TECHNICAL DOCUMENTATION
SSP 654 Audi Q2 (type GA)

This PDF is currently unavailable.
Read document text
Audi Q2(type GA)Self Study Programme 654For internal use only.Audi Service Training BackAudi is entering into a new market segment. With the Audi Q2 Audi is introducing an SUV that rounds out the Q family downward in size. At a length of 4.19 metres, it combines a youthful design with a high level of functionality and plenty of driving fun. Connectivity, infotainment and assistance systems come from the luxury class. The compact SUV is built at the main Audi plant in Ingolstadt, and it will launch on the European market in autumn 2016. The Audi Q2 presents a powerful and energetic image at first glance. Two large, powerfully contoured air inlets and the highly positioned Singleframe radiator grille clearly give the front end an SUV look. In a side view, edges and polygons accentuate the vehicle’s lines in a design language that is new at Audi.Forward Ξ ContentsA special feature is the color-offset blade on the low-profile C-post that can be customised. Above the high shoulder line are the narrow windows which make up around one-third of the surface area relative to the metal surfaces. The flanks are drawn inward in the door area. They emphasise the wheels and with them the quattro character of the compact SUV. At the rear, a long roof spoiler, the strong curvature of the bumper and the diffuser in underbody-protection look create a dynamic finish. On the left side the exhaust system terminates in single or twin tailpipes. Just like the wedge-shaped headlights, the rear lights can also be implemented in LED technology as an option. Audi can also supply dynamic turn signals at the rear.654_002 2ContentsIntroductionPresentation __________________________________________________________________________________________________________________________________________________ 4BodyIntroduction __________________________________________________________________________________________________________________________________________________ 8 Design and customisation _ _________________________________________________________________________________________________________________________________ 12Drive unitsPetrol engines _______________________________________________________________________________________________________________________________________________ 16 Diesel engines _______________________________________________________________________________________________________________________________________________ 19 Engine/gearbox combinations _____________________________________________________________________________________________________________________________ 22Power transmissionOverview _____________________________________________________________________________________________________________________________________________________ 24 7-speed dual-clutch gearbox 0GC _________________________________________________________________________________________________________________________ 26SuspensionOverall concept ______________________________________________________________________________________________________________________________________________ 32 Axles and wheel alignment ________________________________________________________________________________________________________________________________ 33 Dynamic Chassis Control (DCC) ____________________________________________________________________________________________________________________________ 34 Brake system ________________________________________________________________________________________________________________________________________________ 35 Steering system _____________________________________________________________________________________________________________________________________________ 36 adaptive cruise control (ACC) ______________________________________________________________________________________________________________________________ 36 Wheels and tyres ____________________________________________________________________________________________________________________________________________ 39Electrics and electronicsPower supply ________________________________________________________________________________________________________________________________________________ 40 Installation locations of the control units ________________________________________________________________________________________________________________ 42 Topology _____________________________________________________________________________________________________________________________________________________ 44 Control unit profiles ________________________________________________________________________________________________________________________________________ 47 Exterior lighting _____________________________________________________________________________________________________________________________________________ 54 Audi drive select _ ____________________________________________________________________________________________________________________________________________ 62 Combiner head-up display _ ________________________________________________________________________________________________________________________________ 64 Electrical rear lid drive ______________________________________________________________________________________________________________________________________ 67Air conditioningOverview _____________________________________________________________________________________________________________________________________________________ 68 Dust and pollen filter _______________________________________________________________________________________________________________________________________ 68Safety and driver assistance systemsPassive safety ________________________________________________________________________________________________________________________________________________ 70 Active safety _________________________________________________________________________________________________________________________________________________ 74 Front camera for driver assistance systems R242 _______________________________________________________________________________________________________ 86 Audi active lane assist (AALA) _ ____________________________________________________________________________________________________________________________ 87 Emergency assist ____________________________________________________________________________________________________________________________________________ 90Infotainment and Audi connectIntroduction _________________________________________________________________________________________________________________________________________________ 94 Control panel ________________________________________________________________________________________________________________________________________________ 96 Sound systems ______________________________________________________________________________________________________________________________________________ 98 Aerials ______________________________________________________________________________________________________________________________________________________ 102Inspection and maintenanceOverview ___________________________________________________________________________________________________________________________________________________ 104AppendixSelf study programmes _ __________________________________________________________________________________________________________________________________ 106 The self study programme teaches a basic understanding of the design and mode of operation of new models, new automotive components or new technologies. It is not a repair manual! Figures are given for explanatory purposes only and refer to the data valid at the time of preparation of the SSP. This content is not updated. For further information about maintenance and repair work, always refer to the current technical literature. NoteReference3 BackForward Ξ ContentsIntroductionPresentationThe latest addition to Audi's Q range is the Q2 - an urban compact SUV for everyday driving and leisure with a progressive design and a high level of functionality. It features luxury-class connectivity, infotainment and assistance systems.Engines• 1.0l R3 TFSI engine (85 kW) • 1.4l R4 TFSI engine (110 kW) • 2.0l R4 TFSI engine (140 kW) • 1.6l R4 TDI engine (85 kW) • 2.0l R4 TDI engine (105 – 140 kW) Other engine versions will become available at a later date.Driver assistance systemsThe following systems are available: • Audi pre-sense front • Audi pre-sense basic • Emergency assist • adaptive cruise control Stop & Go • Traffic jam assist • Audi side assist • Audi active lane assist • Road sign recognition • control unit • Rear cross traffic assistDisplays and operationThe displays appear on a central MMI monitor which is permanently mounted on the instrument panel. Depending on trim level, the Audi Q7 features a fully digital instrument cluster - the Audi virtual cockpit. A head-up display is optional. The system projects relevant information on to the windscreen within the driver's field of vision in the form of easily recogisable symbols and characters.Air conditioningAir conditioning is provided by a manually or automatically controlled air conditioning system. The air conditioning system is optionally available with a dust and pollen filter which has an anti-allergenic effect. Another new feature of the Audi Q2 is the rain and light detector sensor G397.4 BackForward Ξ ContentsBodyThe body creates the foundation for the vehicle's rigorous lightweight design concept. Form-hardened steels give the passenger cell a strong backbone. A roof slopes gently rearward toward the C-pillar with its contrasting-colour blade. As an option, the vehicle can be equipped with an electric rear lid drive.SuspensionA McPherson strut-type axle is used at the front. quattro models have a multi-link rear axle, while front-wheel-drive models have a torsion beam axle. Adaptive dampers are optional. Progressive electro-mechanical steering (EPS) and the electro-mechanical parking brake (EPB) are standard. For the first time on an Audi model, an ACC system by Continental AG is available as an option. A wide selection of wheels in sizes ranging from 16“ to 18“ offers lots of scope for customisation.654_003Power transmissionIn addition to the well-known six-speed manual gearboxes as well as the 0CW and 0D9 dual-clutch gearboxes, there is the newly developed sevenspeed dual-clutch gearbox 0GC which can be used for both front and allwheel drive. The 0BR rear axle drive with all-wheel-drive clutch or the 0CQ rear axle drive with all-wheel-drive clutch are used for the quattro drive depending on engine version. Both final drives house the 0CQ all-wheel-drive clutch. This is the fifth generation of the electro-hydraulically controlled allwheel-drive clutch.Electrical system and electricsThe electrical system of the Audi Q2 is based on the electrical system architecture of the Modular Transverse Matrix (MQB). There are many similarities with the electrical system architecture of the Audi A3 (type 8V) PA. Special features of this electrical system architecture are: • The battery is to be found in the engine bay on all Audi Q2 models. • There is no FlexRay bus system like in Audi Q2 models. • The MOST150 bus system is used. Two spindle drive units are used in models with electric rear lid drive.5 BackForward Ξ ContentsDimensions15081)9401574 1794654_0461548 2009654_0471029 2)9668282595 4191768654_0486740 BackForward Ξ Contents14163)14443)13904)13474)779 1000654_049Exterior dimensions and weightsLength in mm Width (not including exterior mirrors) in mm Width (including exterior mirrors) in mm Height in mm Front track width in mm Rear track width in mm Wheelbase in mm Kerb weight in kg Gross vehicle weight in kg Drag coefficient cw 4191 1794 2009 15081) 1547 1548 2595 11805) 18405) 0.30Inner dimensions and other specificationsFront cabin width in mm Front headroom in mm Front shoulder width in mm Rear headroom in mm Through-loading width in mm Load sill height in mm Luggage compartment capacity in l Capacity of fuel tank in l 14443) 10292) 13904) 966 1000 740 405/10506), 7) 50A roof aerial increases the height of the vehicle by 30 mm. Maximum headroom. 3) Elbow room width. 4) Shoulder room width. 5) With 1.4l TFSI engine (110 kW). 6) Values for a model with front-wheel drive. 7) With rear seat folded down.1) 2)All dimensions are given in millimetres and refer to the unladen weight of the vehicle.7 BackForward Ξ ContentsBodyIntroductionThe body of the Audi Q2 is based on the Modular Transverse Matrix. Previously used in the Audi A3 (type 8V), this reliable platform has been adapted to meet the specific requirements of the Q2 with a wheelbase of 2595 mm. The weight target for the Q2 of 1250 kg (model with 1.0l TFSI engine) and the exacting demands on vehicle safety were achieved by making systematic use of different material grade and particularly ultra-high-strength parts made of hot-shaped steel. The weight of the body cell (version with solid roof without attachments) is approximately 275 kg.654_041Materials usedKey:Ultra-high-strength hot-shaped steel Advanced high-strength steel High-strength steel Soft steel8 BackForward Ξ ContentsJoining technologyA number of different joining technologies are used to assemble the body of the Q2. In addition to classic resistance spot welding (there are 2440 spot welds on the car), the following technologies are utilised: • MAG welding (total seam length: 1182 mm) • Laser soldering (total seam length: 3102 mm) • Plasmatron soldering (total seam length: 1273 mm) In addition to that, 3681 mm of support adhesive and 31533 mm of structural adhesive are used in every body.654_042 9 BackForward Ξ ContentsUltra-high-strength hot-shaped componentsThe use of ultra-high-strength hot-shaped steel materials means that body repairs can only be accomplished by adopting special repair methods suited to the properties of the material in question. High heat transfer to the surface to be welded would significantly diminish the strength and weaken the structure of the component by altering the microstructure of the material. For this reason, MAG inert gas welding may only be used for sectional repair work on these high-quality steels in isolated cases and in precisely defined areas. The relevant descriptions can be found in the workshop literature.Sectional repairs and replaceable components Following miscellaneous trials and crash tests on the Audi Q2, approval was given for two sectional repair areas where MAG welding is allowed: 1 2 Outer top left /right A post Inside left/right B postThe following ultra high strength hot-shaped components have to be completely replaced if damaged: 3 4 5 6 7 8 9 10 Side member 2, left/right Upper footwell cross-member Lower footwell cross-member Heel section reinforcement Cross-member Rear side member 2, left/right Inside left/right sill beam Tunnel1 76 10 3 49 5654_04310 BackPartial tempering 24 % of the car body is made from hot-stamped steel. Prior to shaping, they are heated to about 1000 °C in a continuous-flow oven and then immediately cooled to about 200 °C in a watercooled pressing tool. This abrupt change in temperature creates an iron-carbon microstructure which imparts exceptional tensile strength. Components made from these high-end steels are relatively thin and therefore light. Components such as the rear side member or the inside B post have to be capable of absorbing and dissipating the forces that occur in the event of a crash and, therefore, are partially hardened and tempered in accordance with requirements. This gives the component high-strength or ultra-high-strength properties within a defined area.Forward Ξ ContentsUltra-high-strengthHigh-strength Ultra-high-strength654_0452 8Tailored Rolled Blank The heel plate (6) has been adapted specifically to meet body strength and crash safety requirements by employing tailor rolled blank technology. These are flexibly rolled blanks, where variations in sheet-metal thickness are produced by controlled opening and closing of the gap between the rollers. These variations in sheet-metal thickness not only save weight but also create defined crumple zones which provide protection in the event side-on impact. The thickness of the sheet-metal at the heel plate varies between 0.95 and 1.70 mm.Key:0.95 mm 1.15 mm 1.25 mm 1.50 mm 1.70 mm654_044 11 BackForward Ξ ContentsDesign and customisationCustomisation is a key purchase reason for young, progressive customers and is made possible by offering trim lines, packages and a variety of options. Audi Original Accessories (AOZ) offers further customisation options for buyers ordering a new car ex-factory or as a commercial retrofit solution. For example, various design decals are available for the Audi Q2 to accentuate its distinctive design features.Blades on the C postsThe C post on the Aud Q2 are trimmed with so-called blades consisting of an outer shell mounted on a carrier part. The blades are precisely positioned relative to the car body by means of centring pins (highlighted red in the illustration) and held in place by adhesive as well as a total of eight fastening clips per side. The blades represent not only a design highlight - they also enhance the aerodynamics of the Audi Q2. The blades on the C posts can also be used for further customisation. They are available in body colour, in a contrasting colour or in other optional colours depending on equipment level. Blades are supplied to Customer Service with a primer coat applied. Fastening and sealing materials are also available separately.Centring pins654_014InteriorThe customer can also custom-design the interior with a choice of eight different decorative inlays in three different materials. For the first time in an Audi, the Audi Q2 features decorative inlays in two different versions, each with different day and night designs.654_015 12654_016 BackForward Ξ ContentsDash panelThe dash panel in split into top and bottom sections according to the layer concept. Depending on equipment level, the Audi Q2 is fitted with different dash panel versions which differ from one another in terms of the following criteria: • Left or right hand drive • Analogue instrument cluster or Audi virtual cockpit • With or without head-up displayMMI display There is a trim around the opening for the MMI display in the centre of the dash panel. The trim comes in two different sizes depending on the width of the MMI display fitted.Upper wrap-around trim for 8.3-inch MMI displaysUpper wraparound trim for 5.8 and 7-inch MMI displaysUpper trim support in the dash panel (identical in all versions)654_017Head-up display If the Audi Q2 is equipped with a head-up display, then this is located in front of the instrument cluster together with the kinematic mechanism. The dash panel is finished at the top by a special trim for the head-up display. When the head-up display is switched off, a guided cover closes the dash panel.Trim for the head-up displayKinematic mechanism for the head-up display654_018Reference For more detailed information about the head-up display, refer to the chapter on "Electrics and electronics" in this self study programme (page 64 ff.).13 BackForward Ξ ContentsSeatsThe Audi Q2 combines the high seating position typical of an SUV and the low seating position of the driver and front passenger characteristic of Audi models – that is to say, the mutual relationship between the seat, foot controls, steering wheel and dash panel. This further underscores the dynamic and sporty character of the Q2. 60/40 split folding rear seats are standard. A three-way, 40:20:40 split folding rear seat is optional in the Q2. An armrest and a cupholder are integrated in the folded-down centre section.60/40 split folding rear seats40/20/40 split folding rear seats654_010654_011Panoramic glass sunroofThe Audi Q2 is optionally available with a panoramic glass sunroof - a single-piece glass panel made of dark-gray tinted unlaminated safety glass with outstanding thermal protection properties. The sliding sunroof frame also has a dark-gray tinted polycarbonate trim which extends forwards to the front windscreen frame and sideways to the side wall frame, making the panoramic glass sunroof appear wider and accentuating the design language of the Audi Q2. The panoramic glass sunroof has an electric drive, while the sliding roof roller blind is operated manually. The two water drainage hoses run from the back of the sliding sunroof frame to the outer rear floor panels via the C post.Water drainage hoses routed through the C posts654_009 14 BackForward Ξ ContentsRear lidThe Audi Q2 can have either a rear lid with manual closing and opening function or a power opening and closing rear lid (optional). Two spindle drives are installed in the Q2 for this purpose. To allow the rear lid to close reliably in all conditions, the articulation of the spindel drive relative to the body had to be modified compared to the gas-filled spring in the manual version. The rear lid itself and the two bottom brackets are identical in both versions. The modified geometry of the upper bracket means that the angle of attack of the spindle drive relative to the body is different.Manual-opening rear lidPower-opening rear lid654_012654_013Gas-filled damperUpper bracketSpindle driveUpper bracketNote If the rear lid is still not fully assembled, it should only be opened by hand as the spindle drive may be damaged irreparably by the upper limit stop if the rear lid is too light. The rear lid inner trim may only be fitted when the open rear lid is at its limit stop.Reference For more detailed information about the automatic rear lid, refer to the chapter on "Electrics and electronics" in this self study programme (page 67 ff.).15 BackForward Ξ ContentsDrive unitsPetrol enginesTorque/power curve of 1.0l TFSI engineEngine with code CHZJ Power output in kW Torque in NmEngine speed [rpm]654_070Features Engine code Type Displacement in cm Stroke in mm Bore in mm Number of valves per cylinder Compression ratio Power output in kW at rpm Torque in Nm at rpm Fuel type Turbocharging Exhaust gas treatment Emission standard3Specifications CHZJ 3-cylinder inline engine 999 76.4 74.5 4 10.5 : 1 85 at 5000 – 5500 200 at 2000 - 3500 Premium unleaded 95 RON Exhaust turbocharger 3-way catalytic converter EU 6Reference For more detailed information about the 1.0l TFSI engine, refer to Self Study Programme 639, "Audi 1.0l 3-cylinder TFSI engine of the EA211 series".16 BackForward Ξ ContentsTorque/power curve of 1.4l TFSI engineEngine with code CZEA Power output in kW Torque in NmEngine speed [rpm]654_071Features Engine code Type Displacement in cm Stroke in mm Bore in mm Number of valves per cylinder Compression ratio Power output in kW at rpm Torque in Nm at rpm Fuel type Turbocharging Exhaust gas treatment Emission standard3Specifications CZEA 4-cylinder inline engine 1395 80.0 74.5 4 10.5 : 1 110 at 5000 - 6000 250 at 1500 - 3500 Premium unleaded 95 RON Exhaust turbocharger 3-way catalytic converter EU 6Reference For more detailed information about the 1.4l TFSI engine, refer to Self Study Programme 616 "Audi 1.2l and 1.4l TFSI engines of the EA211 series".17 BackForward Ξ ContentsTorque/power curve of 2.0l TFSI engineEngine with code CZPB Power output in kW Torque in NmEngine speed [rpm]654_072Features Engine code Type Displacement in cm Stroke in mm Bore in mm Number of valves per cylinder Compression ratio Power output in kW at rpm Torque in Nm at rpm Fuel type Turbocharging Exhaust gas treatment Emission standard3Specifications CZPB 4-cylinder inline engine 1984 92.8 82.5 4 11.65 : 1 140 at 4180 - 6000 320 at 1500 - 4180 Premium unleaded 95 RON Exhaust turbocharger 3-way catalytic converter EU 6Reference For more detailed information about the 2.0l TFSI engine, refer to Self Study Programme 606, "Audi 1.8 and 2.0l TFSI EA888 series engines (third generation)".18 BackForward Ξ ContentsDiesel enginesTorque/power curve of 1.6l / 2.0l TDI engine1.6l TDI engine with code DDYA Power output in kW Torque in Nm 2.0l TDI engine with code CRFC Power output in kW Torque in NmEngine speed [rpm]654_004Engine speed [rpm]654_078Features Engine code Type Displacement in cm3 Stroke in mm Bore in mm Number of valves per cylinder Compression ratio Power output in kW at rpm Torque in Nm at rpm Engine management Maximum injection pressure in bar Exhaust gas treatment Emission standardSpecifications DDYA 4-cylinder inline engine 1598 80.5 79.5 4 16.2 : 1 85 at 3250 - 4000 250 at 1500 - 3200 Bosch EDC 17 1800 with solenoid injectors, 8-hole nozzles Oxidising catalyst, SCR coated diesel particulate filter, oxygen sensors EU 6 (W) CRFC 4-cylinder inline engine 1968 95.5 81.0 4 16.2 : 1 105 at 3500 - 4000 320 at 1750 - 3000 Bosch EDC 17 2000 with solenoid injectors, 8-hole nozzles Oxidising catalytic converter, oxygen sensor EU 4Reference For more detailed information about the diesel engines of the Modular Diesel Platform, refer to Self Study Programme 608 "Audi 1.6l / 2.0l 4-cylinder TDI engines".19 BackForward Ξ ContentsTorque/power curve of 2.0l TDI enginesEngine with code DFGA Power output in kW Torque in Nm Engine with code DFHA Power output in kW Torque in NmEngine speed [rpm]654_005Engine speed [rpm]654_006Features Engine code Type Displacement in cm3 Stroke in mm Bore in mm Number of valves per cylinder Compression ratio Power output in kW at rpm Torque in Nm at rpm Engine management Maximum injection pressure in bar Exhaust gas treatment Emission standardSpecifications DFGA 4-cylinder inline engine 1968 95.5 81.0 4 16.2 : 1 110 at 3500 - 4000 340 at 1750 - 3000 Bosch EDC 17 DFHA 4-cylinder inline engine 1968 95.5 81.0 4 16.2 : 1 140 at 3500 - 4000 400 at 1900 - 3300 Bosch EDC 172000 with solenoid injectors, 8-hole nozzles Oxidising catalyst, SCR coated diesel particulate filter, oxygen sensors EU 6 (W) EU 6 (W)Reference For more detailed information about the diesel engines of the Modular Diesel Platform, refer to Self Study Programme 608 "Audi 1.6l / 2.0l 4-cylinder TDI engines".20 BackForward Ξ ContentsSCR systemTh reducing agent tank houses the filler neck, the reducing agent heater control unit and the delivery module. A separate tank vent houses a ventilation module and an equalisation module, which are requirements for rapid ventilation of the reducing agent system. In the area of the delivery module inside the reducing agent tank, a surge tank and baffles dampen the sloshing movement of the reducing agent. The delivery module is welded securely to the reducing agent tank. Only the delivery unit is bolted into the delivery module and can be replaced if servicing is required. All functions are activated and controlled by the engine control unit J623. The delivery module houses the following components: • • • • • • Reducing agent tank heater Z102 Reducing agent level sensor G697 Reducing agent pump V437 Reducing agent recirculating pump V561 Reducing agent temperature sender G685 FilterVentilation valve headEqualisation chamberReducing agent filler neckBaffle Surge tankReducing agent tankReducing agent heater control unit J891Ventilation membrane Delivey module with: • Heater • Reducing agent quality sensor G697 • Delivery unit with delivery and recirculation pump • Temperature sensor • FilterBaffle654_008Reference For more detailed information about the SCR system, refer to Self Study Programme 625 "Audi A3 saloon".21 BackForward Ξ ContentsEngine/gearbox combinationsUse of the engine-gearbox combinations shown here is marketspecific. Petrol engines 1.0l TFSI engine (CHZJ) 85 kW 1.4l TFSI engine (CZEA) 110 kW 2.0l TFSI engine (CZPB) 140 kW6-speed Manual gearbox 0AJ MQ200-6F6-speed Manual gearbox 02S MQ250-6F6-speed Manual gearbox 0BB MQ350-6F7-speed dual-clutch gearbox 0CW DQ200-7F7-speed dual-clutch gearbox 0GC DQ381-7ARear axle drive 0BR with all-wheel-drive clutch 0CQ (5th generation)Breakdown of manufacturer codes: e.g.: MQ350-6F A M D Q Automatic planetary gearbox Manual gearbox Dual-clutch gearbox Transverse configuration 6 F Q/A Number of gears Front-wheel drive quattro all-wheel drive350 Development number (indicates the torque capacity)22 BackForward Ξ ContentsDiesel engines1.6l TDI engine (DDYA) 85 kW2.0l TDI engine (CRFC) 105 kW2.0l TDI engine (DFGA) 110 kW2.0l TDI engine (DFHA) 140 kW6-speed Manual gearbox 02S MQ250-6F 7-speed dual-clutch gearbox 0CW DQ200-7F6-speed dual-clutch gearbox 0D9 DQ250-6F7-speed dual-clutch gearbox 0GC DQ381-7F7-speed dual-clutch gearbox 0GC DQ381-7ARear axle drive 0BR with all-wheel-drive clutch 0CQ (5th generation) Rear axle drive 0CQ with all-wheel-drive clutch 0CQ (5th generation)23 BackForward Ξ ContentsPower transmissionOverviewThe design of the Audi Q2 (type GA) follows the principles of the Modular Transverse Matrix (MQB). Depending on engine-gearbox combination (refer to page 22), the Audi Q2 is available with frontwheel drive or with all-wheel drive. The proven quattro drive system is used for models with all-wheel drive. Either the 0BR rear axle drive with all-wheel-drive clutch or the 0CQ rear axle drive with all-wheel-drive clutch is used, depending on engine power output. In addition to the well-known six-speed manual gearboxes and the 0CW and 0D9 dual-clutch gearboxes, there is 7-speed dual-clutch gearbox 0GC which can be used for both front and all-wheel drive. Refer to page 26.Rear axle drive 0CQ with all-wheel-drive clutchAll-wheel-drive control unit J492Rear axle driveAudi Q2 models with quattro drive and an engine delivering over 400 Nm of torque come equipped with the rear axle drive 0CQ with all-wheel-drive clutch. Audi Q2 models with quattro drive and less torquey engines are equipped with rear axle drive 0BR and an all-wheel-drive clutch. Both final drives house the 0CQ all-wheel-drive clutch. This is the fifth generation of the electrohydraulically controlled all-wheeldrive clutch. For information about this technology, refer to SSP 609 "Audi A3 ’13" (type 8V) and SSP 630 "Audi TT (type FV)".All-wheel-drive clutch pump V181All-wheel drive clutch 0CQ654_15224 BackForward Ξ ContentsEmergency-releasing the parking lockThe yellow release lever for emergency releasing the parking lock can be accessed by removing the clips to detach the selector lever gaiter from the centre console. The parking lock can now be released by inserting a screwdriver into the slot in the yellow release lever and pushing the lever back. If the locking button is now pressed, the selector lever can be moved out of the P position and the parking lock released via the selector lever Bowden cable.Selector mechanismIn terms of its type, operation and design, the selector mechanism is identical to the selector mechanism of the Audi A3 (type 8V) as described in SSP 609.Selector lever position display unit Y26Lock buttonConnector for Y26Emergency release lever654_154Selector lever gaiterSelector lever654_153Selector lever position display unit Y26 Selector mechanism, with selector lever sensors control unit J587Selector lever cable7-speed dual clutch gearbox 0GC. Refer to page 26.654_151 25 BackForward Ξ Contents7-speed dual-clutch gearbox 0GC7-speed dual-clutch gearbox 0GC is an advanced development based on 7-speed dual-clutch gearboxes 0BH, 0DL and 0DE. Refer to SSP 454 "The 7-speed dual-clutch gearbox 0BT in the T5 2010". The 0GC gearbox has the in-house designation DQ381-7F for front-wheel-drive vehicles and DQ381-7A for all-wheel-drive vehicles. The 0GC gearbox is rated for peak input torque of 420 Nm.The key new features of the 0GC gearbox compared to previous gearboxes are principally aimed at increasing efficiency: • A horizontal hydraulic oil filter. • Friction-optimised bearings in the drive shafts and in the differential. • Friction-optimised seals in the rotary inlets for the clutches between the clutch cover and the gearbox input hub and in the drive shaft bearings. • An ATF with reduced viscosity reduces friction losses in the gear set. • A leakage-optimised hydraulic system provides a low pressure level, with the result that less pump capacity is required. • An ATF supply with a twin-pump system Refer to page 28.7-speed dual-clutch gearbox 0GC control unit Gearbox vent Hydraulic oil filter, lifetime Clutch coverElectrical connection of auxiliary hydraulic pump 1 for gear oil V475, 4-pinBevel box ventMTF filler and inspection screwAuxiliary hydraulic pump 1 for gear oil V475MTF drain screwRight-angle transfer boxGearbox input hub26 BackForward Ξ ContentsMechatronic unit J743The mechatronic unit of the 7-speed dual-clutch gearbox 0GC runs in an ATF oil bath. In terms of its design, it is largely identical to the mechatronic unit of 7-speed dual-clutch gearbox 0BT as described in SSP 454. Leakage losses have been reduced by using sliding seat valves. An additional pressure control valve N218 has been integrated into the hydraulic system. It controls the supply of ATF by auxiliary hydraulic pump 1 for gear oil V475. Refer to page 28.Gear setThe gear set with sub-gearboxes 1 and 2 is largely identical to the gear set of the gearbox described in SSP 454 "The 7-speed dualclutch gearbox 0BT in the T5 2010". The odd gears 1, 3, 5 and 7 are assigned to sub-gearbox 1. The even gears 2, 4, 6 and R are assigned to sub-gearbox 2.Parking lock leverATF coolerGear setElectrical connection of mechatronic unit J743, 16-pin Friction-optimised rotary inlets for clutches K1 and K2Drive gear for main ATF pumpMechatronic unit J743Clutch K2Clutch K1Main ATF pump654_155 27 BackForward Ξ ContentsMechatronic unit J743The gear set, the dual clutches and the mechatronic unit J743 are share a common ATF supply. The mechatronic unit has its own oil reservoir, which is flooded with ATF up to the overflow rim. This means that all solenoid valves run in an oil bath, which ensures complete ventilation of the electro-hydraulic unit and cools the solenoid valve coils. The ATF level in the oil reservoir for the gear set is kept to a minimum in order to avoid unnecessary churning losses.Auxiliary hydraulic pump 1 for gear oil V475 The auxiliary hydraulic pump V475 is a unit comprising the duocentric pump and an electric motor. The pump is supplied with electrical power via a separate 4-pin connector. The pump electronics receive their instructions from the mechatronic unit J743 via the powertrain CAN. If required, the pump assists with the following: • • • • ATF supply to clutches K1 and K2 in start-stop mode. Clutch cooling with ATF. ATF supply to the shift hydraulics in coasting mode. Lubrication of the gear set and the shafts with ATF.Electric motor for auxiliary hydraulic pump ATF level in mechatronic unit oil reservoir (overflow rim) ATF level for gear set (overflow pipe)654_157ATF high-pressure circuit, hydraulic oil supply for the clutches and the shift hydraulicsATF low-pressure circuit, cooling oil for the clutches and lubricating oil for the gear set and shafts Electrical connection of auxiliary hydraulic pump 1 for gear oil V475, 4-pinNon-return valve Changeover valve Auxiliary hydraulic pump Control linePowertrain CAN low Powertrain CAN highHydraulic oil / cooling oil switchover valve The supply of ATF by the auxiliary hydraulic pump is controlled by a hydraulically actuated 3/2 way valve, which is activated by the pressure control valve N218 integrated in the mechatronic unit J743. In the non-activated state, the switchover valve directs the flow from the auxiliary hydraulic pump into the high-pressure circuit of the mechatronic unit J743 and thereby assists in supplying the gearbox with hydraulic oil. If the switchover valve is activated via the pressure control valve N218, the flow from the auxiliary hydraulic pump is directed into the low-pressure circuit in order to cool the clutches and lubricate the gearbox. The non-return valve which follows the 3/2-way valve is kept closed by high pressure applied in the reverse direction.ATF suction filterATF sump654_158ICE EM Internal combustion engine Main oil pump drive Electric motor Auxiliary hydraulic pump drive28 BackMain ATF pump The main ATF pump is driven permanently and mechanically via a gear which is connected directly to the dual clutches. The main oil pump has been made smaller and more efficient by reducing leakage losses through the use of sliding seat valves among otherForward Ξ Contentsthings. To compensate for load peaks and to make possible functions such as start-stop mode or coasting mode, the main oil pump is assisted by the auxiliary hydraulic pump V475. The main ATF pump performs the following tasks: • Supply of ATF to clutches K1 and K2. • Clutch cooling with ATF. • Supply of ATF to the shift hydraulics. • Lubrication of the gear set and the shafts with ATF.7-speed dual-clutch gearbox 0GC for all-wheel drive (shown without bevel gear)Main ATF pumpAutomatic gearbox pressure control valve 1 N218 (controls gearbox hydraulic oil / cooling oil switchover valve when required).Control lineATF drain screw for mechatronic unit oil reservoir Magnets for separating chipsHydraulic oil / cooling oil switchover valve Overflow pipe Pressure end of auxiliary hydraulic pump ATF suction filterATF drain screw with ring seal654_155Note The ATF level for the mechatronic unit oil reservoir and the gear set is controlled via the overflow rim in the mechatronic unit oil reservoir and via the overflow pipe. During vehicle operation, the mechatronic unit oil reservoir fills up with the oil diverted from the solenoid valves. When changing the ATF and checking the ATF level, follow the instructions given in the workshop manual.29 BackForward Ξ ContentsGearbox functions and functions influencing the gearbox control unitAudi drive select Audi drive select can be used to select between different vehicle configurations, i.e. modes. The following modes are available in the Audi Q2: efficiency, comfort, auto, dynamic and individual. The gearbox setups are tailored to the customer's requirements in a country-specific fashion. For this reason, only typical differences between the various modes can be shown here. In efficiency mode the shift points for automatic gearboxes are shifted to lower engine speeds and coasting mode is available in drive position D, provided that the conditions for this are met (refer to owner's manual). This allows more fuel-efficient driving. In the comfort and auto modes, the gearbox shift points are comfort-oriented, well balanced and designed for everyday use. Iin the sporty dynamic mode, the gearbox adjusts its shift points to higher up the rev band. In individual mode the driver can freely select an engine/gearbox setup irrespective of other vehicle systems under the Audi drive sel ect modes comfort, auto or dynamic. Other functions In addition to Audi drive select, the gearbox control unit participates in other vehicle functions. These include: • The kickdown function • Manual gear-shifting (tiptronic mode) • The Launch Control Program (available with 0GC / 0D9 gearboxes only) • Coasting mode • The start-stop system • Downhill assist These functions should be sufficiently well known. They serve partly to enhance comfort and partly to increase driving efficiency. You will find a description of these functions in the owner's manual.ServiceUsing the diagnostic tester The options for diagnosis of 7-speed dual-clutch gearbox 0GC and all-wheel drive clutch 0CQ are shown here. The diagnostic functions can be accessed by selecting the relevant address code using the diagnostic tester.Address code 0002 Gearbox electronics The automatic gearbox control unit is addressed via address code 02 Gearbox electronics. The diagnostic results can be obtained via the 0GC gearbox and the selector lever sensors can be queried. In addition, the listed diagnostic functions can be used for assessment and handling of the 0D6 gearbox. • Identification services • Check SVM control unit configurationThe validity of the software, the coding and the adaption channels for the vehicle is checked. • Event memory Read / Clear • Basic setting of mechatronic unit • Reset installation information • Basic setting of gearbox, the adaption values of the mechatronic unit are reset, quick adaption of the clutches and the gear actuators is performed • Gearbox adaption cycle• Replace mechatronic unit After replacing the mechatronic unit, the following work must be carried out: • Teach in immobiliser • Check the mechatronic unit coding • Basic setting of the gearbox • Read measured data • Encode control unit • Adapt installation information This must be done after the following work • Updating the software • Replacing the control unit • Replacing the selector lever • Working on the steering wheel paddles • Replacing a control unit, e.g. for the engine, ABS or gateway • Check the oil level The ATF temperature display aids checking the ATF level.30 BackAddress code 0022 - All-wheel-drive electronics The all-wheel-drive control unit J492 can be selected with the diagnostic tester by entering address code 0022 - All-wheel-drive electronics, and the diagnostics results can be queried via all-Forward Ξ Contentswheel-drive clutch 0CQ. In addition, the listed diagnostic functions can be used for assessment and handling of all-wheel-drive clutch 0CQ.• Control unit identification • Check SVM control unit configurationThe validity of the software, the coding and the adaption channels for the vehicle is checked. • Event memory Read / Clear • Actuator diagnostics To activate the actuator diagnostics, the internal combustion engine must be running, the ATF temperature must be under 60 °C and the vehicle must be at a standstill. If the actuator diagnostics are active, the all-wheel-drive clutch is kept closed until the vehicle reaches a speed of 6 kph. Driving the vehicle with the steering at full lock while the actuator diagnostics are active puts strain on the driveline, causing the rear axle to shudder. The all-wheel-drive clutch opens when the vehicle reaches a speed of 6 kph, noticeably relieving the strain on the driveline - an indication that the all-wheel-drive clutch is working.• Basic settingThe basic setting function can be used to assign the all-wheel-drive clutch pump V181 to a matching characteristic curve stored in the all-wheel drive control unit J492. • Read measured data • Replace control unit This function contains all steps necessary to replace the control unit.Emergency operation of the all-wheel drive On the printed circuit broad of the all-wheel drive control unit J492 there are two temperature sensors which monitor the electronic components. The temperature of the clutch plates is calculated. Depending on which temperature threshold is exceeded, the all-wheel-drive clutch function is deactivated. This is not indicated to the driver by a warning lamp.Replacing the all-wheel-drive clutch pump V181 The first thing to do after replacing the all-wheel-drive clutch pump is to correct the all-wheel-drive oil level. A basic setting procedure must then be performed on the stationary vehicle and the oil level checked again. The final step is to run an actuator test.Gearbox warning lamps If the red gearbox warning light appears in the instrument cluster, the driver is instructed to stop the vehicle.Towing If a situation arises where it becomes necessary to tow an Audi Q2 with automatic gearbox, the usual restrictions on automatic gearboxes apply: • Disengage the parking lock using the emergency release lever. Refer to page 25. • Selector lever in N. • Max. towing speed 50 kph. • Max. towing distance 50 km. • If the vehicle is to be towed with an axle raised, only the front axle should be raised. Reason When the engine is at standstill, the oil pump is not driven and certain parts of the gearbox are not lubricated. Failure to comply with the towing conditions can lead to serious gearbox damage. Note Note the other descriptions and notes on the topic of tow-starting and towing in the owner's manual.If the yellow gearbox warning light appears in the instrument cluster, it is normally possible to continue driving the vehicle. Driver information is displayed informing the driver what to do.Note For detailed and up-to-date information, refer to the vehicle owner's manual.31 BackForward Ξ ContentsSuspensionOverall conceptThe suspension system of the Audi Q2 is based largely on proven technology used previously in other Audi models. Use is made of components and functions previously exclusive to higher-end models. A McPherson strut-type axle is used at the front. Models with quattro drive come equipped with a multilink rear axle. Front-wheel-drive models receive a torsion beam axle. The active suspension system with electronic damper control is the top-of-the-range option. The Q2 also uses the electro-mechanical steering system (EPS) known from the Audi A3 (type 8V) and an electro-mechanical parking brake (EPB). Progressive steering is standard. A wide range of steering wheels, wheels and tyres is available for customisation. ACC is optional. Functions previously exclusive to higher-end models are, therefore, now available for the Audi Q2.654_130The Audi Q2 is available in front-wheel-drive and quattro all-wheel-drive versions. The following suspension variants can be ordered: Suspension variants Dynamic suspension (PR no. for the following spring/ damper combinations: G01/G02/G03/ G04/G95)1) Dynamic suspension (PR no. for the following spring/ damper combinations: G31/G32/G33/ G34)1) Suspension with adaptive damping Features The standard suspension as basic equipment features steel springs and non-adaptive air suspension. A balanced suspension setup has been achieved.This suspension system is optional and is based on the dynamic suspension system. The springs, dampers and anti-roll bars are set up for distinctly sporty handling. Ride height has been lowered by 10 mm compared to the dynamic suspension system. This suspension system is optional. For the first time in an Audi, adaptive suspension is available in combination with a torsion beam rear axle. Ride height is identical to that of the dynamic suspension.1)Production control number32 BackForward Ξ ContentsAxles and wheel alignmentFront axleThe front axle is based on that of the Audi A3 (type 8V). The steel subframe is a new development. The track control arms have been adapted to handle the higher axle loads of the Audi Q2. The bearing elements of the track control arms have been redesigned in terms of their elastokinematic characteristics. The plain bearings used in the Audi TT (type FV) are employed as suspension strut bearings.654_131Rear axleFront-wheel-drive models All front-wheel-drive models come equipped with a torsion beam rear axle. The basis for this is the axle of the Audi A3 (type 8V) with sport suspension. The requisite wider wheel spacing is achieved by using a newly developed kingpin.654_132Models with quattro all-wheel drive All quattro models are fitted with the multi-link rear axle of the Audi A3 (type 8V). By way of deviation from this, the wheel mounts of the Audi TT (type FV) are used (for a wider wheel spacing).Wheel alignment and suspension setup654_133The wheel alignment and suspension setup is procedure us identical to that for the Audi A3 (type 8V). The setting points are also identical.33 BackForward Ξ ContentsDynamic Chassis Control (DCC)Dynamic Chassis Control (DCC) is optional in the Audi Q2. In terms of its design and working principle, the system is basically identical to the systems already in use on other Audi models. For the first time in an Audi, the system is also available in combination with a torsion beam rear axle. The damper control function is always engaged during vehicle operation and cannot be deactivated by the driver. The damper valves are not activated when the vehicle is at a standstill. The driver can set the damper characteristic with Audi drive select, either using a separate switch in the switch panel or directly in the MMI. The last setting selected stay active after a terminal 15 reset. The electronic damper control system has 3 different damping characteristics. Depending on the setting chosen in Audi drive select, the system activates maps which provide a medium, comfort-oriented or sporty characteristic. The highest damping forces are produced when a current of about 1.9 A is applied.Damper with damping adjustment valve, rear left N338Vehicle level sensor, rear G76Damper damping adjustment valve, front left N336Vehicle level sensor, front left G78Rear body acceleration sensor G343Control unit in instrument panel J285Front left body acceleration sensor G341Front right body acceleration sensor G342Damper with damping adjustment valve, rear right N339Electronically controlled damping control unit J250Vehicle level sensor, front right G289Damper with damping adjustment valve, front right N337654_134 34 BackForward Ξ ContentsSystem response to faultsIf the control unit fails, if it is not possible to activate the dampers; and if no measurement data is supplied by two vehicle level sensors, the control system is shut down. The damper valves are designed in such a way that medium damping forces (basic damping) are produced in a neutral (nonactivated) state. The vehicle remains dynamically stable despite the corresponding loss of comfort. The system shutdown is indicated to the driver by the usual yellow pictogram (damper icon) and by a text message. If the signal from a vehicle level sensor is not available, a substitute signal is generated from the measurement data supplied by the other sensors and the control system stays active.Service operationsThe Dynamic Chassis Control system can be accessed address code 0014 - Wheel damping electronics on the diagnostic tester. After a new control unit has been encoded online, the basic setting procedure must be carried out. For this purpose, the vehicle should be raised on the hydraulic lift far enough for the wheel to lose ground contact (dampers are fully extended). The measurement data supplied by the vehicle level sensors is assigned to the damper piston positions and stored in the control unit. After replacing a damper or a vehicle level sensor, the basic setting procedure described above must be carried out. The actuator diagnostics can be used to perform a general function check. This damper valves are selectively activated and the actual and target current levels are indicated. A fixed differential amount may not be exceeded.Brake systemThe Audi Q2 is equipped with a generously dimensioned brake system which offers high performance reserves in any driving situation. The electro-mechanical parking brake (EPB) and the ESC system are carry-overs from the Audi A3 (type 8V). In place of the Sport mode in the Audi A3, the Offroad mode can be activated in the Audi Q2 by briefly pressing the ESC button (for less than 3 s). This provides improved traction, where required. The service operations and the diagnostic functions are identical to those for the ESC/EPB systems in the Audi A3 (type 8V). The dynamic package includes brake calipers with a red paint finish.Wheel brake system Minimum wheel size Brake type Number of pistons Piston diameter Brake disc diameterFront axle 16“ TRW floating caliper brake 1 57 mm 312 mmRear axle 15“ Continental floating caliper brake 1 38 mm 272 mm654_135654_13635 BackForward Ξ ContentsSteering systemThe Audi Q2 is equipped with an electro-mechanical steering system (EPS). In terms of design, mode of functioning and service operations, the system is identical to that used in the Audi A3 (Type 8V). Special steering maps which can be activated with Audi drive select were developed. Likewise, the mechanically adjustable steering column is similar to that of the Audi A3 (Type 8V). An electrical adjustment is not available in this vehicle class.Electromechanical power steering (EPS)654_137Steering wheelsThe basic trim features a three-spoke PUR steering wheel. Audi also offers options for the Q2 (13 versions) ranging from a threespoke leather steering wheel to a three-spoke leather steering wheel with flattened rim, multifunction buttons and tiptronic.654_138Three-spoke multifunction leather steering wheel with flattened rim and tiptronic controlsadaptive cruise control (ACC)System overviewAn ACC system by Continental is used in the Audi Q2 for the first time in an Audi model. As with the ACC systems used prevously in Audi models, the control unit, sensor and receiver are integrated in a unit. The Audi Q2 uses a sensor unit which is located centrally at the bottom of the bumper. The control unit is connected to the front camera for driver assistance systems R242 via a private CAN (sub-bus system) and to the vehicle via the extended CAN bus. The system is operated by the driver in the same way as in other Audi models. If the vehicle has Audi drive select, the ACC drive program is coupled to the setting selected here. Alternatively, the ACC can be custom-configured using the individual setting. If the vehicle is not equipped with Audi drive select, the ACC drive program is selected via a separate menu.654_139 36 BackForward Ξ ContentsADR sender, right G259 and ACC control unit J428The sensor has two radar transmitter units and three receiver units. One receiver unit evaluates specifically the vertical signals. This gives a horizontal radar acquisition range of about +/- 45° at close range (up to approx. 40 m). The maximum range is approximately 170 m. The horizontal radar acquisition range is about +/-9° outside the close range. The reflector lens is not heated. The operating range of the ACC is 0 kph – 200 kph. A target speed can be set within the range from 30 kph to 200 kph.Effective width [m]654_129ACC auxiliary functionsThe Audi Q2 has the following ACC auxiliary functions known from other Audi models: • Stop & Go ACC The Audi Q2 is ready to restart in three seconds. The extended restart readiness function implemented in several other Audi models is not available. ACC reacts to stationary objects. • Distance indicator / distance warning • Traffic jam assist The vehicle is guided longitudinally by the ACC system and transversely by the camera for driver assistance systems. In the Audi Q2 with traffic jam assist a measurement data from the ACC and camera is not combined like in the Audi A4 (type 8W) and in the Audi Q7 (type 4M). • Control behaviour when cornering To avoid critical situations in terms of driving dynamics, cornering speed is not increased further by the ACC system during an acceleration phase, if necessary. The predictive route data from the vehicle navigation system is not evaluated by the ACC system in the Audi Q2. The Audi Q2 does not have predictive cornering speed control, as implemented for example in the Audi A4 (type 8W) and Q7 (type 4M) with ACC. The Audi Q2 controls uses vehicle dynamics data for speed control while cornering. • Boost function 1) • Overtaking assistance 1) • Start-off monitoring 1) Start-up of the Audi Q2 is monitored by evaluating the ACC radar signals only. • Lane change assistance 1) • Right lane overtaking prevention 1)1) he basic functional principle is identical to that of same-named functions on other current Audi models. Depending on model and T country, there are minor differences in terms of applications.Reference For detailled information about ACC functions, refer to Self Study Programme 620 "Audi ACC systems"as well as the relevant owner's manuals.Effective length [m]37 BackForward Ξ ContentsService operationsThe components of the ACC system also have self-diagnostic capability in the Audi Q2. The ACC control unit J428 can be addressed with the diagnostic tester using diagnostic code 0013.The system monitors the horizontal and vertical settings of the radar sensor (sender) on the basis of a statistical evaluation of objects detected. A key new service feature is that manual calibration of the sensors is no longer required. If misalignment of a sensor is detected by statistical evaluation, an offset value can be applied to the measurement data. At the same time, the system is able to compensate for misalignment values of +/- 6°. On completion of the work specified in the workshop manual (e.g. removal/installation of the ACC unit, adjustment of specific axle setting values), the reinstalled components must be calibrated at a wheel alignment workstation by following the usual procedure. The geometric drive axis of the vehicle is determined by an initial measurement. The reflector mirror of the setting device (VAS 6430/1 with ACC reflector mirror VAS 6430/10) is aligned at right angles to the vehicle. ACC is activated by the diagnostic tester. The misalignment angle is determined on the basis of the radar signals reflected by the reflector mirror. The ACC systems used previously in Audi models are set by the mechanic via the setting screws on the ACC unit. This work is no longer necessary in the Audi Q2. The ACC control unit determines the required correction factors and compensates electronically for the misalignment.654_139a654_140Reflector mirror for setting the radar sensor For detailed information about setting the radar sensor, refer to the current workshop manual as well as the programs running on the wheel alignment computer and the diagnostic tester. For alignment of an Audi Q2, the previously used reflector mirror VAS 6430/3 must be replaced with the new, slightly larger reflector mirror VAS 6430/10.VAS 6430/3VAS 6430/10654_14138 BackForward Ξ ContentsWheels and tyresThe Audi Q2 comes equipped as standard with 16" steel wheels. Wheels in sizes from 16" to 18" can be ordered from AUDI AG as optional equipment. The range of tyres for the engine versions available at launch extends from 205/60 R16 to 215/50 R18. Tyres with run flat capability are not available. The Tire Mobility System (TMS) is standard equipment. A space saver spare wheel is optional. The car comes with a jack if ordered factory-fitted with winter wheels and if equipped with an optional space saver wheel. The maximum tightening torque for the wheel bolts on the Audi Q2 is 140 Nm.Standard wheels 6.0J x 16 Steel wheel with full cap 205/60 R16Winter wheels 6.0J x 161) Steel wheel with full cap 205/60 R16 7.0J x 17 Cast aluminium wheel 215/55 R17Optional wheels 7.0J x 18 Cast aluminium wheel 215/50 R18 7.0J x 18 Cast aluminium wheel 215/50 R18 7.0J x 18 Cast aluminium wheel 215/50 R187.0J x 17 Cast aluminium wheel 215/55 R177.0J x 17 Cast aluminium wheel 215/55 R177.0J x 17 Cast aluminium wheel 215/55 R1776.5J x 16 Cast aluminium wheel 215/60 R167.0J x 17 Cast aluminium wheel 215/55 R171)Suitable for snow chains. Low tyre pressure indicatorThe second-generation low tyre pressure indicator (RKA+) is available as basic equipment for the Audi Q2. In terms of design and function, operation and driver information as well as service and diagnosis functions, the system corresponds to those already used in other Audi vehicles.39 BackForward Ξ ContentsElectrics and electronicsPower supplyCar batteryThe battery of the Audi Q2 is housed in the engine bay and protected by a battery box. Battery size and type are dependent on engine version, trim and country specification. Standard batteries, EFB batteries and AGM batteries are used. • All models without a start-stop system come fitted with a standard battery. • Models with a start-stop system come fitted with an EFB, irrespective of engine version. • Vehicles with an auxiliary heater generally come equipped with an AGM battery.EFB batteryAn EFB (Enhanced Flooded Battery) can be regarded as a heavyduty wet-cell battery. The positive plate inside the battery is coated with an additional polyester scrim. This provides additional hold for the active battery material. The deep-cycle resistance is higher than that of conventional batteries. An EFB is charged in exactly the same way as a conventional battery.AGM batteryIn AGM batteries, the battery electrolyte is bound in a microporous glass matting. In addition to having higher deep-cycle resistance than an EFB battery, the AGM battery is noted for its leak-proof construction. When charging an AGM battery, it is important to follow the charger's operating instructions and, where applicable, to program the charger for AGM batteries.The following batteries are used on the Audi Q2: Standard battery 72 Ah/380 A EFB battery 59 Ah/320 A 69 Ah/360 A 70 Ah/420 A AGM battery 68 Ah/380 ABattery bracketAs the battery housing can vary in length, there are multiple holes in the battery bracket for fastening batteries in different sizes.Hole 1 Hole 2 Hole 3654_101 40 BackForward Ξ ContentsFusesIn addition to standard flat fuses, space-saving mini fuses and circuit breakers (thermal fuses), the Audi Q2 uses the new J-Case fuse first fitted in the Audi A3 (type 8V). As with the standard and mini fuses, these fuses are assigned to the corresponding nominal currents by plastic casings in different colours.J-Case fusesJump-start connection on the engine bulkhead (also used for charging the battery)654_103Ground terminal with battery monitor control unit J367Battery positiveCar battery654_102654_104Fuse rail on the e-box Designation of the fuses in current flow diagram "SA"E-box with fuses and relays, designation of the fuses in current flow diagram "SB"Fuseholder and relay carrier under the dash panel on the left, designation of the fuses in current flow diagram "SC"Multi-fuse The multi-fuse mounted on the front of the e-box is again used in the Audi Q2. Several fuses with different ratings are grouped together to form a fuse strip or multi fuse. On this rail are fuses for protecting, e.g., the alternator, the electro-mechanical steering and the radiator fan. In the event of a fault, only the complete fuse rail can be replaced.41 BackForward Ξ ContentsInstallation locations of the control unitsSome of the control units shown in the overview are optional and/ or country-specific equipment. Refer to the current service literature for details of control unit installation positions, as well as instructions for installation and removal.J387J364 J869 J104J794J518R242 J428 J500 J685 J844J234 J255E380 J587J743V475J745 J898 J285J527 J764J623 J791 J519 J533J386Key: E380 Multimedia system control panel J104 J234 J250 J255 J285 J345 J364 J386 ABS control unit Airbag control unit ECD control unit (electronically controlled damping) Climatronic control unit Control unit in dash panel insert Trailer recognition control unit Auxiliary heater control unit Driver door control unit J387 J428 J492 J500 J518 J519 J525 J527 J533 J587 Door control unit, front pass. side ACC control unit All-wheel-drive control unit Power steering control unit Entry and start authorisation control unit Electrical system control unit Digital sound package control unit Steering column electronics control unit Data bus diagnostic interface Selector lever sensors control unit42 BackForward Ξ ContentsJ769J250J772 J492J525J605J345 J843 J770654_076J605 J623 J685 J743 J745 J764 J769 J770 J772 J791 Boot lid control unit Engine control unit MMI display Mechatronic unit for dual-clutch gearbox Adaptive cornering light and headlight range adjustment control unit Control unit for electric steering column interlock Audi side assist control unit Audi side assist control unit 2 Rear-view camera system control unit Park assist steering control unitJ794 J843 J844 J869 J898 Information electronics control unit 1 Interface control unit for vehicle location system Main beam assist control unit Structure-borne sound control unit Windscreen projection control unitR242 Front camera for driver assistance systems V475 Auxiliary hydraulic pump 1 for gear oil43 BackForward Ξ ContentsTopologyLight switch E1Alarm horn H12Anti-theft alarm sensor G578Rain and light detector sensor G397Sliding sunroof adjustment control unit J245Humidity sensor G355Electrical system control unit J519Control unit panel insert J285Background lighting moduleSteering column electronics control unit J527Entry and start authorisation control unit J518Driver side volume control E67Multimedia system control panel E380Electronic steering column lock control unit J764 Diagnostic port Trailer recognition control unit J345 Data bus diagnostic interface J533MMI display J685Door control unit, rear driver side J926Driver side door control unit J386NOx sensor control unit J583Engine control unit J623Door control unit, rear pass. side J927Front pass. side door control unit J387Structure-borne sound control unit J8