TECHNICAL DOCUMENTATION
SSP 500 The up

This PDF is currently unavailable.
Read document text
Service TrainingSelf-study programme 500The up!The up! – a major player in the compact class With the up! as the entry level model, a completely new vehicle has been developed. Having satisfied the highest safety and quality standards, the up! is characterised by its compact outer dimensions which allow use of the interior space to be maximised, a new engine generation available in two versions, a clean, powerful design and new technical details. The new three-cylinder petrol engine has a power output of 44 kW or 55 kW. It is also available in a version featuring BlueMotion technology with the start/stop system. This generation of engines will be employing a 50 kW natural gas engine at a later stage. The engines are combined with the new weight and space optimised 5-speed manual or automated manual gearbox. The city emergency braking function, available as an option, is activated at speeds below 30 km/h and uses a laser sensor to detect vehicles travelling in front. When the need arises, it automatically initiates a braking manoeuvre and can contribute to preventing an imminent front-end collision or minimise the damage one causes. The optional navigation and infotainment system “maps + more” has been especially developed for the up! It supports the Radio function, while also including functions for Navigation, Phone and Car Info. The fixture for securing the mobile device on the dash panel ensures absolute ease of operation, forming the interface to the vehicle. The passenger compartment captivates with its logical operating concept, providing an optimal view of the control elements, a storage concept and a boot with a volume of 251 litres.s500_001The self-study programme presents the design and function of new developments! The content will not be updated.Current testing, setting and repair instructions can be found in the provided service literature.Important note2ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Occupant Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Power Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Running Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Heating and Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Convenience Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Infotainment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333IntroductionThe Bratislava production siteProduction of the up!, the new compact car, was launched in August 2011. Production is being carried out in the Bratislava plant in Slovakia, which already produces vehicle models for Volkswagen, Skoda, Seat, Audi, bodies for Porsche, and gearboxes.WolfsburgBratislavas500_0024Overview of equipment featuresThe overview shows you a range of standard and optional equipment for the new up! The range of options builds on the standard equipment “take up!” to form the “move up!” equipment line as well as the “high up!”. These may vary from country to country.Here is some of the equipment featured in the up!: • • • • • • • • • • • • Automatic flashing brake lights in the event of hard braking Electronic stabilisation program ESP incl. ABS and ASR Head and side airbags combined at the front Electromechanical power steering City emergency braking function, optional Manual air conditioning system, optional RCD 215 radio system, optional Navigation and infotainment system “maps + more”, optional up! boxes – innovative collapsible portable boxes available in the three versions: travel box, city box and kid box, all optional Automated manual gearbox, optional Tilting panorama sunroof, optional Four doors with rear vent windows, optionals500_0035IntroductionTechnical dataExterior dimensions and weightsThe data refers to a vehicle without driver, with the fuel tank 90% full, standard equipment, a 1.0 l, 44 kW MPI petrol engine and tyre size 165/70 R14.585 mm2420 mm 3540 mm535 mm1478 mm1428 mm 1641 mm1424 mm 1910 mm s500_010Exterior dimensionsLength Width Height Wheelbase Track width at front Track width at rear 3540 mm 1641 mm 1478 mm 2420 mm 1428 mm 1424 mmWeights/further dataGross vehicle weight rating Kerb weight Turning circle Tank capacity Drag coefficient 1290 kg 854 kg 9.8 m 35 litres 0.32 cd6Interior dimensions and volumes1000 m m1613 mm769 mm1990 mm570 mm947 mm868 mm s500_012Interior dimensions and volumesInterior length Luggage compartment volume Height of open rear lid Height of load sill Height of luggage compartment aperture Width of luggage compartment aperture 1613 mm 251 litres 1990 mm 769 mm 570 mm 868 mm Front headroom Headroom – 2nd seat row Knee room – 2nd seat row 1000 mm 947 mm **Sufficient knee room can only be obtained by reducing the knee room of the first seat row.7BodyBody structureThe key focus during development of the body structure was combining high crash safety with a low body weight. The platform and top are completely new designs. Due to the compact structure, there was no need for a high proportion of hot formed steels.s500_017Strengths of steel sheetsSoft steel sheet metal 350 MPa Strengthened steel sheet metal 300-590 MPa Modern strengthened steel sheet metal 500-980 MPa Ultra-strengthened hot formed steel sheet metal 1400 MPaThe hot-formed steels increase the rigidity of the passenger compartment. Additional crash reinforcement has been installed in the sills of both doors. In the event of a head-on collision, the forces are distributed through the entire body via both longitudinal members.s500_0678DoorsThe doors on both the 2-door and 4-door models are assembled in an individual part installation process. The installation parts for the doors are fitted through the assembly opening. The assembly opening is sealed by a plastic cover.Assembly openingPlastic covers500_042Push-pull lockingPush-pull locking is a mechanical locking system. Pushing the inside door button in the direction of the arrow locks the door. This is indicated by the red marking on the back.s500_008Red marking9BodyBoot lidA special feature of the up! is its boot lid in an all-glass finish. It involves creating a conventional structure comprised of inside, outside and reinforcement parts which are covered by a large glass panel. The panel is bonded to the boot lid.s500_06510Vehicle lightingDaytime driving lights and side lights (W21, 5 W)Front headlightsThe following front lighting functions have been integrated into the headlights of the up!: dipped beam, main beam, turn signals, side lights and daytime driving lights. The bulbs can be changed while the headlights remain installed.s500_004 Dipped beam and main beam (H4, 55/60 W) Turn signal lights (PY, 21 W)Fog lampsThe fog lamps are found in the front spoiler. Partial disassembly of the wheel housing trim is required to replace the bulbs.Fog lamps (HB4, 55 W)s500_069Tail light and brake light (P21, 4 W) Turn signal (RY, 10 W) Tail light (P21, 4 W)Tail lightsThe rear lights have been designed as one unit. The tail light, brake light, turn signal, rear fog light and a reversing light for both sides are all integrated into this unit. The lights have to be removed in order to change the bulbs. The light cluster is secured using a central wing nut.Reversing light (R, 10 W)Tail light and rear fog lamp (P21, 4 W)s500_00611BodyInteriorFront seatsThree types of seat are available in the up! according to the equipment line featured. - no Easy entry - Easy entry - Easy entry and memory function The equipment lines “take up!”, “move up!” and “high up!” are distinguished by the different seat covers and finishings. The head restraints are fixed to the front seats in all equipment lines.s500_031Rear bench seat systemThe up! has a one-piece, folding rear seat bench as standard. With the “move up!” equipment line and above, this is a two-piece version which can be folded at a 60:40 ratio. In conjunction with a variable load floor, both rear seat systems can be folded down to form a virtually flat surface thanks to a raised pivoting point.s500_03312Stowage conceptNumerous multifunctional stowage options are provided in the passenger compartment of the up! to provide the passengers with enough storage space for items both large and small.2 4 5163s500_035Key1 The centre console has a storage compartment and a drink holder for bottles of up to 0.5 litres; equipment line “move up!” and above offer fold-out drink holders An open stowage compartment with hooks for bags; equipment line “move up!” and above offer a closed glove box with a pocket for glasses, a pen and pad holder and a coin and map holder on the inside A storage compartment and a drink holder for 1.0-litre bottles in the doors Rear drink holder Shopping bag hooks in the luggage compartment Equipment line “move up! ” and above offer variable load floor23 4 5 613BodyVariable load floorA variable load floor is available as an option. The upper position provides a loading surface virtually level with the loading sill. In addition, there is the option of stowing various objects below the load floor.Upper positions500_066The lower position allows the maximum stowage volume to be exploited. The Z-shaped guide for the load floor makes changing between the two positions very easy.Lower positions500_068 Z-shaped guide14Occupant ProtectionSafety equipmentThe up! features the following safety equipment as standard: • Driver airbag • Front passenger airbag • Side airbags at front • Three-point seat belts for front and rear • Belt pre-tensioners and mechanical belt tension limiters on the front seats • TopTetherCrash sensor in the front moduleSide crash sensor s500_039Belt status displayThe standard belt status display in the multifunction display in the dash panel insert informs the driver whether the rear passengers have fastened their seat belts. There is an additional, acoustic seat belt prompt for the front seats.Crash sensorsIn the middle of the front module there is a crash sensor for early detection of a head-on collision. There is a side crash sensor located in each door for detecting a side collision.15EnginesThe 1.0 l 44/55 kW MPI engine with intake manifold injectionThe 1.0 l 44/55 kW MPI engine is a completely new development, being the first in a new generation of engines. The engine mechanics are the same for both power variants. The differences in power are achieved with the software. Technical features • • • • • Cylinder head with integrated exhaust manifold Thermostat housing forms a unit with the coolant pump Coolant pump driven by the outlet camshaft via a toothed belt Oil filter installed on the oil sump Variable inlet valve timing (42° crankshaft angle)s500_015Technical dataEngine code Type Displacement Bore Stroke Valves per cylinder Compression ratio Max. output Max. torque Engine management Fuel 44 kW at 5,000 rpm CHYA CHYBTorque and performance diagram[Nm] 110 100 90 80 70 60 50 1000 3000 5000 [kW] 60 50 40 30 20 10 0 7000 [rpm]3-cylinder inline engine 999 cm³ 74.5 mm 76.4 mm 4 10.5:1 55 kW at 6,200 rpm95 Nm at 3,000-4,300 rpm Bosch Motronic ME 17.5.20 Super unleaded RON 95 (Unleaded RON 91 with reduced performance) Three-way catalytic converter with one step-type Lambda probe upstream and one downstream EU5s500_040 44 kW 55 kWExhaust gas aftertreatmentExhaust emissions standardYou will find further information in selfstudy programme no. 508 “1.0 l 40/55 kW MPI engine with intake manifold injection.”16Power TransmissionThe 0CF manual gearboxThe market launch of the up! coincides with the introduction of a new Volkswagen 5-speed manual gearbox. This 0CF manual gearbox is characterised by its compact, lightweight design. The development goals successfully achieved include: • • • • greater efficiency a weight reduction achieved by optimising all gearbox components a streamlined design streamlining of the assembly processs500_014Technical dataGearbox designation Gearbox type Installation position Structural length/width Max. input torque Material used for gearbox and clutch housing Gear oil Initial fill/oil change quantity Weight Final drive ratio Gear pairs Gear range Reaches top speed 0CF 5-speed manual gearbox; a two-shaft gearbox with additional reverse gear shaft. Front/transverse installation 356 mm/462 mm 120 Nm Aluminium SAE 75 W as per TL 52527-A 1.2 l/1.1 l 26.7 kg with oil 74:19 (44 kW); 75:18 (55 kW) Identical for 44 kW and 55 kW 4.57 in 4th gearFurther information on the design and functions can be found in self-study programme no. 509 “The 0CF manual gearbox”.17Running GearOverview of running gearThe overview presents the most important standard and optional running gear equipment for the up! The up! can be equipped with normal suspension or sports suspension.•Disc brake, front•McPherson strut front suspension•ESP/ABS TRW 460•Electromechanical power steering C-EPS (column electric power steering)•9" brake servo for left-hand drive vehicles; 8.5" brake servo for right-hand drive vehicles18•City emergency braking function (optional)•Torsion beam rear axles500_021•Tyre mobility set (standard)•Drum brake, rear19Running GearThe electromechanical power steering systemThe electromechanical power steering system provides steering assistance using an electric motor on the steering column. The electromechanical power steering system is compatible with every engine/gearbox combination.The steering is comprised of the following components: Steering wheel Steering column switch Steering column Steering torque sender G269 Worm gear mechanism Electromechanical power steering engine V187 Power steering control unit J500 Universal joint shaft Mechanical steering gearSteering column with height adjustment Power steering control unit J500Electromechanical power steering motor V187Universal joint shaftSteering torque sender G269Worm gear mechanismMechanical steering gears500_020Further information on the design and functions of the electromechanical power steering system can be found in self-study program no. 447 “The Polo 2011”.20The city emergency braking functionThis driver assistance function is being implemented in the compact vehicle segment at Volkswagen for the first time in the up! In the up!, the city emergency braking function is a self-contained system. If a collision with a vehicle travelling in the same direction, or a stationary object, is imminent and the driver has not reacted, the city emergency braking function responds at speeds below 30 km/h and, when required, automatically initiates a braking procedure. Ideally, this function can prevent a front-end collision or help to minimise accident damage. The signals required for the city emergency braking function are relayed by the emergency braking function sensor unit J939.Emergency braking function sensor unit J939The emergency braking function sensor unit J939 is a laser sensor. This is also referred to as a CV sensor (closing velocity). The sensor unit has been integrated into the mirror base and features the following characteristics: It transmits signals using infrared light with a wavelength of 905 nanometres (which cannot be detected by the human eye). It has an aperture angle of 27° horizontal and 12° vertical. It has a range of 10 metres.s500_060 Receiver lensess500_054 Sender lensThe emergency braking function sensor unit is comprises of a sender and a receiver unit. The sender lens has three beams. The receiver unit is comprised of two lenses.Function The emergency braking function sensor unit calculates the distance, speed, and direction of an approaching object in the direction of travel. If the laser signals emitted encounter an object, then they are reflected. A decoder in the sensor unit calculates the distance based on the time between in the outgoing and incoming laser signals.21Running GearButton for emergency braking function E773The button for the emergency braking function E773 is located in the centre console above the gear selector. The city emergency braking function remains active once the engine has been started. The function is activated and deactivated by pressing the button.s500_056s500_058Usage conditions• • • The city emergency braking function responds at speeds not exceeding 30 km/h. It monitors the traffic travelling in front of the vehicle and any obstacles within a range of 10 metres. The city emergency braking function reacts to vehicles moving in the same direction, braking or stopping.System limitations• • The city emergency braking function does not warn the driver in advance. The city emergency braking function does not react to vehicles crossing or approaching from the other direction, nor does it react to road users with weak reflections (such as pedestrians).The city emergency braking function cannot guarantee that it will prevent accidents.22System functionsThe emergency braking function sensor unit monitors the area in front of the vehicle with a range of up to ten metres. Should the time interval to an obstacle decrease so quickly that a front-end collision is imminent, the brake system is prefilled and the Hydraulic Brake Assist system (HBA) switches to “increased sensitivity”. This means that the brakes respond immediately when the driver depresses the brake pedal. If the driver does not brake, or brakes too little, the vehicle can brake at a rate of up to 10 m/s 2 depending on the friction provided by the road surface, the condition of the brakes, and the tyres.The following diagram shows the sequence of events when a risk of collision is detected and the driver does not brake, or brakes too little.Risk of collision slightly higher high at its highest Collisions500_064Prefill, switchover to HBABraking of up to 10 m/s223Heating and Air ConditioningThe up! features a choice of two different heating/air-conditioning concepts: • • The manual heating and ventilation system The manual heating and air conditioning systemEach variant has its own operating unit. All controls used to adjust the temperature and ventilation have been integrated into one operating unit. The up! is equipped with a manual heating and ventilation system as a standard feature.The manual heating and ventilation systemThe temperature flap and the flaps for air distribution are adjusted using rotary knobs on the operating unit. Each adjustment made is relayed to the flap mechanism on the heating and ventilation system via a flexible shaft.Rotary knob for fresh air blowerRotary knob for temperature selectionRotary knob for air distribution s500_048The manual heating and air conditioning systemThe air conditioner is equipped with one flexible shaft each for setting the temperature and activating the air flaps. The temperature and air distribution are set manually, allowing manual adjustment when needed. The manual air conditioner utilises an internally controlled air conditioner compressor with magnetic clutch.AC button with feedback LED Rotary knob for fresh air blowerRotary knob for temperature selectionSlide for recirculated air modeRotary knob for air distributions500_04624Switching on the air conditioning systemThe air conditioner is switched on and off using the AC button. Pressing this button relays the command “Air conditioner on” to the engine control unit. This is achieved by applying a voltage of 7.5 V. When deactivated using the AC button, the command is revoked (voltage level is then 0 V). At air blower level 0, no AC command is relayed.Activating the air recirculation flapThe air recirculation flap is activated using a slide on the control panel. A special mechanism, comprised of a rail, sliding carriage and rotating Bowden cable anchorage, transmits the movement of the slide to the two Bowden cables with multiple guides. The guide is required to prevent the steel wire from bending. The slide engages mechanically at the end stops to secure the positions “Air recirculation flap open” and “Air recirculation flap closed”.Slide on control panelSliding carriage RailGuideRotating Bowden cable anchorageBowden cabless500_052You will find further information on the heating and ventilation system as well as the heating and air conditioning system in self-study programme no. 263 “The Polo 2002”25Heating and Air ConditioningSystem overviewV454V7J293J32J298E30E9 J301J623G17G65G308N24V2 s500_032KeyE9 E30 G17 G65 G308 J32 J285 J293 Fresh air blower switch Air conditioning system switch Ambient temperature sender High pressure sender Evaporator temperature sensor Air conditioning system relay Control unit in dash panel insert Radiator fan control unit V2 V7 V454 J301 J623 N24 Air conditioning system control unit Engine control unit Fresh air blower series resistor with overheating fuse Fresh air blower Radiator fan Air-conditioning compressor26Electrical SystemVehicle electrical systemThe following diagram provides an overview of the network formed by the control units in the up! It uses the network of a fully equipped vehicle with all options as an example.J982J983R T16 J519/J533J245J623 J285/J362 J446 J104 J234 J939 G269 J500 s500_070 G751 G85*KeyG85 G269 G751 J104 J234 J245 J285 J362 J446 J500 J519 J533 J623 J939 J982 J983 Steering angle sender Steering torque sender Rotor position sender for active steering motor ABS/ESP control unit Airbag control unit Sliding sunroof adjustment control unit Control unit in dash panel insert Immobiliser control unit Parking aid control unit Power steering control unit Onboard supply control unit Data bus diagnostic interface Engine control unit Emergency braking function sensor unit Portable navigation and infotainment system Interface for portable navigation and infotainment system Drive train CAN data bus Convenience CAN data bus LIN data bus CAN data bus line LIN data bus line Unidirectional LIN data bus line K-line Mechanical coupling R T16 * Radio Connector, 16-pin (diagnostics connection) The G85 is only integrated in the E595 steering column combination switch in vehicles with EPS.27Electrical SystemInstallation points in the vehicle electrical system•Battery, on the left in the engine compartment A 36 Ah/175 A battery with a charge status display is installed as standard equipment (H3 format).A 44 Ah/ 220 A battery with a charge status display is installed in vehicles which are sold in the so-called cold countries (H4 format).•Alternator, on the right in the engine compartment A 90 Ah alternator is installed in vehicles with a heating and ventilation system. If the vehicle is equipped with a heating and air-conditioning system, a 110 Ah alternator is installed.•Fuse box, at the bottom left on the driver's side of the passenger compartment28•J519 onboard supply control unit with an integrated diagnostics interface for J533 data bus, behind the relay carriers500_025•Relay carrier, on the driver's side of the passenger compartment, behind the left-hand dash panel29Electrical SystemDash panel insertDepending on the equipment, the dash panel insert is available in the following versions. • Lowline • HighlineLowline versionThe single-tube dash panel insert consists of a large round analogue instrument and a multi-line digital display. The speed is displayed on the round analogue instrument. The display shows the tank fill level, the coolant temperature, the outside temperature, the seat belt prompt for the front seats and the belt status display for passengers in the rear. Gear shift recommendations and a gear display are also shown. Switching over between the trip counter and total mileage remains possible. The display colour is red.Turn signal indicator lampSpeed displayDisplays500_116The dash panel insert used in the lowline version calculates all multifunction data even if it cannot be displayed. The data is sent to the J982 portable navigation and infotainment system and displayed by this system if it is installed.30Highline versionThere is a large round analogue instrument at the top centre of the 3-tube dash panel insert and one smaller round analogue instrument on the left and right. A multi-line multifunction display is installed within the centre tube. The speed, tank fill level and the engine speed are displayed by the round analogue instruments. The display shows the coolant temperature, the outside temperature, the seat belt prompt for the front seats and the belt status display for passengers in the rear. Gear shift recommendations and a gear display are also shown. Switching over between the trip counter and total mileage is possible. Information on the functional state of the CV sensor is also available. The display colour is red.Turn signal indicator lampSpeed displayEngine speed displayTank fill level displayDisplays500_112The multifunction display (MFD) actuates the functions in the following order: - Temperature - Driving time - Current consumption - Average consumption - Range indicator - Distance - Average speed - Speed warning For the memory-related sub-functions, such as driving time, distance, average speed and average consumption, memory level 1 or 2 is also displayed.31Convenience ElectronicsOnboard supply control unitFurther enhancements have been made to the J519 onboard supply control unit for the up! and new functions have been added. It also takes on the functions of the central control unit for the J393 convenience system as well as the diagnostic interface functions for the J533 data bus. The diagnostic interface for the J533 data bus is not a separate, self-contained control unit, but has been fully integrated into the onboard supply control unit. The onboard supply control unit is installed underneath the dash panel at the left and is connected using two 73-pin connectors.FunctionsThe scope of functions depends on the equipment. The higher equipment levels are supplemented with the functions listed.Equipment Basic+Functionalities Control of the fuel feed of the electric fuel pump Load management Actuation of driver's door contact Dimming information sent to the CAN data bus Actuation of windscreen wipers; levels I, II and intermittent CV sensor button Actuation of hazard lights, emergency brake hazard lights, brake lights and turn signals Actuation of signalling horn Terminal detection, terminal 15, S-contact Actuation of rear window heating (max. duty cycle of 450 s) Actuation of tailgate authorisation without central locking Actuation of interior light (terminal 30) Drive train CAN data bus Diagnosis CAN data bus Central locking Actuation of door contacts Actuation of convenience rear wiper Actuation of exterior mirror heating Seat heating authorisation Convenience CAN data bus Radio remote control (433/315 MHz) Actuation of tailgate authorisation Starter repeat lock Reversing lights (dimmed) Cruise-control system LIN data bus roof (tilting panorama sunroof)Medium++High+32Parking aidAn optional parking aid, also referred to as a parking distance control (PDC) is available for the up! to help with reverse parking. In the up!, a 3-channel PDC system will be employed for the first time by Volkswagen. This involves installing three ultrasonic sensors around the bumper in the rear of the vehicle. The parking distance warning system therefore only detects objects that are behind the vehicle. The control unit is found in the rear left of the luggage compartment. The warning buzzer is installed in the left C-pillar. The system is activated as soon as the the ignition is switched on and the reverse gear engaged. The distance warning (distance-related intermittent tone) is initiated at an interval of 60 cm (side sensors) or below, and an interval of 150 cm (middle sensor) or below. At a distance of less than 30 cm, a continuous signal tone is emitted. Only the warning about the obstacle near the sensor closest is given.s500_030 Continuous tone Intermittent tone with distancerelated frequencyOptical parking system (OPS)If the vehicle features the optional navigation and infotainment system “maps + more”, the driver is also given visual support. The OPS functions by having the parking aid control unit evaluate the distance information according to sector and transmitting it to the navigation and infotainment system “maps + more”. Not only does this allow the optical parking system to indicate obstacles behind the vehicle, but also indicate its relative position to the vehicle in the scanning area.red = continuous tone yellow = intermittent tone s500_036The display contents shown correspond to the infotainment system with the German system setting and serve merely as an example. Please refer to the corresponding operating manuals for the respective text content displayed in other national languages.33Convenience ElectronicsNetworkingJ982J983R Reversing light switch J519/J533J446 H15G203G796G206 s500_114KeyG203 G796 G206 H15 J446 J519 J533 J982 J983 R Rear left parking aid sender Rear centre parking aid sender Rear right parking aid sender Parking aid warning buzzer Control unit for parking aid Onboard supply control unit Data bus diagnostic interface Portable navigation and infotainment system Interface for portable navigation and infotainment system Radio LIN data bus CAN data bus line Unidirectional LIN data bus line Mechanical coupling Drive train CAN data bus Convenience CAN data bus34InfotainmentRCD 215 radioTechnical features • • • • • Monochrome display (white/negative) with a resolution of 132 x 46 pixels Four output stages, each with 20 W Two or four speakers can be connected Red locator light FM, AM and RDS reception via a single tuner • • • • • Integrated CD drive Media support for MP3 (with ID3 tag) Audio input interface (AUX-IN) in the front panel GALA (speed-dependent volume setting) Network via low speed CANs500_118 AUX-INCombination and enhancement options The RCD 215 radio features an interface for connecting the portable navigation and infotainment system J982 (via J983) using two unidirectional LIN lines. This means that in contrast to a standard LIN protocol, the data is only sent in one direction on each line.Diagnosis The radio features self-diagnostics and can therefore be diagnosed using the VAS diagnostic tester.35InfotainmentAerial systemsThere are 3 different equipment versions for the up!:Without radio preparation If no radio is installed and the vehicle does not feature aerial technology, the hole for the aerial in the roof is plugged with a stopper.With radio preparation Radio preparation includes the power supply lines up to the radio installation position, speaker cables to the 4 speakers (2 at the front and 2 at the rear) as well as the aerial cables. The AM/FM roof aerial and the CAN connection are pre-prepared.With RCD 215 radio When the RCD 215 radio is installed, an active AM/FM rod aerial is installed for radio reception, which also features amplification electronics in the base of the aerial. A second aerial cannot be connected up to the RCD 215.Radio preparation/radio with single-tunerRadio preparationBRCD 215B AM/FM s500_024B = Coding on the aerial plug connection for a radio with supply voltage36The navigation and infotainment system “maps + more”A further highlight in the up! is the navigation and infotainment system “maps + more”. It combines typical car radio functions with the flexibility of a portable navigation system. The J982 portable navigation and infotainment system is a commercial navigation system made by Navigon which has been enhanced with specific functions for Volkswagen. It features a touch-sensitive 5" colour display (touch screen) for display and operation. Voice information is heard via the vehicle loudspeaker.There is a cradle on the dash panel for operation in the vehicle, which allows the J982 portable navigation and infotainment system to be mechanically coupled. This cradle is the interface for the J983 portable navigation and infotainment system and, on the one hand, features a connection for fixing it to the dash panel while, on the other hand, it serves as the cradle for the J982 portable navigation and infotainment system itself. All connecting wires are contained in this cradle – the power supply, audio and aerial connection and also the communication lines to the vehicle network.s500_050s500_023J982 portable navigation and infotainment systemInterface for the J983 portable navigation and infotainment systemThere is a contact surface with 16 pins on the rear of the J983 portable navigation and infotainment system.Contact surface with 16 pinss500_02637InfotainmentMenu guidanceThe following menu guidance only provides a brief introduction to the basic functions of the navigation and infotainment system “maps + more”. A more detailed description can be found in the operating instructions.The display contents which are shown in the following pages correspond to the infotainment system with the German system setting and serve merely as an example. Please refer to the corresponding operating manuals for text content displayed in the relevant national languages.Main menusThe navigation and infotainment system “maps + more” includes four main menus: • Car Info • Media • Navigation • Phones500_02838The “Car Info” menuThis menu includes the following sub-menus: “Trip Computer”, “Think Blue. Trainer” and “Status”.Trip Computer Information on the vehicle such as consumption, range etc. is displayed in this menu item by a multifunction display. This data is calculated by the dash panel insert and made available to the navigation and infotainment system. Furthermore, a vehicle status display for the doors and boot lid is shown when the equipment includes central locking. If a parking aid is installed, OPS is activated when the reverse gear is engaged.s500_038Think Blue. Trainer The system shows a consumption overview for the last few minutes, and recommends the optimum gear to the driver. Furthermore, the driver receives the ThinkBlue! ecotrainer saving tips and direct feedback on their style of driving.s500_044Status The additional analogue instruments, such as “rev counter”, “coolant temperature” or “outside temperature”, can be displayed with their respective measurements.s500_06239InfotainmentThe “Media” menuThis menu includes the following sub-menus: “Radio”, “Media Player” as well as “Pictures”.Radio This menu is used to control the car radio, such as selecting radio channels, setting the reception frequency, switching between FM/AM wave bands or adjusting the volume and radio equalizer.s500_072Media Player This menu is used to control the MP3 player or CD player, such as play/pause, track information display, next/previous track, fast forward/rewind track.s500_074Pictures This menu allows you to display photos saved on a micro SD card in the formats .jpg, .bmp or .png. The “Slideshow” function is deactivated when the vehicle is moving.s500_07640The “Navigation” menuThe navigation functions are the same as the ones featured by the commercial navigation device made by the Navigon company. In the “Navigation” menu, the following sub-menus can be selected: “New Destination”, “My Destinations”, “Take Me Home” as well as “Voice Command”.A destination for which navigation has not yet been used, or which has not been saved, can be entered under “New Destination”. A list of destinations which have already been entered and saved can be accessed under “My Destinations”. An address can be saved as a home address under “Take Me Home”. Navigating there can be started at any time by pressing one single button. The destination can be entered by voice command under “Voice Command”.s500_078The commercial navigation device made by Navigon has been enhanced with the following specific functions for Volkswagen: • • • Low fuel warning Saving vehicle position Anti-theft protectionLow Fuel Warning The Low Fuel Warning is active when the map has been opened in standard mode or navigation mode. It appears as soon as the tank reserve symbol appears in the vehicle's dash panel insert.s500_08041InfotainmentSaving vehicle position The last position of the vehicle is automatically saved under the favourites in the menu “My Destinations”.Anti-theft protection The navigation device can be protected from unauthorised access by setting up a password. The password will be required when the device is not set up in the vehicle and is switched on. As soon as the device is set up in a vehicle, it receives the individual VIN from the vehicle. The device is then able to determine whether it is set up in the “right” vehicle. In this vehicle, the password will only be required once.The “Phone” menuThe navigation and infotainment system features a hands-free module which supports Bluetooth connections to Bluetooth-capable mobile telephones, MP3 players and headsets. It can be connected simultaneously to up to two mobile telephones or MP3 players, one with one headset. The “Phone” menu includes the following sub-menus: “Connected Devices”, “Keyboard”, “Phone Book”, “Recent Calls” and “Voice Command”.„Connected Devices” displays that Bluetooth-capable devices are connected to the navigation and infotainment system. The keyboard for dialling telephone numbers can be opened under „Keyboard”. „Phone book” displays the telephone book for the active telephone, and the call history of the active telephone is opened under „Recent Calls”. To make a call using voice command, the menu „Voice Command” must be selected.s500_08442Universal cellphone preparation (UHV) with audio streamingUniversal cellphone preparation is implemented through the navigation and infotainment system “maps + more”. It supports the following Bluetooth profiles: • Hands Free Profile (HFP) Using the hands-free profile (HFP) a connection to a mobile telephone can be made via Bluetooth. The microphone for the hands-free unit is included with the navigation and infotainment system “maps + more”. The voice output is played by the speakers in the vehicle. When the telephone is being used, any audio source active beforehand is switched to mute. Phonebook Access Profile (PBAP) The Bluetooth-profile phonebook access profile (PBAP) allows the navigation and infotainment system “maps + more” to import the telephone book after being paired with the mobile telephone. A number can then be selected using the navigation and infotainment system. Text to speech (TTS) The navigation and infotainment system “maps + more” is able to display short text messages (SMS) from the paired mobile telephone and read them out loud, if required. Advanced Audio Distribution Profile (A2DP) In addition to making telephone calls, the navigation and infotainment system “maps + more” enables audio streaming from the mobile telephone to the infotainment system via the Bluetooth profile “Advanced Audio Distribution Profile” (A2DP). Audio Video Remote Control Profile (AVRCP) AVRCP is the Bluetooth protocol for remote control of audio data on the paired device.••••Bluetooth-capable mobile phone Navigation and infotainment system “maps + more” HFPP A2DPBAPTTSAVRCPs500_08243500 500© VOLKSWAGEN AG, Wolfsburg All rights reserved. Subject to technical modifications. 000.2812.57.20 Technical status 11/2011 Volkswagen AG After Sales Qualifizierung Service Training VSQ-1 Brieffach 1995 D-38436 Wolfsburg❀ This paper was manufactured using pulp bleached without the use of chlorine..