Rail Injection System”.Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Fuel Exhaust gas treatment Emissions standard CO2 emissions CAYB 4-cylinder in-line engine 1598cm3 79.5mm 80.5mm 4 16.5:1 66kW at 4200 rpm 230Nm at 1750-2500 rpm Simos PCR2 Diesel complying with DIN EN590 Exhaust gas recirculation, oxidation catalytic converter and diesel particulate filter EU5/EU3 118g/km (Golf 2009)Power and torque development graphNm 240 210 180 150 120 90 60 30 kW 80 70 60 50 40 30 20 10100030005000rpmPower [kW] Torque [Nm]S444_031241.6 l 77 kW TDI engineThe 1.6 1 77 kW TDI engine is based on the 1.6l 55kW TDI engine. The software in the engine control unit has been adapted to the higher output.S444_029You will find further information on this engine in self-study programme no. 442 “The 1.6 ltr. TDI Engine with Common Rail Injection System”.Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Fuel Exhaust gas treatment Emissions standard CO2 emissions CAYC 4-cylinder in-line engine 1598cm3 79.5mm 80.5mm 4 16.5:1 77kW at 4400 rpm 250Nm at 1900-2500 rpm Simos PCR2 Diesel complying with DIN EN590 Exhaust gas recirculation, oxidation catalytic converter and diesel particulate filter EU5/EU3 118g/km (Golf 2009)Power and torque development graphNm 240 210 180 150 120 90 60 30 kW 80 70 60 50 40 30 20 10100030005000rpmPower [kW] Torque [Nm]S444_03225GearboxesGearboxesManual gearboxesGearbox type Technical features Further information5-speed manual gearbox MQ200-5F 02T● ● ● ● ● ●Low weight Without speedometer sender G22 Start/stop version also available CO2-optimised ratio Constant mesh teeth are partially ground (5th gear and shaft splines) Torque capacity up to 170Nm6-speed manual gearbox MQ200-6F 02U● ● ● ● ● ● ●Low weight Without speedometer sender G22 Start/stop version also available CO2-optimised ratio Sheet metal bearing mounting replaced by reinforced bearing mounting Constant mesh teeth are partially ground (1st/2nd/6th gear and shaft splines) Torque capacity up to 175NmSSP 3065-speed manual gearbox MQ250-5F 02R● ● ● ● ● ●Developed from 02J gearbox Without speedometer sender G22 Start/stop version also available CO2-optimised ratio Torque capacity up to 250Nm Shortened gearshift travel (58mm)26Dual clutch gearboxGearbox type Technical features Further information SSP 3907-speed dual clutch gearbox DQ200-7F 0AM● ● ●Further development of 6-speed dual clutch gearbox 02E Dry double clutch with separate oil circuits for gearbox and mechatronics On-demand control of hydraulic pump motor V401 Explanation: The hydraulic pump only starts to deliver once the hydraulic oil pressure in the mechatronics falls below a defined threshold value. The mechatronic functions are guaranteed in this way without the pump having to deliver constantly.27ChassisOverview of chassisThe chassis of the Polo 2010 is essentially based on the chassis of the Polo 2004. It has a 30mm greater track width compared with the previous model. The Polo can be equipped with normal or sports suspension.There are new features in the areas: - Front axle - Steering column - Brake servo●ESP Bosch 8.2 with integrated sensor cluster●McPherson strut front suspension●Electro-hydraulic power steering system●10” brake servo for lefthand drive vehicles 7”/8” tandem brake servo for right-hand drive vehiclesS444_10028●Tyre mobility set (standard)●Torsion beam rear axle●New steering column concept (sheet metal steering column)29ChassisFront axleThe front axle uses McPherson strut suspension with improved kinematics for the new Polo. The track width has been increased by 30mm compared with the predecessor thus improving the driving dynamics potential. Shifting the wheels 5mm to the front gives a larger caster angle and an increased caster offset. The result is greater straightline stability. By optimising the manufacturing technology and the selection of material for the subframe and transverse link, it was possible to reduce weight, but maintain the same axle load.S444_103Rear axleThe design principle of the torsion beam axle has been taken from the previous model.The track width has been increased 30mm by increasing the offset of the semi-trailing arm.S444_131Semi-trailing arm30SteeringThe Polo 2010 is equipped with electrohydraulic power steering like its predecessor. This has been adapted to the new front axle.You will find further information on the electrohydraulic power steering in self-study programme no. 259 - “EPHS – Electrically Powered Hydraulic Steering”.S444_136Steering columnA new steering column has been developed to increase the crash safety and score 5 stars in Euro NCAP. The new steering column has the following features: Console and various other parts made from steel sheet Side adjusting lever Infinite reach adjustment with an adjustment range of 45mm Height adjustment using teeth (12 adjustment positions) with an adjustment range of 45mmS444_10431ChassisAdjustment mechanismThe steering column is clamped in position by a curved disc. There is a spring-loaded toothed plate under the curved disc. This design always guarantees tooth-in-tooth locking when you clamp the steering column in position. In the starting position, the lever is at the top and the teeth are engaged.Curved discS444_049Toothed plateIf you move the lever downwards, the toothed plate is disengaged by the pressure of the spring.S444_050You can now adjust the steering wheel position.S444_051If you move the lever upwards, the teeth mesh into each other again and lock the steering wheel in the desired position.32BrakesESP systemThe ESP system from Bosch 8.2 is used for the first time in the Polo. Except for the familiar systems like ABS, ESP, EDS and ASR, the control unit also has the following functions: Hill start assist Hydraulic brake assist system Tyre pressure monitor, TPM (optional) Electronic differential lock EDL (optional)Pressure sensor S444_133 Electrical connection for hydraulic pumpESP unitA pressure sensor is contained in the new ESP unit. The sensor cluster, which contains the yaw rate sensor as well as the longitudinal and lateral acceleration sensors, is not needed. These sensors are now integrated on the circuit board in the ABS/ESP control unit.33Heating and Air ConditioningThe Polo 2010 uses the same heating and air-conditioning concept as the previous model. Three variants are used: The manual heater and ventilation system The semi-automatic Climatic air conditioning The fully automatic Climatronic air conditioningEach variant has its own operating unit. The control units for the heating and ventilation system as well as for the Climatic are available with or without chrome trim depending on the vehicle equipment. All temperature and ventilation-related controls as well as the air conditioning system control unit are combined in one operating unit. Feedback LEDs for recirculation mode on the manual heating and ventilation system and on the Climatic semiautomatic air-conditioning system are new on the Polo 2010.Manual heating and ventilation systemThe temperature flap and the flaps for the air distribution are adjusted with the rotary knobs on the operating unit. The adjustment is transferred to the flap mechanism on the heater unit via a flexible shaft. The recirculation flap is closed and opened with the recirculation flap button. The recirculation flap is operated with a control motor. When the recirculation flap is open, this is indicated by the feedback LED.S444_137Feedback LED for recirculated air modeRotary knob for air distributionOn vehicles with a diesel engine, the auxiliary air heater element Z35 ensures fast heating of the interior. The auxiliary air heater element button is operated by a microswitch located inside the operating unit. The switch is activated when at least 90% of the heating power is selected on the temperature knob.Rotary knob for temperature selectionButton for recirculated air mode34The “Climatic” manual air-conditioning systemThe air conditioning system control unit J301 is located behind the air-conditioning controls. All signals from the sensors and actuators are sent to the control unit and evaluated to regulate the interior temperature. The temperature flap is adjusted by an electric motor. The central flap, footwell flap and defrost flap are adjusted with the air distribution knob via a flexible shaft.S444_138Feedback LED for recirculated air modeFeedback LED for air-conditioning mode“Climatronic” fully automatic air conditioningAll functions are controlled fully automatically on the “Climatronic” air-conditioning system.Rotary knob for ON/OFF and fan level Rotary knob for setting the interior temperatureThe Climatronic controls have been revised in some areas: The “ECON” button has been replaced with the “AC” button Changed button symbols Ambient temperature indicator omitted “Spanner” symbol for diagnosis mode omittedS444_139 Display for status of Climatronic AC buttonYou will find further information on the heating and air-conditioning systems in self-study programme no. 263 “Polo Model Year 2002”.35Electrical SystemFuse boxes and relay locations in the onboard supplyLocationsThe battery is mounted on the left-hand side of the engine compartment.●Main fuse box, on minus pole of battery.36●Onboard supply control unit, on left underneath dash panelS444_101●Fuse holder, under steering column37Electrical SystemNetworking conceptThe data bus diagnostic interface J533 (gateway) acts as the interface for communication between the following data bus systems: Powertrain CAN data bus Convenience/infotainment CAN data bus Diagnosis CAN data busJ285 J362T16aJ745J667J533J519J503 RbcdH8R78***J255J245J878****J345The two convenience and infotainment CAN data bus systems have been combined for the first time.R215J386J387J412Transfer speeds Powertrain CAN data bus: Convenience/infotainment CAN data bus: Diagnosis CAN data bus: Cornering light CAN data bus: LIN data buses: 500kbit/s 100kbit/s 500kbit/s 500kbit/s 19.2kbit/sLegend Powertrain CAN data bus Convenience/infotainment CAN data bus Sensor CAN data bus a b c d Diagnosis CAN data bus Door LIN data bus Roof LIN data bus Anti-theft alarm LIN data bus38List of abbreviations G85 G273 G384 G397 G419 H8 J104 J217** J234 J245 J255 J285 Steering angle sender Interior monitoring sensor Vehicle inclination sender Rain and light sensor ESP sensor unit Anti-theft alarm system horn ABS control unit Automatic gearbox control unit Airbag control unit Sliding sunroof adjustment control unit Climatronic control unit Control unit in dash panel insert J345 Trailer detector control unit J362 Immobilizer control unit J386 Driver door control unit J387 Front passenger door control unit J388 Rear left door control unit J389 Rear right door control unit J394 Sunroof roller blind control unit J412 Mobile telephone operating electronics control unit J446 Parking aid control unit J500 Power steering control unit J503 Control unit with display for radio and navigation J519 Onboard supply control unit J527 Steering column electronics control unit J533 Data bus diagnostic interface J587* Selector lever sensors control unit J623 Engine control unit J667 Power output module for left headlight J668 Power output module for right headlight J745 Cornering light and headlight range control unit J878**** Control unit for tilting roof R Radio R78*** TV tuner R215 Interface for external multimedia devices T16 Diagnosis connectorG419 J623 J217** J587* J104J446J500G85J668J234J394G273G384G397J388J389J527S444_038* ** *** ****DSG only Automatic gearbox only Japan only Later introductionCornering light CAN data bus LIN data bus CAN data bus line LIN data bus line Communications line39Radio, Navigation and TelephoneRadios and radio/navigation systemsTechnical data Monochrome display Colour display, touch sensitive FM, TP and RDS reception (single tuner) FM twin-tuner for FM, TP and RDS reception with phase diversity AM reception Integrated DAB tuner (digital radio) SDARS tuner (SAT radio) TP button RadioDataSystem (RDS) TMC function and TMC background reception Autostore function/memory spaces Integrated CD drive Integrated SD memory card reader Media support Audio input interface (AUX-IN) Telephone interface for telephone hands-free system Interface for connecting a reversing camera Loudspeaker output stages with 20watt output (2 or 4 loudspeakers can be connected) Treble, bass and balance sound adjustments Fader adjustment (only with four loudspeakers) Speed-dependent volume control Brightness of display illumination can be controlled separately from vehicle interior lighting Driving school function Self-diagnosis and loudspeaker diagnosis Service test mode Optical parking system (OPS) BAP-compatible/display of vehicle functions Navigation function with map, integrated direction symbols and speech SD card upload/download CD/SD navigation Further information in self-study programmeRCD 210 122 x 36 pixels ●S444_021●● ● ● /24 ● CD and MP3 audio data ● ● (only mono channel) ● ● ● ● ● ● ● ●No. 40440RCD 310 302 x 45 pixelsS444_022RCD 510S444_023RNS 310S444_0206.5”, 400 x 240 pixels ● ● Depending on equipment ● ● ● /24 ● CD, MP3 and WMA audio data ● ● ● ● ● ● ● ● ● Depending on equipment ● ● ●5.5”, 400 x 240 pixels ● ●● ● /24 6-disc CD changer ● CD, MP3 and WMA audio data ● ● ● ● ● ● ● ● ● ● ● ● ● ● /24 ● ● CD, MP3 and WMA audio data Navigation data ● ●● ● ● ● OPS, air conditioning ●● ● ● OPS, air conditioning ●● ● ● OPS, air conditioning ● Map display (2.5D)Audio No. 417 No. 423Audio, satnav/navigation data ● No. 42341Radio, Navigation and TelephoneAerial concept in PoloThe aerials for radio (AM, FM and DAB), navigation (GPS) and telephone (GSM/UMTS) are accommodated in the roof aerial. A short-mast aerial is used instead of a long-mast aerial.The short-mast aerial comes in two versions:●for AM/FM and DAB●for AM/FM, DAB, GPS and telephoneS444_040S444_041In addition to the previously presented radios and the radio/navigation system, two versions of the radio preparation are available for the Polo depending on the country, one version for radios with single-tuner and one for radios with dual-tuner diversity receiver.Radio preparation/radio with single-tunerRadio preparationBRCD 210B AM/FM S444_04642Radio preparation/radio with diversity aerial and DABAn additional aerial is integrated in the rear window for the dual-tuner diversity receiver.FM2 impedance transformer DAB B B A B ARadio preparationBRCD 310BRCD510*BAM/FM1 S444_047Radio/radio/navigation system with diversity aerial, telephone and DABFM2 impedance transformer DAB B A B A B A GPS GSM DC Telephone UMPPRCD 310BRCD 510*BRNS 310B AM/FM1S444_048* DAB – depends on country and version43Radio, Navigation and TelephoneUMPP Low (BluetoothTM only) with audio streamingTwo BluetoothTM profiles are used for UMPP Low with audio streaming: HFP stands for Hands-Free Profile and is a BluetoothTM profile for the telephone audio/ speech channel. Only speech data is transferred with this profile. The new Bluetooth profile A2DP audio streaming (Advanced Audio Distribution Profile) allows music files to be sent from the paired BluetoothTM device to the UMPP control unit in stereo quality. Considerably higher data quantities are transferred than with pure speech data.TMFunctions Control and display on mobile phone Hands-free system and radio mute switching Charge mobile phone in phone holder. Info and breakdown buttons on the mobile phone holder CAN data bus interface to convenience CAN data bus Data is transferred between the mobile telephone and the mobile telephone operating electronics control unit via BluetoothTM. UMPP is diagnosis compatible---J503RCD 310 RCD 510 RNS 310R65R54 Convenience CAN data bus J412 Pure speech data via HFP RCD 210 Mono channel R38 Terminal 30 Terminal 31 S444_055 Legend J412 J503 R38 R54 R65 Mobile telephone operating electronics control unit Control unit with display for radio and navigation Telephone microphone Mobile telephone Telephone aerial For music data Stereo channelsA2DPTelephone holderA new telephone holder is required to charge Nokia telephones in the Polo 2010. You can check the availability of telephone holders at www.volkswagenaccessories.com.44Convenience ElectricsOptical parking systemDisplay of OPS picture on RCD 310The optical parking system (OPS) is available for the Polo. The system was used for the first time in the Passat CC. The optical parking system is a software extension of the parking aid system. The driver is supported not only acoustically, but also optically.S444_059Display of OPS picture on RCD 310 (from week 45/09)When equipped with parking distance warning system, the Polo has ultrasound sensors at the rear. The parking distance warning system therefore only detects objects that are behind the vehicle. OPS is achieved by the parking aid control unit evaluating the distance information according to sector and transferring it to the screen. The BAP operating and display protocol is used on the CAN data bus for this. The visual images are displayed on the screen built into the radio or navigation system. This is possible with the RCD 310/510 radios and the RNS 310 navigation system.S444_140Display of OPS picture on RCD 510/RNS 510The advantages of the optical parking system:●S444_058● ●The position of obstacles is displayed in relation to the vehicle position. You can manoeuvre the car using the display. You can simply look at the screen to see the current state.You will find more information on the optical parking system in self-study programme no. 417 “The Passat CC 2009”.45Convenience ElectricsOnboard supply control unitLike the onboard supply control unit in the Golf 2009, the onboard supply control unit in the Polo 2010 has been expanded to include numerous other functions. In addition to the functions of the convenience system central control unit J393, the function of the data bus diagnostic interface J533 (gateway) is now also integrated in the onboard supply control unit J519. Even though a large number of functions have been combined in a single control unit and housing, the hardware scope has more or less stayed the same. The onboard supply control unit is connected via two 73-pole connectors. There are currently four equipment-related versions:● ● ● ●Basic + Medium + Medium ++ High+Convenience system central control unit J393 S444_057New onboard supply control unit J519 Old onboard supply control unit J519A large proportion of the bulb power is controlled by the onboard supply control unit using integrated semiconductor switches. In the current version of the onboard supply control unit, that is the turn signal, brake lights, side lights, tail lights and the reversing lights (automatic gearbox). Each function is switched by just one control unit output (1 PIN), e.g. all three left-hand turn signals.On the Polo, there are, however, also bulbs that are controlled conventionally by mechanical switches, i.e. light switch E1,for example, dipped beam, full beam and daytime running lights. The remote control aerial is integrated in the new onboard supply control unit. The radio aerial is not a separate wire aerial, instead it comes in the form of a circuit board aerial. Integration in the onboard supply control unit also allows a reception range of 30 to 50 metres.46LocationThe previous location under the left-hand side of the dash panel has been kept for the new onboard supply control unit.Relay carrier above onboard supply control unit Onboard supply control unit J519 S444_056FunctionsThe scope of functions depends on the equipment. The higher equipment levels are expanded by the listed functions. Equipment Basic + Scope of onboard supply control unit functions Medium ++ High+ Terminal control Load management Control of brake lights, side lights, parking lights and interior light Control of turn signal and hazard warning lights Wiper control, front and rear Control of horn Control of rear window heating Control of door control units Boot lid release Data bus diagnostic interface Powertrain and diagnosis CAN Central locking (control of locks, doors and flaps) Enabling of seat heating and tilting sunroof Control of windscreen washer system Control of front windscreen heating Control of door LIN data bus Control of roof LIN data bus (rain sensor, interior monitoring, inclination sensor, panoramic sliding roof) Exterior mirror heating CAN convenience Remote control (aerial integrated in control unit) Shiftlock, starter inhibitor Cruise control Control of anti-theft alarm LIN data bus Control of reversing lights, static cornering lights, fog lightsMedium +47444© VOLKSWAGEN AG, Wolfsburg All rights and rights to make technical alterations reserved. 000.2812.24.20 Technical status 06.2009 Volkswagen AG After Sales Qualifizierung Service Training VSQ-1 Brieffach 1995 D-38436 Wolfsburg❀This paper was manufactured from pulp that was bleached without the use of chlorine.