TECHNICAL DOCUMENTATION
SSP 636 Audi Q7 (type 4M) Trailer assist

This PDF is currently unavailable.
Read document text
Self Study Programme 636 For internal use onlyAudi Q7 (type 4M) Trailer assistAudi Service Training BackForwards Ξ ContentsThe new Audi Q7 - sportiness, efficiency, premium comfortProf. Dr. Ulrich Hackenberg, Audi Board Member for Technical Development said: "The new Audi Q7 is a statement of our competence: Weighing 325 kilogrammes less, it sets the benchmark in its class. It is around 26 % more efficient and is equipped with the latest assistance systems, infotainment modules and connect features." With a kerb weight of just 1,995 kilogrammes (as 3.0 TDI), the new Audi Q7 is the lightest in its class. It weighs 325 kilogrammes less than the previous model. With its lightweight, multimaterial body and an all-new chassis, it is comfortable while at the same time offering the typical performance of a sporty Audi – and that with top-notch 2 values. Audi engineers have reduced the fuel consumption of the Q7 by as much as 28 % (TFSI) and 23 % (TDI). The engines set the standard in the segment of large SUVs with all-wheel drive. The 3.0 TDI developing 200 kW (272 hp) and the 3.0 TFSI developing 245 kW (333 hp) accelerate the new Audi Q7 from 0 to 100 kph in 6.1 seconds (TFSI) and 6.3 seconds (TDI), respectively. The diesel V6 consumes on average just 5.7 l of fuel per 100 kilometers, corresponding to 149 g of CO2 per km. The Audi Q7 also sets standards with respect to the operating concept, infotainment, connectivity and driver assistance systems. The second-generation modular infotainment platform is on board, as is the Audi virtual cockpit. The new MMI all‑in‑touch control unit with large touchpad makes operation child’s play. Other attractive innovations include the expanded services from Audi connect, the Audi tablet for the rear seat passengers and the two sound systems with 3D audio. Smartphone integration with Google Android Auto and Apple Carplay is also new. The new Audi Q7 is one of the first cars world-wide to offer these functions. With its range of driver assistance systems, the new Audi Q7 sets standards that go far beyond the standards in its segment. Some systems have been completely redeveloped from scratch. Standard are the rear parking aid, cruise control, adjustable speed limiter, rest recommendation and the safety system Audi pre sense city. It warns the driver of impending collisions with other vehicles or pedestrians and will initiate heavy braking in an emergency.2ContentsIntroduction____________________________________________________________________________________________________________________________________ 4Function of trailer assist_ _______________________________________________________________________________________________________ 5Activating and deactivating the system______________________________________________________________________ 8System displays in the MMI________________________________________________________________________________________________ 10Hardware__________________________________________________________________________________________________________________________________________ 11Diagnostics_____________________________________________________________________________________________________________________________________ 14Trailer programming routine______________________________________________________________________________________________ 16System messages in the instrument cluster and MMI display_ _________________ 18Networking diagram________________________________________________________________________________________________________________ 20Test your knowledge________________________________________________________________________________________________________________ 22The Self Study Programme teaches a basic understanding of the design and mode of operation of new models, new automotive components or new technologies. It is not a Repair Manual! Figures are given for explanatory purposes only and refer to the data valid at the time of preparation of the SSP. This content is not updated. For further information on maintenance and repair work, always refer to the current technical literature.!NoteReference3 BackForwards Ξ ContentsIntroductionDriver assistance systems have made a major breakthrough in the last 10 years. More and more driver assistance systems are available to customers across the entire model range. They assist the driver in difficult situations and thereby enhance driving safety and comfort. The difficult situations also include reversing with a trailer. For this reason, Audi has developed a new assistance system which greatly simplifies reversing with a trailer: trailer assist. The simplification lies in the fact that the system takes over the steering when reversing and thereby allows the vehicle and trailer to be driven in the direction set by the driver. The Audi Q7 is the first Audi model in which trailer assist is offered.Reversing with a trailer without assistance systemThe reversing of vehicles with a trailer is a major challenge for many drivers. This not only goes for drivers who have little or no experience in reversing with a trailer. Different local conditions, limited visibility when reversing and the use of different trailers with different handling characteristics continually pose new challenges for drivers. Without the help of an assistance system, the trailer becomes unstable and its alignment constantly has to be corrected. The necessary steering direction is anything but intuitive. Steering errors can quickly result in property damage.636_0014 BackForwards Ξ ContentsFunction of trailer assistWhen reversing a vehicle with trailer, the driver may take his hands off the steering wheel if trailer assist has been activated. The requisite steering inputs are performed by trailer assist, as is already known to be the case with Audi park assist. The driver still controls accelerating and braking. The driver steers the vehicle when driving forwards. If the vehicle is reversed while trailer assist is active, a speed of 8 kph may not be exceeded. If the driver applies too much throttle, the standard speed limiter in the Audi Q7 ensures that the speed threshold is not exceeded and thus prevents early termination of assistance.636_002!Note Trailer assist is an assistance system which helps the driver to reverse with a trailer. The driver does, however, retain full responsibility for moving the vehicle with trailer. In particular, the driver must ensure that no obstacles and hazards are in the way of the vehicle.5 BackForwards Ξ ContentsSetting the direction of travel for reversingThe driver can reverse the vehicle and trailer in a straight line or follow a set course when reversing. As the steering is taken over by the system when trailer assist is active, the driver must be given another option for defining the direction of travel of the vehicle and trailer. The driver sets the desired alignment of the trailer sets for reversing using the turn-push button. The entire vehicle and trailer combination is thus steered using the turn-push button of the MMI operating unit.636_003A display on the MMI monitor visualises the current setting. The driver sets an angle to be realised between the longitudinal axis of the vehicle and trailer. This angle is referred to as the articulation angle. Trailer assist now controls the vehicle and trailer via the steering system, whichrealises the defined articulation angle. A defined articulation angle corresponds to a specific curve radius. The defined articulation angle can be continuously adjusted while reversing and thereby adapt the course or destination of the vehicle and trailer.Articulation angle β: angle between the longitudinal axis of the vehicle and trailer636_0046 BackForwards Ξ ContentsAfter cornering, straighten the towing mechanismIf the trailer travels in the desired direction, it is sufficient to push the turn-push button in order to straighten the towing mechanism and then to continue reversing. The defined articulation angle is reset to zero degrees by pushing the turn-push button.636_005If the vehicle has optional all-wheel steering, this is also utilised by trailer assist. All-wheel steering significantly improves the mobilityof the vehicle and trailer and reduces the amount of space required for reversing.!Note As long as the vehicle and trailer are reversing, it is not possible to toggle to other display content on the MMI monitor. The operating elements of the MMI operating unit are not functional during this period.7 BackForwards Ξ ContentsActivating and deactivating the systemActivating the systemTrailer assist is activated by pushing the same button used to activate park assist. The symbol on this button remains unchanged. A requirement for activating trailer assist is that the vehicle is stationary or is not travelling forwards faster than 10 kph. In addition, the trailer assist control unit J345 must detect that a trailer is coupled to the vehicle. If the system does not detect a trailer coupled to the vehicle when the button is pushed, park assist is activated provided that the vehicle has this option.Deactivation of the system by the driverThe driver can only deactivate trailer assist when the vehicle and trailer are stationary. The system can be deactivated by pressing either of the following two buttons:• Audi parking system button E581• Park assist button E266Audi parking system button E581 Park assist button E266636_0068 BackForwards Ξ ContentsAutomatic deactivation of the systemIf active, trailer assist self-deactivates automatically if one of the following events occurs:1. 2. 3. 4. Vehicle travelling forwards at greater than 15 kph Deactivation of the ESC system6. If the articulation angle exceeds the allowable articulation angle range. If a malfunction or a fault occurs in the electrical components of the trailer system.7. Active intervention by the ESC system The driver takes the steering wheel during steering movements of the trailer assist system. If, after selecting reverse, the reversing manoeuvre is started before the text message "Trailer assist: steernig assistance active" appears in the MMI display.5. If trailer assist self-deactivates due to one of events described above (events 2 to 7), trailer assist also initiates protective braking to bring the vehicle and trailer to a stop.Automatic reactivation of the systemIf trailer assist is deactivated while travelling forwards because the 10 kph speed threshold is exceeded and the vehicle and trailer are subsequently brought to a stop, the system is automatically reactivated as soon as reverse is selected. However, this is only the case if the 20 kph speed threshold has not been exceeded in the interim while travelling forwards.!Note The speeds and speed thresholds specified in this self study programme are parameters in the trailer assist software. There is a possibility that these values may be revised after completion of the self study programme.9 BackForwards Ξ ContentsSystem displays in the MMIDisplay in graphic modeAfter activating the system, the trailer assist screen appears in the MMI display. The following screen shows the display in the so-called graphic mode. Alternatively, the dynamic variables of trailer assist are also represented on the rear view camera monitor. The four dynamic variables of trailer assist are labelled in the figure and are explained below the figure.The nominal articulation angle set by the driver Maximum articulation angle setting range Actual articulation angle Markings of the articulation angle comfort rangeLook! Safe to move?636_007The actual articulation angleAfter programming has been successfully completed, the actual articulation angle is calculated from the data supplied by the articulation angle sensor G820. A detailed description of the articulation angle sensor G820 and the programming routine can be found later in this self study programme.The articulation angle setting rangeThe maximum articulation angle setting range is calculated by trailer assist during the programming routine. The maximum setting range depends on the length of the trailer drawbar, which is also determined during the programming routine. A short drawbar will have smaller setting range, while a long drawbar will have a larger setting range.The nominal articulation angle set by the driverThe driver provides trailer assist with an articulation angle for the system to set via the steering. The driver sets the articulation angle using the turn-push button on the MMI.The comfort rangeIf the articulation angle is within the comfort range, the vehicle and trailer can be straightened without changing the alignment of the trailer.Display in rear view camera modeThe information supplied by trailer assist can also be projected onto the rear view camera monitor. If the vehicle is equipped with a rear view camera, the driver has the option of selecting between the graphic and rear view camera mode displays.Markings of the articulation angle comfort range Maximum articulation angle setting range Actual articulation angle The nominal articulation angle set by the driver636_00810 BackForwards Ξ ContentsHardwareArticulation angle sensor G820The central sensor of trailer assist is the articulation angle sensor G820. This sensor is integrated in the ball joint of the electric swivelling tow bar. The installation of an articulation angle sensor is recognisable by the black plastic ring which is seated in a milled slot in the ball joint. The plastic ring is mounted rotatably in the slot. When towing a trailer, the trailer drawbar is frictionally connected to the plastic ring. Each movement of the trailer relative to the vehicle causes the plastic ring to rotate. Rotation of the plastic ring is registered by the articulation angle sensor G820 and transmitted to the trailer assist control unit. The trailer assist master control unit is the onboard power supply control unit J519.Articulation angle sensor G820 Plastic ring636_009When fitted, the black plastic ring is frictionally connected to a magnetic ring. If the plastic ring is fitted onto the magnetic ring, this is also referred to as an encoder ring. The plastic and magneticrings can be ordered from parts dealers and can be replaced with a minimum of effort.To allow both rings to be replaced, the following measures were taken: • The plastic ring is not a closed ring, but rather is broken in one place. • The magnetic ring is not as closed ring either; it can be folded up in the form of two half-rings. When the magnetic ring is closed, the two half rings interlock.Plastic ring636_010Magnetic ring636_01111 BackIn total, 16 permanent magnets are arranged in a circular configuration in the magnetic ring. The north and south poles of adjacent magnets are rotated through 180 degrees to produce a magnetic line diagram as shown in Fig. 636_012. The magnetic field penetrates the Hall-effect sensor and impinges on the Hall-effect sensor PCB with integrated articulation angle sensor G820. If the magnetic field changes due to rotation of the encoderForwards Ξ Contentsring, the Hall-effect voltage of the sensor changes accordingly. The Hall-effect voltage is continuously registered by the electronic unit of the articulation angle sensor and the rotation of the encoder ring is determined from the changes in Hall-effect voltage. On the basis of this information, trailer assist is able to compute the absolute articulation angle β after completion of the programming routine.Magnetic field lines Plastic ring Magnet with north pole and south pole636_012Articulation angle sensor G820 with connecting cables636_013Hall-effect sensor PCB Hall sensorThe following cutaway view serves to visualise the overall design and the interaction between the individual components:Plastic ring Articulation angle sensor G820 Cables leading to trailer control unit J345 Magnetic ring636_01412 BackForwards Ξ ContentsNetworking of the three master control units of trailer assistThe measurement data of the Hall sensor is continuously transferred from the articulated angle sensor G820 to the trailer recognition control unit J345 via LIN bus. The measurement data corresponds to the relative articulated angle. The control unit J345 then places these values on the convenience CAN bus for the onboard power supply control unit J519. The onboard power supply control unit calculates the current absolute angle β from these values.Articulation angle sensor for tow bar G820Hall sensorConvenience CANLIN busTrailer recognition control unit J345 J345Diagnostics Articulation angle sensorOnboard power supply control unit J519Function Trailer assist636_015Cable connections between the articulation angle sensor and the control unit J345In total, three cables lead from the articulation angle sensor G820 to the trailer recognition control unit J345: • 1 LIN bus line • 1 power supply line • 1 ground line The articulation angle sensor G820 is supplied with battery voltage by the trailer recognition control unit J345 via the power supply cable. This cable only carries voltage if the control unit J345 has detected a trailer coupled to the vehicle.Trailer recognition control unit J345 J345LIN busArticulation angle sensor for tow bar G820Power supply cable Ground cable636_01613 BackForwards Ξ ContentsTrailer control unit J345The trailer control unit J345 performs the following tasks on behalf of trailer assist: 1. 2. It is the LIN master of articulation angle sensor G820. It monitors whether a trailer is electrically connected to the vehicle or has been disconnected from the vehicle. If a trailer is disconnected from the vehicle and then reconnected to the vehicle, the trailer programming routine must be restarted before setting off on the next trip. This may possibly be a different trailer with different characteristics. It enters a detected fault into the fault memory at the request of the articulation angle sensor. Other tasks of the trailer recognition control unit J345 are: 1. 2. 3. Reading in the button for electric swivelling tow bar E474. Activating the towing bracket lowering motor V452. Controlling the lights in the trailer via the socket for trailer operation U10.3. Trailer control unit J345636_018Installation of trailer control unit J345636_017DiagnosticsDiagnostic operations in the trailer control unit J345The articulation angle sensor G820 is a control unit with selfdiagnostic capability. As a LIN bus user, however, it does not have its own fault memory. Faults in the articulation angle sensor G820 are transmitted to the trailer control unit J345 via LIN bus and registered here in the fault memory.The following fault memory entries are possible: • Articulation angle sensor - implausible message • Articulation angle sensor - sensor faulty • Articulation angle sensor - encoder ring faulty • Articulation angle sensor - mechanical fault • Articulation angle sensor - no signal / communication • Articulation angle sensor - voltage too low • Articulation angle sensor - voltage too high • Articulation angle sensor - short circuit to ground in supply voltage circuitThe following measurement data is utilised in the trailer control unit J345: • Articulation angle (relative articulation value) • Articulation angle speedCoding for installation of an articulation angle sensor: • The coding of the trailer recognition control unit J345 includes a coding bit for installation of an articulation angle sensor.14 BackForwards Ξ ContentsDiagnostic operations in the onboard power supply control unit J519Measurement value Vehicle data Vehicle speed Reverse gear selected yes / no Yaw rate of vehicle 16 bit 1 bit 16 bit kph °/s Length of information Physical unitSteering data Sign for actual value for steering rack position - front steering + / Actual value for steering rack position - front steering Sign for nominal value for steering rack position - front steering + / Nominal value for steering rack position - front steering Sign for actual value for rear wheel angle + / Actual value for rear wheel angle Sign for nominal value for rear wheel angle + / Nominal value for rear wheel angle 1 bit 16 bit 1 bit 16 bit 1 bit 16 bit 1 bit 16 bit mm mm mm SDgr SDgrArticulation angle data of the trailer Raw value for articulation angle (corresponds to relative articulation angle value) Articulation angle speed Absolute articulation angle Nominal value for absolute articulation angle Maximum absolute articulation angle Maximum previously utilised absolute articulation angle 16 bit 16 bit 16 bit 8 bit 8 bit 8 bit SDgr °/s SDgr SDgr SDgr SDgrTrailer information Trailer electrically connected to vehicle / not connected Drawbar length currently used in software Rear carrier detected / not detected 1 bit 16 bit 1 bit cm -Stored values Previous relative articulation angle value before turning off ignition Previous absolute articulation angle value before turning off ignition Previously used value for drawbar length before turning off ignition Change of trailer detected yes / no Emergency braking initiated yes / no Was the speed limiter active yes / no Trailer assist software version 16 bit 16 bit 16 bit 1 bit 1 bit 1 bit 32 bit SDgr SDgr cm -15 BackForwards Ξ ContentsTrailer programming routineTo allow the use of trailer assist after coupling a trailer, trailer assist must first determine two trailer characteristics. This process is referred to as programming. Programming can be performed both when driving forwards and when reversing. A trailer is always programmed within the first metres after coupling the trailer. For this purpose, the vehicle must be driven a short distance straight ahead and negotiate a corner. If the driver first drives forwards after coupling a trailer, programming will take place in the background and the driver will not notice anything. Even if the same trailer is used, the programming routine must be repeated whenever the trailer is recoupled. The reason for this is that it is not possible to identify the trailer or the absolute articulation angle β is not known when the trailer is recoupled. If the trailer is not electrically disconnected from the vehicle in between two trips, then it must be reprogrammed before setting off on the next trip. The trailer control unit J345 detects when a trailer has been disconnected electrically from the vehicle, even when the ignition is off. This applies only to trailers which are illuminated by bulbs and not by LEDs.The following values are determined during the programming routine: • The absolute articulation angle β • The drawbar length ID of the trailer636_019636_020Both values are initially unknown after coupling a trailer. The values are however determined by trailer assist after driving just a few metres by utilising corresponding software algorithms and the data from the articulation angle sensor. The articulation angle sensor G820 supplies relative articulation angle values, which trailer assist uses to compute the absolute articulation angle β on completion of programming. At an absolute articulation angle β of zero degrees, the vehicle and trailer are in a straight line. The relative articulation angle changes as soon as the magnetic ring begins to rotate. If the magnetic ring does not rotate, the relative articulation angle remains constant. From the changes inrelative articulation angle, trailer assist can compute the rotation of the magnetic ring in degrees and thereby how much the absolute articulation angle β has changed. The relative articulation angle is tracked as a measured value in the trailer control unit J345 and in the onboard power supply control unit J519. The value for absolute articulation angle β and the calculated drawbar length ID, are available as measurement data in the onboard power supply control unit J519.!16Note When a trailer is connected to the vehicle, the position of the rotatable plastic ring in the tow bar is unknown. This is why relative articulation angle values are used initially and then converted to an absolute articulation angle β by trailer assist. The relative articulation angle values are based on the Hall-effect voltage measured by the Hall-effect sensor. If the magnetic ring is rotated through 360 degrees, the Hall-effect voltage will have eight maxima and eight minima. The reason for this is that the north pole and the south pole of a permanent magnet each pass the Hall-effect sensor eight times (refer to Fig. 636_012 on page 12). If the voltage curve is plotted with an oscillocope, this curve would exhibit eight sine-wave oscillations. BackForwards Ξ ContentsProgramming routine when reversingIf the driver reverses straight after coupling a trailer with trailer assist activated, trailer assist is not initially able to operate at full capacity because it does not yet know the absolute articulation angle β or the drawbar length ID.In this situation, trailer assist behaves as follows: 1. It initially stabilises the vehicle and trailer at the articulation angle registered on activation of trailer assist. After the vehicle and trailer have been successfully stabilised, trailer assist is available with limited capacity. Neither the momentary articulation angle nor the articulation angle input by the driver are represented as lines in the display, but rather as circular segments due to the inaccuracy which still exists during the programming routine. 3. The circular segments become increasingly narrower as programming progresses. They eventually form a line when programming is completed, the absolute articulation angle β and drawbar length ID are known and full system capacity is available.2. During the programming routine, the driver is requested to drive carefully by the following text message: "Trailer assist: drive carefully and operate brakes yourself to initialise trailer".Range within which the nominal articulation angle fallsLook! Safe to move?636_021Range within which the actual articulation angle falls!Note During the programming routine, trailer assist can also determine whether a trailer or a rear carrier is connected electrically to the vehicle. If the system assumes that a rear carrier is fitted, it cannot be activated or it self-deactivates again.17 BackForwards Ξ ContentsSystem messages in the instrument cluster and MMI displayText in instrument cluster display No display in instrument cluster Text in MMI display "Trailer assist: steering assistance active. Speed is limited. Please operate brakes yourself. "Trailer assist: currently unavailable. "Trailer assist: ended. "Trailer assist: cancelled. Vehicle has been braked. Steering input from driver. Please take over steering! "Trailer assist: cancelled. Vehicle has been braked. Please take over steering! "Trailer assist: Vehicle has been braked. Straighten towing mechanism by driving forwards. "Trailer assist: Fault! Vehicle has been braked. Continue steering vehicle! Please contact workshop! "Trailer assist: Fault! Please contact workshop! Display on MMI screen Description This message is displayed if trailer assist is activated. The text also refers to the speed limiter."Trailer assist: currently unavailable. "Trailer assist: ended. "Trailer assist: cancelled. Vehicle has been braked. Steering input from driver. Please take over steering! "Trailer assist: cancelled. Vehicle has been braked. Please take over steering! "Trailer assist: Vehicle has been braked. Straighten towing mechanism by driving forwards. "Trailer assist: Fault! Vehicle has been braked. Continue steering vehicle! Please contact workshop! "Trailer assist: Fault! Please contact workshop! To release the parking brake, please press the foot brake. No display in instrument clusterThis message is displayed if trailer assist currently cannot be activated. This message is displayed if trailer assist has ended. Trailer assistance ends because the driver has taken the steering wheel. The vehicle has been braked.Trailer assistance ends because ESC has intervened with corrective action or ESC has been switched off. The vehicle has been braked. Trailer assist has not ended! The vehicle has been braked due to the danger of the trailer over-articulating and damaging the vehicle. End of trailer assistance due to detected fault. (appears only when R is selected.)End of trailer assistance due to detected fault. (appears only when N or D is selected.) This display appears after trailer assist has initiated emergency braking. This message is displayed if the trailer programming routine has not yet been completed. This message is displayed if trailer assist has detected a rear carrier on the vehicle. Trailer assistance ends because trailer programming was not successful. This display only appears when R is selected."Trailer assist: drive carefully and operate brakes yourself to initialise trailer. "Trailer assist: not available when using a rear carrier. "Trailer assist: cancelled. Vehicle has been braked. No trailer detected. Please take over steering!"Trailer assist: not available when using a rear carrier. "Trailer assist: cancelled. Vehicle has been braked. No trailer detected. Please take over steering!18 BackForwards Ξ ContentsText in instrument cluster display "Trailer assist: cancelled. No trailer detected.Text in MMI display "Trailer assist: cancelled. No trailer detected.Description Trailer assistance ends if no trailer is detected (only in vehicles without park assist) of if trailer programming was not successful. This display appears only when N or D is selected. This message is displayed if trailer assist has detected a rear carrier on the vehicle."Trailer assist: cancelled. No trailer detected. Please take over steering! No display in instrument cluster"Trailer assist: cancelled. No trailer detected. Please take over steering! "Trailer assist: please stop vehicle to switch on.This message is displayed if the activation button was pressed with the gear selector in R. Trailer assist can only be activated when travelling forwards and when at a standstill. This message is displayed if R was selected too quickly after activating trailer assist. This message is displayed when reversing if it is currently not possible to initiate protective braking."Trailer assist: Vehicle has been braked. Not stopped long enough. "Trailer assist: Fault! Please brake immediately and take over steering. No display in instrument cluster"Trailer assist: Vehicle has been braked. Not stopped long enough. "Trailer assist: Fault! Please brake immediately and take over steering. "Trailer assist: available. Please press park assist button to activate.This message is displayed if a trailer has been detected and trailer assist has not been activated with the selector in R (displayed only once per maneouvring cycle.) This message is displayed if ESC was switched off while trailer assist was active. Protective braking is then initiated.No display in instrument cluster"Trailer assist: cancelled. Vehicle has been braked. Stability Control (ESC) off. Please take over steering!19 BackForwards Ξ ContentsNetworking diagramThe networking diagram shows all control units integrated in the trailer assist system, in addition to all bus systems used by the control units to interchange information.Rear steering control unit J1019MMI display J685Power steering control unit J500MMI operating unit E380ABS control unit J104 MIB CAN FlexRay Control unit in dash panel insert J285 Information electronics control unit 1 J794 MOST bus Data bus diagnostic interface J533 Infotainment CAN bus Extended CAN Surround view camera control unit J928 Rear view camera system control unit J772 Onboard power supply control unit J519 Trailer manoeuvring assist LIN bus Operating unit 1 for drive and comfort/ convenience functions E791 Park assist Trailer recognition control unit J345 LIN bus Articulation angle sensor for tow bar G820Engine control unit J623Convenience CAN636_02220 BackForwards Ξ ContentsControl units and their tasks in implementing the trailer assist functionThe onboard power supply control unit J519 ... • is the trailer assist master control unit. • coordinates all functions of trailer assist. • calculates the required steering inputs when trailer assist is active and transmits this information to the power steering control unit J500 and the rear steering control unit J1019. • brakes the vehicle if it is necessary to end assistance while trailer assist is active and while reversing. • calculates the absolute articulation angle β from the transmitted relative articulation angle value. • calculates the absolute articulation angle β and the drawbar length ID of the trailer during the programming routine. • makes measurement data from trailer assist available for diagnostic purposes. The MMI display J685 ... • displays graphics or images of trailer assist at the demand of the onboard power supply control unit J519.The control unit in dash panel insert J285 ... • shows messages of trailer assist in the instrument cluster display at the demand of the onboard power supply control unit J519.The towbar articulation angle sensor G820 ... • measures the actual magnetic field strength of the magnetic ring using a Hall-effect sensor and transmits this measurement data as relative articulation angle values to the trailer control unit J345. • computes the articulation angle speed from the changes in the relative articulation angle values and transmits this data to the trailer control unit J345. • performs cyclical function checks and indicates any faults its detects to the trailer control unit J345.The rear view camera control unit J772 ... • receives the actual articulation angle information via CAN bus. • displays actual articulation angle information on the rear view camera monitor. • transmits the rear view camera image to the information electronics control unit 1 – J794 for display on the MMI monitor.The surround view camera control unit J928 ... • receives actual articulation angle information via CAN bus. • displays the actual articulation angle information in the camera image of the area behind the vehicle. • transmits the camera image to the information electronics control unit 1 – J794 for display on the MMI monitor.The trailer recognition control unit J345 ... • receives the relative articulation angle value and the articulation angle speed from the articulation angle sensor G820 and places this information on the convenience CAN bus for the onboard power supply control unit J519. • monitors whether or not a trailer is electrically connected to the vehicle. • represents the diagnostic interface for the articulation angle sensor G820 as this does not have its own address word or own fault memory.The power steering control unit J500 ... • activates the electromechanical power steering motor V187 in accordance with the requirements of trailer assist.The rear steering control unit J1019 ... • activates the rear steering motor in accordance with the requirements of trailer assist.The operating unit 1 for drive and comfort/convenience functions E791 ... • indicates to the onboard power supply control unit J519 when the Audi parking system button E581 or the park assist button E266 has been pressed via LIN bus.The ABS control unit J104 ... • initiates protective braking if it is necessary to end trailer assistance while trailer assist is active and while reversing. • keeps the parking brake applied after protective braking until the parking brake is released manually.The information electronics control unit 1 - J794 ... • stores the basic trailer assist graphic and transmits this when required together with the current articulation angle values to the MMI display. • transmits the images captured by the rear view camera or the surround view camera to the MMI display.The engine control unit J623 ... • limits the reversing speed to defined maximum values via the speed limiter while trailer assist is active.The databus diagnostic interface J533 ... • implements information exchange between control units which are connected to different bus systems.The MMI operating unit E380 ... • registers the turning and pushing of the turn-push button and places the information on the CAN bus.21 BackForwards Ξ ContentsTest your knowledgeAll of the following questions may have one or more correct answer.Question 1: a) b) c) d) In which control unit is the trailer assist software integrated? In the trailer assist control unit J345 In the convenience system central control unit J393 In the onboard power supply control unit J519 In the trailer assist control unit J1082Question 2: a) b) c) d) What are the functions of trailer assist when it is active? Coupling the trailer to the vehicle Applying throttle when reversing Initiation of protective braking when reversing if necessary Steering while reversingQuestion 3: a) b) c) d) Which variables does trailer assist define during the programming routine? Trailer length and width Drawbar length of trailer The articulation angle between the longitudinal axis of the vehicle and trailer The weight of the trailerQuestion 4: a) b) c) d) Which sensors does trailer assist use to define the angle between the longitudinal axis of the vehicle and trailer? Articulation angle sensor G820 Reversing camera Ultrasound sensors of park assist Yaw rate sensor of the ESC systemQuestion 5: a) b) c) d) How is trailer assist activated? Using the trailer assist button E778 Using the Audi parking system button E581 In the trailer assist submenu of the driver assistance systems menu Trailer assist is active whenever a trailer is detected by the trailer assist control unit J345.Question 6: a) b) c) d) When is the active trailer assist system deactivated? When the driver takes the steering wheel If the reversing manoeuvre has not been completed within 180 seconds If the rear view camera has detected obstacles behind the vehicle and trailer. If the vehicle is travelling forwards faster than 10 kph.22Solutions: 1) c; 2) cd; 3) bc; 4) a; 5) b; 6) ad BackForwards Ξ ContentsSelf study programmesFor further information, i.e. information supplementary to this self study programme, please refer to the following self study programmes:SSP 632 Audi Q7 (type 4M)Order number: A15.5S01.16.20SSP 633 Audi Q7 (type 4M) ChassisOrder number: A15.5S01.18.20SSP 634 Audi Q7 (type 4M) Onboard power supply and networkingOrder number: A15.5S01.19.20SSP 635 Audi Q7 (type 4M) Driver assistance systemsOrder number: A15.5S01.20.2023All rights reserved. Technical specifications are subject to change. Copyright AUDI AG I/VK-35 service.training@audi.de AUDI AG D-85045 Ingolstadt Technical status 02/15 Printed in Germany A15.5S01.21.20636Audi Vorsprung durch Technik