TECHNICAL DOCUMENTATION

SSP 800153 – 2016 Passat and New Technologies

PDFEN44 pages2 MB
SSP 800153 – 2016 Passat and New Technologies - PDF cover

This PDF is currently unavailable.

Read document text
Service TrainingSelf Study Program 8001532016 Passat and New Technologies Volkswagen Group of America, LLC Volkswagen Academy Printed in U.S.A. Printed 10/201 5 Course Number SSP 8001 53 V2.0©201 5 Volkswagen Group of America, LLC. All rights reserved. All information contained in this manual is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, LLC., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. All requests for permission to copy and redistribute information should be referred to Volkswagen Group of America, LLC. Always check Technical Bulletins and the latest electronic repair information for information that may supersede any information included in this booklet. Trademarks: All brand names and product names used in this manual are trade names, service marks, trademarks, or registered trademarks; and are the property of their respective owners. ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Engines and Transmissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Running Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Electrical Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Networking ..................................................................................................................................... 22 KESSEY ........................................................................................................................................... 27Infotainment Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Knowledge Assessment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38NoteImportant!This Self-Study Program provides information regarding the design and function of new models. This Self-Study Program is not a Repair Manual. This information will not be updated.For maintenance and repair procedures, always refer to the latest electronic service information.i Page intentionally left blank for printing purposes Introduction2016 Passat Product FeaturesThe illustration lists new and important product features of the Passat..• Adaptive Cruise Control • Lane Assist • Blind Spot Monitor • Car-Net • LED Taillamps• Park Assist• Rear Traffic Alert• MIB II Infotainment System• LED HeadlampsNot all features listed are standard equipment.1 Introduction2016 Passat Distinguishing Features• Bumper and Body Panel Changes• Headlamp Design/ LED Headlamps• Foglamp Redesign• Trunk and Bumper Redesign• Taillamp Design/ LED Taillamps2 IntroductionTechnical DataExterior Dimensions and Weights36.6 in1 10.4 in 191 .9 in44.9 in62. 1 in 72.2 in 61 .0 inExterior Dimensions Passat Length Width Height Wheelbase Track width at front Track width at rear Turning circle 2012 191 .6 in 72.2 in 58.5 in 1 10.4 in 62. 1 in 61 .0 in 36.4 ft 2016 191 .9 in 72.2 in 58 in 1 10.4 in 62. 1 in 61 .0 in 36.4 ftWeights/Details Passat Gross vehicle weight Curb weight Maximum roof load Tank capacity Drag coefficient 2012 4387 lb 3165 - 3446 lb 220 lb 18.5 gal 0.291cd 2016 4519 lb 3206 - 3313 lb 220 lb 18.5 gal 029cd3 Engines and Transmissions1.8L TSI EngineTechnical Features • Cylinder head with integrated exhaust manifold • Roller bearing balance shafts • Smaller crankshaft main bearings with only four counterweights • Turbocharger with electrical wastegate flap actuation • Reduced oil pressure • Sump with upper aluminum section and lower plastic section • Accessory bracket with integrated oil filter and oil cooler • Total weight savings of 7.8 kg (17.2 lb) Technical Data Displacement Bore Stroke Valves Per Cylinder Compression Ratio Horsepower Torque Engine Management Fuel 1798 cm3 82.5 mm 84.1 mm 4 9.6:1 125 kW (170 hp) from 3,800 to 6,200 rpm 249 Nm (184 lb/ft) from 1,400 to 3,700 rpm SIMOS 18.1 Premium340 310 280 250 220 220 200 180 160s522_123Torque190 160 135 105 75 01000 2000 3000 4000 5000 6000120 100 80 60 40 0Emission Treatment Three-way catalytic converter, one upstream broadband lambda probe of the turbocharger and one step-type lambda probe downstream of the catalytic converter Emission Standard SULEVEngine Speed [rpm]4Horsepower140 Engines and Transmissions3.6L FSI EngineThe 3.6L FSI engine with 4-valves per cylinder is based on the VR engine series.Technical features • Oil pump output reduced and oil pressure lowered to 3.6 bar • Non-engaged chain tensioner • 89° opening temperature of coolant thermostat • One-part oil pump chain sprocket • Exhaust camshaft adjuster with 32° setting range • Vibration damper secured with 7 boltsS488_233Technical data Engine Code Type Displacement Bore Stroke Valves Per Cylinder Compression Ratio Maximum Output Maximum Torque Engine Management Fuel Exhaust Gas Treatment BWS 6-cylinder in-line engine 219.5 in3 (3597 cm3) 3.5 in (89 mm) 3.8 in (96.4 mm) 4 1 1 .4: 1 280 hp (206kW) at 6600 rpm 258 lb/ft(350Nm) at 2400 to 5300 rpm Bosch Motronic MED 1 7 . 1 Premium unleaded Three-way catalytic converter with lambda control ULEV 2Additional information on this engine is available in SSP 823603, the 3.2L and 3.6L Engines. Torque and power diagram 295 280 265 250 235 220 Torque 205 190 1 75 160 1 50 1000 3000 5000 Engine Speed [rpm] 320 295 270 240 21 5 Horsepower 185 160 135 1 10 80 55 7000S488_230Emissions Standard5 Engines and Transmissions2.0L TDI EngineTechnical Features • Camshaft bearings in camshaft housing (modular design) • Oil pump and vacuum pump in one housing with a shared drive shaft • Thermal management with switchable coolant pump • Intake manifold with water-cooled charge air cooler • Exhaust purification module with integrated oxidizing catalytic converter and diesel particulate filter • Low pressure exhaust gas recirculation • Balance shaft integrated in the cylinder block Technical Data Engine Code Design Displacement Bore Stroke Valves per Cylinder Compression Ratio Max. Output Max Torque Engine Management Fuel Exhaust Gas Aftertreatment Emissions Standard CRBC 4-cylinder inline engine 1968 cm3 81 .0 mm 95.5 mm 4 16.2: 1 1 50 hp (1 10kW) from 3500 - 4000 rpm 235 lb/ft (320 Nm) from 1 750 - 3000 rpm Bosch EDC 1 7 Ultra-Low Sulfur Diesel Exhaust gas recirculation, oxidizing catalytic converter, diesel particulate filter BIN5 Torque 190 160 130 100 75 45 1000 2000 3000 4000 Engine speed [rpm]S514_100s513_0562.0 TDI Engine 280 250 220 1 50 130 Horsepower 125 100 80 60 40 25 106 Engines and TransmissionsTransmission Type Technical DataThe 02Q transmission based on the 02M transmission. The gearshift shaft, the selector forks with stops in the housing, and the mounting have been changed. The transmission has been designed without a speedometer sensor (gets this signal from ESP control module).6-Speed Manual Transmission 02QThe 02E 6-speed dual clutch transmission is equipped with a hydraulic dual clutch. It combines the advantages of a manual transmission such as highefficiency, durability, and sportiness with the advantages of an automatic transmission such as increased comfort with ease of shifting.6-Speed Dual-Clutch Transmission 02E The 09G 6-speed automatic transmission is a compact, light, electronically controlled transmission for transverse installation. The 2012 Beetle utilizes the 2nd generation of this transmission. In the development of the transmission, the main focus was on reducing consumption and reducing CO2 emissions. As a result of improved damping in the newly developed torque converter, the car can be driven with less fuel consumption when the lockup clutch is engaged, even in 2nd gear. Also, the newly developed linings of the multi-plate clutch and the friction-optimized bearings – in conjunction with low-friction oil – significantly increase efficiency.6-Speed Automatic Transmission 09G7 Running GearDriver Assistance Systems at a GlanceThe Passat has many new driver assistance systems. This SSP will provide a short overview of these systems.Driver Assistance Systems: • Front Assist with Autonomous Emergency Braking • Adaptive Cruise Control (ACC) • Lane Assist (Lane Departure Warning) • Blind Spot Monitoring • Rear Traffic Alert • Park Distance Control • Park Assist (Automatic Parking Assistant) These systems are described in detail in the Volkswagen Driver Assistance Systems SSP 890253None of these Driver Assist systems are designed to relieve the driver of any driving responsibilities!8 Running GearFront Assist OverviewThe Forward Collision Warning system is designed to alert the driver when the following distance is less than 0.9 seconds. A radar sensor in the front bumper is used to detect the distance between vehicles.The Front Assist system not only alerts the driver audibly and visually, but also has the capability to apply the brakes. The warning and brake applications occur in four stages: 1 . Visual and acoustic warning. Brake system prepares for braking 2. Brake jolt to further alert driver 3. Advanced automatic partial braking 4. Full braking to avoid a collision9 Running GearAdaptive Cruise Control OverviewThe Adaptive Cruise Control (ACC) system is designed to enhance the cruise control system by altering the vehicle speed to match the pace of traffic. When there is no traffic, the vehicle will maintain a preset speed, just like cruise control. If the ACC vehicle comes up on a slower vehicle, ACC will automatically match the speed of the slower vehicle and follow at a preset following distance. When the vehicle ahead is no longer there, ACC will speed up to maintain the preset speed. A radar sensor located at the front of the vehicle is constantly scanning to detect objects or vehicles ahead. The ACC multifunction steering wheel controls or stalk on the steering column allow for activation, deactivation and setting a preferred distance to the vehicle ahead. There are two main ACC system designs:ACC BasicWhen the ACC is actively regulating vehicle speed and the vehicle ahead slows, ACC can only reduce the speed to about 12 mph (18 km/h) before ACC speed regulation is deactivated and the driver is prompted to take control by visual and audible signals. ACC does not reduce vehicle speed to a standstill. The brake pedal must be pressed by the driver to fully stop the vehicle.s543_01 710 Running GearLane Assist OverviewThere are Lane Assist systems with different capabilities. For the 2016 Passat, the Lane Assist will both warn the driver and turn the steering wheel. The front camera at the base of the rearview mirror is constantly scanning the road ahead for lane markings. It processes these lane markings with other signals to determine if the vehicle is staying in the lane or leaving the lane.s543_021If the vehicle seems likely to leave the lane without driver input, the system automatically counteracts the steering to keep the vehicle in the lane. This countersteering is continual and gentle. However, it can be overridden by the driver at any time with relative ease.1 1 Running GearBlind Spot MonitoringThe Bind Spot Monitoring system uses radar sensors at the rear of the vehicle to continually scan for traffic next to and behind the vehicle. It warns the driver when a vehicle is in a “blind spot, ” helping to avoid accidents.Detection AreasThe system has an information stage and a warning stage. If the system detects a potential risk without a lane change being indicated (turn signal not activated), the driver is informed by the warning lamp in the corresponding exterior mirror housing. The warning stage is activated if there is a potentially hazardous situation and the driver indicates a lane change by using the corresponding turn signal.Information StageWarning Stages543_079s543_08112 Running GearRear Traffic Alert OverviewThe rear radar sensors used for Blind Spot Monitoring are also used for Rear Traffic Alert. Rear Traffic Alert warns of approaching vehicles when backing out of a parking spot. The radar sensors measure the distance and the speed difference between your vehicle and an approaching object and use this to calculate the time until a possible collision.13 Running GearPark Distance Control 360° OverviewPark Distance Control uses ultrasonic sensors to alert the driver of objects in front of and behind the vehicle when parking or backing up. In this section we will discuss the system that has 360° visibility. The 360° PDC monitors and displays the front, rear and sides of the vehicle.The Infotainment display of the side areas is calculated from the PDC sensors because their scanning does not include the vehicle sides. Objects that appear on the sides are remembered from the front or rear sensors, and move along the side based on driving direction, steering angle and the ABS system (distance).14 Running GearPark Assist OverviewPark Assist helps the driver to park a vehicle in parallel or perpendicular parking spots. It controls the vehicle steering while the driver must control the accelerator and brake inputs. This semi-automatic parking system allows for perpendicular parking (spaces 90° to the lane) and parallel parking on the right or left of the lane. It will not only park the vehicle, but can also be used to get the vehicle out of parking spots. Parking Distance Control (PDC) sensors sense the vehicle and open areas. This system has six sensors, just like the PDC 360° system. These side sensors are used to detect open spaces when the system is active. The sensor information, vehicle speed from the ABS Control Module and the steering angle is used to calculate the location of an open spot relative to the vehicle.Parallel ParkingPerpendicular Parkings516_038s516_039The Parallel Parking specifications are: • Vehicle length plus, • Extra space of at least 1.3 ft (0.4 m) at both the front and rear for maneuvering and safety • Maximum speed of 25 mph (40 km/h)The Perpendicular Parking specifications are: • Vehicle width plus, • Extra space of at least 1.1 ft (0.35 m) for maneuvering and safety • Maximum speed of 25 mph (40 km/h)1 5 Electrical SystemsDepending on the equipment level, the 2016 Passat has an alternator with either a 140 A or 180 A output. This alternator load is controlled by the Data Onboard Diagnostic Interface J533 using a LIN-Bus network. The battery is located in the engine compartment for all models except the V6 engine. The battery for the V6 engine is located in the luggage compartment.AlternatorElectrical Boxes Three electrical boxes/fuse holders distribute electricity in the vehicle: • SA - Located on the front of the electrical box in the engine compartment. Contains larger, higher voltage supply cables • SB - Located on the top of the electrical box in the engine compartment. Contains fuses and relays • SC - Located at the bottom left of the instrument panel. Contains relays and fuses Electrical Box with SA and SBTo find out the precise location of various fuses and relays, please refer to the relevant wiring diagram in ElsaPro.SA Electrical Distribution Panel16 Electrical Systemss545_010Relay and Fuse Holder SC at the Bottom Left of the Instrument Panel12 V Battery in Engine Compartment European Passat shown. Electrical components are in the same places.1 7 Electrical SystemsLighting SystemFront lights Two types of headlight are available for the 2016 Passat NMS: • Halogen headlights with conventional long-life bulbs • LED headlights using reflector technology Halogen headlights High Beam 65WMain Beam 55W Daytime Running Lamp and Turn Signal 24WFoglamps The foglamps have been redesigned and are located in the lower part of the bumper.18 Electrical SystemsLED Headlights The LED headlights have multiple LED components: • Main beams • High beams • Daytime running lights • Turn signal (orange)Daytime Running Light (2-Row LED)High BeamMain Beam Module (2 x 2-chip LED)Dipped Beam Module (2 x 4-chip LED)LED Chain, 12 Orange LEDs for Turn SignalMain Beam19 Electrical SystemsRear LightsTwo types of rear lights headlight are available for the 2016 Passat NMS: • Halogen rear lights with conventional long-life bulbs • LED rear lights Incandescent TaillampsReverse Light 16WRunning Light Accent LED Running Light/ Brake Light/ Turn Signal 21W Running Light 16W20 Electrical SystemsLED TaillampsRunning Light AccentBrake LightReverse LightTurn Signal21 Electrical SystemsNetwork designThe vehicle electrical system is very similar to the previous Passat NMS. The data bus diagnostic interface J533 is still the main Gateway to exchange information between the different CAN and LIN Busses.G A BCDF E A – Diagnosis CAN B - Powertrain CAN C – Instrument Cluster CAN D – Comfort CAN E – Extended CAN F – Infotainment CAN G – K-wire A-C = 500K Bit/s D-G = 100K Bit/sNew control modules are outlined in red.22 Electrical SystemsKey C AlternatorG397 Rain/Light Recognition Sensor J104 ABS Control Module J217 Transmission Control Module J234 Airbag Control Module J245 Power Sunroof Control Module J255 Climatronic Control Module J301 A/C Control Module J386 Driver Door Control Module J387 Front Passenger Door Control Module J428 Distance Regulation Control Module J453 Multifunction Steering Wheel Control Module J500 Power Steering Control Module J518 Access/Start Authorization Control Module J519 Vehicle Electrical System Control Module J527 Steering Column Electronics Control Module J533 Data Bus Onboard Diagnostic Interface J587 Selector Lever Sensor System Control Module J623 Engine Control Module J685 Front Information Display Control Head J743 DSG Transmission Mechatronic J764 Electronic Steering Column Lock Control Module J769 Lane Change Assistance Control Module J770 Lane Change Assistance Control Module 2 J791 Parallel Parking Assistance Control Module J794 Information Electronics Control Module J926 Drivers Side Rear Door Control Module J927 Passenger Side Rear Door Control Module J949 Control Module for Emergency Call Module and Communication Unit R12 Amplifier R189 Rearview Camera R242 Driver Assistance Systems Front Camera VP Y Virtual Pedal Analog Clock23 Electrical SystemsThe CAN-BusesPowertrain CAN-Bus The Powertrain CAN-Bus is relatively unchanged from the previous Passat with one exception; the Parallel Parking Assistant Control Module. This control module works with the Power Steering Control Module to turn the steering wheel when the parallel parking function is active. J533 J623 J743 J217 J104 J587 J234 J791 J500 Key J104 ABS Control Module J217 Transmission Control Module J234 Airbag Control Module J500 Power Steering Control Module J533 Data Bus Onboard Diagnostic Interface J587 Selector Lever Sensor System Control Module J623 Engine Control Module J743 DSG Transmission Mechatronic J791 Parallel Parking Assistance Control ModuleRunning Gear CAN-Bus The Passat NMS has an additional CAN-Bus to accommodate the driver’s assist functions. This CAN-Bus is the Running Gear CAN-Bus. This is the most substantial change to the networking system in the 2016 Passat NMS.J533 J428 R242 J770 J769Key J428 Distance Regulation Control Module J533 Data Bus Onboard Diagnostic Interface J769 Lane Change Assistance Control Module J770 Lane Change Assistance Control Module 2 R242 Driver Assistance Systems Front Camera24 Electrical SystemsInfotainment CAN-BusThe rearview is connected directly to the Control Module with Radio/Navigation Display Unit J506. The image processing and line overlays are performed within the Rearview Camera R189.J533 J949 R12 R189 J794/G683Key G683 Front Information Display Control Head J794 Information Electronics Control Module J533 Data Bus Inboard Diagnostic Interface J949 Control Module for Emergency Call Module and Communication Unit R R12 Radio AmplifierR189 Rearview CameraConvenience CAN-BusThe Convenience CAN-Bus is very similar to the previous Passat. However, the Virtual Pedal control module is added and connected directly to J518.KeyJ533G397 Rain/Light Recognition SensorJ764 J255/J301 J527 J453 J518 VP J519 G397 J386 J926 J387 J927J301 A/C Control Module J255 Climatronic Control Module J386 Driver Door Control Module J387 Front Passenger Door Control Module J453 Multifunction Steering Wheel Control Module J518 Access/Start Authorization Control Module J519 Vehicle Electrical System Control Module J527 Steering Column Electronics Control Module J533 Data Bus Onboard Diagnostic Interface J764 Electronic Steering Column Lock Control Module J926 Drivers Side Rear Door Control Module J927 Passenger Side Rear Door Control Module VP Virtual Pedal25 Electrical SystemsExtended CAN-BusThe Extended CAN-Bus contains the LIN-Bus control modules controlled directly from the Data Bus Onboard Diagnostic Interface J533. J533 acts as the load management and controls the alternator charging via LIN-Bus.J533 J245 Y CKey C Y Alternator Analog ClockJ245 Power Sunroof Control Module26 Electrical SystemsKeyless Access SystemsKESSEY “Keyless Access” The KESSEY keyless access system on the Passat provides for: • Vehicle access • Vehicle starting The KESSEY vehicle access system has the following: • A touch sensor/antenna in each front door handle • An access/start antenna in the console in front of the shifter • An access/start antenna in behind the back seat • An access/start antenna under the rear shelf • An access/start antenna integrated into the rear bumper • A start/stop button in the consoleAll of these components are connected to the Access/Start Authorization Control Module J518 except for the start/ stop button, which is connected to the Electronic Steering Column Lock Control Module J764.s542_042Key Interior Aerial External Aerial European Passat shown. Electrical components are in the same places on North American vehicles.27 Electrical SystemsKESSEY NetworkingJ743 J533 J764Driver Door HandleJ386J362G415 R134Passenger Door HandleE378 J519 J518G416 R135BumperE378Interior AerialsR136R137 R138 R139KeyKey E378 Start System button G415 Driver Exterior Door Handle Touch Sensor G416 Front Passenger Exterior Door Handle Touch Sensor J362 Anti-Theft Immobilizer Control Module J518 Access/Start Authorization Control Module J519 Vehicle Electrical System Control Module J533 Data Bus Onboard Diagnostic Interface J623 Engine Control Module J743 DSG Transmission Mechatronic J764 Electronic Steering Column Lock Control Module R134 Driver Access/Start System Antenna R135 Front Passenger Access/Start System Antenna R136 Access/Start System Antenna in Rear Bumper Sensor wire Actuator Low Frequency (LF) High Frequency (HF) CAN-Bus wire R137 Access/Start System Antenna in Luggage Compartment R138 Access/Start System Antenna 1 in Vehicle Interior R139 Access/Start System Antenna 2 in Vehicle Interior28 Electrical SystemsLocking/Unlocking Authorization ProcedureThe detection area of the exterior antennas is approximately 5 ft (1 .5 m). The Passat has exterior antennas in the front door handles and in the trunk area. There are three interior antennas that cover the inside of the vehicle. When an exterior antenna picks up key signal plus an input from an exterior antenna, it sends this signal to the vehicle Access/ Start Control Module J518. J518 sends this signal across the CAN-Bus to the Vehicle Electrical System Control Module J519. J519 sends a signal out to the key, and the key sends a signal back to J519 for authentication. J519 validates the key and locks or unlocks the doors or trunkapprox. 1 .5 ms545_06029 Electrical SystemsStarting Authorization ProcedureTurning ON Terminal 15 The Start System Button E378 is pressed. The Access/Start Authorization Control Module J518 processes the signal, wakes the convenience CAN-Bus and asks the Anti-Theft Immobilizer Control Module J362 it terminal 1 5 can be turned ON. To determine whether there are authorized keys inside the vehicle, J518 transmits the search pattern (LF signal of 125 kHz) via the interior aerials for the keys already matched. The authorized key recognizes its signal pattern and sends its transponder data at a frequency of 433 MHz to J519. J519 forwards this transponder data to J362. J362 verifies the transponder data. If the key is authorized, J362 sends the command via the convenience CAN-Bus for release of the electric steering column to the Electronic Steering Column Lock Control Module J764. This same message is transmitted to the Vehicle Electrical System Control Module J519 and, at the same time, also via a discrete wire so that terminal 1 5 is turned ON. The remaining CAN-Buses are woken by the Data-Bus Onboard Diagnostic Interface J533.Starting the Engine As soon as all of the data buses are awake, immobilizer communication across all buses can take place. The Anti-Theft Immobilizer Control Module J362 authorizes the ECM to start the engine if the data match is successful. If the DSG Transmission Mechatronic J743 is installed, it sends its query and authorisation request to J362.30 Electrical SystemsVirtual PedalThe Virtual Pedal function opens the trunk when an authorized key is in the vicinity, and a certain motion is performed. The motion is sensed using a capacitive sensor under the rear bumper, which recognizes certain movements in the rear area of the vehicle. The capacitive sensor is connected to the Access/Start Authorization Control Module J518. The sensor has two electrodes that work on the capacitor principle. If an object is brought into the vicinity of the two electrodes, the capacity of the sensor changes and so does its current flow.Prerequisite The Virtual Pedal function is only active if: • There is an authorized remote control key within 1.5 m of the rear of the vehicle • The speed of the vehicle equals 0 km/h • The ignition (term. 15) is OFF • The engine is OFFTerminal 1 5 offVirtual Pedal Opens545_13831 Electrical SystemsFunction The user stands in the center of the rear of the vehicle and sweeps a leg quickly to the bumper and back. The shin bone enters the area of the capacitive sensor. The sensor and the rear lid trunk release recognize movement and send a signal to the Access/Start Authorization Control Module J518. Using the Access/Start System Antenna in Rear Bumper R136 (LF signal with 125 kHz), J518 checks whether there is at least one remote control key in the rear area. If an authorized key is detected, the 3rd brake light lights up (in the upper area of the rear window) and the rear lid latch releases. This will take place even if the vehicle is locked.s545_02132 Infotainment SystemsModular Infotainment Matrix (MIB) IIThe 2016 Passat NMS has three different MIB II Infotainment Systems available: These are: • Composition Color • Composition Media • Discover MediaSome MIB II overview information is presented in the following pages. More details about these systems can be found in the SSP 8901 53, the Volkswagen MIB II Infotainment System.MIB II ConfigurationThe MIB configuration for the Passat is slightly different than MQB vehicles. All versions are a single unit, located in the dash. This unit has all CD/DVD and SD card slots located in the infotainment face.33 Infotainment SystemsComposition ColorTechnical Features • 5-inch color resistive touchscreen • Six side keys for functions • Single-disc, MP3 compatible CD player • Eight speakers (4 X 20 Watt output) • AUX-IN and SD card slot in radio face • One USB input that operates like an AUX-IN input, but provides charging capability • Bluetooth with audio capability (HFP, A2DP, PBAP, AVRCP) • Static display of photo files using SD card (JPEG and PNG) • Double tuner with phase diversity for radio signal reception • Not compatible with Car-Net features • No hard drive storage for music or image files34 Infotainment SystemsComposition MediaTechnical Features All functions of the Composition Color plus: • 6.5 or 6.33-inch capacitive touchscreen with proximity sensors, depending on model • Swipe and zoom gesture capability • Golf models have (1) SD and (1) CD input in glove box. All other versions have (1) SD and (1) CD in the face of the MIB unit • Golf models will have the CAR hard key on the face of the MIB unit. Other models will access CAR menus using the MFI • 1 smartphone-compatible USB port. – This port is backwards compatible and will charge and import media from iPods, MP3 devices, etc. using the device’s USB cable. It operates like the MDI in previous vehicles – iPods and other media devices are not integrated into App-Connect and can be accessed through the Media hardkey – More USB ports may be available depending on model and trim • Eight side keys for functions. Hardkeys may vary between MQB and non-MQB units • Compatible with Car-Net App-Connect, Security and Service features. MQB models offer the ThinkBlue Trainer for eco-tips35 Infotainment SystemsDiscover MediaTechnical Features All functions of the Composition Media plus: • Navigation module with 2D/3D map display • Navigation can be entered in a single string of text instead of needing to enter state, city and street first • Three routes can be calculated: – Shortest time – Shortest distance – Economical • Speed limit display • Dynamic route guidance (four years no charge, using Sirius Traffic) • Sirius Travel Link • Preset Point of Interests (POIs) • Completely Car-Net compatible: – App-Connect – Guide and Inform – Security and Service • Golf models have two SD card inputs and a CD input in glove box. All other versions have SD and CD slots in the face of the MIB unit – Either SD input can be used for navigation data36 ServiceSWaP (SoftWare as a Product)Starting in MY 201 5, some Volkswagen vehicles will begin coming with a feature called SWaP. This feature allows certain vehicle functions to be unlocked using a purchased code, sometimes additional parts and a scan tool. The SWaP functions for 2015 are based around the Driver Assistance Systems and the MIB II Infotainment Systems. At the time of publication the following SWaP capabilities were possible: • MIB II – Voice Recognition – Navigation • Driver Assistance Systems – Enabling of Adaptive Cruise Control, requires Front Assist already installed and additional parts such as steering wheel buttonsSWaP ProcedureThe SWaP Procedure is relatively straightforward. 1 . Determine if the vehicle is capable of activating the function 2. If the vehicle is capable, a SWaP code is purchased from the parts department for the desired function. If necessary, additional parts are ordered for installation 3. Any additional parts are installed on the vehicle 4. A special program is run using Software Version Management in ODIS Service 5. The code is entered 6. The VIN and code are sent to the FAZIT server, the License server and the Carport servers in Germany for validation 7 . The function is activated in the vehicle 8. The VWAG servers update the vehicle profile with the new function and the PR number is added to the vehicle buildThe approximate cost for the SWaP enabling is about the same as if the customer had ordered the vehicle with that function. Note that additional SWaP capabilities will be added in the future.37 Knowledge AssessmentAn on-line Knowledge Assessment (exam) is available for this Self-Study Program. The Knowledge Assessment may or may not be required for Certification. You can find this Knowledge Assessment at: www.vwwebsource.comFor Assistance, please call: Volkswagen Academy Certification Program Headquarters 1-877-791-4838 (8:00 a.m. to 8:00 p.m. EST)Or, E-mail: concierge@volkswagenacademy.com38 Important Linkshttps://www.datarunners.net/vw_crc/default.asp?pageid=homewww.vwwebsource.comwww.vwhub.com Volkswagen Group of America 2200 Ferdinand Porsche Drive Herndon, VA 20171 September 2015