TECHNICAL DOCUMENTATION
SSP 635 Audi Q7 (type 4M) Driver assistance systems

This PDF is currently unavailable.
Read document text
Self Study Programme 635 For internal use onlyAudi Q7 (type 4M) Driver assistance systemsAudi Service Training BackForwards Ξ ContentsThe new Audi Q7 - sportiness, efficiency, premium comfortProf. Dr. Ulrich Hackenberg, Audi Board Member for Technical Development said: "The new Audi Q7 is a statement of our competence: Weighing 325 kilogrammes less, it sets the benchmark in its class. It is around 26 % more efficient and is equipped with the latest assistance systems, infotainment modules and connect features." With a kerb weight of just 1,995 kilogrammes (as 3.0 TDI), the new Audi Q7 is the lightest in its class. It weighs 325 kilogrammes less than the previous model. With its lightweight, multimaterial body and an all-new chassis, it is comfortable while at the same time offering the typical performance of a sporty Audi – and that with top-notch 2 values. Audi engineers have reduced the fuel consumption of the Q7 by as much as 28 % (TFSI) and 23 % (TDI). The engines set the standard in the segment of large SUVs with all-wheel drive. The 3.0 TDI developing 200 kW (272 hp) and the 3.0 TFSI developing 245 kW (333 hp) accelerate the new Audi Q7 from 0 to 100 kph in 6.1 seconds (TFSI) and 6.3 seconds (TDI), respectively. The diesel V6 consumes on average just 5.7 l of fuel per 100 kilometers, corresponding to 149 g of CO2 per km. The Audi Q7 also sets standards with respect to the operating concept, infotainment, connectivity and driver assistance systems. The second-generation modular infotainment platform is on board, as is the Audi virtual cockpit. The new MMI all‑in‑touch control unit with large touchpad makes operation child’s play. Other attractive innovations include the expanded services from Audi connect, the Audi tablet for the rear seat passengers and the two sound systems with 3D audio. Smartphone integration with Google Android Auto and Apple Carplay is also new. The new Audi Q7 is one of the first cars world-wide to offer these functions. With its range of driver assistance systems, the new Audi Q7 sets standards that go far beyond the standards in its segment. Some systems have been completely redeveloped from scratch. Standard are the rear parking aid, cruise control, adjustable speed limiter, rest recommendation and the safety system Audi pre sense city. It warns the driver of impending collisions with other vehicles or pedestrians and will initiate heavy braking in an emergency.2ContentsPark assist (third generation)New features of park assist _________________________________________________________________________________________________________________________________ 4 Geometric requirements of parking spaces _______________________________________________________________________________________________________________ 5 New parking scenarios _ ______________________________________________________________________________________________________________________________________ 6 New display and operating concept _______________________________________________________________________________________________________________________ 10 System improvements ______________________________________________________________________________________________________________________________________ 14Rear radar (third generation)Rear radar sensors __________________________________________________________________________________________________________________________________________ 16 Audi side assist (third generation) _ _______________________________________________________________________________________________________________________ 20 Exit warning _________________________________________________________________________________________________________________________________________________ 21 Rear cross traffic assist _____________________________________________________________________________________________________________________________________ 24Front camera for driver assistance systems R242Introduction _________________________________________________________________________________________________________________________________________________ 26 Audi active lane assist ______________________________________________________________________________________________________________________________________ 28 Camera based traffic sign recognition (second generation) ____________________________________________________________________________________________ 30Test your knowledge______________________________________________________________________________________________________________34The Self Study Programme teaches a basic understanding of the design and mode of operation of new models, new automotive components or new technologies. It is not a Repair Manual! Figures are given for explanatory purposes only and refer to the data valid at the time of preparation of the SSP. This content is not updated. For further information on maintenance and repair work, always refer to the current technical literature.!NoteReference3 BackForwards Ξ ContentsPark assist (third generation)Park assist is the name given by Audi to the parking assistance system which scans for suitable parking spaces using lateral ultrasound sensors. Park assist aids the driver by taking over the steering during parking maneouvres. The driver is still in control of accelerating, braking and changing gear.New features of park assistNew parking scenariosThe third generation of the park assist is offered in the Audi Q7 for the first time. The third generation supports the following new parking scenarios: 1. Forward parking into a perpendicular parking space (without previously passing the perpendicular parking space) 2. Forward parking into a perpendicular parking space (after passing the perpendicular parking space)System displays and operationThe system operating concept and displays were radically revised. The following modifications were made: • Graphical displays during the parking maneouvre no longer appear in the instrument cluster, but rather in the MMI display. • Only text messages of the park assist system appear in the instrument cluster. • Detected longitudinal and perpendicular parking spaces are represented graphically in the MMI display. The driver no longer needs to switch back and forth between the various parking modes by pushing the Audi parking system button. The driver selects the applicable parking scenario using the turn-push button.ImprovementsA number of enhancements were implemented with the launch of the third generation. They improve the parking manoeuvre and produce a better parking result. These are: • Map based proximity monitoring • Improved vehicle position sensing • Use of all-wheel steering by park assist • Centre alignment of the car when parking in longitudinal parking spaces • Wider perpendicular parking tolerances reducing the need for corrective manoeuvring in this parking scenario • Use of the speed limiter to avoid early termination of assistance due to excessively high parking speedThe enhancements are described in greater detail on the following pages.4 BackForwards Ξ ContentsGeometric requirements of parking spacesThe geometric requirements (length and width) for a parking space to be classified as suitable by park assist are model dependent and are redefined for every new model. The park assist of the Audi Q7 assesses the parking space as "suitable" if the following criteria are met:Parking space length: Longitudinal parking space length pL vehicle length l + 0.9 m635_001Perpendicular parking space: Perpendicular parking space width pQ vehicle width b + 0.95 m635_002Reference For information about the second generation park assist, refer to Self Study Programme 600 "Audi - New driver assistance systems 2011".5 BackForwards Ξ ContentsNew parking scenariosForward parking without previously passing a perpendicular parking spaceThe parking scenario could look like this: The driver drives to a supermarket with the intent of parking the car there. Supermarket car parks typically comprise rows of perpendicular parking spaces. The driver passes the perpendicular parking spaces and chooses a suitable perpendicular parking space, then proceeds towards the parking space and forward parks into the parking space. Due to the tight space, however, the driver cannot manoeuvre the car fully into the parking space in a single operation. The driver brings the car to a stop in the parking space.635_0036 BackThe driver now has the option of the completing the parking maneouvre with the aid of park assist. If this has not been done already, the driver now activates park assist using the button in the centre console. The system has recognised the specific parking scenario of "forward parking without previously passing a perpendicular parking space". This is detected by means of ultrasound sensors which provide information about the two adjacent vehicles. Parking assistance is activated by selecting reverse.Forwards Ξ ContentsDuring the reversing manoeuvre, the driver must wait until park assist provides audible feedback indicating that it has been activated. Otherwise, parking assistance is terminated early. Park assist now takes over the steering and the driver manoeuvres out of the parking space again. As soon as a suitable turning point is reached, the system alerts the driver by a graphic and by an audible signal.635_004The driver now changes direction and manoeuvres into the parking space again. If further corrective manoeuvring is needed, this is indicated to the driver by a graphic and by an audible signal. Up tofour corrective manoeuvres are possible. Park assist stops at the latest after the fourth corrective manoeuvre, regardless of the parking result.635_0057 BackForwards Ξ ContentsForward parking after previously passing a perpendicular parking spaceIn this parking scenario, the driver initially bypasses occupied perpendicular parking spaces and then passes a vacant perpendicular parking space. Park assist has already been activated, with the result that a vacant parking space is shown in the MMI display shortly after passing the parking space. The driver continues a short distance until prompted via the display to brake and to select reverse. The driver can now decide whether to drive forward or reverse into the perpendicular parking space. Both alternatives are supported by park assist. In this case, the driver decides to forward park the car. After selecting reverse, park assist takes over the steering. The driver can now reverse.635_0068 BackThe car is now manoeuvred into a position from which the driver can forward park into the perpendicular parking space.Forwards Ξ ContentsOnce in this position, the driver is prompted to brake and select a forward gear.635_007The driver then drives forwards into the parking space, and park assist continues to steer t he car. If further corrective manoeuvring is needed, this is indicated to the driver by a graphic and by an audible signal. A maximum of four corrective manoeuvres are possible.Park assist stops at the latest after the fourth corrective manoeuvre, regardless of the parking result.635_0089 BackForwards Ξ ContentsNew display and operating conceptThe display and operating concept was radically revised for the launch of the third-generation park assist system. Up until the second-generation, the park assist graphics were displayed in the instrument cluster. In the third generation and higher, the graphics appear in the MMI display. The MMI screen offers sufficient space to display all relevant information simultaneously. In addition, the display content is no longer obscured temporarily by the turning steering wheel. Only text messages indicating detected faults, reasons for an early system deactivation and termination of assistance are displayed in the instrument cluster.Drive forward to start parking manoeuvre.Look! Safe to move?635_00910 BackForwards Ξ ContentsNew graphics of the park assist systemSearch mode If the activated park assist is searching for parking places but has not yet found a suitable one, graphic 1 appears in the MMI display. In countries where traffic drives on the right-hand side of the road, the parking space situation on the right-hand side of the road is displayed by default. If the driver wants to park on the left-hand side of the road, this is done by activating the left turn signal. In countries where traffic drives on the right-hand side of the road, the converse applies.Look! Safe to move?The system always searches on both sides of the road for parking spaces, but only one side of the road is shown in the MMI display. This means that after activating the turn signal the correct parking space situation can also be immediately displayed on the other side of the road. Parking spaces can however only be detected if the maximum allowable speed for search mode is not exceeded. Suitable perpendicular parking places can be detected up to a speed of 20 kph and longitudinal parking places up to a speed of 40 kph.Graphic 1635_010To achieve an excellent parking result, a driving speed of 30 kph should not be exceeded when searching for a parking space. During the search, a distance of between 0.5 m and 2 m to parked vehicles must be maintained. For best parking results, a distance of about one metre should be maintained.Graphics on the left edge of the screen The three parking scenarios supported by park assist are displayed on the left edge of the screen. Beginning with the top graphic, these are the following scenarios:1. Reverse parking into a longitudinal parking space2. Forward parking into a perpendicular parking space3. Reverse parking into a perpendicular parking spaceIf park assist has detected a suitable longitudinal parking space, the upper graphic is actively displayed; otherwise it is greyed out. If park assist has detected a suitable perpendicular parking space, the two lower graphics are actively displayed; otherwise they are greyed out. Graphic 2 shows a situation in which park assist has detected a suitable perpendicular parking space, but not a suitable a suitable longitudinal parking space. If the parking space situation on the left-hand side of the road is shown, the three parking scenarios are shown on the right edge of the screen.Graphic 2635_01111 BackPerpendicular parking space detected Park assist has detected a suitable perpendicular parking space on the right-hand side of the road. For this reason, the bottom two parking scenarios are shown as currently selectable on the left edge of the screen. These are the two parking scenarios for forward and reverse parking into a perpendicular parking space. If a perpendicular parking space is detected, park assist always suggests reversing into the perpendicular parking space. For this reason, the bottom of the three parking scenarios is highlighted by a red border. The graphic for reverse parking into the perpendicular parking space also appears at the right edge of the screen. The difference between this graphic and the graphic for forward parking is the position of the perpendicular parking space within the hatched area. The different positions of the perpendicular parking spaces can easily be seen by comparing graphics 4 and 5.Forwards Ξ ContentsDrive forward to start parking manoeuvre.Look! Safe to move?Graphic 3635_012If the car is travelling at a speed of less than 8 kph, a white arrow appears on the car and the message "Drive forward to start parking manoeuvre" is displayed. At speeds of greater than 8 kph, the brake symbol appears immediately together with the text message "Stop to start parking manoeuvre".When the car is in a suitable position for the parking manoeuvre, graphic 4 is displayed.12 BackBrake car The car is now in a position far enough away from the perpendicular parking space to start the parking manoeuvre. This is indicated by a grey letter "P" in the parking space. The brake symbol denotes that the driver must now bring the car to a stop in order to make use of the available perpendicular parking space. The text message "Stop to start parking manoeuvre" appears in the graphic. The driver brings the car to a stop.Graphic 4Forwards Ξ ContentsStop vehicle to start parking manoeuvre.Look! Safe to move?635_013Select reverse to start parking manoeuvre. As the driver prefers to forward park into the perpendicular parking space, he selects the corresponding parking scenario in the centre using the turn-push button. This is now highlighted by a red border. The graphic on the right edge of the screen adapts to the new parking scenario.Please select reverse gear and let go of the steering wheel.Look! Safe to move?Graphic 5635_014Forward parking The driver selects reverse and waits until the park assist activation tone sounds. Park assist now takes over steering the car. The driver is still in control of accelerating, braking and changing gear. The park assist screen or the image of the reversing camera now appears in the MMI display. Park assist steers the car in such a way that it reverses past the perpendicular parking space again. If there is enough space available, it aligns the car relative to the parking space in such a way that it can park forward into the parking space on the next pass. If necessary, between one and a maximum of four corrective maneouvres now follow until park assist stops.13 BackForwards Ξ ContentsSystem improvementsMap based proximity monitoringThe more information park assist has about its surroundings, the easier it is for it to plan and implement a parking manoeuvre. It must therefore gather as much proximity data as possible via its ultrasound sensors and then use this information to execute the parking manoeuvre. The second-generation park assist utilised only the two front side ultrasound sensors for this purpose. These two sensors have a wider measurement range than the other ten ultrasound sensors and are utilised specially for measuring parking spaces. The third-generation park assist system utilises the data received from all 12 ultrasound sensors. The gathered data is entered into a "map" in the control unit which maps the immediate vicinity of the car. This two dimensional map is produced by park assist itself and is dynamic. This information is lost when the ignition is turned off. Park assist utilises, among other things, the dynamic map to make corrective adjustments to the parking trajectory. If an obstacle is registered and measured more precisely during the parking manoeuvre or if a new obstacle appears, the system makes allowance for this new information during the subsequent parking manoeuvre.Improved vehicle position sensingDuring the parking manoeuvre, park assist needs to know where the car is located and how it is aligned. Park assist can, based on this information, make corrective adjustments which steer the car back onto the computed parking trajectory, if need be. Up until the second generation of park assist, the two rear wheel sensors of the ESC system were used for this purpose. The third generation, by contrast, evaluates all four wheel sensors and can thus determine the position of the car much more precisely. This produces better parking results, helps eliminate the need for corrective manoeuvring and, in particular, optimises parking on the kerb.Utilisation of all-wheel steering by park assistif an Audi Q7 is equipped with the optional all-wheel steering, park assist draws on the advantages of this additional steering system. Park assist does not utilises the full steering range of the all-wheel steering, but a rather limited range of +/- 3 degrees. When reversing into a perpendicular parking space, for example, all-wheel steering allows further corrective adjustments to be made, with the result that the vehicle comes to a halt in the centre of the parking space. This eliminates the need for further corrective maneouvring. In cars with all-wheel steering park assist provides more leeway for planning parking trajectories since tighter curve radii are possible.14 BackForwards Ξ ContentsAlignment in the centre of longitudinal parking spacesThe third-generation park assist optimises the end position of the car during assisted longitudinal parking manoeuvres. Basically, a distinction is made between two cases:1. Longitudinal parking space length pL vehicle length l + 2.40 m: Park assist positions the vehicle midway between the two vehicles between which it has parked.635_0152. Longitudinal parking space length pL vehicle length l + 2.40 m: Park assist positions the car in such a way that it is parked 1.20 m away from the vehicle in front.635_016Use of the speed limiterThe second-generation park assist system will end park assistance early if the speed threshold of 7 kph is exceeded while reversing. In the third-generation system, termination of assistance cannot occur due to excessively high speed when reversing. A speed limiter stops the car from exceeding the maximum allowable speed. The speed limiter is a software function in the engine control unit which intervenes in the engine management when necessary. The speed limiter is standard equipment on the Audi Q7. The quality of the parking result improves with decreasing parking speed. For this reason, the third-generation park assist has a reduced maximum parking speed of 5 kph. Faster steering manoeuvres at a higher speed are challenging to the electromechanical steering. The resultant deviations from the computed parking trajectory produce a poorer final outcome. This effect is further increased by wide tyres on the car.15 BackForwards Ξ ContentsRear radar (third generation)Rear radar sensorsThe two radar sensors mounted on the rear bumper are referred to as "rear radar". Previously, they were used by Audi side assist and Audi pre sense. In the Audi Q7 they are used by two additional, new driver assistance systems.These are: • Exit warning • Rear cross traffic assistDespite their extended functional range, both wheel sensors have the same designations: • Audi side assist control unit J769 (master control unit) • Audi lane assist control unit 2 J770 (slave control unit)The two radar sensors combine with their control units to form a unit. The master control unit is installed on the right-hand side ofthe car. This is also the case with RHD models.Terminal 30 Terminal 31Audi side assist control unit 2 J770Private CANAudi side assist control unit J769Extended CAN635_017Control units J769 and J770 communicate via a Private CAN bus. In addition, they are connected via the Extended CAN bus. In the second-generation rear radar, only the master control unit J769 was connected to the Extended CAN bus.The master control unit and the slave control unit communicated with one another exclusively via Private CAN bus.16 BackForwards Ξ ContentsDiagnostic addresses of both control unitsConnecting the slave control unit J770 to the Extended CAN bus offers two advantages: 1. The slave control unit J770 can be directly diagnosed without using the master control unit J769. 2. The slave control unit J770 can be flashed more efficiently with new software. It not necessary to take the indirect route via the master control unit J769 to flash the control unit.As both control units can be addressed directly by the diagnostic tester, the slave control unit also requires its own diagnostic • Diagnostic address of master control unit J769: 3Caddress. The diagnostic addresses of both control units are:• Diagnostic address of slave control unit J770: CFComponent protectionA further innovation is the integration of both control units into the component protection system. Due to the fact that they are mounted on the rear bumper, they are more easily accessible from the exterior than the control units fitted inside the vehicle. The component protection system demands that control units be adapted online with the diagnostic tester when they are installed on another vehicle. If this is not done, the functionality of the control unit will be limited.HardwareThe third-generation rear radar features an all-new generation of radar sensors. The key differences between the radar sensors of the second and third generation are summarised in the following table.Generation of radar sensorsSecond generationThird generation635_018635_019Manufacturer Radar frequency Dimensions Weight Transmitter aerials Receiver aerials Power consumption Angular range Rear sensing range Lateral sensing rangeHella 24 GHz 82 x 130 x 35 mm 265 g each One Three 6.2 W 120 degrees 70 m 10 mBOSCH 77 GHz 70 x 60 x 30 mm 195 g each Two Four 8.4 W 150 degrees 70 m 50 m17 BackForwards Ξ ContentsArea covered by the sensorsTo implement the new "rear cross traffic assist" system, it was necessary to extend the sensing range of the radar sensors. The radar sensors must now cover a range of 50 m on each side of the car.Distance [m]Distance [m]Rearward radar beamSideways radar beamDistance [m]Total area monitored635_020The entire sensing range covered by the two radar sensors. One radar sensor is responsible for monitoring the rear left and the other for monitoring the rear right. The sensing range of each of the individual radar sensors is covered by two different radarbeams. They are produced alternately by the two radar sensor transmitter aerials. The system switches back and forth between the two radar beams approximately 15 times a second.18 BackForwards Ξ ContentsInstallation location of the rear radar sensorsThe new radar sensors are no longer mounted directly on the car body. They are fixed to a bracket which is attached the bumper cover.Radar sensor attachment to bracket635_021Installation location of rear left radar sensor635_022Due to the extended lateral sensing range of the radar sensors, their installation location on the bumper cover has been moved further outwards. In addition, they are turned sideways at a largerangle. This is now 40 degrees as compared to 22 degrees in the second-generation rear radar.Installation locations of the two radar sensors on the bumper cover635_02319 BackForwards Ξ ContentsAudi side assist (third generation)In functional terms, the Audi side assist in the Audi Q7 is to a large extent a carry-over from the existing system. The only major modification is the reduction in activation speed to 15 kph. If this speed is exceeded, the system is activated provided that it is switched on. If the speed again drops below the 10 kph threshold, it is deactivated. The hysteresis of 5 kph between the activation speed and deactivation speed serves to stabilise the activation state of the system at speeds within the 10 kph to 15 kph range. There is no longer a separate button for Audi side assist on the Audi Q7. The system can switched on or off in the MMI driver assistance menu under the menu item Audi side assist. The same settings menu is also used for setting the brightness of the warning lights.Active Audi side assist warning light in the left door mirror635_024Reference For further information on the functional principle of "Audi side assist", refer to Self Study Programme 375 "Audi Q7 – New driver assistance systems". This booklet deals with the first generation of the Audi side assist.20 BackForwards Ξ ContentsExit warningThe task of the exit warning is to monitor the rear side periphery when the car is stationary. The actual monitoring is done by the two rear radar sensors. If traffic is detected approaching from behind, the vehicle occupants are warned when opening the car doors. The warning is provided by a LED strip in the door, which flashes four times together with the Audi side assist warning light in the door mirror. This function is available in all four vehicle doors.The system helps aviod collisions with vehicles in specific traffic situations. The diagram shows a typical situation in which careless opening of the driver door could lead to a collision. The sameapplies to careless opening the rear left car door. In this case, too, a warning is given.Danger of collision with approaching vehicle when opening the driver door635_025The system helps avoid of collisions with cyclists/motorcyclists in specific traffic situations provided that the cyclists/motorcyclists are detected by the system. The diagram shows a typical situation in which careless opening of the front passenger door could lead to a collision. The same applies to careless opening the rear right cardoor. In this case, too, a warning is given. Note, however, that approaching cyclists or moped riders cannot be identified in certain circumstances.Danger of collision with approaching cycle when opening the front passenger door635_02621 BackForwards Ξ ContentsSwitching the exit warning system on or offThe exit warning can only be switched on and off with Audi side assist. This setting option can be found in the MMI driver assistance menu under Audi side assist.Run-on cycle after turning off the ignitionAs the exit warning also has to be functional when the ignition is off, the rear radar sensors are not connected to terminal 15, but rather to terminal 30. Turning off the ignition initiates a 180second run-on cycle during which the exit warning function remains active. When this cycle ends, the exit warning self-deactivates. The run-on cycle will end early if the car is locked during the 180-second period or if demanded by the battery energy management system.Advance cycle after unlocking the car and opening a car doorThe exit warning also has an advance cycle. This also has a duration of 180 seconds and begins when the car is unlocked and any car door is subsequently opened. If the ignition is not turned on before expiration of the 180-second cycle, the exit warning self-deactivates again.LED strip warning elementThe LED strips are installed in the car doors if the car has one of the two optional interior light packages or the exit warning system. None of the three options would be possible without LED strips. Each of the LED strips has two LED coupling points. If exit warning is ordered, a red LED used only by the exit warning is fitted. The two interior light packages require either a white LED or a multi-colour LED. The multi-colour LED is an RGB light emitting diode. If both an interior light package and the exit warning are fitted and an exit warning is issued, the LED is switched off for the warning duration of the interior light package and only the red LED is activated.Warning of exit assistant when opening driver's door635_027Optional exit warningIn the case of the Audi Q7, exit warning comes automatically with Audi side assist. Audi side assist can be ordered separately as optional equipment, but is also part of the "City" assistance package.22 BackForwards Ξ ContentsOverviewThe third-generation rear radar includes the following modifications: • Control units J769 and J770 are supplied with terminal 30. • Control units J769 and J770 are both connected to the Extended CAN bus. • Audi side assist warning lights K233 and K234 are activated by the two front door control units J386 and J387. • Exit warning lights W111, W112, W113 and W114 are also activated by the accompanying door control units. • Now only six lines lead to control units J769 and J770: two lines for power supply and the four CAN bus lines of the two CAN bus systems.Terminal 30 Terminal 31Audi side assist control unit J769Private CANAudi side assist control unit 2 J770Extended CANK233Data bus diagnostic interface J533Convenience CANDoor control unit, driver side J386LIN busDoor control unit, rear driver side J926W111 K234W113Door control unit, front passenger side J387LIN busDoor control unit, rear passenger side J927W112W114635_028K233 K234 W111 Audi side assist warning light in driver side door mirror Audi side assist warning light in front passenger side door mirror Exit warning light, driver sideW112 W113 W114 Exit warning light, front passenger side Exit warning light, rear driver side Exit warning light, rear passenger side23 BackForwards Ξ ContentsRear cross traffic assistFunctionThe task of "rear cross traffic assist" is to warn the driver about traffic crossing behind the vehicle while reversing. This system provides valuable assistance in situations where visibility is impaired. Impaired visibility situations include manoeuvring out of a perpendicular parking space or reverse parking out of a driveway.Danger of collision with approaching cross traffic when parking in reverse635_029In the case of the Audi Q7, rear cross traffic assist can be ordered both as an individual option or as part of the "City" assistance package. A requirement for ordering rear cross traffic assist is,however, that the car has both Audi side assist and park assist plus. Park assist plus is the minimum requirement for the park assist system, which must be fitted in the car.Activation of rear cross traffic assistRear cross traffic assist is activated whenever park assist is activated. This means that the driver cannot switch the system on or off separately. When the driver activates park assist, rear cross traffic assist is simultaneously activated as well.24 BackForwards Ξ ContentsSystem warningsRear cross traffic assist computes a collision probability if the rear wheel sensors detect cross traffic. It issues different warnings depending on the computed collision probability.The system differentiates between the following collision probabilities:Collision responsibility Very low LowWarning None VisualTime until a possible collision From approx. 4 secondsBoundary condition Vehicle stationary, driving forward 7 kph or reversing at up to 15 kph Only possible when reversing Only possible when reversingMedium HighAudible TactileFrom approx. 3 seconds approx. 1 secondVisual warningIn the case of the visual warning, a red surface with black directional arrows is shown behind the rear end of the car. The arrows point in the direction in which the approaching cross traffic is moving. The red-coloured surface is displayed on the right behind the rear end of the car if cross traffic is approaching from the right, and on the left behind the rear end of the car if cross traffic is approaching from the left. If cross traffic is approaching from both sides, the red-coloured surfaces are displayed both on the left right behind the rear end of the car.Look! Safe to move?635_030The park assist plus graphic is a minimum requirement for the generation of a visual warning by rear cross traffic assist. If a reversing camera or an optional surround view camera is fitted in the car, the warning also appears in the camera images currently on display. If a warning is issued, two red directional arrows are displayed in the camera images. These arrows also point in the direction in which the approaching cross traffic is moving.Rear viewLook! Safe to move?635_031Audible warningThe rear acoustic signal generator of park assist is utilised to generate the audible warning. As park assist plus is a requirement for rear cross traffic assist, the rear acoustic signal generators are always fitted in the car.Tactile warningIf a high collision probability is detected, rear cross traffic assist generates a tactile warning in the form of a brake jerk. The instruction to initiate the brake jerk is given to the ABS control unit J104 by the Audi side assist control unit J769.25 BackForwards Ξ ContentsFront camera for driver assistance systems R242IntroductionDue to the higher quality requirements and the integration of additional assistance systems, the Audi Q7 employs a newly developed front camera for driver assistance systems. It is installed in the same position as in the preceding model. The resolution of the camera was increased to 1280 x 960 pixels and therefore is higher than 1 megapixel for the first time. The higher resolution provides longer range and allows better detailed evaluation of objects in the immediate vicinity. The predecessor generation has a resolution of 1024 x 512 pixels. The vertical and horizontal camera aperture angles were also enlarged. This enables the camera to capture better images of the area immediately ahead of the car. The horizontal aperture angle was increased from 40 degrees to 44 degrees and the vertical aperture angle from 26 degrees to 34 degrees.635_032The front camera is required for the following systems:• Audi active lane assist • Camera based traffic sign recognition • Basic version of main beam assist (main beam and dipped beam only) • MatrixBeam main beam assist in conjunction with Audi Matrix LED headlights • ACC Stop & Go • Traffic jam assist • Audi Pre sense front • Audi Pre sense cityOptical camera connection to windscreenThe front camera uses a new optical concept for transmitting ambient light to the image capture sensor. Between the windscreen and the image capture sensor there is a prism which is optically coupled to the windscreen by a silicon pad. The prism has the task of diffracting the ambient light in such a way that it impinges optimally on the image capture chip. For this reason, the camera optics no longer have to be aligned straight ahead facing the area in front of the vehicle. This configuration offers several advantages: By diffracting of ambient light, the prism allows the size of the light ingress surface on the windscreen to be greatly reduced. The light ingress surface required for the front camera is less than one third of that in the preceding model. In additon, there is no need for an air-filled space between the image capture sensor and the windscreen. This means that less dust and dirt can impair image quality in this area. There is also less of a problem with fogging and icing.26 BackForwards Ξ ContentsIntegration of the front camera into the vehicle electronicsThe front camera for driver assistance systems R242 is connected to the FlexRay for the first time in the Audi Q7. The extended CAN bus connecitng lines previously used by the front camera for communication are no longer needed. If the car is fitted with the optional Audi Matrix LED headlights, two CAN bus lines lead to the front camera. The front camera supplies the necessary information on oncoming traffic and vehicles in front to the control units of the Matrix LED headlights via these lines.Terminal 15 Terminal 317.5 AFront camera for driver assistance systems R242FlexRay IN CAN sub-bus systemFlexRay OUT635_033Installation location of the front camera635_03427 BackForwards Ξ ContentsAudi active lane assistThe active variant of Audi side assist can be ordered for the Audi Q7 (type 4M). The official designation of this option is Audi active lane assist. Only Audi lane assist was available with the preceding model. It was not possible to offer the active variant because this model had hydraulic steering and the electromechanical steering is required for corrective steering.In the case of Audi active lane assist, two forms of assistance are offered: 1. The first variant helps the driver stay in lane. To this end, a corrective steering input towards the centre of the lane is initiated shortly before the car crosses the lane marker line. However, this action is only taken if the turn signal has not been activated. This variant is activated by setting the steering input of Audi active lane assist to "late" in the MMI driver assistance menu. 2. The second variant helps the driver to keep the car in the centre of the lane at all times. To this end, corrective steering inputs are initiated whenever the car leaves the centre of the lane. This variant is activated by setting the steering input of Audi active lane assist to "early" in the MMI driver assistance menu.Version 1: Warning against leaving lane635_035Version 2: Lane guidance635_03628 BackNew features:Forwards Ξ ContentsIn comparison with the Audi active lane assist in the Audi A6 or Audi A7 (C7 platform), the following new features have been integrated into the function: • The introduction of the new front camera further improves the quality of lane detection, which, in turn, increases the reliability of the system. • The system detects whether the driver has hands on the steering wheel or not when Audi lane assist is active. If the system detects that the driver has taken hands off the steering wheel, Audi active lane assist reacts as follows: The system warns the driver audibly and visually and prompts the driver to take the steering wheel again. If this does not happen within two seconds of the warning being issued, Audi side assist selfdeactivates. • The parameters for holding the car in the centre of the lane were improved for the "early" steering input setting. This makes the system assistance more tangible for the driver. The system guides the car back to the centre of the lane more noticeably. This enhances ride comfort, particularly on motorways. • In specific situations when the turn signals are activated, Audi active lane assist intervenes in the steering and warns the driver. This is the case if Audi side assist indicates a vehicle in the blind spot on the adjacent lane into which the driver wishes to move. This additional function is only available if both Audi active lane assist and Audi side assist are installed on the car.Audi active lane assist: please take over steering.635_037Reference For more detailed information about Audi active lane assist, refer to Self Study Programme 483 "Audi A7 Sportback – Convenience electronics and Audi active lane assist".29 BackForwards Ξ ContentsCamera based traffic sign recognition (second generation)The second generation of the camera based traffic sign recognition system is available for the Audi Q7. It is based on the speed limit display, which was offered for the first time with the launch of the Audi A7 Sportback in 2010. The speed limit display was renamed the "camera based traffic sign recognition system" with the launch of the Audi A3 (type 8V) in 2012, as it also detects and displays no overtaking zones. The camera based traffic sign recognition system uses both traffic signs detected by the front camera for driver assistance systems R242 and information on traffic signs detected by MMI Navigation Plus. The navigation data is transmitted as so-called predictive route data and provides information on the route segments ahead. The traffic signs detected by the camera have a higher priority. If the detection of traffic signs by the front camera is not possible, the system self-deactivates. This can occur for example due to a dirty or frozen windscreen or due to leaves on the windscreen impairing the visibility of the camera.New features of the second generationThe second-generation traffic sign recognition system features the following modifications: • The driver can have a warning issued if speed limits are exceeded. • The system detects residential streets with speed restrictions throughout Europe and place name signs in some markets. The place name signs and the signs for residential streets with speed restrictions are however not displayed by the system. The system utilises the signs to adapt the displayed speed limits to the new speed limits at the right point in time. • The ACC (Adaptive Cruise Control) can adopt speed limits detected by the traffic sign recognition system and utilise them for speed regulation. • When towing a trailer, a type-specific trailer speed must must be set for the towed trailer. • The markets in which traffic sign recognition is available were extended to include the following markets: • European markets • Albania • Bosnia-Herzegovina • Estonia • Latvia • Lithuania • Macedonia • Moldavia • Montenegro • Serbia • Cyprus • Markets in North America • USA • CanadaReference For further information about the speed limit display, refer to Self Study Programme 482 "Audi A7 Sportback head-up display and speed limit display".30 BackForwards Ξ ContentsDisplay of detected traffic signsThere are three different options for the display of detected traffic signs: • Full-screen display in the instrument cluster • The advanced display in the instrument cluster • The content of the optional head-up displayFull-screen displayUp to three traffic signs can be depicted on the full-screen display. This can be up to three speed limits or two speed limits and one no overtaking sign. The speed limits can have different additional signs.Traffic signs635_038The following additional signs are supported:Time635_039Fog635_040Wet635_041Trailer635_042Extended displayThe advanced display can only show traffic signs. This is always a speed limit with, where applicable, an additional sign. Taking the current conditions into account, the full-screen display prioritises and then displays one of the speed limits. Current conditions may include the time of day, detection of a trailer, the operating status of the windscreen wipers or the operating status of the front and rear fog lights.Speed635_04331 BackForwards Ξ ContentsTraffic sign based speed warningIn the second-generation traffic sign recognition system and higher, a driver warning can be generated if a displayed speed limit is exceeded. This is a visual-only warning in which the displayed traffic sign begins to flash. If there is an additional sign under the traffic sign, this sign remains static and does not flash when a warning is generated. The traffic sign flashes at a frequency of approximately 1 Hz.Option for setting the speed offsetThe driver has the option of setting the speed offset for the speed warning. To this end, the driver first selects the speed warning in the driver assistance systemsn menu of the MMI. The driver can switch the system off or switch the system on with one of the pre-set speed offsets under the menu item "Traffic sign based".Driver assistSpeed warningTraffic sign based manualoffSetting the speed offset for the traffic sign based speed warning635_044Values of between 0 kph and 15 kph are offered to the driver as speed offsets. If the driver selects an offset of, say, 10 kph, and thespeed limit is 70 kph, a warning will not be generated until a speed of 81 kph is reached.Basic version of the speed warningIn addition to the traffic sign based speed warning, the manually adjustable speed warning is also available. In the case of the manual speed warning, a speed threshold can be set using a virtual knob. If this speed is exceeded, an audible warning is generated. This version of the speed warning is already available in many Audi models and works fully independently of the traffic sign based speed warning.!32Note When the ignition is turned off, the set speed offset is always stored together with the number of the car key currently in use in the front camera for driver assistance systems R242. This offset is then reused the next time the ignition is turned on using this specific car key. BackForwards Ξ ContentsAutomatic trailer detectionIn the driver assistance systems menu in the MMI there is the menu item "Traffic sign recognition". the "automatic trailer recognition" can be found under this menu item. This options box is, however, only available in the car is supplied factory-fitted with an electric swivelling towbar and therefore has a trailer recognition control unit J345. If "automatic trailer recognition" is activated and a trailer is electrically connected to the car, speed limits are also displayed for cars towing a trailer. The trailer recognition control unit J345 signals a detected trailer to the front camera for driver assistance systems R242. The control unit J345 can also detect whether the electrically connected trailer is actually a trailer or, for example, a bicycle rack. Given that trailer-specific speed limits are not relevant to a bicycle rack, they are not displayed in this case.Driver assistTraffic signsAutomatic trailer recognition Trailer: highest speedSetting "Automatic trailer recognition" for the display of trailer-specific traffic signs635_045Option for setting the maximum speed of a trailerThe maximum speed of a trailer can be set manually in a further menu item. A maximum speed of between 60 kph and 130 kph can be set using a virtual knob. This manually set maximum speed is only displayed if a trailer is detected. If the camera recognises a traffic sign with a lower speed limit for vehicles towing a trailer, this is displayed.Traffic signsTrailer: highest speedoffOption for setting the maximum speed when towing a trailer635_04633 BackForwards Ξ ContentsTest your knowledgeAll of the following questions may have one or more correct answer.Question 1: Which new parking scenarios are supported by the third-generation park assist system?a) Autonomous parking manoeuvre in which the driver can exit the car beforehand. The driver need only push a button on the car key, and the car parks automatically. b) Forward parking into a perpendicular parking space c) Reversing out of a perpendicular parking space d) Navigation data based parking manoeuvres in longitudinal and perpendicular parking spacesQuestion 2: a) b) c) d) Which improvements were introduced with the third-generation park assist system? Improved vehicle position recognition through the evaluation of all wheel sensors Display of park assist graphics in the MMI display Use of the front camera for improved environment recognition Use of the optional all-wheel steering during the parking maneouvreQuestion 3: a) b) c) d) For which assistance systems are the two radar sensors in the rear bumper used? Audi lane assist Exit warning Rear cross traffic assist Audi side assistQuestion 4: a) b) c) d) What are the new features of the second generation of the camera based traffic sign recognition system? A driver warning can be generated when speed limits are exceeded. The system was launched in other European markets and in North America. Shortly before crossing a stop sign, a brake jerk is initiated. The speed limits of the traffic sign recognition system can be used by ACC as control variables.Question 5: a) b) c) d) Which traffic signs are displayed by the camera based traffic sign recognition system in the instrument cluster? Speed limits Stop signs Place name signs No overtaking signs34Solutions: 1) b; 2) abd; 3) bcd; 4) abd; 5) ad BackForwards Ξ ContentsSelf study programmesFor further information, i.e. information supplementary to this self study programme, please refer to the following self study programmes:SSP 632 Audi Q7 (type 4M)Order number: A15.5S01.16.20SSP 633 Audi Q7 (type 4M) ChassisOrder number: A15.5S01.18.20SSP 634 Audi Q7 (type 4M) Onboard power supply and networkingOrder number: A15.5S01.19.20SSP 636 Audi Q7 (type 4M) Trailer assistOrder number: A15.5S01.21.2035All rights reserved. Technical specifications are subject to change. Copyright AUDI AG I/VK-35 service.training@audi.de AUDI AG D-85045 Ingolstadt Technical status 02/15 Printed in Germany A15.5S01.20.20635Audi Vorsprung durch Technik