TECHNICAL DOCUMENTATION

SSP 540 SCR Exhaust Gas Treatment in the Passat 2015

PDFEN40 pages3 MB
SSP 540 SCR Exhaust Gas Treatment in the Passat 2015 - PDF cover

This PDF is currently unavailable.

Read document text
Service TrainingSelf-study Programme 540un leAG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s sility ab y li an pt ceSCR Exhaust Gas Treatment in the Passat 2015 Design and Functionurposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d prrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enr fo nght rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t. C op yi This Self-study Programme will provide you with information about the new features of the SCR system using the Passat 2015 as an example.rrectness of i t to the co nform spec at i h re o n wit in t hises, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nAcross the globe, lawmakers and authorities are progressively lowering the limits for nitrogen oxide levels in motor vehicle exhaust gases. One key technology in reducing nitrogen oxide emissions is the “selective catalytic . Volkswagen AG gen AG does a w reduction” exhaust gas treatment system notstarted using this exhaust gas treatment system olks (SCR system). Volkswagen gu yV b ara already fulfilled the strict nitrogen oxide in cars as early as 2009 withis the ed “Passat BlueTDI”. At the time, this model nte r o eo th standard, which came into force in Europe in limits set by the EU6 emission September 2014. The SCR system has u ra a c s s been enhanced and optimised to adapt the exhaust gas treatment system to the requirements of the new EA288 diesel engine family and to also meet future challenges in reducing emissions.ility ab y li an pt cedo c um enThe Self-study Programme shows the design and function of new developments. The contents will not be updated.For current testing, adjustment and repair instructions, refer to the relevant service literature.2ht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig ht . C op yis540_002Important note ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d n ise r o Exhaust gas treatment system . . . . . . . t.ee.or. . h t u ac a ss.......................... 6ility ab y li an pt cees, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nReducing agent tank system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18rrectness of i t to the co nform spec at i h re o n wit in t hisHeater system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28AdBlue® display system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35do c um enht rig py Co t.Test your knowledge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38AG.Prote cted byagen lksw Vo byc o p yri gh t. C op yi3 IntroductionNitrogen oxides and the EU6 emission standard“Nitrogen oxides” is a collective term for chemical compounds containing nitrogen (N) and oxygen (O2). They include, for example, nitrogen monoxide (NO) and nitrogen dioxide (NO2). These compounds are formed when high pressure, high temperatures and excessive oxygen are present during combustion in the engine. Nitrogen oxides are partly responsible for the so-called acid rain that causes damage to forests. Smog is also attributed to nitrogen oxides among other things. Cutting nitrogen oxide emissions from diesel engines was a key issue in the transition from the EU5 to the EU6 emission standard. The EU6 emission standard came into force in Europe in September 2014. It has set the limit for nitrogen oxides in exhaust gas at 0.08 g/km. The content is therefore over 50% lower compared with the EU5 emission standard.Concepts for reducing nitrogen oxidesWhich system is used depends on the vehicle concept, In order to comply with the strict emission standard the vehicle weight and the associated assessment of limits, we can employ numerous technologies that prevent the formation of nitrogen oxides during the the inertia class in the type approval tests. The inertia lksw agen AG force that the vehicle . Vo AG combustion process. The level of nitrogen oxides that class is used to set the resistive does agen ksw not l o gduring is present in the exhaust gas after combustion can be has to overcome on the dynamometer the type yV ua b d ran e s i t r ee reduced further with an exhaust gas treatment system. tho approval. or ac au s At Volkswagen, this includes the use of an NOx s storage catalytic converter or the selective catalytic reduction system (SCR system).es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nThe following technical measures ensure that as few nitrogen oxides as possible are produced during combustion before an exhaust gas treatment system makes its contribution to reducing nitrogen oxides: • • • • •Configuring the inlet and exhaust ports in the cylinder head for optimum flow High injection pressures to ensure a good mixture formation Optimising the combustion chamber design with the piston recess geometry Low compression ratio Exhaust gas recirculation to reduce the amount of oxygen in the combustion chamber and thus lower the peak combustion temperatureility ab y li an pt cerrectness of i t to the co nform spec at i h re o n wit in t hisdo c um en4ht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig ht . C op yi Exhaust gas treatment with an NOx storage catalytic converterIf the exhaust gas is treated with an NOx storage catalytic converter, the oxidising catalytic converter in the emission control module will have an additional coating. This allows the nitrogen oxides from the exhaust gas to be stored during lean operation. The engine is run with a rich mixture at regular intervals to regenerate the NOx storage catalytic converter. The nitrogen oxides stored in the NOx storage catalytic converter are converted into carbon dioxide and nitrogen.urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pThe function of the NOx storage catalytic converter is described in Self-study Programme no. 526 “The EA288 Diesel Engine Family with EU6 Compliance”.rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enExhaust gas treatment with an SCR systemOne effective way of reducing nitrogen oxide emissions is using an SCR system to treat the exhaust gas. The abbreviation SCR stands for Selective Catalytic Reduction. This system specifically reduces the nitrogen oxides in the exhaust gas. The nitrogen oxides (NOx) contained in the exhaust gas react with ammonia (NH3) to form nitrogen (N2) and water (H2O). This chemical process takes place in a reduction catalytic converter.r fo ngc o p yri gh t . C op yiun len AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a ssThe ammonia required for the reduction process is supplied by a urea solution, the AdBlue®reducing agent. The reaction is assisted by the heat contained in the exhaust gas. The AdBlue®reducing agent is carried in an extra tank in the vehicle and is constantly injected into the flow of exhaust gas in front of the reduction catalytic converter.ht rig py Co t.ility ab y li an pt ceThe design and function of the first SCR system to be used at Volkswagen Passenger Cars are described in Self-study Programme no 424 “Exhaust Gas Aftertreatment System Selective Catalytic Reduction”.agen lksw Vo byAG.Prote cted by5 Exhaust gas treatment systemThe SCR systemOverviewThe following illustration shows the main components of the SCR system in the Passat 2015. The reducing agent tank is located at the rear right underneath the vehicle floor. The filler neck for filling the reducing agent tank is located next to the filler neck for the fuel tank. A delivery unit integrated into the reducing agent tank pumps the reducing agent from the tank to the injector for reducing agent. A coating in the diesel particulate filter, which is located in the emission control module, functions as a reduction catalytic converter. A trap catalytic converter prevents excess ammonia being released into the outside air. The engine control unit uses the NOx sender to monitor the efficiency of the SCR system. G. VolkswagenAG do es n ot g ua ran tee or acNOx senderes, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngA agen ksw l o yV db ise r o Injector for reducing agent uth a s sility ab y li an pt cerrectness of i t to the co nf o r m spec atio h re n in witDiesel particulate filter and reduction catalytic converterTrap catalytic converterthi sd o cu m enDiesel fuel tankAG.6ht rig py Co t.agen lksw Vo byProte cted byc o p yri gh t. C op yi es, in part or in w l purpos hole ercia , is n m ot compe rm itte dun len AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a ssility ab y li an pt cerrectness of i t to the co nform spec a t i h re o n in wit thi sFiller neck for reducing agentReducing agent lineFiller neck for diesel fuelr te o iva r rp fo g ndo c um enReducing agent tank with delivery unitReducing agent line S540_004ht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yiControl unit for reducing agent heater J8917 Exhaust gas treatment systemSchematic diagram of SCR system1216 15n AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o 14 uth or ac a ss3 4 5ility ab y li an pt cees, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ng613rrectness of i t to the co nf o r m spec atio h re n in wit127118thi sd o cu m en91 2 3 4 5 6 7 8Reducing agent tank Reducing agent Filter Heater for reducing agent tank (heater circuit 1) Z102 Reducing agent level sender G697 Temperature sender for reducing agent G685 Control unit for reducing agent heater J891 Diesel particulate filter (reduction catalytic converter)8AG.Keyht rig py Co t.agen lksw Vo byProte cted byc o p yri gh t . C op yi10S540_0359 10 11 12 13 14 15 16Trap catalytic converter NOx sender G295 with control unit for NOx sender J583 Injector for reducing agent N474 Engine control unit J623 Heater for reducing agent line (heater circuit 2) Z104 Reducing agent return flow pump V561 Pulsation damper Pump for reducing agent V437 System overviewSystem overview of sensors and actuators in the SCR system for the Passat 2015SensorsActuatorses, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nAG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo Engine control unit J623 h t u ra Reducing agent level sender G697 a c s sPump for reducing agent V437ility ab y li an pt cerrectness of i t to the co nform spec at i h re o n wit in t hisControl unit for NOx sender J583NOx sender G295Reducing agent return flow pump V561Exhaust gas temperature sender 2 G448Injector for reducing agent N474do c um enExhaust gas temperature sender 4 G648 Control unit in dash panel insert J285Temperature sender for reducing agent G685AG.Exhaust gas temperature sender 3 G495ht rig py Co t.Data bus diagnostic interface J533agen lksw Vo byProte cted byc o p yri gh t. C op yiControl unit for reducing agent heater J891Heater for reducing agent tank Z102Heater for reducing agent line Z104S540_0299 Exhaust gas treatment systemSystem componentsEmission control moduleThe emission control module consists of an oxidising The close-coupled location has the advantage that catalytic converter and a diesel particulate filter. The the reduction catalytic converter quickly reaches its diesel particulate filter has a copper-zeolite coating operating temperature after a cold start. Furthermore AG. Volkswagen AG d n e g a so that it can act as a reduction catalytic converter. the o e s nooperating temperature is maintained longer even ksw t gu Vol y alow-load The reduction catalytic converter during engine operation. d b is therefore ran e s tee ri o h integrated into the diesel particulate filter. or utes, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e nga ssacility ab y li an pt ceNOx sender G295Exhaust gas temperature sender 3 G495 Lambda probe G39Injector for reducing agent N474rrectness of i t to the co nf o r m spec atio h re n in witExhaust gas temperature sender 2 G448thi sd o cu m enOxidising catalytic converterExhaust gas temperature sender 4 G648Diesel particulate filter and reduction catalytic converter10ht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t. C op yiMixerS540_005 Injector for reducing agent N474The injector for reducing agent N474 is a solenoid valve. It is secured with a clamp to the inlet funnel on the emission control module and has the task of injecting reducing agent into the exhaust gas stream behind the oxidising catalytic converter. It is activated by the engine control unit with a pulse-widthmodulated signal for this purpose. A calculation model in the engine control unit is used to determine the required quantity of reducing agent. The model is based on the theoretical nitrogen oxide content in the exhaust gas mass flow. The signals from the temperature sensors and the pressure sensors as well as the masses of the intake air, the recirculated exhaust gases and the injected fuel are evaluated to calculate the nitrogen oxide content in the exhaust gas. The injector has a cooling jacket due to the closecoupled installation position and the resulting high thermal loading. This cooling jacket protects the electrical connection for the injector in addition to the mechanical components against overheating. The injector for reducing agent N474 has been incorporated into the low-temperature coolant circuit in the engine cooling system.es, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo th u ra a c s sility ab y li an pt ceElectrical connectionConnection for reducing agent linerrectness of i t to the co nf o r m spec atio h re n in witCoolant returnthi sd o cu m enCoolant supplyht rig py Co t.Two-hole injectorEffects upon failureIf the injector is defective, insufficient, too much or no reducing agent may be injected into the exhaust system. Compliance to the emissions values is no longer possible. Depending on the defect type, the exhaust emissions warning lamp K83 (MIL) and the AdBlue® warning display for SCR system errors will be switched on in the dash panel insert.agen lksw Vo byAG.Prote cted by c o py rig ht . C op yiS540_04011 Exhaust gas treatment systemMixerpe rm itte des, in part or in w l purpos hole ercia , is n m ot comThe mixer is located in the emission control module between the oxidising catalytic converter and reduction catalytic converter. It ensures a homogeneous distribution of the reducing agent. The reducing agent is injected into the exhaust gas stream via two metering holes in the injector for reducing agent N474. The spray droplets are reduced in size when they hit the baffle plates in the mixer.un leAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo th u ra a c s sThis leads to faster evaporation of the injected reducing agent, which then becomes gaseous. In addition, the exhaust gas mass flow is swirled due to the geometry of the mixer. This ensures even mixing of the injected reducing agent.ility ab y li an pt cer te o iva r rp fo g nInjector for reducing agentdo c um enrrectness of i t to the co nform spec a t i h re o n in wit thi sMixer12ht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig ht . C op yiOxidising catalytic converterReduction catalytic converterS540_008 pe rm itte des, in part or in w l purpos hole ercia , is n m ot comA trap catalytic converter is integrated into the exhaust system. It is located downstream of the emission control module. The trap catalytic converter has two different coatings. One coating is made of copper-zeolite, which functions as a reduction catalytic converter. Any ammonia (NH3) that manages to get past the emission control module will be stored on this coating in the trap catalytic converter. The stored ammonia is used to convert the nitrogen oxides remaining in the exhaust gas into nitrogen (N2) and water (H2O).un leTrap catalytic convertern AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a ssility ab y li an pt ceFurthermore the trap catalytic converter has a coating made of platinum and palladium. The carbon monoxide (CO), which is produced during the regeneration of the diesel particulate filter, oxidises on this coating to form carbon dioxide (CO2). Excess ammonia is also oxidised. This coating therefore acts as an oxidising catalytic converter.rrectness of i t to the co nform spec a t i h re o n in wit thi sr te o iva r rp fo g ndo c um enTrap catalytic converterExhaust flapExhaust flap control unit J883S540_006ht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yi13 Exhaust gas treatment systemCoolant circuit – general overview12345 6 78AG. Volkswagen AG d agen oes ksw l 11 not g o V y 9 ua b d ran ise 10 tee r o h or ut a 12 ac ss15 14 13ility ab y li an pt cees, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g n1617rrectness of i t to the co nform spec at i h re o n wit in t his1819The injector for reducing agent N474 has been incorporated into the low-temperature circuit in the engine cooling system.S540_009Key1 2 3 4 5 6 7 8 9 10 11Coolant expansion tank Heat exchanger for heater Exhaust gas recirculation cooler Gear oil cooler Auxiliary pump for heating V488AG.ht rig py Co t.12 13 14 15 16 17 18 19Injector for reducing agent N474 Throttle valve module J338 Engine oil cooler Thermostat Charge air cooling pump V188 Exhaust gas recirculation control motor V338 Water radiator for charge air cooler Radiatordo c um enCoolant temperature sender G62 Cylinder block Coolant pumpCoolant valve for cylinder head N489 Charge air cooler14Prote cted byCylinder headagen lksw Vo byc o p yri gh t. C op yiLow-temperature circuit High-temperature circuit NOx sender G295The NOx sender G295 is screwed into the emission control module flange. It is located in front of the oxidising catalytic converter in the direction of flow. The engine control unit uses the signal from the NOx sender to determine the nitrogen oxide content in the exhaust gas. Since the signal currents from the NOx sender are in the microampere range, they are processed by the control unit for NOx sender and transmitted to the engine control unit.Control unit for NOx sender J583 NOx sender G295Signal useIn compliance with the European On-Board Diagnosis regulations, the signals from the NOx sender G295 are evaluated by the engine control unit to monitor the efficiency of the SCR system and the quality of the reducing agent.es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nAG. Volkswagen AG d agen oes ksw not l o V gu y b ara S540_039 d nte ise r eo tho u ra a c s sility ab y li an pt cerrectness of i t to the co nform spec at i h re o n wit in t hisMonitoring the efficiency of the SCR systemIn order to monitor the efficiency of the SCR system, the engine control unit compares the values measured by the NOx sender with a nitrogen oxide calculation model. If the system falls below a certain efficiency level, the exhaust emissions warning lamp K83 andthe warning display for SCR system errors will be activated in the dash panel insert. Furthermore an entry is added to the event memory in the engine control unit.Monitoring the quality of the reducing agentht rig py Co t.do c um enThe design and function of the NOx sender are described in Self-study Programme no. 424 “Exhaust Gas Aftertreatment System Selective Catalytic Reduction”.agen lksw Vo byAG.Prote cted byc o p yri gh t. C op yiIn addition to monitoring the efficiency, the NOx sender also checks the quality of the reducing agent.The EU6 emission standard requires that the reducing agent quality is monitored. An appropriate diagnosis system needs to issue a warning if the reducing agent tank is not filled with the correct fluid.15 Exhaust gas treatment systemChecking the efficiency and the quality of the reducing agentThe efficiency and the quality of the reducing agent are checked by the engine control unit simultaneously in one test. This test is performed at regular intervals olkswagen AG when the engine is in overrun phases. en AG. Vwag olks yV b ed ris ho t au ssdoes not gu ara nte eo ra cSpecific operating conditions are required for the test in which different temperatures and air mass flows are examined by the engine management system. The overrun phase of the engine needs to last at least 4 seconds for the test to be completed successfully.ility ab y li an pt cees, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngFunctionWhen the test conditions are met, the engine control unit will close the exhaust flap from the time when the engine switches from load operation to overrun. The exhaust gas and its nitrogen oxide content can now no longer escape from the exhaust system. It is fed via the low-pressure exhaust gas recirculation system, the intake manifold and the combustion chambers to the NOx sender.The exhaust gas is therefore recirculated and no air can be drawn in. At the same time, reducing agent is still injected via the injector.rrectness of i t to the co nf o r m spec atio h re n in witthi sd o cu m enNOx sender G295Throttle valve module J338 S540_01016ht rig py Co t.Injector for reducing agent N474agen lksw Vo byProte cted by c o py rig ht . C op yiMixerExhaust flap control unit J883 Reduction catalytic converterAG.Control unit for NOx sender J583Exhaust gas recirculation control motor 2 V339 Assessing the efficiencyDuring the system test, the engine control unit monitors the NOx content measured by the NOx sender and compares it with a calculated target value. If the difference is too great, the efficiency of the SCR system will be assessed as too low.es, in part or in w l purpos hole ercia , is n m ot compe rm itte dun leAG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s sility ab y li an pt cerrectness of i t to the co nform spec a t i h re o n in wit thi sAssessing the quality of the reducing agentIn addition to monitoring the efficiency, the engine control unit determines the rate at which the NOx concentration in the exhaust gas decreases. If the NOx concentration falls rapidly, the quality of the reducing agent is fine. If the NOx concentration stagnates or falls only slowly, the reducing agent quality is assessed as poor.Poor quality can arise, for example, if the reducing agent tank has been filled with water instead of reducing agent. If the engine control unit detects that the efficiency level is too low or the AdBlue® has a poor quality, an entry will be made in the event memory. The warning display for SCR system errors will appear and the exhaust emissions warning lamp will light up in the dash panel insert.ht rig py Co t.r te o iva r rp fo g ndo c um enEffects of signal failure If the signal fails, an entry will be made in the engine control unit event memory. The exhaust emissions warning lamp K83 (MIL) and the AdBlue® warning display for SCR system errors will be switched on in the dash panel insert.agen lksw Vo byAG.Prote cted byc o p yri gh t. C op yi17 Reducing agent tank systemAdBlue® reducing agentThe ammonia required to reduce the nitrogen oxides is not used in its pure form, but in the form of a urea solution. In its pure form, ammonia irritates the skin and mucous membranes, and also has a unpleasant odour. Diesel exhaust fluid or DEF, which is commonlyurposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pun leAG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s sreferred to under its brand name AdBlue® throughout the automotive industry, is used as the reducing agent for the SCR system. It is a high-purity, transparent aqueous solution containing 32.5% urea. It is manufactured synthetically.ility ab y li an pt cerrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enFreezing point of AdBlue®35 Temperature in °C155-5 -11 -15 0 10 20 30 40 50 60 70 Urea concentration in %Properties of AdBlue®• • AdBlue® freezes at temperatures below -11 °C. AdBlue® ages at high temperatures. This results in the formation of ammonia and an unpleasant odour can therefore be produced. Contamination from foreign substances and bacteria can render AdBlue® useless. Urea that leaks and crystallises causes white marks. These marks can be removed with water and a brush (as soon as possible). AdBlue® is highly penetrative. Ensure that AdBlue® does not get into electrical components or connectors.Notes on handling AdBlue®• Only use AdBlue® that complies with the approved manufacturer’s standard and from original containers. Drained AdBlue® must not be reused to prevent contamination. The reducing agent tank may only be filled using containers and adapters approved by the manufacturer. The reducing agent can irritate the skin, eyes and respiratory organs. If this fluid comes into contact with skin, it should be immediately washed off with plenty of water.• •• •••18ht rig py Co t.agen lksw Vo byAG.AdBlue® has a urea content of 32.5%. The reducing agent has the lowest freezing point of -11°C in this mixing ratio. A different mixing ratio with too much urea or too much water will cause the freezing point of AdBlue® to rise.r fo ngProte cted by25c o p yri gh t. C op yiS540_032 Refilling reducing agent with an AdBlue® pumpThe reducing agent tank in the Passat 2015 can be filled using the pump nozzles provided by the . Volkswagen AG n AG for heavy European AdBlue® filling station network does wage s k not l Vo fill the tank at a gu goods vehicles. Since thesedpumps by ara e nte ris o eo very high rate, the tank h needs to be quickly vented t u ra a c ss during the filling process. In contrast, when you fill the tank with a refill bottle, the air can escape more slowly. The different filling speeds can result in different filling quantities in the reducing agent tank.es, in part or in w l purpos hole ercia , is n m ot comility ab y li an pt cepe rm itte dun lerrectness of i t to the co nform spec a t i h re o n in wit thi sS540_031r te o iva r rp fo g ndo c um enAdBlue® pump for cars *) AdBlue® refill bottle*) A wide network of AdBlue® pumps for cars is not expected in Europe before 2018.Only fill the reducing agent tank with the intended containers and filling systems. This guarantees the correct filling speed and prevents the tank being overfilled. Furthermore this ensures that a sufficiently large expansion volume is retained for the reducing agent in the tank.AG.AdBlue® pump for heavy goods vehiclesagen lksw Vo byFilling systemFilling speedMax. 40 l/min 3.5–10 l/min Approx. 3 l/minht rig py Co t.Prote cted byc o p yri gh t . C op yi19 Reducing agent tank systemDesign of tank systemIn the Passat 2015, the reducing agent tank is located at the rear right underneath the vehicle floor. The tank is made from plastic and has a volume of approximately 13 litres.Filler neck Breather line Expansion section Cap Magnetic ring Filler pipe Reducing agent tankurposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pun leAG. Volkswagen AG d agen oes ksw not l o gu yV Spiked mats b Emergency ventilation system ara d e nte is r o e th or ac au ssility ab y li an pt cerrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enNon-return flapDelivery unitBaffle plateS540_026r fo ngDelivery unitThe sensors and actuators for the reducing agent tank system are located in the delivery unit for reducing agent metering system GX19. The delivery unit is sealed to the reducing agent tank.AG.20ht rig py Co t.agen lksw Vo byProte cted by c o py rig ht . C op yi CapThere is a diaphragm in the cap for the filler neck. It forms part of the breather system for the reducing agent tank together with the emergency ventilation system.Non-return flapThere is a spring-loaded non-return flap at the bottom end of the filler pipe. It prevents reducing agent escaping from the filler neck at the end of a high-speed filling process.Expansion sectionIf reducing agent rises inside the breather line during a high-speed filling process, it can be held and settle in this expansion section.Spiked mat and baffle plateThe spiked mat and the baffle plate reduce “sloshing noises” that are caused by reducing agent flowing back and n AG. Volkswagen AG do es n wage s forth while you drive. k l ot Voby ed ris o th ventilation au system ssEmergencygu ara nte eo ra ces, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nIf ventilation is not possible via the filler cap because the reducing agent has frozen, the pressure in the tank will be compensated exclusively via the emergency ventilation system.ility ab y li an pt ceMagnetic ring for unlocking AdBlue® pump nozzles for heavy goods vehiclesThe filling tube on AdBlue® pump nozzles for heavy goods vehicles contains a magnetic switch. This magnetic switch functions as a safety valve to prevent the fluid being delivered into the wrong tank. It can only be opened with a defined magnetic field that is applied externally. The filler neck features a magnetic ring that allows you to fill the reducing agent tank with an AdBlue® pump for heavy goods vehicles. The magnetic switch is opened by the magnetic ring when you insert the pump nozzle.Prote cted byrrectness of i t to the co nform spec at i h re o n wit in t hisMagnetic switchdo c um enAdBlue®ht rig py Co t.agen lksw Vo byAG.c o p yri gh t . C op yiMagnetic ringS540_04821 Reducing agent tank systemDelivery moduleurposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pun len AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a ssility ab y li an pt ceThe delivery module is bolted to the bottom of the delivery unit. Two pumps are integrated into the delivery module: • • Pump for reducing agent V437 Reducing agent return flow pump V561Delivery unitrrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enBoth pumps are solenoid-actuated diaphragm pumps. They are activated by the engine control unit.Pump for reducing agent V437r fo ngTo and from the injector for reducing agent N474 S540_012DesignSolenoidReducing agent return flow pump V561Magnetic pistonDiaphragmElectrical connection S540_01522ht rig py Co t.Please observe the information and notes in the workshop manual when installing and removing the delivery module.agen lksw Vo byc o p yri gh t . C op yiReducing agent return flow pump V561AG.Prote cted byPump for reducing agent V437 Magnetic piston Piston spring Plunger Diaphragm Pulsation damperConnection for reducing agent line Pump for reducing agent V437The pump for reducing agent is a solenoid-actuated diaphragm pump. The solenoid functions as a pump drive for the magnetic piston that moves the diaphragm below it up and down via a plunger. Nonreturn valves at the inlet and outlet control the supply of reducing agent to the pump chamber. The pump delivers the reducing agent by activating the solenoid to move the piston. The pump draws in the reducing agent during the return movement of the piston caused by the spring.es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo th u ra a c s sDelivery pumpility ab y li an pt ceTerminal 87 (+) Earth from J623rrectness of i t to the co nform spec at i h re o n wit in t hisdo c um enReducing agent return flow pump V561The return flow pump extracts the reducing agent partially from the supply line after the engine has been switched off. This prevents the reducing agent from freezing in the injection valve at low temperatures and causing damage due to ice expansion. Immediately after you switch off the engine, the return flow pump is activated by the engine control unit for approximately 5 seconds to extract a sufficient quantity of reducing agent from the supply line. The injector remains closed initially so that hot exhaust gases are not drawn into the supply line. The injector is then opened to compensate the vacuum in the supply line during the extraction process.Return flow pump S540_014agen lksw Vo byAG.The voltage for both reducing agent pumps is supplied via the relay for reducing agent metering system J963.ht rig py Co t.Prote cted by c o py rig ht . C op yiS540_013Earth from J623 Terminal 87 (+)23 Reducing agent tank systemMonitoring the system pressureFunctionThe pump for reducing agent V437 delivers the reducing agent from the reducing agent tank with an almost constant stroke volume and delivers it to the injector for reducing agent N474. The quantity of reducing agent that is injected depends on the nitrogen oxide content in the exhaust gas. The engine control unit uses the injector opening time and opening frequency to set the quantity. A pressure equilibrium of approximately 6.5 bar (+/- 2 bar) is set in the reducing agent system due to the continuous injection and the constant stroke volume. The engine control unit evaluates the current flowing through the pump for reducing agent in order to monitor the hydraulic pressure of the reducing agent in the SCR system. For this purpose, the times from the start of energisation to the first movement and to the end position of the magnetic piston are measured. In addition, the strength of the current flow is evaluated. The engine control unit uses this data to calculate the pressure of the reducing agent in the SCR system. Examples of possible system faults: • • • • The reducing agent line is damaged and is leaking. The pump is jammed. The metering holes on the reducing agent injector are blocked. The intake area for the delivery unit is blocked.es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h 1 ut ra a c s sility ab y li an pt ce2rrectness of i t to the co nform spec at i h re o n wit in t his873It64 5ht rig py Co t.do c um enKey1 2 3 4 Reducing agent tank Reducing agent Filter Injector for reducing agent N4746 7 8Engine control unit J623 Pulsation damper Pump for reducing agent V43724AG.5Diesel particulate filter (reduction catalytic converter)agen lksw Vo byProte cted by c o py rig h t . Co py iS540_045 Delivery unit for reducing agent metering system GX19The delivery unit contains the sensors and actuators for the reducing agent tank system. It is sealed into the reducing agent tank. The reducing agent level sender G697, the temperature sender for reducing agent G685 and the heater for reducing agent tank Z102 have been permanently integrated into the delivery unit. The delivery module with the reducing agent pumps is bolted to the delivery unit and can be exchanged if necessary. A filter in front of the intake prevents the SCR system being damaged by particles of dirt in the reducing agent. The reducing agent drawn in from the reducing agent line by the return flow pump is fed back into the reducing agent tank.DesignHousing for delivery moduleswagen AG . Volk Heater for reducingaagent tank Z102 gen AG does, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngReturn line for reducing agentw olks yV b ed ris ho t au sses n ot g ua ran tee or acility ab y li an pt cerrectness of i t to the co nf o r m spec atio h re n in witElectrical connection for delivery moduleConnection for reducing agent lineFilterthi sd o cu m enPWM signal G697/G685 Earth G697/G685 Positive G697/G685 Positive Z102 Earth Z102Reducing agent level sender G697agen lksw Vo byElectrical connectionTemperature sender for reducing agent G685S540_027ht rig py Co t.AG.Prote cted by c o py rig ht . C op yi25 Reducing agent tank systemReducing agent level sender G697Design and functionReflected signal pulses Transmitted signal pulsesAdBlue® Reducing agent tank Duct for ultrasonic wavesAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo th u ra a c s sility ab y li an pt ceun leurposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pReducing agent level sender G697S540_016The reducing agent level sender G697 is an ultrasonic sensor. The sound waves emitted by the sensor are guided through a duct. This prevents scatter and reflections that could distort the signal. The ultrasonic waves are reflected by the boundary layer between the reducing agent and the air. In this case, the reducing agent level is determined from the time difference between the emitted signal pulse and the received signal pulse.The signal from the temperature sender for reducing agent G685 is used to calculate the filling level of the reducing agent. This allows the density of the reducing agent to be taken into consideration at different temperatures. The measuring system will not work if the reducing agent is frozen.rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enAt least 3.5 to 4 litres of reducing agent need to be filled into the reducing agent tank before the engine control unit can reliably detect the new level. Please observe the information in the owner’s manual.ht rig py Co t.Effects of signal failure If the signal from the reducing agent level sender fails, the filling level of the reducing agent tank cannot be measured. The SCR system remains active, however. The AdBlue® warning display for SCR system errors lights up in the display and the exhaust emissions warning lamp K83 is switched on.26agen lksw Vo byAG.Prote cted by c o py rig ht . C op yir fo ng Temperature sender for reducing agent G685The temperature sender for reducing agent is a thermistor sensor with a negative temperature coefficient (NTC). It is located in the delivery unit housing. The engine control unit evaluates the PWM signal from the temperature sender and uses it to calculate the current temperature of the reducing agent in the reducing agent tank. The voltage for the temperature sender is supplied via the relay for reducing agent metering system J963.S540_041AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o Temperature sender for reducing e o agent G685 h ut ra a c s sility ab y li an pt cees, in part or in w l purpos hole ercia , is n m ot compe rm itte dun lerrectness of i t to the co nform spec a t i h re o n in wit thi sSignal use The engine control unit uses the signal from the temperature sender for reducing agent to switch on the heater systems in the SCR system. Furthermore the signal is used to calculate the filling level in the reducing agent tank.Effects of signal failure The exhaust emissions warning lamp and the AdBlue® warning display for faults in the SCR system are switched on in the dash panel insert.r te o iva r rp fo g ndo c um enht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig h t . Co py i27 Heater systemReducing agent heater systemSince the reducing agent can freeze at low ambient temperatures, the reducing agent tank and the line to the reducing agent injector are both equipped with resistance heating systems. Furthermore the two solenoids in the delivery module can be energised if heating is required. The heater system allows the SCR system to be quickly prepared for operation even when the reducing agent is frozen. It also ensures that sufficient defrosted reducing agent is available at all operating points.Relay for reducing agent metering system J963 Engine control unit J623Terminal 87 (+)urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pun leOverview of heater systemAG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s sility ab y li an pt ceControl unit for reducing agent heater J891rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enFunctionUsing the information from the ambient temperature sensor G17 and the temperature sender for reducing agent G685, the engine control unit J623 determines the heating requirements for the reducing agent. The engine control unit then activates the control unit for reducing agent heater J891, which activates the electrical power supply for the heaters. European On-Board Diagnosis regulations require that the heating current is monitored to allow failure of or a malfunction in emissions-related components to be detected. The engine control unit receives feedback on the actual heating current flow from the control unit for reducing agent heater.28ht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t. C op yiHeater for reducing agent pump Z103Temperature sender for reducing agent G685Ambient temperature sensor G17r fo ngHeater for reducing agent tank Z102Heater for reducing agent line Z104S540_030 Control unit for reducing agent heater J891The control unit for reducing agent heater J891 controls the electrical power supply to the SCR system heaters. It is n AG. Volkswagen AG do activated by the engine control unit for this purpose. In es n wage s k l ot g Vo y ua b the Passat 2015, it is located near the rear right of the ran ed s i tee r o h luggage compartment. t or ues, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e nga ssacility ab y li an pt ceS540_034Heater for reducing agent tank Z102rrectness of i t to the co nf o r m spec atio h re n in witThe heater for reducing agent tank Z102 is a positive temperature coefficient heater element (PTC). It is integrated into the delivery unit and heats the reducing agent around the pick-up point in the reducing agent tank. The engine control unit activates it as required via the output stage of the control unit for reducing agent heater.S540_050Heater for reducing agent line Z104thi sd o cu m enCorrugated plastic conduit Heater element S540_042Heater for reducing agent pump Z103The two solenoids in the delivery module function as the heater for reducing agent pump Z103. To achieve the heating function, the solenoids are energised by the engine control unit according to the heating requirements and thus generate heat. The solenoids are energised constantly or intermittently depending on the temperature. The temperature of the reducing agent pumps is calculated by evaluating the current flow and a temperature model in the engine control unit.Solenoidsht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yiThe heater for reducing agent line Z104 consists of a stainless steel wire that is wound in a spiral around the reducing agent line. It functions as a resistance-heating element and is protected on the outside by a corrugated plastic conduit. The heater element is activated by the engine control unit via the control unit for reducing agent heater as required. As a result, the reducing agent in the supply line is warmed thus enabling reliable operation of the SCR system at low ambient temperatures.S540_03629 Heater systemHeater circuits and heating durationThe heater control system is sub-divided into three Standby heating starts once the heating time for heater circuits. The power for the heater circuits 1 and defrosting the reducing agent has expired. This 2 is supplied by the control unit for reducing agent that a sufficient amount of defrosted reducing . Volkswag en AG AGensures does agen ksw not supplied in all operating ranges. l o heater J891. Heater circuit 3 is operated by the agent can always be V gu y ara db e nte engine control unit. The heater circuits areorswitched is eo th ra au reducing on depending on the temperatures in s the c s agent tank, the temperature of the outside air and the temperature of the reducing agent pump. They remain active for a specific time.ility ab y li an pt cees, in part or in w l purpos hole ercia , is n m ot compe rm itte dun lerrectness of i t to the co nform spec a t i h re o n in wit thi sHeater circuit 1 Heater for reducing agent tank Z102 • • Temperature in the tankr te o iva r rp fo g nHeater circuit 2 Heater for reducing agent line Z104 • • Temperature in the tank Temperature of outside airHeater circuit 3Heater elementHeater for reducing agent pump Z103 • • • Temperature in the tank Temperature of outside air Temperature of pumpdo c um enTrigger for activationTemperature of outside airActivation of standby heating•Temperature of outside air: below -7°C and temperature in the tank below +5°C•Temperature in tank or of outside air below -5°C30agen lksw Vo byAG.Activation and heating duration for defrosting•Approximately 20 min. at temperatures from -7°C to -15°C in the tank and up to 45 min. at -25°C•Approximately 5 min. at temperatures below -7°C in the tank or outside air and up to 21 min. at 25°Cht rig py Co t.Prote cted by c o py rig h t . Co py i•Approximately 20 min. at temperatures from -7°C to -15°C in the tank and up to 45 min. at -25°C•Temperature in tank or of outside air below 0°C and pump temperature below +40°C AdBlue® display systemAdBlue® displays in dash panel insertThe AdBlue® displays appear in the dash panel insert to inform the driver in sufficient time if the reducing agent needs to be topped up or to indicate an error in the SCR system. Warning display for filling level Warning display when there is an error in the SCR systemes, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo th u ra a c s sility ab y li an pt ceTop up AdBlue! No engine start possible in 1000 km.Error: AdBlue. No engine start possible in 1000 km.rrectness of i t to the co nf o r m spec atio h re n in witS540_018S540_020•When the filling level becomes too low, the reducing agent tank needs to be filled with AdBlue®.•If there is an error in the SCR system, the car will need to be taken to a qualified workshop.Failing to observe the warnings will result in an engine restart lockout after the remaining range has been used up. You can then no longer start the engine once you switch off the ignition.Display strategy sequenceht rig py Co t.Prote cted by c o py rig ht . C op yiDepending on the remaining range, the warning displays about the filling level or system errors are shown in several stages. After a specific distance has been covered, the intensity of the visual and acoustic warnings will increase. In addition, the warning message will be displayed repeatedly in the dash panel insert depending on the time and distance covered.Remaining range Colour of warning display White Repeat of warning displayagen lksw Vo byAG.thi sd o cu m enAcoustic warningFrom 2,400 kmThe warning is repeated every 400 km or every 8 hours and displayed in the dash panel insert. The figure for the remaining range is displayed in steps of 100 km. The warning is repeated every 100 km or every 4 hours and displayed in the dash panel insert. The figure for the remaining range is displayed in steps of 50 km. The warning is repeated every 20 km and displayed in the dash panel insert. The figure for the remaining range is displayed in steps of 10 km. Warning: engine start not possible.1 x acoustic warningFrom 1,000 kmYellow1 x buzzerFrom 200 kmYellow1 x buzzer0 kmRed3 x buzzer31 AdBlue® display systemAdBlue® warning displays about the filling level in the reducing agent tankFilling level warning stage 1The first request to refill reducing agent is displayed when the remaining range that can be driven with the available AdBlue® reaches 2,400 km. The engine control unit calculates the remaining range on the basis of the quantity of reducing agent in the tank and the reducing agent consumption.Top up AdBlue! Range: 2400 km.S540_017Filling level warning stage 2The warning is intensified once the remaining range reaches 1,000 km. It is also displayed in yellow and a warning triangle is added. You can only drive for the displayed remaining range. If you do not refill a AG. Volkswagen AG d agen oes sufficient quantity of reducing agent, you will no ksw not l o gu yV b ara Top up AdBlue! longer be able to restart the engineisafter the ed nte r o e o start possible No engine h t remaining range has been used ra auup and the ignition in 1000 c km. ss is switched off.ility ab y li an pt cepe rm itte dun leS540_018es, in part or in w l purpos hole ercia , is n m ot comrrectness of i t to the co nform spec a t i h re o n in wit thi sFilling level warning stage 3If there is no more AdBlue® in the reducing agent tank, the warning symbol will be displayed in red. Reducing agent needs to be refilled in order to end the engine start lockout.r te o iva r rp fo g nTop up AdBlue! Engine cannot be started again.do c um enht rig py Co t.32agen lksw Vo byAG.Prote cted by c o py rig ht . C op yiS540_019 maximum refill quantity. You need to refill at least as much reducing agent as indicated by the minimum refill quantity to clear the warning from the dash panel insert. A smaller refill quantity cannot be reliably detected by the engine control unit.es, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngAG do agen es n lksw ® ot g o V In the Passat 2016, the b AdBlue warning display y ua ran ed s i tee r in the reducing agent tank will about the filling level o h t or u ac a be supplemented ss with indications of the minimum andExtended display of the remaining range AG. Volkswagenility ab y li an pt ceTop up AdBlue! No engine start in 1000 km.Top-up quantity (l): Min: 4.0 - Max: 11.5rrectness of i t to the co nf o r m spec atio h re n in witS540_047thi sd o cu m enDisplay of remaining range on the multifunction displayIn the Passat 2016, the driver will also be able to check the current remaining range via the multifunction display menu before the warning range is reached. Minimum top-up quantity The figure for the minimum top-up quantity indicates the minimum quantity of AdBlue® that needs to be delivered into the tank to cause the display to change after filling. Maximum top-up quantity The figure for the maximum top-up quantity helps you choose a suitable refill container if you are using one.AdBlue rangeht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yikm Top-up quantity (l): Min.: 3.5 – Max.: 7.75 S540_04333 AdBlue® display systemAdBlue® warning displays for SCR system errorses, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nIf the engine control unit detects an error display will appear in the dash panel insert that indicates a malfunction in the SCR system.n AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t o insthe sender, au SCR system or insufficient efficiency via the NOxr a c sa warningility ab y li an pt cerrectness of i t to the co nform spec at i h re o n wit in t hisSystem fault warning stage 1If a fault is detected in the SCR system and you have covered a distance of 50 km, the warning display will be shown in yellow. A spanner symbol will also be displayed as a visual indicator of a system fault. The remaining range is 1,000 km. The distance already covered is immediately deducted from this figure. This is not based on the reducing agent tank level nor the reducing agent consumption.c o p yri gh t . C op yiError: AdBlue. No engine start possible in 1000 km.do c um enS540_020System fault warning stage 2If the error in the SCR system is not rectified within the remaining range, the engine can no longer be started after the ignition is switched off.Error: AdBlue. Engine cannot be started again.If there is a fault in the SCR system, this fault and the warning display can only be rectified by using the Guided Fault Finding. In this case, refilling AdBlue® will not lead to the display in the dash panel insert being cleared.The restart lockout can be overridden for a further distance of 50 km by using the vehicle diagnostic tester. This allows the vehicle to be driven to the next workshop.34ht rig py Co t.agen lksw Vo byAG.Prote cted byS540_021 ServiceAdBlue® filling options for customersAdBlue® pumpsThe reducing agent tank in the Passat 2015 can be filled at a pump (see page 19).AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo th u ra a c s sility ab y li an pt cees, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngrrectness of i t to the co nf o r m spec atio h re n in witS540_031Refill bottleThe refill bottle contains 1.89 litres (equivalent to half a US gallon).thi sd o cu m enS540_022Refill containerThe refill container contains 5 litres. The AdBlue tank should be refilled using the corresponding filler hose.S540_044ht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig ht . C op yi35 ServiceSpecial tools and workshop equipmenturposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pun leAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s sility ab y li an pt cerrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enDescriptionToolUsageAdBlue® filling system VAS 6960The mobile filling system VAS 6960 can be used cordlessly in workshops. AdBlue® is filled from a 60-litre drum via a sensor-controlled filling nozzle into the reducing agent tank in the vehicle. The filling system shuts off automatically when the maximum filling level has been reached.r fo ngMounting plate V.A.G 1383A/136AG.Filling device for AdBlue® VAS 6542S540_023S540_049ht rig py Co t.S540_028agen lksw Vo byProte cted by c o py rig h t . Co py iVAS 6542 can be used to fill reducing agent tanks in a workshop. The container VAS 6542/1 holds 10 litres. The maximum filling level is reached when the breather hose fills with liquid or the container noticeably collapses. Observe the correct height difference between the container and filler neck.The mounting plate is used to mount the container VAS 6542/1 securely during the filling process with the filling device for AdBlue® VAS 6542. Test case VAS 6532es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nDescriptionTooln AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a ssUsageThe tools in the test case are used to test the metering quantity and system pressure as part of the Guided Fault Finding.rrectness of i t to the co nform spec at i h re o n wit in t hisility ab y li an pt ceS540_024do c um enS540_025 Refractometer T 10007 A The refractometer is used to check the concentration of urea in the AdBlue®.S540_038ht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yiVacuum box VAS 6557The vacuum box is used to extract AdBlue® from the reducing agent tank.37 Test your knowledgeWhich answers are correct?One or several of the given answers may be correct. 1. How is the AdBlue® drained from the reducing agent supply line in the SCR system for the Passat 2015 upon “ignition OFF”? a) The AdBlue® is pumped out of the reducing agent supply line by the reducing agent pump after the reversing valve for reducing agent is actuated. b) The AdBlue® is pumped out of the reducing agent supply line by the reducing agent return flow pump. c) After “ignition off”, the AdBlue® in the reducing agent supply line is drained via the reducing agent injector and temporarily stored in the diesel particulate filter coating.❒ ❒ ❒2.How is the filling level of the reducing agent tank determined by the engine control unit in the SCR system for the Passat 2015? a) By using a float with a magnet and six reed contact switches. b) By using four fill level senders made of stainless steel and evaluation electronics. c) By using an ultrasonic sensor.AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte s i r Which statement about monitoring the efficiency of o e o the th u ra a c s s❒ ❒ ❒3.SCR system in the Passat 2015 is correct?pe rm itte d❒ ❒ ❒ility ab y li an pt cees, in part or in w l purpos hole ercia , is n m ot comun lea) The efficiency of the SCR system is monitored by using an NOx sender before the emission control module. b) The efficiency of the SCR system is monitored by using an NOx sender after the emission control module. c) The efficiency of the SCR system is monitored by using one lambda probe before the emission control module and one after it.rrectness of i t to the co nform spec a t i h re o n in wit thi sr te o iva r rp fo g ndo c um en38ht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig ht . C op yi 4.What functions does the trap catalytic converter have? a) It oxidises carbon monoxide into carbon dioxide. b) It oxidises soot particles into carbon dioxide. c) It stores excess ammonia, which is used to convert nitrogen oxides remaining in the exhaust gas into nitrogen and water. d) It stores nitrogen oxides that are converted into nitrogen and water in a regeneration process.❒ ❒ ❒ ❒5.The following warning symbol appears in the dash panel insert display. olkswagen AG en AG. V does Which statement is correct? olkswag nossyV db ise r tho aut gu ara nte eo ra cility ab y li an pt cees, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngrrectness of i t to the co nf o r m spec atio h re n in witS540_046❒a) The reducing agent tank is empty. The engine can only be started again once the reducing agent tank has been filled. b) The reducing agent tank is empty. The engine can only be started again once the entry in the engine control unit event memory has been deleted.thi sd o cu m en❒ ❒ ❒c) There is an error in the SCR system. The engine cannot be started.ht rig py Co t.Prote cted by c o py rig h t . Co py id) There is an error in the SCR system. The engine can be started so that the customer can reach the next workshop.agen lksw Vo byAG.Answers: 1.) b) 2.) c) 3.) a) 4.) a), c) 5.) c)39 540Top up AdBlue! Range: 2400 km. Error: AdBlue. Engine cannot be started again.n AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a ssility ab y li an pt cees, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nAdBlue rangerrectness of i t to the co nform spec at i h re o n wit in t hisTop up AdBlue! No engine start possible in 1000 km.km Top-up quantity (l): Min: 3.5 – Max.: 7.75do c um en© VOLKSWAGEN AG, Wolfsburg All rights reserved. Subject to technical modifications. 000.2812.97.20 Technical status 07/2015 Volkswagen AG After Sales Qualification Service Training VSQ-2 Brieffach 1995 D-38436 Wolfsburg❀ This paper was manufactured from pulp that was bleached without the use of chlorine.ht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yi