TECHNICAL DOCUMENTATION

SSP 449 The Touareg 2011

PDFEN60 pages5 MB
SSP 449 The Touareg 2011 - PDF cover

This PDF is currently unavailable.

Read document text
Service TrainingSelf-study Programme 449The Touareg 2011 The new Touareg, in its second generation, is a completely new development. As a luxury class off-road vehicle, it combines technical innovations, high comfort, sporty performance, a stylish design, outstanding quality and unrestricted off-road capabilities. The new Touareg is an all-rounder, which unifies the requirements of both on- and off-road driving even more perfectly than before. With its front end in the style of the new Volkswagen design, its low ride height with almost identical vehicle width and a multitude of aerodynamic details, the new Touareg has increased significantly in terms of dynamics whilst simultaneously improving its aerodynamics. All of the new Touareg's assemblies have been consistently developed further with regard to reduced fuel consumption and improved exhaust emissions. The gross vehicle weight of the basic version has been reduced by approx. 200kg whilst torsional rigidity has been increased at the same time. A V6 FSI engine and the turbodiesel engines, the V6 TDI and - for the first time - the V8 TDI, are combined with the new 8-speed automatic gearbox as standard. Curtain airbags for the front and rear passengers, airbags for the driver and front passenger, side airbags and seat belt pre-tensioners in the front offer a high level of passive safety as standard. With 4 cameras, the new "Area View" all-round monitoring system directly detects the area surrounding the vehicle and transmits this bird's eye view onto the radio/navigation system display.The new Touareg – a stylish, dynamic and authentic off-roader.S449_001The self-study programme portrays the design and function of new developments! The contents will not be updated.For current testing, adjustment and repair instructions, refer to the relevant after sales literature.Attention Note2 ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Occupant Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Power Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Running Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Heating and Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443 IntroductionThe Touareg 2011The standard products and equipment differ depending on the engines which are fitted. Whilst the basic equipment is only for the V6 engines, the vehicles with V8 engines are fitted with higher-quality equipment. The overview shows important standard and optional equipment in the new Touareg. Deviations are possible depending on the country.●Dynamic light assist●Rotating electronic ignition/starter switch●Bi-xenon headlights with AFS and LED daylight driving lights, optional●8-speed automatic gearbox●Dash panel insert with 7" display●Start-stop system for 6-cylinder engines●Electromechanical parking brake●"Area View" all-round view, optional●Adaptive Cruise Control ACC "Stop and Go" and "Front Assist" front monitoring system.4 ●Panoramic sliding roof, optional●Air suspension with closed-loop air supply●Longitudinally adjustable rear seat system●Luggage compartment cover with comfort opening●Electrical rear lid drive●Lane departure warning system●Lane Change Assist●4XMOTION four-wheel drive with transfer box, optionalS449_003●4MOTION four-wheel drive with Torsen differential●Knee airbag on the driver side, optional●Longitudinally and height adjustable front head restraints●Radio/navigation system RNS 850, optional5 IntroductionWeight reductionOne specification during the development of the new Touareg was a significant reduction in weight. Significant reductions were achieved particularly thanks to the use of aluminium in the running gear components and hotformed, high-strength and corrosion resistant steels for the body. A multitude of individual measures enabled the weight to be reduced by over 200 kg in comparison with the predecessor. Some of these measures are listed in the following graphic.Mechanical units -52kge.g. via:Body -67kge.g. via:-Torsen transfer box Front and rear axle differential Exhaust system-21.0kg -16.0kg -7.0kg-Doors Rear lid Longitudinal members-21.0kg -13.0kg -6.5kgOthers -18kge.g. via:Running gear -71kge.g. via:-Electronic parking brake Switch from water- to air-cooled alternators-3.0kg -1.0kg-Aluminium radial and swivel bearings Use of aluminium on the rear axle Plug-in propshaft-17.0kg -15.0kg -7.0kgS449_1036 Driving off-roadThe Touareg 2011 has the technical prerequisites for very good off-road capability. The following data refer to a vehicle with standard equipment, a 3.6 l 206 kW V6 FSI engine and 235/65 R17 E50 tyres plus a driver. (The weight of the driver corresponds to 75kg.)Maximum gradability: 4MOTION - 31° 4XMOTION - 45°S449_083Maximum possible lateral inclination: 35°S449_087Ground clearance when stationary: Steel suspension - 205mm Air suspension max. - 233mmS449_091Possible gradient entry/exit angle: Steel suspension max.- 25° Air suspension max. - 27°S449_081Possible breakover angle: Steel suspension max. - 20° Air suspension max. - 22°S449_085Possible fording depth: Steel suspension - 500mm Air suspension max. - 580mmS449_0897 IntroductionTechnical dataExterior dimensions and weightsThe data for the Touareg 2011 refer to a vehicle without a driver and with standard equipment; with a 3.6l 206 kW V6 FSI engine, with 4MOTION and with 235/65 R17 E50 tyres.1656 194017091676S449_093 916 2893 4795 986Exterior dimensionsTouareg 2011 Length Width Height Wheelbase Track width at front Track width at rear 4795mm 1940 mm 1709mm 2893mm 1656mm 1676mm Touareg 2003 4754mm 1928 mm 1726mm 2855mm 1653mm 1665mmWeights/further dataTouareg 2011 Permissible gross vehicle weight Kerb weight Trailed load Max. roof load Tank capacity Drag coefficient 2750kg 2043kg 3500kg 100kg 85l 0.36 cd Touareg 2003 2945kg 2214kg 3500kg 100kg 100l 0.38cd8 Interior dimensions1041989S449_097 18191642 580S449_095Interior dimensions and volumesTouareg 2011 Interior length Luggage compartment volume Luggage compartment volume with rear seat backrest folded down Knee space 2nd row of seats 1819mm 580l 1642 l Touareg 2003 1777mm 555l 1570l Front headroom Rear headroom Width at shoulder height, front Elbow width, front 81mm 36mm Touareg 2011 1041mm 989mm 1520mm Touareg 2003 1032mm 987mm 1465mm1549mm1504mm9 BodyBody structureThe body of the Touareg 2011 is a completely new development. The main development objective was to increase the body's stiffness whilst simultaneously reducing its weight.S449_105Mould-hardened steels have also been used in the Touareg 's body for the first time: Upper A-pillar Parts of the roof side member Inner B-pillar Bench seat cross member Roof cross member in vehicles without panoramic sliding roofVehicle with panoramic sliding roof The roof cut-out for the panoramic sliding roof is stabilised by a bonded reinforcement frame consisting of tailored blanks. This is necessary to guarantee safety in the event of a side impact.S449_03910 WingsThe Touareg 2011's wings consist of steel. These are secured at the sides on separate retaining plates. This results in a deforming wing edge. This is important with regards to pedestrian protection.S449_104DoorsThe doors' internal components are pre-assembled on a plastic assembly carrier. This is then installed into the doors as a whole. The front assembly carriers are bolted, whilst the rear ones are secured using a plastic clip which can be rotated by 90°.The exterior mirrors are bolted to the door outer skin. A small quarter light is located in the front section of the door.S449_09811 BodyTowing bracketThe folding towing bracket on the Touareg 2011 is unlocked electrically. The unlocking button is located in the right-hand luggage compartment trim.S449_106Button for unlockingS449_06312 Panoramic sliding roofThe panoramic sliding roof in the Touareg 2011 consists of two glass panels. The front panel can be moved and guided externally; the rear one is firmly bolted in place. Efficient heat-insulating glass is used for both glass panels. An electrically adjustable sun blind is also included. Operation is carried out via a central operating switch. The wind deflector is extended and retracted mechanically.S449_13913 BodyElectrically opening and closing rear lidThe Touareg 2011 can be optionally equipped with an electrically opening and closing rear lid. The system is made up of the following components: The radio remote control The rear lid remote release button E233 in the driver door lining The rear lid handle release button E234 One spindle drive on each side The power latching system in the lock The button to close rear lid in luggage compartment E406 The sensor strips The rear lid control unitThe rear lid can be opened and closed via two electric spindle drives from the driver's seat, using the rear lid handle release button E234, the button to close rear lid in luggage compartment E406 or using the radio remote control. Sensor strips are installed in the side areas of the rear lid for more sensitive pinch protection.S449_007Programming the opening angleThe rear lid opening angle can be set individually. To achieve this, the rear lid is moved electrically or manually to the desired end position. The button to close rear lid in luggage compartment E406 is then pressed and held for longer than three seconds. The current position of the rear lid is now stored as the upper end position. Successful setting is acknowledged by the hazard warning lights flashing once and by an audible signal. The rear lid cannot be programmed in the opening angle range from 0° to 20°.14 Pinch protectionDue to reasons of safety, dual pinch protection is available, firstly via what is called the excessive force detection system and secondly via pinch protection strips.Excessive force detection systemThe rear lid control system specifies a nominal speed to the spindle drives and sends the actual speed back into the spindle drives via Hall sensors. Deviations between the nominal and actual speed are evaluated by an algorithm. If sluggishness is detected, the speed is readjusted. If trapping is detected during closing, the rear lid moves back by approx. 10°. If trapping is detected during opening, the rear lid stops.Pinch protection stripsPinch protection strips, whose electrical resistance changes due to pressure, are located at the sides of the rear lid to detect trapping during closing. This resistance is monitored whilst the rear lid is being closed. Trapping exists if the resistance falls below a specific value. The rear lid reverses, i.e. it moves back and opens by approx. 10°. The pinch protection strips are not monitored whilst the rear lid is being opened. If a protection strip is defective, the rear lid can only be operated using the rear lid handle release button E234 and the button to close rear lid in the luggage compartment E406. The radio remote control and the rear lid remote release button E233 in the driver door lining are deactivated.Emergency operation functionOn failure of a spindle drive's Hall sensor, the rear lid can continue to be moved electrically. However, the motors are then actuated with a modified characteristic curve. If both Hall sensors fail, the rear lid is no longer actuated electrically. The rear lid can then be opened and closed manually with slightly increased force.15 BodySpindle driveDesign and function The spindle drive consists of a spindle actuator with electric motor and gear, a coil spring for force support plus a brake element and the wrap spring brake, for securely holding in each opening position. The electric motor drives the spindle via a two-stage planetary gear. The spindle moves the outer tube via the spindle nut.Hall sensorGear stage 2Spindle nutCoil springSpindleS449_102 Electric motor Gear stage 1 Wrap spring brake Outer tubeWrap spring brakeDesign and function As the spindle drive's holding torque is not sufficient to hold the open rear lid in position, a brake element is installed within the drive. The brake element is designed as a wrap spring brake. If the springs are tensioned by rotating the drive or output levers, their dimension is reduced. This reduces the friction torque to the outer housing. As soon as the rotational movement stops, the springs relax and the friction torque increases. The movement is stopped.Wrap spring, outer Output lever on spindle side Wrap spring, innerOuter housing Spring carrier Drive lever on gear side Washer S449_10016 Front light conceptHeadlight moduleThe front light concept in the Touareg 2011 encompasses two different headlight modules. The halogen front headlights form part of the standard equipment. Xenon headlights are optionally available. If the vehicle is equipped with a V8 engine, the xenon headlights are fitted as standard. The headlight modules are equipped with a turn signal, side light, daylight driving light, dipped beam and main beam headlight. Thanks to the familiar one-touch system, the headlight modules' bulbs can be released and removed with one "touch". The front light concept also includes fog lights.S449_134 Fog lightFog lightThe fog light with cornering light is located in the front spoiler. The fog light's bulb is changed via a flap in the wheel housing liner.S449_14017 BodyHalogen headlightsDaylight driving light bulb/ main beam bulbS449_148 Dipped beam bulb Side light bulb Turn signal bulbDaylight driving lightsDipped beamS449_181 The daylight driving light bulb lights up when daylight driving lights are actuated.S449_185 The dipped beam bulb and the side light bulb light up when dipped beam is actuated.Side lightMain beamS449_183 When the side light is switched on, the side light bulb lights up.S449_187 When main beam is switched on, the main beam bulb, the dipped beam bulb and the side light bulb light up.Turn signalS449_149 The turn signal bulb flashes when the turn signal is actuated.18 Top xenon headlightsSide light bulbS449_151 S449_151 Dipped beam bulb/ main beam bulb LED side light bulbs/ daylight driving light bulbs Dipped beam Turn signal bulbDaylight driving lightsS449_189 The LED daylight driving light bulbs light up when the daylight driving light is actuated.S449_193 The dipped beam bulb, the side light bulb and the LED side light bulbs light up when dipped beam is actuated.Side lightMain beamS449_191 The LED side light bulbs and the side light bulb light up when the side light is actuated.S449_195 When main beam is switched on, the main beam bulb and the side light bulb light up.Turn signalS449_142 The turn signal bulb flashes when the turn signal is actuated.19 BodyRear light conceptThe rear light concept in the Touareg 2011 encompasses the split rear lights, one section of which is located in the side panel and the other section in the rear lid, plus the rear fog lights in the rear spoiler.Rear lightsRear lightsThe rear lights on the Touareg 2011 are split into two sections The bulbs for the inner light can be renewed without removal. The outer light has to be removed to remove the bulbs. It is secured using a central bolt.Fog lightS449_136Tail light bulb/brake light bulbTail light bulbS449_138 Turn signal bulb Reversing light bulb20 Interior equipmentFront seatsSports and luxury seats are available in addition to the basic seats. The sports and luxury seats are equipped with electropneumatic backrest lateral support adjustment as standard. Active climate control is additionally available as an option for the luxury seats.Basic seatActive climate control seatBackrest lateral support adjustmentS449_015Active climate control seatAir flows through the seat cushions and backrests by means of radial fans. The air is routed through integrated ducts in the foam padding and through air-permeable foam cushions.Backrest lateral support adjustmentAdjustment is carried out via a combination of a pneumatic drive and a mechanical adjustment facility.Head restraintsThe head restraints on the luxury and sports seats are longitudinally and height adjustable. Operation is carried out via a central button for both adjustment directions.S449_15721 BodyRear seat systemThe rear seat system is split as standard and can be moved 160 mm in the longitudinal direction. The backrests can be locked in three inclination positions. An electric backrest release function is optionally available.S449_011Electric backrest release functionOperation is carried out via buttons in the right-hand luggage compartment trim.Buttons for electric backrest release function S449_16322 Luggage compartmentAs the rear seat system can be longitudinally moved 160 mm, the variability of the interior and the achievable cargo space increase significantly. The maximum effective load compartment width has been increased by 190 mm to 1350 mm, which allows up to 4 golf bags to be loaded easily. Depending on the position of the rear seat bench, the luggage compartment volume ranges from 580 to 660 litres, increasing to 1642 litres when the rear seat bench is folded down.Variable load floorThe variable load floor leads to the creation of a flat load surface, enabling bulky objects to be loaded more easily. Space for securely storing many utensils, such as an umbrella, torch or even a folding spade, is also available beneath the load floor. The load floor can be removed, rotated by 180° degrees, and its lower side is coated with film (for soiled cargo).S449_16723 Occupant ProtectionSafety equipmentThe new Touareg is equipped with two front, side and curtain airbags as standard. To protect the lower extremities, it also offers an optional knee airbag on the driver side.Crash sensorsCrash sensors for detecting an accident at an early stage are located beneath the headlights.Knee airbagThe knee airbag forms part of the front airbag system. In the event of an accident, this airbag is activated together with the driver and front passenger airbag in order to avoid injuries to the knees and lower legs. In the event of an impact at an offset angle, the feet are also better protected against lateral twisting. In the case of a crash, the 21-litre airbag inflates in less than 25 milliseconds in front of the driver's knees. With interaction of the seat belt and the driver airbag, the knee airbag absorbs the majority of the energy being dissipated in the pelvis area.24 S449_005Side crash sensorsPressure sensors for detecting a side crash are located in the front doors. Lateral acceleration sensors for detecting a side crash are located in the area of the rear wheel housings.25 Occupant ProtectionProactive occupant protection systemThe characteristic feature of this occupant protection system is the connection of active and passive safety elements. The basis of this is the use of dynamic handling control system sensors, such as e.g. Front Assist, Brake Assist and ESP, in order to detect critical vehicle dynamics situations with an increased accident potential.The proactive occupant protection system is activated when one of the following criteria is met: An object is detected by Front Assist in the area at risk of collision Emergency braking (very fast brake pedal actuation) Hazard braking (sharp increase in brake pedal pressure during braking) Unstable vehicle conditions, such as e.g. excessive vehicle under/oversteeringS449_173If a potential accident situation is detected, the occupants and the vehicle are prepared for a possible accident. Tensioning of the seat belts by means of electric motors secures the driver and front passenger in their seats, in order to therefore achieve optimal protection via the airbag and seat belt system. In the event of excessive vehicle under/oversteering, the panoramic sliding roof and the side windows are additionally closed until a residual gap remains. Once the driver has regained control of the vehicle and it has been returned to a stable dynamic handling condition, the seat belts are relaxed again. At the start of a journey ( 15km/h), the seat belts are also gently tensioned once in order to reduce belt slack.Accident avoidance phaseCrash phaseNormal drivingWarningCritical driving conditionCritical driving condition, preventive measures Reversible seat belt pretensioners, sliding roof + windows close, automatic emergency brakeAccidentRescueAdaptive Cruise Control, Lane Departure Warning, lane change assistABS, ESP, TCSDeployment of airbags and pyrotechnical seat belt pretensionersDeployment of emergency call systemS449_00226 Reversible seat belt pre-tensionersSeat belt Reduction gearElectric motorPyrotechnical seat belt pretensionerReversible seat belt pre-tensioners are fitted for the driver and front passenger seat belts. These seat belt pre-tensioners consist of a pyrotechnical and an electric reversible seat belt pre-tensioner and a control unit. The control units are integrated into the CAN data bus system. When the corresponding information is available on the data bus, the electric, reversible seat belt pretensioners are actuated. The pyrotechnical seat belt pre-tensioners are triggered by the airbag control unit.S449_012Pyrotechnical seat belt pre-tensioner Seat beltElectric, reversible seat belt pre-tensioner Seat beltElectric motor Reduction gearReduction gear Piston with toothed rackSeat belt shaftSeat belt shaftS449_016S449_014Three different force levels are available: 1. Low force = reduction of belt slack at the start of a journey 2. Medium force= partial tensioning in the event of critical lateral and longitudinal dynamics 3. High force = full tensioning in the event of very critical lateral and longitudinal dynamics27 EnginesStart-stop systemWhen equipped with the following engines, the new Touareg 2011 is fitted with a start-stop system as standard: 3.6 l 206 kW V6 FSI engine 3.0 l 176 kW V6 TDI engine Whether and how frequently the combustion engine is deactivated is determined by the engine control unit on the basis of numerous signals. The basic requirement is that the occupants' comfort and driving safety must be maintained. In these cases, the combustion engine is not deactivated. If necessary, it continues to operate the comfort- and safety-relevant components. The start-stop system uses a multitude of signals to check its activation and deactivation conditions and to carry out its function. The graphic provides an overview of the essential sensors, actuators and control units involved in the start-stop system's function.The start-stop system serves to reduce consumption, emissions and noise by automatically shutting off the engine during stationary phases and restarting it automatically when the driver wishes to move off. In the Touareg, control is carried out via the brake. When the driver brakes to a standstill, the engine is shut off. When the driver releases the brake again, the engine starts.Sensor for wheel speeds Sensor for brake vacuum Sensor for engine speed Bonnet lock contact Door lock contact Belt buckle contact Lambda probe heating Gearbox control unit Shock absorber control unit Electronic parking brakeBattery data moduleAlternatorStart-stop button Starter ring gear Starter Electronic oil pump DC/DC converter Absorbent mat battery Display elements Body Control module 1 Body Control module 2Engine control unitESPClimatronicS449_053Further information on the start-stop system can be found in self-study programme No. 426 "The Start-stop System 2009".28 3.6l 206kW V6 FSI engineThe basic layout of the 3.6 l V6 FSI engine from the Touareg 2011 corresponds to the familiar and proven 3.6 l VR6 engine which is fitted in the Passat, for example.Technical features●● ●Oil level/oil temperature sender with ultrasonic measurement principle Start-stop system Innovative thermal management in the engine with switched water pumpS449_023Further information on this engine can be found in self-study programme No. 360 "The 3,2ltr and 3,6ltr FSI-Engine".Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Fuel CGRA VR engine 3597cm3 89mm 96.4mm 4 12 : 1 206kW at 6200 rpm 360Nm at 3000 - 4000 rpm BOSCH MED 17.1.6Output and torque curvesNm 400 350 300 250 200 150 kW 200 175 150 125 100 75 50 25Premium plus unleaded RON 98 (slightly reduced output with premium unleaded RON 95) Three-way catalytic converter with Lambda control EU5100 50Exhaust gas treatment Emissions standard100030005000rpmOutput [kW] Torque [Nm]S449_10829 Engines3.0 l 176 kW V6 TDI engineBased on the V6 TDI engine which was first introduced in 2005 and was upgraded to the EU5 emissions stage in 2007, this engine has been further developed for the new Touareg.Technical features●● ● ● ●●Common rail fuel injection system with piezo injectors and a maximum injection pressure of up to 1800 bar Requirement-controlled fuel delivery unit* Low-temperature exhaust gas recirculation* Volumetric flow-controlled oil pump* Oil level/oil temperature sender with ultrasonic measurement principle* Start-stop systemS449_025Basic information on the V6 TDI engine can be found in self-study programme No. 350 "The 3.0l V6 TDI Engine".*These technical features are described in self-study programme No. 467 "The 4.2l TDI Engine with Common Rail Fuel Injection System".Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Fuel Exhaust gas treatment CASA 6-cylinder V engine 2967cm3 91.4mm 83mm 4 16.8 : 1 176kW at 4000 - 4400 rpm 550Nm at 2000 - 2250 rpm BOSCH EDC 17 Diesel fuel according to EN 590 Exhaust gas recirculation, oxidising catalytic converter, diesel particulate filter EU5 195g/kmOutput and torque curvesNm 550 500 450 400 350 300 250 200 kW 160 140 120 100 80 60 40 20Emissions standard CO2 emission100030005000rpmOutput [kW] Torque [Nm]S449_11030 4.2 l 250 kW V8 TDI engineIn the 4.2 l V8 TDI engine, Volkswagen has a diesel engine which, with 250 kW at 4000 rpm and 800 Nm as of 1750 rpm, offers outstanding output values and superior performance. The engine achieves the desired emission targets and complies with the EU5 standard.Technical features●●● ● ● ● ● ●Bosch common rail fuel injection system with piezo injectors Diesel particulate filter/oxidising catalytic converter Turbocharger with speed sensor Low-temperature exhaust gas recirculation Requirement-controlled fuel delivery unit Innovative thermal management (ITM) Volumetric flow-controlled oil pump Oil level/oil temperature sender with ultrasonic measurement principleS449_027Further information on this engine can be found in self-study programme No. 467 "The 4.2 l V8 TDI Engine with Common Rail Fuel Injection System".Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Maximum torque Engine management Fuel Exhaust gas treatment CKDA 8-cylinder V engine 4134cm3 83mm 95.5mm 4 16.4 : 1 250kW at 4000 rpm 800Nm at 1750 - 2750 rpm BOSCH EDC 17Output and torque curvesNm 800 700 600 500 400 300 kW 240 210 180 150 120 90 60 30Diesel fuel at least 51 CN Exhaust gas treatment Oxidising catalytic converter, exhaust gas recirculation with exhaust gas cooling, diesel particulate filter EU5 249g/km200 100Emissions standard CO2 emission100030005000rpmOutput [kW] Torque [Nm]S449_04031 Engines3.0 l 245 kW V6 TSI engine with supercharging (in the Touareg Hybrid 2011 only)With the 3.0 l 245 kW V6 TSI engine and mechanical charging (supercharger), Volkswagen has introduced a new engine which will only be fitted in the Touareg Hybrid 2011.S449_169Technical features● ● ● ● ●Technical data● ● ● ●● ● ●Six-cylinder V engine with mechanical charging Volumetric flow-controlled oil pump Fuel system regulated according to requirements Intake manifold flaps Secondary air system to comply with exhaust emissions legislation Belt drive to drive the supercharger Supercharger with charge air coolers Variable valve timing on the intake side only Oil level/oil temperature sender with ultrasonic measurement principle Oil gauge in the infotainment system Innovative thermal management (ITM) The following components are driven electrically: - Vacuum pump for the brake servo (in addition to the mechanical vacuum pump) - Power steering pump - Air conditioner compressorEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Maximum output Max. torque in petrol mode Engine management Fuel Exhaust gas treatmentCGEA 6-cylinder V engine 2995 cm3 84.5mm 89mm 4 10.5 : 1 245kW at 5500-6500 rpm 420Nm at 3000-5250 rpm BOSCH MED 17.1.6 Super unleaded RON 95 Cylinder bank-selective Lambda control with a broadband probe before catalytic converter per cylinder bank, two ceramic catalytic converters with Lambda probe (transient probe) after the catalytic converter EU5Emissions standard32 Torque/output graphT [Nm] O [kW] 300600250500 400200In kick-down, the drive output of the combustion engine and the electric motor are added in the output curve to give a maximum total output of 279 kW. This means that the output curve is increased by the amount of the electric motor's driving power, 34 kW. This occurs over almost the entire speed range. Whilst the combustion engine is running, a mixed mode occurs.150 100 50300200100 1000 2000 3000 4000 5000 60000 [rpm]S449_196Total torque Torque, combustion engine Total output Output, combustion engineFurther information on this engine can be found in self-study programme No. 452 "The 3.0 l 245 kW TSI Engine with Supercharging".33 EnginesElectric hybrid driveFor the first time at Volkswagen, an electric hybrid drive, i.e. a combination of a combustion engine and an electric motor, will be available for use at the start of production in the Touareg 2011. The Touareg Hybrid is a conventional vehicle concept which has been "hybridised". The hybrid system is combined into the existing and tried-and-tested technology. During vehicle development, focus was placed on technician safety when handling the high-voltage technology. Numerous shut-off functions and back-up facilities in the hybrid system prevent undesired dangers for workshop employees. The combination of new high-voltage components and tried-and-tested technology from Volkswagen means that the Touareg Hybrid is leading the way into an increasingly electrified future.S449_033Retention of the driving performance of the conventional drive train in combination with the extensively available technical components from series production was an essential criteria on selection of the parallel hybrid concept.The standard Touareg's familiar characteristics are retained. These include - its gradability, - its off-road capability, - its trailed load of 3500 kg, - its high-powered drive and - occupant comfort.34 Overview of the drive train3.0 l 245 kW TSI engine 8-speed automatic gearbox Transfer box with Torsen differential Rear axle differentialS449_035 Power electronics Electric motor High-voltage cables High-voltage batteryThe drive train on the Touareg Hybrid consists of: The 3.0 l 245 kW TSI engine with supercharging, A separating clutch between the combustion engine and the electric motor, The electric motor, The automatic 8-speed gearbox 0C8 from Aisin, The drive shafts, The transfer box on the rear and front axles, The Torsen differential.The combustion engine, the clutch, the electric motor and the automatic gearbox are located behind one another on a common shaft. This method enabled installation space and weight caused by additional hybrid components to be saved. In addition to drive components, the electric motor, power electronics and the high-voltage battery in the Touareg Hybrid, the air conditioner compressor is a further component which is operated by the highvoltage system.Further information on the electric hybrid drive can be found in self-study programme No. 450 "The Touareg Hybrid".35 EnginesOil gauge in the infotainment systemA realistic oil gauge will be implemented for the first time in the Touareg. The previously used oil dipstick will be omitted. The customer is only provided with warnings regarding the oil level via the dash panel insert. The oil level is displayed on the infotainment display in the centre console.Display range: A =Oil level OK, do not replenish oil B =Oil level too low, replenish oil urgently (approx. 1 l) C =Oil can be replenished (approx. 0.5 l) D =Overfilling warning, urgently reduce oilS449_051A new oil gauge tester T40178 is available. Further information on the oil gauge can be found in SSP 452.The display contents which are shown correspond to the infotainment system with German system setting and serve merely as an example. Please refer to the corresponding operating manuals for the text contents in the relevant national languages for the display in the dash panel insert.To measure the oil level: The vehicle must be positioned horizontally. The oil temperature must lie between 60°C and 120°C. After stopping the engine, wait briefly and allow the oil to flow back into the oil pan. Switch on the ignition, press the "CAR" infotainment button, press the "Service" function button.The oil pressure/oil level display in the dash panel insert is maintained as follows:Possible cause Lights up Engine oil level too low Remedy Switch off engine. Check oil level.Lights up Problem with the engine oil pressureDrive to a dealership at the maximum engine speed indicated in the dash panel insert and have the system checked.FlashesEngine oil pressure too lowSTOP! Do not continue driving! Switch off engine. Check oil level. Do not continue driving if the warning lamp flashes, although the oil level is OK. Seek professional help. Visit a dealership. Have the engine oil sensor checked.FlashesEngine oil system malfunction36 Power TransmissionTransfer boxThe Touareg 2011 will be available with two different transfer boxes. The basic distribution of both transfer boxes is 40:60 (front axle:rear axle). The customer has the option of choosing between two types of drive train:4MOTION4XMOTIONS449_043S449_045The Torsen transfer box will be available in the basic equipment. The self-locking centre differential has permanent four-wheel drive. The transfer box operates purely mechanically and reacts without delay to changes in driving situations. Its compact design, low weight and lifetime oil filling mean that the transfer box is maintenance-free and reliable.The Touareg will be available with the familiar centre differential as m-equipment. In terms of its functions, the centre differential has not been modified. It has an electronic lock in the centre and rear differential plus a reduction stage. The flanged shafts have been omitted.Further information can be found in self-study programme No. 469 "The Touareg 2011 Running Gear and Four-wheel Drive Concept".Further information can be found in self-study programme No. 302 "Touareg - Chassis and four-wheel drive concept".37 Power Transmission8-speed automatic gearbox 0C8An 8-speed automatic gearbox will be introduced for the first time at Volkswagen passenger cars with the Touareg 2011. The 8-speed automatic gearbox 0C8 is a further development of the 6-speed automatic gearbox 09D. The eight forwards gears (smaller gear ratio steps) have enabled the consumption and emissions values to be further reduced in comparison with the 09D automatic gearbox. Once again, the eight forwards gears is made possible by the proven Lepelletier gear set concept. The 0C8 automatic gearbox can be optionally equipped with the start-stop system, and is also designed for use with the hybrid drive. All engine variants in the Touareg will be exclusively available with this gearbox.S449_037Further information on the 8-speed automatic gearbox is available in self-study programme No. 466 "8-speed Automatic Gearbox 0C8".38 Technical dataDeveloper/ manufacturer Designation Gearbox features AISIN AW CO. LTD Japan●●● ●Control system● ● ●Within Volkswagen AG: AL 1000-8Q In the service department: Automatic gearbox 0C8 Electrohydraulically controlled 8-speed planetary gearbox with a simple primary planetary gear set and a downstream Ravigneaux planetary gear set as a secondary planetary gear set Hydrodynamic torque converter with slip-controlled torque converter lock-up clutch Designed for longitudinal installation in combination with a transfer box Hydraulic control unit (valve chest) in the oil sump with external electronic control unit Dynamic Shift Program DSP with separate sports programme in "position S" and "Tiptronic" mode for manual gear changes Special feature: Starting off in 2nd gear is possible in Tiptronic modeTorque ATF service Weight SpeedDepending on version, up to 1000 Nm Gearbox oil change, see ELSA Depending on adaptation of the gearbox to the engine, between 91 kg and 108 kg Depending on engine, the top speed can be achieved in 6th, 7th or 8th gearTorque converter ATF oil pump Primary planetary gear set Secondary planetary gear set ATF pre-heaterS449_042 Auxiliary hydraulic pump 1 for gearbox oil V475 (for hybrid drive) or auxiliary hydraulic pump 2 for gearbox oil V476 (for start-stop system) Valve chest Housing39 Running GearOverviewThanks to its running gear tuning, the Touareg 2011 offers outstanding off-road qualities. However, it also guarantees maximum ride comfort on normal roads. The running gear therefore combines the following characteristics: Very good vibration and wheel and tyre comfort Low tendency to roll Agile performance High dynamic stability Very good off-road capabilities●Leather or wood steering wheel, with multi-function buttons as standard●Lightweight running gear●Lane Assist●ABS/ESP with MK25 A-XT●Torsen transfer box or optionally, a transfer box with reduction stage and lockable centre and rear differential40 ●Electromechanical parking brake●Tyre pressure monitorS449_065●Air suspension with closed-loop air supply and regulated damping, optional●Adaptive Cruise Control with "Stop and Go" and automatic emergency braking functionFurther information on the running gear can be found in self-study programme No. 469 "The Touareg 2011 Running Gear and Four-wheel Drive Concept".41 Electrical SystemOverview●"Area View" all-round view, optional●Bi-xenon headlights with masked permanent main beam and LED daylight driving lights, optional●Rotating electronic ignition/starter switch●Dynamic light assist●Adaptive Cruise Control ACC "Stop and Go" and "Front Assist" front monitoring system42 ●5th generation immobiliser●Dynaudio sound system●Multi-function camera for several driver assistance systems●Lane Assist lane departure warning systemS449_069●Dash panel insert with 7" TFT colour display (premium) or with 5" TFT monochromatic display (basis)●Radio/navigation system RNS 850●Premium preparation for telephone installation with separate SIM card which can be used as a fixed-installation telephone.Further information on the electrical system can be found in self-study programme No. 470 "The Touareg 2011 Electrical/ Electronics System".43 Heating and Air ConditioningAir conditioningThe new Volkswagen Touareg is equipped with the Climatronic automatic air conditioner as standard. The Climatronic system is a combination of a heating and ventilation system plus a cooling system. In order to meet different comfort requirements, customers can choose between two different Climatronic variants:● ●The 2-zone Climatronic The 4-zone ClimatronicS449_067At first glance, the systems are distinguished by the rear air conditioner control panel which is or is not installed.Radio/navigation system RNS 850 displayThe front air conditioner control panels are identical for both systems, and only differ from each other due to their coding. The temperature control range of both systems lies between 16°C and 29.5°C.S449_049Front operating and display unit Rear operating and display unit44 OperationFront operating and display unitS449_116The following functions are available at the front operating unit: OFF - switching off the control panel AUTO - automatic function AC on/off Temperature regulation for the front right and left seats Air distribution setting for the front row of seats Blower intensity setting for the front row of seats Manual recirculated air function Synchronisation with the driver's climatic zone Max. defrost Residual heat function Instant heat button (optional) Left and right seat heating (optional) Left and right seat ventilation (optional) Heated rear windowRear operating and display unitS449_118The following functions are available at the rear operating unit: OFF - switching off the rear control panel AUTO - automatic operation Temperature regulation for the two rear right and left seats Air distribution setting for the rear row of seats Blower intensity setting for the rear row of seats Right and left seat heating (optional)45 Heating and Air ConditioningDisplay in radio/navigation system RNS 850The Climate button is used to activate the mode for the climate settings in the radio/navigation system RNS 850 display. The display is designed as a touch screen.DisplayClimate buttonFront climate settingsThe following functions are available: Air distribution setting Electric steering wheel heating Electric windscreen heater Blower intensity setting for the front seats AUTO, automatic temperature, blower and air distribution regulation plus climate profile setting Extras Auxiliary heater Rear settings, switch to the rear climate settingsS449_020S449_022"Extras" menuThe following settings are possible under the "Extras" menu: Three different climate profiles - "Low", "Medium" and "High" Activation/deactivation of automatic recirculated air Activation/deactivation of the automatic windscreen heaterS449_02446 "Auxiliary heater" menuThe following settings are possible under the "Auxiliary heater" menu: Activation/deactivation of the auxiliary heater Run time programming (activation via the radio remote control or via "Immediate activation") Timer programming (the point in time at which the interior is to be heated is programmed)S449_026-Rear climate settingsThe following functions are available: OFF, switching off the rear control panel AUTO, automatic temperature, blower and air distribution regulation Temperature regulation for the two rear right and left seats Air distribution setting for the rear row of seats Blower intensity setting for the rear row of seatsS449_028The display contents which are shown correspond to the infotainment system with German system setting and serve merely as an example. Please refer to the corresponding operating manuals for the text contents shown on the display in the relevant national languages.47 Heating and Air ConditioningNetworkingIn the Touareg, not all sender and sensor signals are read directly into the Climatronic control unit. The signals from the senders for refrigerant pressure, the air quality sensor and the rain/light/humidity sensor on the windscreen are transmitted to the onboard supply control unit via a separate LIN bus, and are placed onto the CAN convenience bus. The data is then forwarded to the Climatronic control unit via the gateway control unit. The air conditioner compressor regulating valve N280 is also linked to the onboard supply control unit. In this case, the control signals are transmitted from the Climatronic control unit to the onboard supply control unit via the gateway control unit.4-zone ClimatronicG308 Z1 J520V425G397V158V213G261Z2G17J519CAN convenience data busG65V299V453G262N82N280 J533G238V108V80G385G107Left front seat heating Right front seat heatingV110V2G386J708J364V107CAN operation and display data busV159J255 E8748 Legend E87 E265 G17 G65 G107 G238 G261 G262 G308 G385 G386 G397 G635 G636 J255 J364 J519 J520 J533 J708 N82 N280 V2 V80 V107 V108 V110 V158 V159 V211 V212 V213 V240 V299 V313 V316 V314 V425 V453 Z1 Z2 Operating and display unit for Climatronic air conditioning system Rear Climatronic operating and display unit Ambient temperature sensor High-pressure sender Sunlight penetration photosensor Air quality sensor Left footwell vent temperature sender Right footwell vent temperature sender Evaporator temperature sensor Front left chest vent temperature sensor Front right chest vent temperature sensor Rain and light sensor Rear left chest vent temperature sender Rear right chest vent temperature sender Climatronic control unit Auxiliary heater control unit Onboard supply control unit Onboard supply control unit 2 Data bus diagnostic interface Residual heat relay (for water pump) Coolant shut-off valve Air conditioner compressor regulating valve Fresh air blower Rear fresh air blower Defroster flap control motor Left footwell flap control motor Left centre vent control motor Left temperature flap control motor Right temperature flap control motor Right B-pillar and footwell shut-off flap control motor Left B-pillar and footwell shut-off flap control motor Indirect ventilation flap control motor Right rear air quantity flap control motor Left side vent control motor Rear left temperature flap control motor Rear right chest vent control motor Rear right temperature flap control motor Fresh air/recirculated air, air flow flap control motor Right indirect ventilation flap control motor Heated rear window Heated windscreenV313V314V211V316Left rear seat heating Right rear seat heatingG636V212G635E265S449_126CAN convenience data bus CAN operation and display data bus CAN data bus line LIN data bus line49 Heating and Air Conditioning2-zone ClimatronicG308 Z1 J520 G397V425V158G261Z2G17J519CAN convenience data busG65V299G262N82N280 J533G238V108G385G107Left front seat heating Right front seat heatingV110V2G386J708 J364V107CAN operation and display data busV159Z35J255 E87S449_130Legend E87 G17 G65 G107 G238 G261 G262 G308 G385 G386 G397 J255 J364 J519 J520 J533 J708 N82 N280 Operating and display unit for Climatronic air conditioning system Ambient temperature sensor High-pressure sender Sunlight penetration photosensor Air quality sensor Left footwell vent temperature sender Right footwell vent temperature sender Evaporator temperature sensor Front left chest vent temperature sensor Front right chest vent temperature sensor Rain and light sensor Climatronic control unit Auxiliary heater control unit Onboard supply control unit Onboard supply control unit 2 Data bus diagnostic interface Residual heat relay (for water pump) Coolant shut-off valve Air conditioner compressor regulating valve V2 V107 V108 V110 V158 V159 V299 V425 Z1 Z2 Z35 Fresh air blower Defroster flap control motor Left footwell flap control motor Left centre vent control motor Left temperature flap control motor Right temperature flap control motor Left side vent control motor Fresh air/recirculated air, air flow flap control motor Heated rear window Heated windscreen Auxiliary air heater elementCAN convenience data bus CAN operation and display data bus CAN data bus line LIN data bus line50 Auxiliary coolant heater/pre-heaterThe Touareg 2011 can be fitted with an optional, fuel-operated auxiliary coolant heater (auxiliary heater) from Eberspächer. This enables the vehicle interior to be pre-heated and the windows to be defrosted in the case of low exterior temperatures. The auxiliary coolant heater is actuated with the radio remote control or with the aid of the menu guidance in the central display, or can be pre-programmed to a set time.Radio remote controlR149CAN operation and display data busJ364 J255 E87V54N279S449_132Designation of vehicles with: Diesel engineD5W-F Petrol engine B5W-FLegend E87 Operating and display unit for Climatronic air conditioning system J255 Climatronic control unit J364 Auxiliary heater control unit N279 Heater coolant shut-off valve (3/2-way directional control valve) R149 Remote control receiver for auxiliary coolant heater V54 Metering pumpVehicles with a diesel engine and 4-zone Climatronic are fitted with a preheater as standard.51 Heating and Air ConditioningCoolant circuitTo a large extent, the coolant circuit corresponds to that in the Touareg 2003. The so-called "internal heat exchanger" is new. This involves a refrigerant pipe which forms a "pipe-in-pipe system". With the refrigerant pipe, the low-pressure pipe is routed, spatially separated, through the high-pressure pipe. In this system, the refrigerant flow in the outer pipe moves to the expansion valve and that in the inner pipe from the expansion valve back in the direction of the air conditioner compressor. This design increases the system's efficiency, and contributes towards minimising fuel consumption.S449_032Internal heat exchangerHigh pressureLow pressureS449_06252 Control motorsThe control motors for the flap drives are all of an identical design and can therefore basically be used on any flap. The motors are stepper motors. In comparison with the control motors used so far, these do not require a potentiometer. The 2-zone Climatronic has 7 control motors on the air conditioner unit. The 4-zone Climatronic is equipped with 2 additional control motors in the dash panel for indirect ventilation. 5 additional control motors are installed for the second row of seats; these are linked to the rear air conditioner control panel via a separate LIN bus.S449_058The control motors are connected in series, and are actuated via a separate LIN bus by the Climatronic control unit.LIN data busTerminal 30 Terminal 31 S449_018So that the Climatronic control unit can assign the individual control motors to the various flaps, addresses have to be assigned to them. The individual control motors are addressed using the VAS diagnostic tester in the "Guided Fault Finding" or "Guided Functions" programmes. In this case, the addresses of all of the control motors are initially reset. The Climatronic control unit then transmits the signal for automatic addressing. The addresses are assigned to the individual control motors in this case. Basic setting using the VAS diagnostic tester can only be carried out following addressing. Addressing must be carried out each time after a control motor has been exchanged.53 Heating and Air ConditioningBlower moduleThe Touareg 2011 is equipped with a blower module. The module consists of a combination of a blower regulation motor and a blower regulation sender. The components can only be exchanged together. Two different modules are available. One blower module is fitted with both front Climatronic variants and the other with the rear 4-zone Climatronic system.SensorsThe majority of the Climatronic sensors in the Touareg 2011 correspond to those fitted in the Touareg 2003. The humidity sender G355 is new in the Touareg 2011.Humidity sender G355The humidity sender G355 for windscreen moisture and temperature is intended to prevent windscreen fogging. Window fogging occurs on negative deviation from the dew point temperature, in the case of environmental conditions involving high humidity in the passenger compartment and a low ambient temperature. For this purpose, the air’s moisture content and the temperature directly at the windscreen are measured.Sender detection rangeWindscreenG355Air mixingDefrost vent In dash panelS449_111The humidity and the temperature at the windscreen are measured using a capacitive thin-layer sensor. The humidity sender G355 for windscreen moisture and temperature functions in the manner similar to a plate capacitor; measurement of the capacity reveals the degree of humidity. The sensor electronics convert the measured capacity into a voltage value. The temperature of the windscreen is determined directly by attaching the humidity sender G355 with the windscreen.Signal use The signal is transmitted to the onboard supply control unit via a LIN bus, and is forwarded to the Climatronic control unit via the convenience CAN. The Climatronic system controls the supply of air to the windscreen so that fogging is reduced.Effect in the event of failure Without the sensor's signal, the control unit is no longer able to calculate the point in time from which moisture settles on the windows. The automatic defrost function fails.54 Hybrid air conditioner compressorDue to its connection to the high-voltage system, the electric air conditioner compressor can also be operated, in driving mode, when the combustion engine has come to a stop. If the high-voltage battery's charge falls below a defined limit value in this case, the system automatically starts the combustion engine. The air conditioner compressor in the Touareg Hybrid is supplied with 288 V DC voltage. The compressor contains a DC/AC inverter, which converts the direct current into alternating current in order to operate the asynchronous AC current motor.S449_073The air conditioner compressor is connected to the power electronics via a 2 x 4 mm² cable. This is also the location of the high-voltage system's protection in the form of a 30 A fuse. This cannot be renewed. The connector is mechanically coded, and cables are colour-coded in orange. On removal of the connector, the pilot line routed in the cable is interrupted, and the high-voltage system is therefore shut-off.When working on the air conditioner compressor, the high-voltage system's voltage must be switched off by a Volkswagen high-voltage technician.55 Heating and Air ConditioningTechnical features●●●●●The compressor's delivery rate is regulated via the motor speed of the air conditioner compressor's electric drive in stages of 50 rpm. The rotational speed range lies between 0 and 8600 rpm, and is regulated via the air conditioner control unit. In order to reduce operating noise, the rotational speed of the electronic air conditioner compressor is reduced to a minimum when stationary. The compressor has a mean electrical power consumption of approx. 1.5 kW; its maximum electrical power consumption is approx. 7 kW. The heat incurred due to the inverter and the motor coils is dissipated via the through-flow of the refrigerant return line (intake side). The compressor complies with protection class IP 67 (protected against access to dangerous parts with wire and dust-proof, against the effect of being temporarily immersed in water)S449_006CommunicationThe air conditioner compressor is connected to the powertrain CAN/extended CAN, (deactivatable CAN, as the AC compressor lies in the crash area.) As feedback to the air conditioner control unit, the electronic compressor transmits the following data: Actual rotational speed Current consumption (0-25 A) Component temperature (inverter PCB) Status messages on internal communication, current, voltage and load monitoring.The diagnostic address in the VAS diagnostic tester is: 040In the event of a defect, the air conditioner compressor can only be exchanged completely.56 FunctionThe air conditioner compressor is a so-called "scroll compressor". In a scroll compressor, compression takes place between two scroll elements. These elements are two nested spirals, one of which is stationary and the second of which is moved in circles in the first. Due to this movement, the spirals form several increasingly smaller chambers within the coils. In these chambers, the material which is to be compressed reaches the centre, where it then emerges at the side.S449_064 Moving scroll element Stationary scroll element Refrigerant inlet Refrigerant outletStationary scroll elementRefrigerant inletIntakeMoving scroll elementCompressionRefrigerant outletOutputS449_06057 Heating and Air ConditioningThermal management systemThe heat exchanger for the interior heating is also connected to the innovative thermal management system. In the case of low ambient temperatures of e.g. 0°C and a desired temperature setting of 22°C in the interior, the heating is only provided with "warm coolant" when the coolant temperature is at least 20°C. This process takes approx. 60 seconds, upto a maximum of 120 seconds. During this period of time, the vehicle is driven with "stationary water". This means that the water pump is not in operation and no coolant circulation is yet taking place. This has the advantage that the coolant is able to heat up faster. Once coolant shut-off valve N82 has opened the coolant access to the heat exchanger, all of the heated coolant is initially used to heat the interior. Depending on the interior temperature, the heat output is gradually reduced by the air conditioner control unit.Electronic water pumpShut-off valve for ATF heat exchangerShut-off valve for heater heat exchangerMain radiatorCylinder head ATF heat exchanger Engine block Heater heat exchangerEngageable water pumpCoolant circuit changeover valveS449_008 Thermostat58 Notes59 449© VOLKSWAGEN AG, Wolfsburg All rights and rights to make technical alterations reserved. 000.2812.29.20 Technical status 04.2010 Volkswagen AG After Sales Qualifizierung Service Training VSQ-1 Brieffach 1995 D-38436 Wolfsburg❀ This paper was manufactured from pulp bleached without the use of chlorine.