TECHNICAL DOCUMENTATION
SSP 545 The Passat 2015 Electrical System

This PDF is currently unavailable.
Read document text
Service TrainingSelf-study Programme 545The Passat 2015 Electrical System Design and functionAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo th u ra a c s sility ab y li an pt cees, in part or in w l purpos hole ercia , is n m ot compe rm itte dun lerrectness of i t to the co nform spec a t i h re o n in wit thi sr te o iva r rp fo g ndo c um enht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig ht . C op yiThe eighth generation of the Passat is also now changing from the platform strategy to the modular transverse matrix MQB. MQB-B is the term referred to for the Passat (B-class) and allows for the differentiation of vehicle classes. As a further development from the Golf class (MQB-A), the Passat plays host to state-of-the-art technical automotive innovations, such as: • the Active Info Display (AID) dash panel insert • LED headlight technology in conjunction with Dynamic Light Assist (DLA) This self-study programme gives a deeper insight into the electrical system of the Passat 2015.n AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a ssility ab y li an pt cees, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngrrectness of i t to the co nf o r m spec atio h re n in witthi sd o cu m enThe self-study programme shows the design and function of new developments. The contents will not be updated.For current testing, adjustment and repair instructions, refer to the relevant service literature.2ht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yis545_001Important noteContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 The electronics in the vehicle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Lightweight features of the electrical system . . . . . . . . . . . . . . . . . . . . . . . . . . . 5n AG. Volkswagen AG do wage s k l o Overview of the electrical system . . . . . . . . ...................e . s.no . t.gu .... 6 yV b a d e s . . . . . . . . . . . . . . . . . . . . . . . . . . . .ra The „front battery” supply concept . o .ri. .n. .6 tee th u ac The „rear battery” supply conceptss a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . or8es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nility ab y li an pt ceNetworking concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview of the data bus systems used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The CAN buses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Component protection and the immobiliser . . . . . . . . . . . . . . . . . . . . . . . . . . . Terminal control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The auxiliary light module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The tail lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The interior lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dash panel insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Medium dash panel insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Colour dash panel insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Active Info Display (AID) dash panel insert . . . . . . . . . . . . . . . . . . . . . . . .agen lksw Vo byAG.Prote cted by c o py rig ht . C op yi10 10 11 18 19rrectness of i t to the co nform spec at i h re o n wit in t his20 20 31 32 34 36 36 36 37 40 40 46 48 49 53 55 58do c um enConvenience electrical system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Keyless Entry and Start System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Easy Open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The control unit for electronic steering column lock J764 . . . . . . . . . . . . . . . . The exiting concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The start-stop system 2.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The reversing camera R189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The heated steering wheel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60ht rig py Co t.3IntroductionThe electronics in the vehiclees, in part or in w l purpos hole ercia , is n m ot comand electronics (such as the electromechanical parking brake). For example, the latest generation of Passat, equipped to the highest level, currently features 68 control units. To network this multitude of control units, the following data buses are used: CAN, LIN and MOST.pe rm itte dun leAG. Volkswagen AG d agen oes ksw not l o V places only where it was absolutely gu y in While, even up to a few years ago, electronics were employed b ara essential in d e nte is r o echanged. physical terms, e.g. in ignition systems and engine management systems, the situation has progressively h or ut ac a s Many purely mechanical systems have become technical innovations owing to their enhancement with electrics sility ab y li an pt cerrectness of i t to the co nform spec a t i h re o n in wit thi sr te o iva r rp fo g ndo c um ens545_032The control units and other networked components are not connected to the same data buses in every model. In fact, the data buses are designed for each specific model to cater for bus capacity utilisation and the exchange of messages.4ht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig h t . Co py iLightweight features of the electrical systemTo develop the new Passat specifically with CO2 savings in mind, various measures were implemented in the electrical system to reduce weight. A saving of up to 3 kg was achieved by the measures described in the overview:•Lighter materials are used (e.g. aluminium wiring).•Control unit installation positions have been optimised to reduce the wire lengths and thereby also weight.urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pun len AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a sss545_116ility ab y li an pt ce•rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enThe use of additional LIN buses means less wiring.•Wiring made from a copper-magnesium alloy with a smaller cross section (0.13 mm2) is used for certain sections.r fo nght rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yi5Overview of the electrical systemDepending on the equipment level, an alternator with an output of either 140 A or 180 A and the following battery types are used in the Passat 2015: • Lead-acid battery • EFB (Enhanced Flooded Battery) • AGM (Absorbent Glass Matt) Also, depending on the equipment and power unit, the 12V battery is installed in the engine compartment or the luggage compartment.urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pun leAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s sAlternatorility ab y li an pt cerrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enElectronics box with relay and fuse holder SB and multifuse prefuse holder SA6AG.Three fuse holders distribute the current in the vehicle: • a non-divided multifuse pre-fuse holder SA in the engine compartment electronics box • a relay and fuse holder SB in the engine compartment electronics box • a relay and fuse holder SC at the bottom left of the passenger compartment, behind the storage compartmentNon-divided multifuse pre-fuse holder SAht rig py Co t.agen lksw Vo byProte cted by c o py rig h t . Co py iThe „front battery” supply conceptr fo ngTo find out the precise location of various fuses and relays, please refer to the relevant current flow diagram in ElsaPro (electronic service information system, professional).es, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngn AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a sss545_010Relay and fuse holder SC at the bottom left of the passenger compartment, behind the storage compartmentility ab y li an pt cerrectness of i t to the co nf o r m spec atio h re n in wit12 V battery in engine compartmentthi sd o cu m enht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yi7Overview of the electrical systemThe „rear battery” supply conceptes, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nDue to limited space, the 12V the luggage compartment in vehicles with 7-speed dual clutch gearbox DQ500, special vehicles and vehicles with an auxiliary heater.AG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a battery is installed in c s sAlternatorility ab y li an pt cerrectness of i t to the co nform spec at i h re o n wit in t hisThe battery is fitted in the luggage compartment on the left behind a trim panel. Four fuse holders distribute the current in the vehicle: • a divided multifuse pre-fuse holder SA in the engine compartment electronics box • a relay and fuse holder SB in the engine compartment electronics box • a relay and fuse holder SC at the bottom left of the passenger compartment, behind the storage compartment • fuse holder SD in the main fuse box on the batteryht rig py Co t.do c um enElectronics box with relay and fuse holder SB and multifuse pre-fuse holder SA8agen lksw Vo byAG.The battery isolator switch J990 is also installed in the main fuse box. The electrical supply to the high-current consumers in the engine compartment is permanently disconnected by the battery isolator switch J990 when an airbag is deployed. Only the ABS control unit J104, the power steering control unit J500 and the consumers in the passenger compartment (fuse carrier SC) are still supplied with current. This means that the vehicle can still be steered, the brake functions remain intact and the vehicle can be exited.Prote cted by c o py rig h t . Co py iDivided multifuse pre-fuse holder SA12V battery in luggage compartment with main fuse boxes, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngAG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s ss545_011Main fuse box with fuse holder SD, positive battery terminal clamp and battery isolator switch J990ility ab y li an pt cerrectness of i t to the co nf o r m spec atio h re n in witthi sd o cu m enRelay and fuse holder SC at the bottom left of the passenger compartment, behind the storage compartmentJump starting pointht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t. C op yi9Networking conceptOverview of the data bus systems usedThe networking concept is based on the MQB and has been enhanced for the Passat 2015 (MQB-B). All CAN buses in the Passat 2015 have a transmission rate of 500 kbit/s. The LIN bus rate is 19.2 kbit/s. The MOST150 data bus with fibre-optic technology and a transfer rate of 150 Mbit/s is new to the Passat. The data bus diagnostic interface J533 contains the control system for several LIN buses and forms the link between the individual CAN bus systems as usual. Further LIN buses are connected to various control units.CAN bus PowertrainCAN bus Running gearCAN bus ConvenienceMOST150 data busCAN bus Infotainmentes, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nAG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s sility ab y li an pt ceCAN bus Diagnostics545_080rrectness of i t to the co nform spec at i h re o n wit in t hisLIN busCAN bus ExtendedKeyJ533do c um enData bus diagnostic interface LIN bus wirec o p yri gh t. C op yiCAN bus extended Running gear CAN bus Infotainment CAN bus Convenience CAN bus LIN busht rig py Co t.CAN bus wirePowertrain CAN bus Diagnostic CAN bus10AG.Prote cted byMOST fibre optic cableagen lksw Vo byThe CAN busesPowertrain CAN busTo allow for the rising number of control units, several of the control units in the Passat that were previously networked in the powertrain CAN bus have been moved to different CAN buses, e.g. J104 and J500.KeyE313 Selector leverwagen n AG. Volks J234 AG dAirbag control unit oes wage s k not l o g yV ua b J533 Data bus diagnostic interface ran ed tee ris o h J583 Control unit for NO sender t o ra x au c ss J623 Engine control unitility ab y li an pt ceun lepe rm itte dJ743 J854 J855 J881 s545_012Mechatronic unit for dual clutch gearbox Control unit for front right belt tensioner Control unit for front left belt tensionerrrectness of i t to the co nform spec a t i h re o n in wit thi ses, in part or in w l purpos hole ercia , is n m ot comLINLINControl unit for NOx sender 2Running gear CAN busr te o iva r rp fo g nAs with the Golf 2013, the Passat 2015 has a separate running gear CAN bus, which connects all control units relevant to the running gear both with each other and with the rest of the vehicle networks.do c um enht rig py Co t.J104 J250 J492 J500 J533 J791 J928 J446AG.s545_014agen lksw Vo byProte cted byc o p yri gh t . C op yiKeyABS control unit Electronically controlled damping control unit Parking aid control unit All-wheel drive control unitPower steering control unit Data bus diagnostic interface Park Assist control unit Control unit for overhead view camera11Networking conceptInfotainment CAN busThe reversing camera is connected directly to the infotainment CAN bus. The image processing control unit in the Passat is part of the reversing camera R189.es, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngAG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s sility ab y li an pt ceLINrrectness of i t to the co nf o r m spec atio h re n in witLVDS MIBMOST150 data busThe MOST connection is used for rapid multimedia data transfer, predominantly image, video and audio data, via a fibre optic cable. Transferring data with the aid of fibre optic cables enables a data transfer rate of 150 Mbit/s. On the optical MOST bus, data is exchanged between the following participating components: control unit in dash panel insert J285 (only with the Active Info Display dash panel insert), digital sound package control unit J525, digital TV tuner R171 and control unit for information electronics J794. The control unit 1 for information electronics J794 is the master of the MOST bus ring.Prote cted byKeyJ364 J412 J525 J533 J685Auxiliary heater control unit Mobile telephone operating electronics control unit Digital sound package control unit Data bus diagnostic interface Display unit for front information display and operating unit control unit (except R and J685 on MIB CAN) Control unit for information electronics Radioht rig py Co t.thi sd o cu m enRAG.R64RX6 R189 MIB LVDS *12agen lksw Vo byc o p yri gh t. C op yiJ794Remote control receiver for auxiliary heating TV tuner Reversing camera CAN bus for the modular infotainment matrix Low-voltage differential signalling on MIB CANConvenience CAN busSince the number of control units has increased, particularly on the convenience CAN bus, numerous systems have been combined into separate LIN buses. Among these is the rotary light switch E1 as a new LIN bus addition.KeyE1 E265 G238 G355 G397 LIN G578 G805 H12 J126 LIN LIN Light switch Operating and display unit for rear air conditioning system Air quality sensor Humidity sender Rain and light sensor Anti-theft alarm sensor Pressure sender for refrigerant circuit Alarm horn Fresh air blower control unitun leJ245 Sliding sunroof adjustment control unit n AG d AG. Volkswage agen oes ksw nClimatronic l ot g o J255 control unit yV ua db ran e s J285 Control tunit ri ee in dash panel insert ho or ut ac control unit a J345 Trailer detector ssility ab y li an pt ceJ362 J386 J387 J388 J389 J400 J501 J519Immobiliser control unit Driver door control unit Front passenger door control unit Rear left door control unit Wiper motor control unit Rear right door control unitrrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enurposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pLINMultifunction unit control unit Onboard supply control unit Steering column electronics control unit Data bus diagnostic interface Rear lid control unit Control unit for electronic steering column lock Driver seat adjustment control unit Rear lid power opening control unit Interface for access and start system Front left seat backrest fan 1 Front left seat cushion fan 1ht rig py Co t.LINJ527 J533 J605 J764 J810 J938 J965 V512 V514 V516 V518AG.Prote cted bys545_016agen lksw Vo byc o p yri gh t. C op yir fo ngFront right seat backrest fan 1 Front right seat cushion fan 113Networking conceptCAN bus extendedThe majority of the control units allocated to the driver assist systems are combined on the CAN bus extended.KeyA27 A31 J428 J502 J533 J667 J668 J745 J769 J770 R242 AFS SF SWTyre Pressure Monitoring System control unit Data bus diagnostic interface Output module for left headlight Output module for right headlight Control unit for cornering light and headlight range control Lane change assist control unit Lane change assist control unit 2 Front camera for driver assist systems Cornering light CAN bus Sensor fusion CAN bus Lane change CAN busr te o iva r rp fo g nes, in part or in w l purpos hole ercia , is n m ot compe rm itte dun leAdaptive cruise control unitAG. Volkswagen AG d agen oes ksw not l o gu yV b d Output module 1 for right LED headlight e SF arant is r ee tho or Output module 1 for left LED headlight u ac a ssAFSility ab y li an pt cerrectness of i t to the co nform spec a t i h re o n in wit thi sSWs545_018Diagnostic CAN busdo c um ena cKeyJ533 a b Data bus diagnostic interface Vehicle diagnostic connection Diagnostic cable c d Connection adapter for wireless connection Suitable diagnostic unit14agen lksw Vo byAG.The diagnostic CAN bus ensures unique and fast communication between the external vehicle diagnostic tester and the electronic vehicle systems using the data bus diagnostic interface J533. Depending on the vehicle diagnostic tester, the data bus diagnostic interface can be connected either the usual way using a cable to the vehicle diagnostic connector or wirelessly. The diagnostic connection in the vehicle is found in the left footwell, below the relay and fuse carrier.ht rig py Co t.Prote cted by c o py rig h t . Co py ibd s545_022CAN bus sub-networksGiven the rising number of control units, it is now necessary to apply individual network areas of a CAN bus as independent sub-networks that are subordinate to the respective data bus. This reduces the flow of data on the higher-level data bus and makes fast data transmission, involving only the relevant control units, easier.Cornering light CAN busThe cornering light CAN bus is a separate network that is subordinate to the CAN bus extended and is only employed with the installation of LED headlights „High”. The cornering light CAN bus combines the control unit for cornering light and headlight range control J745 with the output modules J667/J668 and A27/A31. From this connection, data transfer ensues in connection with: • actuation of the LED multichips for the surroundKeyA27 A31urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pOutput module 1 for right LED headlight Output module 1 for left LED headlight Output module for left headlight Output module for right headlightun leAG. Volkswagen AG d agen oes lighting, dipped beam and main beam (A27/A31) ksw not l o gu yV b AFS a • ra regulation of the control motors for headlight ed nte ris e o control ho s545_142 t range ra au c ss•the dynamic cornering light (J667/668)ility ab y li an pt cerrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enJ667 J668 J745 AFSControl unit for cornering light and headlight range control Cornering light CAN busr fo nght rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig ht . C op yi15Networking conceptSensor fusion CAN busThe sensor fusion CAN bus is a subordinate sub-network within the CAN bus extended. The front camera for driver assist systems R242 communicates directly with the adaptive cruise control unit J428 using the CAN bus to ensure fast and fault-free data transmission. J428 and the camera R242 are also connected directly to the CAN bus extended.SFAG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s surposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pun les545_026ility ab y li an pt ceKeyJ428 SF Adaptive cruise control unit Sensor fusion CAN bus R242 Front camera for driver assist systemsrrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enLane change CAN busKeyJ769 J770 Lane change assist control unit Lane change assist control unit 2 s545_02816ht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t. C op yiThe lane change CAN bus is a subordinate sub-network within the CAN bus extended. The lane change assist control unit J769 uses the lane change CAN bus to communicate directly with lane change assist control unit 2 J770 to ensure fast and fault-free data transmission. In addition, both control units are also connected directly to the CAN bus extended.r fo ngMIB CAN busThe control signals and operating commands are exchanged between the control unit 1 for information electronics J794 and the display unit for front information display and operating unit control unit J685 using the CAN bus MIB (modular infotainment matrix). Image, audio and information data are communicated between these two control units via the LVDS wire.LVDS MIB s545_140KeyJ412 J685 J794 Mobile telephone operating electronics control unit Display unit for front information display and operating unit control unit Control unit for information electronics MIB LVDS CAN bus for the modular infotainment matrix Low-voltage differential signallingLIN bus on the data bus diagnostic interface J533n AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran to the data Two separate LIN buses are connected ed s i tee r o h t or bus diagnostic interface. u ac a ss The diagnostics interface is the master for the two LINility ab y li an pt ceun leLIN 1LIN 2es, in part or in w l purpos hole ercia , is n m ot compe rm itte dbuses.rrectness of i t to the co nform spec a t i h re o n in wit thi ss545_020KeyC J367 J453 J533 U13 Y Alternator Battery monitor control unitThe optional steering wheel heating is the responsibility of J527.Multifunction steering wheel control unit Data bus diagnostic interface Analogue clockr te o iva r rp fo g nDC/AC converter with socket, 12 V - 230 Vdo c um enht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yi17Networking conceptComponent protection and the immobiliseres, in part or in w l purpos hole ercia , is n m ot compe rm itte dun leAG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s ss545_036ility ab y li an pt cerrectness of i t to the co nform spec a t i h re o n in wit thi sKeyJ234 J285 J362 J428 J519 J525 J533 J623 J743 J764 J769 J770 Airbag control unit Control unit in dash panel insert Immobiliser control unit Adaptive cruise control unit Onboard supply control unitJ794 R171Control unit 1 for information electronics Digital TV tuner Immobiliser subscriber Component protection subscriber CAN bus extended Infotainment CAN bus MOST bus CAN bus wire MOST fibre optic cableAG.ht rig py Co t.r te o iva r rp fo g ndo c um enPowertrain CAN busagen lksw Vo byDigital sound package control unit Data bus diagnostic interface Engine control unit Mechatronic unit for dual clutch gearbox Control unit for electronic steering column lock Lane change assist control unit Lane change assist control unit 2Component protectionThe diagnostic interface for data bus J533 is the master for the component protection. A comparison of the component protection subscribers occurs when terminal 15 is switched on. If the comparison result is negative, the respective component disables its function partially or completely and records this in the event memory. The component protection function must then first be enabled online using the vehicle diagnostic tester.18Prote cted byc o p yri gh t. C op yiConvenience CAN busGeneration V immobiliserThe latest immobiliser (WFS) generation V is installed in the Passat 2015. The way that it is used differs considerably from the previous version as the user no longer has to make numerous decisions when adapting the immobiliser in Guided Fault Finding with regard to the installation situation and the actual situation. The user simply has the option of either adapting the immobiliser (yes/no) or repairing it. Further data collection and decision-making is carried out by FAZIT. A new feature in the Passat 2015 is that the control unit for electronic steering column lock J764 is now a convenience CAN bus subscriber. If the optional J743 (mechatronic unit for dual clutch gearbox) is fitted, it is likewise an immobiliser subscriber.The terminal controlIn contrast to the Passat 2011, the control unit for electronic steering column lock J764 in the Passat 2015 is no longer responsible for terminal control in the vehicle but the interface for entry and start system J965 instead. Verification is via discrete wires and via CAN messages.urposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pun len AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a sss545_118rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enility ab y li an pt ceKeyE378 J519 J533 J623 J743 J764 J965Starter button1 2 3 4 5 6Terminal 15 signal 1 Terminal 15 signal 2 S contact Wake-upOnboard supply control unit Data bus diagnostic interface Engine control unit Mechatronic unit for dual clutch gearbox Control unit for electronic steering column lock Interface for access and start system Discrete wirer fo ngTerminal 50 - prompt Start button signalht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yi19LightingThe headlightsThree types of headlight are available for the Passat 2015: • Halogen headlights with conventional long-life bulbs • „Basic” LED headlights using reflector technology • „High” LED highlights using lens technology with Dynamic Light Assist (DLA) and dynamic cornering lights (AFS)Halogen headlightsThe halogen headlights feature the four light functions dipped beam, main beam, side light and turn signal.Side light W5W (5 W)Turn signal WY21W (21 W)Technical featureses, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nAG. Volkswagen AG d agen oes ksw not l o gu yV b s545_081 ara d e nte is r o e Dipped beam th Main beam or ac au H7 (55 W) H9 ss (65 W)ility ab y li an pt ceThe Passat features a warning lamp monitoring function for all conventional versions of the headlights. It uses the dash panel insert as well as the „vehicle menu” in the display of the infotainment system to indicate any defective lamps to the driver. The halogen headlight is equipped with manual headlight range control, which can be re-adjusted using a potentiometer on the rotary light switch. A dynamic headlight range control system is installed on the LED headlight versions.rrectness of i t to the co nform spec at i h re o n wit in t hisdo c um enAG.20ht rig py Co t.agen lksw Vo byProte cted by c o py rig ht . C op yi„Basic” LED headlightsurposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pun leAG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s sThe Passat sees the start of large-scale production of LED technology for headlights at Volkswagen.Main beam module (2x 2-chip LED)Dipped beam module (2x 4-chip LED)ility ab y li an pt cerrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enr fo ngs545_083Technical featuresThe LED lamps are distinguished by light intensity, light spectrum and low power consumption. As with the halogen headlight, the „Basic” LED headlight is based on reflector technology. The LED lamps emit their light against a reflector, which distributes it over the road in accordance with the legislative requirements. The identifying feature of the headlight is a horizontal chain of daytime running light LED/side light LED. The LED chain made of bi-colour LED is used for the daytime running light/side light and turn signal. The LED chain is illuminated white for the daytime running light and side light. It is illuminated orange for the turn signal. The light from the LED chain and the two additional LED in the reflector are dimmed for the side light function. Since the luminous output of the lighting is below 2000 lumen, this version does not require a headlight washer system. The LED headlight versions are equipped with dynamic headlight range control. The dynamic headlight range control works with an inclination sensor (G384 vehicle inclination sender) on the rear axle. If the vehicle features running gear with adaptive chassis control (dynamic cruise control, DCC), the electronically controlled damping control unit J250 makes the information from its sensors available to the headlight range control via the CAN bus. The inclination sensor on the rear axle is not installed in this case.agen lksw Vo byLED chain, 12x bi-colour orange/white LED for daytime running light, side light and turn signalAG.Prote cted byDaytime running light/side light (2x LED)ht rig py Co t.c o p yri gh t. C op yi21LightingDesignThe following components are installed in the LED headlight housing:Housingpe rm itte dun len AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a ssLED output module for dipped beam and main beam headlightLED main beam unitility ab y li an pt cees, in part or in w l purpos hole ercia , is n m ot coms545_034rrectness of i t to the co nform spec a t i h re o n in wit thi sLED dipped beam unit LED turn signal/daytime running light module Bi-colour LED Anode whiteLED output module for turn signal/daytime running light, side lightr te o iva r rp fo g nCathode white Cathode orangeagen lksw Vo byht rig py Co t.do c um enBi-colour LEDThe bi-colour LED in the „Basic” LED headlight is responsible for the daytime running light, side light and turn signal functions. With the „daytime running light” function, the white part of the LED is actuated at 13.5 V with a 100% PWM-signal. If the turn signal is actuated at the same time, the daytime running light is switched off. With the „side light” function, the PWM-signal is reduced to 10% and the LED dimmed in the process. If the turn signal is actuated at the same time, the side light alternates with the turn signal.22AG.Prote cted byc o p yri gh t . C op yiAnode oranges545_120LED dipped beam unitThe LED dipped beam unit consists of the following main components:Reflectors545_040AG. Volkswagen AG d agen oes LED modules 1 and 2 for ksw not l o gu yV b ara beam with heat sink dipped d e nte is r o flanged e on h or ut ac a s sility ab y li an pt cees, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngDaytime running light/side light LED on printed circuitHolder with heat sink functionThe LED modules attached to the top of the holder form a large heat sink with the holder for passive cooling of the LED. The light of the LED is emitted from above into the reflector and distributed over the road in accordance with the legislative requirements. Also attached to the holder is a printed circuit with the daytime running light/side light LED.rrectness of i t to the co nf o r m spec atio h re n in witDipped beam light patternThe LED dipped beam module has to generate a beam of light that meets the legislative requirements. LED modules 1 and 2 serve this purpose. In left-hand drive vehicles, LED module 1 generates the horizontal line while LED module 2 generates the 15° ramp angle (main beam light distribution). This is done by varying the arrangement of the LED chips, reflectors and panels on the LED dipped beam module.thi sd o cu m enHorizontal line 1m 15° raInflection point121ht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig h t . Co py ip22s545_01323LightingLED modules 1 and 2 for dipped beamThe LED modules 1 and 2 each other.pe rm itte dun leAG. Volkswagen AG d agen oes ksw not l o gu yV b ara feature an LED multichip that consists of four LED's placed d e nte is r o eo h t u ra a c s svery closely to eachility ab y li an pt ceModule 1Module 2es, in part or in w l purpos hole ercia , is n m ot comLED multichip 16 WLED multichip 16 Wrrectness of i t to the co nform spec a t i h re o n in wit thi ss545_046The two multichip LED's are connected in series and are supplied from the LED output module for dipped beam and main beam headlight. This LED output module receives the activation and deactivation commands (term. 56b) as well as supply for the lighting directly from the onboard supply control unit J519. Lamp monitoring is also executed by the LED output module for dipped beam and main beam headlight and transfers the information via a diagnostic cable to the onboard supply control unit J519. Furthermore, an NTC resistor is mounted on LED module 1. The resistor works as a temperature sender to monitor the temperature of the LED and, if necessary, to reduce the power supply.r te o iva r rp fo g ndo c um enCircuit Module 1 Diagnosis LED multichip Module 2 LED multichipTerm. 56b NTC resistor Term. 31LED output module for dipped beam and main beam headlightIn the event of repair, the LED modules are always replaced in pairs. Please observe the latest workshop manual concerning this.24ht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig ht . C op yis545_074LED main beam unitThe LED main beam unit consists of the following main components:Reflector LED module for main beam with heat sink flanged onHolder with heat sink function Printed circuit s545_124es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nThe LED main beam unit differs from the LED dipped beam unit in that only one LED module with heat sink is fitted. This LED module features two LED multichips that comprisentwo LED's. olkswaThese gen AGare activated in addition to the dipped AG. V does wage s k notare connected in series and are l beam when the main beam is switched on. The LED o multichips on the LED module gu yV b a d e beam and main beam headlight. Thisra nte output module receives supplied from the LED output module for dipped LED ris o eo h t u ra the activation and deactivation commands a (term. 56a) as well as supply for the lighting directly c from the onboard ss supply control unit J519. Mounted on the LED module, as with LED dipped beam module 1, is an NTC resistor, which works as a temperature sender to monitor the temperature of the LED and, if necessary, to reduce the power supply.ility ab y li an pt cerrectness of i t to the co nform spec at i h re o n wit in t hisLED module with heat sinks545_048 LED multichip 8WLED multichip 8W Circuitdo c um enTerm. 56aNTC resistorTerm. 31 s545_076AG.Prote cted byLED multichipagen lksw Vo byDiagnosisLED multichipht rig py Co t.LED output module for dipped beam and main beam headlightc o p yri gh t . C op yiLED module with heat sink25Lighting„High” LED headlightIn addition to the standard light functions, the High LED headlight always features the following: • Dynamic cornering light (AFS) • Static cornering light with LED technology • Dynamic main beam control (MDF) in conjunction with Dynamic Light Assist (DLA)LED unit for dipped beam-surround lighting (2x 3-chip LED)LED unit for dipped beam and main beam headlight (2x 3-chip LED/4x 1-chip LED)es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s ss545_085 LED chain for daytime running light/side light (20x LED) LED chain for daytime running light/ side light (12x LED)ility ab y li an pt cerrectness of i t to the co nform spec at i h re o n wit in t hisstatic cornering light (2x LED)LED chain for turn signal (12x LED)Technical featuresThe „High” LED headlight uses lens technology, which is also the distinguishing feature of this headlight. The light generated by the LED is passed through a lens and scattered. The beam of light created in this way illuminates the road surface in accordance with the legislative requirements. The headlight features two dipped beam LED units. The LED unit for dipped beam-surround lighting illuminates a ten metre area immediately in front of the vehicle. The LED unit for dipped beam and main beam lights up the usual area beyond the ten metres. For main beam operation, the cylindrical mask in front of the light is changed. For the „dynamic cornering light” function, the LED unit for dipped beam and main beam swivels horizontally with the corner. For the „dynamic main beam control” function, the cylindrical mask in the main beam area adopts further positions to mask off the dazzling part of the main beam.do c um enht rig py Co t.26agen lksw Vo byAG.Prote cted by c o py rig h t . Co py iDesignThe following components are installed in the LED headlight housing:LED module for dipped beam/main beam LED module for dipped beam-surround lighting LED module carrier for dipped beamsurround lighting LED output module for dipped beam/main beam headlight (A27/A31) LED module for static cornering lightLED output module (side light/daytime running light, turn signal)s545_084 Output modules for headlights (AFS/MDF) J667/J668 LED module carrier for dipped beam/main beam headlight LED module for side light/daytime running light, turn signales, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nn AG. Volkswagen AG do es n wage s k l ot g o yV ua b LED module for dipped beam-surround lighting ran ed s i tee r o h t or u ac a The dipped beam-surround lighting lights up an ss area of approx. 10 metres immediately in front of thevehicle. The lighting is activated with the dipped beam and with no control from the AFS/MDF functions. The two multichip LED are also connected in series here and are temperature-monitored by an NTC resistor.ility ab y li an pt cerrectness of i t to the co nform spec at i h re o n wit in t hisReflectorLED multichip 16 WLED multichip 16Ws545_050LED holder with heat sinks545_052ht rig py Co t.do c um enThe LED module for the dipped beam-surround lighting can be replaced individually. Please refer to the current workshop manual for information on this.agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yi27LightingLED module for dipped beam/main beam headlightThe LED module for dipped beam/main beam is responsible for lighting up the area beyond the 10 metres lit up by the dipped beam-surround lighting. To actively cool the LED there is a fan, the speed of which is regulated according to the temperature. The base carrier for the LED module for dipped beam/main beam is a heat sink on which the LED printed circuits are permanently mounted. Installed on the upper and lower printed circuits of the holder are 2 LED's each and a 3-way LED multichip, which are actuated depending on the light function. Installed in the middle is one LED multichip respectively and two simple LED's are fitted to the outside in each case. swa genLED G. Volk AG do The control function here done by the output module for dipped beam and main beam headlight nA ageis es n ksw l o t gu V LED's on the upper and lower o (A27/A31). The 2 printed y ara circuits of the holder are dimmed to 50% if dipped beam db nte ise r is activated. e o circuit is deactivated when the static cornering light is tho The 3-way LED multichip on the lower printed u ra a c s switched on. sility ab y li an pt cees, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nFan (speed regulated according to temperature)rrectness of i t to the co nform spec at i h re o n wit in t hisLED holder and heat sink s545_062ReflectorsUpper LED printed circuit3-way LED multichipdo c um en2 x LEDht rig py Co t.2 x LED 3-way LED multichip Lower LED printed circuit s545_064In the event of repair, the LED module can be replaced individually. Please refer to the latest workshop manual to do this as the module has to be restored to its basic setting.28agen lksw Vo byAG.Prote cted byc o p yri gh t. C op yiDynamic light assist/dynamic main beam controles, in part or in w l purpos hole ercia , is n m ot compe rm itte dun len AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a ssThe High LED headlight always features the Dynamic Light Assist (DLA) function, which is installed in combination with the dynamic main beam control (MDF).ility ab y li an pt cerrectness of i t to the co nform spec a t i h re o n in wit thi sLED module carrier for dipped beam/main beam headlightr te o iva r rp fo g ndo c um enDynamic cornering light control motor V318/V319 (fitted in the housing)The DLA and MDF ensure that the road and its edges are as well lit as possible without dazzling the drivers of vehicles travelling in front or vehicles approaching from the opposite direction. With the aid of the front camera for driver assist systems R242, the system detects other road users as well as their distance to this vehicle and masks part of the light beam in a targeted manner. The light beam is deflected by the cylindrical mask. The cylindrical mask is installed between the LED module for dipped beam/main beam and the lens. For the dynamic cornering light (AFS) function, the whole LED module carrier is swivelled by the dynamic cornering light control motor V318/319. Even with the DLA switched off, the mask ensures that the main beam and dipped beam light functions are available. Furthermore, it regulates the urban light, country road light and motorway light functions in the speed-dependent dipped beam position.Further information about MDF in connection with DLA can be found in the Self-study Programme no. 470 „The Touareg 2011 – Electrical/Electronic System”.agen lksw Vo byAG.Prote cted byControl motor for VARILIS headlight V446/V447s545_086Cylindrical maskht rig py Co t.c o p yri gh t . C op yi29LightingNetworkingThe cornering light (AFS) CAN bus has been supplemented with two control units due to the new „High” LED headlight. The control units A27 and A31 control activation, deactivation and dimming of the light functions of the LED modules (dipped beam/main beam, dipped beam-surround lighting as well as static cornering light) and communicate the diagnostic data for the lamps to the control unit J745. The onboard supply control unit J519 is partly involved in light actuation of the dipped beam light module. Activation or deactivation of the turn signal and daytime running light/side light is executed directly by the onboard supply control unit. The control units J667/J668 are responsible for mechanical movement of the unit for dipped beam/main beam with AFS/MDF and the cylindrical mask. All other light functions are controlled by the n AG. Volkswagen AG do CAN bus from J745. e wageolks yV b ed ris ho t aus no t gu ara nte eo ra curposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pun lessility ab y li an pt cerrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enCAN bus ExtendedAFSCAN bus Convenience LINr fo ngKeyA27 A31 E1 J519 J533 J667 J668 J745 R242 Output module 1 for right LED headlight Output module 1 for left LED headlight Light switch Onboard supply control unit Data bus diagnostic interface Output module for left headlight Output module for right headlight Control unit for cornering light and headlight range control Front camera for driver assist systems V48 V49 V318 V319 V446 V447 AFS Left headlight range control motor Right headlight range control motor Left dynamic cornering light control motor Right dynamic cornering light control motor Control motor for left VARILIS headlight Control motor for right VARILIS headlight Cornering light CAN bus30ht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig h t . Co py is545_024The auxiliary light moduleIf the vehicle is equipped with halogen headlights, theAG. Volkswagen AG ddaytime running light is located in the auxiliary light agen oes ksw not l o gu lower down in the bumper. The front fog light module yV b ara d e nte is r with static cornering light function is also optional in o eo h ut ra a c s this auxiliary light module. sility ab y li an pt cees, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nrrectness of i t to the co nform spec at i h re o n wit in t hisFront fog light/ static cornering lights545_087 Daytime running lightIf the „Basic” LED headlight is fitted, the auxiliary light module of the front fog light features the static cornering light function.do c um ens545_153Front fog light/ static cornering lightIf the „High” LED headlight is fitted, the front fog light is installed in the auxiliary light module.s545_153 Front fog lightsht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig h t . Co py i31Lightinges, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s sility ab y li an pt ceThe tail lightsThe tails lights of the Passat are equipped exclusively with LED technology. Two types are available: Basic and High. On both types, the tail lights are divided into a fixed section and a rear lid section.rrectness of i t to the co nform spec at i h re o n wit in t his„Basic” tail lightsTail light (6x LED)Tail light (6x LED)do c um enTurn signal (6x LED)Brake light (6x LED)„High” tail lightsTail light (8x LED, four of these LED are also used at full brightness for the brake light) Brake light and tail light in light guide (2x LED, one per section) Tail light (8x LED, two of these LED are also used at full brightness for the brake light)Turn signal (12x LED)Brake light (16x LED, four of these LED are also used for the tail light)32ht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig h t . Co py iReversing light (2x LED)s545_139 Rear fog light (2x LED, on one side)Rear fog light (12x LED, on one side)s542_143 Brake light (8x LED, two of these LED are also used for the tail light) Reversing light (8x LED)„High” version light functionsSome LED and LED segments on this version are used more than once for light functions.Light pattern: tail light Tail light Light pattern: tail light with turn signal Tail lights545_145Turn signals545_147es, in part or in w l purpos hole ercia , is n m ot compe rm itte dThe following segments are illuminated for the If the turn signal is activated while the tail lights are tail light: on, the following segments of the tail light will remain • Light guide in fixed section and rear lid section (2x illuminated: n AG. Volkswagen AG do es n wage s k l LED, one per section) • Light guide o o t gu in fixed section and rear lid section yV b ara nteper section) • Row in fixed section (8x LED)rised (2x LED, one e ho t u ra • Row in rear lid section (8x • Row in rear lidosection (8x LED) a LED) c ss The row in the fixed section with the 12 turn signal LED is now illuminated for the turn signal.ility ab y li an pt ceun lerrectness of i t to the co nform spec a t i h re o n in wit thi sLight pattern: brake light with or without tail light Brake light Brake light and tail lightLight pattern: brake light with or without tail light and turn signal Brake light Brake light and tail lightBrake lights545_149ht rig py Co t.agen lksw Vo byAG.For the brake light with or without tail light, the light guide in the fixed section and rear lid section (2x LED, one per section) is lit. The following segments are also lit: • two vertical rows in the fixed section (16x LED, 4 of these are also used dimmed for the tail light) • one vertical row in the rear lid section (8x LED, 2 of these are also used dimmed for the tail light)Prote cted byr te o iva r rp fo g nTurn signal 2x LED and 6x LEDBrake lights545_151The segments are illuminated the same as for „Light pattern: brake light with or without tail light”. Only 8 LED's are available for the turn signal. The 4 common LED's in the two vertical rows are required for the brake light.do c um enc o p yri gh t . C op yi33LightingThe interior lightingThree packages are available for the interior lighting: • Standard package • Light & Sight package • Ambience packageStandard packageThe standard package comprises the following lighting: • Front/rear interior light (with reading lights) • Glove compartment light • Luggage compartment light • Illuminated vanity mirrorLight & Sight packageIn In • Front LED footwell lights • Front door warning lightes, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nn AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran mirror feature LED the Light & Sight package, the front/rear reading lights and the vanity ed s i tee r o h t or addition to the standard package, the Light & Sight package has the following lighting: u ac a ssility ab y li an pt cetechnology.rrectness of i t to the co nform spec at i h re o n wit in t hisAmbience packageIn addition to the Light & Sight package, the ambience package has the following lighting: • Front/rear interior door handle illumination (light 1/lamp for background lighting) • Lamp for front/rear interior door handle illumination • Lamp for front/rear door (light 2 for background lighting) • Rear door warning lightSettings for the interior lighting can be carried out via the infotainment display. The adjacent figure shows the menu option „Background lighting”.ht rig py Co t.do c um en34agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yis545_122Ambience package circuites, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngn AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a ssility ab y li an pt cerrectness of i t to the co nf o r m spec atio h re n in wits545_078KeyE26 F147 F148 J386 J387 J388 J389 J519 K268 K269 L146 L147 L166 L167 L199 L200 L201 L202 L203 L204Glove compartment light switch Driver vanity mirror contact switch Front passenger vanity mirror contact switch Driver door control unit Front passenger door control unit Rear left door control unit Rear right door control unit Front left footwell lightc o p yri gh t . C op yiL221 L222 W6 W14 W20 W30 W36 W37AG.Prote cted byLight for rear driver side interior door handle illumination Light for rear passenger side interior door handle illumination Glove compartment lightthi sd o cu m enFront passenger side illuminated vanity mirror Driver side illuminated vanity mirror Driver side door warning lamp Front passenger side door warning lamp Rear left door warning lamp Rear right door warning lamp Front interior light Rear interior light Switched positive cable Earth Controllable instrument lightinght rig py Co t.Onboard supply control unit Front right footwell lightDriver side door interior handle illumination bulb Front passenger side door interior handle illumination bulb Rear left door ambient lighting bulb Rear right door ambient lighting bulb Light 1 for front left door background lighting Light 1 for front right door background lighting Light 1 for rear left door background lighting Light 1 for rear right door background lighting Light 2 for front left door background lighting Light 2 for front right door background lightingW38WX1WX2 Term. 30G Term. 31 Term. 58dagen lksw Vo by35Dash panel insertThree dash panel inserts are available for the Passat:The Medium dash panel inserts545_095The Colour dash panel inserts545_097Functions and characteristics• • •Functions and characteristicses, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngBlack and white TFT centre display with a The same functions as the Medium plus: resolution of 320 × 240 pixels • Colour TFT centre display Analogue gauges for rev counter, speed, coolant • Screen transitions with animations temperature and fuel Multifunction display showing the following information: - Time, total mileage, trip mileage - Vehicle warning messages in form of symbols and text in 24 languages AG. Volkswagen AG d agen oes ksw change display not l - Selected range, gear o gu yV b ara d e - Onboard computer with efficiency display nte is r o eo th u ra - Outside temperature, ice warning a c s s - Cruise control system display - Speed limiter display - Speed warning - Date - Loudspeaker for acoustic warnings - Service interval - Engine code - Additional driver assist systems - Navigation guidance - Telephone lists - Radio station list - Oil temperature displayility ab y li an pt cerrectness of i t to the co nf o r m spec atio h re n in witthi sd o cu m en36ht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig ht . C op yiThe Active Info Display (AID) dash panel inserts545_099AG. Volkswagen AG d agen oes ksw not l o V gu y b ara d nte ise r o eo h t u ra a c s sility ab y li an pt cees, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nrrectness of i t to the co nform spec at i h re o n wit in t hisWith the Active Info Display (AID), the analogue dial gauges are shown virtually for the first time. The following safety-related warning lamps are still in the form of fixed indicators located above the display: • Turn signal • Warning lamp for exhaust-related faults • Glow period warning lamp for diesel engine • ABS warning lamp • Central warning lamp (observe displayed message) • Warning lamp for faults in the electromechanical power steering • Warning lamp for faults in the brake system • Warning lamp for electromechanical parking brakec o p yri gh t. C op yiThe driver information display can be customised to show additional data for the driving, navigation and driver assist functions in the middle areas of the speedometer and the rev counter.Functions and characteristicsagen lksw Vo bydo c um en• • • • • •12.3" TFT display with a resolution of 1440 x 540 pixels Features all basic functions Different displays can be selected Automatically changing displays depending on the active function Display of 2D and 3D graphics Navigation and media displayAG.ht rig py Co t.Prote cted by37Dash panel insertActive Info Display (AID) designAs with the other MQB dash panel inserts, the Active Info Display has a modular structure. It is connected to the fast MOST bus in order to show images and animations, such as the navigation map, audio covers or telephone contact images in the infotainment system with no loss or delay.es, in part or in w l purpos hole ercia , is n m ot compe rm itte dun leAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s sility ab y li an pt cerrectness of i t to the co nform spec a t i h re o n in wit thi sLoudspeakers545_070 Demand-based fanr te o iva r rp fo g ndo c um enHousing coverBack of printed circuit s545_066 Printed circuit module with frameConventional connector socket of dash panel insert (on back of printed circuit module)38ht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig h t . Co py ies, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo h ut ra a c s sility ab y li an pt cerrectness of i t to the co nf o r m spec atio h re n in witBack of printed circuit s545_068thi sd o cu m enTFT display with heat sinkFront frameht rig py Co t.agen lksw Vo byConnector socket of MOST fibre optic cable (on back of printed circuit module)AG.Prote cted by c o py rig h t . Co py iWarning lampss545_03839Convenience electrical systemThe Keyless Entry and Start Systemes, in part or in w l purpos hole ercia , is n m m ot p o c erm or e t a itte iv r du rp o nl f e ngTwo KESSY systems are available for The standard system is KESSY Press and Drive. Therefore, the Passat does not have a conventional ignition lock.ility ab y li an pt ceAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo th u ra aPassat: Press and Drive and Keyless Access. the c s sKESSY Press and Driverrectness of i t to the co nf o r m spec atio h re n in witThe convenience system in the Passat 2015 has two interior aerials. With the aid of these aerials, the system determines whether an authorised vehicle key is located in the vehicle. The ignition is switched on and the engine is started using the starter button E378. The vehicle must first be unlocked via the remote control (HF signal of 433 MHz).thi sd o cu m enInterior aerial 2 for entry and start system R139Interior aerial 1 for entry and start system R13840agen lksw Vo byStarter button E378AG.ht rig py Co t.Prote cted by c o py rig ht . C op yis545_017s545_058Networkingun leInterior aerialspe rm itte dAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte Wake-up wire is r o eo th u ra a c s sility ab y li an pt ceLINes, in part or in w l purpos hole ercia , is n m ot comHFrrectness of i t to the co nform spec a t i h re o n in wit thi sLFKeys545_082KeyE378 G416 J362 J519 J533 J623 J743 J764 J938Starter button Front passenger door exterior handle contact sensor Onboard supply control unit Data bus diagnostic interface Mechatronic unit for dual clutch gearbox Rear lid power opening control unitProte cted by c o py rig ht . C op yir te o iva r rp fo g nJ965 R138 R139Interface for access and start system Interior aerial 1 for entry and start system Interior aerial 2 for entry and start system Sensor wire Actuatorht rig py Co t.Immobiliser control unitLow frequency (LF) CAN bus wireagen lksw Vo byAG.do c um enEngine control unitHigh frequency (HF)Control unit for electronic steering column lock41Convenience electrical systemAuthorisation procedureSwitching on terminal 15es, in part or in w l purpos hole ercia , is n m ot p om c r erm o e t a itte riv du p or nl f e g nAG. Volkswagen AG d agen oes ksw not l o gu yV b ara d e nte is r o eo th u ra a c s sThe starter button E378 is pressed. The entry and start authorisation control unit J965 processes the signal, wakes the convenience CAN bus and asks the immobiliser control unit J362 whether terminal 15 is allowed to be switched on. To determine whether there are authorised keys inside the vehicle, J965 transmits the search pattern (LF signal of 125 kHz) via the interior aerials for the keys already matched. The authorised key recognises its signal pattern and sends its transponder data at a frequency of 433 MHz to J519. J519 forwards this transponder data to J362. J362 verifies the transponder data. If the key is authorised, J362 sends the command via the convenience CAN bus for release of the electric steering column to the control unit for electronic steering column lock J764. J965 transmits the CAN message to J519 and, at the same time, also via a discrete wire so that terminal 15 is switched on. The remaining CAN buses are woken by the data bus diagnostic interface J533.do c um enility ab y li an pt cerrectness of i t to the co nform spec at i h re o n wit in t hisStarting the engine As soon as all of the data buses are awake, immobiliser communication across all buses can take place. The immobiliser control unit J362 authorises the engine control unit to start the engine if the data match is successful. If a mechatronic unit for dual clutch gearbox J743 is fitted, it subsequently sends its query and authorisation request to the immobiliser control unit J362.42ht rig py Co t.agen lksw Vo byAG.Prote cted by c o py rig ht . C op yiKESSY Keyless AccessAs an option, the standard „Press & Drive” function can be supplemented with the Keyless Access locking and starting system. The Keyless Access KESSY system also makes it possible to lock and unlock the vehicle without a key. The Passat has one additional interior aerial and five external aerials for this system. The rear aerial is also used for the Easy Open system. On the Passat, exterior handle contact sensors are fitted in all four door handles. Fitted in the front door handles for transmission are also aerials for the entry and start system. Furthermore, there is an exterior aerial in the bumper for the rear area and an interior aerial to cover the luggage compartment area. The exterior handle contact sensors are deactivated after 30 hours of inactivity, except for the driver's door, to reduce the no-load current. The sensor in the driver's door is deactivated after 90 hours.un len AG. Volkswagen AG do es n wage s k l ot g o yV ua b ran ed s i tee r o h t or u ac a ssility ab y li an pt cees, in part or in w l purpos hole ercia , is n m ot compe rm itte dapprox. 1.5 mrrectness of i t to the co nform spec a t i h re o n in wit thi ss545_060r te o iva r rp fo g ndo c um enht rig py Co t.agen lksw Vo byAG.Prote cted byc o p yri gh t . C op yi43Convenience electrical systemNetworkingDriver door handleRear left door handleBumperWake-up wireFront passengerLINInterior aerial LFo yV db e s ri ho ut a ssHFage door handle Rear right lkswn AG. Volkswagen AG do es n ot g ua ran tee or acility ab y li an pt ceurposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pun leKeys545_100rrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enKeyE378 G415 G416 G417 G418 J362r fo ngStarter button Exterior handle contact sensor, driver door Exterior handle contact sensor, front passenger door Contact sensor for rear exterior door handle, left Contact sensor for rear exterior door handle, right Immobiliser control unit Onboard supply control unit Engine control unitagen lksw Vo byAG.Prote cted byR134 R135 R136 R137Driver side aerial for entry and start systemPassenger side aerial for entry and start system Rear bumper aerial for entry and start system Luggage compartment aerial for entry and start system Interior aerial 1 for entry and start system Interior aerial 2 for entry and start system Sensor wire Actuator Low frequency (LF) High frequency (HF) CAN bus wireR138 R139J519 J533 J743 J764J623Mechatronic unit for dual clutch gearbox Rear lid power opening control unit Interface for access and start systemControl unit for electronic steering column lockJ938 J96544ht rig py Co t.Data bus diagnostic interfacec o p yri gh t. C op yiAuthorisation procedureUnlocking/locking the vehicle A vehicle key is located in the vicinity of the vehicle. Reaching in to the door handle results in the corresponding exterior handle contact sensor (G415 … G418) reporting this to the interface for entry and start system J965. Control unit J965 wakes up control unit J519 via a discrete wire. Subsequently, the aerial on the same side as the touched exterior door handle sensor transmits a specific search pattern (LF signal of 125 kHz) to the matched keys. Actuating the rear lid handle also has the same effect. The authorised and matched key detects its signal and transmits the rolling code for the central locking and key identification to J519 via an HF signal at a frequency of 433 MHz. Control unit J519 performs a preliminary check of the data for plausibility. AG. Volkswagen AG d If the basic key data is plausible, J519 wakes agen up the convenience oes CAN bus. The key data is sent from J519 to J965. ksw not l o V „OK” to J519. J519 sends a door gu opening command to the door control units J965 checks the data and sends an y b ara d nte se i r via the convenience CAN bus to unlock the doors. o eo h turposes, in part or in wh ole, cial p is n mer m ot p o c erm or e t a itte v i r d pun leau ssra cility ab y li an pt cerrectne s s o f i t to the co n form spec atio h re n wit i n thi sd o c um enReleasing the electronic steering column lock (ESL)Once the driver has entered