TECHNICAL DOCUMENTATION
SSP 498 Innovative Thermal Management

This PDF is currently unavailable.
Read document text
Service TrainingSelf-study programme 497Innovative Thermal Management Design and functionThe thermal behaviour of combustion engines has been an issue since the invention of the motor vehicle. On the one hand, the engine together with its fluids needs to be brought up to operating temperature quickly and, on the other, it needs to be cooled once it reaches high operating temperatures. In addition to this, the vehicle occupants require heat. Vehicles need clever thermal management systems to meet these thermal requirements. The innovative thermal management system (ITM) is an intelligent cold start and warm-up program for the engine and gearbox. Thanks to the specific control of the coolant flows, it allows the engine and the gearbox to reach their operating temperatures quicker for optimum fuel consumption and also the interior to be heated more quickly.In brief, the following advantages are achieved thanks to the optimised thermal behaviour: • fuel consumption reduced by up to 0.3l per 100km • interior is heated more quickly • engine warms up more quickly • gearbox warms up more quickly In the first development stage, the ITM was already used in the Touareg Hybrid and is described in selfstudy programme no. 452. It is also used in the 4.2l V8 TDI engine. Further information on the ITM in this engine can be found in self-study programme no. 467. The ITM is used to its maximum in the 3.6l V6 FSI engine (engine code CGRA) and will be explained in more detail in this self-study programme.S497_001The self-study programme shows the design and function of new developments. The contents will not be updated.For current testing, adjustment and repair instructions, refer to the relevantImportant Note2ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4The ITM System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Cooling Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Function Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Test Yourself. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293IntroductionCooling systemWhile an internal combustion engine is running, only about one third of the energy released from the fuel is converted into mechanical energy for propelling the vehicle. The other two thirds are released in the form of heat. Of that, around half leaves the engine with the exhaust gases. The remainder (approx. 33%) is absorbed by the engine cooling system and dissipated.Energy from fuelHeat that is absorbed by the cooling system. RadiationExhaust gasS497_002Useful engine work at the crankshaftThe efficiency of an internal combustion engine is limited by the mechanical friction resistances of the moving parts. In addition, there are losses in the gearbox that make it impossible to use all of the energy provided by the fuel. The engine and gearbox oil reduce the friction considerably, but have the characteristic that they only provide the optimum viscosity for this once they are in a heated state. Also the properties of the materials used like cast and forged iron and aluminium require a certain temperature to reach the optimum operating point. A cold engine that has just been started with a cold gearbox therefore requires more fuel for the same output than an engine and gearbox at operating temperature. The cooling system of an internal combustion engine therefore has three tasks: • • • to absorb the heat produced during combustion and dissipate it into the environment. to help the engine warm up. to heat the interior.4Cooling the engine - basicsThe temperatures (up to 2,000 °C) produced when the fuel combusts are harmful for operation of the engine. It is therefore cooled to "operating temperature". In air cooling (by means of airstream or fan), the excess heat is transferred directly to the surrounding air. The cylinders and the cylinder heads are mostly cast from light metal alloys and have cooling fins to improve their heat conductivity.Thermosyphon cooling an automatic circulation cooling systemS497_040 From 1910In thermosyphon cooling, the cylinders and cylinder head have double walls. The space between the walls is filled with a liquid, for example, water, and is configured so that a coolant circuit is formed. This thermal circulation cooling system is based on the fact that hot water has a lower density than cold water. The heated water therefore rises inside the cylinder water jacket and colder water flows from below out of the radiator. In later versions, the circulation of coolant was speeded up by a coolant pump. This solution has the following weaknesses: long warm-up time low engine temperature during the cold seasons higher CO2 emissionsS497_044 The circulation of coolant is speeded up by a coolant pump.Closed system6 3Today's cooling systems are closed systems with the following components: S497_0582 1 4 7Coolant pump (1) Temperature sender (2) Coolant expansion tank (3) Thermostat (4) Radiator (5) Heat exchanger for heater (6) Engine oil cooler (7)55IntroductionInnovative Thermal Management (ITM)General informationThermal management generally refers to the specific control of the flow of heat in the vehicle. Control of the coolant plays a central role. Due to its property as a heat carrier, it can be used not only to absorb heat at a source of heat ("cooling"), but also to dissipate heat again at a heat sink ("heating"). Heat exchangers allow the heat to be transferred.ITM tasksThe innovative thermal management system has two tasks: • • controlling the flow of heat while the engine is warming up cooling the engine once it has reached operating temperatureControlling the flow of heat during warm-up Since many car journeys are shorter than 15 kilometres, an intelligent cold start and warm-up programme is very important. The ITM is intended, above all, to improve the cold start performance. At low outside temperatures in particular, the heat requirement for the engine and gearbox components have to compete with the heat requirement of the interior heating. The ITM takes care of the inadequate heat management. The heat produced during combustion is distributed optimally between the engine and gearbox oil as well as the interior. This allows the engine and gearbox to reach their ideal operating temperature more quickly. The comfort in the passenger cell, i.e. the interior heating output, needs to be balanced against this.Cooling once operating temperature has been reached Once the engine has reached its operating temperature, cooling is necessary to prevent the maximum permitted component temperature being exceeded. Protection of components must be ensured. The surplus heat needs to be removed from the vehicle via the cooling components. In heating operation, the ITM supports distribution of the surplus heat.The innovative thermal management system will be used in further engines.6The ITM SystemNetworkingThe ITM system is a software application in the engine control unit that is also known as the ITM thermal manager. It forms a network between the engine, gearbox and air-conditioning control units along with their sensors and actuators. This newly developed software is used for optimum distribution of the available engine heat while taking the heating and cooling requirements of the interior, engine and gearbox into account. The air-conditioning and gearbox control units signal their heating requirements to the ITM thermal manager in the engine control unit. The requirements are then weighted together with further input variables, for example, the coolant temperature in the cylinder head and the engine heat requirements calculated by the engine control unit. On the basis of this, the ITM thermal manager then sends commands to the corresponding control units, which then actuate the valves as required. The pumps are activated directly by the engine control unit.Coolant regulating valve N515 operates the on-demand coolant pumpCoolant valve for cylinder block N545 operates the cylinder block shut-off valveHeating/cooling requirement Engine control unit Switching command for cooling oil valve ITM (thermal management)Heating requirementGearbox control unitSwitching command for coolant shut-off valveAirconditioning control unitCooling oil valve N471 operates the shut-off valve for gearbox oil heat exchangerCoolant circulation pump 2 V178Coolant shut-off valve N82S497_0067Cooling CircuitDesignThe following schematic diagram and the overview of locations show the coolant circuit for the 3.6l V6 FSI engine.Schematic diagram20 20 14 13 9 8 10 7 15 12 4 19 18 1711162 5163S497_022Key1 2 3 4 5 6 7 8 9 On-demand coolant pump + coolant regulating valve N515 Thermostat Coolant temperature sender G62 Temperature sender for engine temperature regulation G694 Main radiator Engine oil cooler Coolant circulation pump 2 V178 Coolant shut-off valve? N82 Heat exchanger for heater 11 Gearbox oil heat exchanger 12 Non-return valve for cylinder head circuit 13 Shut-off valve for cylinder block + coolant valve for cylinder block N545 14 Coolant expansion tank 15 Engine control unit J623 16 Automatic gearbox control unit J217 17 Climatronic control unit J255 18 Cylinder block 19 Cylinder head 20 Non-return valve for coolant return10 Shut-off valve for gearbox oil heat exchanger + cooling oil valve N471Numbers 6 and 11 are coolers that exchange the heat between oil and water. Numbers 5 and 9 are coolers that exchange heat between air and water.8LocationsKey13 1 14 6 9 2 3 4 5 6 7 8 10 2 11 3 5 1 4 S497_063 9 On-demand coolant pump Coolant regulating valve N515 Coolant temperature sender G62 Temperature sender for engine temperature regulation G694 Engine oil cooler Coolant circulation pump 2 V178 Shut-off valve for gearbox oil heat exchanger Cooling oil valve N471 Gearbox oil heat exchanger10 Non-return valve for cylinder head circuit 11 Shut-off valve for cylinder block 12 Coolant valve for cylinder block N545 13 Coolant expansion tank 14 Non-return valve for coolant return1211 8 9 6 7 13S497_0619Cooling CircuitComponentsOn-demand coolant pumpTaskThe coolant pump is constantly driven by the belt drive. As a result, it pumps coolant through the coolant circuit ensuring a sufficient movement of heat to the heat exchangers. The engine should reach its operating temperature as quickly as possible during cold start and warm-up. Therefore the coolant pump is switched off by a shutter that is operated by the vacuum system. The coolant in the engine is then stationary and is heated faster.S497_066 Coolant regulating valve N515 On-demand coolant pumpHow it worksCoolant pump is "switched on": If the coolant temperature is less than -15 °C or greater than 75 °C, the coolant pump is "switched on". As in the case of a conventional coolant pump, the coolant is pumped to the cylinder block and the cylinder head.Coolant delivery flow to the cylinder block and the cylinder headS497_060 Impeller deliversThe coolant pump is "switched on and off" not just depending on the temperature. The engine torque and speed also play a part.10Vacuum line from coolant regulating valve N515 Diaphragm Limit stop Rod linkageCoolant pump is "switched off": If the coolant temperature is between -15 °C and 75 °C when the engine is started, the coolant pump is "switched off" conditionally. The coolant regulating valve is actuated by the engine control unit and opens the path for the vacuum. The diaphragm is pulled to the right by the vacuum. As the shutter and the diaphragm are linked together via a rod, the shutter is pushed over the impeller until it reaches the stop limit. The flow of coolant is stopped by the shutter. Coolant is no longer delivered (see also subsection "Stationary coolant").S497_062 Shutter ImpellerImpeller deliversCoolant pump is "pulsed": The coolant pump is activated at a cylinder head temperature of approx. 75 °C. The coolant regulating valve is activated several times (mixed phase) to reactivate the coolant pump. This opens and closes the coolant pump shutter intermittently. This ensures that the cold coolant from the cylinder block is mixed slowly with the hot coolant from the cylinder head. Coolant pump delivers: When the coolant regulating valve is no longer actuated, the vacuum is dissipated and the spring pushes the shutter back to its initial position. The impeller is released again and delivers the coolant in the direction of the engine.SpringS497_064 Shutter is pushed back by the spring11Cooling CircuitCoolant circulation pump 2 V178Coolant circultation pump 2 V178 is electronically regulated by means of pulse-width modulation (PWM).DesignThe design of coolant circulation pump 2 corresponds with a centrifugal pump. The following components are integrated into the pump module: - Centrifugal pump - Electric motor - Electronic control The electrical connection for the coolant circulation pump 2 has three pins: - Terminal 31 - Battery voltage from terminal 87a - PWM signal from engine control unitCoolant circulation pump 2 V178S497_046How it worksIf the coolant in the cylinder block is stationary (see "Stationary coolant" sub-function), the coolant circulation pump 2 allows hot coolant to be pumped from the cylinder head to the heat exchanger for the heater. This means that the cylinder head cooling circuit forms a separate circuit with its own pump when the main circuit is deactivated. The cylinder head can therefore be cooled and the heat exchanger for the heater supplied with warm coolant without the cylinder block being cooled. If the coolant pump is delivering, but the shut-off valve for cylinder block is still closed, the coolant circulation pump 2 allows hot coolant to be delivered to the gearbox oil heat exchanger and, depending on the heating requirement, to the heat exchanger for the heater (see sub-function "Gearbox oil heating"). Furthermore the coolant circulation pump 2 supports the coolant pump for the interior heating when the engine is warm and running below 1,240rpm.12The valves and their functionsShut-off valve for gearbox oil heat exchanger and cooling oil valve N471Shut-off valve for gearbox oil heat exchangerReturn Gearbox oil heat exchangerThe cooling oil valve N471 is a solenoid changeover valve. It controls the vacuum supply to the shut-off valve for the gearbox oil heat exchanger, which is a pneumatic valve. These two valves interrupt the flow of coolant or allow coolant to flow through the gearbox oil heat exchanger.S497_084SupplyCooling oil valve N471How it works De-energised When no current is supplied, the cooling oil valve N471 closes the vacuum line to the shut-off valve for the gearbox oil heat exchanger. The coolant line to the gearbox oil heat exchanger is opened by the shutoff valve for the gearbox oil heat exchanger. Energised If the coolant valve for gearbox N488 is energised, it opens the vacuum line to the shut-off valve for the gearbox oil heat exchanger. The vacuum then causes the shut-off valve for the gearbox oil heat exchanger to close the coolant line to the gearbox oil heat exchanger.121233S497_072S497_070Key1 2 3 Engine control unit J623 Cooling oil valve N471 Shut-off valve for gearbox oil heat exchanger13Cooling CircuitShut-off valve for cylinder block and coolant valve for cylinder block N545The coolant valve for cylinder block N545 is a solenoid changeover valve. It controls the vacuum supply to the shut-off valve for cylinder block, which is a pneumatic valve. These two valves are used to interrupt the flow of coolant from the coolant circulation pump 2 V178 to the cylinder block and thus stop the supply of cold coolant to the cylinder block during the warm-up phase. How it works These valves work in exactly the same way as the coolant valve for gearbox N488 and the shut-off valve for gearbox oil heat exchanger.Shut-off valve for cylinder blockCoolant valve for cylinder block N545ReturnSupplyS497_086Coolant shut-off valve N82The coolant shut-off valve N82 is fitted in the wheel housing on the left in the direction of travel. This valve is operated by an electric motor. It contains a small electric motor that moves the shut-off plunger via a worm gear. This valve allows or interrupts the flow of coolant through the heat exchanger for heater.S497_048S497_05014Cylinder head circuit non-return valveDuring normal operation, i.e. when the engine has reached operating temperature and the shut-off valve for cylinder block (13) is open, the non-return valve in the cylinder head circuit (12) prevents coolant flowing directly from the cylinder head connection at the front to the on-demand coolant pump (1). This ensures that coolant flows through the cylinder head circuit.Impermissible coolant flow (without non-return valve)Permissible coolant flow (with non-return valve)13131211S497_094S497_096Non-return valve for coolant returnThe non-return valves in the coolant return to the coolant expansion tank prevent the coolant circulation pump 2 V178 drawing air from the coolant expansion tank into the cooling system.Coolant temperature sender G62This temperature sender measures the coolant temperature at the engine coolant outlet. The temperature information is used to regulate the coolant temperature in the coolant circuit (i.e. activation of the radiator fan).Temperature sender for engine temperature regulation G694This temperature sender is fitted in the cylinder head close to the combustion chamber and measures the coolant temperature. The temperature information is used to control the heating phase of the engine and to prevent the coolant boiling during the "Stationary coolant" sub-function.15FunctionThis chapter is divided into two sections in order to explain the innovative thermal management functions better. The section "ITM sub-functions" explains the four basic functions. The section "Warm-up strategy" describes the procedure for the warm-up program as well as the interaction of the sub-functions during this process.ITM sub-functionsThe innovative thermal management (ITM) can be sub-divided into four sub-functions: Sub-function 1 - Stationary coolant Sub-function 2 - Autarkic heating Sub-function 3 - Gearbox oil heating Sub-function 4 - Separation of interior heating circuit These four basic functions each relate to a separate sub-system of the complete vehicle. Therefore you can assign - "gearbox oil heating" to the gearbox, - the "separation of interior heating" as well as "autarkic heating" to the heating/air-conditioning system and - "stationary coolant" to the engine. The sub-functions can also be active independently of each other. All four sub-functions are implemented in the 3.6l V6 FSI engine. Therefore, in the following section, the subfunctions will be explained in more detail using the coolant circuit of that engine as an example.If the engine is started with a coolant temperature less than -15 °C, the ITM will work with limitations. The sub-functions 1 and 2 will be deactivated and the shut-off valve for cylinder block will not be closed.16Sub-function 1 - Stationary coolantTaskThis function serves to warm-up the engine quickly. Deactivating the coolant circuit prevents circulation of coolant through the whole engine. The stationary coolant is achieved with the on-demand coolant pump.How it worksIf the coolant temperature is between -15 °C and 75 °C when the engine is started, the engine control unit activates the coolant pump. The shutter is pushed over the impeller and the flow of coolant is interrupted by the shutter. This stops the flow of coolant and shortens the warm-up time of the whole engine (see also description of how the ondemand coolant pump works on page 11).154 119 18S497_020Key1 4 On-demand coolant pump Temperature sender for engine temperature regulation G69415 Engine control unit J623 18 Cylinder block 19 Cylinder head17FunctionSub-function 2 - Autarkic heatingTaskThis function serves to quickly heat the vehicle interior according to the occupants' heating requirements. The heat from the cylinder head is used for the heat exchanger in this case.How it worksA vehicle occupant sets the heating requirement via the air-conditioning controls. The Climatronic control unit assigns this heating requirement to one of the following four stages: - Stage 0 = maximum heating requirement or defrost request - Stage 1 = medium heating requirement - Stage 2 = low heating requirement - Stage 3 = no heating requirement Sub-function 2 - Autarkic heating is implemented for interior heating requirement stages 0 to 2. Coolant circulation pump 2 is activated by the engine control unit once a set temperature threshold has been reached in the cylinder head. At the same time, the Climatronic control unit opens the coolant shut-off valve N82 after a switching command from the engine control unit. This enables an autarkic flow of coolant through the cylinder head and the heat exchanger for heater while the coolant in the cylinder block continues to be stationary.98 177154 119 18S497_024Key1 4 7 8 9 On-demand coolant pump Temperature sender for engine temperature regulation G694 Coolant circulation pump 2 V178 Coolant shut-off valve N82 Heat exchanger for heater 15 Engine control unit J623 17 Climatronic control unit J255 18 Cylinder block 19 Cylinder head18Sub-function 3 - Gearbox oil heatingTaskThis function ensures that the gearbox is warmed up quickly by activating the gearbox oil heat exchanger. This means that the gear oil can be specifically heated up by the hotter coolant.How it worksIf the coolant is in a suitable temperature range (from approx. 82°C cylinder head temperature) and the coolant is warmer than the gearbox oil, sub-function 3 - Gearbox oil heating is possible. Depending on the gearbox heating requirement, the gearbox control unit opens the shut-off valve for the gearbox oil heat exchanger upon receiving the switching command from the engine control unit. Coolant can then flow through the gearbox oil heat exchanger. In this way, the coolant heated in the cylinder head is sent to the gearbox. The Climatronic control unit also has an influence on this sub-function. "Gearbox oil heating" (as described above) is possible for an interior heating requirement in stages 1 to 3. However, at maximum interior heating requirement in stage 0, the shut-off valve for the gearbox oil heat exchanger must be closed. This requirement is forwarded from the air-conditioning control unit via the engine control unit to the gearbox control unit. All of the hot coolant then flows through the heat exchanger for the heater.98 17 16 7 1511104 1S497_034Key1 4 7 8 9 On-demand coolant pump Temperature sender for engine temperature regulation G694 Coolant circulation pump 2 V178 Coolant shut-off valve N82 Heat exchanger for heater 10 Shut-off valve for gearbox oil heat exchanger 11 Gearbox oil heat exchanger 15 Engine control unit J623 16 Automatic gearbox control unit J217 17 Climatronic control unit J25519FunctionSub-function 4 - Separation of interior heating circuitTaskIf no heating requirement is signalled by the Climatronic control unit (i.e. stage 3), the warm-up phase of the engine can be reduced further by disconnecting the heat exchanger for the heater.How it worksIf there is no heating requirement, the Climatronic control unit closes the coolant shut-off valve upon receiving the command from the engine control unit. As a result, no heated coolant reaches the heat exchanger for heater. All of the heated coolant (from approx. 82°C·cylinder head temperature)·then flows through the gearbox oil heat exchanger.98 171110 7 151S497_030Key1 7 8 9 On-demand coolant pump Coolant circulation pump 2 V178 Coolant shut-off valve N82 Heat exchanger for heater 11 Gearbox oil heat exchanger 15 Engine control unit J623 17 Climatronic control unit J25510 Shut-off valve for gearbox oil heat exchanger20Warm-up strategyThe warm-up strategy depends on many factors (for example, heating requirement, engine speed, torque, summer or winter operation).Basic strategy (winter operation)Phase 1 The "Stationary coolant" sub-function initially ensures that the cylinder block warms up quickly after engine start.S497_0528719Phase 2 When a heating requirement is set on the airconditioning system, the heat output from the cylinder head (19) is initially activated with coolant circulation pump 2 (7) (cylinder head circuit). At the same time, the "Autarkic heating" sub-function becomes active due to the coolant shut-off valve (8) being opened. The flow of coolant in the cylinder block is then switched off by the "Stationary coolant" sub-function.S497_05419 1 18Phase 3 The coolant pump (1) is activated at a cylinder head temperature of approx. 75 °C. During the transition phase, the coolant pump is pulsed, i.e. the shutter in the coolant pump is opened and closed intermittently, to balance the coolant temperatures in the cylinder block (18) and in the cylinder head (19). After that, the coolant pump delivers constantly.S497_05621FunctionPhase 4 Next, the gearbox oil is heated via the gearbox oil heat exchanger (11) ("Gearbox oil heating" subfunction). Since the shut-off valve for cylinder block (13) is still closed, the coolant circulation pump 2 (7) enables the hot coolant to be delivered to the gearbox oil heat exchanger (11) as well as to the heat exchanger for the heater (9) depending on the interior heating requirement.9 13 11 7S497_088Phase 5 The shut-off valve for cylinder block (13) is opened once the engine reaches operating temperature (approx. 87 °C). Warm-up is completed. In this operating mode, the output of the coolant pump (1) is normally sufficient to meet the heating requirements without the support of the coolant circulation pump 2 (7). Support is only provided by the coolant circulation pump 2 while the coolant pump is running at engine speeds below 1,240rpm.13 71S497_090Phase 6 Over the further course of the engine warm-up, the thermostat (2) opens the large coolant circuit with the main radiator (5) at a temperature of 89 °C. This prevents components overheating. Once the gearbox has reached operating temperature, gearbox oil heating is ended again by closing the shut-off valve for the gearbox oil heat exchanger (10).2105S497_09222Warm-up graphs (winter operation)The following graphs show the influence of the ITM on the coolant temperature and on the gearbox oil temperature while the engine warms up.100 90 80 70 Temperature [°C] 60 50 40 30 20 10 0 0 200 400 600 Time [s] 800 1000 S497_010Key= Coolant temperature with ITM = Coolant temperature without ITM = Gearbox oil temperature with ITM = Gearbox oil temperature without ITM = Cold start with ITM = Engine warm = Phase 1 = Phase 2 = Phase 3 = Phase 4 = Phase 5 = Phase 6 = Coolant circulation pump 2 is activated as required with pulse-width modulation.= The coolant pump is pulsed.23FunctionBasic strategy (summer operation)Phase 1 The "Stationary coolant" sub-function initially ensures that the cylinder block warms up quickly after engine start.S497_028Phase 2 Since there is no heating requirement, the "Autarkic heating" sub-function is not active.Phase 3 The coolant pump (1) is activated at a cylinder head temperature of approx. 75 °C. During the transition phase, the coolant pump is pulsed, i.e. the shutter in the coolant pump is opened and closed intermittently, to balance the coolant temperatures in the cylinder block (18) and in the cylinder head (19). After that, the coolant pump delivers constantly.1S497_0762413 11 7Phase 4 Next, the gearbox oil is heated via the gearbox oil heat exchanger (11) ("Gearbox oil heating" subfunction). Since the shut-off valve for cylinder block (13) is still closed, the coolant circulation pump 2 (7) enables the hot coolant to be delivered to the gearbox oil heat exchanger.S497_07813Phase 5 The shut-off valve for cylinder block (13) is opened once the engine reaches operating temperature (approx. 87 °C). Warm-up is completed.1S497_080102Phase 6 Over the further course of the engine warm-up, the thermostat (2) opens the large coolant circuit with the main radiator (5) at a temperature of 89 °C. This prevents components overheating. Since there is no heating requirement, the shut-off valve for the gearbox oil heat exchanger (10) also remains open after the gearbox reaches operating temperature to ensure that coolant flows through the cylinder head.5S497_08225System OverviewSensorsCoolant temperature sender G62Temperature sender for engine temperature regulation G694Engine control unit J623Engine speed sender G28Air mass meter G70 with intake air temperature sender G42Automatic gearbox control unit J217Gearbox oil temperature sender G9326ActuatorsCoolant valve for cylinder block N545Coolant regulating valve N515Coolant circulation pump 2 V178Climatronic control unit J255Coolant shut-off valve N82Cooling oil valve N471S497_21627Function MatrixThe ITM functions have different characteristics depending on the engine in question. The following the table shows which of the four sub-functions are implemented in the engines featuring ITM.Stationary coolantAutarkic heatingGearbox oil heatingSeparation of interior heating circuit No1.2l 77kW TSI engine 3.6l 206kW V6 FSI engine 4.2l 265 kW V8 FSI engine 3.0l 176kW V6 TDI engine 4.2l 250kW V8 TDI engine 3.0l 245kW V6 TSI engine (hybrid) 3.0l 180kW V6 TDI engine (W36 - generation 2)YesNoNoYesYesYesYesYesNoYesYesNoNoYesYesYesNoYesYesYesNoYesYesYesYesYesYesPlease note that there may be different, country-specific ITM systems for the engines.28Test YourselfWhich answers are correct?One or several of the given answers may be correct. 1. What do you understand by innovative thermal management (ITM)?❒ ❒ ❒a) The airstream is directed at hot engine components. b) The specific control of the flow of heat in the vehicle. c) The ITM is a thermal management system similar to an auxiliary heater.2. Where is the ITM thermal manager fitted?❒ ❒ ❒a) The ITM thermal manager is a separate control unit that is networked with the engine control unit on the CAN data bus. b) The ITM thermal manager is a software application that is installed in the gearbox, air-conditioning and engine control unit. c) The ITM thermal manager is a software application in the engine control unit.3. Which phase of the warm-up strategy in winter operation is identical to an ITM sub-function?❒ ❒ ❒ ❒a) Sub-function 1 - Stationary coolant is identical to phase 1 of the warm-up strategy. b) Sub-function 1 - Stationary coolant is identical to phase 2 of the warm-up strategy. c) Sub-function 3 - Gearbox oil heating is identical to phase 5 of the warm-up strategy. d) Phase 2 of the warm-up strategy is identical to sub-function 2 - Autarkic heating.29Test Yourself4. Name the components.20 20 14 13 9 8 10 7 15 12 4 2 5 6 19 1711161183S497_026Key1 2 3 4 5 6 7 8 9 ____________________________________________ ____________________________________________ ____________________________________________ ____________________________________________ ____________________________________________ ____________________________________________ ____________________________________________ ____________________________________________ ____________________________________________ 11 ____________________________________________ 12 ____________________________________________ 13 ____________________________________________ 14 ____________________________________________ 15 ____________________________________________ 16 ____________________________________________ 17 ____________________________________________ 18 ____________________________________________ 19 ____________________________________________ 20 ____________________________________________10 ____________________________________________30❒❒❒❒❒❒5. What function do the four sub-functions of the ITM have in winter operation?6. Why is the coolant pump pulsed when switched on?c) It is a function check for the pump and its components.b) The pump is protected from freezing.a) So that the components are not subjected to any high temperature fluctuations (protection of engine components).c) The sub-functions can only ever be active together and not independently.b) The four sub-functions are identical to the 4 stages of the interior heating requirement.a) The four sub-functions are used to warm up the engine, the interior and the gearbox more quickly.31Answers: 1. b) 2. c) 3. a), d) 4. 1 On-demand coolant pump + coolant regulating valve N515 2 Thermostat 3 Coolant temperature sender G62 4 Temperature sender for engine temperature regulation G694 5 Main radiator 6 Engine oil cooler 7 Coolant circulation pump 2 V178 8 Coolant shut-off valve N82 9 Heat exchanger for heater 10Shut-off valve for gearbox oil heat exchanger + cooling oil valve N471 11Gearbox oil heat exchanger 12Non-return valve for cylinder head circuit 13Shut-off valve for cylinder block + coolant valve for cylinder block N545 14Coolant expansion tank 15Engine control unit J623 16Automatic gearbox control unit J217 17Climatronic control unit J255 18Cylinder block 19Cylinder head 20Coolant return non-return valve 5. a) 6. a)497 497© VOLKSWAGEN AG, Wolfsburg All rights reserved. Subject to technical modification. 000.2812.54.20 Technical status 06/2011 Volkswagen AG After Sales Training Service Training VSQ-1 Brieffach 1995 D-38436 Wolfsburg This paper has been manufactured from pulp bleached without the use of chlorine.